| BLUESIL ADD 10086 | Elkem Silicones | BLUESIL ADD 10086 is a polydimethylsiloxane gum in solvent solution especially developed to obtain hammer effects in combination with thixotropic polyurethane bases. It is also suitable for use with classical, polyurethane bases, thixotropic alkyd paints ...展开 BLUESIL ADD 10086 is a polydimethylsiloxane gum in solvent solution especially developed to obtain hammer effects in combination with thixotropic polyurethane bases. It is also suitable for use with classical, polyurethane bases, thixotropic alkyd paints and silicone binders. 收起 | |
| BLUESIL ADD 11013 | Elkem Silicones | BLUESIL ADD 11013 is a polyether-modified polydimethylsiloxane for use in solventless paints and varnishes, and in water-based paints and inks. | |
| BLUESIL BP 9200 | Elkem Silicones | BLUESIL BP 9200 is a solventless alkylpolysiloxane oligomer designed to enhance durability of construction materials as formed hard adhesion repellency layer through deep penetration. | |
| BLUESIL BP 9300 | Elkem Silicones | BLUESIL BP 9300 is a solventless alkylpolysiloxane oligomer designed to enhance durability of construction materials as formed hard adhesion repellency layer through deep penetration. | |
| BLUESIL BP 9705 | Elkem Silicones | BLUESIL BP 9705 is a non ionic, APEO free, polyorganosiloxane aqueous emulsion, to be used as a water repellent additive in various formulations for building materials. | |
| BLUESIL BP 9710 | Elkem Silicones | BLUESIL BP 9710 is an emulsion with an alkylpolysiloxane oligomer base designed to protect surfaces against moisture. This waterproofing system respects the environment since it is entirely formulated in a water base, it is free of any organic solvent and...展开 BLUESIL BP 9710 is an emulsion with an alkylpolysiloxane oligomer base designed to protect surfaces against moisture. This waterproofing system respects the environment since it is entirely formulated in a water base, it is free of any organic solvent and it does not contain ecotoxic surfactant. After it has dried on the surface, BLUESIL BP 9710 repels water and allows walls to breathe. Experience acquired over more than 40 years shows that silicone water repellents are a good answer to humidity problems in construction materials, particularly when for esthetical reasons the natural aspect of the material should be preserved. BLUESIL BP 9710 has been awarded a test certificate by CSTC (Centre Scientifique et Technique de - ): ref HD-340/133-151 on the 2006.02.20. 收起 | |
| BLUESIL BP 9800 | Elkem Silicones | BLUESIL BP 9800 is an aqueous APE-free polymethylsiloxane resin emulsion. This emulsion is designed for use in facade coatings, to optimise the balance between water repellency and water vapour permeability. | |
| BLUESIL BP 9821 | Elkem Silicones | BLUESIL BP 9821 is an aqueous APE-free polymethylsiloxane resin emulsion with low VOC content. This emulsion is designed for use in facade coatings, to optimise the balance between water repellency and water vapour permeability. | |
| BLUESIL BP 9878 | Elkem Silicones | BLUESIL BP 9878 is an aqueous polymethylsiloxane resin emulsion.This emulsion provides two fundamental properties of the silicone technology to the paint film: water repellency and permeability to water vapour. | |
| BLUESIL BP 9900 | Elkem Silicones | BLUESIL BP 9900 is a non ionic, APEO free, polyorganosiloxane aqueous emulsion, to be used as a water repellent additive for building materials. | |
| BLUESIL BP 9920 | Elkem Silicones | BLUESIL BP 9920is anon-ionic, APEO free, polyorganosiloxane aqueous emulsion, to be used as a water repellent additive in various formulations for building materials. | |
| BLUESIL EMUL 1803 | Elkem Silicones | BLUESIL EMUL 1803 is a non-ionic silicone emulsion containing silicone oil and resin. This emulsion is intended for mould-release of cast polyurethane elastomers. | |
| BLUESIL EMUL 269 | Elkem Silicones | BLUESIL EMUL 269 is an aqueous emulsion of an hydrogeno polysiloxane. | |
| BLUESIL EMUL 284 | Elkem Silicones | BLUESIL EMUL 284 is a slightly ionic oil-in-water type emulsion of a high viscosity a/w-hydroxydimethylpolysiloxane fluid. BLUESIL EMUL 284 is characterised by its reactivity, its outstanding stability, its lubricating power and its fabric softening prop...展开 BLUESIL EMUL 284 is a slightly ionic oil-in-water type emulsion of a high viscosity a/w-hydroxydimethylpolysiloxane fluid. BLUESIL EMUL 284 is characterised by its reactivity, its outstanding stability, its lubricating power and its fabric softening properties (textile applications). 收起 | |
| BLUESIL EMUL 3500 | Elkem Silicones | BLUESIL EMUL 3500 is a general purpose; non-ionic oil in water silicone emulsion, of a high viscosity hydroxyl terminated polysiloxane. | |
| BLUESIL EMUL 35B | Elkem Silicones | BLUESIL EMUL 35B is an oil-in-water emulsion containing 35 % silicone oil, which is diluted for use, generally in a proportion of one part of BLUESIL EMUL 35B to 20 to 200 parts of water. Its characteristics are as follows:Practically no tendency to cream...展开 BLUESIL EMUL 35B is an oil-in-water emulsion containing 35 % silicone oil, which is diluted for use, generally in a proportion of one part of BLUESIL EMUL 35B to 20 to 200 parts of water. Its characteristics are as follows:Practically no tendency to cream, neither during storage nor in use.Perfect stability in contact with hard water or zinc (i.e. in galvanized metal containers).Excellent heat stability after dilution.Very good wetting power. 收起 | |
| BLUESIL EMUL 55 | Elkem Silicones | BLUESIL EMUL 55 is a non-ionic, silicone oil-based aqueous emulsion with 35 % active material. It is mainly used as a mould-stripping agent in foundries, and also has applications in the rubber and plastics industries. Moreover, it is one of the component...展开 BLUESIL EMUL 55 is a non-ionic, silicone oil-based aqueous emulsion with 35 % active material. It is mainly used as a mould-stripping agent in foundries, and also has applications in the rubber and plastics industries. Moreover, it is one of the component elements making up polishes and cleaners for artificial leather fabrics (PVC, PUR) and furniture polishes. 收起 | |
| BLUESIL EMUL 872 | Elkem Silicones | BLUESIL EMUL 872 is a slightly anionic aqueous emulsion with a 60% dry content, for general purposes. This is a concentrated version of BLUESIL EMUL E1P. | |
| BLUESIL EMUL E1P | Elkem Silicones | BLUESIL EMUL E1P is an oil in water emulsion containing 35 % of a silicone oil. It can be used in many industries. | |
| BLUESIL EMUL E1P U1 | Elkem Silicones | BLUESIL EMUL E1P U1 is a general purpose, non-ionic, aqueous silicone emulsion. | |
| BLUESIL EMULSION 2400 | Elkem Silicones | BLUESIL EMUL 2400 is a general purpose; non-ionic oil in water silicone emulsion of a methyl-hydrogen polysiloxane. | |
| BLUESIL FLD 21625 | Elkem Silicones | BLUESIL FLD 21625is anα/ω-epoxy functionalised polydimethylsiloxane fluid. | |
| BLUESIL FLD 45 | Elkem Silicones | BLUESIL FLD 45 is a low viscosity dimethylpolysiloxane oil used to prevent floating and flooding and improve leveling of air-drying paints. | |
| BLUESIL FLD 47V1 000 | Elkem Silicones | BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids. | |
| BLUESIL FLD 47V100 | Elkem Silicones | BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids. | |
| BLUESIL FLD 47V350 | Elkem Silicones | BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids. | |
| BLUESIL FLD 47V50 | Elkem Silicones | BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids. | |
| BLUESIL FLD 47V500 | Elkem Silicones | BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids. | |
| BLUESIL PI 2074 | Elkem Silicones | BLUESIL PI 2074 is a cationic photoinitiator for use with epoxy resins, vinyl ethers or any other type of oligomer which polymerises cationically. It is also suited to the formulation of hybrid radical / cationic systems. | |
| BLUESIL RES 6405 | Elkem Silicones | BLUESIL RES 6405 is a 50% solids methylphenylsilicone resin in Toluene (6405) or Xylene solution (6405X). This resin is ideal for the formulation of heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 6405X | Elkem Silicones | BLUESIL RES 6405X is a 50% solids methylphenylsilicone resin in Toluene (6405) or Xylene solution (6405X). This resin is ideal for the formulation of heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 6406XM | Elkem Silicones | BLUESIL RES 6406XM is a 60% solids methylphenylsilicone resin in Xylene solution. This resin is designed to formulate heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 6407 | Elkem Silicones | BLUESIL RES 6407 is a 70% solids methylphenylsilicone resin in Toluene solution. This resin is designed to formulate heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 6482X | Elkem Silicones | BLUESIL RES 6482X is a reactive silicone resin which was developed for use in the manufacture of decorative medium temperature paints. Currently this resin is mainly used for the manufacture of air drying, temperature resistant silicone alkyd paints. It i...展开 BLUESIL RES 6482X is a reactive silicone resin which was developed for use in the manufacture of decorative medium temperature paints. Currently this resin is mainly used for the manufacture of air drying, temperature resistant silicone alkyd paints. It is also more compatible than other silicones with urea-formaldehyde, melamine-formaldehyde, epoxy, polyurethane and acrylic resins. Another use is as an additive for epoxy paints. It also improves weathering resistance. 收起 | |
| BLUESIL SP 3300 | Elkem Silicones | BLUESIL SP 3300 is a non hydrolysable silicone polyether copolymer. | |
| BLUESIL SP 3300 | Elkem Silicones | BLUESIL SP 3300 is a non hydrolysable silicone polyether copolymer. | |
| BLUESIL SP 3303 | Elkem Silicones | BLUESIL SP 3303 is a polyether modified polysiloxane. | |
| BLUESIL SP 3303 | Elkem Silicones | BLUESIL SP 3303 is a polyether modified polysiloxane. | |
| BLUESIL SP 3307 | Elkem Silicones | BLUESIL SP 3307 is a polyether modified polysiloxane. | |
| BLUESIL SP 3307 | Elkem Silicones | BLUESIL SP 3307 is a polyether modified polysiloxane. | |
| BLUESIL SP 3309 | Elkem Silicones | BLUESIL SP 3309 is a polyether modified trisiloxane. | |
| BLUESIL TCS 7001 | Elkem Silicones | BLUESIL TCS 7001 is an alkyl polysiloxane solution in solvent phase specifically developed for the waterproofing of fabrics and leathers exposed to difficult weather conditions by spraying or impregnating. | |
| CAF 2534 | Elkem Silicones | CAF 2534 is a one component silicone rubber that cures when in contact with air humidity. It is intended for use as a formulation base for the development of tie-coats in the fouling release treatment of boat hulls. | |
| JMT-150ANO | Tayca Corporation | JMT-150ANO is a cationic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150AO | Tayca Corporation | JMT-150AO is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150FI | Tayca Corporation | JMT-150FI is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150IB | Tayca Corporation | JMT-150IB is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JR-301 | Tayca Corporation | JR-301 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .3µm particle...展开 JR-301 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .3µm particle size and 18 g/100g of oil absorption. 收起 | |
| JR-403 | Tayca Corporation | JR-403 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average ....展开 JR-403 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25µm particle size and 19 g/100g of oil absorption. 收起 | |
| JR-405 | Tayca Corporation | JR-405 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .21µm particl...展开 JR-405 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .21µm particle size and 15 g/100g of oil absorption. 收起 | |
| JR-600A | Tayca Corporation | JR-600A is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm partic...展开 JR-600A is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particle size and 19 g/100g of oil absorption. 收起 | |
| JR-600E | Tayca Corporation | JR-600E is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .27µm partic...展开 JR-600E is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .27µm particle size and 21 g/100g of oil absorption. 收起 | |
| JR-603 | Tayca Corporation | JR-603 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and zirconium with an average...展开 JR-603 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and zirconium with an average .28µm particle size and 21 g/100g of oil absorption. 收起 | |
| JR-605 | Tayca Corporation | JR-605 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particl...展开 JR-605 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particle size and 19 g/100g of oil absorption. 收起 | |
| JR-701 | Tayca Corporation | JR-701 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an av...展开 JR-701 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an average .27µm particle size and 20 g/100g of oil absorption. 收起 | |
| JR-800 | Tayca Corporation | JR-800 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .27...展开 JR-800 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .27µm particle size and 29 g/100g of oil absorption. 收起 | |
| JR-805 | Tayca Corporation | JR-805 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .29...展开 JR-805 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .29µm particle size and 22 g/100g of oil absorption. 收起 | |
| JR-806 | Tayca Corporation | JR-806 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25...展开 JR-806 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25µm particle size and 21 g/100g of oil absorption. 收起 | |
| JRNC | Tayca Corporation | JRNC is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an aver...展开 JRNC is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an average .27µm particle size and 21 g/100g of oil absorption. 收起 | |
| K-White #105 | Tayca Corporation | K-White #105 is a white powder aluminum triphosphate with an average particle size of 1.6 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White #105 is a white powder aluminum triphosphate with an average particle size of 1.6 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #140W | Tayca Corporation | K-White #140W is a white powder aluminum triphosphate with an average particle size of 2.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White #140W is a white powder aluminum triphosphate with an average particle size of 2.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #450H | Tayca Corporation | K-White #450H is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White #450H is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #82 | Tayca Corporation | K-White #82 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #82 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #84 | Tayca Corporation | K-White #84 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #84 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #84S | Tayca Corporation | K-White #84S is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White #84S is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #85 | Tayca Corporation | K-White #85 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #85 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #94 | Tayca Corporation | K-White #94 is a white powder aluminum triphosphate with an average particle size of 6.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #94 is a white powder aluminum triphosphate with an average particle size of 6.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White Ca650 | Tayca Corporation | K-White Ca650 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White Ca650 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White G105 | Tayca Corporation | K-White G105 is a white powder aluminum triphosphate with an average particle size of 2.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White G105 is a white powder aluminum triphosphate with an average particle size of 2.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| LYNDCOAT 15 RTU | Elkem Silicones | LYNDCOAT 15 RTU is a ready to use water-based coating designed for use in tire molds. It is a blend of polymers that cures at typical molding temperatures to form a clear, tough bond possessing excellent release and lubrication properties. Lyndcoat™ 15 RT...展开 LYNDCOAT 15 RTU is a ready to use water-based coating designed for use in tire molds. It is a blend of polymers that cures at typical molding temperatures to form a clear, tough bond possessing excellent release and lubrication properties. Lyndcoat™ 15 RTU also helps keep molds and vents clean, reducing defects and downtime. Lyndcoat™ 15 RTU typically is durable through multiple production cycles. The need for reapplication is dependent on factors such as the rubber compound, curing time, curing temperature, tread design and application technique. Lyndcoat™ 15 RTU is designed for processes requiring low viscosity mold lubricants. 收起 | |
| LYNDCOAT BR 1100 RTU | Elkem Silicones | LYNDCOAT BR1100 RTU is a ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR1100 RTU replaces the c...展开 LYNDCOAT BR1100 RTU is a ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR1100 RTU replaces the conventional lining cements and solvent based band ply lubricants, eliminating the problems of flammability, toxicity, and dusty/flaky residues. Lyndcoat™ BR1100 RTU does not contain aromatic or chlorinated solvents. It is easy to use and is recommended for a single release application. It can be brushed, swabbed, or sprayed onto the rubber surface. Lyndcoat™ BR1100 RTU is of high viscosity and does not contain mica. For maximum release and bladder life, the use of a durable bladder pre-treatment such as Lyndcoat™ BR2101 RTU is highly recommended. 收起 | |
| LYNDCOAT BR 1102 | Elkem Silicones | LYNDCOAT BR1102 RTU is a ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR1102 RTU replaces the c...展开 LYNDCOAT BR1102 RTU is a ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR1102 RTU replaces the conventional lining cements and solvent based band ply lubricants, eliminating the problems of flammability, toxicity, and dusty/flaky residues. Lyndcoat™ BR1102 RTU does not contain aromatic or chlorinated solvents. It is easy to use and is recommended for a single release application. It can be brushed, swabbed, or sprayed onto the rubber surface. Lyndcoat™ BR1102 RTU is of medium viscosity and does not contain mica. 收起 | |
| LYNDCOAT BR 1103 RTU | Elkem Silicones | LYNDCOAT BR1103 RTU is a ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. LYNDCOAT® BR1103 RTU replaces the c...展开 LYNDCOAT BR1103 RTU is a ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. LYNDCOAT® BR1103 RTU replaces the conventional lining cements and solvent based band ply lubricants, eliminating the problems of flammability, toxicity, and dusty/flaky residues. LYNDCOAT® BR1103 RTU does not contain aromatic or chlorinated solvents. It is easy to use and is recommended for a single release application. It can be brushed, swabbed, or sprayed onto the rubber surface. LYNDCOAT® BR1103 RTU is of high viscosity and does not contain mica. For maximum release and bladder life, the use of a durable bladder pre-treatment such as LYNDCOAT® BR2201 RTU is highly recommended. 收起 | |
| LYNDCOAT BR 1110 RTU | Elkem Silicones | LYNDCOAT is a ready to use, silicone based, high mica content release coating for butyl rubber bladders typically used in tire curing presses. It is an aqueous system that cures during the tire vulcanization process to a tightly bound coating that offers ...展开 LYNDCOAT is a ready to use, silicone based, high mica content release coating for butyl rubber bladders typically used in tire curing presses. It is an aqueous system that cures during the tire vulcanization process to a tightly bound coating that offers excellent release properties and lubricity. In addition, the product promotes air bleed and reduces defects caused by trapped air and buckled bladders. LYNDCOAT BR 1110 RTU replaces conventional lining cements and solvent based band ply lubricants, eliminating the flammability and toxicityproblems associated with these kinds of products. LYNDCOAT BR 1110 RTU is easy to use and is recommended for a single release application. It can be brushed, swabbed or sprayed onto the rubber surface. For maximum release and bladder life, the use of a durable bladder pre-treatment, such as LYNDCOAT BR 2101 RTU, is highly recommended. 收起 | |
| LYNDCOAT BR 1211 | Elkem Silicones | LYNDCOAT BR1211 is a ready to use, water based band ply lubricant. It is part of the new generation reactive silicone emulsions allowing for low coating weights. It was designed for improved bladder protection, a clean operation and reduced press downtim...展开 LYNDCOAT BR1211 is a ready to use, water based band ply lubricant. It is part of the new generation reactive silicone emulsions allowing for low coating weights. It was designed for improved bladder protection, a clean operation and reduced press downtimes. Applied on the inside of the green tire, or directly on the bladder, it insures excellent release, slip and air bleed performance. 收起 | |
| LYNDCOAT BR 1214 | Elkem Silicones | LYNDCOAT BR 1214 is a ready to use, water based band ply lubricant. It is part of the new generation reactive silicone emulsions allowing for low coating weights. It is particularly friction resistant and slip promoting. Applied on the inside of the green...展开 LYNDCOAT BR 1214 is a ready to use, water based band ply lubricant. It is part of the new generation reactive silicone emulsions allowing for low coating weights. It is particularly friction resistant and slip promoting. Applied on the inside of the green tire, or directly on the bladder, it insures excellent release, slip and air bleed performance. 收起 | |
| LYNDCOAT BR 1623 RTU | Elkem Silicones | LYNDCOAT BR 1623 RTU is a ready to use, silicone based, medium mica content release coating for butyl rubber bladders typically used in tire curing presses. It is an aqueous system that cures during the tire vulcanization process to a tightly bound coatin...展开 LYNDCOAT BR 1623 RTU is a ready to use, silicone based, medium mica content release coating for butyl rubber bladders typically used in tire curing presses. It is an aqueous system that cures during the tire vulcanization process to a tightly bound coating that offers excellent release properties and lubricity. In addition, the product promotes air bleed and reduces defects caused by trapped air and buckled bladders. Lyndcoat BR 1623 RTU replaces conventional lining cements and solvent based band ply lubricants, eliminating the flammability and toxicityproblems associated with these kinds of products. Lyndcoat BR 1623 RTU is easy to use and is recommended for a single release application. It can be brushed, swabbed or sprayed onto the rubber surface. For maximum release and bladder life, the use of a durable bladder pre-treatment, such as Lyndcoat XR 3900 Primer, is highly recommended. 收起 | |
| LYNDCOAT BR 1812 | Elkem Silicones | LYNDCOAT BR 1812 is a durable, ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR 1812 RTU replace...展开 LYNDCOAT BR 1812 is a durable, ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR 1812 RTU replaces the conventional lining cements and solvent-based band ply lubricants, eliminating the problems of flammability, toxicity, and dusty/flaky residues. Lyndcoat™ BR 1812 RTU does not contain aromatic or chlorinated solvents. It is easy to use and can be brushed, swabbed or sprayed onto the rubber surface, remaining effective through multiple curing cycles. The cycles between applications depend on application efficiency, curing time, curing temperature, tire construction and composition, and condition. Lyndcoat™ BR 1812 RTU is of low viscosity and does not contain mica. It has been shown to increase productivity, improve tire aesthetics and appearance, prolong bladder life, and reduce costs. 收起 | |
| LYNDCOAT BR 2100 RTU | Elkem Silicones | LYNDCOAT BR 2100 RTU is a solvent free, silicone based, ready to use, bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it insures durable performance. | |
| LYNDCOAT BR 2104 | Elkem Silicones | LYNDCOAT BR 2104 is a solvent free, silicone based, ready to use, inside paint and bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it insures a long lasting multi release and slip performance. It was designed to...展开 LYNDCOAT BR 2104 is a solvent free, silicone based, ready to use, inside paint and bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it insures a long lasting multi release and slip performance. It was designed to reduce build up notably in the bead area. 收起 | |
| LYNDCOAT BR 2201 | Elkem Silicones | LYNDCOAT BR 2201 is a durable, ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. LYNDCOAT® BR 2201 replaces t...展开 LYNDCOAT BR 2201 is a durable, ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. LYNDCOAT® BR 2201 replaces the conventional lining cements and solvent based band ply lubricants, eliminating the problems of flammability, toxicity, and dusty/flaky residues. LYNDCOAT® BR 2201 does not contain aromatic or chlorinated solvents. It is easy to use and can be brushed, swabbed, or sprayed onto the rubber surface, remaining effective through multiple curing cycles. The cycles between applications depend on application efficiency, curing time, curing temperature, tire construction and composition, and condition. LYNDCOAT® BR 2201 is of high viscosity and does not contain mica. It has been shown to increase productivity, improve tire aesthetics and appearance, prolong bladder life, and reduce costs. 收起 | |
| LYNDCOAT BR 2204 A1 | Elkem Silicones | LYNDCOAT BR 2204 is a solvent free, silicone based, ready to use, inside paint and bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it insures a multi release and slip performance. It was designed to reduce build...展开 LYNDCOAT BR 2204 is a solvent free, silicone based, ready to use, inside paint and bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it insures a multi release and slip performance. It was designed to reduce build up notably in the bead area. 收起 | |
| LYNDCOAT BR 2204 E4 | Elkem Silicones | LYNDCOAT BR 2204 E4 is a solvent free, silicone based, ready to use, inside paint and bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it insures a multi release and slip performance. It was designed to reduce b...展开 LYNDCOAT BR 2204 E4 is a solvent free, silicone based, ready to use, inside paint and bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it insures a multi release and slip performance. It was designed to reduce build up notably in the bead area. 收起 | |
| LYNDCOAT BR 2511 RTU | Elkem Silicones | LYNDCOAT BR2511 RTU is a solvent free, silicone based, ready to use, bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it combines long lasting multi release with excellent slip and exceptional air bleed performan...展开 LYNDCOAT BR2511 RTU is a solvent free, silicone based, ready to use, bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it combines long lasting multi release with excellent slip and exceptional air bleed performance. 收起 | |
| LYNDCOAT BR 2512 | Elkem Silicones | LYNDCOAT BR2512 is a solvent free, silicone based, ready to use, bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it combines particularly long lasting multi release and slip with exceptional air bleed performanc...展开 LYNDCOAT BR2512 is a solvent free, silicone based, ready to use, bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it combines particularly long lasting multi release and slip with exceptional air bleed performance. 收起 | |
| LYNDCOAT BR 601 RTU | Elkem Silicones | LYNDCOAT BR-601 RTU is a durable, ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR-601 RTU rep...展开 LYNDCOAT BR-601 RTU is a durable, ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR-601 RTU replaces the conventional lining cements and solvent-based band ply lubricants, eliminating the problems of flammability, toxicity, and dusty/flaky residues. Lyndcoat™ BR-601 RTU does not contain any solvents. It is easy to use and can be brushed, swabbed or sprayed onto the rubber surface, remaining effective through multiple curing cycles. The cycles between applications depend on application efficiency, curing time, curing temperature, tire construction and composition, and condition. Lyndcoat™ BR-601 RTU is of medium viscosity and does not contain mica. It has been shown to increase productivity, improve tire aesthetics and appearance, prolong bladder life, and reduce costs. 收起 | |
| LYNDCOAT BR 790 RTU | Elkem Silicones | LYNDCOAT BR 790 RTU is a durable, ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR-790 RTU rep...展开 LYNDCOAT BR 790 RTU is a durable, ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR-790 RTU replaces the conventional lining cements and solvent based band ply lubricants, eliminating the problems of flammability, toxicity, and dusty/flaky residues. Lyndcoat™ BR-790 RTU does not contain any solvents. It is easy to use and can be brushed, swabbed or sprayed onto the rubber surface, remaining effective through multiple curing cycles. The cycles between applications depend on application efficiency, curing time, curing temperature, tire construction and composition, and condition. Lyndcoat™ BR-790 RTU is of low viscosity and does not contain mica. It has been shown to increase productivity, improve tire aesthetics and appearance, prolong bladder life, and reduce costs. 收起 | |
| LYNDCOAT MR 5100 RTU | Elkem Silicones | LYNDCOAT MR 5100 RTU is a ready to use, solvent free, water based coating designed for use in tire moulds. It is a blend of polymers that cure at typical molding temperatures to form a clear, tough, coating with a strong bond to the metal mould, possessin...展开 LYNDCOAT MR 5100 RTU is a ready to use, solvent free, water based coating designed for use in tire moulds. It is a blend of polymers that cure at typical molding temperatures to form a clear, tough, coating with a strong bond to the metal mould, possessing excellent release and lubrication properties towards rubber. LYNDCOAT MR 5100 RTU helps keep moulds and vents clean, which reduces defects and downtime. LYNDCOAT MR 5100 RTU is durable through multiple production cycles. The need for reapplication is dependent on factors such as: the rubber compound, tread design, curing time, curing temperature, application technique and press type. LYNDCOAT MR 5100 RTU is designed for processes requiring low viscosity mould lubricants. 收起 | |
| MSN-002 | Tayca Corporation | MSN-002 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSN-003 | Tayca Corporation | MSN-003 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSN-007 | Tayca Corporation | MSN-007 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-001 | Tayca Corporation | MSP-001 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-005 | Tayca Corporation | MSP-005 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-009 | Tayca Corporation | MSP-009 is a cationic silica dioxide with an average primary particle size of 80 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-012 | Tayca Corporation | MSP-012 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MT-01 | Tayca Corporation | MT-01 is a micro titanium dioxide (10nm) that contains aluminum and stearic acid and can be used in pigments, paints and inks to provide water repellency, transparency and dispersibility. | |
| MT-05 | Tayca Corporation | MT-05 is a micro titanium dioxide (10nm) that contains aluminum and silicon and can be used in pigments, paints and inks to provide water repellency, transparency and low activity. | |
| MT-100AQ | Tayca Corporation | MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints,...展开 MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100HD | Tayca Corporation | MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100S | Tayca Corporation | MT-100S is a micro titanium dioxide (15nm) that contains aluminum and lauric acid and can be used in pigments, paints and inks to provide water repellency, lipophilic characteristics and affinity with resin. |
