| JMT-150ANO | Tayca Corporation | JMT-150ANO is a cationic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150AO | Tayca Corporation | JMT-150AO is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150FI | Tayca Corporation | JMT-150FI is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150IB | Tayca Corporation | JMT-150IB is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JR-301 | Tayca Corporation | JR-301 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .3µm particle...展开 JR-301 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .3µm particle size and 18 g/100g of oil absorption. 收起 | |
| JR-403 | Tayca Corporation | JR-403 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average ....展开 JR-403 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25µm particle size and 19 g/100g of oil absorption. 收起 | |
| JR-405 | Tayca Corporation | JR-405 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .21µm particl...展开 JR-405 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .21µm particle size and 15 g/100g of oil absorption. 收起 | |
| JR-600A | Tayca Corporation | JR-600A is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm partic...展开 JR-600A is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particle size and 19 g/100g of oil absorption. 收起 | |
| JR-600E | Tayca Corporation | JR-600E is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .27µm partic...展开 JR-600E is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .27µm particle size and 21 g/100g of oil absorption. 收起 | |
| JR-603 | Tayca Corporation | JR-603 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and zirconium with an average...展开 JR-603 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and zirconium with an average .28µm particle size and 21 g/100g of oil absorption. 收起 | |
| JR-605 | Tayca Corporation | JR-605 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particl...展开 JR-605 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particle size and 19 g/100g of oil absorption. 收起 | |
| JR-701 | Tayca Corporation | JR-701 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an av...展开 JR-701 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an average .27µm particle size and 20 g/100g of oil absorption. 收起 | |
| JR-800 | Tayca Corporation | JR-800 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .27...展开 JR-800 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .27µm particle size and 29 g/100g of oil absorption. 收起 | |
| JR-805 | Tayca Corporation | JR-805 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .29...展开 JR-805 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .29µm particle size and 22 g/100g of oil absorption. 收起 | |
| JR-806 | Tayca Corporation | JR-806 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25...展开 JR-806 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25µm particle size and 21 g/100g of oil absorption. 收起 | |
| JRNC | Tayca Corporation | JRNC is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an aver...展开 JRNC is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an average .27µm particle size and 21 g/100g of oil absorption. 收起 | |
| K-White #105 | Tayca Corporation | K-White #105 is a white powder aluminum triphosphate with an average particle size of 1.6 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White #105 is a white powder aluminum triphosphate with an average particle size of 1.6 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #140W | Tayca Corporation | K-White #140W is a white powder aluminum triphosphate with an average particle size of 2.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White #140W is a white powder aluminum triphosphate with an average particle size of 2.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #450H | Tayca Corporation | K-White #450H is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White #450H is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #82 | Tayca Corporation | K-White #82 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #82 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #84 | Tayca Corporation | K-White #84 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #84 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #84S | Tayca Corporation | K-White #84S is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White #84S is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #85 | Tayca Corporation | K-White #85 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #85 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #94 | Tayca Corporation | K-White #94 is a white powder aluminum triphosphate with an average particle size of 6.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #94 is a white powder aluminum triphosphate with an average particle size of 6.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White Ca650 | Tayca Corporation | K-White Ca650 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White Ca650 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White G105 | Tayca Corporation | K-White G105 is a white powder aluminum triphosphate with an average particle size of 2.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White G105 is a white powder aluminum triphosphate with an average particle size of 2.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| MSN-002 | Tayca Corporation | MSN-002 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSN-003 | Tayca Corporation | MSN-003 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSN-007 | Tayca Corporation | MSN-007 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-001 | Tayca Corporation | MSP-001 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-005 | Tayca Corporation | MSP-005 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-009 | Tayca Corporation | MSP-009 is a cationic silica dioxide with an average primary particle size of 80 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-012 | Tayca Corporation | MSP-012 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MT-01 | Tayca Corporation | MT-01 is a micro titanium dioxide (10nm) that contains aluminum and stearic acid and can be used in pigments, paints and inks to provide water repellency, transparency and dispersibility. | |
| MT-05 | Tayca Corporation | MT-05 is a micro titanium dioxide (10nm) that contains aluminum and silicon and can be used in pigments, paints and inks to provide water repellency, transparency and low activity. | |
| MT-100AQ | Tayca Corporation | MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints,...展开 MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100HD | Tayca Corporation | MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100S | Tayca Corporation | MT-100S is a micro titanium dioxide (15nm) that contains aluminum and lauric acid and can be used in pigments, paints and inks to provide water repellency, lipophilic characteristics and affinity with resin. | |
| MT-100SA | Tayca Corporation | MT-100SA is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electr...展开 MT-100SA is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100WP | Tayca Corporation | MT-100WP is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon. It exhibits good water affinity, compatibility with water-soluble thickening agents and dispersibility in applications such...展开 MT-100WP is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon. It exhibits good water affinity, compatibility with water-soluble thickening agents and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100Z | Tayca Corporation | MT-100Z is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and stearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks an...展开 MT-100Z is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and stearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-10EX | Tayca Corporation | MT-10EX is a micro titanium dioxide (10nm) that contains aluminum and isostearic acid and can be used in pigments, paints and inks to provide transparency, dispersibility and low viscosity when dispersed in oil phase. | |
| MT-150A | Tayca Corporation | MT-150A is an unprocessed titanium dioxide with an average primary particle size of 15 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
| MT-150EX | Tayca Corporation | MT-150EX is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and isostearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, ink...展开 MT-150EX is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and isostearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-150W | Tayca Corporation | MT-150W is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with sodium metaphosphate. It exhibits good transparency and dispersibility in applications such as paints, inks and electrophotography. | |
| MT-300HD | Tayca Corporation | MT-300HD is a micro-fine titanium dioxide with an average primary particle size of 25 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-300HD is a micro-fine titanium dioxide with an average primary particle size of 25 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-500B | Tayca Corporation | MT-500B is an unprocessed titanium dioxide with an average primary particle size of 35 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
| MT-500HD | Tayca Corporation | MT-500HD is a micro-fine titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-500HD is a micro-fine titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-500SA | Tayca Corporation | MT-500SA is a titanium dioxide with an average primary particle size of 35 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in pa...展开 MT-500SA is a titanium dioxide with an average primary particle size of 35 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
| MT-500SAS | Tayca Corporation | MT-500SAS is a titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with silicone oil, silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance and water repellency. It is ...展开 MT-500SAS is a titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with silicone oil, silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance and water repellency. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
| MT-600B | Tayca Corporation | MT-600B is an unprocessed titanium dioxide with an average primary particle size of 50 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
| MT-600SA | Tayca Corporation | MT-600SA is a titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in pa...展开 MT-600SA is a titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
| MT-700B | Tayca Corporation | MT-700B is an unprocessed titanium dioxide with an average primary particle size of 80 nm. It is suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency is desired. | |
| MT-700HD | Tayca Corporation | MT-700HD is a micro-fine titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-700HD is a micro-fine titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MTY-02 | Tayca Corporation | MTY-02 is a micro-fine titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good transparency, water repellency and dispersibility in applications such as paints,...展开 MTY-02 is a micro-fine titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MTY-110M3S | Tayca Corporation | MTY-110M3S is a micro-fine, low viscosity titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good water repellency, transparency and dispersibility in applicati...展开 MTY-110M3S is a micro-fine, low viscosity titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good water repellency, transparency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MTY-150ANO | Tayca Corporation | MTY-150ANO is a cationic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MTY-150AO | Tayca Corporation | MTY-150AO is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MTY-150FI | Tayca Corporation | MTY-150FI is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MTY-150IB | Tayca Corporation | MTY-150IB is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MTY-700BS | Tayca Corporation | MTY-700BS is a titanium dioxide with an average primary particle size of 80 nm. It is surface treated with silicone oil, making it suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency ...展开 MTY-700BS is a titanium dioxide with an average primary particle size of 80 nm. It is surface treated with silicone oil, making it suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency and water repellency is desired. 收起 | |
| MZ-300 | Tayca Corporation | MZ-300 is an untreated micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good transparency and UV-A shielding properties in formulations for paints and inks. | |
| MZ-306X | Tayca Corporation | MZ-306X is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good transparency, water repellency, dispersibility and UV-A shielding properties in formulations for paints and inks. | |
| MZ-500 | Tayca Corporation | MZ-500 is an untreated micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency in formulations for paints and inks. | |
| MZ-506X | Tayca Corporation | MZ-506X is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits good water repellency, dispersal and transparency properties in formulations for paints and inks. | |
| MZ-510HPSX | Tayca Corporation | MZ-510HPSX is a silica and silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency and good light resistance in formulations for paints and inks. | |
| MZY-303S | Tayca Corporation | MZY-303S is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good water repellency, transparency and UV-A shielding properties in formulations for paints and inks. | |
| MZY-505S | Tayca Corporation | MZY-505S is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits good water repellency and transparency properties in formulations for paints and inks. | |
| MZY-510M3S | Tayca Corporation | MZY-510M3S is a low viscosity, silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency in formulations for paints and inks. | |
| Picassian® AC-049 | Stahl Polymers | Picassian® AC-049 is a waterbased, anionic acrylic copolymer emulsion agent that is used in exterior wood varnishes. It provides clear, soft, and flexiable films and has good water resistance properties. This has high transparency properties, high gloss p...展开 Picassian® AC-049 is a waterbased, anionic acrylic copolymer emulsion agent that is used in exterior wood varnishes. It provides clear, soft, and flexiable films and has good water resistance properties. This has high transparency properties, high gloss properties, high UV resistance properties, and good outdoor durability. 收起 | |
| Picassian® AC-111 | Stahl Polymers | Picassian® AC-111 is an aqueous emulsion of an anionic acrylic copolymer that is used in leather finishes. It makes films clear, gloss, soft, and tack free. This product is flexible, elastic, has good chemical resistance properties, good scrub resistance ...展开 Picassian® AC-111 is an aqueous emulsion of an anionic acrylic copolymer that is used in leather finishes. It makes films clear, gloss, soft, and tack free. This product is flexible, elastic, has good chemical resistance properties, good scrub resistance properties, and low water absorption properties. 收起 | |
| Picassian® AC-122 | Stahl Polymers | Picassian® AC-122 is a waterbased anionic self crosslinking styrene acrylic copolymer emulsion agent. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good blocking properties, good chemical resistance properties...展开 Picassian® AC-122 is a waterbased anionic self crosslinking styrene acrylic copolymer emulsion agent. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good blocking properties, good chemical resistance properties, good scratch resistance, good clarity properties, good gloss properties, and is quick and easy to sand. 收起 | |
| Picassian® AC-126 | Stahl Polymers | Picassian® AC-126 is a waterbased, anionic, styrene-acrylic copolymer emulsion agent that is used as an anticorrosive primer on concrete flooring, sport floors, roofing porous tiles as well as being used as an universal decorative primers. It provides glo...展开 Picassian® AC-126 is a waterbased, anionic, styrene-acrylic copolymer emulsion agent that is used as an anticorrosive primer on concrete flooring, sport floors, roofing porous tiles as well as being used as an universal decorative primers. It provides glossy, hard, and transparent films once coalesced. This product has good water resistance, humidity resistance, adhesion, corrosion resistance, blister resistance, and mechanical properties. It also has good compatibility with other binders such as acrylics and polyurethanes. 收起 | |
| Picassian® AC-169 | Stahl Polymers | Picassian® AC-169 is a waterbased anionic self crosslinking stryene acrylic copolymer emulsion agent. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good blocking resistance properties, good scratch resistance ...展开 Picassian® AC-169 is a waterbased anionic self crosslinking stryene acrylic copolymer emulsion agent. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good blocking resistance properties, good scratch resistance properties, good clarity properties, and is quick and easy to sand. 收起 | |
| Picassian® AC-176 | Stahl Polymers | Picassian® AC-176 is a waterbased anionic styrene acrylic copolymer that contains free hydroxyl groups. It is used in anticorrosive primers and topcoats, and acid curing lacquers. This product is brittle, has good outdoor resistance, has good UV resistanc...展开 Picassian® AC-176 is a waterbased anionic styrene acrylic copolymer that contains free hydroxyl groups. It is used in anticorrosive primers and topcoats, and acid curing lacquers. This product is brittle, has good outdoor resistance, has good UV resistance, has good adhesion properties on a varity of metallic and plastic substrates, has good mechanical properties, and makes films clear, hard, flexiable, and glossy. 收起 | |
| Picassian® AC-177 | Stahl Polymers | Picassian® AC-177 is a waterbased, anionic, styrene-acrylic copolymer that contains free hydroxyl groups. It is used in acid curing lacquers, anticorrosive primers, high glossy topcoats, and oven cured enamels. This product is brittle, has good adhesion p...展开 Picassian® AC-177 is a waterbased, anionic, styrene-acrylic copolymer that contains free hydroxyl groups. It is used in acid curing lacquers, anticorrosive primers, high glossy topcoats, and oven cured enamels. This product is brittle, has good adhesion properties with plastic and metallic substrates, good outdoor resistance properties, good UV resistance properties, and good mechanical properties. 收起 | |
| Picassian® AC-191 | Stahl Polymers | Picassian® AC-191 is a waterbased anionic styrene acrylic copolymer emulsion agent. It is used in consumer electronics, metallic coatings, and in general plastic applications. This product is brittle, has good adhesion on ABS and PS, has good scratch resi...展开 Picassian® AC-191 is a waterbased anionic styrene acrylic copolymer emulsion agent. It is used in consumer electronics, metallic coatings, and in general plastic applications. This product is brittle, has good adhesion on ABS and PS, has good scratch resistance properties, good alcohol resistance, has good hand cream resistance, is stable with treated aluminium flakes, and provides clear, very hard, and glossy films. 收起 | |
| Picassian® AC-192 | Stahl Polymers | Picassian® AC-192 is a waterbased, anionic, self crosslinking acrylic emulsion that contains free hydroxyl groups. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good chemical resistance properties, has good sc...展开 Picassian® AC-192 is a waterbased, anionic, self crosslinking acrylic emulsion that contains free hydroxyl groups. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good chemical resistance properties, has good scratch resistance properties, has good transparency properties, is easy to sand, is quick to sand, and is crosslinkable with isocyanates. 收起 | |
| Picassian® AC-213 | Stahl Polymers | Picassian® AC-213 is a waterbased anionic pure acrylic copolymer emulsion agent that is used in adhesives, textile coatings, and industrial shoe polish. It has good adhesion properties, good water resistance properties, good humidity resistance properties...展开 Picassian® AC-213 is a waterbased anionic pure acrylic copolymer emulsion agent that is used in adhesives, textile coatings, and industrial shoe polish. It has good adhesion properties, good water resistance properties, good humidity resistance properties, and improves scrub resistance properties. 收起 | |
| Picassian® AC-222 | Stahl Polymers | Picassian® AC-222 is a waterbased anionic alkali soluable acrylic copolymer emulsion agent. It is used in many wood and board coatings, basecoats, grinding binders, pigment sealers, flexo inks, gravure inks, leather finishes, and hobby adhesives. This pro...展开 Picassian® AC-222 is a waterbased anionic alkali soluable acrylic copolymer emulsion agent. It is used in many wood and board coatings, basecoats, grinding binders, pigment sealers, flexo inks, gravure inks, leather finishes, and hobby adhesives. This product has good pigment wetting attributes, high pigment loading capacity attributes, is quick to sand, and is quick to dry. 收起 | |
| Picassian® AC-246 | Stahl Polymers | Picassian® AC-246 is a waterbased, anionic, acrylic copolymer emulsion agent. It is used in inks, overprints, coated paper, metalized substrates, and glossy wood varnishes. This product has good holdout properties, good water resistance properties, good g...展开 Picassian® AC-246 is a waterbased, anionic, acrylic copolymer emulsion agent. It is used in inks, overprints, coated paper, metalized substrates, and glossy wood varnishes. This product has good holdout properties, good water resistance properties, good grease resistance properties, good alcohol compatibility, and good pigment compatibility. 收起 | |
| Picassian® AC-280 | Stahl Polymers | Picassian® AC-280 is a waterbased, anionic, styrene-acrylic copolymer emulsion agent. It is used as a high quality binder, in anticorrosive primers, and in clear and glossy finishes. This product has good blister resistance properties, good water resistan...展开 Picassian® AC-280 is a waterbased, anionic, styrene-acrylic copolymer emulsion agent. It is used as a high quality binder, in anticorrosive primers, and in clear and glossy finishes. This product has good blister resistance properties, good water resistance properties, good humidity resistance properties, good adhesion properties on many types of substrates, and good mechanical properties. 收起 | |
| Picassian® AC-295 | Stahl Polymers | Picassian® AC-295 is a waterbased anionic styrene acrylic copolymer emulsion agent. It is used in anticorrosive coatings, concrete flooring, and with UV coatings as a way of reducing cost. This product has good adhesive properties with metallic and plasti...展开 Picassian® AC-295 is a waterbased anionic styrene acrylic copolymer emulsion agent. It is used in anticorrosive coatings, concrete flooring, and with UV coatings as a way of reducing cost. This product has good adhesive properties with metallic and plastic substrates, is widely compatible with many types of binders, has good clarity properties, has good gloss properties, has good chemical resistance properties, and has fast hardness development properties. 收起 | |
| Picassian® PU-508 | Stahl Polymers | Picassian® PU-508 is a soft polyether aromatically modified polyurethane resin. It is used in flexo and gravure printing inks, in overprint varnishes, and in plasticizing grades of laminating inks. This product is tin free, TDI free, has good flexibility ...展开 Picassian® PU-508 is a soft polyether aromatically modified polyurethane resin. It is used in flexo and gravure printing inks, in overprint varnishes, and in plasticizing grades of laminating inks. This product is tin free, TDI free, has good flexibility properties, has good heat seal resistance properties, and has good adhesion on aluminium foil. 收起 | |
| Picassian® PU-518 | Stahl Polymers | Picassian® PU-518 is a non reactive, high molecular weighted, semi aliphatic polyether modified polyurethane resin. It is used in flexo and gravure inks, and as an adhesive promoter. This product is Tin free, TDI free, has good adhesion properties on alum...展开 Picassian® PU-518 is a non reactive, high molecular weighted, semi aliphatic polyether modified polyurethane resin. It is used in flexo and gravure inks, and as an adhesive promoter. This product is Tin free, TDI free, has good adhesion properties on aluminium foil, is soluble in alcohol rich mixtures, and is fully compatible with alcohol soluble nitrocellulose. 收起 | |
| Picassian® PU-546 | Stahl Polymers | Picassian® PU-546 is a non reactive, film forming, seal aliphatic, polyether modified polyurethane resin. It is used in flexo and gravure printing inks primarily, This product is tin free, TDI free, has pigment wetting attributes, is soluble in alcohol ri...展开 Picassian® PU-546 is a non reactive, film forming, seal aliphatic, polyether modified polyurethane resin. It is used in flexo and gravure printing inks primarily, This product is tin free, TDI free, has pigment wetting attributes, is soluble in alcohol rich mixtures, and has solvent retention values that are lower than those of conventional inks. 收起 | |
| Picassian® PU-548 | Stahl Polymers | Picassian® PU-548 is a non reactive, moderately tough, aromatic, polyester modified polyurethane resin. It is used as an adhesion promoter in gravure inks primarily. This product is tin free, TDI free, has good compatibility with other alcohol soluble res...展开 Picassian® PU-548 is a non reactive, moderately tough, aromatic, polyester modified polyurethane resin. It is used as an adhesion promoter in gravure inks primarily. This product is tin free, TDI free, has good compatibility with other alcohol soluble resins, and is very resistant to oils, water, and fats. 收起 | |
| Picassian® PU-551 | Stahl Polymers | Picassian® PU-551 is a film forming, semi-aliphatic, polyether modified polyurethane resin. It is used in sole binder inks, high speed flexo printing, and print plastics. This product has no webbing effect, has good adhesion properties, good dispersing pr...展开 Picassian® PU-551 is a film forming, semi-aliphatic, polyether modified polyurethane resin. It is used in sole binder inks, high speed flexo printing, and print plastics. This product has no webbing effect, has good adhesion properties, good dispersing properties, good wetting properties, good flow properties, good flexibility properties, and good blocking resistance properties. 收起 | |
| Picassian® PU-559 | Stahl Polymers | Picassian® PU-559 is a non reactive, moderately tough, aliphatic, polyether modified polyurethane resin. It is used in high performance flexo inks, high performance gravure inks, and non yellowing nitrocellulose based gravure inks. This product provides g...展开 Picassian® PU-559 is a non reactive, moderately tough, aliphatic, polyether modified polyurethane resin. It is used in high performance flexo inks, high performance gravure inks, and non yellowing nitrocellulose based gravure inks. This product provides good adhesion properties when used on polyolefin flims, has good compatibility with many kinds of resins, has good resistance properties with water, and many types of fat and oil. 收起 | |
| Picassian® PU-635 | Stahl Polymers | Picassian® PU-635 is an aqueous, non ionic dispersion of an aliphatic polyester urethane. It is used in leather basecoats, and in textiles. This product has low hardness properties, gives films high elongation properties, gives films good flexibility prop...展开 Picassian® PU-635 is an aqueous, non ionic dispersion of an aliphatic polyester urethane. It is used in leather basecoats, and in textiles. This product has low hardness properties, gives films high elongation properties, gives films good flexibility properties, is crosslinkable at room temperature, and is highly compatible with other binders. 收起 | |
| Picassian® PU-648 | Stahl Polymers | Picassian® PU-648 is a waterbased anionic dispersion of an aliphatic polyether urethane. It is used in leather basecoats, textiles, and graphic arts. This product is solvent free, has good UV resistance properties, low water absorption properties, good co...展开 Picassian® PU-648 is a waterbased anionic dispersion of an aliphatic polyether urethane. It is used in leather basecoats, textiles, and graphic arts. This product is solvent free, has good UV resistance properties, low water absorption properties, good coverage properties, good filling properties, and maintains flexibility at negative 30 degrees Celsius. 收起 | |
| Picassian® XL-701 | Stahl Polymers | Picassian® XL-701 is a multifunctional polycarbodiimide crosslinker that is suitable for use in solvent based systems and aqueous systems. It crosslinks carboxyl functional polymers at room temperature, and should be stored under a nitrogen atmosphere. Th...展开 Picassian® XL-701 is a multifunctional polycarbodiimide crosslinker that is suitable for use in solvent based systems and aqueous systems. It crosslinks carboxyl functional polymers at room temperature, and should be stored under a nitrogen atmosphere. This product is a yellow, slightly hazy liquid with a solid content of 50 percent. 收起 | |
| Picassian® XL-702 | Stahl Polymers | Picassian® XL-702 is a waterbased polycarbodiimide crosslinker that does not yellow. It is used in exterior environments, and water based systems. This product is label free, crosslinks carboxyl function polymers at room temperature, and should be formula...展开 Picassian® XL-702 is a waterbased polycarbodiimide crosslinker that does not yellow. It is used in exterior environments, and water based systems. This product is label free, crosslinks carboxyl function polymers at room temperature, and should be formulated at a pH greater than 8 to achieve a long pot life. 收起 | |
| Picassian® XL-725 | Stahl Polymers | Picassian® XL-725 is a multifunctional polycarbodiimide crosslinker that is a clear, yellow liquid in form. It is used in aqueous based systems and solvent based systems. This product has good water and chemical resistance properties, good abrasion and ma...展开 Picassian® XL-725 is a multifunctional polycarbodiimide crosslinker that is a clear, yellow liquid in form. It is used in aqueous based systems and solvent based systems. This product has good water and chemical resistance properties, good abrasion and mar resistance properties, and has good adhesion properties with some types of substrates. 收起 | |
| Picassian® XL-732 | Stahl Polymers | Picassian® XL-732 is a waterbased polycarbodiimide crosslinker. It is used in water based systems, is VOC free, and is label free. This product has good water and chemical resistance properties, good abrasion and mar resistance properties, and has good ad...展开 Picassian® XL-732 is a waterbased polycarbodiimide crosslinker. It is used in water based systems, is VOC free, and is label free. This product has good water and chemical resistance properties, good abrasion and mar resistance properties, and has good adhesion properties with some types of substrates. 收起 | |
| Relca® HY-460 | Stahl Polymers | Relca® HY-460 is an aqueous anionic dispersion of an alkyd modified aliphatic urethane. It is used in decorative applications, interior DTM applications, exterior DTM applications, interior wood coatings, and exterior wood coating applications. This produ...展开 Relca® HY-460 is an aqueous anionic dispersion of an alkyd modified aliphatic urethane. It is used in decorative applications, interior DTM applications, exterior DTM applications, interior wood coatings, and exterior wood coating applications. This product has fast drying properties, good adhesion properties, good shear stability properties, good pigment wetting properties, and is solvent free. 收起 | |
| Relca® HY-625 | Stahl Polymers | Relca® HY-625 is an aqueous anionic dispersion of an aliphatic polyester urethane. It is used in wood and parquet flooring, furniture coatings, and wood coatings. This product is solvent free, has good Taber abrasion resistance properties, good water resi...展开 Relca® HY-625 is an aqueous anionic dispersion of an aliphatic polyester urethane. It is used in wood and parquet flooring, furniture coatings, and wood coatings. This product is solvent free, has good Taber abrasion resistance properties, good water resistance properties, good hydrolysis resistance properties, high hardness properties, and good adhesion properties with wood. 收起 | |
| Relca® PU-406 | Stahl Polymers | Relca® PU-406 is an aqueous anionic dispersion of an aliphatic polycarbonate urethane. It is used in leather and textile finishes, and soft touch coatings. This product is NMP free, has good alcohol resistance properties, good water resistance properties,...展开 Relca® PU-406 is an aqueous anionic dispersion of an aliphatic polycarbonate urethane. It is used in leather and textile finishes, and soft touch coatings. This product is NMP free, has good alcohol resistance properties, good water resistance properties, good chemical resistance properties, good UV resistance properties, good heat resistance properties, and good adhesion properties. 收起 | |
| Relca® PU-415 | Stahl Polymers | Relca® PU-415 is an aqueous anionic dispersion of an aliphatic polyether urethane. It is used in textiles, and as an adhesive for transfer basecoats and coatings. This product is also used in leather, textile, and natural substrate formulations. It has go...展开 Relca® PU-415 is an aqueous anionic dispersion of an aliphatic polyether urethane. It is used in textiles, and as an adhesive for transfer basecoats and coatings. This product is also used in leather, textile, and natural substrate formulations. It has good water resistance properties and good compatibility properties with other binders. 收起 | |
| Relca® PU-476 | Stahl Polymers | Relca® PU-476 is an aqueous anionic dispersion of an alkyd modified aliphatic urethane. It is used in interior DTM applications, wood coatings, and parquet flooring. This product is solvent free, has good open time properties, high hardness properties, go...展开 Relca® PU-476 is an aqueous anionic dispersion of an alkyd modified aliphatic urethane. It is used in interior DTM applications, wood coatings, and parquet flooring. This product is solvent free, has good open time properties, high hardness properties, good adhesion properties, good chemical resistance properties, good pigment wetting properties, good scratch resistance properties, and good black heel mar resistance properties. 收起 |
