| Advantage™ AM1512A | Ashland | Advantage™ AM1512A is a 100% active foam control agent designed specifically for use in water-based paint systems. It is a high efficiency, hydrocarbon oil-based antifoaming agent and is formulated to control foam at any point during manufacture, packagin...展开 Advantage™ AM1512A is a 100% active foam control agent designed specifically for use in water-based paint systems. It is a high efficiency, hydrocarbon oil-based antifoaming agent and is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH and it is effective in the presence of many surfactants. Advantage™ AM1512A foam control agent is readily dispersible, has an outstanding long-term foam control persistency, and Advantage™ AW8176 defoamer is readily dispersible, has very good long-term persistency, and it is recommended for architectural paints, emulsions plasters, pigment/filler slurries, as well as industrial wood coatings. 收起 | |
| Aquaflow™ NHS-300 | Ashland | Aquaflow™ NHS-300 is a rheology modifier for waterborne architectural coatings. A solvent-free, nonionic associative polymer solution designed to increase high-shear viscosity and provide superior flow and leveling in latex paints. | |
| Aquaflow™ NHS-350 | Ashland | Aquaflow™ NHS-350 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. | |
| Aquaflow™ NHS-355 | Ashland | Aquaflow™ NHS-355 rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development...展开 Aquaflow™ NHS-355 rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build, and favorable brush drag. As an APEO-free and solvent-free product, Aquaflow™ NHS-355 rheology modifier is recommended for low VOC formulations. It is supplied as a low viscosity liquid for ease of handling. The performance of the product is independent of paint pH 收起 | |
| Aquaflow™ NHS-360 | Ashland | Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings, and is compatible with most modern latex resin systems and all sheens. This thickener prov...展开 Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings, and is compatible with most modern latex resin systems and all sheens. This thickener provides highly efficient ICI viscosity development, excellent film build, optimal flow and leveling and favorable brush drag. 收起 | |
| Aquaflow™ NLS-200 | Ashland | Aquaflow™ NLS-200 is a rheology modifier for waterborne architectural coatings. A nonionic associative polymer solution designed to build stormer viscosity and provide superior flow and leveling in latex paints. | |
| Aquaflow™ NLS-210 | Ashland | Aquaflow™ NLS-210 is a nonionic associative polymer solution designed to increase Stormer consistency and provide superior flow and leveling in waterborne paints and coatings. | |
| Aquaflow™ NLS-220 | Ashland | Aquaflow™ NLS-220 is a solvent free nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. It can be used with a wide variety of binder chemistries including v...展开 Aquaflow™ NLS-220 is a solvent free nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. It can be used with a wide variety of binder chemistries including vinyl acrylics, ethylene vinyl acetates, alkyd emulsions and in particular pure acrylics and styrene acrylics. It rapidly equilibrates to target low- or mid-shear viscosity with no negative impact on gloss or color stability. 收起 | |
| Aquaflow™ NMS-450 | Ashland | Aquaflow™ NMS-450 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. | |
| Aquaflow™ NMS-460E | Ashland | Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of S...展开 Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of Stormer (KU) viscosity along with high-shear (ICI) viscosity, and thus can be considered a mid-shear effective thickener that can function as the sole thickener in many paint formulation based on hydrophobic resins, such as acrylics and styrene acrylics. With more hydrophilic resins, such as vinyl acetate ethylene (VAE), optimized rheology may be achieved with Aquaflow™ NMS-460E rheology modifier alone or in combination with a supplemental KU driver. 收起 | |
| Aquaflow™ XLS-500 | Ashland | Aquaflow™ XLS-500 is non-ionic synthetic associative rheology modifier for low-VOC acrylic based paints & coatings. | |
| Aquaflow™ XLS-525 | Ashland | Aquaflow™ XLS-525 is a non-ionic synthetic associative rheology modifier for low-VOC paints and coatings. | |
| Aquaflow™ XLS-530 | Ashland | Aquaflow™ XLS-530 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. | |
| Culminal™ C-types modified cellulose ethers | Ashland | Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plas...展开 Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plasters, fillers, adhesives and spackling compounds, cement and lime based plasters, tile cements and similar products. 收起 | |
| Dextrol™ OC-110 | Ashland | Dextrol™ OC-110 is the free-acid form of a nonyl phenol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-15 | Ashland | Dextrol™ OC-15 is the free acid form of a nonyl phenol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-180 | Ashland | 它是一种乙氧基化脂肪醇磷酸酯的中和态（钾盐）。它设计用于为水性乳胶漆改善光泽度和颜色接受性 | |
| Dextrol™ OC-180HS Phosphate Ester Surfactant | Ashland | Dextrol™ OC-180HS表面活性剂是乙氧基脂肪醇磷酸酯的中和（钠盐）形式。它设计用于改善光泽度和在水性乳胶漆中的色彩接受度。根据配方的不同特点，这款产品还可以用作有助于减少颜料凝絮的补充分散剂。除了在乳胶漆中使用，Dextrol™ OC-180HS表面活性剂还可以提供普遍着色特性，有助于分散和稳定颜料，从而改善水基油漆的色彩接受度。 | |
| Dextrol™ OC-50 | Ashland | Dextrol™ OC-50 is the neutralized (sodium salt) form of a nonyl phenol ethoxylated phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. | |
| Dextrol™ OC-60 | Ashland | Dextrol™ OC-60 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-60EP | Ashland | Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...展开 Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-60EP surfactant can be neutralized using several organic or inorganic bases. Dextrol OC-60EP surfactant also imparts improved gloss and color acceptance in waterborne latex paints. 收起 | |
| Dextrol™ OC-70 | Ashland | Dextrol™ OC-70 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-70EP | Ashland | Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...展开 Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-70EP phosphate ester surfactant can be neutralized by the user using a number of organic or inorganic bases. 收起 | |
| Drewplus* L-3500 Foam Control Agent | Ashland | Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spr...展开 Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spray, air mix or HVLP. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. 收起 | |
| Drewplus™ L-3510 Foam Control Agent | Ashland | Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatib...展开 Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. 收起 | |
| Drewplus™ TS-4384 Foam Control Agent | Ashland | Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-glos...展开 Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss acrylic architectural paints, water- based parquet lacquers. Excellent results have also been obtained in acrylic anti- corrosive primers, flexographic printing inks and water-reducible alkyd based systems. Drewplus™ TS-4384 foam control agent is highly efficient and exhibits excellent persistency. 收起 | |
| Drewplus™ TS-4481 Foam Control Agent | Ashland | Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and c...展开 Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and compatibility. Since it functions as an air release agent it is particularly effective on microfoam in spray-applied industrial coatings. 收起 | |
| Fujicure 205-L | Sanho Chemical Co., Ltd. | Fujicure 205-L is a modified cycloaliphatic curing agent in a light honey-colored liquid form. This product has a viscosity of less than 400-700 mPa.s. Fujicure 205-L is most commonly used in solvent-free paint formulation applications. | |
| Fujicure 4030 | Sanho Chemical Co., Ltd. | Fujicure 4030 is a modified aromatic polyamine epoxy curing agent in a brown-colored viscous liquid form. This product has a total solids content of 66-70%. Fujicure 4030 is most commonly used in epoxy paint formulation applications. | |
| Fujicure 4200 | Sanho Chemical Co., Ltd. | Fujicure 4200 is a modified cycloaliphatic polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of less than 1700-2700 mPa.s. Fujicure 4200 is most commonly used in coating formulation applications. | |
| Fujicure 4233 | Sanho Chemical Co., Ltd. | Fujicure 4233 is a low viscosity, modified cycloaliphatic polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of 650-900 mPa.s and a specific gravity of 0.95. Fujicure 4233 is most commonly used in coating formulatio...展开 Fujicure 4233 is a low viscosity, modified cycloaliphatic polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of 650-900 mPa.s and a specific gravity of 0.95. Fujicure 4233 is most commonly used in coating formulation applications. 收起 | |
| Fujicure 5000 | Sanho Chemical Co., Ltd. | Fujicure 5000 is a low viscosity, modified cycloaliphatic polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-2500 mPa.s and a specific gravity of 1.02. Fujicure 5000 is most commonly used in adhesive ...展开 Fujicure 5000 is a low viscosity, modified cycloaliphatic polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-2500 mPa.s and a specific gravity of 1.02. Fujicure 5000 is most commonly used in adhesive and solvent-based coating formulation applications. 收起 | |
| Fujicure 5003 | Sanho Chemical Co., Ltd. | Fujicure 5003 is a modified cycloaliphatic polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 3500-7500 mPa.s and a specific gravity of 1.08. Fujicure 5003 is most commonly used in coating formulation app...展开 Fujicure 5003 is a modified cycloaliphatic polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 3500-7500 mPa.s and a specific gravity of 1.08. Fujicure 5003 is most commonly used in coating formulation applications. 收起 | |
| Fujicure 5003-D | Sanho Chemical Co., Ltd. | Fujicure 5003-D is a modified cycloaliphatic amine in a light yellow-colored viscous liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.10. Fujicure 5003-D is most commonly used in coating formulation applications. | |
| Fujicure 5250 | Sanho Chemical Co., Ltd. | Fujicure 5250 is a modified cycloaliphatic polyamine in a light yellow-colored viscous liquid form. This product has a viscosity of 6000-14,000 mPa.s and a specific gravity of 1.10. Fujicure 5250 is most commonly used in coating formulation applications. | |
| Fujicure 5260 | Sanho Chemical Co., Ltd. | Fujicure 5260 is a modified cycloaliphatic polyamine in a light brown-colored viscous liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.03. Fujicure 5260 is most commonly used in epoxy mortar formulation applications...展开 Fujicure 5260 is a modified cycloaliphatic polyamine in a light brown-colored viscous liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.03. Fujicure 5260 is most commonly used in epoxy mortar formulation applications. 收起 | |
| Fujicure 5300 | Sanho Chemical Co., Ltd. | Fujicure 5300 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-1700 mPa.s and a specific gravity of 1.02. Fujicure 5300 is most commonly used in adhesive and self-...展开 Fujicure 5300 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-1700 mPa.s and a specific gravity of 1.02. Fujicure 5300 is most commonly used in adhesive and self-leveling coating formulation applications. 收起 | |
| Fujicure 5420 | Sanho Chemical Co., Ltd. | Fujicure 5420 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure 5420 is most commonly used in concrete adhesive f...展开 Fujicure 5420 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure 5420 is most commonly used in concrete adhesive formulation applications. 收起 | |
| Fujicure FX-220 | Sanho Chemical Co., Ltd. | Fujicure FX-220 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure FX-220 is most commonly used in coating and adh...展开 Fujicure FX-220 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure FX-220 is most commonly used in coating and adhesive formulation applications. 收起 | |
| Fujicure FXD-821 | Sanho Chemical Co., Ltd. | Fujicure FXD-821 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 40-70 mPa.s and a specific gravity of 0.95. Fujicure FXD-821 is most commonly used in surface coating, resin mortar, and adhesiv...展开 Fujicure FXD-821 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 40-70 mPa.s and a specific gravity of 0.95. Fujicure FXD-821 is most commonly used in surface coating, resin mortar, and adhesive formulation applications. 收起 | |
| Fujicure FXD-822 | Sanho Chemical Co., Ltd. | Fujicure FXD-822 is a modified cycloaliphatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.03. Fujicure FXD-822 is most commonly used in solvent-free coating and m...展开 Fujicure FXD-822 is a modified cycloaliphatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.03. Fujicure FXD-822 is most commonly used in solvent-free coating and mortar formulation applications. 收起 | |
| Fujicure FXK-832 | Sanho Chemical Co., Ltd. | Fujicure FXK-832 is a modified amine-type hardener in a light yellow-colored viscous liquid form. This product has a viscosity of 2000-5000 mPa.s and a specific gravity of 1.06. Fujicure FXK-832 is most commonly used in coating formulation applications. | |
| Fujicure FXM-823B | Sanho Chemical Co., Ltd. | Fujicure FXM-823B is a modified aromatic amine-based epoxy resin curing agent in a free flowing, reddish-brown-colored liquid form. This product has a viscosity of 1000-1400 mPa.s and a specific gravity of 1.16. Fujicure FXM-823B is most commonly used in ...展开 Fujicure FXM-823B is a modified aromatic amine-based epoxy resin curing agent in a free flowing, reddish-brown-colored liquid form. This product has a viscosity of 1000-1400 mPa.s and a specific gravity of 1.16. Fujicure FXM-823B is most commonly used in coal tar-epoxy coating applications. 收起 | |
| Fujicure FXM-824A | Sanho Chemical Co., Ltd. | Fujicure FXM-824A is a modified activated aromatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 2500-3500 mPa.s and a specific gravity of 1.13. Fujicure FXM-824A is most commonly used in tar and epoxy coat...展开 Fujicure FXM-824A is a modified activated aromatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 2500-3500 mPa.s and a specific gravity of 1.13. Fujicure FXM-824A is most commonly used in tar and epoxy coating formulation applications. 收起 | |
| Fujicure FXM-824B | Sanho Chemical Co., Ltd. | Fujicure FXM-824B is a modified activated aromatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 2000-3000 mPa.s and a specific gravity of 1.12. Fujicure FXM-824B is most commonly used in tar and epoxy coat...展开 Fujicure FXM-824B is a modified activated aromatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 2000-3000 mPa.s and a specific gravity of 1.12. Fujicure FXM-824B is most commonly used in tar and epoxy coating formulation applications. 收起 | |
| Fujicure FXR-1020 | Sanho Chemical Co., Ltd. | Fujicure FXR-1020 is a latent-type curing agent and accelerator in a light yellow-colored powder form. This product has a viscosity of 1200-2500 mPa.s. Fujicure FXR-1020 is most commonly used in powder coating formulation applications. | |
| Fujicure FXR-1030 | Sanho Chemical Co., Ltd. | Fujicure FXR-1030 is a latent-type epoxy resin curing agent and accelerator in a white-colored powder form. This product has a specific gravity of 1.09. Fujicure FXR-1030 is most commonly used in powder coating formulation applications. | |
| Fujicure FXR-1081 | Sanho Chemical Co., Ltd. | Fujicure FXR-1081 is a latent-type epoxy resin curing agent and accelerator in a white-colored powder form. This product has a specific gravity of 1.11. Fujicure FXR-1081 is most commonly used in powder coating formulation applications. | |
| Fujicure FXR-1090-FA | Sanho Chemical Co., Ltd. | Fujicure FXR-1090-FA is a latent-type epoxy resin curing agent and accelerator in a white-colored powder form. This product has a specific gravity of 1.11 and a softening point of 118°C. Fujicure FXR-1090-FA is most commonly used in powder coating formula...展开 Fujicure FXR-1090-FA is a latent-type epoxy resin curing agent and accelerator in a white-colored powder form. This product has a specific gravity of 1.11 and a softening point of 118°C. Fujicure FXR-1090-FA is most commonly used in powder coating formulation applications. 收起 | |
| HIGREE™ C5 Petroleum Resin | Qingdao Higree Chemical Co., Ltd. | HIGREE™ C5 Petroleum Resin is a light color hydrocarbon resin that has a low molecular weight. This product is manufactured from aliphatic petroleum monomers. It is compatible with base polymers in adhesives and sealants and enhances tack and adhesion. HI...展开 HIGREE™ C5 Petroleum Resin is a light color hydrocarbon resin that has a low molecular weight. This product is manufactured from aliphatic petroleum monomers. It is compatible with base polymers in adhesives and sealants and enhances tack and adhesion. HIGREE™ C5 Petroleum Resin is primarily used as an additive in PSA, hot melt adhesives, sealants, and thermoplastic road marking paints. 收起 | |
| HIGREE™ C9 Petroleum Resin | Qingdao Higree Chemical Co., Ltd. | HIGREE™ C9 Petroleum Resin is a hydrocarbon resin that is primarily used as an additive in solvent based adhesives, hot melt adhesives, alkyd based paints, and printing inks. | |
| HIGREE™ CL100 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ CL100 is a light color hydrocarbon resin with a low molecular weight. It has a specific gravity of 0.94-0.99 g/cm3 and an ash content of 0.05%. This product is manufactured from aliphatic petroleum-derived monomers, and it is primarily used as an ...展开 HIGREE™ CL100 is a light color hydrocarbon resin with a low molecular weight. It has a specific gravity of 0.94-0.99 g/cm3 and an ash content of 0.05%. This product is manufactured from aliphatic petroleum-derived monomers, and it is primarily used as an additive in road marking paint, hot melt adhesive, and PSA. 收起 | |
| HIGREE™ CL1102 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ CL1102 is a pale yellow hydrocarbon resin obtained from polymerizing unsaturated aliphatic monomers from the process of cracking of naphtha. It has a specific gravity of 0.94-0.99 g/cm3 and an ash content of 0.05%. This product is specially design...展开 HIGREE™ CL1102 is a pale yellow hydrocarbon resin obtained from polymerizing unsaturated aliphatic monomers from the process of cracking of naphtha. It has a specific gravity of 0.94-0.99 g/cm3 and an ash content of 0.05%. This product is specially designed as a binder for thermoplastic road marking formulations. 收起 | |
| HIGREE™ GD120 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GD120 is a hydrocarbon resin with a low molecular weight and excellent resistance to acid, alkalies, and moisture. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from aromatic petroleum-deriv...展开 HIGREE™ GD120 is a hydrocarbon resin with a low molecular weight and excellent resistance to acid, alkalies, and moisture. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from aromatic petroleum-derived monomers, and it is primarily used as an additive in hot melt adhesives, solvent based adhesives, and industrial paints. 收起 | |
| HIGREE™ GD130 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GD130 is a hydrocarbon resin with a low molecular weight and excellent resistance to acid, alkalies, and moisture. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from aromatic petroleum-deriv...展开 HIGREE™ GD130 is a hydrocarbon resin with a low molecular weight and excellent resistance to acid, alkalies, and moisture. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from aromatic petroleum-derived monomers, and it is primarily used as an additive in hot melt adhesives, solvent based adhesives, and industrial paints. 收起 | |
| HIGREE™ GL100 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GL100 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily use...展开 HIGREE™ GL100 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily used as an additive in hot melt adhesives and industrial paints. 收起 | |
| HIGREE™ GL120 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GL120 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily use...展开 HIGREE™ GL120 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily used as an additive in hot melt adhesives and industrial paints. 收起 | |
| HIGREE™ GP100 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GP100 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from aromatic petroleum-derived monomers, and it is primarily ...展开 HIGREE™ GP100 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from aromatic petroleum-derived monomers, and it is primarily used as an additive in hot melt adhesives and paints. 收起 | |
| HIGREE™ GP120 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GP120 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily use...展开 HIGREE™ GP120 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily used as an additive in hot melt adhesives and industrial paints. 收起 | |
| HIGREE™ GP130 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GP130 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily use...展开 HIGREE™ GP130 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily used as an additive in hot melt adhesives and industrial paints. 收起 | |
| HIGREE™ GP140 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GP140 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily use...展开 HIGREE™ GP140 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily used as an additive in hot melt adhesives and industrial paints. 收起 | |
| HIGREE™ GP150 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GP150 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily use...展开 HIGREE™ GP150 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily used as an additive in hot melt adhesives, inks, and industrial paints. 收起 | |
| HIGREE™ GR100 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GR100 is a pale yellow thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has good resistance to alkalies and acid, and it is primarily used as an addit...展开 HIGREE™ GR100 is a pale yellow thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has good resistance to alkalies and acid, and it is primarily used as an additive in industrial paints. 收起 | |
| HIGREE™ GR120 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GR120 is a pale yellow thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has good resistance to alkalies and acid, and it is primarily used as an addit...展开 HIGREE™ GR120 is a pale yellow thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has good resistance to alkalies and acid, and it is primarily used as an additive in industrial paints and solvent adhesives. 收起 | |
| HIGREE™ GV100 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GV100 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily ...展开 HIGREE™ GV100 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily used as an additive in industrial paints and hot melt adhesives. 收起 | |
| HIGREE™ GV120 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GV120 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily ...展开 HIGREE™ GV120 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily used as an additive in industrial paints, inks, and hot melt adhesives. 收起 | |
| HIGREE™ GV130 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GV130 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily ...展开 HIGREE™ GV130 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily used as an additive in industrial paints, inks, and adhesives. 收起 | |
| HIGREE™ GV140 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GV140 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily ...展开 HIGREE™ GV140 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily used as an additive in industrial paints, printing inks, and hot melt adhesives. 收起 | |
| HIGREE™ GV150 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GV150 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily ...展开 HIGREE™ GV150 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily used as an additive in industrial paints, printing inks, and hot melt adhesives. 收起 | |
| JMT-150ANO | Tayca Corporation | JMT-150ANO is a cationic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150AO | Tayca Corporation | JMT-150AO is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150FI | Tayca Corporation | JMT-150FI is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150IB | Tayca Corporation | JMT-150IB is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JR-301 | Tayca Corporation | JR-301 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .3µm particle...展开 JR-301 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .3µm particle size and 18 g/100g of oil absorption. 收起 | |
| JR-403 | Tayca Corporation | JR-403 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average ....展开 JR-403 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25µm particle size and 19 g/100g of oil absorption. 收起 | |
| JR-405 | Tayca Corporation | JR-405 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .21µm particl...展开 JR-405 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .21µm particle size and 15 g/100g of oil absorption. 收起 | |
| JR-600A | Tayca Corporation | JR-600A is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm partic...展开 JR-600A is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particle size and 19 g/100g of oil absorption. 收起 | |
| JR-600E | Tayca Corporation | JR-600E is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .27µm partic...展开 JR-600E is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .27µm particle size and 21 g/100g of oil absorption. 收起 | |
| JR-603 | Tayca Corporation | JR-603 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and zirconium with an average...展开 JR-603 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and zirconium with an average .28µm particle size and 21 g/100g of oil absorption. 收起 | |
| JR-605 | Tayca Corporation | JR-605 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particl...展开 JR-605 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particle size and 19 g/100g of oil absorption. 收起 | |
| JR-701 | Tayca Corporation | JR-701 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an av...展开 JR-701 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an average .27µm particle size and 20 g/100g of oil absorption. 收起 | |
| JR-800 | Tayca Corporation | JR-800 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .27...展开 JR-800 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .27µm particle size and 29 g/100g of oil absorption. 收起 | |
| JR-805 | Tayca Corporation | JR-805 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .29...展开 JR-805 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .29µm particle size and 22 g/100g of oil absorption. 收起 | |
| JR-806 | Tayca Corporation | JR-806 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25...展开 JR-806 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25µm particle size and 21 g/100g of oil absorption. 收起 | |
| JRNC | Tayca Corporation | JRNC is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an aver...展开 JRNC is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an average .27µm particle size and 21 g/100g of oil absorption. 收起 | |
| K-White #105 | Tayca Corporation | K-White #105 is a white powder aluminum triphosphate with an average particle size of 1.6 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White #105 is a white powder aluminum triphosphate with an average particle size of 1.6 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #140W | Tayca Corporation | K-White #140W is a white powder aluminum triphosphate with an average particle size of 2.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White #140W is a white powder aluminum triphosphate with an average particle size of 2.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #450H | Tayca Corporation | K-White #450H is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White #450H is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #82 | Tayca Corporation | K-White #82 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #82 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #84 | Tayca Corporation | K-White #84 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #84 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #84S | Tayca Corporation | K-White #84S is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White #84S is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #85 | Tayca Corporation | K-White #85 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #85 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #94 | Tayca Corporation | K-White #94 is a white powder aluminum triphosphate with an average particle size of 6.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #94 is a white powder aluminum triphosphate with an average particle size of 6.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White Ca650 | Tayca Corporation | K-White Ca650 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White Ca650 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White G105 | Tayca Corporation | K-White G105 is a white powder aluminum triphosphate with an average particle size of 2.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White G105 is a white powder aluminum triphosphate with an average particle size of 2.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| Kingcure 100-BD | Sanho Chemical Co., Ltd. | Kingcure 100-BD is a modified aliphatic polyamine epoxy curing agent in a light yellow-colored liquid form. This product has a viscosity of 3000-6000 mPa.s. Kingcure 100-BD is most commonly used in solvent-free coating formulation applications. | |
| Kingcure 2010 | Sanho Chemical Co., Ltd. | Kingcure 2010 is a reactive polyamide epoxy resin curing agent in a light honey-colored viscous liquid form. This product has a viscosity of 1200-2000 mPa.s and a specific gravity of 0.96. Kingcure 2010 is most commonly used in concrete adhesive formulati...展开 Kingcure 2010 is a reactive polyamide epoxy resin curing agent in a light honey-colored viscous liquid form. This product has a viscosity of 1200-2000 mPa.s and a specific gravity of 0.96. Kingcure 2010 is most commonly used in concrete adhesive formulation applications. 收起 | |
| Kingcure 2040-MS | Sanho Chemical Co., Ltd. | Kingcure 2040-MS is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 2000-6000 mPa.s and a specific gravity of 1.08. Kingcure 2040-MS is most commonly used in fast-setting adhesive formulation appli...展开 Kingcure 2040-MS is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 2000-6000 mPa.s and a specific gravity of 1.08. Kingcure 2040-MS is most commonly used in fast-setting adhesive formulation applications. 收起 | |
| Kingcure 451-P | Sanho Chemical Co., Ltd. | Kingcure 451-P is a modified activated aromatic amine epoxy resin curing agent in a dark brown-colored liquid form. This product has a viscosity of 3000-8000 mPa.s and a specific gravity of 1.09. Kingcure 451-P is most commonly used in coating formulation...展开 Kingcure 451-P is a modified activated aromatic amine epoxy resin curing agent in a dark brown-colored liquid form. This product has a viscosity of 3000-8000 mPa.s and a specific gravity of 1.09. Kingcure 451-P is most commonly used in coating formulation applications. 收起 | |
| Kingcure 515-KD | Sanho Chemical Co., Ltd. | Kingcure 515-KD is a modified cycloaliphatic polyamine adduct curing agent in an amber-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.01. Kingcure 515-KD is most commonly used in solvent-free coating and adh...展开 Kingcure 515-KD is a modified cycloaliphatic polyamine adduct curing agent in an amber-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.01. Kingcure 515-KD is most commonly used in solvent-free coating and adhesive formulation applications. 收起 |
