UL Prospector
Prospector
Company: Weifang Jahwa Chemical Co., Ltd. (Weifang Fengtai New Material Co., Ltd.)  Company: Kolon  Company: ANGUS Chemical Company 安格斯化学公司  Company: Bernd Schwegmann GmbH & Co. KG  Clear All 

成功!

成功保存搜索结果
130 条结果
AEPD® VOX 1000 ANGUS Chemical Company 安格斯化学公司 一个新的多官能团添加剂，用于低气味，零VOC户内水性油漆。它具有非常温和的气味，高沸点和低蒸汽压。这些特点使之成为需要符合EU directive 2004/42/EC法规的油漆生产商一个理想的配方工具
ALKATERGE®-T ANGUS Chemical Company 安格斯化学公司 ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emu...展开 ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emulsifier. At ordinary room temperature, ALKATERGE®-T is a waxy solid which is highly soluble in aromatic hydrocarbons and lower alcohols or ketones, moderately soluble in aliphatic hydrocarbons, and miscible with most vegetable oils. In its liquid state, ALKATERGE®-T is miscible with almost all organic liquids. ALKATERGE®-T is useful as a surface active agent which is indicated by the fact that 0.1% in mineral oil reduces the interfacial surface tension against water approximately 95%, or to less than 2 dynes/cm. 收起
AMP® ANGUS Chemical Company 安格斯化学公司 这是一种无色，低粘度流体，大量用于金属加工流体，涂料，锅炉水体系和个人护理等领域。它可用作中和树脂的胺，协同分散剂，脱甲醛剂，腐蚀抑制剂以及作为合成的原料。
AMP-95® ANGUS Chemical Company 安格斯化学公司 被普遍认为是一种用于所有类型的乳胶漆的多功能添加剂。
ANTIGEL® Bernd Schwegmann GmbH & Co. KG Antigel®主要用于基于醇酸、醇酸/三聚氰胺、硝化纤维化合物和聚酯的含溶剂体系。Antigel®应用于基于醇酸或醇酸/丙烯酸的水稀释体系中，也具有上述性能
ANTIGEL® HS Bernd Schwegmann GmbH & Co. KG 具有良好润湿性和分散性的粘度稳定剂，尤其适合高固体份涂料体系，不含酮肟和芳香族化合物，可生物降解
ANTIGEL® KF Bernd Schwegmann GmbH & Co. KG ANTIGEL® KF是一种多功能助剂，适合溶剂型和水性涂料体系。它不含酮肟和芳香族化合物，可生物降解。ANTIGEL® KF-D的多功能性源于各组分的协同增效作用。其稳定作用基于抗氧化剂的氧结合特性。ANTIGEL® KF-D改善了流平性和全干性。ANTIGEL® KF-D降低常用亲水颜料和憎水基料之间的界面张力。颜料颗粒分布均匀，因而色度深。可减少分散时间、絮凝和沉降现象，提升光泽度。大大避免了沉降发生。由于它具有出色的润湿性，可获得最佳的颜色深度
ANTIGEL® KF-D Bernd Schwegmann GmbH & Co. KG Antigel® KF/KF-D可用于几乎所有常规水性和溶剂型油漆体系中
AVANTANE® PA 4000 ANGUS Chemical Company 安格斯化学公司 一种专门设计用于满足溶剂型轮转凹印和柔印印刷性能要求的添加剂。
Barium Stearate Weifang Jahwa Chemical Co., Ltd. (Weifang Fengtai New Material Co., Ltd.) Barium Stearate is a white powder that has a barium content of 20%. This product is often used as a flatting and sanding agent in lacquers, coatings and inks.
BLISTER FREE 3 Bernd Schwegmann GmbH & Co. KG Blister Free 3可用于含溶剂和水稀释体系。在含溶剂体系中，Blister Free 3作为消泡剂尤为有效，也可部分作为流平剂。它适用于以下基料：醇酸、醇酸/聚酯-、不饱和聚酯-、NC-、AC-、PU和丙烯酸体系。Blister Free 3在水稀释涂料体系中也非常有效，尤其是基于醇酸/丙烯酸、饱和聚酯和环氧体系
BLISTER FREE 45 Bernd Schwegmann GmbH & Co. KG Blister Free 45在以下溶剂型体系中具有良好的消泡效果，基于硝基纤维素、酸催化、通用聚氨酯。Blister Free 45对于水稀释涂料也具有非常好的消泡效果，基于以下基料：聚酯、酸性树脂、丙烯酸
BLISTER FREE 54 Bernd Schwegmann GmbH & Co. KG Blister Free 54可有效应用于几乎所有含溶剂单或多组分油漆和涂料体系，包括自干和烘烤醇酸、环氧体系、PU体系、丙烯酸，特殊的应用领域是印刷油墨和卷材涂料体系
BLISTER FREE 55 Bernd Schwegmann GmbH & Co. KG Blister Free 55在各种水性醇酸体系中具有出色的消泡效果，例如那些中和后变水溶性，以及在醇酸乳液中，含或不含助溶剂的。在很多改性醇酸和醇酸/丙烯酸混合体系中也具有非常好的消泡效果
BLISTER FREE 56 Bernd Schwegmann GmbH & Co. KG Blister Free 56 可用于UV固化体系。它可用于下面提到的水稀释体系。Blister Free 56具有良好的消泡效果，它在这些体系：醇酸/丙烯酸油漆、饱和聚酯、环氧中有部分流平功能
BLISTER FREE 66 Bernd Schwegmann GmbH & Co. KG Blister Free 66可作为消泡剂应用于所有常规涂料体系中。Blister Free 66 在基于聚酯、聚氨酯和丙烯酸酯的体系中尤为有效
BLISTER FREE 75 Bernd Schwegmann GmbH & Co. KG Blister Free 75在常规NC体系和NC混合体系、AC和环氧体系、PU和自干丙烯酸体系中具有良好的消泡效果。Blister Free 75在基于以下基料：长油度醇酸、中油度醇酸、丙烯酸酯/中油度醇酸、丙烯酸酯/长油度醇酸、环氧的水稀释涂料体系中具有非常好的消泡效果
BLISTER FREE 77 Bernd Schwegmann GmbH & Co. KG 完全消泡是形成一个出色涂膜的必要条件。吸附的空气、针孔会导致灰尘粘附并造成喷涂面漆和抛光操作困难。除了导致这些表面缺陷，它也经常会降低光泽和耐水性。Blister Free 77可相当大程度上减少气泡形成，造成强烈消泡，并均一地形成不饱和聚酯蜡层
BLISTER FREE 88 Bernd Schwegmann GmbH & Co. KG Blister Free 88是一种表面活性添加剂，会影响表面张力。该性能可减少在油漆的生产或施工过程中气泡的形成。任何形成的气泡都可被快速摧毁。通常Blister Free 88对涂膜流平具有良好的效果
DMAMP-80® ANGUS Chemical Company 安格斯化学公司 DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wet...展开 DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wettability and stability. This product is recommended for use as an emulsifying agent, corrosion inhibitor, resin solubilizer, catalyst, additive, and synthesis agent. 收起
FLEXITANE® CA 6000 ANGUS Chemical Company 安格斯化学公司 一种经过改进的万能专业涂料助剂，是一种有效的溶液，能够满足涂料配方的要求，减少特殊助剂的用量。
Hexabromocyclododecane Weifang Jahwa Chemical Co., Ltd. (Weifang Fengtai New Material Co., Ltd.) Hexabromocyclododecane, in the form of a white granular powder, is a cyclo-aliphatic flame retardant. This product can be used in adhesives, unsaturated polyester resins, and coatings.
HIKOREZ A-1100 Kolon HIKOREZ A-1100 is a pale yellow thermoplastic resin. This product can be used as tackifier for pressure sensitive adhesives. HIKOREZ A-1100 can be used as the binder for hot melt road marking as well as a binder for hot melt road marking.
HIKOREZ A-1100S Kolon HIKOREZ A-1100S is a pale yellow thermoplastic resin which is primarily used as tackifier for pressure sensitive adhesives.
HIKOREZ A-1115 Kolon HIKOREZ A-1115 is a pale yellow thermoplastic resin which is used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives.
HIKOREZ A-2115 Kolon HIKOREZ A-2115 is a pale yellow thermoplastic resin which is used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives.
HIKOREZ C-1100 Kolon HIKOREZ C-1100 is a pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The primary uses of this product are tackifier for pressure sensitive adhes...展开 HIKOREZ C-1100 is a pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The primary uses of this product are tackifier for pressure sensitive adhesive, binder for hot melt road marking and rubber compounding agent for tires, tubes, rubber coated clothes and etc. 收起
HIKOREZ H-2100 Kolon HIKOREZ H-2100 is a light color thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins/diolefins derived from the process of thermal cracking of naphtha. The primary applications are hot melt based pressure sensitive adhesive, hot me...展开 HIKOREZ H-2100 is a light color thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins/diolefins derived from the process of thermal cracking of naphtha. The primary applications are hot melt based pressure sensitive adhesive, hot melt adhesive, because of its good compatibility with base polymer such as Styrene Isoprene Styrene and Ethylene Vinyl Acetate. 收起
HIKOREZ H-2130 Kolon HIKOREZ H-2130 is a light color thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins/diolefins derived from the process of thermal cracking of naphtha. The primary applications are hot melt based pressure sensitive adhesive, hot me...展开 HIKOREZ H-2130 is a light color thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins/diolefins derived from the process of thermal cracking of naphtha. The primary applications are hot melt based pressure sensitive adhesive, hot melt adhesive, because it is compatible with base polymer such as Styrene Isoprene Styrene and Ethylene Vinyl Acetate. 收起
HIKOREZ H-2200 Kolon HIKOREZ H-2200 is a light color thermoplastic resin which is primarily used as hot melt based pressure sensitive adhesive. HIKOREZ H-2200 also can be used as tackifier for hot melt adhesives, because of its good compatibility with base polymer such as Sty...展开 HIKOREZ H-2200 is a light color thermoplastic resin which is primarily used as hot melt based pressure sensitive adhesive. HIKOREZ H-2200 also can be used as tackifier for hot melt adhesives, because of its good compatibility with base polymer such as Styrene Butadiene Styrene and Styrene Isoprene Styrene. 收起
HIKOREZ H-2300 Kolon HIKOREZ H-2300 is a light color thermoplastic resin which is primarily applied to hot melt based pressure sensitive adhesives. HIKOREZ H-2300 also can be used as tackifier for hot melt adhesives because of its compatibility with base polymer such as Ethyl...展开 HIKOREZ H-2300 is a light color thermoplastic resin which is primarily applied to hot melt based pressure sensitive adhesives. HIKOREZ H-2300 also can be used as tackifier for hot melt adhesives because of its compatibility with base polymer such as Ethylene Vinyl Acetate and Styrene Isoprene Styrene. 收起
HIKOREZ R-1095 Kolon HIKOREZ R-1095 is a pale yellow thermoplastic resinwhich is primarily used as a binder for hot melt road marking.
HIKOREZ R-1100S Kolon HIKOREZ R-1100S is a pale yellow thermoplastic which is used primarily as a binder for hot melt road marking.
HIKOREZ T-1080 Kolon HIKOREZ T-1080 is a pale yellow thermoplastic resin which is primarily used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives.
HIKOREZ T-1095 Kolon HIKOREZ T-1095 is a pale yellow thermoplastic resin which is primarily used as hot melt based pressure sensitive adhesives, especially Stryene-Isoprene-Styrene based PSA. HIKOREZ T-1095 also can be used as tackifier for hot melt adhesives.
HIKOREZ T-1100 Kolon HIKOREZ T-1100 is a pale yellow thermoplastic resin which is primarily used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives.
HIKOREZ T-2093 Kolon HIKOREZ T-2093 is a pale yellow thermoplastic resin which is primarily used as in hot melt based pressure sensitive adhesives, especially Stryene-Isoprene-Styrene based PSA. HIKOREZ T-2093 also can be used as tackifier for hot melt adhesives because of i...展开 HIKOREZ T-2093 is a pale yellow thermoplastic resin which is primarily used as in hot melt based pressure sensitive adhesives, especially Stryene-Isoprene-Styrene based PSA. HIKOREZ T-2093 also can be used as tackifier for hot melt adhesives because of its compatibility with base polymer such as EVA. 收起
HIKOREZ T-3100 Kolon HIKOREZ T-3100 is a modified aliphatic hydrocarbon resin. HIKOREZ T-3100 was developed for solvent based pressure sensitive adhesive tapes, hot melt pressure adhesives and hot melt adhesives.
HIKOTACK DP-100 Kolon HIKOTACK DP-100 is pale yellow thermoplastic resin. HIKOTACK DP-100 can be used as a vehicle for paint products as well as a tackifier for EVA based hot melt adhesives.
HIKOTACK P-110S Kolon HIKOTACK P-110S is a pale yellow thermoplastic resin which is primarily used as a vehicle in the coating industry and as a tackifier for Ethylene Vinyl Acetate based hot melt adhesives. HIKOTACK P-110S can be also used as water repellent agent, concrete c...展开 HIKOTACK P-110S is a pale yellow thermoplastic resin which is primarily used as a vehicle in the coating industry and as a tackifier for Ethylene Vinyl Acetate based hot melt adhesives. HIKOTACK P-110S can be also used as water repellent agent, concrete curing agent and binder for asphalt. 收起
HIKOTACK P-120H Kolon HIKOTACK P-120H is pale yellow thermoplastic resin which is primarily used as a modifying resin for paint & ink products and hot melt adhesives.
HIKOTACK P-120HS Kolon HIKOTACK P-120HS is pale yellow thermoplastic resin. HIKOTACK P-120HS has a relatively higher softening point than HIKOTACK P-120, and is mainly used as a vehicle for paint and ink products, water repellent agents, concrete curing agent and binder for asp...展开 HIKOTACK P-120HS is pale yellow thermoplastic resin. HIKOTACK P-120HS has a relatively higher softening point than HIKOTACK P-120, and is mainly used as a vehicle for paint and ink products, water repellent agents, concrete curing agent and binder for asphalt. 收起
HIKOTACK P-120P Kolon HIKOTACK P-120P is pale yellow thermoplastic resin which is primarily used as a vehicle for other chemicals in the coating industry and tackifier for Ethylene Vinyl Acetate based hot melt adhesives.
HIKOTACK P-120S Kolon HIKOTACK P-120S is pale yellow thermoplastic resin which is primarily used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives. HIKOTACK P-120S can be also used as water repellent agent, concrete curing agent, and binder for asphalt.
HIKOTACK P-140 Kolon HIKOTACK P-140 is pale yellow thermoplastic resin which is primarily used as a vehicle for printing ink. HIKOTACK P-140 is compatible with rosin modified phenolic resin, so it can be used with phenolic resin in off-set ink to decrease the set time and inc...展开 HIKOTACK P-140 is pale yellow thermoplastic resin which is primarily used as a vehicle for printing ink. HIKOTACK P-140 is compatible with rosin modified phenolic resin, so it can be used with phenolic resin in off-set ink to decrease the set time and increase the gloss. HIKOTACK P-140 can also be used as binder for color asphalt and tackifier for EVA based hot melt adhesives. 收起
HIKOTACK P-150 Kolon HIKOTACK P-150 is pale yellow thermoplastic resin which is primarily used as a vehicle for ink. HIKOTACK P-150 is compatible with rosin modified phenolic resin, which means it can be used with phenolic resin in off-set ink to decrease the set time and inc...展开 HIKOTACK P-150 is pale yellow thermoplastic resin which is primarily used as a vehicle for ink. HIKOTACK P-150 is compatible with rosin modified phenolic resin, which means it can be used with phenolic resin in off-set ink to decrease the set time and increase the gloss. 收起
HIKOTACK P-90 Kolon HIKOTACK P-90 is pale yellow thermoplastic resin that can be used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives, water repellent agent, concrete curing agent and binder for asphalt.
HIKOTACK P-90HS Kolon HIKOTACK P-90HS is pale yellow thermoplastic resin which is used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives, water repellent agent, concrete curing agent and binder for asphalt.
HIKOTACK P-90I Kolon HIKOTACK P-90I is pale yellow thermoplastic resin which is primarily used tackifier for Ethylene Vinyl Acetate copolymer based hot melt adhesives. HIKOTACK P-90I is compatible with numerous polymers as well as EVA, and provides good solubility with vario...展开 HIKOTACK P-90I is pale yellow thermoplastic resin which is primarily used tackifier for Ethylene Vinyl Acetate copolymer based hot melt adhesives. HIKOTACK P-90I is compatible with numerous polymers as well as EVA, and provides good solubility with various solvents. 收起
HIKOTACK P-90S Kolon HIKOTACK P-90S is pale yellow thermoplastic resin n be used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives, water repellent agent, concrete curing agent and binder for asphalt.
HIKOTACK(CIR) C-120 Kolon HIKOTACK(CIR) C-120 is a kind of thermoplastic aromatic resin which is used as vehicle for paint varnish and various types of ink.
HIKOTACK(CIR) C-90 Kolon HIKOTACK(CIR) C-90 is a kind of thermoplastic aromatic resin, which is produced through the polymerization of ingredients such as Styrene, Coumarone and Indenet. HIKOTACK(CIR) C-90 is mainly used in the rubber industry.
KORRODUR Bernd Schwegmann GmbH & Co. KG Korrodur主要作为一种锈转化助剂应用于常规醇酸树脂涂料中。然而，Korrodur在基于环氧、氯化橡胶或丙烯酸基料的含溶剂油漆中也有良好效果。典型应用：防锈底漆、单层防腐蚀体系、修补面漆
KORRODUR AL 2 Bernd Schwegmann GmbH & Co. KG Korrodur AL 2用于底漆中消除差的基材和差强人意的喷涂条件的影响。Korrodur AL 2可将残留的锈转换成非腐蚀性丹宁酸铁，并提供长期腐蚀保护。如果存在湿气，它会在喷涂过程中乳化进入膜中，干燥时会蒸发。润湿剂可确保对残留锈颗粒、灰尘的良好渗透以及对除油很差的表面的润湿
LA THIX FB Bernd Schwegmann GmbH & Co. KG 可增稠所有常规带极性基团基料的含溶剂体系。尤其适用于高膜厚体系、纹理烤漆、墙面和DIY油漆。主要优势为：液态，因此易添加、耐温、对光泽无负面影响、可防止沉降和流挂
MITTEL S Bernd Schwegmann GmbH & Co. KG Mittel S适用于几乎所有非水性体系，可高效应用于醇酸（自干）、醇酸/聚酯（热固化）、氯化橡胶、环氧、聚氨酯、热塑性丙烯酸和反应性丙烯酸体系
NIKANE® MS 3000 ANGUS Chemical Company 安格斯化学公司 一种性能独特的多功能溶剂，用于构成多种工业保养涂料体系中的溶剂型还原剂和冲淡剂。
NIKANE® MS 5000 ANGUS Chemical Company 安格斯化学公司 一种多功能溶剂，在溶剂型体系中有独特的性能。不但能够轻易地溶解各种材料，而且能够赋予溶解液以特性，因此得到了广泛的应用。
NO SED Bernd Schwegmann GmbH & Co. KG 防沉降助剂，适合溶剂型涂料
SCHWEGO ® Pur 8051 Bernd Schwegmann GmbH & Co. KG Schwego® Pur 8051是一种非离子型增稠剂，能有效改善水性涂料和清漆的流变性能。同时，Schwego®Pur 8051也可以与其它增稠剂配合使用而达到某种特别的效果。这种特别效果也取决于基料的种类。
SCHWEGO® Antimec Bernd Schwegmann GmbH & Co. KG Schwego® Antimec可用于几乎所有常规油漆体系，水性和溶剂型。而防结皮效果只对长油度醇酸树脂体系有效
SCHWEGO® corrit Bernd Schwegmann GmbH & Co. KG Schwego® Corrit主要作为一种锈转化助剂应用于水性油漆。典型应用：防锈底漆、单层防腐蚀体系、修补面漆
SCHWEGO® Everlast Bernd Schwegmann GmbH & Co. KG 基于螯合物的铁锈净化系统。轻微浆状的液体，可与中和的铁锈层形成金属有机离子复合物。该逐步形成的、黑色的、非常小巧的保护层可提供长期腐蚀耐久性，由于它含有成膜助剂，同时也是一个完美的底漆
SCHWEGO® Flow 8057 Bernd Schwegmann GmbH & Co. KG Schwego® Flow 8057可用于几乎所有水稀释涂料体系。不存在不相容性问题。
SCHWEGO® Flow 8058 Bernd Schwegmann GmbH & Co. KG Schwego® Flow 8058可用于几乎所有水稀释涂料体系。不存在不相容性问题。Schwego® Flow 8058仅含有水一种挥发性组分，使其特别适合用于无溶剂水稀释体系
SCHWEGO® Flow 8060 Bernd Schwegmann GmbH & Co. KG Schwego® Flow 8060可用于常规含溶剂或无溶剂涂料体系。一般来说，Schwego® Flow 8060对所有基料体系均有效，但它不适合用于水性涂料材料
SCHWEGO® Fluor 6523 Bernd Schwegmann GmbH & Co. KG 高效润湿助剂，用于溶剂型和水性涂料体系，可生物降解，不含PFOS和PFOA，基于C4技术
SCHWEGO® Fluor 6536 Bernd Schwegmann GmbH & Co. KG 高效润湿助剂，用于溶剂型和水性涂料体系，不含PFOS和PFOA，基于环保型C4、C6技术
SCHWEGO® Fluor 6543 Bernd Schwegmann GmbH & Co. KG 高效润湿助剂，用于溶剂型和水性涂料体系，不含PFOS和PFOA，基于环保型C4、C6技术
SCHWEGO® Foam 6303 Bernd Schwegmann GmbH & Co. KG Schwego® Foam 6303可用于含溶剂和水稀释体系。在含溶剂体系中，Schwego® Foam 6303作为消泡脱气剂尤为有效，也可部分作为流平剂。适合以下基料：醇酸、醇酸/聚酯、不饱和聚酯、NC-、AC-、PU和聚丙烯酸体系
SCHWEGO® Foam 6325 Bernd Schwegmann GmbH & Co. KG Schwego® Foam 6325是一种液体，是所有乳胶漆非常有效的消泡剂，尤其是对于基于苯乙烯/丁二烯乳胶和丙烯酸共聚物的乳胶漆。Schwego® Foam 6325在水中易乳化，不含硅
SCHWEGO® Foam 6343 Bernd Schwegmann GmbH & Co. KG 消泡剂，适合溶剂型涂料体系
SCHWEGO® Foam 6351 Bernd Schwegmann GmbH & Co. KG Schwego® Foam 6351可用于几乎所有无溶剂和含溶剂涂料体系。在锤纹罩面漆、建筑涂料、反应性厚涂膜体系、重着色涂料体系和配方中特别有效，适用于无气喷涂。Schwego® Foam 6351在水性工业漆（醇酸/三聚氰胺体系）中也有效果
SCHWEGO® Foam 6354 Bernd Schwegmann GmbH & Co. KG Schwego® Foam 6354对几乎所有含溶剂的单和多组分油漆和涂料体系都有效。它的主要组成为：自干和烘烤醇酸、环氧体系、PU体系和丙烯酸
SCHWEGO® Foam 6356 Bernd Schwegmann GmbH & Co. KG Schwego® Foam 6356是一种界面活性产品，可抑制空气附着，并在涂膜干燥前摧毁气泡。因而可阻止缩孔形成。涂膜弹性得以提高
SCHWEGO® Foam 6360 Bernd Schwegmann GmbH & Co. KG Schwego® Foam 6360是一种带界面活性的产品，可消除UV涂料中吸附空气的形成。也就是说，气泡在涂膜干燥前就被消除。可防止缩孔，促进流平
SCHWEGO® Foam 6361 Bernd Schwegmann GmbH & Co. KG Schwego® Foam 6361是一种带有界面活性的产品，可消除UV涂料中吸附空气的形成。也就是说，气泡在涂膜干燥前就被消除。可防止缩孔，促进流平
SCHWEGO® Foam 6375 Bernd Schwegmann GmbH & Co. KG Schwego® Foam 6375在常规NC体系和NC组合体系、 AC和环氧体系、PU和自干丙烯酸体系中具有良好的消泡作用。Schwego® Foam 6375在基于以下基料：长油度醇酸、中油度醇酸、丙烯酸酯/中油度醇酸、丙烯酸酯/长油度醇酸、环氧的水稀释涂料体系中具有良好到非常好的消泡效果
SCHWEGO® Foam 6377 Bernd Schwegmann GmbH & Co. KG 完全消泡是形成一个无缺陷涂膜的必要条件。吸附的空气、针孔会导致灰尘粘附并造成喷涂面漆和抛光操作困难。除了导致这些表面缺陷，它也经常会降低光泽和耐水性。Schwego® Foam 6377可相当大程度上减少气泡形成，造成强烈消泡，并均一地形成不饱和聚酯蜡层
SCHWEGO® Foam 6388 Bernd Schwegmann GmbH & Co. KG Schwego® Foam 6388是一种界面活性添加剂，可影响表面张力。该特性可最大程度减少油漆生产或施工过程中气泡的形成。所有形成的气泡都可被快速消除。一般来说，Schwego® Foam 6388有助于漆膜的流平
SCHWEGO® foam 6390 Bernd Schwegmann GmbH & Co. KG SCHWEGO® foam 6390是一种用于水性涂料系统的消泡剂。它在水性介质的防范，控制和去除泡沫方面效率很高，因此可以在几乎所有水基油漆和涂料中使用。这款产品适用于需要高纯度水平的工业应用中，也在食品行业中有多种应用。
SCHWEGO® Foam 8013 Bernd Schwegmann GmbH & Co. KG Schwego® Foam 8013是一种液体、高效消泡剂，适用于所有水性体系和胶粘剂，特别是基于聚氨酯和丙烯酸酯的水性体系和胶粘剂。 Schwego® Foam 8013易乳化，不含硅
SCHWEGO® Foam 8025 Bernd Schwegmann GmbH & Co. KG 非常有效的液体消泡剂，用于乳胶漆。尤其适合用于苯乙烯/丁二烯乳胶和丙烯酸共聚物。已乳化于水中。可用于乳胶漆、水性涂料、硅酸盐涂料、胶粘剂和灰泥
SCHWEGO® Foam 8325 Bernd Schwegmann GmbH & Co. KG Schwego® Foam 8325是一种液体、高效消泡剂，适用于所有乳胶漆，特别是基于苯乙烯/丁二烯乳胶和丙烯酸共聚物的乳胶漆。Schwego® Foam 8325在水中易乳化，不含硅
SCHWEGO® Foam 8333 Bernd Schwegmann GmbH & Co. KG Schwego® Foam 8333特别适用于基于聚氨酯、聚酯及其混合体系的消泡。它可有效用作消泡剂和脱气剂。Schwego® Foam 8333不含硅
SCHWEGO® Foam 8336 Bernd Schwegmann GmbH & Co. KG Schwego® Foam 8336消泡剂，适用于所有类型的涂料，不含颜料或者仅含少量颜料、印刷油墨和UV固化体系，特别是含丙烯酸的体系。在木器清漆和胶粘剂中也具有非常好的消泡脱气效果
SCHWEGO FOAM EL 2013 Bernd Schwegmann GmbH & Co. KG SCHWEGO FOAM EL 2013是一种用于溶剂型涂料系统的消泡剂。它可以减少表面张力，所以可以在多数溶剂型系统中显示高消泡能力。它可以在生产和应用过程中破坏泡沫。小量使用SCHWEGO FOAM EL 2013就可以防止泡沫在烤瓷和烘漆过程中产生。这款产品几乎适用于所有溶剂型系统，罐头涂料，醇酸树脂（风干），醇酸树脂/聚酯（热烘干），氯化橡胶，环氧化物，聚氨酯，热塑性丙烯酸和反应性丙烯酸树脂系统。
SCHWEGO® Mar 6542 Bernd Schwegmann GmbH & Co. KG 滑爽助剂，用于水性和UV固化涂料体系，润湿助剂。可改善抗划伤、耐磨损性能和防粘连性能。也可改善滑爽度，形成平滑表面，从而提高涂膜硬度
SCHWEGO® Mar 6561 Bernd Schwegmann GmbH & Co. KG Schwego® Mar 6561添加剂，应用于UV涂料，可改善耐磨损和抗刮伤性能，增加防粘连性能，改进滑爽度并增加硬度。此外，可改善UV体系的相容性。可减少灰尘粘附和起泡倾向。Schwego® Mar 6561不会影响光泽
SCHWEGO® Mar 6562 Bernd Schwegmann GmbH & Co. KG Schwego® Mar 6562添加剂，应用于UV涂料，可改善耐磨损和抗刮伤性能，增加防粘连性能，改进滑爽度并增加硬度。此外，可改善UV体系的相容性，增加重涂性。可减少灰尘粘附和起泡倾向。Schwego® Mar 6562不会影响光泽
SCHWEGO® Mar 8300 Bernd Schwegmann GmbH & Co. KG Schwego® Mar 8300主要用于常规自干和烘干漆。因为其组分，Schwego® Mar 8300可用于大部分基料体系。有时与含羟基的基料会不相容
SCHWEGO® Mar 8301 Bernd Schwegmann GmbH & Co. KG Schwego® Mar 8301主要用于自干和烘烤水稀释涂料。Schwego® Mar 8301在常规涂料体系中也具有良好的作用。因为其组分，Schwego® Mar 8301可用于大部分基料体系
SCHWEGO® Mar 8304 Bernd Schwegmann GmbH & Co. KG Schwego® Mar 8304适用于溶剂型体系，基料类型：自干醇酸、醇酸/三聚氰胺组合、聚氨酯、硝化纤维、酸固化三聚氰胺和尿素体系、无油聚酯
SCHWEGO® Mar 8305 Bernd Schwegmann GmbH & Co. KG Schwego® Mar 8305适用于水稀释体系，基料类型：自干醇酸、醇酸/三聚氰胺组合、自交联和添加剂交联聚丙烯酸树酯、聚氨酯、硝化纤维体系、酸硬化蜜胺和尿素树脂、无油聚酯
SCHWEGO® Mar 8310 Bernd Schwegmann GmbH & Co. KG 滑爽和流平助剂，用于水性涂料体系。可改善滑爽度，形成均一表面，从而提高涂膜硬度。可减小粘灰可能性，减小气泡形成，保持光泽
SCHWEGO® Mar 8311 Bernd Schwegmann GmbH & Co. KG SCHWEGO® Mar 8311 is a slip and leveling additive for solvent borne coating systems. The addition of this product to solvent borne coating systems improves scratch, mar and blocking resistance. SCHWEGO® Mar 8311 improves slip, therefore even surface is fo...展开 SCHWEGO® Mar 8311 is a slip and leveling additive for solvent borne coating systems. The addition of this product to solvent borne coating systems improves scratch, mar and blocking resistance. SCHWEGO® Mar 8311 improves slip, therefore even surface is formed and hence also film hardness increased. The tendency to dirt retention is diminished, disposition to foaming is reduced and gloss is conserved. 收起
SCHWEGO® Pur 8020 Bernd Schwegmann GmbH & Co. KG Schwego® Pur 8020适用于内墙和外墙涂料，也可用于基于聚丙烯酸、苯乙烯共聚物、PU乳液或水稀释醇酸体系的合成树脂打底和涂抹化合物或浆状填料。与丙烯酸或纤维素基增稠剂相比，它具有高保光性，尤其在高光乳胶漆中
SCHWEGO® Pur 8050 Bernd Schwegmann GmbH & Co. KG Schwego® Pur 8050适用于内部和外部砖石漆、水性涂料和防腐蚀涂料、改性树脂灰泥和填料。与丙烯酸和纤维素基增稠剂相比，它在高光乳胶漆中具有高保光性
SCHWEGO® therm Bernd Schwegmann GmbH & Co. KG SCHWEGO® therm 是一种用于溶剂型涂料体系的湿润添加剂。在涂料体系中添加这款产品可以在增加涂膜指甲硬度的同时减少烘干时间或者降低烘干温度等。SCHWEGO® therm提供更经济，更高质量的加工过程。这款产品可用于多种溶剂型系统，如金属饰面和木饰面。
SCHWEGO® Wett 6237 Bernd Schwegmann GmbH & Co. KG Schwego® Wett 6237可用于所有类型水稀释体系，例如：乳液、乳胶、混合体系、中和体系、适用于有机和无机颜料