| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展开 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetyl Tributyl Citrate (ATBC) | ChemCeed | Acetyl Tributyl Citrate (ATBC) is a used as a biodegradable plasticizer for PVC and cellulose derivates, and it is approved for food contact materials and can even been used as a food additive. ATBC is also used as an emollient for personal care/cosmetics...展开 Acetyl Tributyl Citrate (ATBC) is a used as a biodegradable plasticizer for PVC and cellulose derivates, and it is approved for food contact materials and can even been used as a food additive. ATBC is also used as an emollient for personal care/cosmetics products such as aerosol hair sprays and nail polishes. In addition, ATBC can be used for pharmaceutical coatings (USP grade available), lubricants, and inks. 收起 | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展开 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| Benzotriazole | ChemCeed | Benzotriazole is a corrosion inhibitor for copper and copper alloys, and is commonly used in water cooling systems. Additional benzotriazole applications include use as a silver polishing agent in dishwasher detergent, automotive antifreeze, antirust for ...展开 Benzotriazole is a corrosion inhibitor for copper and copper alloys, and is commonly used in water cooling systems. Additional benzotriazole applications include use as a silver polishing agent in dishwasher detergent, automotive antifreeze, antirust for photography, and use as a lubricant additive. 收起 | |
| Benzyl Alcohol USP | ChemCeed | Benzyl Alcohol is used as a solvent for paints, inks, coatings. In personal care products, Benzyl Alcohol serves as a precursor in the production of esters used for soaps, perfurme, and flavor. For medical use, Benzyl Alcohol is used as a preservative due...展开 Benzyl Alcohol is used as a solvent for paints, inks, coatings. In personal care products, Benzyl Alcohol serves as a precursor in the production of esters used for soaps, perfurme, and flavor. For medical use, Benzyl Alcohol is used as a preservative due to its bacteriostatic and antipruritic properties. 收起 | |
| Benzyl Benzoate, USP | ChemCeed | Benzyl Benzoate is a high solvating benzoate ester plasticizer that can be used in applications such as adhesives, caulks, and sealants. In inks and coatings, Benzyl Benzoate can soften binders to improve flexibility. | |
| Butyl Benzyl Phthalate (BBP) | ChemCeed | Butyl Benzyl Phthalate (BBP) is a is high solvating, fast fusing plasticizer with high efficiency which can be used with a variety of resins. BBP is used for many PVC calendaring and extrusion operations and is an industry standard for vinyl flooring. BBP...展开 Butyl Benzyl Phthalate (BBP) is a is high solvating, fast fusing plasticizer with high efficiency which can be used with a variety of resins. BBP is used for many PVC calendaring and extrusion operations and is an industry standard for vinyl flooring. BBP also finds use in many coatings, inks, adhesives, and caulks. 收起 | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展开 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起 | |
| Decabromodiphenyl Oxide | ChemCeed | 十溴二苯醚用作阻燃剂，在弹性体、电线&电缆，织物涂料，电器&电子设备，汽车零部件和建筑材料中使用。 | |
| Denatonium Benzoate, 20% in EG | ChemCeed | Denatonium Benzoate is a bittering agent which is used to give a bitter taste to toxic products in order to make the product more difficult to ingest. Examples of products which contain denatonium benzoate are antifreeze, detergents, floor cleaner, paint ...展开 Denatonium Benzoate is a bittering agent which is used to give a bitter taste to toxic products in order to make the product more difficult to ingest. Examples of products which contain denatonium benzoate are antifreeze, detergents, floor cleaner, paint stripper and toilet cleaner. 收起 | |
| Dibutyl Maleate (DBM) | ChemCeed | Dibutyl Maleate (DBM) is a plasticizer for vinyl resins, and is used for copolymers applications involving PVC and vinyl acetates. Dibutyl Maleate is an unsaturated ester which is used for creating sulfosuccinate surfactants in detergents and paints. Othe...展开 Dibutyl Maleate (DBM) is a plasticizer for vinyl resins, and is used for copolymers applications involving PVC and vinyl acetates. Dibutyl Maleate is an unsaturated ester which is used for creating sulfosuccinate surfactants in detergents and paints. Other applications of DBM include use in plastisols, dispersions, coatings, adhesives, and synthetic lubricants. 收起 | |
| Dibutyl Phthalate (DBP) | ChemCeed | 邻苯二甲酸二丁酯是一种增塑剂，通常应用于PVC和涂料中。ChemCeed以桶装、手提袋装和散装供应。包装需定制的请来电查问 | |
| Dibutyl Sebacate (DBS) | ChemCeed | Dibutyl Sebacate (DBS) is used as a plasticizer suited for low temperature and is compatible with PVC, acrylic, nitrile rubber, and celluloses. Due to its non-toxicity and low temp performance DBS is ideal for vinyl food contact films. In addition, Dibuty...展开 Dibutyl Sebacate (DBS) is used as a plasticizer suited for low temperature and is compatible with PVC, acrylic, nitrile rubber, and celluloses. Due to its non-toxicity and low temp performance DBS is ideal for vinyl food contact films. In addition, Dibutyl Sebacate finds use in coatings, cosmetics, lubricants, and pharmaceuticals. 收起 | |
| Diisodecyl Adipate (DIDA) | ChemCeed | Diisodecyl Adipate (DIDA) is a plasticizer with excellent low-temperature properties. DIDA works well as a part of a plasticizer blend, and is compatible with PVC, Cellulose acetate butyrate, Ethyl cellulose, Nitrocellulose, Polychloroprene,and Polyvinyl ...展开 Diisodecyl Adipate (DIDA) is a plasticizer with excellent low-temperature properties. DIDA works well as a part of a plasticizer blend, and is compatible with PVC, Cellulose acetate butyrate, Ethyl cellulose, Nitrocellulose, Polychloroprene,and Polyvinyl butyral. In inks and coatings, DIDA can soften binders to improve flexibility. DIDA can also be used in used in adhesives, caulk, sealants, and paint to improve properties. 收起 | |
| Diisodecyl Phthalate (DIDP) | ChemCeed | Diisodecyl Phthalate (DIDP) is a general use high molecular weight Plasticizer. As a PVC plasticizer, DIDP is used in formualtions of screen printing inks. Additionally, DIDP can be used in applications such latex coatings, printing inks, textile coat...展开 Diisodecyl Phthalate (DIDP) is a general use high molecular weight Plasticizer. As a PVC plasticizer, DIDP is used in formualtions of screen printing inks. Additionally, DIDP can be used in applications such latex coatings, printing inks, textile coatings, paper coatings, and leather coatings, inks, adhesives, and sealants. 收起 | |
| Diisononyl Phthalate (DINP) | ChemCeed | Diisononyl Phthalate (DINP) is a general use high molecular weight Plasticizer. As a PVC plasticizer, DINP is used in formualtions of screen printing inks. Additionally, DINP can be used in applications such as anti-corrosion paints, anti-fouling pain...展开 Diisononyl Phthalate (DINP) is a general use high molecular weight Plasticizer. As a PVC plasticizer, DINP is used in formualtions of screen printing inks. Additionally, DINP can be used in applications such as anti-corrosion paints, anti-fouling paints, lacquers, inks, adhesives, and sealants. 收起 | |
| Dimethyl Sebacate (DMS) | ChemCeed | Dimethyl Sebacate (DMS) is a plasticizer for both nitrocellulose, rubber, vinyl resins. Dimethyl sebacate is used in the production of light stabilizers which are used in coatings to protect surfaces and pigments against photo degradation by deactivation ...展开 Dimethyl Sebacate (DMS) is a plasticizer for both nitrocellulose, rubber, vinyl resins. Dimethyl sebacate is used in the production of light stabilizers which are used in coatings to protect surfaces and pigments against photo degradation by deactivation of free radicals. Dimethyl sebacate can also be used as a solvent for resins and rubbers. In inks and coatings, DMS can soften binders to improve flexibility. 收起 | |
| Dioctyl Adipate (DOA) | ChemCeed | Dioctyl adipate (DOA) is a PVC plasticizer that is also commonly used with primary plasticizers, like DOP, to create lubricant basetocks. Dioctyl adipate is also used in paints as a way to disperse pigments. For applications involving food, dioctyl adipat...展开 Dioctyl adipate (DOA) is a PVC plasticizer that is also commonly used with primary plasticizers, like DOP, to create lubricant basetocks. Dioctyl adipate is also used in paints as a way to disperse pigments. For applications involving food, dioctyl adipate can be used as a plasticizer in food contact polymers and rubbers. 收起 | |
| Dioctyl Phthalate (DOP) | ChemCeed | Dioctyl Phthalate (DOP) is a general use Plasticizer. As a PVC plasticizer, DOP is used in formualtions of screen printing inks. Known for its good stability to heat and ultraviolet light, DOP can be used in applications such as paints, lacquers, inks, ad...展开 Dioctyl Phthalate (DOP) is a general use Plasticizer. As a PVC plasticizer, DOP is used in formualtions of screen printing inks. Known for its good stability to heat and ultraviolet light, DOP can be used in applications such as paints, lacquers, inks, adhesives, and sealants. 收起 | |
| Dioctyl Sebacate (DOS) | ChemCeed | Dioctyl Sebacate (DOS) is a phthalate-free plasticizer used for PVC, nitrocelluloses, styrene resins, and synthetic rubbers where low temperature performance is required. It is soluble in hydrocarbons, alcohols, ester, chlorocarbons, ether, benzene and o...展开 Dioctyl Sebacate (DOS) is a phthalate-free plasticizer used for PVC, nitrocelluloses, styrene resins, and synthetic rubbers where low temperature performance is required. It is soluble in hydrocarbons, alcohols, ester, chlorocarbons, ether, benzene and other organic solvents. DOS is recommended for use in adhesives and sealants. 收起 | |
| Dioctyl Terephthalate (DOTP) | ChemCeed | Dioctyl Terephthalate (DOTP) is a general purpose plasticizer, and can be used as a phthalate replacement. As a PVC plasticizer, DOTP is used in formualtions of screen printing inks. Additionally, DOTP can be used in applications such as paints, lacque...展开 Dioctyl Terephthalate (DOTP) is a general purpose plasticizer, and can be used as a phthalate replacement. As a PVC plasticizer, DOTP is used in formualtions of screen printing inks. Additionally, DOTP can be used in applications such as paints, lacquers, inks, adhesives, and sealants. 收起 | |
| Disodium Sebacate (DSS) | ChemCeed | Disodium Sebacate is a castor oil derivative which can be used in cosmetics, detergents, and as a corrosion inhibitor lubricants. | |
| Epoxidized Soybean Oil (ESO) | ChemCeed | 环氧化大豆油，是一种增塑剂，通常用于PVC和涂料应用。ChemCeed以桶装、手提袋装和散装供应。包装需定制的请来电查问 | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展开 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| Industrial Grade Zinc Oxide | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Industrial Grade Zinc Oxide is a white, small grain zinc oxide used in production of products like Zinc stearate, zinc bromide, zinc borate, phosphatizing liquid, as well as used in preparation of electroplate liquid. | |
| JMT-150ANO | Tayca Corporation | JMT-150ANO is a cationic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150AO | Tayca Corporation | JMT-150AO is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150FI | Tayca Corporation | JMT-150FI is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150IB | Tayca Corporation | JMT-150IB is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JR-301 | Tayca Corporation | JR-301 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .3µm particle...展开 JR-301 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .3µm particle size and 18 g/100g of oil absorption. 收起 | |
| JR-403 | Tayca Corporation | JR-403 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average ....展开 JR-403 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25µm particle size and 19 g/100g of oil absorption. 收起 | |
| JR-405 | Tayca Corporation | JR-405 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .21µm particl...展开 JR-405 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .21µm particle size and 15 g/100g of oil absorption. 收起 | |
| JR-600A | Tayca Corporation | JR-600A is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm partic...展开 JR-600A is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particle size and 19 g/100g of oil absorption. 收起 | |
| JR-600E | Tayca Corporation | JR-600E is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .27µm partic...展开 JR-600E is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .27µm particle size and 21 g/100g of oil absorption. 收起 | |
| JR-603 | Tayca Corporation | JR-603 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and zirconium with an average...展开 JR-603 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and zirconium with an average .28µm particle size and 21 g/100g of oil absorption. 收起 | |
| JR-605 | Tayca Corporation | JR-605 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particl...展开 JR-605 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particle size and 19 g/100g of oil absorption. 收起 | |
| JR-701 | Tayca Corporation | JR-701 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an av...展开 JR-701 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an average .27µm particle size and 20 g/100g of oil absorption. 收起 | |
| JR-800 | Tayca Corporation | JR-800 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .27...展开 JR-800 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .27µm particle size and 29 g/100g of oil absorption. 收起 | |
| JR-805 | Tayca Corporation | JR-805 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .29...展开 JR-805 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .29µm particle size and 22 g/100g of oil absorption. 收起 | |
| JR-806 | Tayca Corporation | JR-806 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25...展开 JR-806 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25µm particle size and 21 g/100g of oil absorption. 收起 | |
| JRNC | Tayca Corporation | JRNC is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an aver...展开 JRNC is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an average .27µm particle size and 21 g/100g of oil absorption. 收起 | |
| K-White #105 | Tayca Corporation | K-White #105 is a white powder aluminum triphosphate with an average particle size of 1.6 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White #105 is a white powder aluminum triphosphate with an average particle size of 1.6 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #140W | Tayca Corporation | K-White #140W is a white powder aluminum triphosphate with an average particle size of 2.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White #140W is a white powder aluminum triphosphate with an average particle size of 2.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #450H | Tayca Corporation | K-White #450H is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White #450H is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #82 | Tayca Corporation | K-White #82 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #82 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #84 | Tayca Corporation | K-White #84 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #84 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #84S | Tayca Corporation | K-White #84S is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White #84S is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #85 | Tayca Corporation | K-White #85 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #85 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #94 | Tayca Corporation | K-White #94 is a white powder aluminum triphosphate with an average particle size of 6.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #94 is a white powder aluminum triphosphate with an average particle size of 6.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White Ca650 | Tayca Corporation | K-White Ca650 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White Ca650 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White G105 | Tayca Corporation | K-White G105 is a white powder aluminum triphosphate with an average particle size of 2.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White G105 is a white powder aluminum triphosphate with an average particle size of 2.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| L911P Plasticizer | ChemCeed | Linear 911P is a plasticizer used when low-temperature flexibility is required or for specific end-use applications that require unique processing where the performance requirements cannot be met with branched plasticizers. 911P is especially useful in a...展开 Linear 911P is a plasticizer used when low-temperature flexibility is required or for specific end-use applications that require unique processing where the performance requirements cannot be met with branched plasticizers. 911P is especially useful in anti- fogging coatings, automotive sealants, and shoe polish. 收起 | |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展开 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起 | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展开 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起 | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展开 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展开 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起 | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展开 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| MSN-002 | Tayca Corporation | MSN-002 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSN-003 | Tayca Corporation | MSN-003 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSN-007 | Tayca Corporation | MSN-007 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-001 | Tayca Corporation | MSP-001 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-005 | Tayca Corporation | MSP-005 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-009 | Tayca Corporation | MSP-009 is a cationic silica dioxide with an average primary particle size of 80 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-012 | Tayca Corporation | MSP-012 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MT-01 | Tayca Corporation | MT-01 is a micro titanium dioxide (10nm) that contains aluminum and stearic acid and can be used in pigments, paints and inks to provide water repellency, transparency and dispersibility. | |
| MT-05 | Tayca Corporation | MT-05 is a micro titanium dioxide (10nm) that contains aluminum and silicon and can be used in pigments, paints and inks to provide water repellency, transparency and low activity. | |
| MT-100AQ | Tayca Corporation | MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints,...展开 MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100HD | Tayca Corporation | MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100S | Tayca Corporation | MT-100S is a micro titanium dioxide (15nm) that contains aluminum and lauric acid and can be used in pigments, paints and inks to provide water repellency, lipophilic characteristics and affinity with resin. | |
| MT-100SA | Tayca Corporation | MT-100SA is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electr...展开 MT-100SA is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100WP | Tayca Corporation | MT-100WP is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon. It exhibits good water affinity, compatibility with water-soluble thickening agents and dispersibility in applications such...展开 MT-100WP is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon. It exhibits good water affinity, compatibility with water-soluble thickening agents and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100Z | Tayca Corporation | MT-100Z is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and stearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks an...展开 MT-100Z is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and stearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-10EX | Tayca Corporation | MT-10EX is a micro titanium dioxide (10nm) that contains aluminum and isostearic acid and can be used in pigments, paints and inks to provide transparency, dispersibility and low viscosity when dispersed in oil phase. | |
| MT-150A | Tayca Corporation | MT-150A is an unprocessed titanium dioxide with an average primary particle size of 15 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
| MT-150EX | Tayca Corporation | MT-150EX is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and isostearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, ink...展开 MT-150EX is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and isostearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-150W | Tayca Corporation | MT-150W is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with sodium metaphosphate. It exhibits good transparency and dispersibility in applications such as paints, inks and electrophotography. | |
| MT-300HD | Tayca Corporation | MT-300HD is a micro-fine titanium dioxide with an average primary particle size of 25 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-300HD is a micro-fine titanium dioxide with an average primary particle size of 25 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-500B | Tayca Corporation | MT-500B is an unprocessed titanium dioxide with an average primary particle size of 35 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
| MT-500HD | Tayca Corporation | MT-500HD is a micro-fine titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-500HD is a micro-fine titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-500SA | Tayca Corporation | MT-500SA is a titanium dioxide with an average primary particle size of 35 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in pa...展开 MT-500SA is a titanium dioxide with an average primary particle size of 35 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
| MT-500SAS | Tayca Corporation | MT-500SAS is a titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with silicone oil, silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance and water repellency. It is ...展开 MT-500SAS is a titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with silicone oil, silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance and water repellency. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
| MT-600B | Tayca Corporation | MT-600B is an unprocessed titanium dioxide with an average primary particle size of 50 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
| MT-600SA | Tayca Corporation | MT-600SA is a titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in pa...展开 MT-600SA is a titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
| MT-700B | Tayca Corporation | MT-700B is an unprocessed titanium dioxide with an average primary particle size of 80 nm. It is suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency is desired. | |
| MT-700HD | Tayca Corporation | MT-700HD is a micro-fine titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-700HD is a micro-fine titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MTY-02 | Tayca Corporation | MTY-02 is a micro-fine titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good transparency, water repellency and dispersibility in applications such as paints,...展开 MTY-02 is a micro-fine titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MTY-110M3S | Tayca Corporation | MTY-110M3S is a micro-fine, low viscosity titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good water repellency, transparency and dispersibility in applicati...展开 MTY-110M3S is a micro-fine, low viscosity titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good water repellency, transparency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MTY-150ANO | Tayca Corporation | MTY-150ANO is a cationic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MTY-150AO | Tayca Corporation | MTY-150AO is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MTY-150FI | Tayca Corporation | MTY-150FI is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MTY-150IB | Tayca Corporation | MTY-150IB is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MTY-700BS | Tayca Corporation | MTY-700BS is a titanium dioxide with an average primary particle size of 80 nm. It is surface treated with silicone oil, making it suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency ...展开 MTY-700BS is a titanium dioxide with an average primary particle size of 80 nm. It is surface treated with silicone oil, making it suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency and water repellency is desired. 收起 | |
| MZ-300 | Tayca Corporation | MZ-300 is an untreated micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good transparency and UV-A shielding properties in formulations for paints and inks. | |
| MZ-306X | Tayca Corporation | MZ-306X is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good transparency, water repellency, dispersibility and UV-A shielding properties in formulations for paints and inks. | |
| MZ-500 | Tayca Corporation | MZ-500 is an untreated micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency in formulations for paints and inks. | |
| MZ-506X | Tayca Corporation | MZ-506X is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits good water repellency, dispersal and transparency properties in formulations for paints and inks. | |
| MZ-510HPSX | Tayca Corporation | MZ-510HPSX is a silica and silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency and good light resistance in formulations for paints and inks. |
