| 1,4-Butanediol (1,4-BDO) | DCC (Dairen Chemical Corp.) | 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manuf...展开 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manufacturing carrier solvent in printing ink, and is a key component of hot melt adhesive. 收起 | |
| 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propan...展开 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propanediol is used as a raw material in monomers for the preparation of coatings and binders. 收起 | |
| Acrylated Amine Oligomer SZ 225 | Soltech Ltd | Acrylated Amine Oligomer SZ 225 is an acrylate functional oligomeric amine resin designed to provide low viscosity, pigment wetting, adhesion, and high gloss. Common applications of this product include plastic coatings, plastic adhesives, screen ink vehi...展开 Acrylated Amine Oligomer SZ 225 is an acrylate functional oligomeric amine resin designed to provide low viscosity, pigment wetting, adhesion, and high gloss. Common applications of this product include plastic coatings, plastic adhesives, screen ink vehicles, clear paper coatings, wood coatings, and wood fillers. Acrylated Amine Oligomer SZ 225 is 100% polymer solid by weight with a viscosity of 500-1,100 at 25℃. 收起 | |
| Acrylic Acrylate SA 3710 | Soltech Ltd | Acrylic Acrylate SA 3710 is an acrylic oligomer diluted with 60% of 1,6 hexanediol diacrylate that is designed to provide substrate adhesion, exterior durability, and light color. This product is commonly applied in clear plastic coatings and silk screen ...展开 Acrylic Acrylate SA 3710 is an acrylic oligomer diluted with 60% of 1,6 hexanediol diacrylate that is designed to provide substrate adhesion, exterior durability, and light color. This product is commonly applied in clear plastic coatings and silk screen inks. Acrylic Acrylate SA 3710 is 40% polymer solid by weight with a viscosity of 18,000-30,000 at 25℃. 收起 | |
| Adhesion Promoter SZ 9166 | Soltech Ltd | Adhesion Promoter SZ 9166 is a silicon acrylate designed to provide light color, low viscosity, light color, adhesion, low odor, and stability. Common applications of this product include UV cure coatings and EB cure coatings. Adhesion Promoter SZ 9166 is...展开 Adhesion Promoter SZ 9166 is a silicon acrylate designed to provide light color, low viscosity, light color, adhesion, low odor, and stability. Common applications of this product include UV cure coatings and EB cure coatings. Adhesion Promoter SZ 9166 is 100% polymer solid by weight with a viscosity of 1,800-3,600 at 25℃. 收起 | |
| Adhesion Promoter SZ 9167 | Soltech Ltd | Adhesion Promoter SZ 9167 is an acrylate modified acidic adhesion promoter designed to provide light color, low viscosity, adhesion, high reactivity, and stability. Common applications of this product include UV cure coatings and EB cure coatings. Adhesio...展开 Adhesion Promoter SZ 9167 is an acrylate modified acidic adhesion promoter designed to provide light color, low viscosity, adhesion, high reactivity, and stability. Common applications of this product include UV cure coatings and EB cure coatings. Adhesion Promoter SZ 9167 is 100% polymer solid by weight with a viscosity of 2,000-4,000 at 25℃. 收起 | |
| Aliphatic Urethane Acrylate SU 500 | Soltech Ltd | Aliphatic Urethane Acrylate SU 500 is a aliphatic urethane diacrylate containing isobornyl acrylate that is designed to provide adhesion, a light color, flexibility, and toughness. Common applications of this product include screen inks, plastic coatings,...展开 Aliphatic Urethane Acrylate SU 500 is a aliphatic urethane diacrylate containing isobornyl acrylate that is designed to provide adhesion, a light color, flexibility, and toughness. Common applications of this product include screen inks, plastic coatings, overprint varnishes, adhesives, and wood flooring. Aliphatic Urethane Acrylate SU 500 is 78% polymer solid by weight with a mPa.s viscosity of 1,200-2,000 at 60℃. 收起 | |
| Aliphatic Urethane Acrylate SU 5020 | Soltech Ltd | Aliphatic Urethane Acrylate SU 5020 is a aliphatic urethane acrylate containing butyl acetate that is designed to provide a fast curing response, stain resistance, hardness, light color, and transparency. Common applications of this product include plasti...展开 Aliphatic Urethane Acrylate SU 5020 is a aliphatic urethane acrylate containing butyl acetate that is designed to provide a fast curing response, stain resistance, hardness, light color, and transparency. Common applications of this product include plastic coatings, vinyl flooring, and clear coatings. Aliphatic Urethane Acrylate SU 5020 is 74% polymer solid by weight with a mPa.s viscosity of 600-3,000 at 60℃. 收起 | |
| Aliphatic Urethane Acrylate SU 5030 | Soltech Ltd | Aliphatic Urethane Acrylate SU 5030 is a aliphatic urethane acrylate containing butyl acetate that is designed to provide a fast curing response, stain resistance, hardness, light color, and transparency. Common applications of this product include plasti...展开 Aliphatic Urethane Acrylate SU 5030 is a aliphatic urethane acrylate containing butyl acetate that is designed to provide a fast curing response, stain resistance, hardness, light color, and transparency. Common applications of this product include plastic coatings, vinyl flooring, and clear coatings. Aliphatic Urethane Acrylate SU 5030 is 69% polymer solid by weight with a mPa.s viscosity of 2,000-5,000 at 60℃. 收起 | |
| Aliphatic Urethane Acrylate SU 5039 | Soltech Ltd | Aliphatic Urethane Acrylate SU 5039 is a nona-functional aliphatic urethane acrylate oligomer that is designed to provide a fast curing response, abrasion resistance, stain resistance, hardness, and light color. Common applications of this product include...展开 Aliphatic Urethane Acrylate SU 5039 is a nona-functional aliphatic urethane acrylate oligomer that is designed to provide a fast curing response, abrasion resistance, stain resistance, hardness, and light color. Common applications of this product include plastic coatings, hard coatings, clear coatings, vinyl flooring, and inks, . Aliphatic Urethane Acrylate SU 5039 is 85% polymer solid by weight with a mPa.s viscosity of 5,000-9,000 at 60℃. 收起 | |
| Aliphatic Urethane Acrylate SU 511 | Soltech Ltd | Aliphatic Urethane Acrylate SU 511 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, toughness, adhesion and a light color. Common applications of this product include plastic coatings, wood flooring, light st...展开 Aliphatic Urethane Acrylate SU 511 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, toughness, adhesion and a light color. Common applications of this product include plastic coatings, wood flooring, light stable coatings, overprint varnishes, and screen inks, . Aliphatic Urethane Acrylate SU 511 is 100% polymer solid by weight with a mPa.s viscosity of 14,000-20,000 at 60℃. 收起 | |
| Aliphatic Urethane Acrylate SU 512 | Soltech Ltd | Aliphatic Urethane Acrylate SU 512 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, toughness, adhesion and a light color. Common applications of this product include pigment coatings for wood, metal coatings...展开 Aliphatic Urethane Acrylate SU 512 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, toughness, adhesion and a light color. Common applications of this product include pigment coatings for wood, metal coatings, plastic coatings, and ink. Aliphatic Urethane Acrylate SU 512 is 85% polymer solid by weight with a mPa.s viscosity of 3,000-5,000 at 60℃. 收起 | |
| Aliphatic Urethane Acrylate SU 514 | Soltech Ltd | Aliphatic Urethane Acrylate SU 514 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, toughness, adhesion, abrasion resistance, and scratch resistance. Common applications of this product include screen inks, p...展开 Aliphatic Urethane Acrylate SU 514 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, toughness, adhesion, abrasion resistance, and scratch resistance. Common applications of this product include screen inks, plastic coatings, light stable coatings, and overprint varnishes. Aliphatic Urethane Acrylate SU 514 is 90% polymer solid by weight with a mPa.s viscosity of 7,000-10,000 at 60℃. 收起 | |
| Aliphatic Urethane Acrylate SU 519 | Soltech Ltd | Aliphatic Urethane Acrylate SU 519 is an acrylated aliphatic urethane oligomer diluted with 30% of hydroxy propyl methacrylate that is designed to provide flexibility and heat resistance, Common applications of this product include marking inks, plastic a...展开 Aliphatic Urethane Acrylate SU 519 is an acrylated aliphatic urethane oligomer diluted with 30% of hydroxy propyl methacrylate that is designed to provide flexibility and heat resistance, Common applications of this product include marking inks, plastic adhesives, thick film casting, plastic coatings, clear coatings, and overprint varnishes. Aliphatic Urethane Acrylate SU 519 is 70% polymer solid by weight with an mPa.s viscosity of 12,000-18,000 at 25℃. 收起 | |
| Aliphatic Urethane Acrylate SU 520 | Soltech Ltd | Aliphatic Urethane Acrylate SU 520 is a deca-functional aliphatic urethane acrylate oligomer that is designed to provide stain resistance, abrasion resistance, hardness, and a fast curing response. This product is commonly used in applications such as pla...展开 Aliphatic Urethane Acrylate SU 520 is a deca-functional aliphatic urethane acrylate oligomer that is designed to provide stain resistance, abrasion resistance, hardness, and a fast curing response. This product is commonly used in applications such as plastic coatings, inks, clear coatings, vinyl flooring, and hard film coatings. Aliphatic Urethane Acrylate SU 520 is 100% polymer solid by weight with an mPa.s viscosity of 2,500-3,500 at 60℃. 收起 | |
| Aliphatic Urethane Acrylate SU 522 | Soltech Ltd | Aliphatic Urethane Acrylate SU 522 is a hexa-functional aliphatic urethane acrylate oligomer that is designed to provide solvent resistance, abrasion resistance, high gloss, and fast curing. This product is commonly used in applications such as wood coati...展开 Aliphatic Urethane Acrylate SU 522 is a hexa-functional aliphatic urethane acrylate oligomer that is designed to provide solvent resistance, abrasion resistance, high gloss, and fast curing. This product is commonly used in applications such as wood coatings, scratch resistant plastic coatings, and curtain coatings. Aliphatic Urethane Acrylate SU 522 is 100% polymer solid by weight with an mPa.s viscosity of 1,000-2,000 at 60℃. 收起 | |
| Aliphatic Urethane Acrylate SU 5225 | Soltech Ltd | Aliphatic Urethane Acrylate SU 5225 is a di-functional aliphatic urethane acrylate oligomer containing isobonyl acrylate monomer that is designed to provide toughness, flexibility, adhesion, durability, and high elongation. This product is commonly used i...展开 Aliphatic Urethane Acrylate SU 5225 is a di-functional aliphatic urethane acrylate oligomer containing isobonyl acrylate monomer that is designed to provide toughness, flexibility, adhesion, durability, and high elongation. This product is commonly used in applications such as cork coatings, metal coatings, plastic coatings, and wood fillers, and . Aliphatic Urethane Acrylate SU 5225 is 70% polymer solid by weight with an mPa.s viscosity of 20,000-50,000 at 60℃. 收起 | |
| Aliphatic Urethane Acrylate SU 522B | Soltech Ltd | Aliphatic Urethane Acrylate SU 522B is a hexa-functional aliphatic urethane acrylate oligomer that is designed to provide solvent resistance, abrasion resistance, high gloss, and fast curing. This product is commonly used in applications such as wood coat...展开 Aliphatic Urethane Acrylate SU 522B is a hexa-functional aliphatic urethane acrylate oligomer that is designed to provide solvent resistance, abrasion resistance, high gloss, and fast curing. This product is commonly used in applications such as wood coatings, scratch resistant plastic coatings, and curtain coatings. Aliphatic Urethane Acrylate SU 522B is 100% polymer solid by weight with an mPa.s viscosity of 1,200-1,800 at 60℃. 收起 | |
| Aliphatic Urethane Acrylate SU 5260 | Soltech Ltd | Aliphatic Urethane Acrylate SU 5260 is a tri-functional aliphatic urethane acrylate oligomer designed to provide toughness, abrasion resistance, stain resistance, and a fast curing response. Common applications of this product include clear coatings, plas...展开 Aliphatic Urethane Acrylate SU 5260 is a tri-functional aliphatic urethane acrylate oligomer designed to provide toughness, abrasion resistance, stain resistance, and a fast curing response. Common applications of this product include clear coatings, plastic coatings, and vinyl flooring. Aliphatic Urethane Acrylate SU 5260 is 100% polymer solid by weight with an mPa.s viscosity of 2,000-3,000 at 60℃. 收起 | |
| Aliphatic Urethane Acrylate SU 5270 | Soltech Ltd | Aliphatic Urethane Acrylate SU 5270 is a di-functional aliphatic urethane acrylate oligomer designed to provide flexibility, adhesion, toughness, and abrasion resistance. Common applications of this product include metal coatings, plastic coatings, pigmen...展开 Aliphatic Urethane Acrylate SU 5270 is a di-functional aliphatic urethane acrylate oligomer designed to provide flexibility, adhesion, toughness, and abrasion resistance. Common applications of this product include metal coatings, plastic coatings, pigment coatings for wood, and screen inks. Aliphatic Urethane Acrylate SU 5270 is 100% polymer solid by weight with an mPa.s viscosity of 7,000-11,000 at 25℃. 收起 | |
| Aliphatic Urethane Acrylate SU 530 | Soltech Ltd | Aliphatic Urethane Acrylate SU 530 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, low viscosity, and light color. Common applications of this product include laminating adhesives, screen inks, glass pigment...展开 Aliphatic Urethane Acrylate SU 530 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, low viscosity, and light color. Common applications of this product include laminating adhesives, screen inks, glass pigment coatings, and lithographic inks. Aliphatic Urethane Acrylate SU 530 is 100% polymer solid by weight with a mPs.s viscosity of 35,000-55,000 at 25℃. 收起 | |
| Aliphatic Urethane Acrylate SU 5347 | Soltech Ltd | Aliphatic Urethane Acrylate SU 5347 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, adhesion, low viscosity, and light color. Common applications of this product include laminating adhesives, screen inks, gl...展开 Aliphatic Urethane Acrylate SU 5347 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, adhesion, low viscosity, and light color. Common applications of this product include laminating adhesives, screen inks, glass pigment coatings, and lithographic inks. Aliphatic Urethane Acrylate SU 5347 is 100% polymer solid by weight with a mPs.s viscosity of 600-1,200 at 25℃. 收起 | |
| Aliphatic Urethane Acrylate SU 542 | Soltech Ltd | Aliphatic Urethane Acrylate SU 542 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, adhesion, durability, and abrasion resistance. Common applications of this product include metal coatings, plastic coatings,...展开 Aliphatic Urethane Acrylate SU 542 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, adhesion, durability, and abrasion resistance. Common applications of this product include metal coatings, plastic coatings, screen ink, pigment coatings, and clear coatings for cork. Aliphatic Urethane Acrylate SU 542 is 100% polymer solid by weight with a mPs.s viscosity of 500-1,000 at 60℃. 收起 | |
| Aliphatic Urethane Acrylate SU 543 | Soltech Ltd | Aliphatic Urethane Acrylate SU 543 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, adhesion, duability, and abrasion resistance. Common applications of this product include metal coatings, plastic coatings, ...展开 Aliphatic Urethane Acrylate SU 543 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, adhesion, duability, and abrasion resistance. Common applications of this product include metal coatings, plastic coatings, screen ink, pigment coatings, and clear coatings for cork. Aliphatic Urethane Acrylate SU 543 is 100% polymer solid by weight with a mPs.s viscosity of 100-300 at 60℃. 收起 | |
| Aliphatic Urethane Acrylate SU 550 | Soltech Ltd | Aromatic Urethane Acrylate SU 550 is a trifunctional aliphatic urethane acrylate oligomer with 5% water that is designed to provide anti-fogging properties, flexibility, water resistance, and chemical resistance. Common applications of this product includ...展开 Aromatic Urethane Acrylate SU 550 is a trifunctional aliphatic urethane acrylate oligomer with 5% water that is designed to provide anti-fogging properties, flexibility, water resistance, and chemical resistance. Common applications of this product include wood flooring, anti-fog coatings, and water based systems. Aromatic Urethane Acrylate SU 550 is 95% polymer solid by weight with a mPa.s viscosity of 4,500-7,500 at 60℃. 收起 | |
| Aliphatic Urethane Acrylate SU 550A | Soltech Ltd | Aromatic Urethane Acrylate SU 550A is a trifunctional aliphatic urethane acrylate oligomer diluted with water that is designed to provide anti-fogging properties, flexibility, water solubility, and low viscosity. Common applications of this product includ...展开 Aromatic Urethane Acrylate SU 550A is a trifunctional aliphatic urethane acrylate oligomer diluted with water that is designed to provide anti-fogging properties, flexibility, water solubility, and low viscosity. Common applications of this product include wood primers, anti-fog coatings, and water based systems. Aromatic Urethane Acrylate SU 550A is 90% polymer solid by weight with a mPa.s viscosity of 8,000-12,000 at 25℃. 收起 | |
| Aliphatic Urethane Acrylate SU 560 | Soltech Ltd | Aromatic Urethane Acrylate SU 560 is a trifunctional aliphatic urethane acrylate oligomer that is designed to provide anti-fogging properties,water resistance, chemical resistance, and flexibility. Common applications of this product include wood flooring...展开 Aromatic Urethane Acrylate SU 560 is a trifunctional aliphatic urethane acrylate oligomer that is designed to provide anti-fogging properties,water resistance, chemical resistance, and flexibility. Common applications of this product include wood flooring, anti-fog coatings, and water based systems. Aromatic Urethane Acrylate SU 560 is 92% polymer solid by weight with a mPa.s viscosity of 7,000-13,000 at 60℃. 收起 | |
| Aliphatic Urethane Acrylate SU 564 | Soltech Ltd | Aliphatic Urethane Acrylate SU 564 is a a trifunctional aliphatic urethane acrylate oligomer designed to provide flexibility, light color, abrasion, and stain resistance. Common applications of this product include light stable coatings, overprint varnish...展开 Aliphatic Urethane Acrylate SU 564 is a a trifunctional aliphatic urethane acrylate oligomer designed to provide flexibility, light color, abrasion, and stain resistance. Common applications of this product include light stable coatings, overprint varnishes, screen inks, plastic coatings, and wood flooring. Aliphatic Urethane Acrylate SU 564 is 85% polymer solid by weight with a mPa.s viscosity of 37,500-52,000 at 25℃. 收起 | |
| Aliphatic Urethane Acrylate SU 565 | Soltech Ltd | Aliphatic Urethane Acrylate SU 565 is a trifunctional aliphatic urethane acrylate oligomer that is designed to provide stain resistance, abrasion, fast curing, and light color. This product is commonly used in applications such as plastic coatings, light ...展开 Aliphatic Urethane Acrylate SU 565 is a trifunctional aliphatic urethane acrylate oligomer that is designed to provide stain resistance, abrasion, fast curing, and light color. This product is commonly used in applications such as plastic coatings, light stable coatings, overprint varnishes, wood flooring and screen inks. Aliphatic Urethane Acrylate SU 565 is 75% polymer solid by weight with an m.PA.s viscosity of 30,000-40,000 at 25℃. 收起 | |
| Aliphatic Urethane Acrylate SU 570 | Soltech Ltd | Aliphatic Urethane Acrylate SU 570 is a di-functional aliphatic urethane acrylate oligomer designed to provide flexibility, toughness, low viscosity, and a light color/odor. This product is commonly used in applications such as plastic coatings, screen in...展开 Aliphatic Urethane Acrylate SU 570 is a di-functional aliphatic urethane acrylate oligomer designed to provide flexibility, toughness, low viscosity, and a light color/odor. This product is commonly used in applications such as plastic coatings, screen inks, light stable coatings, overprint varnishes, and wood flooring. Aliphatic Urethane Acrylate SU 570 is 100% polymer solid by weight with an mPa.s viscosity of 3,000-4,000 at 60℃. 收起 | |
| Aliphatic Urethane Acrylate SU 571 | Soltech Ltd | Aliphatic Urethane Acrylate SU 571 is a hexa-functional aliphatic urethane acrylate oligomer designed to provide hardness, abrasion resistance, high gloss, fast curing, and light color. This product is commonly used in applications such as scratch-resista...展开 Aliphatic Urethane Acrylate SU 571 is a hexa-functional aliphatic urethane acrylate oligomer designed to provide hardness, abrasion resistance, high gloss, fast curing, and light color. This product is commonly used in applications such as scratch-resistant plastic coatings, wood coatings, and wood fillers. Aliphatic Urethane Acrylate SU 571 is 100% polymer solid by weight with an mPa.s viscosity of 800-1,300 at 60℃. 收起 | |
| Aliphatic Urethane Acrylate SU 574 | Soltech Ltd | Aliphatic Urethane Acrylate SU 574 is a tri-functional aliphatic urethane acrylate oligomer designed to provide abrasion resistance, stain resistance, flexibility, toughness, light color, and good surface curing. This product is commonly used in applicati...展开 Aliphatic Urethane Acrylate SU 574 is a tri-functional aliphatic urethane acrylate oligomer designed to provide abrasion resistance, stain resistance, flexibility, toughness, light color, and good surface curing. This product is commonly used in applications such as wood flooring, light stable coatings, plastic coatings, overprint varnishes, and screen inks. Aliphatic Urethane Acrylate SU 574 is 87% polymer solid by weight with an mPa.s viscosity of 1,500-2,500 at 60℃. 收起 | |
| Aliphatic Urethane Acrylate SU 574B | Soltech Ltd | Aliphatic Urethane Acrylate SU 574B is a tri-functional aliphatic urethane acrylate oligomer designed to provide abrasion resistance, stain resistance, flexibility, toughness, light color, and good surface curing. This product is commonly used in applicat...展开 Aliphatic Urethane Acrylate SU 574B is a tri-functional aliphatic urethane acrylate oligomer designed to provide abrasion resistance, stain resistance, flexibility, toughness, light color, and good surface curing. This product is commonly used in applications such as wood flooring, light stable coatings, plastic coatings, overprint varnishes, and screen inks. Aliphatic Urethane Acrylate SU 574B is 86% polymer solid by weight with an mPa.s viscosity of 1,600-2,000 at 60℃. 收起 | |
| Aliphatic Urethane Acrylate SU 580 | Soltech Ltd | Aliphatic Urethane Acrylate SU 580 is a di-functional aliphatic urethane acrylate oligomer designed to provide durability, flexibility, toughness, low odor, and light color. This product is commonly used in applications such as pigment coatings for wood, ...展开 Aliphatic Urethane Acrylate SU 580 is a di-functional aliphatic urethane acrylate oligomer designed to provide durability, flexibility, toughness, low odor, and light color. This product is commonly used in applications such as pigment coatings for wood, adhesives for glass, metal coatings, plastic coatings, and screen ink binders. Aliphatic Urethane Acrylate SU 580 is 100% polymer solid by weight with an mPa.s viscosity of 13,000-19,000 at 60℃. 收起 | |
| Aliphatic Urethane Acrylate SU 584 | Soltech Ltd | Aliphatic Urethane Acrylate SU 584 is a di-functional aliphatic urethane acrylate oligomer designed to provide durability, flexibility, toughness, and light color. This product is commonly used in applications such as pigment coatings for wood, metal coat...展开 Aliphatic Urethane Acrylate SU 584 is a di-functional aliphatic urethane acrylate oligomer designed to provide durability, flexibility, toughness, and light color. This product is commonly used in applications such as pigment coatings for wood, metal coatings, plastic coatings, and clear coatings for cork. Aliphatic Urethane Acrylate SU 584 is 88% polymer solid by weight with an mPa.s viscosity of 1,500-2,500 at 60℃. 收起 | |
| Aliphatic Urethane Acrylate SU 588 | Soltech Ltd | Aliphatic Urethane Acrylate SU 588 is an aliphatic urethane triacrylate oligomer diluted with approximately 10% of ethoxy-ethoxyethyl acrylate that is designed to provide flexibility, toughness, low odor, fast curing, and light color. This product is comm...展开 Aliphatic Urethane Acrylate SU 588 is an aliphatic urethane triacrylate oligomer diluted with approximately 10% of ethoxy-ethoxyethyl acrylate that is designed to provide flexibility, toughness, low odor, fast curing, and light color. This product is commonly used in applications such as wood top coats, coatings for rigid and flexible plastic, floor tile coatings, and screen print inks. Aliphatic Urethane Acrylate SU 588 is 90% polymer solid by weight with an mPa.s viscosity of 8,000-12,000 at 65℃. 收起 | |
| Aliphatic Urethane Acrylate SU 594 | Soltech Ltd | Aliphatic Urethane Acrylate SU 594 is a tri-functional aliphatic urethane acrylate oligomer designed to provide stain resistance, abrasion resistance, toughness, and light color. This product is commonly used in applications such as plastic coatings, clea...展开 Aliphatic Urethane Acrylate SU 594 is a tri-functional aliphatic urethane acrylate oligomer designed to provide stain resistance, abrasion resistance, toughness, and light color. This product is commonly used in applications such as plastic coatings, clear coatings, and wood flooring. Aliphatic Urethane Acrylate SU 594 is 90% polymer solid by weight with an mPa.s viscosity of 6,500-8,500 at 60℃. 收起 | |
| Alkoxylated 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and...展开 Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and paints. 收起 | |
| Amine Synergist SZ 115 | Soltech Ltd | Amine Synergist SZ 115 is reactive amine additive used in place of more fugitive amine synergists that is designed to provide increased curing speed, light color, stability, low viscosity and low volatility. Common applications of this product include ove...展开 Amine Synergist SZ 115 is reactive amine additive used in place of more fugitive amine synergists that is designed to provide increased curing speed, light color, stability, low viscosity and low volatility. Common applications of this product include overprint varnishes, silk screen inks, flexo inks, pigment coatings, and wood sealers. Amine Synergist SZ 115 is 100% polymer solid by weight with a viscosity of 15-25 at 25℃. 收起 | |
| Aromatic Urethane Acrylate SU 704 | Soltech Ltd | Aromatic Urethane Acrylate SU 704 is a trifunctional aromatic urethane acrylate oligomer with 25% HDDA that is designed to provide flexibility, light color, low odor, abrasion resistance, and solvent resistance. Common applications of this product include...展开 Aromatic Urethane Acrylate SU 704 is a trifunctional aromatic urethane acrylate oligomer with 25% HDDA that is designed to provide flexibility, light color, low odor, abrasion resistance, and solvent resistance. Common applications of this product include wood coatings, plastic coatings, low gloss coatings, and screen inks. Aromatic Urethane Acrylate SU 704 is 75% polymer solid by weight with a mPa.s viscosity of 10,000-20,000 at 25℃. 收起 | |
| Aromatic Urethane Acrylate SU 710 | Soltech Ltd | Aromatic Urethane Acrylate SU 710 is a difunctional aromatic urethane acrylate oligomer designed to provide flexibility, toughness, solvent resistance, abrasion resistance, and adhesion. Common applications of this product include wood coatings, plastic c...展开 Aromatic Urethane Acrylate SU 710 is a difunctional aromatic urethane acrylate oligomer designed to provide flexibility, toughness, solvent resistance, abrasion resistance, and adhesion. Common applications of this product include wood coatings, plastic coatings, low gloss coatings, and screen inks. Aromatic Urethane Acrylate SU 710 is 100% polymer solid by weight with a mPa.s viscosity of 4,000-6,000 at 60℃. 收起 | |
| Aromatic Urethane Acrylate SU 720 | Soltech Ltd | Aromatic Urethane Acrylate SU 720 is a hexafunctional aromatic urethane acrylate oligomer designed to provide fast curing, light color, solvent resistance, abrasion resistance, hardness, and high gloss. Common applications of this product include wood coa...展开 Aromatic Urethane Acrylate SU 720 is a hexafunctional aromatic urethane acrylate oligomer designed to provide fast curing, light color, solvent resistance, abrasion resistance, hardness, and high gloss. Common applications of this product include wood coatings, wood fillers, scratch resistant plastic coatings, and lithographic inks. Aromatic Urethane Acrylate SU 720 is 100% polymer solid by weight with a mPa.s viscosity of 20,000-40,000 at 60℃. 收起 | |
| Aromatic Urethane Acrylate SU 7206 | Soltech Ltd | Aromatic Urethane Acrylate SU 7206 is a trifunctional aromatic urethane acrylate oligomer diluted with trimethylol-propane triacrylate that is designed to provide fast curing, solvent resistance, abrasion resistance, and flexibility. Common applications o...展开 Aromatic Urethane Acrylate SU 7206 is a trifunctional aromatic urethane acrylate oligomer diluted with trimethylol-propane triacrylate that is designed to provide fast curing, solvent resistance, abrasion resistance, and flexibility. Common applications of this product include wood coatings, plastic coatings, low gloss coatings, and screen inks . Aromatic Urethane Acrylate SU 7206 is 70% polymer solid by weight with a mPa.s viscosity of 62,000-82,000 at 25℃. 收起 | |
| DA-100 | DCC (Dairen Chemical Corp.) | DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emu...展开 DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-100L | DCC (Dairen Chemical Corp.) | DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base e...展开 DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100L is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-101 | DCC (Dairen Chemical Corp.) | DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-101 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-101 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-102 | DCC (Dairen Chemical Corp.) | DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2500-3700 mPa.s. DA-102 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-102H | DCC (Dairen Chemical Corp.) | DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...展开 DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3500-4500 mPa.s. DA-102H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-103 | DCC (Dairen Chemical Corp.) | DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-103 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-103H | DCC (Dairen Chemical Corp.) | DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...展开 DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3200-4200 mPa.s. DA-103H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-104 | DCC (Dairen Chemical Corp.) | DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2000-3000 mPa.s. DA-104 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-104 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-107 | DCC (Dairen Chemical Corp.) | DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1000-2500 mPa.s. DA-107 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-107 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1100 | DCC (Dairen Chemical Corp.) | DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 ca...展开 DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 can be used in tile adhesives. 收起 | |
| DA-111 | DCC (Dairen Chemical Corp.) | DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. It is designed as a medium Tg product at around approximately 14 °C. DA-111 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-111 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1120 | DCC (Dairen Chemical Corp.) | DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 ca...展开 DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 can be used in tile adhesives. 收起 | |
| DA-1122 | DCC (Dairen Chemical Corp.) | DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 ca...展开 DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 can be used in tile adhesives. 收起 | |
| DA-1126 | DCC (Dairen Chemical Corp.) | DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds. It is used in ceramic tile adhesives, and EIFS. 收起 | |
| DA-1130 | DCC (Dairen Chemical Corp.) | DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. It can be used in tile adhesives. 收起 | |
| DA-1133 | DCC (Dairen Chemical Corp.) | DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1133 is used in construction adhesives. 收起 | |
| DA-117 | DCC (Dairen Chemical Corp.) | DA-117 is a non-plasticized, aqueous, milky, white dispersion of a vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction applications. After evaporation of its water content, DA-117 forms a flexib...展开 DA-117 is a non-plasticized, aqueous, milky, white dispersion of a vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction applications. After evaporation of its water content, DA-117 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 500-1500 mPa.s. DA-117 is used in joint compounds and decorative coatings, and carpet back coatings. 收起 | |
| DA-1200 | DCC (Dairen Chemical Corp.) | DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1200 is used in tile adhesives. 收起 | |
| DA-1210 | DCC (Dairen Chemical Corp.) | DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1210 is used in construction adhesives, sealing slurries, and repair mortars. 收起 | |
| DA-125 | DCC (Dairen Chemical Corp.) | DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive f...展开 DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-125 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-125 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-128 | DCC (Dairen Chemical Corp.) | DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive f...展开 DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-128H | DCC (Dairen Chemical Corp.) | DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesiv...展开 DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1400 | DCC (Dairen Chemical Corp.) | DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1400 is used in tile adhesives, and sealing slurries. 收起 | |
| DA-1410 | DCC (Dairen Chemical Corp.) | DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1410 is used in construction adhesives. 收起 | |
| DA-1420 | DCC (Dairen Chemical Corp.) | DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compound...展开 DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1420 is used in tile adhesives. 收起 | |
| DA-1430 | DCC (Dairen Chemical Corp.) | DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...展开 DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1430 is used in tile adhesives, and trowelling compounds. 收起 | |
| DA-1450 | DCC (Dairen Chemical Corp.) | DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...展开 DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1450 is used in tile adhesives, and construction adhesives. 收起 | |
| DA-179 | DCC (Dairen Chemical Corp.) | DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is u...展开 DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is used in high performance waterproof coatings. 收起 | |
| DA-180L | DCC (Dairen Chemical Corp.) | DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L ...展开 DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L is used in general adhesives. 收起 | |
| DA-183 | DCC (Dairen Chemical Corp.) | DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mo...展开 DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mortars or grouts. 收起 | |
| DA-265 | DCC (Dairen Chemical Corp.) | DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration...展开 DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration by UV-light, oxygen and the ozone. DA-265 is used in mineral coatings, and floor, wall, or ceiling adhesives. . 收起 | |
| DA-265H | DCC (Dairen Chemical Corp.) | DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, disco...展开 DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, discoloration, oxygen, and the ozone. Because of DA-265H's adjusted ethylene content, this film is extremely tacky and uses no plasticizers to get softness or flexibility. DA-265H is used in mineral coatings, and floor, wall, or ceiling adhesives. 收起 | |
| DA-310 | DCC (Dairen Chemical Corp.) | DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for seali...展开 DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for sealing plastics or metals to other substrates, and as a raw material for adhesives. 收起 | |
| DA-3510 | DCC (Dairen Chemical Corp.) | DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, fle...展开 DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, flexural strength, plasticity, and workability of modified compounds. DA-3510 is recommended for use as a sole binder for making construction adhesives and seals. 收起 | |
| DA-371 | DCC (Dairen Chemical Corp.) | DA-371 is an aqueous, non-plasticized, milky white emulsion synthesized from vinyl acetate and ethylene. DA-371 with different paint formulations can bring about many changes of the gloss of indoor-paints in accordance with the customers’ demand. DA-371 i...展开 DA-371 is an aqueous, non-plasticized, milky white emulsion synthesized from vinyl acetate and ethylene. DA-371 with different paint formulations can bring about many changes of the gloss of indoor-paints in accordance with the customers’ demand. DA-371 is used in low VOC interior paints, semi flat and semi gloss paints, deep shade paints, exterior paints, and plaster and textured coatings. 收起 | |
| DA-500 | DCC (Dairen Chemical Corp.) | DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in...展开 DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-502 | DCC (Dairen Chemical Corp.) | DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 3000-4000 mPa.s. DA-502 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-511 | DCC (Dairen Chemical Corp.) | DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-511 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-523 | DCC (Dairen Chemical Corp.) | DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 700-1000 mPa.s. DA-523 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-524 | DCC (Dairen Chemical Corp.) | DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. I...展开 DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-524 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-6200 | DCC (Dairen Chemical Corp.) | DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-formin...展开 DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-forming agents. DA-6200 is recommended for blending with inorganic binders such as cement, hydrated lime to modify mortar hydration systems, tile adhesives, EIFS, and finishing plasters. 收起 | |
| DA-652 | DCC (Dairen Chemical Corp.) | DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications....展开 DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 15000-25000 mPa.s. DA-652 is used as base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-691 | DCC (Dairen Chemical Corp.) | DA-691 is a non-plasticized, aqueous, milky white, cross-linkable copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-691 forms a flexible and soft film. It has a viscosity at 25 °C of 100-500 mPa.s. DA-691...展开 DA-691 is a non-plasticized, aqueous, milky white, cross-linkable copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-691 forms a flexible and soft film. It has a viscosity at 25 °C of 100-500 mPa.s. DA-691's main use is in EPI wood glue. 收起 | |
| DA-901 | DCC (Dairen Chemical Corp.) | DA-901 is a non-plasticized, aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. Due to it's low Tg levels it provides a soft transparent film. It is generally used as an adhesive and provides a fire retardant p...展开 DA-901 is a non-plasticized, aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. Due to it's low Tg levels it provides a soft transparent film. It is generally used as an adhesive and provides a fire retardant property. DA-901 is used as a general adhesive and is specially suitable for wood applications. 收起 | |
| DA-908 | DCC (Dairen Chemical Corp.) | DA-908 is an aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. DA-908 leads to a clear film with low surface tack, and resistance to water, alkali, solvents, light, and aging. It has a Tg value of 20-30 °C and...展开 DA-908 is an aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. DA-908 leads to a clear film with low surface tack, and resistance to water, alkali, solvents, light, and aging. It has a Tg value of 20-30 °C and is a cloudy substance initially. DA-908 is used as a base emulsion for general adhesives and EPI wood adhesives. 收起 | |
| DA-910 | DCC (Dairen Chemical Corp.) | DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics an...展开 DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起 | |
| DA-920 | DCC (Dairen Chemical Corp.) | DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics a...展开 DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起 | |
| DA-930 | DCC (Dairen Chemical Corp.) | DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics a...展开 DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起 | |
| Epoxy Acrylate SE 120 | Soltech Ltd | Epoxy Acrylate SE 120 is a difunctional epoxy acrylate oligomer designed to provide chemical resistance, water resistance, high closs, light color, and a fast cure response. This product is commonly used in applications such as overprint varnishes, lamina...展开 Epoxy Acrylate SE 120 is a difunctional epoxy acrylate oligomer designed to provide chemical resistance, water resistance, high closs, light color, and a fast cure response. This product is commonly used in applications such as overprint varnishes, laminating adhesives, wood sealers, screen inks, lithographic inks, and fast cure coatings. Epoxy Acrylate SE 120 is 100% polymer solid by weight with a viscosity of 2,000-4,000 at 60℃. 收起 | |
| Epoxy Acrylate SE 140 | Soltech Ltd | Epoxy Acrylate SE 140 is a difunctional epoxy acrylate oligomer designed to provide chemical resistance, water resistance, high closs, light color, and a fast cure response. This product is commonly used in applications such as overprint varnishes, lamina...展开 Epoxy Acrylate SE 140 is a difunctional epoxy acrylate oligomer designed to provide chemical resistance, water resistance, high closs, light color, and a fast cure response. This product is commonly used in applications such as overprint varnishes, laminating adhesives, wood sealers, screen inks, and low odor coatings. Epoxy Acrylate SE 140 is 70% polymer solid by weight with a viscosity of 20,000-30,000 at 25℃. 收起 | |
| Epoxy Acrylate SE 145 | Soltech Ltd | Epoxy Acrylate SE 145 is a modified diacrylate ester of bisphenol A expoxy resin designed to provide surface hardness, solvent resistance, water resistance, low color, and improved pigment wetting. This product is commonly used in applications such as pap...展开 Epoxy Acrylate SE 145 is a modified diacrylate ester of bisphenol A expoxy resin designed to provide surface hardness, solvent resistance, water resistance, low color, and improved pigment wetting. This product is commonly used in applications such as paper coatings, wood coatings, wood sealers, and laminating adhesives. Epoxy Acrylate SE 145 is 75% polymer solid by weight with a viscosity of 15,000-35,000 at 25℃. 收起 | |
| Epoxy Acrylate SE 146 | Soltech Ltd | Epoxy Acrylate SE 146 is a difunctional epoxy acrylate oligomer with 25% TPGDA that is designed to provide chemical resistance, water resistance, low viscosity, high gloss, light color, and a fast curing response. This product is commonly used in applicat...展开 Epoxy Acrylate SE 146 is a difunctional epoxy acrylate oligomer with 25% TPGDA that is designed to provide chemical resistance, water resistance, low viscosity, high gloss, light color, and a fast curing response. This product is commonly used in applications such as fast cure coatings, laminating adhesives, overprint varnishes, lithographic inks, screen inks, and wood sealers. Epoxy Acrylate SE 146 is 75% polymer solid by weight with a viscosity of 8,000-14,000 at 25℃. 收起 | |
| Epoxy Acrylate SE 147 | Soltech Ltd | Epoxy Acrylate SE 147 is an difunctional epoxy acrylate oligomer with 20% HDDA that is designed to provide chemical resistance, water resistance, low viscosity, high gloss, and a fast curing response. This product is commonly used in applications such as ...展开 Epoxy Acrylate SE 147 is an difunctional epoxy acrylate oligomer with 20% HDDA that is designed to provide chemical resistance, water resistance, low viscosity, high gloss, and a fast curing response. This product is commonly used in applications such as fast cure coatings, laminating adhesives, overprint varnishes, lithographic inks, screen inks, and wood sealers. Epoxy Acrylate SE 147 is 80% polymer solid by weight with a viscosity of 6,500-10,500 at 25℃. 收起 | |
| Epoxy Acrylate SE 148 | Soltech Ltd | Epoxy Acrylate SE 148 is an difunctional epoxy acrylate oligomer with 20% TMPTA that is designed to provide solvent resistance, low viscosity, high gloss, and a fast curing response. This product is commonly used in applications such as fast cure coatings...展开 Epoxy Acrylate SE 148 is an difunctional epoxy acrylate oligomer with 20% TMPTA that is designed to provide solvent resistance, low viscosity, high gloss, and a fast curing response. This product is commonly used in applications such as fast cure coatings, laminating adhesives, overprint varnishes, lithographic inks, screen inks, and wood sealers. Epoxy Acrylate SE 148 is 80% polymer solid by weight with a viscosity of 6,500-10,500 at 25℃. 收起 | |
| Epoxy Acrylate SE 1500 | Soltech Ltd | Epoxy Acrylate SE 1500 is an low viscosity version of SE 1701 epoxy acrylate oligomer that is designed to provide solvent resistance, low viscosity, flexibility, and abrasion resistance. This product is commonly used in applications such as lithographic i...展开 Epoxy Acrylate SE 1500 is an low viscosity version of SE 1701 epoxy acrylate oligomer that is designed to provide solvent resistance, low viscosity, flexibility, and abrasion resistance. This product is commonly used in applications such as lithographic inks, screen inks, clear coatings for paper, top coats for wood, and overprint finishes. Epoxy Acrylate SE 1500 is 100% polymer solid by weight with a viscosity of 900-1,500 at 60℃. 收起 | |
| Epoxy Acrylate SE 1605 | Soltech Ltd | Epoxy Acrylate SE 1605 is a partially acrylated ester of a bisphenol A type epoxy resin that contains both acrylate and epoxy properties that is designed to provide solvent resistance, high gloss, flexibility, and a good curing response. This product is c...展开 Epoxy Acrylate SE 1605 is a partially acrylated ester of a bisphenol A type epoxy resin that contains both acrylate and epoxy properties that is designed to provide solvent resistance, high gloss, flexibility, and a good curing response. This product is commonly used in applications such as metal substrate inks, metal substrate coatings, and 2 component curing systems, Epoxy Acrylate SE 1605 is 100% polymer solid by weight with a viscosity of 800-1,200 at 60℃. 收起 | |
| Epoxy Acrylate SE 1636 | Soltech Ltd | Epoxy Acrylate SE 1636 is a high functionality novolac epoxy acrylate oligomer with 50% TMPTA that designed to provide heat resistance, chemical resistance, fast curing, adhesion, and hardness. This product is commonly used in marking inks. Epoxy Acrylate...展开 Epoxy Acrylate SE 1636 is a high functionality novolac epoxy acrylate oligomer with 50% TMPTA that designed to provide heat resistance, chemical resistance, fast curing, adhesion, and hardness. This product is commonly used in marking inks. Epoxy Acrylate SE 1636 is 50% polymer solid by weight with a viscosity of 35,000-55,000 at 25℃. 收起 |
