| Depol NW OC-128 | Naewoi Korea Resins | Depol NW-3000 is a polymer type defoamer for solvent based systems. Depol NW-3000 shows defoaming and deaerating for products that range from air drying systems to high temperature baking systems. | |
| Depol NW-111W | Naewoi Korea Resins | Depol NW-111W is a mineral type defoamer for water based systems. This product is a defoaming additive that prevents bubble and foam during the manufacturing of coatings. Depol NW-111W is used in water based acrylic emulsion systems, water soluble adhesiv...展开 Depol NW-111W is a mineral type defoamer for water based systems. This product is a defoaming additive that prevents bubble and foam during the manufacturing of coatings. Depol NW-111W is used in water based acrylic emulsion systems, water soluble adhesives, and water soluble coatings. 收起 | |
| Depol NW-112W | Naewoi Korea Resins | Depol NW-112W is a silicone type defoamer for water based systems. Its main component is a paraffin based mineral oil, containing silicone. It displays initial defoaming properties and shows no remaining bubble formation during defoaming. Depol NW-112W is...展开 Depol NW-112W is a silicone type defoamer for water based systems. Its main component is a paraffin based mineral oil, containing silicone. It displays initial defoaming properties and shows no remaining bubble formation during defoaming. Depol NW-112W is used in styrene modified acrylic emulsion systems, water based and water soluble enamel backing systems, and acrylic emulsion and water dispersing polyurethane systems. 收起 | |
| Depol NW-119W | Naewoi Korea Resins | Depol NW-119W is a silicone type defoamer for water based systems. Its main component is a polysiloxane and special polymer. It prevents foam during the manufacturing of coatings and shows no discoloration of tinting paints. Depol NW-119W is used in styre...展开 Depol NW-119W is a silicone type defoamer for water based systems. Its main component is a polysiloxane and special polymer. It prevents foam during the manufacturing of coatings and shows no discoloration of tinting paints. Depol NW-119W is used in styrene modified acrylic emulsion systems, acrylic emulsion and water dispersing polyurethane systems, and natural and synthetic latex coatings. 收起 | |
| Depol NW-120W | Naewoi Korea Resins | Depol NW-120W is a polymer type defoamer for water based systems. This product provides defoaming or deaerating to products that it is added to. Depol NW-120W is used in water-based clear coating systems, 2-component polyurethane, high viscosity emulsion ...展开 Depol NW-120W is a polymer type defoamer for water based systems. This product provides defoaming or deaerating to products that it is added to. Depol NW-120W is used in water-based clear coating systems, 2-component polyurethane, high viscosity emulsion and water-based UV coating systems. 收起 | |
| Depol NW-121W | Naewoi Korea Resins | Depol NW-121W is a silicone type defoamer for water based systems. Its main component is a special polymer with a polysiloxane copolymer. It is for acrylic emulsion and superior deaerating performance. Depol NW-121W is used in water based acrylic emulsion...展开 Depol NW-121W is a silicone type defoamer for water based systems. Its main component is a special polymer with a polysiloxane copolymer. It is for acrylic emulsion and superior deaerating performance. Depol NW-121W is used in water based acrylic emulsion systems, aqueous plastic coatings, aqueous furniture coatings, and aqueous automotive coatings. 收起 | |
| Depol NW-123W | Naewoi Korea Resins | Depol NW-123W is a silicone type defoamer for water based systems. Its main component is a special polymer with polysiloxane. It is stable in a wide range of pH and has no cratering problem during defoaming. Depol NW-123W is used in styrene modified acryl...展开 Depol NW-123W is a silicone type defoamer for water based systems. Its main component is a special polymer with polysiloxane. It is stable in a wide range of pH and has no cratering problem during defoaming. Depol NW-123W is used in styrene modified acrylic emulsion systems, and exterior wall paints. 收起 | |
| Depol NW-124W | Naewoi Korea Resins | Depol NW-124W is a silicone type defoamer for water based systems. Its main component is a special polymer with a polysiloxane copolymer. It does not cause a gloss reduction or discoloration during defoaming or deaerating. Depol NW-124W is used in water b...展开 Depol NW-124W is a silicone type defoamer for water based systems. Its main component is a special polymer with a polysiloxane copolymer. It does not cause a gloss reduction or discoloration during defoaming or deaerating. Depol NW-124W is used in water based acrylic emulsion systems, aqueous industrial coatings, aqueous pigment concentrates, and aqueous architecture coatings. 收起 | |
| Depol NW-126F | Naewoi Korea Resins | Depol NW-126F is a polymer type defoamer for solvent based systems. Its main component is a vinyl ether with acrylic ester copolymer. This product is used for defoaming during the initial stage and low temperatures for solvent-free based, high-build type ...展开 Depol NW-126F is a polymer type defoamer for solvent based systems. Its main component is a vinyl ether with acrylic ester copolymer. This product is used for defoaming during the initial stage and low temperatures for solvent-free based, high-build type of coatings, and it improves gloss and levelling. This product is used in 2-component solvent and solvent free based epoxy coatings, 2-component solvent and solvent free based urethane coatings, and general industrial high temperature baking systems. 收起 | |
| Depol NW-127W | Naewoi Korea Resins | Depol NW-127W is a polymer type defoamer for water based systems. The main component is a special organic compound. This product is a mineral oil free and silicone free defoamer and also shows no remaining bubble formation during defoaming. Depol NW-127W ...展开 Depol NW-127W is a polymer type defoamer for water based systems. The main component is a special organic compound. This product is a mineral oil free and silicone free defoamer and also shows no remaining bubble formation during defoaming. Depol NW-127W is used in aqueous baking industrial coatings, acrylic emulsion and water dispersing polyurethane systems, aqueous automotive coating systems, and aqueous architecture coating systems. 收起 | |
| Depol NW-128 | Naewoi Korea Resins | Depol NW-128 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ether with an ester copolymer. This product is used for defoaming during the initial stage and low temperatures for solvent-free based, high-build type of...展开 Depol NW-128 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ether with an ester copolymer. This product is used for defoaming during the initial stage and low temperatures for solvent-free based, high-build type of coatings, and it improves gloss and levelling. Depol NW-128 is used in alkyd, acrylic and polyester melamine high temperature baking systems, acrylic urethane, epoxy and polyurethane coatings, and coil coatings. 收起 | |
| Depol NW-128W | Naewoi Korea Resins | Depol NW-128W is a silicone type defoamer for water based systems. Its main component is a special polymer with a polysiloxane. It prevents foam during the manufacturing of coatings and has an initial defoaming property. Depol NW-128W is used in acrylic e...展开 Depol NW-128W is a silicone type defoamer for water based systems. Its main component is a special polymer with a polysiloxane. It prevents foam during the manufacturing of coatings and has an initial defoaming property. Depol NW-128W is used in acrylic emulsions, water dispersing polyurethane systems, water based and water soluble enamel baking systems, and automotive coatings. 收起 | |
| Depol NW-130 | Naewoi Korea Resins | Depol NW-130 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ether with a modified acrylic copolymer. This product deaerates during high temperature baking and does not cause a gloss reduction. Depol NW-130 is used ...展开 Depol NW-130 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ether with a modified acrylic copolymer. This product deaerates during high temperature baking and does not cause a gloss reduction. Depol NW-130 is used in alkyd and polyester baking systems, 1,2-component acrylic and acrylic baking systems, chlorinated rubber and epoxy coatings, and linear polyester coatings. 收起 | |
| Depol NW-133 | Naewoi Korea Resins | Depol NW-133 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ether with a modified acrylic copolymer. This product helps deaerate during high temperature baking and has no influence on inter-adhesive properties as a...展开 Depol NW-133 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ether with a modified acrylic copolymer. This product helps deaerate during high temperature baking and has no influence on inter-adhesive properties as a polymer type. Depol NW-133 is used in alkyd, acrylic and polyester melamine high temperature baking systems, acrylic urethane coatings, solvent and solvent free based epoxy coatings, and acid catalyst and coil coating systems. 收起 | |
| Depol NW-133W | Naewoi Korea Resins | Depol NW-133W is a mineral type defoamer for water based systems. This product is a defoaming additive that prevents bubble and foam during the manufacturing of coatings. Depol NW-133W is used in highly filled emulsion paints, water based acrylic emulsion...展开 Depol NW-133W is a mineral type defoamer for water based systems. This product is a defoaming additive that prevents bubble and foam during the manufacturing of coatings. Depol NW-133W is used in highly filled emulsion paints, water based acrylic emulsion systems, and exterior wall paints. 收起 | |
| Depol NW-137 | Naewoi Korea Resins | Depol NW-137 is a polymer type defoamer for solvent based systems. Its main component is a vinyl ether with a modified acrylic copolymer. This product improves levelling and anti-flooding and also has no influence on inter-adhesive properties in polymers....展开 Depol NW-137 is a polymer type defoamer for solvent based systems. Its main component is a vinyl ether with a modified acrylic copolymer. This product improves levelling and anti-flooding and also has no influence on inter-adhesive properties in polymers. Depol NW-137 is used in alkyd, acrylic and polyester high temperature baking systems, acrylic lacquer and acrylic urethane coatings, chlorinated rubber and epoxy coatings, and acid catalyst and coil coating systems. 收起 | |
| Depol NW-138 | Naewoi Korea Resins | Depol NW-138 is a polymer type defoamer for solvent based systems. Its main component is a modified olefin polymer. This product does not cause a gloss reduction or cratering problem during defoaming or dearating. Depol NW-138 is used in coil coatings, al...展开 Depol NW-138 is a polymer type defoamer for solvent based systems. Its main component is a modified olefin polymer. This product does not cause a gloss reduction or cratering problem during defoaming or dearating. Depol NW-138 is used in coil coatings, alkyd baking systems, polyester melamine high temperature baking systems, and acrylic baking systems. 收起 | |
| Depol NW-140S | Naewoi Korea Resins | Depol NW-140S is a defoaming and de-aerating additive for organic solvent systems. Its main component is a special polymer with polysiloxane copolymer. It provides superior defoaming and deaerating properties is also a solvent free type and improves gloss...展开 Depol NW-140S is a defoaming and de-aerating additive for organic solvent systems. Its main component is a special polymer with polysiloxane copolymer. It provides superior defoaming and deaerating properties is also a solvent free type and improves gloss, slip and levelling. Depol NW-140S is used in 2-component solvent and solvent free based epoxy coatings, 2-component solvent and solvent free based urethane coatings, and general industrial high temperature baking systems. 收起 | |
| Depol NW-147W | Naewoi Korea Resins | Depol NW-147W is a mineral type defoamer for water based systems. Its main component is a paraffinic mineral oil in combination with emulsifiers and silicone. This product is a defoaming additive that prevents bubble and foam during the manufacturing of ...展开 Depol NW-147W is a mineral type defoamer for water based systems. Its main component is a paraffinic mineral oil in combination with emulsifiers and silicone. This product is a defoaming additive that prevents bubble and foam during the manufacturing of coatings. Depol NW-147W is used in styrene modified acrylic emulsion systems, acrylic emulsions, water dispersing polyurethane systems, and the production of emulsion binders. 收起 | |
| Depol NW-151 | Naewoi Korea Resins | Depol NW-151 is a defoaming and de-aerating additive for organic solvent systems. Its main component is a special polymer with polysiloxane copolymer. It displays defoaming and deaerating properties. Depol NW-151 is used in wood coatings based on short oi...展开 Depol NW-151 is a defoaming and de-aerating additive for organic solvent systems. Its main component is a special polymer with polysiloxane copolymer. It displays defoaming and deaerating properties. Depol NW-151 is used in wood coatings based on short oil alkyd wood coatings based on polyurethane, fast drying enamel coatings based on acrylic lacquer, vinyl resin, polyester-melamine high temperature baking systems, and flooring and can coatings based on epoxy. 收起 | |
| Depol NW-156 | Naewoi Korea Resins | Depol NW-156 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ester copolymer. This product performs well in regards to deaerating during the spraying, rolling, and brushing of coatings. Depol NW-156 is used in alkyd...展开 Depol NW-156 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ester copolymer. This product performs well in regards to deaerating during the spraying, rolling, and brushing of coatings. Depol NW-156 is used in alkyd and lacquer fast air drying enamel systems, 2-component urethane and epoxy coatings, and PVC plastisol coatings. 收起 | |
| Depol NW-161 | Naewoi Korea Resins | Depol NW-161 is a defoaming and de-aerating additive for organic solvent systems. Its main component is a special polymer with polysiloxane copolymer. It displays superior compatibility and defoaming for organic solvent systems. Depol NW-161 is used in vi...展开 Depol NW-161 is a defoaming and de-aerating additive for organic solvent systems. Its main component is a special polymer with polysiloxane copolymer. It displays superior compatibility and defoaming for organic solvent systems. Depol NW-161 is used in vinyl, polyurethane, and epoxy ester coatings, NC lacquer, flooring and wood coatings, and polyester, general industrial systems. 收起 | |
| Depol NW-1640 | Naewoi Korea Resins | Depol NW-1640 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ester copolymer. This product has no influence on inter-adhesiveness in polymers and defoams well under low temperatures. Depol NW-1640 is used in solven...展开 Depol NW-1640 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ester copolymer. This product has no influence on inter-adhesiveness in polymers and defoams well under low temperatures. Depol NW-1640 is used in solvent and solvent-free epoxy coating systems, solvent and solvent-free urethane coating systems, and industrial baking systems. 收起 | |
| Depol NW-165 | Naewoi Korea Resins | Depol NW-165 is a defoaming and de-aerating additive for organic solvent systems. Its main component is a modified polysiloxane copolymer. It displays no gloss reduction of surface film. Depol NW-165 is used in wood coatings based on short oil alkyd, acry...展开 Depol NW-165 is a defoaming and de-aerating additive for organic solvent systems. Its main component is a modified polysiloxane copolymer. It displays no gloss reduction of surface film. Depol NW-165 is used in wood coatings based on short oil alkyd, acrylic lacquer, acrylic urethane coatings, chlorinated rubber, modified vinyl coatings, and medium and long oil enamel coatings. 收起 | |
| Depol NW-166H | Naewoi Korea Resins | Depol NW-166H is a defoaming and de-aerating additive. Its main component is a special high molecular compound. It displays deaerating properties during spraying, rolling and brushing coatings. Depol NW-166H is used in alkyd, melamine and NC lacquer coati...展开 Depol NW-166H is a defoaming and de-aerating additive. Its main component is a special high molecular compound. It displays deaerating properties during spraying, rolling and brushing coatings. Depol NW-166H is used in alkyd, melamine and NC lacquer coatings, 2-component urethane coatings, chlorinated rubber, epoxy coatings, and acrylic and alkyd air drying systems. 收起 | |
| Depol NW-172 | Naewoi Korea Resins | Depol NW-172 is a polymer type defoamer for solvent based systems. Its main component is a vinyl ether with a modified acryl copolymer. This product is effective for destroying micro-foam and shows acceptance and compatibility with coating resins. Depol N...展开 Depol NW-172 is a polymer type defoamer for solvent based systems. Its main component is a vinyl ether with a modified acryl copolymer. This product is effective for destroying micro-foam and shows acceptance and compatibility with coating resins. Depol NW-172 is used in unsaturated polyester and UV systems, PVC compounds, and 2-component epoxy coatings. 收起 | |
| Depol NW-192 | Naewoi Korea Resins | Depol NW-192 is a polymer type defoamer for solvent based systems. Its main component is a special high molecular compound. This product does not show haze in films it is added to, regardless of the amount added. Depol NW-192 is used in alkyd and lacquer ...展开 Depol NW-192 is a polymer type defoamer for solvent based systems. Its main component is a special high molecular compound. This product does not show haze in films it is added to, regardless of the amount added. Depol NW-192 is used in alkyd and lacquer fast air drying enamel systems, polyurethane and epoxy coatings, and chlorinated rubber and polyester high temperature baking systems. 收起 | |
| Depol NW-193 | Naewoi Korea Resins | Depol NW-193 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ether modified copolymer. This product does not show haze in films it is added to, regardless of the amount added. Depol NW-193 is used in alkyd and lacqu...展开 Depol NW-193 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ether modified copolymer. This product does not show haze in films it is added to, regardless of the amount added. Depol NW-193 is used in alkyd and lacquer fast air drying enamel systems, polyurethane and epoxy coatings, and chlorinated rubber and polyester high temperature baking systems. 收起 | |
| Depol NW-195 | Naewoi Korea Resins | Depol NW-195 is a polymer type defoamer for solvent based systems. Its main component is a high molecular vinyl ether with an ester copolymer. This product shows no gloss reduction during defoaming and also shows no separation between the coating and the ...展开 Depol NW-195 is a polymer type defoamer for solvent based systems. Its main component is a high molecular vinyl ether with an ester copolymer. This product shows no gloss reduction during defoaming and also shows no separation between the coating and the additive during long storage. Depol NW-195 is used in 2-component solvent and solvent free based urethane coatings, 2-component solvent and solvent-free based epoxy coatings, polyester acrylic baking systems, and polyester urethane UV curing coatings. 收起 | |
| Depol NW-2000 | Naewoi Korea Resins | Depol NW-2000 is a polymer type defoamer for solvent based systems. Its main component is a high molecular vinyl ether with ester copolymer. This product shows no separation between coatings and additives during long storage and also shows no gloss reduct...展开 Depol NW-2000 is a polymer type defoamer for solvent based systems. Its main component is a high molecular vinyl ether with ester copolymer. This product shows no separation between coatings and additives during long storage and also shows no gloss reduction during defoaming. Depol NW-2000 is used in alkyd and lacquer fast air drying enamel systems, polyurethane and epoxy coatings, and chlorinated rubber and polyester high temperature baking systems. 收起 | |
| Depol NW-289W | Naewoi Korea Resins | Depol NW-289W is a silicone type defoamer for water based systems. Its main component is a special polymer with a modified polysiloxane. It prevents foam during the manufacturing of coatings and has no influence on gloss or long-time color stability. Depo...展开 Depol NW-289W is a silicone type defoamer for water based systems. Its main component is a special polymer with a modified polysiloxane. It prevents foam during the manufacturing of coatings and has no influence on gloss or long-time color stability. Depol NW-289W is used in acrylic emulsions, water dispersing polyurethane systems, styrene modified acrylic emulsion systems, and water soluble adhesives. 收起 | |
| Depol NW-293W | Naewoi Korea Resins | Depol NW-293W is a silicone type defoamer for water based systems. Its main component is a special polymer with a polysiloxane copolymer. It is used as with high concentration tints and prevents foam during dispersion and the manufacturing of coatings. De...展开 Depol NW-293W is a silicone type defoamer for water based systems. Its main component is a special polymer with a polysiloxane copolymer. It is used as with high concentration tints and prevents foam during dispersion and the manufacturing of coatings. Depol NW-293W is used in water based acrylic emulsion systems, aqueous industrial coatings, aqueous pigment concentrates, and aqueous architectural coatings. 收起 | |
| Depol NW-294W | Naewoi Korea Resins | Depol NW-294W is a mineral type defoamer for water based systems. Its main component is a special organic compound. This product is a defoaming additive that prevents bubble and foam during the manufacturing of coatings. Depol NW-294W is used in water bas...展开 Depol NW-294W is a mineral type defoamer for water based systems. Its main component is a special organic compound. This product is a defoaming additive that prevents bubble and foam during the manufacturing of coatings. Depol NW-294W is used in water based acrylic emulsion systems, emulsion manufacturing, and building protection : coatings based on styrene-acrylic emulsions. 收起 | |
| Depol NW-295W | Naewoi Korea Resins | Depol NW-295W is a mineral type defoamer for water based systems. Its main component is a mineral oil compound with polysiloxane. This product is a defoaming additive that prevents bubbles and foam during the manufacturing of coatings. Depol NW-295W is us...展开 Depol NW-295W is a mineral type defoamer for water based systems. Its main component is a mineral oil compound with polysiloxane. This product is a defoaming additive that prevents bubbles and foam during the manufacturing of coatings. Depol NW-295W is used in gloss and semi-gloss emulsion systems, water based acrylic emulsion systems, and exterior wall paints. 收起 | |
| Depol NW-3000 | Naewoi Korea Resins | Depol NW-3000 is a polymer type defoamer for solvent based systems. Its main component is a special organic compound. This product shows initial defoaming properties. Depol NW-3000 is used in PVC plastisol systems. | |
| Depol NW-830S | Naewoi Korea Resins | Depol NW-830S is a mineral type defoamer for water based systems. Its main component is an aliphatic hydrocarbon. This product is a defoaming additive that prevents bubbles and foam during the manufacturing of coatings. Depol NW-830S is used in general in...展开 Depol NW-830S is a mineral type defoamer for water based systems. Its main component is an aliphatic hydrocarbon. This product is a defoaming additive that prevents bubbles and foam during the manufacturing of coatings. Depol NW-830S is used in general industrial coating systems, automotive coating systems, and wood coating systems. 收起 | |
| HIFIFAST ORANGE HF2Y (Pigment Orange 64) | Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 | HIFIFAST ORANGE HF2Y（颜料橙64）是明亮的黄色调有机橙色颜料。它是行业标准的高性能橙色。出色的色强度，热稳定性和耐光性使其适用于包括食品接触和玩具等几乎所有的聚合物和应用。 | |
| HIFIFAST ORANGE HF3R (Pigment Orange 36) | Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 | HIFIFAST ORANGE HF3R (Pigment Orange 36) 是一种橙色颜料，在所有涂料系统中有良好全面的色牢性。它推荐用于OEM涂料，修补漆，水基汽车漆，装饰漆和多种类型的工业漆。 | |
| HIFIFAST RED HF2Y (Pigment Red 166) | Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 | HIFIFAST RED HF2Y (Pigment Red 166)是一款黄色调红色颜料，在低浓度下也有良好的热稳定性。它具有出色的使用性能。 | |
| HIFIFAST RED HF4Y-C (Pigment Red 242) | Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 | HIFIFAST RED HF4Y-C （Pigment Red 242）是一种有出色的色牢度的强烈猩红色颜料。它适合用于多种聚合物中的纤维，薄膜，注塑成膜和挤出加工应用。 | |
| HIFIFAST RED HF5B-W (Pigment Red 176) | Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 | HIFIFAST RED HF5B-W（Pigment Red 176）是一种高透明度的蓝色调红色颜料，有良好的色牢度。它有出色的介电性质。这款产品适合用于电缆剪切及纺丝染色应用中。 | |
| HIFIFAST RED HFBY-L (Pigment Red 144) | Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 | HIFIFAST RED HFBY-L (Pigment Red 144) 是一种多功能蓝色调红色颜料，有出色的色牢度和分散性。它推荐用于聚丙烯纤维，PVC汽车制造和电缆应用中。 | |
| HIFIFAST YELLOW HF3G (Pigment Yellow 154) | Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 | HIFIFAST YELLOW HF3G（Pigment Yellow 154）是一种中等黄色调颜料，有出色的耐光性和耐候性。由于具有出色的耐受性，它十分适用于各种浓度范围，包括浓度低至非常淡的色彩，并很适合作为着色颜料。它具有很好的流动性，也可以在不影响光泽度的前提下用于高浓度颜料。 | |
| HIFIFAST YELLOW HF4G-LB (Pigment Yellow 151) | Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 | HIFIFAST YELLOW HF4G-LB（Pigment Yellow 151）是一种绿色调黄色颜料，有出色的耐光性和耐候性，特别是深色调。它具有有机颜料中相对良好的不透明性。由于它在油漆中具有很好的流动性，它可以在高颜料浓度下使用，且不影响光泽度。应当注意的是对强碱的耐性并不令人满意。 | |
| HIFIFAST YELLOW HF4R-C (Pigment Yellow 139) | Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 | HIFIFAST YELLOW HF4R-C （Pigment Yellow 139）是一种红色调黄色颜料，有出色的耐光性和耐候性，特别是在深色调中。作为有机颜料，它有出色的不透明性。它特别适用于为低铅油漆生产深色不透明无铅黄色。 | |
| HIFIFAST YELLOW HF5M-FB (Pigment Yellow 180) | Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 | HIFIFAST YELLOW HF5M-FB (Pigment Yellow 180)是一种绿色调黄色颜料，有出色的色牢度。这款颜料已经成为高性能绿色调黄色的行业标准。它在多种聚合物中进行使用，还包括食品和玩具应用等 | |
| JMT-150ANO | Tayca Corporation | JMT-150ANO is a cationic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150AO | Tayca Corporation | JMT-150AO is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150FI | Tayca Corporation | JMT-150FI is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150IB | Tayca Corporation | JMT-150IB is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JR-301 | Tayca Corporation | JR-301 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .3µm particle...展开 JR-301 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .3µm particle size and 18 g/100g of oil absorption. 收起 | |
| JR-403 | Tayca Corporation | JR-403 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average ....展开 JR-403 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25µm particle size and 19 g/100g of oil absorption. 收起 | |
| JR-405 | Tayca Corporation | JR-405 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .21µm particl...展开 JR-405 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .21µm particle size and 15 g/100g of oil absorption. 收起 | |
| JR-600A | Tayca Corporation | JR-600A is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm partic...展开 JR-600A is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particle size and 19 g/100g of oil absorption. 收起 | |
| JR-600E | Tayca Corporation | JR-600E is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .27µm partic...展开 JR-600E is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .27µm particle size and 21 g/100g of oil absorption. 收起 | |
| JR-603 | Tayca Corporation | JR-603 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and zirconium with an average...展开 JR-603 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and zirconium with an average .28µm particle size and 21 g/100g of oil absorption. 收起 | |
| JR-605 | Tayca Corporation | JR-605 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particl...展开 JR-605 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particle size and 19 g/100g of oil absorption. 收起 | |
| JR-701 | Tayca Corporation | JR-701 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an av...展开 JR-701 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an average .27µm particle size and 20 g/100g of oil absorption. 收起 | |
| JR-800 | Tayca Corporation | JR-800 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .27...展开 JR-800 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .27µm particle size and 29 g/100g of oil absorption. 收起 | |
| JR-805 | Tayca Corporation | JR-805 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .29...展开 JR-805 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .29µm particle size and 22 g/100g of oil absorption. 收起 | |
| JR-806 | Tayca Corporation | JR-806 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25...展开 JR-806 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25µm particle size and 21 g/100g of oil absorption. 收起 | |
| JRNC | Tayca Corporation | JRNC is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an aver...展开 JRNC is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an average .27µm particle size and 21 g/100g of oil absorption. 收起 | |
| K-White #105 | Tayca Corporation | K-White #105 is a white powder aluminum triphosphate with an average particle size of 1.6 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White #105 is a white powder aluminum triphosphate with an average particle size of 1.6 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #140W | Tayca Corporation | K-White #140W is a white powder aluminum triphosphate with an average particle size of 2.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White #140W is a white powder aluminum triphosphate with an average particle size of 2.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #450H | Tayca Corporation | K-White #450H is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White #450H is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #82 | Tayca Corporation | K-White #82 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #82 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #84 | Tayca Corporation | K-White #84 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #84 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #84S | Tayca Corporation | K-White #84S is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White #84S is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #85 | Tayca Corporation | K-White #85 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #85 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #94 | Tayca Corporation | K-White #94 is a white powder aluminum triphosphate with an average particle size of 6.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #94 is a white powder aluminum triphosphate with an average particle size of 6.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White Ca650 | Tayca Corporation | K-White Ca650 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White Ca650 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White G105 | Tayca Corporation | K-White G105 is a white powder aluminum triphosphate with an average particle size of 2.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White G105 is a white powder aluminum triphosphate with an average particle size of 2.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| MSN-002 | Tayca Corporation | MSN-002 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSN-003 | Tayca Corporation | MSN-003 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSN-007 | Tayca Corporation | MSN-007 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-001 | Tayca Corporation | MSP-001 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-005 | Tayca Corporation | MSP-005 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-009 | Tayca Corporation | MSP-009 is a cationic silica dioxide with an average primary particle size of 80 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-012 | Tayca Corporation | MSP-012 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MT-01 | Tayca Corporation | MT-01 is a micro titanium dioxide (10nm) that contains aluminum and stearic acid and can be used in pigments, paints and inks to provide water repellency, transparency and dispersibility. | |
| MT-05 | Tayca Corporation | MT-05 is a micro titanium dioxide (10nm) that contains aluminum and silicon and can be used in pigments, paints and inks to provide water repellency, transparency and low activity. | |
| MT-100AQ | Tayca Corporation | MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints,...展开 MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100HD | Tayca Corporation | MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100S | Tayca Corporation | MT-100S is a micro titanium dioxide (15nm) that contains aluminum and lauric acid and can be used in pigments, paints and inks to provide water repellency, lipophilic characteristics and affinity with resin. | |
| MT-100SA | Tayca Corporation | MT-100SA is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electr...展开 MT-100SA is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100WP | Tayca Corporation | MT-100WP is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon. It exhibits good water affinity, compatibility with water-soluble thickening agents and dispersibility in applications such...展开 MT-100WP is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon. It exhibits good water affinity, compatibility with water-soluble thickening agents and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100Z | Tayca Corporation | MT-100Z is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and stearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks an...展开 MT-100Z is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and stearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-10EX | Tayca Corporation | MT-10EX is a micro titanium dioxide (10nm) that contains aluminum and isostearic acid and can be used in pigments, paints and inks to provide transparency, dispersibility and low viscosity when dispersed in oil phase. | |
| MT-150A | Tayca Corporation | MT-150A is an unprocessed titanium dioxide with an average primary particle size of 15 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
| MT-150EX | Tayca Corporation | MT-150EX is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and isostearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, ink...展开 MT-150EX is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and isostearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-150W | Tayca Corporation | MT-150W is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with sodium metaphosphate. It exhibits good transparency and dispersibility in applications such as paints, inks and electrophotography. | |
| MT-300HD | Tayca Corporation | MT-300HD is a micro-fine titanium dioxide with an average primary particle size of 25 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-300HD is a micro-fine titanium dioxide with an average primary particle size of 25 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-500B | Tayca Corporation | MT-500B is an unprocessed titanium dioxide with an average primary particle size of 35 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
| MT-500HD | Tayca Corporation | MT-500HD is a micro-fine titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-500HD is a micro-fine titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-500SA | Tayca Corporation | MT-500SA is a titanium dioxide with an average primary particle size of 35 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in pa...展开 MT-500SA is a titanium dioxide with an average primary particle size of 35 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
| MT-500SAS | Tayca Corporation | MT-500SAS is a titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with silicone oil, silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance and water repellency. It is ...展开 MT-500SAS is a titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with silicone oil, silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance and water repellency. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
| MT-600B | Tayca Corporation | MT-600B is an unprocessed titanium dioxide with an average primary particle size of 50 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
| MT-600SA | Tayca Corporation | MT-600SA is a titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in pa...展开 MT-600SA is a titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
| MT-700B | Tayca Corporation | MT-700B is an unprocessed titanium dioxide with an average primary particle size of 80 nm. It is suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency is desired. | |
| MT-700HD | Tayca Corporation | MT-700HD is a micro-fine titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-700HD is a micro-fine titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 |
