| EXOCOAT™ 143 | Axcentive Sarl | EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS ...展开 EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS as well as to old coating layers. It covalently bonds with the substrate resulting in a very durable finish. It can be used as a standalone resin or might be formulated with other raw materials like white and colored pigments, organic resins, fillers, and additives. The use of water-based raw materials should be avoided. Durability is a unique feature of EXOCOAT® 143. It can sustain mechanical abrasion, and chemical attack and is UV stable. When applied at a very low layer thickness of 0.5 to 2µm it provides the surface with a protective hard coating that shows durable easy-to-clean, dirt resistance, anti-graffiti, and strong water repellency properties. It is suitable for ambient or force-cured, high-performance industrial coatings such as protective, coil, marine, and automotive. EXOCOAT® 143-based paints may be brushed, rolled, or sprayed by HVLP or airless spray. 收起 | |
| EXOCOAT™ 151A | Axcentive Sarl | EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...展开 EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151A. It can be used as a general air purifier. Though most effective in outdoor light conditions, it is adapted for use under visible light as found in the interior. In all cases, it should be used as a topcoat to ensure its full effect. Glass and walls coated with EXOCOAT® 151A are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It may be used on other flat surfaces such as plastics or coated substrates yet only interior. It dries under room temperature conditions. Spray application is recommended to reach thin monolayers which prove to be more effective. It is listed with EINECS. TSCA, AICS, and CEPA. 收起 | |
| EXOCOAT™ 151B | Axcentive Sarl | EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...展开 EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151B. In all cases, it should be used as a topcoat to ensure its full effect. EXOCOAT® 151B coated walls are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It is targeted for porous substrates like concrete, brickwork, and gypsum. It is not meant for glass substrates. It dries under room temperature conditions. Brush, roller, or Spray application is recommended to reach homogeneous coatings. It is listed with EINECS. TSCA, AICS, and CEPA. 收起 | |
| EXOCOAT™ 161 | Axcentive Sarl | EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extre...展开 EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extreme hardness (9H). Offers chemical-, scratch-, oxidation resistance, and temperature resistance over 1000°C for prolonged time. It can function as stand-alone resin at a layer thickness of 0.5 to 2 µm to form a durable finish that can be easy to clean. It bonds to substrates such as steel, aluminum, glass, and old coating layers. It can be used as conversion coating replacing Cr(VI). It may be co-formulated with the most frequently used coating ingredients from the group of pigments, fillers, resins, additives, and (co-)solvents and creates colored, super hard, or matte surfaces. EXOCOAT® 161 is highly advised to be used in aprotic solvents. It has a shelf life of 6 months. 收起 | |
| EXOCOAT™ AC | Axcentive Sarl | EXOCOAT® AC by Axcentive is a hybrid sol-gel resin for anti-corrosive conversion coatings in 60% ethanol. It is covalently bonded to the surface and applied directly to metal (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). ...展开 EXOCOAT® AC by Axcentive is a hybrid sol-gel resin for anti-corrosive conversion coatings in 60% ethanol. It is covalently bonded to the surface and applied directly to metal (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It functions as a replacement for the Cr3+ and Cr6+ based system as used in metal plating and automotive industries. It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It can also be used as micrometer-thin primers under conventional organic coatings. It can be overcoated by epoxy primer or polyurethane topcoat systems. EXOCOAT® AC is suitable for conventional low & high pressure airless and air-mixing spraying, dipping, rolling, and brushing. It has a shelf life of 12 months. 收起 | |
| EXOCOAT™ ACX-W | Axcentive Sarl | EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless ...展开 EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It is used as a replacement for chromium-based primers on aluminum and other metals. It can be used as a conversion primer for a coating system based on an epoxy coating and polyurethane topcoat. It may omit toxic chemicals and functions as a replacement for Cr3+ and Cr6+-based systems used in metal plating and aerospace industries. EXOCOAT® ACX-W is applied with conventional low-pressure and high-pressure airless and air-mix spraying, dipping, rolling and brushing. It has a shelf life of 12 months. 收起 | |
| EXOCOAT™ AM | Axcentive Sarl | EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down v...展开 EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down viruses and bacteria. It eradicates viruses such as influenza, SARS-COV-2, dengue & hepatitis and bacteria such as E. coli, MSRA, streptococcus, listeria, pneumonia, and salmonella. It is activated by light and displays quick drying at room temperature. Spray application is recommended to reach thin monolayers. It exhibits curing at room temperature up to 300°C and super hard particles (1GPa Vickers). It is easy to apply & durable, allowing longer disinfection intervals while preserving hygiene level. It shows non-silver leaching, efficacious even under low light conditions, lower service frequency, and no need for frequent disinfection routine. It is used in the state-of-the-art continuous antimicrobial coating for high-traffic areas. EXOCOAT® AM is suitable for topcoats for any surface inside buildings, stores, hospitals, and vehicles. The shelf life of this product is 9 months. 收起 | |
| EXOCOAT™ Clearview | Axcentive Sarl | EXOCOAT® Clearview by Axcentive is a 1K hybrid sol-gel system in ethanol. It has been designed for water-repellent, easy-to-clean coatings for glass and ceramic substrates. A substrate coated with EXOCOAT® Clearview will turn into a hard, water-repellent ...展开 EXOCOAT® Clearview by Axcentive is a 1K hybrid sol-gel system in ethanol. It has been designed for water-repellent, easy-to-clean coatings for glass and ceramic substrates. A substrate coated with EXOCOAT® Clearview will turn into a hard, water-repellent durable easy-to-clean surface. EXOCOAT® Clearview keeps windscreens clean from raindrops and improves vision drastically, especially in difficult wet road conditions, which can be experienced day and night. Besides, it can be used to make easy-to-clean, water shedding tiles and chrome for example used in kitchens and bathrooms. 收起 | |
| EXOCOAT™ Clearview-2 | Axcentive Sarl | EXOCOAT® Clearview-2 by Axcentive is a 2K hybrid sol-gel in ethanol. It is designed for durable water repellent, easy-to-clean, dirt resistant glass coatings. This solvent-based nanosystem can be applied in coatings for automotive windscreens, or glass ba...展开 EXOCOAT® Clearview-2 by Axcentive is a 2K hybrid sol-gel in ethanol. It is designed for durable water repellent, easy-to-clean, dirt resistant glass coatings. This solvent-based nanosystem can be applied in coatings for automotive windscreens, or glass bathroom doors. It can be applied as such or diluted, in coatings as a monolayer to obtain a very hard and durable hydrophobic surface. EXOCOAT® Clearview-2 keeps windows clean from raindrops and improves vision drastically, especially in difficult wet road conditions, which can be experienced day and night. In bathroom glass, it makes the water run down fast and avoids water spots. 收起 | |
| EXOCOAT™ SH | Axcentive Sarl | EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pave...展开 EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pavement, walls, and stucco to get the so-called Lotus Effect. The sol-gel system deposits superhydrophobic particles on the porous substrate. EXOCOAT® SH will not form a film and as a result, the wall stays breathable. With the contact angle of 145o water droplets bounce back from the surface and will roll down immediately upon touch. Thus, the wall remains dry, and clean and will behave as an efficient barrier against water. 收起 | |
| KCM 1200C | Vink Chemicals GmbH & Co. KG | KCM 1200C is an industrial grade sodium carboxymethyl cellulose in the form of a white powder. It provides thickening, water retention, film-forming, rheology modification, and lubricity to desired products. This product is well suited for use in industri...展开 KCM 1200C is an industrial grade sodium carboxymethyl cellulose in the form of a white powder. It provides thickening, water retention, film-forming, rheology modification, and lubricity to desired products. This product is well suited for use in industrial paint applications. 收起 | |
| KCM 2000C | Vink Chemicals GmbH & Co. KG | KCM 2000C is an industrial grade sodium carboxymethyl cellulose in the form of a white powder. It provides thickening, water retention, film-forming, rheology modification, and lubricity to desired products. This product is well suited for use in industri...展开 KCM 2000C is an industrial grade sodium carboxymethyl cellulose in the form of a white powder. It provides thickening, water retention, film-forming, rheology modification, and lubricity to desired products. This product is well suited for use in industrial paint applications. 收起 | |
| KCM 4000P | Vink Chemicals GmbH & Co. KG | KCM 4000P is an industrial grade sodium carboxymethyl cellulose in the form of a white powder. It provides thickening, water retention, film-forming, rheology modification, and lubricity to desired products. This product is well suited for use in industri...展开 KCM 4000P is an industrial grade sodium carboxymethyl cellulose in the form of a white powder. It provides thickening, water retention, film-forming, rheology modification, and lubricity to desired products. This product is well suited for use in industrial paint applications. 收起 | |
| KCM 6000P | Vink Chemicals GmbH & Co. KG | KCM 6000P is an industrial grade sodium carboxymethyl cellulose in the form of a white powder. It provides thickening, water retention, film-forming, rheology modification, and lubricity to desired products. This product is well suited for use in industri...展开 KCM 6000P is an industrial grade sodium carboxymethyl cellulose in the form of a white powder. It provides thickening, water retention, film-forming, rheology modification, and lubricity to desired products. This product is well suited for use in industrial paint applications. 收起 | |
| KCM 80000QD | Vink Chemicals GmbH & Co. KG | KCM 80000QD is an industrial grade sodium carboxymethyl cellulose in the form of a white powder. It provides thickening, water retention, film-forming, rheology modification, and lubricity to desired products. This product is well suited for use in indust...展开 KCM 80000QD is an industrial grade sodium carboxymethyl cellulose in the form of a white powder. It provides thickening, water retention, film-forming, rheology modification, and lubricity to desired products. This product is well suited for use in industrial paint applications. 收起 | |
| KEC 100000 | Vink Chemicals GmbH & Co. KG | KEC 100000 is a regular type hydroxyethyl cellulose in the form of a white powder. It provides lubricity, good water retention, and improved color development and stabilization to desired products. This product is well suited for use in water-based paint ...展开 KEC 100000 is a regular type hydroxyethyl cellulose in the form of a white powder. It provides lubricity, good water retention, and improved color development and stabilization to desired products. This product is well suited for use in water-based paint applications. 收起 | |
| KEC 100000B | Vink Chemicals GmbH & Co. KG | KEC 100000B is a biostable type hydroxyethyl cellulose in the form of a white powder. It provides low-foaming, better opacity, and more stable viscosity to desired products. This product is well suited for use in water-based paint applications. | |
| KEC 150 | Vink Chemicals GmbH & Co. KG | KEC 150 is a regular type hydroxyethyl cellulose in the form of a white powder. It provides lubricity, good water retention, and improved color development and stabilization to desired products. This product is well suited for use in water-based paint app...展开 KEC 150 is a regular type hydroxyethyl cellulose in the form of a white powder. It provides lubricity, good water retention, and improved color development and stabilization to desired products. This product is well suited for use in water-based paint applications. 收起 | |
| KEC 150000 | Vink Chemicals GmbH & Co. KG | KEC 150000 is a regular type hydroxyethyl cellulose in the form of a white powder. It provides lubricity, good water retention, and improved color development and stabilization to desired products. This product is well suited for use in water-based paint ...展开 KEC 150000 is a regular type hydroxyethyl cellulose in the form of a white powder. It provides lubricity, good water retention, and improved color development and stabilization to desired products. This product is well suited for use in water-based paint applications. 收起 | |
| KEC 30000 | Vink Chemicals GmbH & Co. KG | KEC 30000 is a regular type hydroxyethyl cellulose in the form of a white powder. It provides lubricity, good water retention, and improved color development and stabilization to desired products. This product is well suited for use in water-based paint a...展开 KEC 30000 is a regular type hydroxyethyl cellulose in the form of a white powder. It provides lubricity, good water retention, and improved color development and stabilization to desired products. This product is well suited for use in water-based paint applications. 收起 | |
| KEC 30000B | Vink Chemicals GmbH & Co. KG | KEC 30000B is a biostable type hydroxyethyl cellulose in the form of a white powder. It provides low-foaming, better opacity, and more stable viscosity to desired products. This product is well suited for use in water-based paint applications. | |
| KEC 6000 | Vink Chemicals GmbH & Co. KG | KEC 6000 is a regular type hydroxyethyl cellulose in the form of a white powder. It provides lubricity, good water retention, and improved color development and stabilization to desired products. This product is well suited for use in water-based paint ap...展开 KEC 6000 is a regular type hydroxyethyl cellulose in the form of a white powder. It provides lubricity, good water retention, and improved color development and stabilization to desired products. This product is well suited for use in water-based paint applications. 收起 | |
| KEC 60000 | Vink Chemicals GmbH & Co. KG | KEC 60000 is a regular type hydroxyethyl cellulose in the form of a white powder. It provides lubricity, good water retention, and improved color development and stabilization to desired products. This product is well suited for use in water-based paint a...展开 KEC 60000 is a regular type hydroxyethyl cellulose in the form of a white powder. It provides lubricity, good water retention, and improved color development and stabilization to desired products. This product is well suited for use in water-based paint applications. 收起 | |
| KEC 60000B | Vink Chemicals GmbH & Co. KG | KEC 60000B is a biostable type hydroxyethyl cellulose in the form of a white powder. It provides low-foaming, better opacity, and more stable viscosity to desired products. This product is well suited for use in water-based paint applications. | |
| KEM 100000 | Vink Chemicals GmbH & Co. KG | KEM 100000 is a surface treated type methyl hydroxyethyl cellulose in the form of a white powder. It is used as a thickener, protective colloid, water retention agent, and rheology modifier for desired products. This product is well suited for use in ceme...展开 KEM 100000 is a surface treated type methyl hydroxyethyl cellulose in the form of a white powder. It is used as a thickener, protective colloid, water retention agent, and rheology modifier for desired products. This product is well suited for use in cement-based tile adhesives, mortars, grouts, fillers, white render finishes, and paints. 收起 | |
| KEM 150000 | Vink Chemicals GmbH & Co. KG | KEM 150000 is a surface treated type methyl hydroxyethyl cellulose in the form of a white powder. It is used as a thickener, protective colloid, water retention agent, and rheology modifier for desired products. This product is well suited for use in ceme...展开 KEM 150000 is a surface treated type methyl hydroxyethyl cellulose in the form of a white powder. It is used as a thickener, protective colloid, water retention agent, and rheology modifier for desired products. This product is well suited for use in cement-based tile adhesives, mortars, grouts, white render finishes, and paints. 收起 | |
| KEM 150000M | Vink Chemicals GmbH & Co. KG | KEM 150000M is a modified type methyl hydroxyethyl cellulose in the form of a white powder. It is used as a thickener, protective colloid, water retention agent, and rheology modifier for desired products. This product is well suited for use in cement-bas...展开 KEM 150000M is a modified type methyl hydroxyethyl cellulose in the form of a white powder. It is used as a thickener, protective colloid, water retention agent, and rheology modifier for desired products. This product is well suited for use in cement-based tile adhesives, mortars, grouts, white render finishes, and plasters. 收起 | |
| KEM 300 | Vink Chemicals GmbH & Co. KG | KEM 300 is a surface treated type methyl hydroxyethyl cellulose in the form of a white powder. It is used as a thickener, protective colloid, water retention agent, and rheology modifier for desired products. This product is well suited for use in paint a...展开 KEM 300 is a surface treated type methyl hydroxyethyl cellulose in the form of a white powder. It is used as a thickener, protective colloid, water retention agent, and rheology modifier for desired products. This product is well suited for use in paint applications. 收起 | |
| KEM 40000M2 | Vink Chemicals GmbH & Co. KG | KEM 40000M2 is a modified type methyl hydroxyethyl cellulose in the form of a white powder. It is used as a thickener, protective colloid, water retention agent, and rheology modifier for desired products. This product is well suited for use in cement-bas...展开 KEM 40000M2 is a modified type methyl hydroxyethyl cellulose in the form of a white powder. It is used as a thickener, protective colloid, water retention agent, and rheology modifier for desired products. This product is well suited for use in cement-based tile adhesives, mortars, white render finishes, and plasters. 收起 | |
| KEM 75000 | Vink Chemicals GmbH & Co. KG | KEM 75000 is a surface treated type methyl hydroxyethyl cellulose in the form of a white powder. It is used as a thickener, protective colloid, water retention agent, and rheology modifier for desired products. This product is well suited for use in cemen...展开 KEM 75000 is a surface treated type methyl hydroxyethyl cellulose in the form of a white powder. It is used as a thickener, protective colloid, water retention agent, and rheology modifier for desired products. This product is well suited for use in cement-based tile adhesives, mortars, grouts, fillers, white render finishes, and paints. 收起 | |
| KMP 100000 | Vink Chemicals GmbH & Co. KG | KMP 100000 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic pr...展开 KMP 100000 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, grouts, stuccos, fillers, and white render finishes. 收起 | |
| KMP 100000N | Vink Chemicals GmbH & Co. KG | KMP 100000N is a non-surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotrop...展开 KMP 100000N is a non-surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, grouts, stuccos, fillers, plasters, and white render finishes. 收起 | |
| KMP 15000 | Vink Chemicals GmbH & Co. KG | KMP 15000 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic pro...展开 KMP 15000 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in mortars, fillers, and plasters. 收起 | |
| KMP 150000M2 | Vink Chemicals GmbH & Co. KG | KMP 150000M2 is a modified type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properti...展开 KMP 150000M2 is a modified type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, stuccos, fillers, and white render finishes. 收起 | |
| KMP 150000N | Vink Chemicals GmbH & Co. KG | KMP 150000N is a non-surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotrop...展开 KMP 150000N is a non-surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, grouts, stuccos, fillers, plasters, and white render finishes. 收起 | |
| KMP 15000M | Vink Chemicals GmbH & Co. KG | KMP 15000M is a modified type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties...展开 KMP 15000M is a modified type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, stuccos, fillers, and white render finishes. 收起 | |
| KMP 200000 | Vink Chemicals GmbH & Co. KG | KMP 200000 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic pr...展开 KMP 200000 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, grouts, stuccos, plasters, and white render finishes. 收起 | |
| KMP 30000M4 | Vink Chemicals GmbH & Co. KG | KMP 30000M4 is a modified type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic propertie...展开 KMP 30000M4 is a modified type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, grouts, stuccos, fillers, and white render finishes. 收起 | |
| KMP 400 | Vink Chemicals GmbH & Co. KG | KMP 400 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic prope...展开 KMP 400 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in self-leveling applications. 收起 | |
| KMP 6000M | Vink Chemicals GmbH & Co. KG | KMP 6000M is a modified type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties....展开 KMP 6000M is a modified type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, stuccos, fillers, and white render finishes. 收起 | |
| KMP 75000 | Vink Chemicals GmbH & Co. KG | KMP 75000 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic pro...展开 KMP 75000 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, grouts, stuccos, fillers, plasters, and white render finishes. 收起 | |
| Uniphur Black BRN | UNIVERSAL DYECHEM PVT. LTD. | Uniphur Black BRN is a Sulphur Dyestuff with a Color Index Number of Black 1. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
| Uniphur Blue 2BN | UNIVERSAL DYECHEM PVT. LTD. | Uniphur Blue 2BN is a Sulphur Dyestuff with a Color Index of Blue 7. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
| Uniphur Yellow Brown | UNIVERSAL DYECHEM PVT. LTD. | Uniphur Yellow Brown is a Sulphur Dyestuff with a Color Index Number of Brown 10. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
| Uniphur Yellow GC | UNIVERSAL DYECHEM PVT. LTD. | Uniphur Yellow GC is a Sulphur Dyestuff with a Color Index Number of Yellow 2. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
| Univat Brown BR | UNIVERSAL DYECHEM PVT. LTD. | Univat Brown BR is a vat dyestuff with a Color Index of 1. This product is used for cotton, viscose and linen fibers and as an additive in paints, coatings and inks. | |
| Univat Green FB | UNIVERSAL DYECHEM PVT. LTD. | Univat Green FB is a dyestuff with a Color Index Number of 1 and a Color Index Name of 42040:1. This product is used for cotton, viscose and linen fibers and as an additive in paints, coatings and inks. | |
| Univat Grey 2B | UNIVERSAL DYECHEM PVT. LTD. | Univat Grey 2B is a vat dyestuff with a Color Index of Black 16. This product is used for cotton,viscose and linen fibers and as an additive in paints, coatings and inks. | |
| Univat Indigo Blue | UNIVERSAL DYECHEM PVT. LTD. | Univat Indigo Blue is a Vat Dyestuff with a Color Index Number of Indigo Blue 1. This product is used for cotton, viscose and linen fibers that has several different shades and as an additive in paints, coatings and inks. | |
| Univat Khaki 2G | UNIVERSAL DYECHEM PVT. LTD. | Univat Khaki 2G is a Vat Dyestuff with a Color Index of Green 8. It is used for cotton, viscose and linen fibers that has several different shades and as an additive in paints, coatings and inks. | |
| Univat Olive R | UNIVERSAL DYECHEM PVT. LTD. | Univat Olive R is a Vat Dyestuff with a Color Index Number of Black 27. It is used for cotton, viscose and linen fibers and as an additive in paints, coatings and inks. | |
| Univat Olive T | UNIVERSAL DYECHEM PVT. LTD. | Univat Olive T is a Vat Dyestuff with a Color Index Number of Black 25. It is used in cotton, viscose and linen fibers that has several different shades and as an additive in paints, coatings and inks. | |
| Univat Red 6B | UNIVERSAL DYECHEM PVT. LTD. | Univat Red 6B is a Vat Dyestuff with a Color Index Number of Red 13. It is a product used for cotton, viscose and linen fibers that has several different shades as well as an additive in paints, coatings and inks. | |
| Univat Violet 2R | UNIVERSAL DYECHEM PVT. LTD. | Univat Violet 2R is a Vat Dyestuff with a Color Index Number of Violet 1. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
| Univat Yellow GC | UNIVERSAL DYECHEM PVT. LTD. | Univat Yellow GC is a Vat Dyestuff with a Color Index Number of Yellow 2. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
| Vinkotech BTA | Vink Chemicals GmbH & Co. KG | Vinkotech BTA is a white granular benzotriazole designed for use as a corrosion inhibitor in paints and dyes. | |
| Vinkotech MIPA | Vink Chemicals GmbH & Co. KG | Vinkotech MIPA is a monoisopropanolamine in the form of a colorless, clear liquid. Serving as an intermediate, stabilizer, and corrosion inhibitor, this product finds application in dyes, pigments, glues, and adhesives. | |
| Vinkotech OPO | Vink Chemicals GmbH & Co. KG | Vinkotech OPO is an essential oil obtained from orange peels, well suited for use in applications such as solvent-based adhesives, surface strippers, and protective wood coatings and varnishes. | |
| Vinkotech TTA | Vink Chemicals GmbH & Co. KG | Vinkotech TTA is a white granular tolytriazole designed for use as a corrosion inhibitor in paints and dyes. |
