| CRAYVALLAC® FLOW-100 | Arkema Rheology & Specialty Additives | CRAYVALLAC® FLOW-100 is a high performance acrylic flow and levelling agent for the control of coating surface properties. It enhances substrate wetting and improves flow and levelling properties. The following benefits are of interest for powder coatings...展开 CRAYVALLAC® FLOW-100 is a high performance acrylic flow and levelling agent for the control of coating surface properties. It enhances substrate wetting and improves flow and levelling properties. The following benefits are of interest for powder coatings and coatings in general e.g. solvent-based, high solids and solvent-free. 收起 | Request Sample |
| CRAYVALLAC® FLOW-200 | Arkema Rheology & Specialty Additives | CRAYVALLAC® Flow-200 is a high performance polyester based flow and levelling agent for the control of coating surface properties. CRAYVALLAC® Flow-200 has been developed specifically to eliminate film surface defects that may occur during the film format...展开 CRAYVALLAC® Flow-200 is a high performance polyester based flow and levelling agent for the control of coating surface properties. CRAYVALLAC® Flow-200 has been developed specifically to eliminate film surface defects that may occur during the film formation. 收起 | Request Sample |
| CRAYVALLAC® FLOW-400 | Arkema Rheology & Specialty Additives | CRAYVALLAC® Flow-400 is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters and other surface defects. It is an additive based on Acrylate technology to provide excellent ageing resistance to coatings. CRAYVALLAC® Flow-400 is...展开 CRAYVALLAC® Flow-400 is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters and other surface defects. It is an additive based on Acrylate technology to provide excellent ageing resistance to coatings. CRAYVALLAC® Flow-400 is also used as an adhesion promoter additive with excellent performance. CRAYVALLAC® Flow-400 is soluble in many solvents such as ketones, aromatics, mineral spirits, esters, glycol ethers and chlorinated hydrocarbons. CRAYVALLAC® Flow-400 is easily incorporated into formulations due to its wide compatibility and good solubility in most solvents. In Powder coatings, it is recommended to introduce the CRAYVALLAC® Flow-400 by hot blend or even dry blend. The method of incorporating CRAYVALLAC® Flow-400 into coating formulation does not affect the performance of the coating as long as it is uniformly dispersed in the system. This can be achieved by thoroughly mixing it with the other paint ingredients or by master batching the product in a base resin. 收起 | Request Sample |
| CRAYVALLAC® FLOW-450 | Arkema Rheology & Specialty Additives | CRAYVALLAC® FLOW-450 is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters and other surface defects. It is an additive based on polyacrylate technology to provide excellent ageing resistance to coatings. CRAYVALLAC® FLOW-45...展开 CRAYVALLAC® FLOW-450 is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters and other surface defects. It is an additive based on polyacrylate technology to provide excellent ageing resistance to coatings. CRAYVALLAC® FLOW-450 is also used as an adhesion promoter additive with excellent performance. CRAYVALLAC® FLOW-450 can furthermore successfully substitute classical defoamers within a formulation, demonstrating combined performance in terms of leveling and defoaming. CRAYVALLAC® FLOW-450 is easily incorporated into formulations due to its wide compatibility in most solvents. It is recommended to incorporate CRAYVALLAC® FLOW-450 in the mill-base in order to get maximum efficiency in terms of air release properties. 收起 | Request Sample |
| CRAYVALLAC® FLOW-465 | Arkema Rheology & Specialty Additives | CRAYVALLAC® FLOW-465 is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters and other surface defects. It is an additive based on polyacrylate technology to provide excellent ageing resistance to coatings. CRAYVALLAC® FLOW-46...展开 CRAYVALLAC® FLOW-465 is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters and other surface defects. It is an additive based on polyacrylate technology to provide excellent ageing resistance to coatings. CRAYVALLAC® FLOW-465 is easily incorporated into formulations due to its wide compatibility in most solvents. It is recommended to incorporate CRAYVALLAC® FLOW-465 in the mill-base in order to get maximum efficiency in terms of air release properties. 收起 | Request Sample |
| CRAYVALLAC® LA-150 | Arkema Rheology & Specialty Additives | CRAYVALLAC® LA-150 is a pourable liquid rheology modifier supplied in Dimethylsulfoxide (DMSO) for post addition to medium to high polarity solvent based coatings. It shows excellent control of sedimentation combined with ease of application. | Request Sample |
| CRAYVALLAC® LA-250 | Arkema Rheology & Specialty Additives | CRAYVALLAC® LA-250 is a pourable liquid rheology modifier supplied in Dimethylsulfoxide (DMSO) for post addition to low polarity solvent based coatings. It shows excellent control of sedimentation combined with ease of application. | Request Sample |
| CRAYVALLAC® LA-377 | Arkema Rheology & Specialty Additives | CRAYVALLAC® LA-377 is a modified urea dissolved in DMSO. CRAYVALLAC® LA-377 is a pourable liquid rheology modifier for post addition to water-based coatings such as water-dilutable alkyds and acrylic emulsions. It was developed to ensure particular suitab...展开 CRAYVALLAC® LA-377 is a modified urea dissolved in DMSO. CRAYVALLAC® LA-377 is a pourable liquid rheology modifier for post addition to water-based coatings such as water-dilutable alkyds and acrylic emulsions. It was developed to ensure particular suitability for metal coating as its formula is lithium chloride-free. CRAYVALLAC® LA-377 should be added to the coating as a slow stream under low to medium shear conditions to ensure sufficient dispersion. Although efficient stirring is required to ensure homogeneity, elevated temperatures are not required for activation and the use of excessive shear should be avoided. 收起 | Request Sample |
| CRAYVALLAC® LV | Arkema Rheology & Specialty Additives | CRAYVALLAC® LV is a 100 % active and highly bio-sourced polyamide rheology modifier designed for very high solids and solvent-free systems. It features the strongest shear thinning and is therefore highly recommended to achieve very thick films. It impart...展开 CRAYVALLAC® LV is a 100 % active and highly bio-sourced polyamide rheology modifier designed for very high solids and solvent-free systems. It features the strongest shear thinning and is therefore highly recommended to achieve very thick films. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result is excellent control of sedimentation combined with ease of application. 收起 | Request Sample |
| CRAYVALLAC® MT | Arkema Rheology & Specialty Additives | CRAYVALLAC® MT is a 100 % active and highly bio-sourced modified castor derivative rheology modifier for solvent-based and solvent-free systems. CRAYVALLAC® MT is suited to coating systems based on aliphatic hydrocarbons, aromatic hydrocarbons and aromati...展开 CRAYVALLAC® MT is a 100 % active and highly bio-sourced modified castor derivative rheology modifier for solvent-based and solvent-free systems. CRAYVALLAC® MT is suited to coating systems based on aliphatic hydrocarbons, aromatic hydrocarbons and aromatic hydrocarbon/alcohol blends. It shows excellent control of sedimentation combined with ease of application. 收起 | Request Sample |
| CRAYVALLAC® Optima | Arkema Rheology & Specialty Additives | CRAYVALLAC® Optima is a 100 % active and highly bio-sourced polyamide rheology modifier offering very good recoatability for ambient curing solvent-based and solvent-free epoxy coatings. It is also recommended in top coat and direct to metal application f...展开 CRAYVALLAC® Optima is a 100 % active and highly bio-sourced polyamide rheology modifier offering very good recoatability for ambient curing solvent-based and solvent-free epoxy coatings. It is also recommended in top coat and direct to metal application for its smoother viscosity resulting in good compromise between levelling and sag resistance. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result is excellent control of sedimentation combined with ease of application. 收起 | Request Sample |
| CRAYVALLAC® PA3 BA 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 BA 20 is a HAPs-free alternative to CRAYVALLAC® PA3 X 20. This rheology modifier is composed of a pre-activated amide wax dispersed in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form for post-addition to sol...展开 CRAYVALLAC® PA3 BA 20 is a HAPs-free alternative to CRAYVALLAC® PA3 X 20. This rheology modifier is composed of a pre-activated amide wax dispersed in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings. 收起 | Request Sample |
| CRAYVALLAC® PA3 WDA 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 WDA 20 is a pre-activated amide wax supplied in a mixture of mineral spirit (D60) and alcohols. Under paste form for post-addition to solvent-based low polarity coating systems, it provides a shear-thinning rheology with thixotropic viscos...展开 CRAYVALLAC® PA3 WDA 20 is a pre-activated amide wax supplied in a mixture of mineral spirit (D60) and alcohols. Under paste form for post-addition to solvent-based low polarity coating systems, it provides a shear-thinning rheology with thixotropic viscosity recovery to coating formulations. In coating systems, its crystalline fibres form an interacting network which gives rise to the shear-thinning rheology of the final coating. It provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. Immediately following application, the coating’s viscosity undergoes a time dependent recovery as the network re-establishes itself. This time dependence is known as thixotropy and enables the final coating to attain very good levelling. 收起 | Request Sample |
| CRAYVALLAC® PA3 X 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA3 X 20 p...展开 CRAYVALLAC® PA3 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA3 X 20 provides a very simple and direct means of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. 收起 | Request Sample |
| CRAYVALLAC® PA3 XAF 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 XAF 20 is an alcohol-free pre-activated amide wax supplied in xylene. It is a rheology modifier in paste form with high efficiency (optimum sag resistance and viscosity). CRAYVALLAC® PA3 XAF 20 is supplied in the form of crystalline fibres...展开 CRAYVALLAC® PA3 XAF 20 is an alcohol-free pre-activated amide wax supplied in xylene. It is a rheology modifier in paste form with high efficiency (optimum sag resistance and viscosity). CRAYVALLAC® PA3 XAF 20 is supplied in the form of crystalline fibres. In a coating system, these fibres form an interacting network. This network gives rise to the shear thinning rheology of the final coating. This shear thinning characteristic provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. 收起 | Request Sample |
| CRAYVALLAC® PA4 BA 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA4 BA 20 is a HAPs-free (e.g. Xylene free) alternative to CRAYVALLAC® PA4 X 20. This rheology modifier is composed of a pre-activated amide wax dispersed in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form for p...展开 CRAYVALLAC® PA4 BA 20 is a HAPs-free (e.g. Xylene free) alternative to CRAYVALLAC® PA4 X 20. This rheology modifier is composed of a pre-activated amide wax dispersed in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings. CRAYVALLAC® PA4 BA 20 is especially suited to coatings demanding a higher degree of surface gloss or transparency. 收起 | Request Sample |
| CRAYVALLAC® PA4 WDA 12 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA4 WDA 12 is a pre-activated amide wax dispersed in a mixture of mineral spirit (D60) and alcohols. It is a rheology modifier in paste form for post addition to solvent-based coatings with low polarity systems. The use of CRAYVALLAC® PA4 WDA ...展开 CRAYVALLAC® PA4 WDA 12 is a pre-activated amide wax dispersed in a mixture of mineral spirit (D60) and alcohols. It is a rheology modifier in paste form for post addition to solvent-based coatings with low polarity systems. The use of CRAYVALLAC® PA4 WDA 12 provides a very simple and direct means of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. 收起 | Request Sample |
| CRAYVALLAC® PA4 X 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA4 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA4 X 20 p...展开 CRAYVALLAC® PA4 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA4 X 20 provides a very simple and direct means of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. 收起 | Request Sample |
| CRAYVALLAC® PA5 XSR 25 | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially desi...展开 CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially designed for manufacture of one-component Silyl-Terminated-Polymer systems where processing temperatures typically lie within the range 55 - 90°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. 收起 | Request Sample |
| CRAYVALLAC® PC | Arkema Rheology & Specialty Additives | CRAYVALLAC® PC is a micronised hydrogenated castor oil derivative surface enhancing additive for powder coatings based on PRIMID, hybrid and TGIC technologies. CRAYVALLAC® PC is easily incorporated using conventional pre-mixing techniques prior to extrusi...展开 CRAYVALLAC® PC is a micronised hydrogenated castor oil derivative surface enhancing additive for powder coatings based on PRIMID, hybrid and TGIC technologies. CRAYVALLAC® PC is easily incorporated using conventional pre-mixing techniques prior to extrusion. The use of CRAYVALLAC® PC leads to a substantial improvement in the appearance of the final cured powder coating. This improvement is due to CRAYVALLAC® PC enhancing the flow, levelling and degassing processes during cure. 收起 | Request Sample |
| CRAYVALLAC® PF | Arkema Rheology & Specialty Additives | CRAYVALLAC® PF is a modified micronised hydrogenated castor oil rheology modifier specially designed to facilitate the incorporation in powder form for better activation and easier handling. The activation process is the conversion of the CRAYVALLAC® PF f...展开 CRAYVALLAC® PF is a modified micronised hydrogenated castor oil rheology modifier specially designed to facilitate the incorporation in powder form for better activation and easier handling. The activation process is the conversion of the CRAYVALLAC® PF fine particles to an interacting network of fibers. It is this network that gives rise to the final system’s shear thinning rheology. This shear-thinning behavior provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. CRAYVALLAC® PF is suitable for a multitude of applications. 收起 | Request Sample |
| CRAYVALLAC® REV | Arkema Rheology & Specialty Additives | CRAYVALLAC® REV is a Polyamide rheology additive that provides excellent sag resistance and high performance in industrial paints. The bio-based CRAYVALLAC® REV enables to reduce customer constraints by improving robustness and efficiency. Furthermore, it...展开 CRAYVALLAC® REV is a Polyamide rheology additive that provides excellent sag resistance and high performance in industrial paints. The bio-based CRAYVALLAC® REV enables to reduce customer constraints by improving robustness and efficiency. Furthermore, its versatility makes it the perfect universal tool to develop standard to very high solids coatings that rely less on processing conditions and formulations types. 收起 | Request Sample |
| CRAYVALLAC® SF | Arkema Rheology & Specialty Additives | CRAYVALLAC® SF is a proprietary amide-modified hydrogenated castor oil rheology modifier with an enhanced tolerance to temperature and solvent strength suitable for a variety of different solvent-based systems e.g. aromatic hydrocarbons and aromatic hydro...展开 CRAYVALLAC® SF is a proprietary amide-modified hydrogenated castor oil rheology modifier with an enhanced tolerance to temperature and solvent strength suitable for a variety of different solvent-based systems e.g. aromatic hydrocarbons and aromatic hydrocarbon/alcohol blends. Compared to other hydrogenated castor oil based rheology modifiers, CRAYVALLAC® SF is more tolerant to strong solvents and high processing temperatures due to the presence of its unique performance enhancing amide. The activation process constitutes the conversion of the CRAYVALLAC® SF particles to an interacting network of fibre-like particles. It is this network that gives rise to the final coating’s shear thinning rheology. This shear thinning characteristic providesa very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. 收起 | Request Sample |
| CRAYVALLAC® SL | Arkema Rheology & Specialty Additives | CRAYVALLAC® SL is a high performance micronised amide wax rheology modifier designed for the high temperature manufacture of moisture curing methoxysilanes systems, where processing temperatures typically lie within the range 90 – 115°C. CRAYVALLAC® SL pa...展开 CRAYVALLAC® SL is a high performance micronised amide wax rheology modifier designed for the high temperature manufacture of moisture curing methoxysilanes systems, where processing temperatures typically lie within the range 90 – 115°C. CRAYVALLAC® SL particles are converted to an interacting network of crystalline fibres. It is this network that gives rise to the shear thinning rheology. This shear thinning characteristic provides for a low viscosity at the shear rates associated with application by extrusion, and a very high viscosity under the low shear rates experienced after application. The net result is ease of application followed by excellent sag and slump resistance. 收起 | Request Sample |
| CRAYVALLAC® SLT | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLT is a 100% active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the ra...展开 CRAYVALLAC® SLT is a 100% active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the range 30 - 80°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. 收起 | Request Sample |
| CRAYVALLAC® SLW | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially desi...展开 CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially designed for manufacture of one-component Silyl-Terminated-Polymer systems where processing temperatures typically lie within the range 55 - 90°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. 收起 | Request Sample |
| CRAYVALLAC® SLX | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLX is a 100 % active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the r...展开 CRAYVALLAC® SLX is a 100 % active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the range 60 - 90°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. 收起 | Request Sample |
| CRAYVALLAC® SUPER | Arkema Rheology & Specialty Additives | CRAYVALLAC® SUPER is a 100 % active and highly bio-sourced polyamide rheology modifier suitable for a wide range of solvent-based, high-solids and solvent-free applications. It imparts shear thinning rheology with thixotropic viscosity recovery. The net...展开 CRAYVALLAC® SUPER is a 100 % active and highly bio-sourced polyamide rheology modifier suitable for a wide range of solvent-based, high-solids and solvent-free applications. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result is excellent control of sedimentation combined with ease of application. 收起 | Request Sample |
| CRAYVALLAC® ULTRA | Arkema Rheology & Specialty Additives | CRAYVALLAC® ULTRA is a 100 % active and highly bio-sourced polyamide rheology modifier offering very good recoatability for ambient curing solvent-based epoxy coatings. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result...展开 CRAYVALLAC® ULTRA is a 100 % active and highly bio-sourced polyamide rheology modifier offering very good recoatability for ambient curing solvent-based epoxy coatings. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result is excellent control of sedimentation combined with ease of application. 收起 | Request Sample |
| CRAYVALLAC® WN-1135 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1135 is a micronised modified polypropylene wax showing ease of dispersion in solvent-based and waterborne formulations. It is used as a matting agent in a wide range of applications, meanwhile imparting a smooth, silky feel and appearance,...展开 CRAYVALLAC® WN-1135 is a micronised modified polypropylene wax showing ease of dispersion in solvent-based and waterborne formulations. It is used as a matting agent in a wide range of applications, meanwhile imparting a smooth, silky feel and appearance, enhancing slip and improving rub, abrasion and scratch resistance. 收起 | Request Sample |
| CRAYVALLAC® WN-1150 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1150 is used to control gloss between 30 – 60% for epoxy/polyester hybrid, HAA and TGIC based polyester powder coatings. It shows no effect on weather ability or physical properties. | Request Sample |
| CRAYVALLAC® WN-1265 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1265 is a micronised amide wax. In liquid coatings, CRAYVALLAC® WN-1265 is primarily used to enhance the sandability of Solvent based or Water Based Wood primers and sealers. An additional advantage to be gained in this application is the a...展开 CRAYVALLAC® WN-1265 is a micronised amide wax. In liquid coatings, CRAYVALLAC® WN-1265 is primarily used to enhance the sandability of Solvent based or Water Based Wood primers and sealers. An additional advantage to be gained in this application is the absence of bloom when used in acid cured formulations. CRAYVALLAC® WN-1265 is also an effective internal lubricant for plastic compounding. In powder coatings, CRAYVALLAC® WN-1265 improves degassing properties and allows high thickness applications of HAA cured paints, even on difficult substrates. 收起 | Request Sample |
| CRAYVALLAC® WN-1442 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1442 is an additive for use in liquid coatings to enhance surface properties such as scratch and abrasion resistance. Its fine particle size distribution is providing enhanced performance and ease of incorporation | Request Sample |
| CRAYVALLAC® WN-1495 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1495 is a very finely micronised polyethylene wax which provides the formulator with means of controlling a coating’s frictional characteristics as well as enhancing its surface properties. CRAYVALLAC® WN-1495 is suitable for use in a wide ...展开 CRAYVALLAC® WN-1495 is a very finely micronised polyethylene wax which provides the formulator with means of controlling a coating’s frictional characteristics as well as enhancing its surface properties. CRAYVALLAC® WN-1495 is suitable for use in a wide range of coating applications, and in some cases it offers the formulator additional performance benefits. 收起 | Request Sample |
| CRAYVALLAC® WN-1535 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1535 is a micronised modified polypropylene wax showing ease of dispersion especially in waterborne formulations. It is used as a matting agent in a wide range of applications, meanwhile imparting a smooth, silky feel and appearance, enhanc...展开 CRAYVALLAC® WN-1535 is a micronised modified polypropylene wax showing ease of dispersion especially in waterborne formulations. It is used as a matting agent in a wide range of applications, meanwhile imparting a smooth, silky feel and appearance, enhancing slip and improving rub, abrasion and scratch resistance. CRAYVALLAC® WN-1535 is suitable for use in a wide range of solvent-based, water-based, solvent free and powder coatings applications. 收起 | Request Sample |
| CRAYVALLAC® WN-1875 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1875 is a finely micronized polymeric material for use in a wide range of water-based and solvent-based applications, where it provides a matting and satin effect. CRAYVALLAC® WN-1875 is resistant to those solvents and chemicals commonly us...展开 CRAYVALLAC® WN-1875 is a finely micronized polymeric material for use in a wide range of water-based and solvent-based applications, where it provides a matting and satin effect. CRAYVALLAC® WN-1875 is resistant to those solvents and chemicals commonly used in the coatings industry. Heat resistance, weather resistance and light stability are most favourable with this product. 收起 | Request Sample |
| CRAYVALLAC® WN-2950 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-2950 is a very fine micronized polyethylene wax providing specific mechanical and chemical resistance and used in printing inks, and other demanding applications. CRAYVALLAC® WN-2950 imparts superior rub/mar resistance and slip properties w...展开 CRAYVALLAC® WN-2950 is a very fine micronized polyethylene wax providing specific mechanical and chemical resistance and used in printing inks, and other demanding applications. CRAYVALLAC® WN-2950 imparts superior rub/mar resistance and slip properties with minimum effect on gloss. It is a high melting point wax with high hardness, heat and solvent resistance. CRAYVALLAC® WN-2950 is particularly suited to “stir in” applications. 收起 | Request Sample |
| CRAYVALLAC® WN-3025 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-2950 is a very fine micronized polyethylene wax providing specific mechanical and chemical resistance and used in printing inks, and other demanding applications. CRAYVALLAC® WN-2950 imparts superior rub/mar resistance and slip properties w...展开 CRAYVALLAC® WN-2950 is a very fine micronized polyethylene wax providing specific mechanical and chemical resistance and used in printing inks, and other demanding applications. CRAYVALLAC® WN-2950 imparts superior rub/mar resistance and slip properties with minimum effect on gloss. It is a high melting point wax with high hardness, heat and solvent resistance. CRAYVALLAC® WN-2950 is particularly suited to “stir in” applications. 收起 | Request Sample |
| CRAYVALLAC® WS-4700 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WS-4700 is a 40% active dispersion of polyethylene wax in isopropanol. The low viscosity and high active content of this dispersion, together with freedom from dust, assist the efficiency of manufacturing processes. CRAYVALLAC® WS-4700 provide...展开 CRAYVALLAC® WS-4700 is a 40% active dispersion of polyethylene wax in isopropanol. The low viscosity and high active content of this dispersion, together with freedom from dust, assist the efficiency of manufacturing processes. CRAYVALLAC® WS-4700 provides the formulator with the means of controlling the frictional characteristics of a coating as well as enhancing its surface protection properties. 收起 | Request Sample |
| CRAYVALLAC® WW-1001 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WW-1001 is a 40% active dispersion of polyethylene wax in water. The low viscosity and high active content of this dispersion, together with freedom from dust, assist the efficiency of manufacturing processes. CRAYVALLAC® WW-1001 provides the ...展开 CRAYVALLAC® WW-1001 is a 40% active dispersion of polyethylene wax in water. The low viscosity and high active content of this dispersion, together with freedom from dust, assist the efficiency of manufacturing processes. CRAYVALLAC® WW-1001 provides the formulator with the means of controlling the frictional characteristics of a coating as well as enhancing its surface protection properties. 收起 | Request Sample |
| CRAYVALLAC® WW-9500 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WW-9500 is a 35% active dispersion of modified polypropylene wax in water.The low viscosity and high active content of this dispersion together with freedom from dust assist the efficiency of manufacturing processes. CRAYVALLAC® WW-9500 provid...展开 CRAYVALLAC® WW-9500 is a 35% active dispersion of modified polypropylene wax in water.The low viscosity and high active content of this dispersion together with freedom from dust assist the efficiency of manufacturing processes. CRAYVALLAC® WW-9500 provides the formulator with the means of controlling the frictional characteristics of a coating as well as enhancing its surface protection properties. It also retards the settlement of pigments and assists in their redispersion. 收起 | Request Sample |
| Deflame® 4216 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | Deflame® 4216是一种反应性烯烃、酮、环氧化物等。它作为防火剂用于纺织品中和电子部件例如PCB用环氧树脂中。由于它的刚性结构，即侧磷基团，该产品具有高玻璃化转变温度和热稳定性。它的毒性较低，冒烟少。Deflame® 4216适合用于纺织品和电子部件用环氧树脂。它具有白色片状表观 | |
| Deflame® 4325 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | Deflame® 4325是一种磷化氢不含卤素的防火剂，耐溶剂萃取，挥发和起霜。该白色到浅白色结晶粉末具有良好的稳定性和防火效率，适合环氧、聚酯、聚氨酯树脂。Deflame® 4325作为防火剂广泛用于半导体封装材料，作为中间体用于合成反应性防火剂，高品质环氧树脂例如PCB中取代TBBA，或用于半导体、PCB、LED等的胶黏剂 | |
| Deflame® 460A70 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | Deflame® 460A70是一种不含卤素的环氧树脂，溶于丙酮，70%固含。它可用于复合材料，刚性板和多层电子层压板。分子量分布设计以增加玻璃的浸水率并提高固化环氧树脂的交联密度。各种分子量片段和环氧树脂也为该体系在层压时提供了良好的流变性。固化后的产品具有良好的热稳定性和耐化学品性 | |
| Doublecure® 107 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 第一种NorrishΙ型光引发剂，特别开发用于有色UV固化体系。该产品一经投入市场就迅速在UV油墨和阻焊剂行业受到追捧。 | |
| Doublecure® 1130 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 基于碘鎓化合物的阳离子光引发剂，用于引发环氧化物和其他阳离子聚合材料在紫外光下的聚合。它与大多数阳离子紫外光体系相容，非常适合金属、塑料和纸张基材的薄涂和透明涂料 | |
| Doublecure® 115 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 反应性胺添加剂，通常用于代替短效胺增效剂，以增加紫外光固化涂料的固化速度 | |
| Doublecure® 1172 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 基于锍化学的新型阳离子光引发剂，当它用于引发环氧化合物和其它阳离子聚合材料在紫外光中的聚合时，检测不到苯产生。DOUBLECURE® 1172与大多数阳离子紫外光体系相容，是金属、塑料和纸张用薄涂透明涂料的理想选择 | |
| Doublecure® 1176 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 基于锍化合物的阳离子光引发剂，用于引发环氧化物和其他阳离子聚合材料在紫外光下的聚合。它与大多数阳离子紫外光体系相容，非常适合金属、塑料和纸张基材的薄涂和透明涂料 | |
| Doublecure® 1190 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 基于锍化合物的阳离子光引发剂，用于引发环氧化物和其他阳离子聚合材料在紫外光下的聚合。它与大多数阳离子紫外光体系相容，非常适合金属、塑料和纸张基材的薄涂和透明涂料 | |
| Doublecure® 1256 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 不黄变液体光引发剂，特别设计用于不饱和聚酯或厚膜丙烯酸紫外光固化涂料。它在位于374nm的最大波长处具有少量吸收，因此非常适合用于白色颜料体系 | |
| Doublecure® 173 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 液态不黄变的光引发剂，良好的溶解性使其可理想的用于制备光引发剂混合物。它是木器、金属、塑料用涂料以及紫外光固化胶粘剂的可选引发剂 | |
| Doublecure® 1819 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 光引发剂，用于不饱和树脂的紫外光固化聚合。它建议用于白色配方，光纤增强聚酯/苯乙烯体系的固化，可结合光稳定剂用于户外用清漆 | |
| Doublecure® 1819DW | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 特别适合用于有色水性聚氨酯乳液固化，PU分散清漆的日光固化。 Doublecure® 1819DW是一种二酰基磷化氢氧化物在水里的分散体。 | |
| Doublecure® 184 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 低黄变UV辐射固化体系的最佳选择。它是一种α断裂型光引发剂，兼具高光固化速度和极好的保存期限。它的不黄变和低刺激性使它非常适合用于纸张、地坪、金属、塑胶和木器用透明涂料 | |
| Doublecure® 2-ITX | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 一种理想的光敏剂，适用于有色UV涂料体系。它结合一种类似Doublecure® EPD的光催化剂，可在大多数UV场合获得满意的效果。 | |
| Doublecure® 200 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 液体不黄变的光敏剂，良好的溶解性使其可理想的用于制备光引发剂混合物。它是木器、金属、塑料用涂料以及不黄变性能至关重要的紫外光固化胶粘剂的可选引发剂 | |
| Doublecure® 225 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 反应性胺添加剂，通常用于代替短效胺增效剂，以增加紫外光固化涂料的固化速度。当DOUBLECURE® 225结合其它光引发剂，可增加固化速度，尤其是在表面，可明显观察到。其它的优点包括浅色、低粘度、改善的稳定性和低挥发性 | |
| Doublecure® 369 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 强效Norrish I型光引发剂，特别设计用于深色体系。由于其独特的聚合结构，DOUBLECURE® 3690能为配方师提供下列优点：高感光速度、低粘度液体、与颜料高相容性 | |
| Doublecure® 3959 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | Doublecure® 3959是一种高效不黄变的自由基引发剂，适合UV固化体系，含不饱和单体和预聚物。活性羟基基团可与合适的功能性不饱和树脂反应。该白色粉末尤其适合需要低气味的应用，适用于基于丙烯酸酯或不饱和聚酯树脂的水性体系。它主要用于在木材、金属、塑胶和纸张上的可紫外固化配方 | |
| Doublecure® 550 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 两种光引发剂DOUBLECURE® 184和DOUBLECURE® BP的液体混合物。用于引发化学低聚物例如各种丙烯酸酯以及单或多官能团单体的光聚合反应。由于液态性质，使其成为纸张、地板、金属、塑料、木器透明涂料尤其是水性紫外光固化涂料体系的理想选择 | |
| Doublecure® 575 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | Doublecure® 575是一种液态、低气味、低黄变的光引发剂，是金属、塑料、木器用 UV 涂料的理想选择。Doublecure 575 可以应用于印刷油墨（丝印、胶印）、木器漆、汽车原厂漆、修补漆、塑料底涂漆、UV 胶、条形码等各方面。 | |
| Doublecure® 645 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 一种特殊的叔胺丙烯酸酯单体，特别适合用于纸张和木板上的高光泽UV固化清漆。该产品结合苯甲酮后，可提供非常快的表面固化速度，克服缺氧问题 | |
| Doublecure® 73W | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 水溶性不黄变光引发剂。它的良好的溶解力和水溶性，使其非常适合用于制备光引发剂混合物或水性紫外光固化体系。它是木器、金属和塑料用涂料以及紫外光固化胶粘剂的可选引发剂 | |
| Doublecure® 784 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | Doublecure® 369 is a highly efficient Free Radical Type I solid photoinitiator for UV-polymerization of chemically prepolymers in combination with mono-or multifunctional monomers. This pale yellow powder may be used after adequate testing alone or in com...展开 Doublecure® 369 is a highly efficient Free Radical Type I solid photoinitiator for UV-polymerization of chemically prepolymers in combination with mono-or multifunctional monomers. This pale yellow powder may be used after adequate testing alone or in combination with suitable coinitiators, e.g., Doublecure® 184, for UV curable inks and varnishes for applications on paper, metal and plastic materials. Its high absorptivity makes it especially suitable for pigmented UV-curable systems, photo resists and printing plates. 收起 | |
| Doublecure® BDK | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 高性能光引发剂，适合固有黄变不重要的应用场合。高感光速度结合改善的保存期限使其成为许多应用，包括木器、金属、塑料和光刻胶干膜用涂料，的可选引发剂 | |
| Doublecure® BMS | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 高性能光引发剂，可结合DOUBLECURE® EPD光催化剂，用于紫外光固化的涂料配方。它的白色外观和在UVB区的强吸收使它适用于白色或有色紫外光涂料。相比其它具有相同吸收区域的光敏剂，低气味和良好的单体溶解性是它的两大优势 | |
| Doublecure® BP | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 一种高效的光引发剂，经UV照射，可与胺增效剂如Doublecure ® 115反应产生自由基，该自由基可引发UV辐射固化体系发生聚合。 | |
| Doublecure® CA | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 固体不黄变光引发剂增效剂。它可提供快速表面固化性能，杰出的表面硬度和无气味特征 | |
| Doublecure® CQ | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 固体不黄变光引发剂。它可提供快速固化性能 | |
| Doublecure® DETX | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 最广泛应用的光敏剂，适用于有色UV涂料体系。它结合光敏催化剂如DOUBLECURE® EPD，可在大多数UV应用场合获得满意结果。 | |
| Doublecure® EMK | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 该产品既是一种芳族酮，又是一种叔胺。既能用作光敏剂，又能用作胺增效剂，可作为独立完成的引发体系。Doublecure® ® EMK能强力吸收处于350-400nm区域的紫外线，很适合用于有色和黑色UV涂料。 | |
| Doublecure® EPD | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 一种高效胺增效剂，常用作紫外线照射固化涂料的光敏剂。该光敏剂常结合其它产品使用，包括Doublecure ® ITX和MP-L。 | |
| Doublecure® IPK | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 一种高效的光敏剂，常用作紫外线照射固化涂料的光引发剂。该光引发剂常用于结合其它产品使用，如DOUBLECURE® 107, OMB and MP-L. | |
| Doublecure® ITX | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 最广泛应用的光敏剂，适用于有色UV涂料体系。它结合光敏催化剂如Doublecure ® EPD，可在大多数UV应用场合获得满意结果。 | |
| Doublecure® LBP | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 一种高效的液态光引发剂，经UV照射后与胺增效剂如DOUBLECURE® 115, 225反应产生自由基，该自由基可引发UV辐射固化体系发生聚合。 | |
| Doublecure® OMB | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 一种高效的光引发剂，特别开发用于要求无气味和不黄变的应用场合，如食品包装涂料。该产品与如Doublecure ® 115这种光催化剂结合效果可比拟其它的苯甲酮类引发剂。 | |
| Doublecure® OPD | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 一种高效胺增效剂，常用作紫外线照射固化涂料的光敏剂。该光敏剂常结合其它产品使用，包括Doublecure ® ITX和EMK。 | |
| Doublecure® PI-172 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 高性能光引发剂，可用于丙烯酸酯单体、甲基丙烯酸酯单体、丙烯酸、丙烯腈、苯乙烯单体和丁二烯 | |
| Doublecure® TPO | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 可用于有色体系，不牺牲反应活性。因其空前的速度和不黄变性能，该产品是厚膜和白色涂料的最佳推荐。 | |
| Doublecure® TPO-L | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 位于379nm最大波长处有少量吸收，可用于有色体系，且不会影响反应活性。同时，因其杰出的反应速度和不黄变性能，该产品推荐用于厚膜和白色涂料。 | |
| DOUBLEMER® 013 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | DOUBLEMER® 013是一种丙烯酸单体，优点是低粘度、低皮肤刺激指数（PII=0.5），高反应活性和良好的耐热性。作为助剂用于紫外光(UV)或电子束(EB)固化的配方中，DOUBLEMER® 013 具有出色的基材润湿性和流平性能、低粘度和良好的配方稳定性。由于它具有丙烯酸官能团，固化后，该产品可通过光引发自由基聚合渗透到基材主体中。 由于它的化学结构，它易溶于水。它可在大部分配方以及水溶性UV应用中替代NVP。含DOUBLEMER® 013配制的UV/EB固化产品可作为反应性溶剂或胶粘剂...展开 DOUBLEMER® 013是一种丙烯酸单体，优点是低粘度、低皮肤刺激指数（PII=0.5），高反应活性和良好的耐热性。作为助剂用于紫外光(UV)或电子束(EB)固化的配方中，DOUBLEMER® 013 具有出色的基材润湿性和流平性能、低粘度和良好的配方稳定性。由于它具有丙烯酸官能团，固化后，该产品可通过光引发自由基聚合渗透到基材主体中。 由于它的化学结构，它易溶于水。它可在大部分配方以及水溶性UV应用中替代NVP。含DOUBLEMER® 013配制的UV/EB固化产品可作为反应性溶剂或胶粘剂用于水性UV配方。该产品是一种透明到黄色的液体 收起 | |
| DOUBLEMER® 989 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | DOUBLEMER® 989 is a solid, long-chain polyester which contributes to wetting and increases viscosity due to high molecular weight. This product is an effective thickener and can also decrease shrinkage during UV curing, which also help for adhesion. | |
| Doubletex 127 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 作为一种荧光增白剂，Chitex 127可吸收太阳光或人造光中的不可见紫外光线，并将其转变为可见的蓝紫光。因此，相比未经处理的聚合物呈现浅黄色，经Chitex 127处理的聚合物显得雪白。 | |
| Doubletex AP-20 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | Doubletex AP-20 is a liquid UV absorber designed specifically for the protection of polyester and disperse dyes from the damage of UV light. Doubletex AP-20 is water disperse, has better polyester compatibility, is less volatile. | |
| Doubletex CBS-1 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | Doubletex CBS -1是二苯乙烯基联苯类的水溶性光学增白剂，适用于合成洗涤剂、香皂和肥皂的光学增白。它提供了极好的耐漂白性，具有极高的次氯酸钠稳定性。本产品具有卓越的美白性能和出色的耐光性。它可以用于氯/氧漂白、洗涤和匀染。 | |
| Doubletex DET | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | Doubletex DET absorbs invisible ultraviolet light in the sunlight or artificial light and converts them to visible blue-violet light. This product is a high molecular weight optical brightener of the distyryl biphenyl class, suitable for the optical brigh...展开 Doubletex DET absorbs invisible ultraviolet light in the sunlight or artificial light and converts them to visible blue-violet light. This product is a high molecular weight optical brightener of the distyryl biphenyl class, suitable for the optical brightening of synthetic detergents, scented soap and soaps. 收起 | |
| Doubletex DET-P | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | Doubletex DET-P absorbs invisible ultraviolet light in the sunlight or artificial light and converts them to visible blue-violet light. This optical brightener is a high molecular weight optical brightener of the distyryl biphenyl class, suitable for the ...展开 Doubletex DET-P absorbs invisible ultraviolet light in the sunlight or artificial light and converts them to visible blue-violet light. This optical brightener is a high molecular weight optical brightener of the distyryl biphenyl class, suitable for the optical brightening of synthetic detergents, scented soap and soaps. 收起 | |
| Doubletex ER | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | Doubletex ER absorbs invisible ultraviolet light in the sunlight or artificial light and converts them to visible blue-violet light. Accordingly, In case of treating with this product, the polyester fiber will have snow-white outlook compared to pale yell...展开 Doubletex ER absorbs invisible ultraviolet light in the sunlight or artificial light and converts them to visible blue-violet light. Accordingly, In case of treating with this product, the polyester fiber will have snow-white outlook compared to pale yellow without treatment. Characterized by its chemical resistance, thermal resistance and excellent light stability, Doubletex ER can be used to enhance whiteness of polyester products. 收起 | |
| Doubletex FP | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | Doubletex FP absorbs invisible ultraviolet light in the sunlight or artificial light and converts them to visible blue-violet light. Accordingly, In case of treating with this product, the polymers will have snow-white outlook compared to pale yellow with...展开 Doubletex FP absorbs invisible ultraviolet light in the sunlight or artificial light and converts them to visible blue-violet light. Accordingly, In case of treating with this product, the polymers will have snow-white outlook compared to pale yellow without treatment. 收起 | |
| Doubletex OB | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 苯并恶唑荧光增白剂，推荐用于大多数涂料和塑料工业以提高白度 | |
| Doubletex OB-1 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 双苯并恶唑荧光增白剂，推荐用于大多数涂料和塑料工业以提高亮度和白度 | |
| Doubletex OB-90 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | Doubletex OB-90 is an optical brightener dispersed in polyol. It absorbs invisible ultraviolet light in the sunlight or artificial light and converts them to visible blue-violet light. With the treatment of Doubletex OB-90, the polymer is obviously whiter...展开 Doubletex OB-90 is an optical brightener dispersed in polyol. It absorbs invisible ultraviolet light in the sunlight or artificial light and converts them to visible blue-violet light. With the treatment of Doubletex OB-90, the polymer is obviously whiter. It is designed for applying to the polyether polyol based PU foam. 收起 | |
| Ecodis™ 40 | Arkema Rheology & Specialty Additives | Ecodis™ 40 is a sodium neutralized polyacrylate dispersing agent for water-based systems. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC (Pigment Volume Concentration). ...展开 Ecodis™ 40 is a sodium neutralized polyacrylate dispersing agent for water-based systems. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC (Pigment Volume Concentration). Very versatile and suitable for titanium dixide, Kaolin and calcium cabonates. Besides dispersion paints, the main applications are in adhesives and sealants. 收起 | Request Sample |
| Ecodis™ 80 | Arkema Rheology & Specialty Additives | Ecodis™ 80 is an ammonium neutralized polyacrylate dispersing agent for water-based systems. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC (Pigment Volume Concentration...展开 Ecodis™ 80 is an ammonium neutralized polyacrylate dispersing agent for water-based systems. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC (Pigment Volume Concentration). Very versatile and suitable for titanium dixide, Kaolin and calcium cabonates. Besides dispersion paints, the main applications for Ecodis™ 80 are in adhesives and wall paper pastes. 收起 | Request Sample |
| Ecodis™ C 30 | Arkema Rheology & Specialty Additives | Ecodis™ C 30 has been especially developped as a lighter colored version of Ecodis™ P 30 with limited color evolution upon storage. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to...展开 Ecodis™ C 30 has been especially developped as a lighter colored version of Ecodis™ P 30 with limited color evolution upon storage. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC. 收起 | Request Sample |
| Ecodis™ N | Arkema Rheology & Specialty Additives | Ecodis™ N is a cost effective dispersant recommended for use in matt dispersion paints. It contributes to shorten the time needed for a proper incorporation of usual fillers and pigments (calcium carbonate, titanium dioxide) even when a high concentration...展开 Ecodis™ N is a cost effective dispersant recommended for use in matt dispersion paints. It contributes to shorten the time needed for a proper incorporation of usual fillers and pigments (calcium carbonate, titanium dioxide) even when a high concentration in solids is required. Ecodis™ N also helps to ensure long term viscosity stability to dispersion paints showing a high solids content and/or a high PVC (pigment volumic concentration). 收起 | Request Sample |
| Ecodis™ NP | Arkema Rheology & Specialty Additives | Ecodis™ NP is designed to disperse and stabilize a wide range of fillers, extenders and inorganic pigments. It enables to achieve mill bases with a high solids content and simultaneously a low viscosity using the most common stirrers or deflocculating too...展开 Ecodis™ NP is designed to disperse and stabilize a wide range of fillers, extenders and inorganic pigments. It enables to achieve mill bases with a high solids content and simultaneously a low viscosity using the most common stirrers or deflocculating tools. Ecodis™ NP is particularly adapted for the dispersion of fine calcium carbonates, clays and high value pigments such at titanium dioxide across a wide range of water based formulations. It ensures a very good storage stability even to formulations stored a long time at higher temperature, which is not the case of inorganic additives such as phosphate based dispersants. Ecodis™ NP contributes to reduce formulation costs thanks to its 收起 | Request Sample |
| Ecodis™ P 30 | Arkema Rheology & Specialty Additives | Ecodis™ P 30 is a sodium neutralized polyacrylate dispersing agent for water-based systems. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC (Pigment Volume Concentration)...展开 Ecodis™ P 30 is a sodium neutralized polyacrylate dispersing agent for water-based systems. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC (Pigment Volume Concentration). Very versatile and suitable for titanium dixide, Kaolin and calcium cabonates. 收起 | Request Sample |
| Ecodis™ P 30 MB | Arkema Rheology & Specialty Additives | Ecodis™ P 30 MB is the Mass Balance version of the Ecodis™ P 30 with a Bio-attributed content of 100%. It allows a significant reduction of the product carbon footprint compared to its fossil version. Ecodis™ P 30 MB achieves exactly the same performance ...展开 Ecodis™ P 30 MB is the Mass Balance version of the Ecodis™ P 30 with a Bio-attributed content of 100%. It allows a significant reduction of the product carbon footprint compared to its fossil version. Ecodis™ P 30 MB achieves exactly the same performance as the Ecodis™ P 30 and can be readily used and implemented as a direct drop-in. 收起 | Request Sample |
