| EXOCOAT™ 143 | Axcentive Sarl | EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS ...展开 EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS as well as to old coating layers. It covalently bonds with the substrate resulting in a very durable finish. It can be used as a standalone resin or might be formulated with other raw materials like white and colored pigments, organic resins, fillers, and additives. The use of water-based raw materials should be avoided. Durability is a unique feature of EXOCOAT® 143. It can sustain mechanical abrasion, and chemical attack and is UV stable. When applied at a very low layer thickness of 0.5 to 2µm it provides the surface with a protective hard coating that shows durable easy-to-clean, dirt resistance, anti-graffiti, and strong water repellency properties. It is suitable for ambient or force-cured, high-performance industrial coatings such as protective, coil, marine, and automotive. EXOCOAT® 143-based paints may be brushed, rolled, or sprayed by HVLP or airless spray. 收起 | |
| EXOCOAT™ 151A | Axcentive Sarl | EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...展开 EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151A. It can be used as a general air purifier. Though most effective in outdoor light conditions, it is adapted for use under visible light as found in the interior. In all cases, it should be used as a topcoat to ensure its full effect. Glass and walls coated with EXOCOAT® 151A are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It may be used on other flat surfaces such as plastics or coated substrates yet only interior. It dries under room temperature conditions. Spray application is recommended to reach thin monolayers which prove to be more effective. It is listed with EINECS. TSCA, AICS, and CEPA. 收起 | |
| EXOCOAT™ 151B | Axcentive Sarl | EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...展开 EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151B. In all cases, it should be used as a topcoat to ensure its full effect. EXOCOAT® 151B coated walls are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It is targeted for porous substrates like concrete, brickwork, and gypsum. It is not meant for glass substrates. It dries under room temperature conditions. Brush, roller, or Spray application is recommended to reach homogeneous coatings. It is listed with EINECS. TSCA, AICS, and CEPA. 收起 | |
| EXOCOAT™ 161 | Axcentive Sarl | EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extre...展开 EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extreme hardness (9H). Offers chemical-, scratch-, oxidation resistance, and temperature resistance over 1000°C for prolonged time. It can function as stand-alone resin at a layer thickness of 0.5 to 2 µm to form a durable finish that can be easy to clean. It bonds to substrates such as steel, aluminum, glass, and old coating layers. It can be used as conversion coating replacing Cr(VI). It may be co-formulated with the most frequently used coating ingredients from the group of pigments, fillers, resins, additives, and (co-)solvents and creates colored, super hard, or matte surfaces. EXOCOAT® 161 is highly advised to be used in aprotic solvents. It has a shelf life of 6 months. 收起 | |
| EXOCOAT™ AC | Axcentive Sarl | EXOCOAT® AC by Axcentive is a hybrid sol-gel resin for anti-corrosive conversion coatings in 60% ethanol. It is covalently bonded to the surface and applied directly to metal (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). ...展开 EXOCOAT® AC by Axcentive is a hybrid sol-gel resin for anti-corrosive conversion coatings in 60% ethanol. It is covalently bonded to the surface and applied directly to metal (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It functions as a replacement for the Cr3+ and Cr6+ based system as used in metal plating and automotive industries. It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It can also be used as micrometer-thin primers under conventional organic coatings. It can be overcoated by epoxy primer or polyurethane topcoat systems. EXOCOAT® AC is suitable for conventional low & high pressure airless and air-mixing spraying, dipping, rolling, and brushing. It has a shelf life of 12 months. 收起 | |
| EXOCOAT™ ACX-W | Axcentive Sarl | EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless ...展开 EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It is used as a replacement for chromium-based primers on aluminum and other metals. It can be used as a conversion primer for a coating system based on an epoxy coating and polyurethane topcoat. It may omit toxic chemicals and functions as a replacement for Cr3+ and Cr6+-based systems used in metal plating and aerospace industries. EXOCOAT® ACX-W is applied with conventional low-pressure and high-pressure airless and air-mix spraying, dipping, rolling and brushing. It has a shelf life of 12 months. 收起 | |
| EXOCOAT™ AM | Axcentive Sarl | EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down v...展开 EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down viruses and bacteria. It eradicates viruses such as influenza, SARS-COV-2, dengue & hepatitis and bacteria such as E. coli, MSRA, streptococcus, listeria, pneumonia, and salmonella. It is activated by light and displays quick drying at room temperature. Spray application is recommended to reach thin monolayers. It exhibits curing at room temperature up to 300°C and super hard particles (1GPa Vickers). It is easy to apply & durable, allowing longer disinfection intervals while preserving hygiene level. It shows non-silver leaching, efficacious even under low light conditions, lower service frequency, and no need for frequent disinfection routine. It is used in the state-of-the-art continuous antimicrobial coating for high-traffic areas. EXOCOAT® AM is suitable for topcoats for any surface inside buildings, stores, hospitals, and vehicles. The shelf life of this product is 9 months. 收起 | |
| EXOCOAT™ Clearview | Axcentive Sarl | EXOCOAT® Clearview by Axcentive is a 1K hybrid sol-gel system in ethanol. It has been designed for water-repellent, easy-to-clean coatings for glass and ceramic substrates. A substrate coated with EXOCOAT® Clearview will turn into a hard, water-repellent ...展开 EXOCOAT® Clearview by Axcentive is a 1K hybrid sol-gel system in ethanol. It has been designed for water-repellent, easy-to-clean coatings for glass and ceramic substrates. A substrate coated with EXOCOAT® Clearview will turn into a hard, water-repellent durable easy-to-clean surface. EXOCOAT® Clearview keeps windscreens clean from raindrops and improves vision drastically, especially in difficult wet road conditions, which can be experienced day and night. Besides, it can be used to make easy-to-clean, water shedding tiles and chrome for example used in kitchens and bathrooms. 收起 | |
| EXOCOAT™ Clearview-2 | Axcentive Sarl | EXOCOAT® Clearview-2 by Axcentive is a 2K hybrid sol-gel in ethanol. It is designed for durable water repellent, easy-to-clean, dirt resistant glass coatings. This solvent-based nanosystem can be applied in coatings for automotive windscreens, or glass ba...展开 EXOCOAT® Clearview-2 by Axcentive is a 2K hybrid sol-gel in ethanol. It is designed for durable water repellent, easy-to-clean, dirt resistant glass coatings. This solvent-based nanosystem can be applied in coatings for automotive windscreens, or glass bathroom doors. It can be applied as such or diluted, in coatings as a monolayer to obtain a very hard and durable hydrophobic surface. EXOCOAT® Clearview-2 keeps windows clean from raindrops and improves vision drastically, especially in difficult wet road conditions, which can be experienced day and night. In bathroom glass, it makes the water run down fast and avoids water spots. 收起 | |
| EXOCOAT™ SH | Axcentive Sarl | EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pave...展开 EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pavement, walls, and stucco to get the so-called Lotus Effect. The sol-gel system deposits superhydrophobic particles on the porous substrate. EXOCOAT® SH will not form a film and as a result, the wall stays breathable. With the contact angle of 145o water droplets bounce back from the surface and will roll down immediately upon touch. Thus, the wall remains dry, and clean and will behave as an efficient barrier against water. 收起 | |
| JMT-150ANO | Tayca Corporation | JMT-150ANO is a cationic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150AO | Tayca Corporation | JMT-150AO is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150FI | Tayca Corporation | JMT-150FI is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150IB | Tayca Corporation | JMT-150IB is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JR-301 | Tayca Corporation | JR-301 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .3µm particle...展开 JR-301 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .3µm particle size and 18 g/100g of oil absorption. 收起 | |
| JR-403 | Tayca Corporation | JR-403 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average ....展开 JR-403 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25µm particle size and 19 g/100g of oil absorption. 收起 | |
| JR-405 | Tayca Corporation | JR-405 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .21µm particl...展开 JR-405 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .21µm particle size and 15 g/100g of oil absorption. 收起 | |
| JR-600A | Tayca Corporation | JR-600A is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm partic...展开 JR-600A is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particle size and 19 g/100g of oil absorption. 收起 | |
| JR-600E | Tayca Corporation | JR-600E is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .27µm partic...展开 JR-600E is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .27µm particle size and 21 g/100g of oil absorption. 收起 | |
| JR-603 | Tayca Corporation | JR-603 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and zirconium with an average...展开 JR-603 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and zirconium with an average .28µm particle size and 21 g/100g of oil absorption. 收起 | |
| JR-605 | Tayca Corporation | JR-605 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particl...展开 JR-605 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particle size and 19 g/100g of oil absorption. 收起 | |
| JR-701 | Tayca Corporation | JR-701 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an av...展开 JR-701 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an average .27µm particle size and 20 g/100g of oil absorption. 收起 | |
| JR-800 | Tayca Corporation | JR-800 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .27...展开 JR-800 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .27µm particle size and 29 g/100g of oil absorption. 收起 | |
| JR-805 | Tayca Corporation | JR-805 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .29...展开 JR-805 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .29µm particle size and 22 g/100g of oil absorption. 收起 | |
| JR-806 | Tayca Corporation | JR-806 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25...展开 JR-806 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25µm particle size and 21 g/100g of oil absorption. 收起 | |
| JRNC | Tayca Corporation | JRNC is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an aver...展开 JRNC is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an average .27µm particle size and 21 g/100g of oil absorption. 收起 | |
| K-White #105 | Tayca Corporation | K-White #105 is a white powder aluminum triphosphate with an average particle size of 1.6 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White #105 is a white powder aluminum triphosphate with an average particle size of 1.6 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #140W | Tayca Corporation | K-White #140W is a white powder aluminum triphosphate with an average particle size of 2.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White #140W is a white powder aluminum triphosphate with an average particle size of 2.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #450H | Tayca Corporation | K-White #450H is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White #450H is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #82 | Tayca Corporation | K-White #82 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #82 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #84 | Tayca Corporation | K-White #84 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #84 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #84S | Tayca Corporation | K-White #84S is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White #84S is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #85 | Tayca Corporation | K-White #85 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #85 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #94 | Tayca Corporation | K-White #94 is a white powder aluminum triphosphate with an average particle size of 6.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #94 is a white powder aluminum triphosphate with an average particle size of 6.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White Ca650 | Tayca Corporation | K-White Ca650 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White Ca650 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White G105 | Tayca Corporation | K-White G105 is a white powder aluminum triphosphate with an average particle size of 2.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White G105 is a white powder aluminum triphosphate with an average particle size of 2.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| MSN-002 | Tayca Corporation | MSN-002 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSN-003 | Tayca Corporation | MSN-003 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSN-007 | Tayca Corporation | MSN-007 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-001 | Tayca Corporation | MSP-001 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-005 | Tayca Corporation | MSP-005 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-009 | Tayca Corporation | MSP-009 is a cationic silica dioxide with an average primary particle size of 80 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-012 | Tayca Corporation | MSP-012 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MT-01 | Tayca Corporation | MT-01 is a micro titanium dioxide (10nm) that contains aluminum and stearic acid and can be used in pigments, paints and inks to provide water repellency, transparency and dispersibility. | |
| MT-05 | Tayca Corporation | MT-05 is a micro titanium dioxide (10nm) that contains aluminum and silicon and can be used in pigments, paints and inks to provide water repellency, transparency and low activity. | |
| MT-100AQ | Tayca Corporation | MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints,...展开 MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100HD | Tayca Corporation | MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100S | Tayca Corporation | MT-100S is a micro titanium dioxide (15nm) that contains aluminum and lauric acid and can be used in pigments, paints and inks to provide water repellency, lipophilic characteristics and affinity with resin. | |
| MT-100SA | Tayca Corporation | MT-100SA is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electr...展开 MT-100SA is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100WP | Tayca Corporation | MT-100WP is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon. It exhibits good water affinity, compatibility with water-soluble thickening agents and dispersibility in applications such...展开 MT-100WP is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon. It exhibits good water affinity, compatibility with water-soluble thickening agents and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100Z | Tayca Corporation | MT-100Z is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and stearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks an...展开 MT-100Z is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and stearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-10EX | Tayca Corporation | MT-10EX is a micro titanium dioxide (10nm) that contains aluminum and isostearic acid and can be used in pigments, paints and inks to provide transparency, dispersibility and low viscosity when dispersed in oil phase. | |
| MT-150A | Tayca Corporation | MT-150A is an unprocessed titanium dioxide with an average primary particle size of 15 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
| MT-150EX | Tayca Corporation | MT-150EX is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and isostearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, ink...展开 MT-150EX is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and isostearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-150W | Tayca Corporation | MT-150W is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with sodium metaphosphate. It exhibits good transparency and dispersibility in applications such as paints, inks and electrophotography. | |
| MT-300HD | Tayca Corporation | MT-300HD is a micro-fine titanium dioxide with an average primary particle size of 25 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-300HD is a micro-fine titanium dioxide with an average primary particle size of 25 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-500B | Tayca Corporation | MT-500B is an unprocessed titanium dioxide with an average primary particle size of 35 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
| MT-500HD | Tayca Corporation | MT-500HD is a micro-fine titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-500HD is a micro-fine titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-500SA | Tayca Corporation | MT-500SA is a titanium dioxide with an average primary particle size of 35 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in pa...展开 MT-500SA is a titanium dioxide with an average primary particle size of 35 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
| MT-500SAS | Tayca Corporation | MT-500SAS is a titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with silicone oil, silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance and water repellency. It is ...展开 MT-500SAS is a titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with silicone oil, silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance and water repellency. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
| MT-600B | Tayca Corporation | MT-600B is an unprocessed titanium dioxide with an average primary particle size of 50 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
| MT-600SA | Tayca Corporation | MT-600SA is a titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in pa...展开 MT-600SA is a titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
| MT-700B | Tayca Corporation | MT-700B is an unprocessed titanium dioxide with an average primary particle size of 80 nm. It is suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency is desired. | |
| MT-700HD | Tayca Corporation | MT-700HD is a micro-fine titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-700HD is a micro-fine titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MTY-02 | Tayca Corporation | MTY-02 is a micro-fine titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good transparency, water repellency and dispersibility in applications such as paints,...展开 MTY-02 is a micro-fine titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MTY-110M3S | Tayca Corporation | MTY-110M3S is a micro-fine, low viscosity titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good water repellency, transparency and dispersibility in applicati...展开 MTY-110M3S is a micro-fine, low viscosity titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good water repellency, transparency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MTY-150ANO | Tayca Corporation | MTY-150ANO is a cationic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MTY-150AO | Tayca Corporation | MTY-150AO is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MTY-150FI | Tayca Corporation | MTY-150FI is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MTY-150IB | Tayca Corporation | MTY-150IB is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MTY-700BS | Tayca Corporation | MTY-700BS is a titanium dioxide with an average primary particle size of 80 nm. It is surface treated with silicone oil, making it suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency ...展开 MTY-700BS is a titanium dioxide with an average primary particle size of 80 nm. It is surface treated with silicone oil, making it suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency and water repellency is desired. 收起 | |
| MZ-300 | Tayca Corporation | MZ-300 is an untreated micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good transparency and UV-A shielding properties in formulations for paints and inks. | |
| MZ-306X | Tayca Corporation | MZ-306X is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good transparency, water repellency, dispersibility and UV-A shielding properties in formulations for paints and inks. | |
| MZ-500 | Tayca Corporation | MZ-500 is an untreated micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency in formulations for paints and inks. | |
| MZ-506X | Tayca Corporation | MZ-506X is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits good water repellency, dispersal and transparency properties in formulations for paints and inks. | |
| MZ-510HPSX | Tayca Corporation | MZ-510HPSX is a silica and silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency and good light resistance in formulations for paints and inks. | |
| MZY-303S | Tayca Corporation | MZY-303S is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good water repellency, transparency and UV-A shielding properties in formulations for paints and inks. | |
| MZY-505S | Tayca Corporation | MZY-505S is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits good water repellency and transparency properties in formulations for paints and inks. | |
| MZY-510M3S | Tayca Corporation | MZY-510M3S is a low viscosity, silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency in formulations for paints and inks. | |
| Ruikang R-938 | Xichang Ruikang Titanium Industry Co., Ltd. | Ruikang R-938 is a special rutile titanium dioxide pigment that is manufactured by organic surface treatments and ultrafine grinding. This product has excellent chalk resistance, excellent gloss retention, high tinting strength and gloss, and manufacturin...展开 Ruikang R-938 is a special rutile titanium dioxide pigment that is manufactured by organic surface treatments and ultrafine grinding. This product has excellent chalk resistance, excellent gloss retention, high tinting strength and gloss, and manufacturing consistency. It is recommended to be used in automobile paints for high quality results. 收起 | |
| Ruikang R-998 | Xichang Ruikang Titanium Industry Co., Ltd. | Ruikang R-998 is a universal rutile titanium dioxide pigment. This product has excellent chalk resistance, excellent gloss retention, high tinting strength and gloss, and manufacturing consistency. It is used in a variety of applications including coating...展开 Ruikang R-998 is a universal rutile titanium dioxide pigment. This product has excellent chalk resistance, excellent gloss retention, high tinting strength and gloss, and manufacturing consistency. It is used in a variety of applications including coatings and inks. 收起 | |
| Titanix JA-1 | Tayca Corporation | Titanix JA-1 is a photocatalytic, pigment grade anatase titanium dioxide. It is comprised of 99% TiO2 with a neutral pH balance. It is suitable for use in paints and coatings. | |
| TKC-303 | Tayca Corporation | TKC-303 is a titania coating of an anatase crystal structure. This product contains a high TiO2 concentration that can harden at room temperature and exhibit high photocatalytic activity plus high film hardness. | |
| TKC-304 | Tayca Corporation | TKC-304 is a titania coating of an anatase crystal structure. This product contains a neutral to high TiO2 concentration that can harden at room temperature and exhibit high photocatalytic activity plus high film hardness. | |
| TKC-305 | Tayca Corporation | TKC-305 is a titania coating of an anatase crystal structure. This product contains titanyl ammonium oxalate that can exhibit very high film hardness by calcination(500°C). | |
| Uniphur Black BRN | UNIVERSAL DYECHEM PVT. LTD. | Uniphur Black BRN is a Sulphur Dyestuff with a Color Index Number of Black 1. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
| Uniphur Blue 2BN | UNIVERSAL DYECHEM PVT. LTD. | Uniphur Blue 2BN is a Sulphur Dyestuff with a Color Index of Blue 7. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
| Uniphur Yellow Brown | UNIVERSAL DYECHEM PVT. LTD. | Uniphur Yellow Brown is a Sulphur Dyestuff with a Color Index Number of Brown 10. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
| Uniphur Yellow GC | UNIVERSAL DYECHEM PVT. LTD. | Uniphur Yellow GC is a Sulphur Dyestuff with a Color Index Number of Yellow 2. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
| Univat Brown BR | UNIVERSAL DYECHEM PVT. LTD. | Univat Brown BR is a vat dyestuff with a Color Index of 1. This product is used for cotton, viscose and linen fibers and as an additive in paints, coatings and inks. | |
| Univat Green FB | UNIVERSAL DYECHEM PVT. LTD. | Univat Green FB is a dyestuff with a Color Index Number of 1 and a Color Index Name of 42040:1. This product is used for cotton, viscose and linen fibers and as an additive in paints, coatings and inks. | |
| Univat Grey 2B | UNIVERSAL DYECHEM PVT. LTD. | Univat Grey 2B is a vat dyestuff with a Color Index of Black 16. This product is used for cotton,viscose and linen fibers and as an additive in paints, coatings and inks. | |
| Univat Indigo Blue | UNIVERSAL DYECHEM PVT. LTD. | Univat Indigo Blue is a Vat Dyestuff with a Color Index Number of Indigo Blue 1. This product is used for cotton, viscose and linen fibers that has several different shades and as an additive in paints, coatings and inks. | |
| Univat Khaki 2G | UNIVERSAL DYECHEM PVT. LTD. | Univat Khaki 2G is a Vat Dyestuff with a Color Index of Green 8. It is used for cotton, viscose and linen fibers that has several different shades and as an additive in paints, coatings and inks. | |
| Univat Olive R | UNIVERSAL DYECHEM PVT. LTD. | Univat Olive R is a Vat Dyestuff with a Color Index Number of Black 27. It is used for cotton, viscose and linen fibers and as an additive in paints, coatings and inks. | |
| Univat Olive T | UNIVERSAL DYECHEM PVT. LTD. | Univat Olive T is a Vat Dyestuff with a Color Index Number of Black 25. It is used in cotton, viscose and linen fibers that has several different shades and as an additive in paints, coatings and inks. | |
| Univat Red 6B | UNIVERSAL DYECHEM PVT. LTD. | Univat Red 6B is a Vat Dyestuff with a Color Index Number of Red 13. It is a product used for cotton, viscose and linen fibers that has several different shades as well as an additive in paints, coatings and inks. | |
| Univat Violet 2R | UNIVERSAL DYECHEM PVT. LTD. | Univat Violet 2R is a Vat Dyestuff with a Color Index Number of Violet 1. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
| Univat Yellow GC | UNIVERSAL DYECHEM PVT. LTD. | Univat Yellow GC is a Vat Dyestuff with a Color Index Number of Yellow 2. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. |
