成功!

成功保存搜索结果

Baker Hughes

Visit Company Website
Baker Hughes specialty polymers offer solutions for five markets: plastics additives, imaging and coatings, candles, adhesives, and personal care. The olefin-based, low-molecular weight polymers and waxes improve the performance, use, and production of our customers’ products. Baker Hughes' polymer and wax additives ensure coatings, inks, and toners perform best. These additives cover melt and functional chemistries for liquid- and solid-phase applications.
CARDIS™ 36 Baker Hughes (Baker Petrolite - Coatings) CARDIS™ 36 is an oxidized wax with low molecular weight used in imaging and coatings applications. CARDIS™ 36 has a melting point of 91 and a viscosity of 30 at 99°C. This product is used to emulsify into water-based systems, act as a co-emulsifier for hy...展开 CARDIS™ 36 is an oxidized wax with low molecular weight used in imaging and coatings applications. CARDIS™ 36 has a melting point of 91 and a viscosity of 30 at 99°C. This product is used to emulsify into water-based systems, act as a co-emulsifier for hydrocarbon waxes, provide reactive sites and improve solubility in polar solvents and resins. 收起
CERAMER™ 1251 Baker Hughes (Baker Petrolite - Coatings) CERAMER™ 1251 polymer is formed by grafting maleic anhydride derivatives onto hydrocarbon polymers in a manner that adds high levels of acid and ester functionality without significantly degrading the hydrocarbon backbone. CERAMER™ 1251 polymer has a melt...展开 CERAMER™ 1251 polymer is formed by grafting maleic anhydride derivatives onto hydrocarbon polymers in a manner that adds high levels of acid and ester functionality without significantly degrading the hydrocarbon backbone. CERAMER™ 1251 polymer has a melting point of 79 and a saponification number of 156. Despite a higher acid number than oxidized products, they are much harder with higher melting points. It is used in imaging and coatings applications to promote adhesion and bonding in thermal transfer inks, as a dispersant for pigments in thermal transfer inks and coatings, as a compatibilizer for polyolefin waxes into polyester and styrene-acrylic toners, and to promote low coefficient of friction in polishes. 收起
CERAMER™ 1608 Baker Hughes (Baker Petrolite - Coatings) CERAMER™ 1608 polymer is formed by grafting maleic anhydride derivatives onto hydrocarbon polymers in a manner that adds high levels of acid and ester functionality without significantly degrading the hydrocarbon backbone. CERAMER™ 1608 polymer has a melt...展开 CERAMER™ 1608 polymer is formed by grafting maleic anhydride derivatives onto hydrocarbon polymers in a manner that adds high levels of acid and ester functionality without significantly degrading the hydrocarbon backbone. CERAMER™ 1608 polymer has a melting point of 75 and a saponification number of 215. Despite a higher acid number than oxidized products, they are much harder with higher melting points. It is used in imaging and coatings applications to promote adhesion and bonding in thermal transfer inks, as a dispersant for pigments in thermal transfer inks and coatings, as a compatibilizer for polyolefin waxes into polyester and styrene-acrylic toners, and to promote low coefficient of friction in polishes. 收起
CERAMER™ 67 Baker Hughes (Baker Petrolite - Coatings) CERAMER™ 67 polymer is formed by grafting maleic anhydride derivatives onto hydrocarbon polymers in a manner that adds high levels of acid and ester functionality without significantly degrading the hydrocarbon backbone. CERAMER™ 67 polymer has a melting ...展开 CERAMER™ 67 polymer is formed by grafting maleic anhydride derivatives onto hydrocarbon polymers in a manner that adds high levels of acid and ester functionality without significantly degrading the hydrocarbon backbone. CERAMER™ 67 polymer has a melting point of 96 and a saponification number of 77. Despite a higher acid number than oxidized products, they are much harder with higher melting points. It is used in imaging and coatings applications to promote adhesion and bonding in thermal transfer inks, as a dispersant for pigments in thermal transfer inks and coatings, as a compatibilizer for polyolefin waxes into polyester and styrene-acrylic toners, and to promote low coefficient of friction in polishes. 收起
DIAX™ 2770 Baker Hughes (Baker Petrolite - Coatings) DIAX™ 2770 is a hyperbranched hydrocarbon polymer that is a liquid at room temperature used in imaging and coatings applications. When used in solvent based coating and ink formulations, DIAX 2770 polymer promotes surface quality by reducing defects assoc...展开 DIAX™ 2770 is a hyperbranched hydrocarbon polymer that is a liquid at room temperature used in imaging and coatings applications. When used in solvent based coating and ink formulations, DIAX 2770 polymer promotes surface quality by reducing defects associated with foaming. Product is intended for use in polyester, PVDC, and epoxy based systems. The purpose of the product is to reduce surface defects of coatings and inks while being soluble in common coating and ink solvents and being easily incorporated in coating and inks systems. 收起
PETROLITE C-7500 Baker Hughes (Baker Petrolite - Coatings) PETROLITE™ C-7500 is an oxidized polymer with low molecular weight used in imaging and coatings applications. PETROLITE™ C-7500 has a melting point of 97 and a viscosity of 70 at 116°C. This product is used to emulsify into water-based systems, act as a c...展开 PETROLITE™ C-7500 is an oxidized polymer with low molecular weight used in imaging and coatings applications. PETROLITE™ C-7500 has a melting point of 97 and a viscosity of 70 at 116°C. This product is used to emulsify into water-based systems, act as a co-emulsifier for hydrocarbon waxes, provide reactive sites and improve solubility in polar solvents and resins. 收起
PETROLITE™ C-8500 Baker Hughes (Baker Petrolite - Coatings) PETROLITE™ C-8500 is an oxidized polymer with low molecular weight used in imaging and coatings applications. PETROLITE™ C-8500 has a melting point of 95 and a viscosity of 40 at 116°C. This product is used to emulsify into water-based systems, act as a c...展开 PETROLITE™ C-8500 is an oxidized polymer with low molecular weight used in imaging and coatings applications. PETROLITE™ C-8500 has a melting point of 95 and a viscosity of 40 at 116°C. This product is used to emulsify into water-based systems, act as a co-emulsifier for hydrocarbon waxes, provide reactive sites and improve solubility in polar solvents and resins. 收起
PETROLITE™ C-9500 Baker Hughes (Baker Petrolite - Coatings) PETROLITE™ C-9500 is an oxidized polymer with low molecular weight used in imaging and coatings applications. PETROLITE™ C-9500 has a melting point of 95 and a viscosity of 16 at 116°C. This product is used to emulsify into water-based systems, act as a c...展开 PETROLITE™ C-9500 is an oxidized polymer with low molecular weight used in imaging and coatings applications. PETROLITE™ C-9500 has a melting point of 95 and a viscosity of 16 at 116°C. This product is used to emulsify into water-based systems, act as a co-emulsifier for hydrocarbon waxes, provide reactive sites and improve solubility in polar solvents and resins. 收起
PETROLITE™ D-1038 Baker Hughes (Baker Petrolite - Coatings) PETROLITE™ D-1038 is a dispersant used in imaging and coatings applications to disperse a variety of pigments in water based coating and ink systems. This dispersant is based on an ethoxylated polymer with an HLB of 18. PETROLITE™ D-1038 is VOC free and h...展开 PETROLITE™ D-1038 is a dispersant used in imaging and coatings applications to disperse a variety of pigments in water based coating and ink systems. This dispersant is based on an ethoxylated polymer with an HLB of 18. PETROLITE™ D-1038 is VOC free and has a viscosity of 30. 收起
PETROLITE™ E-2020 Baker Hughes (Baker Petrolite - Coatings) PETROLITE™ E-2020 is an oxidized polymer with low molecular weight used in imaging and coatings applications. PETROLITE™ E-2020 has a melting point of 116 and a viscosity of 75 at 149°C. This product is used to emulsify into water-based systems, act as a ...展开 PETROLITE™ E-2020 is an oxidized polymer with low molecular weight used in imaging and coatings applications. PETROLITE™ E-2020 has a melting point of 116 and a viscosity of 75 at 149°C. This product is used to emulsify into water-based systems, act as a co-emulsifier for hydrocarbon waxes, provide reactive sites and improve solubility in polar solvents and resins. 收起
PETROLITE™ EP-700 Baker Hughes (Baker Petrolite - Coatings) PETROLITE™ EP-700 is a copolymer of propylene and ethylene. The addition of propylene results in short chain branching, which reduces the polymer’s crystallinity. PETROLITE™ EP-700 has a melting point of 96 and a viscosity of 12 at 99°C. This copolymer ha...展开 PETROLITE™ EP-700 is a copolymer of propylene and ethylene. The addition of propylene results in short chain branching, which reduces the polymer’s crystallinity. PETROLITE™ EP-700 has a melting point of 96 and a viscosity of 12 at 99°C. This copolymer has a narrow molecular weight distribution and the branching provides a more flexible and softer polymer with solvent solubility. The targeted end uses of this copolymer is to promote anti-block, release aid, and slip aid in thermoplastic elastomers and for hot melt adhesives applications. 收起
PETRONAUBA™ C Baker Hughes (Baker Petrolite - Coatings) PETRONAUBA™ C is an oxidized polymer with low molecular weight used in imaging and coatings applications. PETRONAUBA™ C has a melting point of 93 and a viscosity of 26 at 99°C. This product is used to emulsify into water-based systems, act as a co-emulsif...展开 PETRONAUBA™ C is an oxidized polymer with low molecular weight used in imaging and coatings applications. PETRONAUBA™ C has a melting point of 93 and a viscosity of 26 at 99°C. This product is used to emulsify into water-based systems, act as a co-emulsifier for hydrocarbon waxes, provide reactive sites and improve solubility in polar solvents and resins. 收起
POLYWAX™ 1000 Baker Hughes (Baker Petrolite - Coatings) POLYWAX™ 1000 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 1000 has a melting point of 113 and a viscosity of 15. It exhibits a sharp melting point, fast recrystalliz...展开 POLYWAX™ 1000 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 1000 has a melting point of 113 and a viscosity of 15. It exhibits a sharp melting point, fast recrystallization, low melt viscosity, heat stability, and resistance to chemical attack. The end uses for this product include anti-block, release aid, scratch and mar, slip aid, and thermal viscosity control. 收起
POLYWAX™ 2000 Baker Hughes (Baker Petrolite - Coatings) POLYWAX™ 2000 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 2000 has a melting point of 126 and a viscosity of 55. It exhibits a sharp melting point, fast recrystalliz...展开 POLYWAX™ 2000 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 2000 has a melting point of 126 and a viscosity of 55. It exhibits a sharp melting point, fast recrystallization, low melt viscosity, heat stability, and resistance to chemical attack. The end uses for this product include anti-block, release aid, scratch and mar, slip aid, and thermal viscosity control. 收起
POLYWAX™ 3000 Baker Hughes (Baker Petrolite - Coatings) POLYWAX™ 3000 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 3000 has a melting point of 129 and a viscosity of 130. It exhibits a sharp melting point, fast recrystalli...展开 POLYWAX™ 3000 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 3000 has a melting point of 129 and a viscosity of 130. It exhibits a sharp melting point, fast recrystallization, low melt viscosity, heat stability, and resistance to chemical attack. The end uses for this product include anti-block, release aid, scratch and mar, slip aid, and thermal viscosity control. 收起
POLYWAX™ 400 Baker Hughes (Baker Petrolite - Coatings) POLYWAX™ 400 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 400 has a melting point of 81 and a viscosity of 7. It exhibits a sharp melting point, fast recrystallizatio...展开 POLYWAX™ 400 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 400 has a melting point of 81 and a viscosity of 7. It exhibits a sharp melting point, fast recrystallization, low melt viscosity, heat stability, and resistance to chemical attack. The end uses for this product include anti-block, release aid, scratch and mar, slip aid, and thermal viscosity control. 收起
POLYWAX™ 500 Baker Hughes (Baker Petrolite - Coatings) POLYWAX™ 500 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 500 has a melting point of 88 and a viscosity of 8.5. It exhibits a sharp melting point, fast recrystallizat...展开 POLYWAX™ 500 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 500 has a melting point of 88 and a viscosity of 8.5. It exhibits a sharp melting point, fast recrystallization, low melt viscosity, heat stability, and resistance to chemical attack. The end uses for this product include anti-block, release aid, scratch and mar, slip aid, and thermal viscosity control. 收起
POLYWAX™ 600 Baker Hughes (Baker Petrolite - Coatings) POLYWAX™ 600 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 600 has a melting point of 94 and a viscosity of 10. It exhibits a sharp melting point, fast recrystallizati...展开 POLYWAX™ 600 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 600 has a melting point of 94 and a viscosity of 10. It exhibits a sharp melting point, fast recrystallization, low melt viscosity, heat stability, and resistance to chemical attack. The end uses for this product include anti-block, release aid, scratch and mar, slip aid, and thermal viscosity control. 收起
POLYWAX™ 655 Baker Hughes (Baker Petrolite - Coatings) POLYWAX™ 655 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 655 has a melting point of 99 and a viscosity of 7. It exhibits a sharp melting point, fast recrystallizatio...展开 POLYWAX™ 655 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 655 has a melting point of 99 and a viscosity of 7. It exhibits a sharp melting point, fast recrystallization, low melt viscosity, heat stability, and resistance to chemical attack. The end uses for this product include anti-block, release aid, scratch and mar, slip aid, and thermal viscosity control. 收起
POLYWAX™ 725 Baker Hughes (Baker Petrolite - Coatings) POLYWAX™ 725 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 725 has a melting point of 104 and a viscosity of 10. It exhibits a sharp melting point, fast recrystallizat...展开 POLYWAX™ 725 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 725 has a melting point of 104 and a viscosity of 10. It exhibits a sharp melting point, fast recrystallization, low melt viscosity, heat stability, and resistance to chemical attack. The end uses for this product include anti-block, release aid, scratch and mar, slip aid, and thermal viscosity control. 收起
POLYWAX™ 850 Baker Hughes (Baker Petrolite - Coatings) POLYWAX™ 850 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 850 has a melting point of 107 and a viscosity of 10. It exhibits a sharp melting point, fast recrystallizat...展开 POLYWAX™ 850 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 850 has a melting point of 107 and a viscosity of 10. It exhibits a sharp melting point, fast recrystallization, low melt viscosity, heat stability, and resistance to chemical attack. The end uses for this product include anti-block, release aid, scratch and mar, slip aid, and thermal viscosity control. 收起
UNICID™ 350 Baker Hughes (Baker Petrolite - Coatings) UNICID™ 350 is a long chain, linear primary carboxylic acid used in imaging and coatings applications. UNICID™ 350 has a melting point of 92 and a viscosity of 4. The purpose of UNICID™ 350 is to compatibilize with functional/polar polymers, increase adhe...展开 UNICID™ 350 is a long chain, linear primary carboxylic acid used in imaging and coatings applications. UNICID™ 350 has a melting point of 92 and a viscosity of 4. The purpose of UNICID™ 350 is to compatibilize with functional/polar polymers, increase adhesion to polar surfaces, disperse in water, act as a co-emulsifier in anionic systems, and react to create unique derivatives. The carbon backbone of this acid allows it to manage odor and volatility and form films in water-in-oil emulsions. 收起
UNICID™ 550 Baker Hughes (Baker Petrolite - Coatings) UNICID™ 550 is a long chain, linear primary carboxylic acid used in imaging and coatings applications. UNICID™ 550 has a melting point of 101 and a viscosity of 8. The purpose of UNICID™ 550 is to compatibilize with functional/polar polymers, increase adh...展开 UNICID™ 550 is a long chain, linear primary carboxylic acid used in imaging and coatings applications. UNICID™ 550 has a melting point of 101 and a viscosity of 8. The purpose of UNICID™ 550 is to compatibilize with functional/polar polymers, increase adhesion to polar surfaces, disperse in water, act as a co-emulsifier in anionic systems, and react to create unique derivatives. The carbon backbone of this acid allows it to manage odor and volatility and form films in water-in-oil emulsions. 收起
UNICID™ 700 Baker Hughes (Baker Petrolite - Coatings) UNICID™ 700 is a long chain, linear primary carboxylic acid used in imaging and coatings applications. UNICID™ 700 has a melting point of 110 and a viscosity of 12. The purpose of UNICID™ 700 is to compatibilize with functional/polar polymers, increase ad...展开 UNICID™ 700 is a long chain, linear primary carboxylic acid used in imaging and coatings applications. UNICID™ 700 has a melting point of 110 and a viscosity of 12. The purpose of UNICID™ 700 is to compatibilize with functional/polar polymers, increase adhesion to polar surfaces, disperse in water, act as a co-emulsifier in anionic systems, and react to create unique derivatives. The carbon backbone of this acid allows it to manage odor and volatility and form films in water-in-oil emulsions. 收起
UNILIN™ 350 Baker Hughes (Baker Petrolite - Coatings) UNILIN™ 350 is a fully saturated, long chain, linear primary alcohol used in imaging and coatings applications. UNILIN™ 350 has a melting point of 78 and a viscosity of 3. The function of this alcohol is to compatibilize with polar polymers and react to f...展开 UNILIN™ 350 is a fully saturated, long chain, linear primary alcohol used in imaging and coatings applications. UNILIN™ 350 has a melting point of 78 and a viscosity of 3. The function of this alcohol is to compatibilize with polar polymers and react to form derivatives. The linear carbon backbone of this alcohol is designed for compatibility with hydrocarbons and to provide solvent resistance in coatings. The low polydispersity of this product controls the melting point while lowering the melt viscosity. 收起
UNILIN™ 425 Baker Hughes (Baker Petrolite - Coatings) UNILIN™ 425 is a fully saturated, long chain, linear primary alcohol used in imaging and coatings applications. UNILIN™ 425 has a melting point of 91 and a viscosity of 4. The function of this alcohol is to compatibilize with polar polymers and react to f...展开 UNILIN™ 425 is a fully saturated, long chain, linear primary alcohol used in imaging and coatings applications. UNILIN™ 425 has a melting point of 91 and a viscosity of 4. The function of this alcohol is to compatibilize with polar polymers and react to form derivatives. The linear carbon backbone of this alcohol is designed for compatibility with hydrocarbons and to provide solvent resistance in coatings. The low polydispersity of this product controls the melting point while lowering the melt viscosity. 收起
UNILIN™ 550 Baker Hughes (Baker Petrolite - Coatings) UNILIN™ 550 is a fully saturated, long chain, linear primary alcohol used in imaging and coatings applications. UNILIN™ 550 has a melting point of 99 and a viscosity of 6. The function of this alcohol is to compatibilize with polar polymers and react to f...展开 UNILIN™ 550 is a fully saturated, long chain, linear primary alcohol used in imaging and coatings applications. UNILIN™ 550 has a melting point of 99 and a viscosity of 6. The function of this alcohol is to compatibilize with polar polymers and react to form derivatives. The linear carbon backbone of this alcohol is designed for compatibility with hydrocarbons and to provide solvent resistance in coatings. The low polydispersity of this product controls the melting point while lowering the melt viscosity. 收起
UNILIN™ 700 Baker Hughes (Baker Petrolite - Coatings) UNILIN™ 700 is a fully saturated, long chain, linear primary alcohol used in imaging and coatings applications. UNILIN™ 700 has a melting point of 105 and a viscosity of 8. The function of this alcohol is to compatibilize with polar polymers and react to ...展开 UNILIN™ 700 is a fully saturated, long chain, linear primary alcohol used in imaging and coatings applications. UNILIN™ 700 has a melting point of 105 and a viscosity of 8. The function of this alcohol is to compatibilize with polar polymers and react to form derivatives. The linear carbon backbone of this alcohol is designed for compatibility with hydrocarbons and to provide solvent resistance in coatings. The low polydispersity of this product controls the melting point while lowering the melt viscosity. 收起
VYBAR™ C-6112 Baker Hughes (Baker Petrolite - Coatings) VYBAR™ C-6112 is a polymer that combines acid functionality with a hyberbranched structure for use in imaging and coatings applications. The acid functionality allows for compatibility in polar systems, adhesion to polar surfaces, and the ability to emuls...展开 VYBAR™ C-6112 is a polymer that combines acid functionality with a hyberbranched structure for use in imaging and coatings applications. The acid functionality allows for compatibility in polar systems, adhesion to polar surfaces, and the ability to emulsify with neutralization. The hyperbranched structure allows VYBAR™ C-6112 to act as an oil binder for high oil content waxes and a crystal modifier for polymers and waxes. 收起