| Accelerator 2950 | Huntsman Advanced Materials 亨斯迈先进材料 | 当与多胺、聚酰胺及其加成物共用时，Accelerator 2950 固化剂是一种有效的促进剂和共反应固化剂。它可用于固化液体环氧树脂，例如用于无溶剂涂料及地坪体系中的 Araldite® GY 9708-3 树脂、Araldite® PY 302-2 树脂。它也可以用于固化固体环氧树脂或溶剂型固体环氧，如用于船舶维护的溶剂型 Araldite® GZ 7071 X 75 树脂。当其在主剂中用量为1-3%时，Accelerator 2950固化剂也是聚氨酯体系有效的促进剂及共反应固化剂。 | |
| ACRIBEN RF 450 | Benasedo | ACRIBEN RF 450 is a low hydroxyl content binder suitable to be crosslinked both with aliphatic and aromatic isocyanates, when producing enamels for metals or for plastic substrates, to be cured at room temperature or in the oven. | |
| ACRIBEN SA 338 | Benasedo | ACRIBEN SA 338 is a self crosslinking acrylic polymer endowed with very good transparency, good chemical resistance, and non-yellowing properties. It is suitable to formulate fast drying clear and pigmented water based top-coats for furniture. | |
| ACRIBEN SA 437 | Benasedo | ACRIBEN SA 437 is a self crosslinking acrylic polymer. It is suitable to formulate fast drying clear and pigmented water based sealers for furniture. | |
| ACRIBEN SA 5302 | Benasedo | ACRIBEN SA 5302 is a self crosslinking acrylic polymer endowed with high blocking resistance, good early water resistance, good alkaline resistance, very good transparency, and non yellowing properties. It is suitable to formulate clear and pigmented fast...展开 ACRIBEN SA 5302 is a self crosslinking acrylic polymer endowed with high blocking resistance, good early water resistance, good alkaline resistance, very good transparency, and non yellowing properties. It is suitable to formulate clear and pigmented fast drying and fast blocking resistant coatings for Joinery, suitable both for interior and exterior applications. 收起 | |
| Ara®Cool 1034 XW 90 | Huntsman Advanced Materials 亨斯迈先进材料 | Ara®Cool 1034 XW 90是改性曼尼期碱类固化剂。它在低温下有极其长的可操作时间，以及显著的反应活性。它有非常低的VOC（<10%溶剂）。在0-5℃的低温下，漆膜硬度增长显著。在喷砂钢板上具有优异的柔韧性，附着力和防腐性。无需熟化即可消除漆膜泛白。与Accelerator 2950配合使用时，可获得显著的催化效果。 | |
| Ara®Cool 1047 W80 | Huntsman Advanced Materials 亨斯迈先进材料 | Ara®Cool 1047 W80 is a special hardener for low temperature cure on metallic surfaces. It can be combines with liquid, semi-solid, or solid epoxy resins in solution for solvent-containing, ambient-curing high-performance coatings for metals or concrete. T...展开 Ara®Cool 1047 W80 is a special hardener for low temperature cure on metallic surfaces. It can be combines with liquid, semi-solid, or solid epoxy resins in solution for solvent-containing, ambient-curing high-performance coatings for metals or concrete. This product imparts good hardness, outstanding surface appearance, recoatability, flexibility, and adhesion. 收起 | |
| Ara®Cool 3077 | Huntsman Advanced Materials 亨斯迈先进材料 | AraCool 3077是一种不含壬基酚和苯甲醇的胺类快速固化剂。可单独使用，或与其它Aradur固化剂配合使用。可用于替换Aradur 3369和Aradur 14（含SVHC：被高度关注的物质）。配制的涂料有以下特点：较好的机械性能；很高的反应活性；在低温下具有好的漆膜外观；不含双酚A，不含苯酚，不含壬基酚或烷基酚；不含苯甲醇（低排放固化剂）。 | |
| Aradur® 340 Waterborne Epoxy Hardener | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur®340水性环氧固化剂乳化液体环氧树脂，无需预乳化，即可制备水性高固含，常温固化涂料，适用于各种工业应用。另外，也可以结合Aradur®340水性环氧固化剂和环氧树脂乳液使用。 | |
| Aradur® 36 Epoxy Curing Agent | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur® 36是一款水性环氧固化剂，可以与液体环氧树脂一起使用，例如Araldite GY9708-3、GY 776，也可以与环氧乳液一起使用，例如PZ 33757/67，应用于矿物及金属基材。当Aradur® 36与丙烯酸改性环氧搭配使用时，适用于较高耐紫外要求的面漆。 Aradur® 36与液体环氧乳液搭配还适用于环氧混凝土水泥。 | |
| Aradur® 38-1 Epoxy Curing Agent | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur® 38-1 Epoxy Curing Agent is a formulated polyamine adduct, dissolved in water. Used with liquid epoxy resins such as Araldite® GY 776 Resin, or the emulsion PZ 33757/67, Aradur® 38-1 Epoxy Curing Agent is suitable for the formulation of water-dilut...展开 Aradur® 38-1 Epoxy Curing Agent is a formulated polyamine adduct, dissolved in water. Used with liquid epoxy resins such as Araldite® GY 776 Resin, or the emulsion PZ 33757/67, Aradur® 38-1 Epoxy Curing Agent is suitable for the formulation of water-dilutable coatings for application to mineral and metallic substrates. It is particularly suitable for solvent-free dispersion coatings with a high solids content. 收起 | |
| Aradur® 3805 Waterborne Epoxy Curing Agent | Huntsman Advanced Materials 亨斯迈先进材料 | 爱牢固® 3805 环氧固化剂是一种水性胺类固化剂，专为配制双组份室温及加热固化涂料而设计。它与改性及未改性液态环氧树脂 （如爱牢达® GY 9513 环氧树脂及爱牢达® GY9708-3 环氧树脂）均具有相容性。 | |
| Aradur® 39 Epoxy Curing Agent | Huntsman Advanced Materials 亨斯迈先进材料 | 爱牢固® 39 环氧固化剂是一种专为不含挥发性有机化合物（VOC）的双组份、室温固化涂料而设计的水性胺类固化剂。产品为50%固含量的水溶液（按供应形态），不含有机溶剂。该产品可以被水稀释至30%固量（重量），但可能变得浑浊。爱牢固 39 环氧固化剂不适于和固体树脂分散液共用，因为浇注膜不能充分聚结。与液体环氧树脂共用时，可形成零VOC、快速干燥、具有水汽穿透性能（呼吸性能）及粘接性的膜。 | |
| Aradur® 3951 | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur® 3951是一款多官能度聚酰胺类固化剂，主要用于水可稀释型环氧树脂系统。Aradur® 3951是针对双组分金属防腐底漆配方而开发，用于金属富锌底漆以及底面一体涂料，应用范围涉及普通工业、船舶以及集装箱。当其与LPY15011、Araldite® PZ 3961-1等固体环氧分散体配合使用时，可以获得以下特点：低VOC含量、快速干燥、7小时的适用期以及优异的防腐能力。Aradur® 3951按照合适方法与锌粉配合后，可以稳定抑制氢气的产生。 | |
| Aradur® 3984 Epoxy Curing Agent | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur® 3984 环氧固化剂是一支脂肪胺改性的水性固化剂，用于配制双组份室温固化或加热固化的涂料配方。 该产品不含有机溶剂，以 80%的水溶液形式供应。该产品可用水稀释，但当稀释至固含量低于 35%时会形成乳状液。 | |
| Aradur® 3985 Epoxy Curing Agent | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur® 3985环氧固化剂供应方式是55％（重量比）固体在水中，不含有机溶剂或醋酸。该固化剂专为零VOC水性环氧底漆、密封剂、涂料、地坪漆等配方设计。 Aradur® 3985环氧固化剂与改性和未改性环氧树脂相容。基于Aradur® 3985环氧树脂固化剂的配方体系的使用寿命有“可见终点”（凝胶化）。它也可以作为改性剂用于水性固化剂，不会提供使用寿命“可见终点”。 | |
| Aradur® 3986 Epoxy Curing Agent | Huntsman Advanced Materials 亨斯迈先进材料 | 爱牢固®3986环氧固化剂是一种胺类固化剂，专门用于配制水可稀释环氧树脂体系。该产品不含挥发性胺类及溶剂，专为配制抗腐蚀底漆（例如，配合水性环氧树脂使用，如爱牢达® PZ 3961-1环氧树脂）及其它水性涂料而开发。爱牢固3986 环氧固化剂具有可见使用期结束的特性（通过粘度上升监测），并能提供快速固化、短表干时间、长操作时间等优势，适用于改性及未改性液体环氧树脂。 | |
| Aradur® 3987 | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur® 3987 is a modified polyamine adduct dissolved in water. It is distinguished by high reactivity, short curing times, high chemical resistance, and high thermal resistance. This product can be used with liquid epoxy resins like Araldite® GY 776, liq...展开 Aradur® 3987 is a modified polyamine adduct dissolved in water. It is distinguished by high reactivity, short curing times, high chemical resistance, and high thermal resistance. This product can be used with liquid epoxy resins like Araldite® GY 776, liquid resin emulsions like Araldite® PZ 33757-67, or with solid type 1 resin dispersions like Araldite® PZ 3961-1 for the formulation of water-based coatings and layers onto mineral and metallic substrates. 收起 | |
| Aradur® 450 Hardener | Huntsman Advanced Materials 亨斯迈先进材料 | 爱牢固® 450 固化剂是一种低粘度固化剂，专为高湿度或湿环境应用而设计。爱牢固 450 固化剂可与液态双酚A和/或双酚F环氧树脂配合使用，能够为湿混凝土基材提供最佳性能。 | |
| Aradur® LME 11061 | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur® LME 11061 is an aliphatic polyamine adduct (60% solids) in solution (xylene/butanol, 3/1). It offers tack-free films without pre-reaction, outstanding adhesion to metals, concrete and wood, and high flexibility. This product is recommended for sol...展开 Aradur® LME 11061 is an aliphatic polyamine adduct (60% solids) in solution (xylene/butanol, 3/1). It offers tack-free films without pre-reaction, outstanding adhesion to metals, concrete and wood, and high flexibility. This product is recommended for solvent-containing, ambient-curing high-performance coatings for metals or concrete. 收起 | |
| Aradur® LME 11134 | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur® LME 11134 is a new generation polyamidoamine hardener in solution (90% solid). It offers good surface properties, outstanding adhesion to metals, and high flexibility of the cured films. This product is recommended for solvent-containing, ambient-...展开 Aradur® LME 11134 is a new generation polyamidoamine hardener in solution (90% solid). It offers good surface properties, outstanding adhesion to metals, and high flexibility of the cured films. This product is recommended for solvent-containing, ambient-curing high-performance coatings for metals or concrete. It can also be used for anti-corrosion coatings. 收起 | |
| Aradur® LME 11147 | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur® LME 11147 is an isolated polyamine adduct (80% solid) in solution. It offers good surface properties, tack-free films, outstanding adhesion, high flexibility, and excellent chemical resistance. This product is recommended for solvent-containing, a...展开 Aradur® LME 11147 is an isolated polyamine adduct (80% solid) in solution. It offers good surface properties, tack-free films, outstanding adhesion, high flexibility, and excellent chemical resistance. This product is recommended for solvent-containing, ambient-curing high-performance coatings for metals or concrete. It can also be used for anti-corrosion coatings. 收起 | |
| Araldite® ECN 1400 Epoxy Resin | Huntsman Advanced Materials 亨斯迈先进材料 | 爱牢达®ECN 1400环氧树脂是一种稳定的，不发泡的高性能水性环氧甲酚酚醛树脂乳液。相比常规的双官能双酚A环氧树脂，环氧甲酚酚醛（ECN）树脂具有多个环氧官能团。 ECN树脂中的环氧官能度越高，能提供的交联密度也越高，这意味着更高的耐温性能，改进的耐化学品性能和比传统环氧树脂更好的附着力性能。 ECN树脂可以单独使用或结合常规环氧树脂使用，增强后者的性能。 ECN树脂可以均聚或与脂族族或芳香族胺，聚酰胺胺或者酸酐固化。它们也可以与羧基官能团聚酯和丙烯酸类树脂交联。 | |
| Araldite® PZ 323 Epoxy Resin | Huntsman Advanced Materials 亨斯迈先进材料 | 爱牢达®PZ 323环氧树脂是一种含水75％（重量比），环氧酚醛树脂的固体乳液。结合水性聚酰胺乳液，Aradur®340环氧树脂固化剂，Araldite PZ 323环氧树脂可配制不含有机溶剂和中和酸的水性体系。 | |
| Araldite® PZ 33757/67 | Huntsman Advanced Materials 亨斯迈先进材料 | Araldite® PZ 33757/67 is an emulsified, crystallization-resistant epoxy resin. Combined with virtually any water-dilutable hardener as a cross-linking agent, Araldite® PZ 33757-67 is a suitable epoxy resin component for surface technologies and adhesives ...展开 Araldite® PZ 33757/67 is an emulsified, crystallization-resistant epoxy resin. Combined with virtually any water-dilutable hardener as a cross-linking agent, Araldite® PZ 33757-67 is a suitable epoxy resin component for surface technologies and adhesives which can be diluted with water, or a suitable reactive component in epoxy cement mortars. This product has excellent compatibility with virtually all water-based hardeners. The end properties of such systems depend particularly on the choice of hardeners and additives used. 收起 | |
| Araldite® PZ 3961-1 Epoxy Resin | Huntsman Advanced Materials 亨斯迈先进材料 | 爱牢达®PZ 3961-1环氧树脂是一个“1型”固体环氧树脂乳液，它具有良好的综合性能，可用于金属或混凝土上的自干和烘干固化涂料。基于该乳液制成的金属涂料具有快速干燥时间，良好的附着力，柔韧性和耐腐蚀性。它可与各种爱牢固®水性环氧固化剂结合，配制成含低挥发性有机化合物（VOC）含量和具有广泛终端性能的涂料。 | |
| Araldite® PZ 3963 | Huntsman Advanced Materials 亨斯迈先进材料 | 爱牢达® PZ 3963 是一种可用水稀释的双酚 A 型环氧树脂。基于此产品的涂料产品，在配套Aradur 38-1 固化剂使用时，具有很好的加工性和施工性。 | |
| BENALAC 5660 | Benasedo | BENALAC 5660 is an air-dryng long-oil alkyd resin specially designed for “off-set inks”. It is endowed with good setting and drying characteristics, excellent wetting power, colour development and scuff resistance, flow and non- yellowing properties. | |
| BENALAC UR 81 | Benasedo | BENALAC UR 81 is a solventless aromatic urethane modified oil endowed with fast air drying properties, hardness and gloss. It finds applications as a vehicle in “off set“ inks by reducing the tack-free time and improving levelling and rub test resistance....展开 BENALAC UR 81 is a solventless aromatic urethane modified oil endowed with fast air drying properties, hardness and gloss. It finds applications as a vehicle in “off set“ inks by reducing the tack-free time and improving levelling and rub test resistance. Due to its excellent pigments wetting properties is particularly suitable as grinding vehicle. It is also suitable for interior and exterior clear varnishes and for wood stains in compliance with CE 2004 – 42 requirements for the VOC reduction. 收起 | |
| Benasol 1804 | Benasedo | Benasol 1804 is a Linseed - Tung Phenolic oil, with a 68% oil content. It contains 70% solids, Z1-Z2 visc. [G.H], 6-12 A.V. solids, and a 9 color [G.H.] max. It is used in anticorrosive primers, enamels and clear finishes with excellent resistance to mari...展开 Benasol 1804 is a Linseed - Tung Phenolic oil, with a 68% oil content. It contains 70% solids, Z1-Z2 visc. [G.H], 6-12 A.V. solids, and a 9 color [G.H.] max. It is used in anticorrosive primers, enamels and clear finishes with excellent resistance to marine corrosion. 收起 | |
| BENASOL 4377 | Benasedo | BENASOL 4377 is a low viscosity, plasticizing, non yellowing alkyd resin suitable to produce nitrocellulose wood lacquers, endowed with very fast solvent release, high build-up flow, gloss and lifting resistance. | |
| Benasol 4V | Benasedo | Benasol 4V is a very fast air drying alkyd resin phenolic modified having good through dry. It is especially recommended for rust-inhibitive metal and nitrocellulose non lifting primers, fast air–drying enamels for farm and industrial equipment. | |
| Benasol 5097 in White Spirit | Benasedo | Benasol 5097 in White Spirit is used in quick air-drying primers and enamels with excellent chemical and outdoor resistance. It is made from Linseed - Tung Phenolic oil and has an oil content of 42%. This product contains 50% solids, a viscosity [G.H.] of...展开 Benasol 5097 in White Spirit is used in quick air-drying primers and enamels with excellent chemical and outdoor resistance. It is made from Linseed - Tung Phenolic oil and has an oil content of 42%. This product contains 50% solids, a viscosity [G.H.] of X-Z, an A.V. solids amount of 6-15, and a color [G.H] max. of 9. Its application is for air. 收起 | |
| Benasol 5097 in Xylene | Benasedo | Benasol 5097 in Xylene is used in quick air-drying primers and enamels with excellent chemical and outdoor resistance. This product has an oil content of 42%, a solids amount of 50%, an A.V. solids amount of 6-15, and a viscosity [G.H.] of U-W. Its applic...展开 Benasol 5097 in Xylene is used in quick air-drying primers and enamels with excellent chemical and outdoor resistance. This product has an oil content of 42%, a solids amount of 50%, an A.V. solids amount of 6-15, and a viscosity [G.H.] of U-W. Its application is for air. 收起 | |
| BENASOL A 240 | Benasedo | BENASOL A 240 is a very fast curing binder suitable for two pack wood lacquers, sealers and top coats, where it shows good sandability hardness and filling properties. It has excellent lifting resistance and good compatibility with nitrocellulose. | |
| Benasol AS 280 | Benasedo | Benasol AS 280 is used in fast air-drying and low-bake enamels with excellent chemical resistance. It is made from soya oil and has a 28% oil content. It contains 60% solids, has a viscosity [G.H.] of Y-Z1, an A.V. solids amount of 6-15, and a colour [G.H...展开 Benasol AS 280 is used in fast air-drying and low-bake enamels with excellent chemical resistance. It is made from soya oil and has a 28% oil content. It contains 60% solids, has a viscosity [G.H.] of Y-Z1, an A.V. solids amount of 6-15, and a colour [G.H.] maximum of 5. This product has applications for air, bake, nitro and catalyze. 收起 | |
| BENASOL AS 308 in XYLENE | Benasedo | BENASOL AS 308 in XYLENE is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in combination with chlor...展开 BENASOL AS 308 in XYLENE is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in combination with chlorinated rubber, for farm machinery enamels, when sudden outdoor exposure is required. 收起 | |
| BENASOL AS 308 in XYLENE /WHITE SPIRIT (30/15) | Benasedo | BENASOL AS 308 in XYLENE /WHITE SPIRIT (30/15) is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in ...展开 BENASOL AS 308 in XYLENE /WHITE SPIRIT (30/15) is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in combination with chlorinated rubber, for farm machinery enamels, when sudden outdoor exposure is required. 收起 | |
| BENASOL AS 3716 | Benasedo | BENASOL AS 3716 is a non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce high-solids enamels for building and industrial applications, also combining with chlorinated rubber...展开 BENASOL AS 3716 is a non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce high-solids enamels for building and industrial applications, also combining with chlorinated rubber, for farm machinery enamels, when sudden outdoor exposure is required. 收起 | |
| Benasol AS 379 | Benasedo | Benasol AS 379 is used in fast air-drying white and coloured enamels for industrial applications. It is made from special fatty acids with 43% oil content and 60% solids content. This product has a viscosity [G.H.] of Z1-Z2, an A.V. solids amount of 6-12,...展开 Benasol AS 379 is used in fast air-drying white and coloured enamels for industrial applications. It is made from special fatty acids with 43% oil content and 60% solids content. This product has a viscosity [G.H.] of Z1-Z2, an A.V. solids amount of 6-12, and a color [G.H.] maximum of 5. It has application for air. 收起 | |
| BENASOL AS 452 | Benasedo | BENASOL AS 452 is an air-drying low-viscosity, non-yellowing alkyd resin especially modified so to guarantee very good wetting properties with pigments, fillers and wide compatibility with various binder types used in different formulations. | |
| BENASOL AS 453 | Benasedo | BENASOL AS 453 is an air-drying low-viscosity, non-yellowing alkyd resin especially modified so to guarantee very good wetting properties with pigments, fillers and wide compatibility with various binder types used in different formulations. | |
| Benasol B1 | Benasedo | Benasol B1 is used in urethane two-component mat finishes and sealers with high reactivity and easy sandability, and it has nitro and catalyze applications. This product contains vegetable fatty acids, with 30% oil content and a 50% solids amount. It has ...展开 Benasol B1 is used in urethane two-component mat finishes and sealers with high reactivity and easy sandability, and it has nitro and catalyze applications. This product contains vegetable fatty acids, with 30% oil content and a 50% solids amount. It has a viscosity [G.H.] of X-Y, an A.V. solids amount of 6-15, a color [G.H.] max. of 5, and an OH solids of 2.6-2.8%. 收起 | |
| Benasol C 300 | Benasedo | Benasol C 300 is used in non-yellowing baking enamels, polyurethane finishes and nitrocellulose lacquers. It contains coconut fatty acids, with a 33% oil content. This product has a 60% solids content, a viscosity [G.H.] of Z1-Z2, an A.V. solids amount of...展开 Benasol C 300 is used in non-yellowing baking enamels, polyurethane finishes and nitrocellulose lacquers. It contains coconut fatty acids, with a 33% oil content. This product has a 60% solids content, a viscosity [G.H.] of Z1-Z2, an A.V. solids amount of 6-15, and an OH solids of 2.8-3.0%. Benasol C 300 has bake, nitro and catalyze applications. 收起 | |
| BENASOL CO 34 | Benasedo | BENASOL CO 34 is an alkyd resin with a particular molecular structure,endowed with very fast drying properties, good performances in adhesion,hardness and through-dry. It is suggested to formulate industrial sealer and finishes, i.e. machinery,aerosol ena...展开 BENASOL CO 34 is an alkyd resin with a particular molecular structure,endowed with very fast drying properties, good performances in adhesion,hardness and through-dry. It is suggested to formulate industrial sealer and finishes, i.e. machinery,aerosol enamels,traffic-paints. 收起 | |
| Benasol CO 35 in Xylene | Benasedo | Benasol CO 35 in Xylene is used in very fast air-drying enamels for industrial applications and traffic-paints. It is made using soya fatty acids, with a 44% oil content. It has a viscosity [G.H.] of Z2-Z4, a 60% solids amount, an A.V. solids content of 6...展开 Benasol CO 35 in Xylene is used in very fast air-drying enamels for industrial applications and traffic-paints. It is made using soya fatty acids, with a 44% oil content. It has a viscosity [G.H.] of Z2-Z4, a 60% solids amount, an A.V. solids content of 6-15, and a colour [G.H.] of maximum 8. This product has air applications. 收起 | |
| Benasol CO 35 in Xylene/Butylacetate | Benasedo | Benasol CO 35 in Xylene/Butylacetate is used in very fast air-drying enamels for industrial applications and traffic-paints, and also has air applications. It is made using soya fatty acids, with a 44% oil content. It has a viscosity [G.H.] of Z2-Z3, a 65...展开 Benasol CO 35 in Xylene/Butylacetate is used in very fast air-drying enamels for industrial applications and traffic-paints, and also has air applications. It is made using soya fatty acids, with a 44% oil content. It has a viscosity [G.H.] of Z2-Z3, a 65% solids amount, an A.V. solids content of 6-15, and a colour [G.H.] of maximum 4. 收起 | |
| Benasol CO 37 in BUTYL ACETATE | Benasedo | Benasol CO 37 in BUTYL ACETATE is used in very fast non-yellowing air-drying enamels for exterior applications, particularly farm equipment. It is made using special fatty acids and Urethane Aliphatic, and has a 37% oil content. This product contains 65% ...展开 Benasol CO 37 in BUTYL ACETATE is used in very fast non-yellowing air-drying enamels for exterior applications, particularly farm equipment. It is made using special fatty acids and Urethane Aliphatic, and has a 37% oil content. This product contains 65% solids, a viscosity [G.H.] of Z1-Z2, an A.V. solids content of 5-12, and a color [G.H.] maximum of 4. This product has air applications. 收起 | |
| Benasol E 114 | Benasedo | Benasol E 114 is used in clear and pigmented finishes for metals and wood. It has a large compatibility with acrylics, polyesters, alkyds, film-forming vehicles and universal tinting-systems. It contains synthetic fatty acids, with a 25% oil amount. This ...展开 Benasol E 114 is used in clear and pigmented finishes for metals and wood. It has a large compatibility with acrylics, polyesters, alkyds, film-forming vehicles and universal tinting-systems. It contains synthetic fatty acids, with a 25% oil amount. This product has a viscosity [G.H.] of Z3-Z5, a colour max. of 3, an OH solids amount of 5.4-5.6, and solids amount of 75%. Benasol E 114 has bake, nitro, and catalyze applications. 收起 | |
| Benasol E 184 | Benasedo | Benasol E 184 is made using synthetic fatty acids, with an oil content of 28% and a solids amount of 70%. This product has a viscosity [G.H.] of Z1-Z3, an OH solids amount of 2.3-2.5, and a colour [G.H.] maximum of 3. It is used in non-yellowing nitrocell...展开 Benasol E 184 is made using synthetic fatty acids, with an oil content of 28% and a solids amount of 70%. This product has a viscosity [G.H.] of Z1-Z3, an OH solids amount of 2.3-2.5, and a colour [G.H.] maximum of 3. It is used in non-yellowing nitrocellulose lacquers for automotive finishes, bake and two-component polyurethane enamels. Benasol E 184 has bake, nitro and catalyze applications. 收起 | |
| Benasol F 71 | Benasedo | Benasol F 71 is used in two-component polyurethane gloss or mat finishes and sealers endowed with high transparence, and has catalyze applications. This product is made using hydrogenated castor oil and vegetable fatty acids, with an oil content of 41%. T...展开 Benasol F 71 is used in two-component polyurethane gloss or mat finishes and sealers endowed with high transparence, and has catalyze applications. This product is made using hydrogenated castor oil and vegetable fatty acids, with an oil content of 41%. This product has an OH solids amount of 4.4-4.6, an A.V. solids level of 15-20, a colour [G.H.] maximum of 4, and a viscosity of Z1-Z2. 收起 | |
| Benasol F 73 | Benasedo | Benasol F 73 is used in high-quality clear and pigmented polyurethane finishes for wood, and has catalyze applications. It uses hydrogenated castor oil, with a 43% oil and 60% solids content. This product has a 4.5-4.7% OH solids amount, a 15-23 A.V. soli...展开 Benasol F 73 is used in high-quality clear and pigmented polyurethane finishes for wood, and has catalyze applications. It uses hydrogenated castor oil, with a 43% oil and 60% solids content. This product has a 4.5-4.7% OH solids amount, a 15-23 A.V. solids level, and a Y-Z viscosity [G.H.]. 收起 | |
| BENASOL FL 34 | Benasedo | BENASOL FL 34 is a fast air drying long oil alkyd resin, modified with aromatic isocyanate, having a pale colour and giving hard and tough films. It is suggested for clear and pigmented finishes with high gloss, high body, excellent brushability and dryin...展开 BENASOL FL 34 is a fast air drying long oil alkyd resin, modified with aromatic isocyanate, having a pale colour and giving hard and tough films. It is suggested for clear and pigmented finishes with high gloss, high body, excellent brushability and drying. It is employed for silk – glossy paints or flat one-coat wall finishes, pigmented sealers for wood and primers endowed with easy sanding properties and applied by brush or roll. Wide compatibility with medium-long-oil alkyd resins. 收起 | |
| BENASOL FL 40 | Benasedo | BENASOL FL 40 is a non yellowing, slightly thixotropic high-molecular weight alkyd resin, endowed with very good flow, fast drying and wide compatibility with medium-long-oil alkyd resins. In combination with medium-oil alkyd resins, is suitable for seale...展开 BENASOL FL 40 is a non yellowing, slightly thixotropic high-molecular weight alkyd resin, endowed with very good flow, fast drying and wide compatibility with medium-long-oil alkyd resins. In combination with medium-oil alkyd resins, is suitable for sealers, matt and semi-glossy paints employed in building and costruction industries endowed with good outdoor resistance properties. 收起 | |
| Benasol FX 97 | Benasedo | Benasol FX 97 is a new Alkyd Resin with 98% solid content, which allows the formulators to stay below the requested limits. Benasol FX 97 is easy to apply by brush and widely compatible with different types of resins; due to its properties, can be used as...展开 Benasol FX 97 is a new Alkyd Resin with 98% solid content, which allows the formulators to stay below the requested limits. Benasol FX 97 is easy to apply by brush and widely compatible with different types of resins; due to its properties, can be used as grinding vehicle and can be completed with a wide range of Long Oil Alkyd Resins. It is also suggested to improve gloss and build-up of conventional paints. 收起 | |
| Benasol FX66 | Benasedo | Benasol FX66 is used in high performance non-yellowing paints for interior and exterior, for building industry and "do-it-yourself". It provides very good colour retention, and has air applications. This product uses special unsaturated fatty acids, with ...展开 Benasol FX66 is used in high performance non-yellowing paints for interior and exterior, for building industry and "do-it-yourself". It provides very good colour retention, and has air applications. This product uses special unsaturated fatty acids, with a 67% oil and 70% solids content. This product has a colour [G.H.] maximum of 3, an A.V. solids amount of 6-10, and a viscosity [G.H.] of Z1-Z2. 收起 | |
| BENASOL GEL 220 | Benasedo | BENASOL GEL 220 is a soft-gel fast drying thixotropic alkyd resin, endowed with very good flow , body and color ritention. It is employed alone or combined with medium-long oil alkyd resins to formulate enamels, glossy paints, flat one-coat wall finishes ...展开 BENASOL GEL 220 is a soft-gel fast drying thixotropic alkyd resin, endowed with very good flow , body and color ritention. It is employed alone or combined with medium-long oil alkyd resins to formulate enamels, glossy paints, flat one-coat wall finishes or pigmented sealers for wood and “do it Your self”, applied by brush or roller. 收起 | |
| BENASOL HS 120 | Benasedo | BENASOL HS 120 is an air – dryng, non yellowing, long-oil alkyd resin with a particular molecular structure, endowed with fast air drying, good gloss, colour retention, good flow and superficial hardness. It’s easy to apply by brush and it’s widely compat...展开 BENASOL HS 120 is an air – dryng, non yellowing, long-oil alkyd resin with a particular molecular structure, endowed with fast air drying, good gloss, colour retention, good flow and superficial hardness. It’s easy to apply by brush and it’s widely compatible with different types of resins, showing excellent wetting properties. Due to its properties, can be used as grinding vehicle and to produce tinting pastes. It is also suggested to improve gloss and build-up of conventional paints. 收起 | |
| BENASOL HS 6922 | Benasedo | BENASOL HS 6922 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured ...展开 BENASOL HS 6922 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. 收起 | |
| BENASOL HS 7100 | Benasedo | BENASOL HS 7100 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured ...展开 BENASOL HS 7100 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. 收起 | |
| BENASOL HS 7380 | Benasedo | BENASOL HS 7380 is a non yellowing alkyd resin with a particular molecular structure, endowed with good air drying, gloss and colour retention. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and f...展开 BENASOL HS 7380 is a non yellowing alkyd resin with a particular molecular structure, endowed with good air drying, gloss and colour retention. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance in compliance with the CE 2004 – 42 requirements for the VOC reduction . 收起 | |
| BENASOL HS 75 | Benasedo | BENASOL HS 75 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness and ease of brush application. It is suggested for white and coloured a...展开 BENASOL HS 75 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness and ease of brush application. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. 收起 | |
| BENASOL HS 753 | Benasedo | BENASOL HS 753 is a non yellowing alkyd resin , endowed with good air drying, gloss and colour retention. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. | |
| Benasol HS 754 | Benasedo | Benasol HS 754 is a non yellowing alkyd resin , endowed with good air drying, gloss and colour retention. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. | |
| BENASOL HS 86 | Benasedo | BENASOL HS 86 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured ai...展开 BENASOL HS 86 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. 收起 | |
| BENASOL L 50 AV | Benasedo | BENASOL L 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combin...展开 BENASOL L 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combination with other alkyd resins. 收起 | |
| BENASOL L 65 | Benasedo | BENASOL L 65 is a long oil, low viscosity alkyd resin,endowed with a very good,trough dryng properties also in thick film, gloss and color retention, hardness,built and brushability. It is suggested for formulating sinthetic enamels, clear and pigmented p...展开 BENASOL L 65 is a long oil, low viscosity alkyd resin,endowed with a very good,trough dryng properties also in thick film, gloss and color retention, hardness,built and brushability. It is suggested for formulating sinthetic enamels, clear and pigmented paints for “ Do it Yourself “ and maintenance, alone or combined with oils urethane modified binders. 收起 | |
| Benasol R 126 | Benasedo | Benasol R 126 is used in polyurethane clear finishes and lacquers for wood and metals, with nitro and catalyze applications. It is made using castor oil, with a 53% oil and 60% solids content. This product has an OH solids amount of 5.4-5.6%, a colour [G....展开 Benasol R 126 is used in polyurethane clear finishes and lacquers for wood and metals, with nitro and catalyze applications. It is made using castor oil, with a 53% oil and 60% solids content. This product has an OH solids amount of 5.4-5.6%, a colour [G.H.] maximum of 5, and a viscosity [G.H.] of X-Y. 收起 | |
| Benasol R 127 | Benasedo | Benasol R 127 is used in polyurethane high build-up clear finishes and lacquers endowed with good adhesion and flexibility for metals and wood. It is made using castor oil, with a 59% oil and 60% solids content. This product has an OH solids amount of 5.2...展开 Benasol R 127 is used in polyurethane high build-up clear finishes and lacquers endowed with good adhesion and flexibility for metals and wood. It is made using castor oil, with a 59% oil and 60% solids content. This product has an OH solids amount of 5.2-5.4%, a colour [G.H.] maximum of 5, a viscosity [G.H.] of W-Y, and an A.V. solids level of 6-15. Benasol R 127 has catalyze and nitro applications. 收起 | |
| BENASOL R 40 D | Benasedo | BENASOL R 40 D is an alkyd resin having good properties of adhesion and flexibility, gloss and colour retention, build – up and flow. It is suitable to produce low temperature bake enamels crosslinked with amino resins. BENASOL R 40 D is also suggested to...展开 BENASOL R 40 D is an alkyd resin having good properties of adhesion and flexibility, gloss and colour retention, build – up and flow. It is suitable to produce low temperature bake enamels crosslinked with amino resins. BENASOL R 40 D is also suggested to formulate clear and pigmented acid- curing coatings and nitrocellulose lacquers. 收起 | |
| Benasol RC 45 | Benasedo | Benasol RC 45 is used in polyurethane sealers and mat finishes for wood as well as for nitrocellulose lacquers, and can be used in bake, nitro and catalyze applications. This product uses castor and vegetable fatty acids oil, with a 41% oil and 60% solids...展开 Benasol RC 45 is used in polyurethane sealers and mat finishes for wood as well as for nitrocellulose lacquers, and can be used in bake, nitro and catalyze applications. This product uses castor and vegetable fatty acids oil, with a 41% oil and 60% solids content. Benasol RC 45 as a viscosity [G.H.] of Z1-Z3, an A.V. solids amount of 6-15, and an OH solids level of 4.2-4.4%. 收起 | |
| Benasol RC 75 | Benasedo | Benasol RC 75 is used in high-gloss polyurethane finishes and vehicles to improve the general performances of wood systems, with nitro and catalyze applications. It uses castor oil type, with a 78% oil and 80% solids content. This product has an OH solids...展开 Benasol RC 75 is used in high-gloss polyurethane finishes and vehicles to improve the general performances of wood systems, with nitro and catalyze applications. It uses castor oil type, with a 78% oil and 80% solids content. This product has an OH solids amount of 5.8-6.0%, an A.V. solids amount of 6-10, a colour [G.H.] maximum 5, and a viscosity [G.H.] of X-Y. 收起 | |
| Benasol RT 43 | Benasedo | Benasol RT 43 is a vehicle to be used alone or combined with other Benasol for polyurethane sealers or mat finishes. It is endowed with high-body and fast drying, and has catalyze applications. This product contains castor and Talloil, with a 43% oil and ...展开 Benasol RT 43 is a vehicle to be used alone or combined with other Benasol for polyurethane sealers or mat finishes. It is endowed with high-body and fast drying, and has catalyze applications. This product contains castor and Talloil, with a 43% oil and 60% solids amount. It has a viscosity [G.H.] of Z1-Z2, an A.V. solids amount of 6-15, a color [ G.H.] maximum of 6, and an OH solids levle of 4.0-4.2%. 收起 | |
| BENASOL S 50 | Benasedo | BENASOL S 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combin...展开 BENASOL S 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combination with other alkyd resins. 收起 | |
| BENASOL S 60 | Benasedo | BENASOL S 60 s an air - drying alkyd resin showing high wetting power and large compatibility with pigments; it provides good gloss and flow, colour retention, exterior durability and excellent brushability. It is suitable for making white or light shades...展开 BENASOL S 60 s an air - drying alkyd resin showing high wetting power and large compatibility with pigments; it provides good gloss and flow, colour retention, exterior durability and excellent brushability. It is suitable for making white or light shades architectural enamels for interior and exterior, as well as for marine paints. 收起 | |
| BENASOL SI 25 | Benasedo | BENASOL SI 25 is a hydroxylated non–drying alkid resin for two components polyurethane topcoats endowed with excellent hardeness, build-up, solvent resistance and very good hadesion and flexibility. It is particularly suggested for formulating clear and p...展开 BENASOL SI 25 is a hydroxylated non–drying alkid resin for two components polyurethane topcoats endowed with excellent hardeness, build-up, solvent resistance and very good hadesion and flexibility. It is particularly suggested for formulating clear and pigmented topcoats for wood forniture with high characteristics of mar resistance and high glossy also after polishing , applied in very fast curing cycle by courtain coating or spray. 收起 | |
| BENASOL SI 32 | Benasedo | BENASOL SI 32 is an hydroxylated alkyd resin, endowed with good build–up, easy sandability, high reactivity and good chemical resistances. It is suggested for formulating fast drying glossy two components topcoats both for spray or curtain coating, easy t...展开 BENASOL SI 32 is an hydroxylated alkyd resin, endowed with good build–up, easy sandability, high reactivity and good chemical resistances. It is suggested for formulating fast drying glossy two components topcoats both for spray or curtain coating, easy to be polished and piled in a very short time. It’s especially recommended for wood coating applications 收起 | |
| BENASOL SI 83 | Benasedo | BENASOL SI 83 is an air – dryng, non yellowing, long-oil alkyd resin with a particular molecular structure, endowed with fast air drying, good gloss, colour retention, good flow and superficial hardness. It’s easy to apply by brush and it’s widely compati...展开 BENASOL SI 83 is an air – dryng, non yellowing, long-oil alkyd resin with a particular molecular structure, endowed with fast air drying, good gloss, colour retention, good flow and superficial hardness. It’s easy to apply by brush and it’s widely compatible with different types of resins, showing excellent wetting properties. Due to its properties, it can be used as grinding vehicle and to produce tinting pastes. It is also suggested to improve gloss and build-up of conventional paints. 收起 | |
| Benasol T 35 | Benasedo | Benasol T 35 is used in general industrial baking enamels and hammer bake coatings, and it has nitro and bake applications. This product uses Talloil, with a 35% oil and 50% solids content. This product has a viscosity [G.H.] of Z1-Z3, an A.V. solids leve...展开 Benasol T 35 is used in general industrial baking enamels and hammer bake coatings, and it has nitro and bake applications. This product uses Talloil, with a 35% oil and 50% solids content. This product has a viscosity [G.H.] of Z1-Z3, an A.V. solids level of 6-15, and an OH solids amount of 4.5-4.7%. 收起 | |
| Benasol T 68 | Benasedo | Benasol T 68 is used in high-solids enamels for building industry and in clear finishes and impregnating vehicles for wood, and has air applications. This product uses Talloil, with a 68% oil and 75% solids amount. It has a colour [G.H.] maximum of 9, an ...展开 Benasol T 68 is used in high-solids enamels for building industry and in clear finishes and impregnating vehicles for wood, and has air applications. This product uses Talloil, with a 68% oil and 75% solids amount. It has a colour [G.H.] maximum of 9, an A.V. solids level of 6-15, and a viscosity [G.H.] of Z-Z1. 收起 | |
| Benasol UR 4984 | Benasedo | Benasol UR 4984 is used in non-yellowing clear and pigmented coatings with excellent properties of through-dry, hardness, adhesion, chemical and marine resistance as well as in premium quality finishes for yachts and "do-it-yourself" applications. This pr...展开 Benasol UR 4984 is used in non-yellowing clear and pigmented coatings with excellent properties of through-dry, hardness, adhesion, chemical and marine resistance as well as in premium quality finishes for yachts and "do-it-yourself" applications. This product uses Safflower oil, with a 65% oil content. It has a modification of Aliphatic isocyanate and a white spirit solvent. Benasol UR 4984 has a solids content of 60%, a viscosity [G.H.] of Z1-Z3, an A.V. solids level of 1-3, and a colour [G.H.] maximum of 4. 收起 | |
| Benasol UR 59 in XILENE | Benasedo | Benasol UR 59 in XILENE is used in one-component sanding sealers and fast-drying mat finishes for wooden frames. It is compatible with nitrocellulose and vinyl copolymers. This product contains vegetable oil, with a 56% oil content. It has aromatic isocyn...展开 Benasol UR 59 in XILENE is used in one-component sanding sealers and fast-drying mat finishes for wooden frames. It is compatible with nitrocellulose and vinyl copolymers. This product contains vegetable oil, with a 56% oil content. It has aromatic isocynate modification and Xylene solvent, with a 50% solids content. Benasol UR 59 in XILENE has a viscosity [G.H.] of Z2-Z4, a colour [G.H.] maximum of 6, and an A.V. solids level of 1-3. 收起 | |
| Benasol UR 59 WHITE SPIRIT AROMATIC FREE | Benasedo | Benasol UR 59 WHITE SPIRIT AROMATIC FREE is used in one-component air-drying glossy and flat finishes, suggested for floors, window and door frames. This product uses vegetable oils, with a 58% oil content. It has an Aromatic isocyanate modification and w...展开 Benasol UR 59 WHITE SPIRIT AROMATIC FREE is used in one-component air-drying glossy and flat finishes, suggested for floors, window and door frames. This product uses vegetable oils, with a 58% oil content. It has an Aromatic isocyanate modification and white spirit solvent. Benasol UR 59 WS has a solids content of 50%, a viscosity [G.H.] of Z2-Z4, an A.V. solids level of 1-3, and a colour [G.H.] maximum of 6. 收起 | |
| Benasol UR 60 | Benasedo | Benasol UR 60 is used in one-component fast-drying clear varnishes with good resistance to industrial and marine environment as well as in coatings for floors, wooden frames and "do-it-yourself" applications. This product uses vegetable oils, has an aroma...展开 Benasol UR 60 is used in one-component fast-drying clear varnishes with good resistance to industrial and marine environment as well as in coatings for floors, wooden frames and "do-it-yourself" applications. This product uses vegetable oils, has an aromatic isocyanate modification and Xylene solvent, with a 65% oil and 60% solids content. Benasol UR 60 has an A.V. solids content of 1-3, a viscosity [G.H.] of Z2-Z4, and a colour [G.H.] maximum of 6. 收起 | |
| BENASOL UR 6005 | Benasedo | BENASOL UR 6005 is an air - drying, non yellowing, oil, modified with aliphatic isocyanate, endowed with very good colour and gloss retention, hardness, flexibility, flow and easy brushability. It is suggested to formulate clear and pigmented finishes for...展开 BENASOL UR 6005 is an air - drying, non yellowing, oil, modified with aliphatic isocyanate, endowed with very good colour and gloss retention, hardness, flexibility, flow and easy brushability. It is suggested to formulate clear and pigmented finishes for interior and exterior, when good weatherability and chemical or marine resistance are required, as for yachting paints. 收起 | |
| BENASOL UR 61 | Benasedo | BENASOL UR 61 is a fast air drying alkyd resin, modified with aromatic isocyanate, having a pale colour and giving hard and tough films. It is suggested for clear and pigmented finishes with high gloss, high body, excellent brushability and drying. It is ...展开 BENASOL UR 61 is a fast air drying alkyd resin, modified with aromatic isocyanate, having a pale colour and giving hard and tough films. It is suggested for clear and pigmented finishes with high gloss, high body, excellent brushability and drying. It is suggested for clear and pigmented finishes, easy to be applied by brush and showing good exterior durability, high gloss, flow and drying. 收起 | |
| Benasol UR 64 | Benasedo | Benasol UR 64 is an alkyd-urethane resin endowed with outdoor resistance, suggested to formulate clear or pigmented finishes for wood and metals. It uses soya fatty acids, has an Aliphatic isocyanate modification and a white spirit solvent, with a 61% oil...展开 Benasol UR 64 is an alkyd-urethane resin endowed with outdoor resistance, suggested to formulate clear or pigmented finishes for wood and metals. It uses soya fatty acids, has an Aliphatic isocyanate modification and a white spirit solvent, with a 61% oil and 55% solids content. Benasol UR 64 has an A.V. solids level of 1-3, a colour [G.H.] maximum of 5, and a viscosity [G.H.] of X-Y. 收起 | |
| Benasol UR 65 | Benasedo | Benasol UR 65 is used in non-yellowing varnishes and paints endowed with high-gloss retention, hardness and chalk-resistance. It uses soya fatty acids, has an Aliphatic isocyanate modification and a white spirit solvent, with a 58% oil and 55% solids cont...展开 Benasol UR 65 is used in non-yellowing varnishes and paints endowed with high-gloss retention, hardness and chalk-resistance. It uses soya fatty acids, has an Aliphatic isocyanate modification and a white spirit solvent, with a 58% oil and 55% solids content. Benasol UR 64 has an A.V. solids level of 2-6, a colour [G.H.] maximum of 5, and a viscosity [G.H.] of Z1-Z3. 收起 | |
| BENASOL UR 85 | Benasedo | BENASOL UR 85 is a high solid urethane modified alkyd resin with very good exterior resistance, color and gloss retention. It is suggested for clear and pigmented topcoats, both for glossy and, especially, matt products. | |
| BENCRYL PU 137 | Benasedo | BENCRYL PU 137 is a linear aliphatic urethane acrylated oligomer endowed with very good flexibility, good hardnes and adhesion on wood, plastic and paper. It is an ideal UV curing binder for wood floor coatings. | |
| BENCRYL PU 139 | Benasedo | BENCRYL PU 139 is an acrili oligomer, with a urethane aromatic modification, with good hardness and flexibility. It is indicated for paper, wood and plastic substrates, where adhesion and, especially, abrasion resi stance are requested. BENCRYL PU 139 is...展开 BENCRYL PU 139 is an acrili oligomer, with a urethane aromatic modification, with good hardness and flexibility. It is indicated for paper, wood and plastic substrates, where adhesion and, especially, abrasion resi stance are requested. BENCRYL PU 139 is curable thorugh EB or UV radiations, when used in combination with photoinitiators. 收起 | |
| BENCRYL PU 141 | Benasedo | BENCRYL PU 141 is a non-yellowing aliphatic urethane acrylated oligomer. It is suggested for formulating enamels for wood, plastic and paper endowed with good flexibility, very good abrasion and chemical resistances. UV curing is achived by the addition o...展开 BENCRYL PU 141 is a non-yellowing aliphatic urethane acrylated oligomer. It is suggested for formulating enamels for wood, plastic and paper endowed with good flexibility, very good abrasion and chemical resistances. UV curing is achived by the addition of photoinitiators whit small amounts of photoactivator (acrylated amine) 收起 | |
| BENCRYL PU 1515 | Benasedo | BENCRYL PU 1515 is a linear aromatic urethane acrylated oligomer endowed with good flexibility, very good chemicals resistances, hardness and adhesion on wood, plastic and paper. It is an ideal UV curing binder for wood floor coatings. | |
| Benester 2580 | Benasedo | Benester 2580 is used in high-yield coil-coating enamels with very good characteristics and adhesion on metals without primer. This product is a high aliphatic content with a blend of solvents. It contains 70% solids, a viscosity [G.H.] of Y-Z, an A.V. so...展开 Benester 2580 is used in high-yield coil-coating enamels with very good characteristics and adhesion on metals without primer. This product is a high aliphatic content with a blend of solvents. It contains 70% solids, a viscosity [G.H.] of Y-Z, an A.V. solids amount of 5-10, a colour [G.H.] maximum of 2, and an OH solids content of 0.9-1,1%. 收起 | |
| Benester 27 | Benasedo | Benester 27 is a sligty branched hydroxylated polyester resin. It is recommended for baking systems, crosslinked with amino resins and/or blocked aliphatic polyisocyanates, and particularly indicated for back coatings enamels in coil coating applications. | |
| Benester 46 | Benasedo | Benester 46 is a linear, saturated, slightly branched non yellowing Polyester resin. It is suggested for increasing the polyester systems flexibility. It is also suggested for baking primers and topcoats used in can and coil - coating fields. | |
| BENESTER 5327 | Benasedo | BENESTER 5327 is a high – solids, slightly branched, saturated Polyester Resin. It is particularly suggested to increase flexibility of the polyesters resins in can and coil systems, crosslinked with amino-resins or blocked aliphatic polyisocyanates. | |
| BENESTER 5918 | Benasedo | BENESTER 5918 is a slightly branched hydroxylated saturated polyester, endowed with very good adhesion and high–yield characteristics. It is suitable for concentraded pigment pastes due to its good wetting power. | |
| Benester 602 | Benasedo | Benester 602 is used in low-cost bake sealers and topcoats that are specially designed for coil-coatings with higher solid contents. It is linear, an H.B. Naphta/M.P.A. solvent, and has a 65% solids content. This product has a viscosity [G.H.] of U-V, an ...展开 Benester 602 is used in low-cost bake sealers and topcoats that are specially designed for coil-coatings with higher solid contents. It is linear, an H.B. Naphta/M.P.A. solvent, and has a 65% solids content. This product has a viscosity [G.H.] of U-V, an A.V. solids amount of 5-10, an OH solids amount of 1.3-1.5, and a color [G.H.] maximum of 3. 收起 | |
| Benester 694 | Benasedo | Benester 694 is a linear polyester with low hydroxyl value and high reactivity, endowed with good characteristics of adhesion and flexibility. It is employed in baking anticorrosive primers, crosslinked with amino-resins and/or blocked aliphatic polyisoci...展开 Benester 694 is a linear polyester with low hydroxyl value and high reactivity, endowed with good characteristics of adhesion and flexibility. It is employed in baking anticorrosive primers, crosslinked with amino-resins and/or blocked aliphatic polyisocianates, suitable for the coil-coating industry, where good mechanical performances are required. Benester 694 is also recommended for anticorrosive primers used in the Automotive industry. 收起 |
