| Benzyl Alcohol | Prakash Chemical Intl. Pvt. Ltd. | Benzyl Alcohol is a clear liquid that can be used as a solvent in marine paints, ball pen inks, paint stripper, lacquers and waterborne coating applications. This product has a moisture content of 0.10% and a specific gravity of 1.040 to 1.050 at 25°C. | |
| Calcium Octoate CA-10 | Prakash Chemical Intl. Pvt. Ltd. | Calcium Octoate CA-10 is a pale yellow liquid that has a low viscosity and functions as an auxiliary drier. This product is primarily used in combination with Lead and Cobalt Octoate in alkyd finishes. When combined with Cobalt, it will increase the effic...展开 Calcium Octoate CA-10 is a pale yellow liquid that has a low viscosity and functions as an auxiliary drier. This product is primarily used in combination with Lead and Cobalt Octoate in alkyd finishes. When combined with Cobalt, it will increase the efficiency of Cobalt drier in the paint medium. This particular grade has a metal content of 10% (± 0.2) and a specific gravity of 0.98 at 300°C (± 0.03). 收起 | |
| Calcium Octoate CA-3 | Prakash Chemical Intl. Pvt. Ltd. | Calcium Octoate CA-3 is a pale yellow liquid that has a low viscosity and functions as an auxiliary drier. This product is primarily used in combination with Lead and Cobalt Octoate in alkyd finishes. When combined with Cobalt, it will increase the effici...展开 Calcium Octoate CA-3 is a pale yellow liquid that has a low viscosity and functions as an auxiliary drier. This product is primarily used in combination with Lead and Cobalt Octoate in alkyd finishes. When combined with Cobalt, it will increase the efficiency of Cobalt drier in the paint medium. This particular grade has a metal content of 3% (± 0.2) and a specific gravity of 0.84 at 300°C (± 0.03). 收起 | |
| Calcium Octoate CA-5 | Prakash Chemical Intl. Pvt. Ltd. | Calcium Octoate CA-5 is a pale yellow liquid that has a low viscosity and functions as an auxiliary drier. This product is primarily used in combination with Lead and Cobalt Octoate in alkyd finishes. When combined with Cobalt, it will increase the effici...展开 Calcium Octoate CA-5 is a pale yellow liquid that has a low viscosity and functions as an auxiliary drier. This product is primarily used in combination with Lead and Cobalt Octoate in alkyd finishes. When combined with Cobalt, it will increase the efficiency of Cobalt drier in the paint medium. This particular grade has a metal content of 5% (± 0.2) and a specific gravity of 0.9 at 300°C (± 0.03). 收起 | |
| Cardanol | Prakash Chemical Intl. Pvt. Ltd. | Cardanol is a pale straw yellow liquid that is used in epoxy primers for industrial and marine paints and coatings. This product can be utilized as a compatibalizer in Polysiloxane modified epoxy coatings. It has a specific gravity of 0.927-0.934 at 30°C ...展开 Cardanol is a pale straw yellow liquid that is used in epoxy primers for industrial and marine paints and coatings. This product can be utilized as a compatibalizer in Polysiloxane modified epoxy coatings. It has a specific gravity of 0.927-0.934 at 30°C and a hydroxyl value of 180-200. 收起 | |
| Cobalt Octoate CO-10 | Prakash Chemical Intl. Pvt. Ltd. | Cobalt Octoate CO-10 is a bluish violet liquid that has a low viscosity and functions as the most active surface drier. It is primarily used in conjunction with auxiliary driers, and will increase the ability to dry rapidly. This particular grade has a m...展开 Cobalt Octoate CO-10 is a bluish violet liquid that has a low viscosity and functions as the most active surface drier. It is primarily used in conjunction with auxiliary driers, and will increase the ability to dry rapidly. This particular grade has a metal content of 10% (± 0.2) and a specific gravity of 0.97 at 300°C (± 0.03). 收起 | |
| Cobalt Octoate CO-12 | Prakash Chemical Intl. Pvt. Ltd. | Cobalt Octoate CO-12 is a bluish violet liquid that has a low viscosity and functions as the most active surface drier. It is primarily used in conjunction with auxiliary driers, and will increase the ability to dry rapidly. This particular grade has a me...展开 Cobalt Octoate CO-12 is a bluish violet liquid that has a low viscosity and functions as the most active surface drier. It is primarily used in conjunction with auxiliary driers, and will increase the ability to dry rapidly. This particular grade has a metal content of 12% (± 0.2) and a specific gravity of 1.02 at 300°C (± 0.03). 收起 | |
| Cobalt Octoate CO-3 | Prakash Chemical Intl. Pvt. Ltd. | Cobalt Octoate CO-3 is a bluish violet liquid that has a low viscosity and functions as the most active surface drier. It is primarily used in conjunction with auxiliary driers, and will increase the ability to dry rapidly. This particular grade has a met...展开 Cobalt Octoate CO-3 is a bluish violet liquid that has a low viscosity and functions as the most active surface drier. It is primarily used in conjunction with auxiliary driers, and will increase the ability to dry rapidly. This particular grade has a metal content of 3% (± 0.2) and a specific gravity of 0.82 at 300°C (± 0.03). 收起 | |
| Cobalt Octoate CO-6 | Prakash Chemical Intl. Pvt. Ltd. | Cobalt Octoate CO-6 is a bluish violet liquid that has a low viscosity and functions as the most active surface drier. It is primarily used in conjunction with auxiliary driers, and will increase the ability to dry rapidly. This particular grade has a met...展开 Cobalt Octoate CO-6 is a bluish violet liquid that has a low viscosity and functions as the most active surface drier. It is primarily used in conjunction with auxiliary driers, and will increase the ability to dry rapidly. This particular grade has a metal content of 6% (± 0.2) and a specific gravity of 0.88 at 300°C (± 0.03). 收起 | |
| Cobalt Octoate CO-8 | Prakash Chemical Intl. Pvt. Ltd. | Cobalt Octoate CO-8 is a bluish violet liquid that has a low viscosity and functions as the most active surface drier. It is primarily used in conjunction with auxiliary driers, and will increase the ability to dry rapidly. This particular grade has a met...展开 Cobalt Octoate CO-8 is a bluish violet liquid that has a low viscosity and functions as the most active surface drier. It is primarily used in conjunction with auxiliary driers, and will increase the ability to dry rapidly. This particular grade has a metal content of 8% (± 0.2) and a specific gravity of 0.93 at 300°C (± 0.03). 收起 | |
| Copper Octoate CU-8 | Prakash Chemical Intl. Pvt. Ltd. | Copper Octoate CU-8 is a dark green substance that is often used in unsaturated polyester resins to improve its functionality. This product can be utilized in marine paints because it has excellent fungicidal and anti-fouling properties. It can also be us...展开 Copper Octoate CU-8 is a dark green substance that is often used in unsaturated polyester resins to improve its functionality. This product can be utilized in marine paints because it has excellent fungicidal and anti-fouling properties. It can also be used in wood protective lacquers to prevent mildew growth and rotting. 收起 | |
| Ethyl Acetate | Prakash Chemical Intl. Pvt. Ltd. | Ethyl Acetate is the ester of ethanol and acetic acid, and is manufactured on a large scale for use as a solvent. This product can be used in a variety of coating formulations such as epoxies, urethanes, cellulosics, acrylics and vinyls. It can also be us...展开 Ethyl Acetate is the ester of ethanol and acetic acid, and is manufactured on a large scale for use as a solvent. This product can be used in a variety of coating formulations such as epoxies, urethanes, cellulosics, acrylics and vinyls. It can also be used in solvent based flexographic and rotogravure inks and glues. 收起 | |
| JMT-150ANO | Tayca Corporation | JMT-150ANO is a cationic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150AO | Tayca Corporation | JMT-150AO is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150FI | Tayca Corporation | JMT-150FI is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150IB | Tayca Corporation | JMT-150IB is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JR-301 | Tayca Corporation | JR-301 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .3µm particle...展开 JR-301 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .3µm particle size and 18 g/100g of oil absorption. 收起 | |
| JR-403 | Tayca Corporation | JR-403 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average ....展开 JR-403 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25µm particle size and 19 g/100g of oil absorption. 收起 | |
| JR-405 | Tayca Corporation | JR-405 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .21µm particl...展开 JR-405 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .21µm particle size and 15 g/100g of oil absorption. 收起 | |
| JR-600A | Tayca Corporation | JR-600A is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm partic...展开 JR-600A is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particle size and 19 g/100g of oil absorption. 收起 | |
| JR-600E | Tayca Corporation | JR-600E is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .27µm partic...展开 JR-600E is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .27µm particle size and 21 g/100g of oil absorption. 收起 | |
| JR-603 | Tayca Corporation | JR-603 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and zirconium with an average...展开 JR-603 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and zirconium with an average .28µm particle size and 21 g/100g of oil absorption. 收起 | |
| JR-605 | Tayca Corporation | JR-605 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particl...展开 JR-605 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particle size and 19 g/100g of oil absorption. 收起 | |
| JR-701 | Tayca Corporation | JR-701 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an av...展开 JR-701 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an average .27µm particle size and 20 g/100g of oil absorption. 收起 | |
| JR-800 | Tayca Corporation | JR-800 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .27...展开 JR-800 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .27µm particle size and 29 g/100g of oil absorption. 收起 | |
| JR-805 | Tayca Corporation | JR-805 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .29...展开 JR-805 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .29µm particle size and 22 g/100g of oil absorption. 收起 | |
| JR-806 | Tayca Corporation | JR-806 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25...展开 JR-806 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25µm particle size and 21 g/100g of oil absorption. 收起 | |
| JRNC | Tayca Corporation | JRNC is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an aver...展开 JRNC is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an average .27µm particle size and 21 g/100g of oil absorption. 收起 | |
| K-White #105 | Tayca Corporation | K-White #105 is a white powder aluminum triphosphate with an average particle size of 1.6 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White #105 is a white powder aluminum triphosphate with an average particle size of 1.6 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #140W | Tayca Corporation | K-White #140W is a white powder aluminum triphosphate with an average particle size of 2.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White #140W is a white powder aluminum triphosphate with an average particle size of 2.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #450H | Tayca Corporation | K-White #450H is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White #450H is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #82 | Tayca Corporation | K-White #82 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #82 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #84 | Tayca Corporation | K-White #84 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #84 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #84S | Tayca Corporation | K-White #84S is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White #84S is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #85 | Tayca Corporation | K-White #85 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #85 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #94 | Tayca Corporation | K-White #94 is a white powder aluminum triphosphate with an average particle size of 6.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #94 is a white powder aluminum triphosphate with an average particle size of 6.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White Ca650 | Tayca Corporation | K-White Ca650 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White Ca650 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White G105 | Tayca Corporation | K-White G105 is a white powder aluminum triphosphate with an average particle size of 2.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White G105 is a white powder aluminum triphosphate with an average particle size of 2.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...展开 KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. 收起 | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...展开 KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. 收起 | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...展开 KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. 收起 | |
| Lead Octoate PB-18 | Prakash Chemical Intl. Pvt. Ltd. | Lead Octoate PB-18 is a pale yellow liquid and is used as an active top drier in paints and coatings. This product provides hard, through drying throughout the film and also provides flexibility. It is the most important auxiliary drier in applications wh...展开 Lead Octoate PB-18 is a pale yellow liquid and is used as an active top drier in paints and coatings. This product provides hard, through drying throughout the film and also provides flexibility. It is the most important auxiliary drier in applications where drying is required at low temperatures. It has a metal content of 18 % (± 0.2) and a specific gravity of 0.98 at 300°C (± 0.03). 收起 | |
| Lead Octoate PB-24 | Prakash Chemical Intl. Pvt. Ltd. | Lead Octoate PB-24 is a pale yellow liquid and is used as an active top drier in paints and coatings. This product provides hard, through drying throughout the film and also provides flexibility. It is the most important auxiliary drier in applications wh...展开 Lead Octoate PB-24 is a pale yellow liquid and is used as an active top drier in paints and coatings. This product provides hard, through drying throughout the film and also provides flexibility. It is the most important auxiliary drier in applications where drying is required at low temperatures. It has a metal content of 24% (± 0.2) and a specific gravity of 1.08 at 300°C (± 0.03). 收起 | |
| Lead Octoate PB-36 | Prakash Chemical Intl. Pvt. Ltd. | Lead Octoate PB-36 is a pale yellow liquid and is used as an active top drier in paints and coatings. This product provides hard, through drying throughout the film and also provides flexibility. It is the most important auxiliary drier in applications wh...展开 Lead Octoate PB-36 is a pale yellow liquid and is used as an active top drier in paints and coatings. This product provides hard, through drying throughout the film and also provides flexibility. It is the most important auxiliary drier in applications where drying is required at low temperatures. It has a metal content of 36% (± 0.2) and a specific gravity of 1.33 at 300°C (± 0.03). 收起 | |
| Manganese Octoate MN-10 | Prakash Chemical Intl. Pvt. Ltd. | Manganese Octoate MN-10 is a brown liquid that is primarily used in floor finishes, backing enamels, and in exterior paints where color is not a constraint. This product is a strong oxidant and acts as an active drier metal, and it promotes polymerization...展开 Manganese Octoate MN-10 is a brown liquid that is primarily used in floor finishes, backing enamels, and in exterior paints where color is not a constraint. This product is a strong oxidant and acts as an active drier metal, and it promotes polymerization more efficiently than cobalt. It has a metal content of 10% (± 0.2) and a specific gravity of 0.98 at 300°C (± 0.03). 收起 | |
| Manganese Octoate MN-6 | Prakash Chemical Intl. Pvt. Ltd. | Manganese Octoate MN-6 is a brown liquid that is primarily used in floor finishes, backing enamels, and in exterior paints where color is not a constraint. This product is a strong oxidant and acts as an active drier metal, and it promotes polymerization ...展开 Manganese Octoate MN-6 is a brown liquid that is primarily used in floor finishes, backing enamels, and in exterior paints where color is not a constraint. This product is a strong oxidant and acts as an active drier metal, and it promotes polymerization more efficiently than cobalt. It has a metal content of 6% (± 0.2) and a specific gravity of 0.89 at 300°C (± 0.03). 收起 | |
| Manganese Octoate MN-8 | Prakash Chemical Intl. Pvt. Ltd. | Manganese Octoate MN-8 is a brown liquid that is primarily used in floor finishes, backing enamels, and in exterior paints where color is not a constraint. This product is a strong oxidant and acts as an active drier metal, and it promotes polymerization ...展开 Manganese Octoate MN-8 is a brown liquid that is primarily used in floor finishes, backing enamels, and in exterior paints where color is not a constraint. This product is a strong oxidant and acts as an active drier metal, and it promotes polymerization more efficiently than cobalt. It has a metal content of 8% (± 0.2) and a specific gravity of 0.93 at 300°C (± 0.03). 收起 | |
| Methyl Ethyl Ketoxime | Prakash Chemical Intl. Pvt. Ltd. | Methyl Ethyl Ketoxime is an essential chemical used as an anti-skinning agent in paints and lacquers. This product can be used as an urethane blocking agent for coating applications which include powder coatings, automotive coatings, and coatings on plast...展开 Methyl Ethyl Ketoxime is an essential chemical used as an anti-skinning agent in paints and lacquers. This product can be used as an urethane blocking agent for coating applications which include powder coatings, automotive coatings, and coatings on plastic, textiles and general industrial metal. 收起 | |
| MSN-002 | Tayca Corporation | MSN-002 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSN-003 | Tayca Corporation | MSN-003 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSN-007 | Tayca Corporation | MSN-007 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-001 | Tayca Corporation | MSP-001 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-005 | Tayca Corporation | MSP-005 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-009 | Tayca Corporation | MSP-009 is a cationic silica dioxide with an average primary particle size of 80 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-012 | Tayca Corporation | MSP-012 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MT-01 | Tayca Corporation | MT-01 is a micro titanium dioxide (10nm) that contains aluminum and stearic acid and can be used in pigments, paints and inks to provide water repellency, transparency and dispersibility. | |
| MT-05 | Tayca Corporation | MT-05 is a micro titanium dioxide (10nm) that contains aluminum and silicon and can be used in pigments, paints and inks to provide water repellency, transparency and low activity. | |
| MT-100AQ | Tayca Corporation | MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints,...展开 MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100HD | Tayca Corporation | MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100S | Tayca Corporation | MT-100S is a micro titanium dioxide (15nm) that contains aluminum and lauric acid and can be used in pigments, paints and inks to provide water repellency, lipophilic characteristics and affinity with resin. | |
| MT-100SA | Tayca Corporation | MT-100SA is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electr...展开 MT-100SA is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100WP | Tayca Corporation | MT-100WP is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon. It exhibits good water affinity, compatibility with water-soluble thickening agents and dispersibility in applications such...展开 MT-100WP is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon. It exhibits good water affinity, compatibility with water-soluble thickening agents and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100Z | Tayca Corporation | MT-100Z is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and stearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks an...展开 MT-100Z is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and stearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-10EX | Tayca Corporation | MT-10EX is a micro titanium dioxide (10nm) that contains aluminum and isostearic acid and can be used in pigments, paints and inks to provide transparency, dispersibility and low viscosity when dispersed in oil phase. | |
| MT-150A | Tayca Corporation | MT-150A is an unprocessed titanium dioxide with an average primary particle size of 15 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
| MT-150EX | Tayca Corporation | MT-150EX is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and isostearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, ink...展开 MT-150EX is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and isostearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-150W | Tayca Corporation | MT-150W is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with sodium metaphosphate. It exhibits good transparency and dispersibility in applications such as paints, inks and electrophotography. | |
| MT-300HD | Tayca Corporation | MT-300HD is a micro-fine titanium dioxide with an average primary particle size of 25 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-300HD is a micro-fine titanium dioxide with an average primary particle size of 25 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-500B | Tayca Corporation | MT-500B is an unprocessed titanium dioxide with an average primary particle size of 35 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
| MT-500HD | Tayca Corporation | MT-500HD is a micro-fine titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-500HD is a micro-fine titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-500SA | Tayca Corporation | MT-500SA is a titanium dioxide with an average primary particle size of 35 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in pa...展开 MT-500SA is a titanium dioxide with an average primary particle size of 35 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
| MT-500SAS | Tayca Corporation | MT-500SAS is a titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with silicone oil, silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance and water repellency. It is ...展开 MT-500SAS is a titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with silicone oil, silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance and water repellency. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
| MT-600B | Tayca Corporation | MT-600B is an unprocessed titanium dioxide with an average primary particle size of 50 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
| MT-600SA | Tayca Corporation | MT-600SA is a titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in pa...展开 MT-600SA is a titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
| MT-700B | Tayca Corporation | MT-700B is an unprocessed titanium dioxide with an average primary particle size of 80 nm. It is suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency is desired. | |
| MT-700HD | Tayca Corporation | MT-700HD is a micro-fine titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-700HD is a micro-fine titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MTY-02 | Tayca Corporation | MTY-02 is a micro-fine titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good transparency, water repellency and dispersibility in applications such as paints,...展开 MTY-02 is a micro-fine titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MTY-110M3S | Tayca Corporation | MTY-110M3S is a micro-fine, low viscosity titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good water repellency, transparency and dispersibility in applicati...展开 MTY-110M3S is a micro-fine, low viscosity titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good water repellency, transparency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MTY-150ANO | Tayca Corporation | MTY-150ANO is a cationic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MTY-150AO | Tayca Corporation | MTY-150AO is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MTY-150FI | Tayca Corporation | MTY-150FI is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MTY-150IB | Tayca Corporation | MTY-150IB is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MTY-700BS | Tayca Corporation | MTY-700BS is a titanium dioxide with an average primary particle size of 80 nm. It is surface treated with silicone oil, making it suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency ...展开 MTY-700BS is a titanium dioxide with an average primary particle size of 80 nm. It is surface treated with silicone oil, making it suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency and water repellency is desired. 收起 | |
| MZ-300 | Tayca Corporation | MZ-300 is an untreated micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good transparency and UV-A shielding properties in formulations for paints and inks. | |
| MZ-306X | Tayca Corporation | MZ-306X is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good transparency, water repellency, dispersibility and UV-A shielding properties in formulations for paints and inks. | |
| MZ-500 | Tayca Corporation | MZ-500 is an untreated micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency in formulations for paints and inks. | |
| MZ-506X | Tayca Corporation | MZ-506X is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits good water repellency, dispersal and transparency properties in formulations for paints and inks. | |
| MZ-510HPSX | Tayca Corporation | MZ-510HPSX is a silica and silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency and good light resistance in formulations for paints and inks. | |
| MZY-303S | Tayca Corporation | MZY-303S is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good water repellency, transparency and UV-A shielding properties in formulations for paints and inks. | |
| MZY-505S | Tayca Corporation | MZY-505S is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits good water repellency and transparency properties in formulations for paints and inks. | |
| MZY-510M3S | Tayca Corporation | MZY-510M3S is a low viscosity, silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency in formulations for paints and inks. | |
| Polyvinyl Acetate Emulsion | Prakash Chemical Intl. Pvt. Ltd. | Polyvinyl Acetate Emulsion is a water based unplasticized polyvinyl acetate homopolymer emulsion stabilized with polyvinyl alcohol. It can be used as a coating binder in water based paints, industrial paints, and architectural paints. This product can als...展开 Polyvinyl Acetate Emulsion is a water based unplasticized polyvinyl acetate homopolymer emulsion stabilized with polyvinyl alcohol. It can be used as a coating binder in water based paints, industrial paints, and architectural paints. This product can also be used for producing superior quality wood/paper/building adhesives and can provide high tensile strength with superior shear stability. 收起 | |
| Pure Acrylic Emulsion Paint Binder | Prakash Chemical Intl. Pvt. Ltd. | Pure Acrylic Emulsion Paint Binder is an acrylic based emulsion resin which is suitable for exterior paint applications. It is primarily used as a binder for highly pigmented emulsion paint for interior and exterior paint applications. This product can pr...展开 Pure Acrylic Emulsion Paint Binder is an acrylic based emulsion resin which is suitable for exterior paint applications. It is primarily used as a binder for highly pigmented emulsion paint for interior and exterior paint applications. This product can provide semi gloss/matte finish, good tinting strength, and good scrub resistance. 收起 | |
| Ruikang R-938 | Xichang Ruikang Titanium Industry Co., Ltd. | Ruikang R-938 is a special rutile titanium dioxide pigment that is manufactured by organic surface treatments and ultrafine grinding. This product has excellent chalk resistance, excellent gloss retention, high tinting strength and gloss, and manufacturin...展开 Ruikang R-938 is a special rutile titanium dioxide pigment that is manufactured by organic surface treatments and ultrafine grinding. This product has excellent chalk resistance, excellent gloss retention, high tinting strength and gloss, and manufacturing consistency. It is recommended to be used in automobile paints for high quality results. 收起 | |
| Ruikang R-998 | Xichang Ruikang Titanium Industry Co., Ltd. | Ruikang R-998 is a universal rutile titanium dioxide pigment. This product has excellent chalk resistance, excellent gloss retention, high tinting strength and gloss, and manufacturing consistency. It is used in a variety of applications including coating...展开 Ruikang R-998 is a universal rutile titanium dioxide pigment. This product has excellent chalk resistance, excellent gloss retention, high tinting strength and gloss, and manufacturing consistency. It is used in a variety of applications including coatings and inks. 收起 | |
| Styrene Acrylic Copolymer Emulsion | Prakash Chemical Intl. Pvt. Ltd. | Styrene Acrylic Copolymer Emulsion is a water-based dispersion emulsion of styrene acrylic copolymer. It is a surfactant stabilized colloid free emulsion that has excellent pigment loading characteristics, alkali resistance, and good binding capacity to h...展开 Styrene Acrylic Copolymer Emulsion is a water-based dispersion emulsion of styrene acrylic copolymer. It is a surfactant stabilized colloid free emulsion that has excellent pigment loading characteristics, alkali resistance, and good binding capacity to hold texture aggregates. This product is used for producing semi gloss to matt finish emulsion paint, interior and exterior architectural structure. 收起 | |
| Titanix JA-1 | Tayca Corporation | Titanix JA-1 is a photocatalytic, pigment grade anatase titanium dioxide. It is comprised of 99% TiO2 with a neutral pH balance. It is suitable for use in paints and coatings. | |
| TKC-303 | Tayca Corporation | TKC-303 is a titania coating of an anatase crystal structure. This product contains a high TiO2 concentration that can harden at room temperature and exhibit high photocatalytic activity plus high film hardness. | |
| TKC-304 | Tayca Corporation | TKC-304 is a titania coating of an anatase crystal structure. This product contains a neutral to high TiO2 concentration that can harden at room temperature and exhibit high photocatalytic activity plus high film hardness. | |
| TKC-305 | Tayca Corporation | TKC-305 is a titania coating of an anatase crystal structure. This product contains titanyl ammonium oxalate that can exhibit very high film hardness by calcination(500°C). |
