| ANTIGEL® | Bernd Schwegmann GmbH & Co. KG | Antigel®主要用于基于醇酸、醇酸/三聚氰胺、硝化纤维化合物和聚酯的含溶剂体系。Antigel®应用于基于醇酸或醇酸/丙烯酸的水稀释体系中，也具有上述性能 | |
| ANTIGEL® HS | Bernd Schwegmann GmbH & Co. KG | 具有良好润湿性和分散性的粘度稳定剂，尤其适合高固体份涂料体系，不含酮肟和芳香族化合物，可生物降解 | |
| ANTIGEL® KF | Bernd Schwegmann GmbH & Co. KG | ANTIGEL® KF是一种多功能助剂，适合溶剂型和水性涂料体系。它不含酮肟和芳香族化合物，可生物降解。ANTIGEL® KF-D的多功能性源于各组分的协同增效作用。其稳定作用基于抗氧化剂的氧结合特性。ANTIGEL® KF-D改善了流平性和全干性。ANTIGEL® KF-D降低常用亲水颜料和憎水基料之间的界面张力。颜料颗粒分布均匀，因而色度深。可减少分散时间、絮凝和沉降现象，提升光泽度。大大避免了沉降发生。由于它具有出色的润湿性，可获得最佳的颜色深度 | |
| ANTIGEL® KF-D | Bernd Schwegmann GmbH & Co. KG | Antigel® KF/KF-D可用于几乎所有常规水性和溶剂型油漆体系中 | |
| BLISTER FREE 3 | Bernd Schwegmann GmbH & Co. KG | Blister Free 3可用于含溶剂和水稀释体系。在含溶剂体系中，Blister Free 3作为消泡剂尤为有效，也可部分作为流平剂。它适用于以下基料：醇酸、醇酸/聚酯-、不饱和聚酯-、NC-、AC-、PU和丙烯酸体系。Blister Free 3在水稀释涂料体系中也非常有效，尤其是基于醇酸/丙烯酸、饱和聚酯和环氧体系 | |
| BLISTER FREE 45 | Bernd Schwegmann GmbH & Co. KG | Blister Free 45在以下溶剂型体系中具有良好的消泡效果，基于硝基纤维素、酸催化、通用聚氨酯。Blister Free 45对于水稀释涂料也具有非常好的消泡效果，基于以下基料：聚酯、酸性树脂、丙烯酸 | |
| BLISTER FREE 54 | Bernd Schwegmann GmbH & Co. KG | Blister Free 54可有效应用于几乎所有含溶剂单或多组分油漆和涂料体系，包括自干和烘烤醇酸、环氧体系、PU体系、丙烯酸，特殊的应用领域是印刷油墨和卷材涂料体系 | |
| BLISTER FREE 55 | Bernd Schwegmann GmbH & Co. KG | Blister Free 55在各种水性醇酸体系中具有出色的消泡效果，例如那些中和后变水溶性，以及在醇酸乳液中，含或不含助溶剂的。在很多改性醇酸和醇酸/丙烯酸混合体系中也具有非常好的消泡效果 | |
| BLISTER FREE 56 | Bernd Schwegmann GmbH & Co. KG | Blister Free 56 可用于UV固化体系。它可用于下面提到的水稀释体系。Blister Free 56具有良好的消泡效果，它在这些体系：醇酸/丙烯酸油漆、饱和聚酯、环氧中有部分流平功能 | |
| BLISTER FREE 66 | Bernd Schwegmann GmbH & Co. KG | Blister Free 66可作为消泡剂应用于所有常规涂料体系中。Blister Free 66 在基于聚酯、聚氨酯和丙烯酸酯的体系中尤为有效 | |
| BLISTER FREE 75 | Bernd Schwegmann GmbH & Co. KG | Blister Free 75在常规NC体系和NC混合体系、AC和环氧体系、PU和自干丙烯酸体系中具有良好的消泡效果。Blister Free 75在基于以下基料：长油度醇酸、中油度醇酸、丙烯酸酯/中油度醇酸、丙烯酸酯/长油度醇酸、环氧的水稀释涂料体系中具有非常好的消泡效果 | |
| BLISTER FREE 77 | Bernd Schwegmann GmbH & Co. KG | 完全消泡是形成一个出色涂膜的必要条件。吸附的空气、针孔会导致灰尘粘附并造成喷涂面漆和抛光操作困难。除了导致这些表面缺陷，它也经常会降低光泽和耐水性。Blister Free 77可相当大程度上减少气泡形成，造成强烈消泡，并均一地形成不饱和聚酯蜡层 | |
| BLISTER FREE 88 | Bernd Schwegmann GmbH & Co. KG | Blister Free 88是一种表面活性添加剂，会影响表面张力。该性能可减少在油漆的生产或施工过程中气泡的形成。任何形成的气泡都可被快速摧毁。通常Blister Free 88对涂膜流平具有良好的效果 | |
| Cimsil A35 | Tolsa SA | Cimsil A35 is a powdered additive that modifies the rheology of mortar, gypsum plaster, and concrete. It is a thixotropic additive specifically developed to act as an anti-sagging, anti-slipping agent that improves the work ability and visual finish in ...展开 Cimsil A35 is a powdered additive that modifies the rheology of mortar, gypsum plaster, and concrete. It is a thixotropic additive specifically developed to act as an anti-sagging, anti-slipping agent that improves the work ability and visual finish in the systems to which it is incorporated. It can be used in ceramic adhesives, ready mixed adhesives, crack fillers, and pastes. 收起 | |
| Cimsil A55G | Tolsa SA | Cimsil A55G is a thixotropic powder additive. It can be used in cement and/or lime and gypsum systems. It is used as an additive for mortars and stuccos rendering, tile adhesive mortars, self-leveling mortars, and waterproofing mortars. | |
| Cimsil C22 | Tolsa SA | Cimsil C22 is a water dispersible powdered additive for use in mortars. It is developed to act as a water-retaining agent and a rheological additive. It can be used for projected renders and stuccos, skim coats, and monolayer mortars. | |
| Cimsil CT1 | Tolsa SA | Cimsil CT1 is a water dispersible powdered additive. It is developed to act as a water-retaining agent and as an anti-sliding additive in formulations of tile adhesive mortars. It can be used in mortars and tile adhesives. | |
| Cimsil CT2 | Tolsa SA | Cimsil CT2 is a water dispersible powdered additive. It is developed to act as a water-retaining agent and as an anti-sliding additive in formulations of tile adhesives. It can be used in mortars and tile adhesives. | |
| Cimsil D10 | Tolsa SA | Cimsil D10 is a water dispersible powdered additive. It is designed to act as a water-retaining agent and an anti-sliding additive. It can be used in ceramic adhesives, adhesives, crack fillers, and pastes. | |
| Cimsil G30 | Tolsa SA | Cimsil G30 is an attapulgite based additive developed to modify the rheology of wet and dry joint compounds and adhesives. It is developed to improve sag resistance of the compound before drying or setting. It can be used in wet and dry joint fillers, s...展开 Cimsil G30 is an attapulgite based additive developed to modify the rheology of wet and dry joint compounds and adhesives. It is developed to improve sag resistance of the compound before drying or setting. It can be used in wet and dry joint fillers, spackle compounds, crack fillers, mastics, and sealants. 收起 | |
| Cimsil G50 | Tolsa SA | Cimsil G50 is a thixotropic and shear thinning additive. It is developed as an anti-sagging agent in gypsum systems. It can be used for gypsum spray plasters, gypsum compounds, and gypsum based adhesives. | |
| Fillite Standard Grades | Tolsa SA | Fillite Standard Grades consists of glass hard, inert, hollow silicate spheres. It is designed to reduce the weight of plastics, rubbers, resins, and cement. It can be used in PVC flooring, brake linings, phenolics and epoxies, cast polyesters, wallboar...展开 Fillite Standard Grades consists of glass hard, inert, hollow silicate spheres. It is designed to reduce the weight of plastics, rubbers, resins, and cement. It can be used in PVC flooring, brake linings, phenolics and epoxies, cast polyesters, wallboard joint compounds, oil well cement, and tile adhesives. 收起 | |
| Fillite White / High-Alumina Grades | Tolsa SA | Fillite White / High Alumina Grades consists of glass hard, inert, hollow silicate spheres. It is designed to reduce the weights fo plastics, rubbers, resins, and cement. It can be used for gypsum board jointing compounds, veneering plasters, stuccos, s...展开 Fillite White / High Alumina Grades consists of glass hard, inert, hollow silicate spheres. It is designed to reduce the weights fo plastics, rubbers, resins, and cement. It can be used for gypsum board jointing compounds, veneering plasters, stuccos, sealants, coatings, cast resins, refractories, foundry applications, or high temperatures resistant coatings. 收起 | |
| JMT-150ANO | Tayca Corporation | JMT-150ANO is a cationic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150AO | Tayca Corporation | JMT-150AO is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150FI | Tayca Corporation | JMT-150FI is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150IB | Tayca Corporation | JMT-150IB is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JR-301 | Tayca Corporation | JR-301 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .3µm particle...展开 JR-301 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .3µm particle size and 18 g/100g of oil absorption. 收起 | |
| JR-403 | Tayca Corporation | JR-403 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average ....展开 JR-403 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25µm particle size and 19 g/100g of oil absorption. 收起 | |
| JR-405 | Tayca Corporation | JR-405 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .21µm particl...展开 JR-405 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .21µm particle size and 15 g/100g of oil absorption. 收起 | |
| JR-600A | Tayca Corporation | JR-600A is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm partic...展开 JR-600A is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particle size and 19 g/100g of oil absorption. 收起 | |
| JR-600E | Tayca Corporation | JR-600E is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .27µm partic...展开 JR-600E is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .27µm particle size and 21 g/100g of oil absorption. 收起 | |
| JR-603 | Tayca Corporation | JR-603 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and zirconium with an average...展开 JR-603 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and zirconium with an average .28µm particle size and 21 g/100g of oil absorption. 收起 | |
| JR-605 | Tayca Corporation | JR-605 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particl...展开 JR-605 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particle size and 19 g/100g of oil absorption. 收起 | |
| JR-701 | Tayca Corporation | JR-701 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an av...展开 JR-701 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an average .27µm particle size and 20 g/100g of oil absorption. 收起 | |
| JR-800 | Tayca Corporation | JR-800 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .27...展开 JR-800 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .27µm particle size and 29 g/100g of oil absorption. 收起 | |
| JR-805 | Tayca Corporation | JR-805 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .29...展开 JR-805 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .29µm particle size and 22 g/100g of oil absorption. 收起 | |
| JR-806 | Tayca Corporation | JR-806 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25...展开 JR-806 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25µm particle size and 21 g/100g of oil absorption. 收起 | |
| JRNC | Tayca Corporation | JRNC is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an aver...展开 JRNC is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an average .27µm particle size and 21 g/100g of oil absorption. 收起 | |
| K-White #105 | Tayca Corporation | K-White #105 is a white powder aluminum triphosphate with an average particle size of 1.6 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White #105 is a white powder aluminum triphosphate with an average particle size of 1.6 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #140W | Tayca Corporation | K-White #140W is a white powder aluminum triphosphate with an average particle size of 2.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White #140W is a white powder aluminum triphosphate with an average particle size of 2.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #450H | Tayca Corporation | K-White #450H is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White #450H is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #82 | Tayca Corporation | K-White #82 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #82 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #84 | Tayca Corporation | K-White #84 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #84 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #84S | Tayca Corporation | K-White #84S is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White #84S is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #85 | Tayca Corporation | K-White #85 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #85 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #94 | Tayca Corporation | K-White #94 is a white powder aluminum triphosphate with an average particle size of 6.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #94 is a white powder aluminum triphosphate with an average particle size of 6.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White Ca650 | Tayca Corporation | K-White Ca650 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White Ca650 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White G105 | Tayca Corporation | K-White G105 is a white powder aluminum triphosphate with an average particle size of 2.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White G105 is a white powder aluminum triphosphate with an average particle size of 2.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| KORRODUR | Bernd Schwegmann GmbH & Co. KG | Korrodur主要作为一种锈转化助剂应用于常规醇酸树脂涂料中。然而，Korrodur在基于环氧、氯化橡胶或丙烯酸基料的含溶剂油漆中也有良好效果。典型应用：防锈底漆、单层防腐蚀体系、修补面漆 | |
| KORRODUR AL 2 | Bernd Schwegmann GmbH & Co. KG | Korrodur AL 2用于底漆中消除差的基材和差强人意的喷涂条件的影响。Korrodur AL 2可将残留的锈转换成非腐蚀性丹宁酸铁，并提供长期腐蚀保护。如果存在湿气，它会在喷涂过程中乳化进入膜中，干燥时会蒸发。润湿剂可确保对残留锈颗粒、灰尘的良好渗透以及对除油很差的表面的润湿 | |
| LA THIX FB | Bernd Schwegmann GmbH & Co. KG | 可增稠所有常规带极性基团基料的含溶剂体系。尤其适用于高膜厚体系、纹理烤漆、墙面和DIY油漆。主要优势为：液态，因此易添加、耐温、对光泽无负面影响、可防止沉降和流挂 | |
| Microsil 100 | Tolsa SA | Microsil 100 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor....展开 Microsil 100 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, textural paint, putties and mastics, and tile adhesives. 收起 | |
| Microsil 100S | Tolsa SA | Microsil 100S consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting...展开 Microsil 100S consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor that also require a lower viscosity or smaller absorption. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, textural paint, putties and mastics, and tile adhesives. 收起 | |
| Microsil 200 | Tolsa SA | Microsil 200 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor. ...展开 Microsil 200 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, putties and mastics, and tile adhesives. 收起 | |
| Microsil 200S | Tolsa SA | Microsil 200S consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting f...展开 Microsil 200S consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor that also require a lower viscosity or smaller absorption. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, putties and mastics, and tile adhesives. 收起 | |
| Microsil 325 | Tolsa SA | Microsil 325 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It was designed to be used in applications requiring a small particle size. It can be ...展开 Microsil 325 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It was designed to be used in applications requiring a small particle size. It can be used in synthetic marble and polymeric mortars, asphalt emulsions, resin based waterproofing coatings, friction materials, textural paints, putties, and mastics. 收起 | |
| Microsil 325S | Tolsa SA | Microsil 325 consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It was designed to be used in applications requiring a small particle size or in a...展开 Microsil 325 consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It was designed to be used in applications requiring a small particle size or in applications where a lower viscosity or smaller absorption is required. It can be used in synthetic marble and polymeric mortars, asphalt emulsions, resin based waterproofing coatings, friction materials, textural paints, putties, and mastics. 收起 | |
| MITTEL S | Bernd Schwegmann GmbH & Co. KG | Mittel S适用于几乎所有非水性体系，可高效应用于醇酸（自干）、醇酸/聚酯（热固化）、氯化橡胶、环氧、聚氨酯、热塑性丙烯酸和反应性丙烯酸体系 | |
| MSN-002 | Tayca Corporation | MSN-002 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSN-003 | Tayca Corporation | MSN-003 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSN-007 | Tayca Corporation | MSN-007 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-001 | Tayca Corporation | MSP-001 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-005 | Tayca Corporation | MSP-005 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-009 | Tayca Corporation | MSP-009 is a cationic silica dioxide with an average primary particle size of 80 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-012 | Tayca Corporation | MSP-012 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MT-01 | Tayca Corporation | MT-01 is a micro titanium dioxide (10nm) that contains aluminum and stearic acid and can be used in pigments, paints and inks to provide water repellency, transparency and dispersibility. | |
| MT-05 | Tayca Corporation | MT-05 is a micro titanium dioxide (10nm) that contains aluminum and silicon and can be used in pigments, paints and inks to provide water repellency, transparency and low activity. | |
| MT-100AQ | Tayca Corporation | MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints,...展开 MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100HD | Tayca Corporation | MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100S | Tayca Corporation | MT-100S is a micro titanium dioxide (15nm) that contains aluminum and lauric acid and can be used in pigments, paints and inks to provide water repellency, lipophilic characteristics and affinity with resin. | |
| MT-100SA | Tayca Corporation | MT-100SA is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electr...展开 MT-100SA is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100WP | Tayca Corporation | MT-100WP is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon. It exhibits good water affinity, compatibility with water-soluble thickening agents and dispersibility in applications such...展开 MT-100WP is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon. It exhibits good water affinity, compatibility with water-soluble thickening agents and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100Z | Tayca Corporation | MT-100Z is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and stearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks an...展开 MT-100Z is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and stearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-10EX | Tayca Corporation | MT-10EX is a micro titanium dioxide (10nm) that contains aluminum and isostearic acid and can be used in pigments, paints and inks to provide transparency, dispersibility and low viscosity when dispersed in oil phase. | |
| MT-150A | Tayca Corporation | MT-150A is an unprocessed titanium dioxide with an average primary particle size of 15 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
| MT-150EX | Tayca Corporation | MT-150EX is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and isostearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, ink...展开 MT-150EX is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and isostearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-150W | Tayca Corporation | MT-150W is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with sodium metaphosphate. It exhibits good transparency and dispersibility in applications such as paints, inks and electrophotography. | |
| MT-300HD | Tayca Corporation | MT-300HD is a micro-fine titanium dioxide with an average primary particle size of 25 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-300HD is a micro-fine titanium dioxide with an average primary particle size of 25 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-500B | Tayca Corporation | MT-500B is an unprocessed titanium dioxide with an average primary particle size of 35 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
| MT-500HD | Tayca Corporation | MT-500HD is a micro-fine titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-500HD is a micro-fine titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-500SA | Tayca Corporation | MT-500SA is a titanium dioxide with an average primary particle size of 35 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in pa...展开 MT-500SA is a titanium dioxide with an average primary particle size of 35 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
| MT-500SAS | Tayca Corporation | MT-500SAS is a titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with silicone oil, silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance and water repellency. It is ...展开 MT-500SAS is a titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with silicone oil, silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance and water repellency. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
| MT-600B | Tayca Corporation | MT-600B is an unprocessed titanium dioxide with an average primary particle size of 50 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
| MT-600SA | Tayca Corporation | MT-600SA is a titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in pa...展开 MT-600SA is a titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
| MT-700B | Tayca Corporation | MT-700B is an unprocessed titanium dioxide with an average primary particle size of 80 nm. It is suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency is desired. | |
| MT-700HD | Tayca Corporation | MT-700HD is a micro-fine titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-700HD is a micro-fine titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MTY-02 | Tayca Corporation | MTY-02 is a micro-fine titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good transparency, water repellency and dispersibility in applications such as paints,...展开 MTY-02 is a micro-fine titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MTY-110M3S | Tayca Corporation | MTY-110M3S is a micro-fine, low viscosity titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good water repellency, transparency and dispersibility in applicati...展开 MTY-110M3S is a micro-fine, low viscosity titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good water repellency, transparency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MTY-150ANO | Tayca Corporation | MTY-150ANO is a cationic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MTY-150AO | Tayca Corporation | MTY-150AO is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MTY-150FI | Tayca Corporation | MTY-150FI is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MTY-150IB | Tayca Corporation | MTY-150IB is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MTY-700BS | Tayca Corporation | MTY-700BS is a titanium dioxide with an average primary particle size of 80 nm. It is surface treated with silicone oil, making it suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency ...展开 MTY-700BS is a titanium dioxide with an average primary particle size of 80 nm. It is surface treated with silicone oil, making it suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency and water repellency is desired. 收起 | |
| MZ-300 | Tayca Corporation | MZ-300 is an untreated micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good transparency and UV-A shielding properties in formulations for paints and inks. | |
| MZ-306X | Tayca Corporation | MZ-306X is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good transparency, water repellency, dispersibility and UV-A shielding properties in formulations for paints and inks. | |
| MZ-500 | Tayca Corporation | MZ-500 is an untreated micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency in formulations for paints and inks. | |
| MZ-506X | Tayca Corporation | MZ-506X is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits good water repellency, dispersal and transparency properties in formulations for paints and inks. | |
| MZ-510HPSX | Tayca Corporation | MZ-510HPSX is a silica and silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency and good light resistance in formulations for paints and inks. | |
| MZY-303S | Tayca Corporation | MZY-303S is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good water repellency, transparency and UV-A shielding properties in formulations for paints and inks. |
