UL Prospector

成功!

成功保存搜索结果
CARDIS™ 36 Baker Hughes (Baker Petrolite - Coatings) CARDIS™ 36 is an oxidized wax with low molecular weight used in imaging and coatings applications. CARDIS™ 36 has a melting point of 91 and a viscosity of 30 at 99°C. This product is used to emulsify into water-based systems, act as a co-emulsifier for hy...展开 CARDIS™ 36 is an oxidized wax with low molecular weight used in imaging and coatings applications. CARDIS™ 36 has a melting point of 91 and a viscosity of 30 at 99°C. This product is used to emulsify into water-based systems, act as a co-emulsifier for hydrocarbon waxes, provide reactive sites and improve solubility in polar solvents and resins. 收起
CERAMER™ 1251 Baker Hughes (Baker Petrolite - Coatings) CERAMER™ 1251 polymer is formed by grafting maleic anhydride derivatives onto hydrocarbon polymers in a manner that adds high levels of acid and ester functionality without significantly degrading the hydrocarbon backbone. CERAMER™ 1251 polymer has a melt...展开 CERAMER™ 1251 polymer is formed by grafting maleic anhydride derivatives onto hydrocarbon polymers in a manner that adds high levels of acid and ester functionality without significantly degrading the hydrocarbon backbone. CERAMER™ 1251 polymer has a melting point of 79 and a saponification number of 156. Despite a higher acid number than oxidized products, they are much harder with higher melting points. It is used in imaging and coatings applications to promote adhesion and bonding in thermal transfer inks, as a dispersant for pigments in thermal transfer inks and coatings, as a compatibilizer for polyolefin waxes into polyester and styrene-acrylic toners, and to promote low coefficient of friction in polishes. 收起
CERAMER™ 1608 Baker Hughes (Baker Petrolite - Coatings) CERAMER™ 1608 polymer is formed by grafting maleic anhydride derivatives onto hydrocarbon polymers in a manner that adds high levels of acid and ester functionality without significantly degrading the hydrocarbon backbone. CERAMER™ 1608 polymer has a melt...展开 CERAMER™ 1608 polymer is formed by grafting maleic anhydride derivatives onto hydrocarbon polymers in a manner that adds high levels of acid and ester functionality without significantly degrading the hydrocarbon backbone. CERAMER™ 1608 polymer has a melting point of 75 and a saponification number of 215. Despite a higher acid number than oxidized products, they are much harder with higher melting points. It is used in imaging and coatings applications to promote adhesion and bonding in thermal transfer inks, as a dispersant for pigments in thermal transfer inks and coatings, as a compatibilizer for polyolefin waxes into polyester and styrene-acrylic toners, and to promote low coefficient of friction in polishes. 收起
CERAMER™ 67 Baker Hughes (Baker Petrolite - Coatings) CERAMER™ 67 polymer is formed by grafting maleic anhydride derivatives onto hydrocarbon polymers in a manner that adds high levels of acid and ester functionality without significantly degrading the hydrocarbon backbone. CERAMER™ 67 polymer has a melting ...展开 CERAMER™ 67 polymer is formed by grafting maleic anhydride derivatives onto hydrocarbon polymers in a manner that adds high levels of acid and ester functionality without significantly degrading the hydrocarbon backbone. CERAMER™ 67 polymer has a melting point of 96 and a saponification number of 77. Despite a higher acid number than oxidized products, they are much harder with higher melting points. It is used in imaging and coatings applications to promote adhesion and bonding in thermal transfer inks, as a dispersant for pigments in thermal transfer inks and coatings, as a compatibilizer for polyolefin waxes into polyester and styrene-acrylic toners, and to promote low coefficient of friction in polishes. 收起
DIAX™ 2770 Baker Hughes (Baker Petrolite - Coatings) DIAX™ 2770 is a hyperbranched hydrocarbon polymer that is a liquid at room temperature used in imaging and coatings applications. When used in solvent based coating and ink formulations, DIAX 2770 polymer promotes surface quality by reducing defects assoc...展开 DIAX™ 2770 is a hyperbranched hydrocarbon polymer that is a liquid at room temperature used in imaging and coatings applications. When used in solvent based coating and ink formulations, DIAX 2770 polymer promotes surface quality by reducing defects associated with foaming. Product is intended for use in polyester, PVDC, and epoxy based systems. The purpose of the product is to reduce surface defects of coatings and inks while being soluble in common coating and ink solvents and being easily incorporated in coating and inks systems. 收起
JMT-150ANO Tayca Corporation JMT-150ANO is a cationic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography.
JMT-150AO Tayca Corporation JMT-150AO is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography.
JMT-150FI Tayca Corporation JMT-150FI is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography.
JMT-150IB Tayca Corporation JMT-150IB is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography.
JR-301 Tayca Corporation JR-301 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .3µm particle...展开 JR-301 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .3µm particle size and 18 g/100g of oil absorption. 收起
JR-403 Tayca Corporation JR-403 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average ....展开 JR-403 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25µm particle size and 19 g/100g of oil absorption. 收起
JR-405 Tayca Corporation JR-405 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .21µm particl...展开 JR-405 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .21µm particle size and 15 g/100g of oil absorption. 收起
JR-600A Tayca Corporation JR-600A is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm partic...展开 JR-600A is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particle size and 19 g/100g of oil absorption. 收起
JR-600E Tayca Corporation JR-600E is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .27µm partic...展开 JR-600E is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .27µm particle size and 21 g/100g of oil absorption. 收起
JR-603 Tayca Corporation JR-603 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and zirconium with an average...展开 JR-603 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and zirconium with an average .28µm particle size and 21 g/100g of oil absorption. 收起
JR-605 Tayca Corporation JR-605 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particl...展开 JR-605 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particle size and 19 g/100g of oil absorption. 收起
JR-701 Tayca Corporation JR-701 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an av...展开 JR-701 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an average .27µm particle size and 20 g/100g of oil absorption. 收起
JR-800 Tayca Corporation JR-800 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .27...展开 JR-800 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .27µm particle size and 29 g/100g of oil absorption. 收起
JR-805 Tayca Corporation JR-805 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .29...展开 JR-805 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .29µm particle size and 22 g/100g of oil absorption. 收起
JR-806 Tayca Corporation JR-806 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25...展开 JR-806 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25µm particle size and 21 g/100g of oil absorption. 收起
JRNC Tayca Corporation JRNC is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an aver...展开 JRNC is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an average .27µm particle size and 21 g/100g of oil absorption. 收起
K-White #105 Tayca Corporation K-White #105 is a white powder aluminum triphosphate with an average particle size of 1.6 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White #105 is a white powder aluminum triphosphate with an average particle size of 1.6 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起
K-White #140W Tayca Corporation K-White #140W is a white powder aluminum triphosphate with an average particle size of 2.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White #140W is a white powder aluminum triphosphate with an average particle size of 2.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起
K-White #450H Tayca Corporation K-White #450H is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White #450H is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起
K-White #82 Tayca Corporation K-White #82 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #82 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起
K-White #84 Tayca Corporation K-White #84 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #84 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起
K-White #84S Tayca Corporation K-White #84S is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White #84S is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起
K-White #85 Tayca Corporation K-White #85 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #85 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起
K-White #94 Tayca Corporation K-White #94 is a white powder aluminum triphosphate with an average particle size of 6.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #94 is a white powder aluminum triphosphate with an average particle size of 6.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起
K-White Ca650 Tayca Corporation K-White Ca650 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White Ca650 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起
K-White G105 Tayca Corporation K-White G105 is a white powder aluminum triphosphate with an average particle size of 2.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White G105 is a white powder aluminum triphosphate with an average particle size of 2.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起
MSN-002 Tayca Corporation MSN-002 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography.
MSN-003 Tayca Corporation MSN-003 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography.
MSN-007 Tayca Corporation MSN-007 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography.
MSP-001 Tayca Corporation MSP-001 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography.
MSP-005 Tayca Corporation MSP-005 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography.
MSP-009 Tayca Corporation MSP-009 is a cationic silica dioxide with an average primary particle size of 80 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography.
MSP-012 Tayca Corporation MSP-012 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography.
MT-01 Tayca Corporation MT-01 is a micro titanium dioxide (10nm) that contains aluminum and stearic acid and can be used in pigments, paints and inks to provide water repellency, transparency and dispersibility.
MT-05 Tayca Corporation MT-05 is a micro titanium dioxide (10nm) that contains aluminum and silicon and can be used in pigments, paints and inks to provide water repellency, transparency and low activity.
MT-100AQ Tayca Corporation MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints,...展开 MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints, inks and electrophotography. 收起
MT-100HD Tayca Corporation MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起
MT-100S Tayca Corporation MT-100S is a micro titanium dioxide (15nm) that contains aluminum and lauric acid and can be used in pigments, paints and inks to provide water repellency, lipophilic characteristics and affinity with resin.
MT-100SA Tayca Corporation MT-100SA is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electr...展开 MT-100SA is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起
MT-100WP Tayca Corporation MT-100WP is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon. It exhibits good water affinity, compatibility with water-soluble thickening agents and dispersibility in applications such...展开 MT-100WP is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon. It exhibits good water affinity, compatibility with water-soluble thickening agents and dispersibility in applications such as paints, inks and electrophotography. 收起
MT-100Z Tayca Corporation MT-100Z is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and stearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks an...展开 MT-100Z is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and stearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起
MT-10EX Tayca Corporation MT-10EX is a micro titanium dioxide (10nm) that contains aluminum and isostearic acid and can be used in pigments, paints and inks to provide transparency, dispersibility and low viscosity when dispersed in oil phase.
MT-150A Tayca Corporation MT-150A is an unprocessed titanium dioxide with an average primary particle size of 15 nm. It is suitable for use as a colorant in paints, inks and electrophotography.
MT-150EX Tayca Corporation MT-150EX is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and isostearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, ink...展开 MT-150EX is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and isostearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起
MT-150W Tayca Corporation MT-150W is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with sodium metaphosphate. It exhibits good transparency and dispersibility in applications such as paints, inks and electrophotography.
MT-300HD Tayca Corporation MT-300HD is a micro-fine titanium dioxide with an average primary particle size of 25 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-300HD is a micro-fine titanium dioxide with an average primary particle size of 25 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起
MT-500B Tayca Corporation MT-500B is an unprocessed titanium dioxide with an average primary particle size of 35 nm. It is suitable for use as a colorant in paints, inks and electrophotography.
MT-500HD Tayca Corporation MT-500HD is a micro-fine titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-500HD is a micro-fine titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起
MT-500SA Tayca Corporation MT-500SA is a titanium dioxide with an average primary particle size of 35 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in pa...展开 MT-500SA is a titanium dioxide with an average primary particle size of 35 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in paints, inks and electrophotography. 收起
MT-500SAS Tayca Corporation MT-500SAS is a titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with silicone oil, silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance and water repellency. It is ...展开 MT-500SAS is a titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with silicone oil, silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance and water repellency. It is suitable for use as a colorant in paints, inks and electrophotography. 收起
MT-600B Tayca Corporation MT-600B is an unprocessed titanium dioxide with an average primary particle size of 50 nm. It is suitable for use as a colorant in paints, inks and electrophotography.
MT-600SA Tayca Corporation MT-600SA is a titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in pa...展开 MT-600SA is a titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in paints, inks and electrophotography. 收起
MT-700B Tayca Corporation MT-700B is an unprocessed titanium dioxide with an average primary particle size of 80 nm. It is suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency is desired.
MT-700HD Tayca Corporation MT-700HD is a micro-fine titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-700HD is a micro-fine titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起
MTY-02 Tayca Corporation MTY-02 is a micro-fine titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good transparency, water repellency and dispersibility in applications such as paints,...展开 MTY-02 is a micro-fine titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起
MTY-110M3S Tayca Corporation MTY-110M3S is a micro-fine, low viscosity titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good water repellency, transparency and dispersibility in applicati...展开 MTY-110M3S is a micro-fine, low viscosity titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good water repellency, transparency and dispersibility in applications such as paints, inks and electrophotography. 收起
MTY-150ANO Tayca Corporation MTY-150ANO is a cationic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography.
MTY-150AO Tayca Corporation MTY-150AO is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography.
MTY-150FI Tayca Corporation MTY-150FI is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography.
MTY-150IB Tayca Corporation MTY-150IB is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography.
MTY-700BS Tayca Corporation MTY-700BS is a titanium dioxide with an average primary particle size of 80 nm. It is surface treated with silicone oil, making it suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency ...展开 MTY-700BS is a titanium dioxide with an average primary particle size of 80 nm. It is surface treated with silicone oil, making it suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency and water repellency is desired. 收起
MZ-300 Tayca Corporation MZ-300 is an untreated micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good transparency and UV-A shielding properties in formulations for paints and inks.
MZ-306X Tayca Corporation MZ-306X is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good transparency, water repellency, dispersibility and UV-A shielding properties in formulations for paints and inks.
MZ-500 Tayca Corporation MZ-500 is an untreated micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency in formulations for paints and inks.
MZ-506X Tayca Corporation MZ-506X is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits good water repellency, dispersal and transparency properties in formulations for paints and inks.
MZ-510HPSX Tayca Corporation MZ-510HPSX is a silica and silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency and good light resistance in formulations for paints and inks.
MZY-303S Tayca Corporation MZY-303S is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good water repellency, transparency and UV-A shielding properties in formulations for paints and inks.
MZY-505S Tayca Corporation MZY-505S is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits good water repellency and transparency properties in formulations for paints and inks.
MZY-510M3S Tayca Corporation MZY-510M3S is a low viscosity, silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency in formulations for paints and inks.
PETROLITE C-7500 Baker Hughes (Baker Petrolite - Coatings) PETROLITE™ C-7500 is an oxidized polymer with low molecular weight used in imaging and coatings applications. PETROLITE™ C-7500 has a melting point of 97 and a viscosity of 70 at 116°C. This product is used to emulsify into water-based systems, act as a c...展开 PETROLITE™ C-7500 is an oxidized polymer with low molecular weight used in imaging and coatings applications. PETROLITE™ C-7500 has a melting point of 97 and a viscosity of 70 at 116°C. This product is used to emulsify into water-based systems, act as a co-emulsifier for hydrocarbon waxes, provide reactive sites and improve solubility in polar solvents and resins. 收起
PETROLITE™ C-8500 Baker Hughes (Baker Petrolite - Coatings) PETROLITE™ C-8500 is an oxidized polymer with low molecular weight used in imaging and coatings applications. PETROLITE™ C-8500 has a melting point of 95 and a viscosity of 40 at 116°C. This product is used to emulsify into water-based systems, act as a c...展开 PETROLITE™ C-8500 is an oxidized polymer with low molecular weight used in imaging and coatings applications. PETROLITE™ C-8500 has a melting point of 95 and a viscosity of 40 at 116°C. This product is used to emulsify into water-based systems, act as a co-emulsifier for hydrocarbon waxes, provide reactive sites and improve solubility in polar solvents and resins. 收起
PETROLITE™ C-9500 Baker Hughes (Baker Petrolite - Coatings) PETROLITE™ C-9500 is an oxidized polymer with low molecular weight used in imaging and coatings applications. PETROLITE™ C-9500 has a melting point of 95 and a viscosity of 16 at 116°C. This product is used to emulsify into water-based systems, act as a c...展开 PETROLITE™ C-9500 is an oxidized polymer with low molecular weight used in imaging and coatings applications. PETROLITE™ C-9500 has a melting point of 95 and a viscosity of 16 at 116°C. This product is used to emulsify into water-based systems, act as a co-emulsifier for hydrocarbon waxes, provide reactive sites and improve solubility in polar solvents and resins. 收起
PETROLITE™ D-1038 Baker Hughes (Baker Petrolite - Coatings) PETROLITE™ D-1038 is a dispersant used in imaging and coatings applications to disperse a variety of pigments in water based coating and ink systems. This dispersant is based on an ethoxylated polymer with an HLB of 18. PETROLITE™ D-1038 is VOC free and h...展开 PETROLITE™ D-1038 is a dispersant used in imaging and coatings applications to disperse a variety of pigments in water based coating and ink systems. This dispersant is based on an ethoxylated polymer with an HLB of 18. PETROLITE™ D-1038 is VOC free and has a viscosity of 30. 收起
PETROLITE™ E-2020 Baker Hughes (Baker Petrolite - Coatings) PETROLITE™ E-2020 is an oxidized polymer with low molecular weight used in imaging and coatings applications. PETROLITE™ E-2020 has a melting point of 116 and a viscosity of 75 at 149°C. This product is used to emulsify into water-based systems, act as a ...展开 PETROLITE™ E-2020 is an oxidized polymer with low molecular weight used in imaging and coatings applications. PETROLITE™ E-2020 has a melting point of 116 and a viscosity of 75 at 149°C. This product is used to emulsify into water-based systems, act as a co-emulsifier for hydrocarbon waxes, provide reactive sites and improve solubility in polar solvents and resins. 收起
PETROLITE™ EP-700 Baker Hughes (Baker Petrolite - Coatings) PETROLITE™ EP-700 is a copolymer of propylene and ethylene. The addition of propylene results in short chain branching, which reduces the polymer’s crystallinity. PETROLITE™ EP-700 has a melting point of 96 and a viscosity of 12 at 99°C. This copolymer ha...展开 PETROLITE™ EP-700 is a copolymer of propylene and ethylene. The addition of propylene results in short chain branching, which reduces the polymer’s crystallinity. PETROLITE™ EP-700 has a melting point of 96 and a viscosity of 12 at 99°C. This copolymer has a narrow molecular weight distribution and the branching provides a more flexible and softer polymer with solvent solubility. The targeted end uses of this copolymer is to promote anti-block, release aid, and slip aid in thermoplastic elastomers and for hot melt adhesives applications. 收起
PETRONAUBA™ C Baker Hughes (Baker Petrolite - Coatings) PETRONAUBA™ C is an oxidized polymer with low molecular weight used in imaging and coatings applications. PETRONAUBA™ C has a melting point of 93 and a viscosity of 26 at 99°C. This product is used to emulsify into water-based systems, act as a co-emulsif...展开 PETRONAUBA™ C is an oxidized polymer with low molecular weight used in imaging and coatings applications. PETRONAUBA™ C has a melting point of 93 and a viscosity of 26 at 99°C. This product is used to emulsify into water-based systems, act as a co-emulsifier for hydrocarbon waxes, provide reactive sites and improve solubility in polar solvents and resins. 收起
POLYWAX™ 1000 Baker Hughes (Baker Petrolite - Coatings) POLYWAX™ 1000 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 1000 has a melting point of 113 and a viscosity of 15. It exhibits a sharp melting point, fast recrystalliz...展开 POLYWAX™ 1000 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 1000 has a melting point of 113 and a viscosity of 15. It exhibits a sharp melting point, fast recrystallization, low melt viscosity, heat stability, and resistance to chemical attack. The end uses for this product include anti-block, release aid, scratch and mar, slip aid, and thermal viscosity control. 收起
POLYWAX™ 2000 Baker Hughes (Baker Petrolite - Coatings) POLYWAX™ 2000 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 2000 has a melting point of 126 and a viscosity of 55. It exhibits a sharp melting point, fast recrystalliz...展开 POLYWAX™ 2000 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 2000 has a melting point of 126 and a viscosity of 55. It exhibits a sharp melting point, fast recrystallization, low melt viscosity, heat stability, and resistance to chemical attack. The end uses for this product include anti-block, release aid, scratch and mar, slip aid, and thermal viscosity control. 收起
POLYWAX™ 3000 Baker Hughes (Baker Petrolite - Coatings) POLYWAX™ 3000 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 3000 has a melting point of 129 and a viscosity of 130. It exhibits a sharp melting point, fast recrystalli...展开 POLYWAX™ 3000 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 3000 has a melting point of 129 and a viscosity of 130. It exhibits a sharp melting point, fast recrystallization, low melt viscosity, heat stability, and resistance to chemical attack. The end uses for this product include anti-block, release aid, scratch and mar, slip aid, and thermal viscosity control. 收起
POLYWAX™ 400 Baker Hughes (Baker Petrolite - Coatings) POLYWAX™ 400 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 400 has a melting point of 81 and a viscosity of 7. It exhibits a sharp melting point, fast recrystallizatio...展开 POLYWAX™ 400 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 400 has a melting point of 81 and a viscosity of 7. It exhibits a sharp melting point, fast recrystallization, low melt viscosity, heat stability, and resistance to chemical attack. The end uses for this product include anti-block, release aid, scratch and mar, slip aid, and thermal viscosity control. 收起
POLYWAX™ 500 Baker Hughes (Baker Petrolite - Coatings) POLYWAX™ 500 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 500 has a melting point of 88 and a viscosity of 8.5. It exhibits a sharp melting point, fast recrystallizat...展开 POLYWAX™ 500 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 500 has a melting point of 88 and a viscosity of 8.5. It exhibits a sharp melting point, fast recrystallization, low melt viscosity, heat stability, and resistance to chemical attack. The end uses for this product include anti-block, release aid, scratch and mar, slip aid, and thermal viscosity control. 收起
POLYWAX™ 600 Baker Hughes (Baker Petrolite - Coatings) POLYWAX™ 600 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 600 has a melting point of 94 and a viscosity of 10. It exhibits a sharp melting point, fast recrystallizati...展开 POLYWAX™ 600 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 600 has a melting point of 94 and a viscosity of 10. It exhibits a sharp melting point, fast recrystallization, low melt viscosity, heat stability, and resistance to chemical attack. The end uses for this product include anti-block, release aid, scratch and mar, slip aid, and thermal viscosity control. 收起
POLYWAX™ 655 Baker Hughes (Baker Petrolite - Coatings) POLYWAX™ 655 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 655 has a melting point of 99 and a viscosity of 7. It exhibits a sharp melting point, fast recrystallizatio...展开 POLYWAX™ 655 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 655 has a melting point of 99 and a viscosity of 7. It exhibits a sharp melting point, fast recrystallization, low melt viscosity, heat stability, and resistance to chemical attack. The end uses for this product include anti-block, release aid, scratch and mar, slip aid, and thermal viscosity control. 收起
POLYWAX™ 725 Baker Hughes (Baker Petrolite - Coatings) POLYWAX™ 725 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 725 has a melting point of 104 and a viscosity of 10. It exhibits a sharp melting point, fast recrystallizat...展开 POLYWAX™ 725 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 725 has a melting point of 104 and a viscosity of 10. It exhibits a sharp melting point, fast recrystallization, low melt viscosity, heat stability, and resistance to chemical attack. The end uses for this product include anti-block, release aid, scratch and mar, slip aid, and thermal viscosity control. 收起
POLYWAX™ 850 Baker Hughes (Baker Petrolite - Coatings) POLYWAX™ 850 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 850 has a melting point of 107 and a viscosity of 10. It exhibits a sharp melting point, fast recrystallizat...展开 POLYWAX™ 850 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 850 has a melting point of 107 and a viscosity of 10. It exhibits a sharp melting point, fast recrystallization, low melt viscosity, heat stability, and resistance to chemical attack. The end uses for this product include anti-block, release aid, scratch and mar, slip aid, and thermal viscosity control. 收起
Picassian® AC-049 Stahl Polymers Picassian® AC-049 is a waterbased, anionic acrylic copolymer emulsion agent that is used in exterior wood varnishes. It provides clear, soft, and flexiable films and has good water resistance properties. This has high transparency properties, high gloss p...展开 Picassian® AC-049 is a waterbased, anionic acrylic copolymer emulsion agent that is used in exterior wood varnishes. It provides clear, soft, and flexiable films and has good water resistance properties. This has high transparency properties, high gloss properties, high UV resistance properties, and good outdoor durability. 收起
Picassian® AC-111 Stahl Polymers Picassian® AC-111 is an aqueous emulsion of an anionic acrylic copolymer that is used in leather finishes. It makes films clear, gloss, soft, and tack free. This product is flexible, elastic, has good chemical resistance properties, good scrub resistance ...展开 Picassian® AC-111 is an aqueous emulsion of an anionic acrylic copolymer that is used in leather finishes. It makes films clear, gloss, soft, and tack free. This product is flexible, elastic, has good chemical resistance properties, good scrub resistance properties, and low water absorption properties. 收起
Picassian® AC-122 Stahl Polymers Picassian® AC-122 is a waterbased anionic self crosslinking styrene acrylic copolymer emulsion agent. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good blocking properties, good chemical resistance properties...展开 Picassian® AC-122 is a waterbased anionic self crosslinking styrene acrylic copolymer emulsion agent. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good blocking properties, good chemical resistance properties, good scratch resistance, good clarity properties, good gloss properties, and is quick and easy to sand. 收起
Picassian® AC-126 Stahl Polymers Picassian® AC-126 is a waterbased, anionic, styrene-acrylic copolymer emulsion agent that is used as an anticorrosive primer on concrete flooring, sport floors, roofing porous tiles as well as being used as an universal decorative primers. It provides glo...展开 Picassian® AC-126 is a waterbased, anionic, styrene-acrylic copolymer emulsion agent that is used as an anticorrosive primer on concrete flooring, sport floors, roofing porous tiles as well as being used as an universal decorative primers. It provides glossy, hard, and transparent films once coalesced. This product has good water resistance, humidity resistance, adhesion, corrosion resistance, blister resistance, and mechanical properties. It also has good compatibility with other binders such as acrylics and polyurethanes. 收起
Picassian® AC-169 Stahl Polymers Picassian® AC-169 is a waterbased anionic self crosslinking stryene acrylic copolymer emulsion agent. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good blocking resistance properties, good scratch resistance ...展开 Picassian® AC-169 is a waterbased anionic self crosslinking stryene acrylic copolymer emulsion agent. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good blocking resistance properties, good scratch resistance properties, good clarity properties, and is quick and easy to sand. 收起
Picassian® AC-176 Stahl Polymers Picassian® AC-176 is a waterbased anionic styrene acrylic copolymer that contains free hydroxyl groups. It is used in anticorrosive primers and topcoats, and acid curing lacquers. This product is brittle, has good outdoor resistance, has good UV resistanc...展开 Picassian® AC-176 is a waterbased anionic styrene acrylic copolymer that contains free hydroxyl groups. It is used in anticorrosive primers and topcoats, and acid curing lacquers. This product is brittle, has good outdoor resistance, has good UV resistance, has good adhesion properties on a varity of metallic and plastic substrates, has good mechanical properties, and makes films clear, hard, flexiable, and glossy. 收起
Picassian® AC-177 Stahl Polymers Picassian® AC-177 is a waterbased, anionic, styrene-acrylic copolymer that contains free hydroxyl groups. It is used in acid curing lacquers, anticorrosive primers, high glossy topcoats, and oven cured enamels. This product is brittle, has good adhesion p...展开 Picassian® AC-177 is a waterbased, anionic, styrene-acrylic copolymer that contains free hydroxyl groups. It is used in acid curing lacquers, anticorrosive primers, high glossy topcoats, and oven cured enamels. This product is brittle, has good adhesion properties with plastic and metallic substrates, good outdoor resistance properties, good UV resistance properties, and good mechanical properties. 收起
Picassian® AC-191 Stahl Polymers Picassian® AC-191 is a waterbased anionic styrene acrylic copolymer emulsion agent. It is used in consumer electronics, metallic coatings, and in general plastic applications. This product is brittle, has good adhesion on ABS and PS, has good scratch resi...展开 Picassian® AC-191 is a waterbased anionic styrene acrylic copolymer emulsion agent. It is used in consumer electronics, metallic coatings, and in general plastic applications. This product is brittle, has good adhesion on ABS and PS, has good scratch resistance properties, good alcohol resistance, has good hand cream resistance, is stable with treated aluminium flakes, and provides clear, very hard, and glossy films. 收起
Picassian® AC-192 Stahl Polymers Picassian® AC-192 is a waterbased, anionic, self crosslinking acrylic emulsion that contains free hydroxyl groups. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good chemical resistance properties, has good sc...展开 Picassian® AC-192 is a waterbased, anionic, self crosslinking acrylic emulsion that contains free hydroxyl groups. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good chemical resistance properties, has good scratch resistance properties, has good transparency properties, is easy to sand, is quick to sand, and is crosslinkable with isocyanates. 收起
Picassian® AC-213 Stahl Polymers Picassian® AC-213 is a waterbased anionic pure acrylic copolymer emulsion agent that is used in adhesives, textile coatings, and industrial shoe polish. It has good adhesion properties, good water resistance properties, good humidity resistance properties...展开 Picassian® AC-213 is a waterbased anionic pure acrylic copolymer emulsion agent that is used in adhesives, textile coatings, and industrial shoe polish. It has good adhesion properties, good water resistance properties, good humidity resistance properties, and improves scrub resistance properties. 收起