UL Prospector

成功!

成功保存搜索结果
1050 Coated Middle Chrome Yellow Hebei Canri Chemical Co., Ltd. 1050 Coated Middle Chrome Yellow is a yellow lead chromium pigment. it has an aqueous suspension pH value of 5-8 and strong light, acid, and alkali resistance. 1050 Coated Middle Chrome Yell has applications in paints, coatings, and hot melt coatings.
220 Pigment Scarlet Powder Hebei Canri Chemical Co., Ltd.
805 Dark Chrome Yellow Hebei Canri Chemical Co., Ltd. 805 Dark Chrome Yellow is a yellow lead chromium pigment in the form of a yellow powder. It has a pH value of 6-9 and a heat resistance of approximately 240 °C. 805 Dark Chrome Yellow has applications in inks and coatings.
8050 Dark Chrome Yellow Hebei Canri Chemical Co., Ltd. 8050 Dark Chrome Yellow is a yellow lead chromium pigment. It provides high light resistance, good acid and heat resistance, high tinting strength, and good dispersibility. It also has an aqueous suspension pH value of 5-8. 8050 Dark Chrome Yellow can be ...展开 8050 Dark Chrome Yellow is a yellow lead chromium pigment. It provides high light resistance, good acid and heat resistance, high tinting strength, and good dispersibility. It also has an aqueous suspension pH value of 5-8. 8050 Dark Chrome Yellow can be used in ink and coating applications. 收起
905 Coated Orange Chrome Yellow Hebei Canri Chemical Co., Ltd. 905 Coated Orange Chrome Yellow is a yellow lead chromium pigment in the form of an orange powder. It has good heat, light, acid, and alkali resistance and has an aqueous suspension pH value of 5-8. 905 Coated Orange Chrome Yellow can be used in paint, co...展开 905 Coated Orange Chrome Yellow is a yellow lead chromium pigment in the form of an orange powder. It has good heat, light, acid, and alkali resistance and has an aqueous suspension pH value of 5-8. 905 Coated Orange Chrome Yellow can be used in paint, coating, and hot melt coating applications. 收起
Acetone TOP Solvent Company Limited Acetone, also known as 2-propanone or dimethyl ketone (DMK), is a colorless, low boiling, easy pouring liquid with a distinguishing odor. It is miscible in all proportions with water, alcohols, many hydrocarbons and other organic liquids. It has solvent p...展开 Acetone, also known as 2-propanone or dimethyl ketone (DMK), is a colorless, low boiling, easy pouring liquid with a distinguishing odor. It is miscible in all proportions with water, alcohols, many hydrocarbons and other organic liquids. It has solvent properties for vegetable and animal fats, cellulose, natural and synthetic resins and many other organic substances. The primary use for this product is in printing inks, adhesives, paints and coatings. 收起
Benzidine Yellow G Hebei Canri Chemical Co., Ltd. Benzidine Yellow G is a yellow pigment with a pH value of 6-8 and heat resistance of 180 °C. It can be used in paint, coating, and ink applications.
Butyl Glycol Ether (BGE) TOP Solvent Company Limited Butyl Glycol Ether (BGE) is a colorless, slight smelling liquid with a high boiling point. This product has small hygroscopic properties and is miscible with water at room temperature. This liquid solution is also miscible with several different oxygenate...展开 Butyl Glycol Ether (BGE) is a colorless, slight smelling liquid with a high boiling point. This product has small hygroscopic properties and is miscible with water at room temperature. This liquid solution is also miscible with several different oxygenated solvents, as well as with aliphatic and aromatic hydrocarbons and oils. It is solvent for many natural and synthetic resins, nitrocellulose and ethyl cellulose. Butyl Glycol Either (BGE) is primarily used as a solvent in printing inks, paints and coatings. 收起
Chrome Yellow 105LH Hebei Canri Chemical Co., Ltd.
Ethyl Acetate (EA) TOP Solvent Company Limited Ethyl acetate (EA) is a neutral colorless liquid with a pleasantly fruity odor. Ethyl acetate is primarily used in the production of nitrocellulose and cellulose acetate lacquers and as a solvent in adhesives and coatings.
Fast Yellow 10G Hebei Canri Chemical Co., Ltd. Fast Yellow G is a yellow pigment with a pH value of 6-8 and heat resistance of 180 °C. It carries good dispersibility and favorable weather resistance. Fast Yellow 10G can be used in paint, coating, and ink applications.
Fast Yellow G Hebei Canri Chemical Co., Ltd. Fast Yellow G is a yellow pigment with a pH value of 6-8 and heat resistance of 160 °C. It can be used in paint, coating, and ink applications.
Floating Aluminium Paste 2501 Hebei Canri Chemical Co., Ltd. Floating Aluminium Paste 2501 is an anti-rust pigment. It has favorable floating properties and is suitable for high temperature resistant organic silicone coatings. Floating Aluminium Paste 2501 can also be used in roof coating, pipe coating, and ink app...展开 Floating Aluminium Paste 2501 is an anti-rust pigment. It has favorable floating properties and is suitable for high temperature resistant organic silicone coatings. Floating Aluminium Paste 2501 can also be used in roof coating, pipe coating, and ink applications. 收起
Green Lemon Yellow Hebei Canri Chemical Co., Ltd.
Iron Oxide Black 330 Hebei Canri Chemical Co., Ltd.
Iron Oxide Black 722 Hebei Canri Chemical Co., Ltd. Iron Oxide Black 722 is a black iron oxide pigment in the form of a powder. It provides a pure color and high tinting strength. Iron Oxide Black 722 has applications in paints, coatings, and building materials.
Iron Oxide Black 732 Hebei Canri Chemical Co., Ltd. Iron Oxide Black 732 is a black iron oxide pigment in the form of a powder. It provides a pure color and high tinting strength. Iron Oxide Black 732 has applications in paints, coatings, and building materials.
Iron Oxide Blue 886 Hebei Canri Chemical Co., Ltd.
Iron Oxide Brown 686 Hebei Canri Chemical Co., Ltd. Iron Oxide Brown 686 is a brown iron oxide pigment. It has a wider color range and strong adaptability and has applications in paints, coatings, and building materials.
Iron Oxide Green 5605 Hebei Canri Chemical Co., Ltd. Iron Oxide Green 5605 is a green iron oxide pigment. It provides bright color and high tinting strength and has applications in paints, coatings, and building materials.
Iron Oxide Green 835 Hebei Canri Chemical Co., Ltd.
Iron Oxide Orange 960 Hebei Canri Chemical Co., Ltd.
Iron Oxide Red 110 Hebei Canri Chemical Co., Ltd. Iron Oxide Red 110 is a red iron oxide pigment in the form of a powder. It has a spherical particle shape and a pH value of 3-7. Iron Oxide Red 110 has applications in paints and coatings.
Iron Oxide Red 130 Hebei Canri Chemical Co., Ltd. Iron Oxide Red 130 is a red iron oxide pigment in the form of a powder. It has a spherical particle shape and a pH value of 3-7. Iron Oxide Red 130 has applications in paints and coatings.
Iron Oxide Red 180 Hebei Canri Chemical Co., Ltd. Iron Oxide Red 180 is a red iron oxide pigment in the form of a powder. It has a spherical particle shape and a pH value of 3-7. Iron Oxide Red 180 has applications in paints and coatings.
Iron Oxide Red 190 Hebei Canri Chemical Co., Ltd. Iron Oxide Red 190 is a red iron oxide pigment in the form of a powder. It has a spherical particle shape and a pH value of 3-7. Iron Oxide Red 190 has applications in paints and coatings.
Iron Oxide Yellow 313 Hebei Canri Chemical Co., Ltd. Iron Oxide Yellow 313 is a yellow iron oxide pigment in the form of a powder. It has an acicular particle shape and a pH value of 3-7. Iron Oxide Yellow 313 has applications in paints and coatings.
Iron Oxide Yellow 920 Hebei Canri Chemical Co., Ltd. Iron Oxide Yellow 920 is a yellow iron oxide pigment in the form of a powder. It has an acicular particle shape and a pH value of 3-7. Iron Oxide Yellow 920 has applications in paints and coatings.
Iron-Titanium Compound Powder 303 Hebei Canri Chemical Co., Ltd. Iron-Titanium Compound Powder 303 is an anti-rust pigment in the form of a light white powder. It is suitable for aqueous, oily, and various types of base minerals to produce anti-rust paint and primer. It has a phosphorous pentoxide content of less than ...展开 Iron-Titanium Compound Powder 303 is an anti-rust pigment in the form of a light white powder. It is suitable for aqueous, oily, and various types of base minerals to produce anti-rust paint and primer. It has a phosphorous pentoxide content of less than or equal to 12 percent. Iron-Titanium Compound Powder 303 can be used in any paint application requiring requiring anti-rust properties. 收起
Iron-Titanium Compound Powder 404 Hebei Canri Chemical Co., Ltd. Iron-Titanium Compound Powder 404 is an anti-rust pigment in the form of a white powder. It is suitable for aqueous, oily, and various types of base minerals to produce anti-rust paint and primer. It has a silicate content of less than or equal to 13 perc...展开 Iron-Titanium Compound Powder 404 is an anti-rust pigment in the form of a white powder. It is suitable for aqueous, oily, and various types of base minerals to produce anti-rust paint and primer. It has a silicate content of less than or equal to 13 percent. Iron-Titanium Compound Powder 404 can be used in any paint application requiring requiring anti-rust properties. 收起
Iron-Titanium Compound Powder 505 Hebei Canri Chemical Co., Ltd. Iron-Titanium Compound Powder 505 is an anti-rust pigment in the form of a silver-gray powder. It is used to replace zinc powder, micaceous iron oxide, and other anti-rust pigments in paints. It has a silicate content of less than or equal to 18 percent. ...展开 Iron-Titanium Compound Powder 505 is an anti-rust pigment in the form of a silver-gray powder. It is used to replace zinc powder, micaceous iron oxide, and other anti-rust pigments in paints. It has a silicate content of less than or equal to 18 percent. Iron-Titanium Compound Powder 505 can be used in any paint application requiring requiring anti-rust properties. 收起
Iron-Titanium Compound Powder 808 Hebei Canri Chemical Co., Ltd. Iron-Titanium Compound Powder 808 is an anti-rust pigment in the form of a silver-gray powder. It is used to replace red lead anti-rust pigment to produce anti-rust paints and primers. It has a silicate and chromate content of less than or equal to 8 and ...展开 Iron-Titanium Compound Powder 808 is an anti-rust pigment in the form of a silver-gray powder. It is used to replace red lead anti-rust pigment to produce anti-rust paints and primers. It has a silicate and chromate content of less than or equal to 8 and 30 percent respectively. Iron-Titanium Compound Powder 808 can be used in any paint application requiring requiring anti-rust properties. 收起
Isopropanol (IPA) TOP Solvent Company Limited Isopropanol (IPA) is a clear colorless water-white mobile liquid with a mild alcohol like odor. It is miscible in all proportions with water and numerous organic liquids and is solvent in many organic substances. Isopropanol is primarily to form azeotropi...展开 Isopropanol (IPA) is a clear colorless water-white mobile liquid with a mild alcohol like odor. It is miscible in all proportions with water and numerous organic liquids and is solvent in many organic substances. Isopropanol is primarily to form azeotropic mixtures with water and many organic liquids. It is used in printing inks, adhesives, paints and coatings. 收起
Lemon Chrome Yellow 501 Hebei Canri Chemical Co., Ltd. Lemon Chrome Yellow 501 is a yellow lead chromium pigment in the form of a yellow powder. It has a pH value of 6-9 and can be used in inks and coatings.
Methanol TOP Solvent Company Limited Methanol (MeOH) also known as Methyl Alcohol or wood spirit, is the most simple alcohol with a single carbon atom. Its many different applications include the manufacture of acetic, acid, acetic anhydride, formaldehyde, MMA. The primary use of methanol is...展开 Methanol (MeOH) also known as Methyl Alcohol or wood spirit, is the most simple alcohol with a single carbon atom. Its many different applications include the manufacture of acetic, acid, acetic anhydride, formaldehyde, MMA. The primary use of methanol is in printing inks, paints and coatings as solvents, thinners, denaturant for ethanol and producing biodiesel. 收起
Methyl Ethyl Ketone (MEK) TOP Solvent Company Limited Methyl ethyl ketone (MEK) is a colorless, low viscosity liquid with a slight odor similar to that of acetone. It is fully miscible with many organic liquids, but is limited to the miscibility with water. With natural and synthetic resins, MEK produces sol...展开 Methyl ethyl ketone (MEK) is a colorless, low viscosity liquid with a slight odor similar to that of acetone. It is fully miscible with many organic liquids, but is limited to the miscibility with water. With natural and synthetic resins, MEK produces solutions with low viscosity and high solid content. The primary use for this product is a solvent for printing inks, adhesives, paints and coatings. 收起
Methyl Isobutyl Ketone (MIBK) TOP Solvent Company Limited Methyl isobutyl ketone (MIBK) is a colorless, medium boiling liquid, with a distinguishing mild odor. It is miscible with the common solvents and diluent, but only slightly with water. MIBK is a solvent power for nitrocellulose, many natural and synthetic...展开 Methyl isobutyl ketone (MIBK) is a colorless, medium boiling liquid, with a distinguishing mild odor. It is miscible with the common solvents and diluent, but only slightly with water. MIBK is a solvent power for nitrocellulose, many natural and synthetic resins and can produce solutions of low viscosity and high solid content. The primary use for this product is a solvent for printing inks, adhesives, paints and coatings. 收起
Methylene Chloride TOP Solvent Company Limited Methylene Chloride is a clear transparent organochloride compound widely used as a solvent. This product is a neutral liquid heavier than water and non-flammable. Methylene Chloride is fully miscible with almost all organic solvents but only slightly with...展开 Methylene Chloride is a clear transparent organochloride compound widely used as a solvent. This product is a neutral liquid heavier than water and non-flammable. Methylene Chloride is fully miscible with almost all organic solvents but only slightly with water. It has solvent properties with most organic chemicals and materials. This product is primarily used as a solvent in paints and coatings. 收起
Middle Chrome Yellow 103N Hebei Canri Chemical Co., Ltd. Middle Chrome Yellow 103N is a yellow lead chromium pigment in the form of a yellow powder. It has a pH value of 6-9 and a heat resistance of approximately 240 °C. Middle Chrome Yellow 103N has applications in inks and coatings.
Middle Chrome Yellow 295 Hebei Canri Chemical Co., Ltd.
Molybdate Red 107 Hebei Canri Chemical Co., Ltd. Molybdate Red 107 is an orange lead chromium pigment in the form of a red powder. It has a pH value of 4-8 can be used in ink and coating applications.
Molybdate Red 207 Hebei Canri Chemical Co., Ltd. Molybdate Red 207 is an orange lead chromium pigment in the form of a red powder. It has a pH value of 4-8 can be used in ink and coating applications.
Molybdate Red 307 Hebei Canri Chemical Co., Ltd. Molybdate Red 307 is an orange lead chromium pigment in the form of a red powder. It has a pH value of 4-8 can be used in ink and coating applications.
Molybdate Red F210 Hebei Canri Chemical Co., Ltd. Molybdate Red F210 is an orange lead chromium pigment in the form of a red powder. It has a pH value of 5-8 can be used in ink and coating applications.
N-Butyl Acetate (BA) TOP Solvent Company Limited N-Butyl acetate (BA) is a neutral colorless liquid with a unique odor. Butyl acetate has good solvent properties, and it has good volatility, high ability to be diluted makes it one of the most important medium-volatility solvents. N-Butyl acetate is prim...展开 N-Butyl acetate (BA) is a neutral colorless liquid with a unique odor. Butyl acetate has good solvent properties, and it has good volatility, high ability to be diluted makes it one of the most important medium-volatility solvents. N-Butyl acetate is primarily used as a solvent in printing inks, adhesives, paints and coatings. 收起
Non-Floating Aluminium Paste 110 Hebei Canri Chemical Co., Ltd. Non-Floating Aluminium Paste 110 is an anti-rust pigment. It is used to protect metal surfaces from corrosion. Non-Floating Aluminium Paste 110 is used widely in marine paintings and mechanical and electrical product primers.
Pale Chrome Yellow 605 Hebei Canri Chemical Co., Ltd. Pale Chrome Yellow 605 is a yellow lead chromium pigment in the form of a yellow powder. It has a pH value of 6-9 and a heat resistance of approximately 240 °C. Pale Chrome Yellow 605 has applications in inks and coatings.
Pigment Black CR311 Hebei Canri Chemical Co., Ltd. Pigment Black CR311 is a black pigment with a pH value of 2-3. It provides high tinting strength, no impurity, high weather resistance, and good ultraviolet protection. Pigment Black CR311 can be used in paint, coating, and ink applications.
Pigment Black XD611 Hebei Canri Chemical Co., Ltd. Pigment Black XD611 is a black pigment. It provides high tinting strength, no impurity, high weather resistance, and good ultraviolet protection and has a pH value of 2-3. Pigment Black XD611 can be used in paint, coating, ink, paper making, and leather a...展开 Pigment Black XD611 is a black pigment. It provides high tinting strength, no impurity, high weather resistance, and good ultraviolet protection and has a pH value of 2-3. Pigment Black XD611 can be used in paint, coating, ink, paper making, and leather applications. 收起
Pigment Blue CR-102 Hebei Canri Chemical Co., Ltd. Pigment Blue CR-102 is a blue pigment with a bright color, high tinting strength, and favorable light resistance. It has a pH value of 6-8 and a heat resistance of 150 °C. Pigment Blue CR-102 can be used in ink applications.
Pigment Blue CR-103 Hebei Canri Chemical Co., Ltd. Pigment Blue CR-103 is a blue pigment with a bright color, high tinting strength, and favorable light resistance. It has a pH value of 6-8 and a heat resistance of 150 °C. Pigment Blue CR-103 can be used in ink applications.
Pigment Blue XD-101 Hebei Canri Chemical Co., Ltd. Pigment Blue XD-101 is a blue pigment that provides bright color, high tinting strength, and favorable light resistance. It has a pH value of 6-8 and heat resistance of 150 °C. Pigment Blue XD-101 can be used in ink applications.
Pigment Golden Red C Hebei Canri Chemical Co., Ltd. Pigment Golden Red C is a red pigment that has a pH value of 6-8 and heat resistance of 130 °C. It can be used in ink applications.
Pigment Green G Hebei Canri Chemical Co., Ltd. Pigment Green G is a green pigment with a pH value of 6-8. It has a heat resistance of 200 °C and can be used in paint and coating applications.
Pigment Green G-B Hebei Canri Chemical Co., Ltd. Pigment Green G-B is a dark green pigment that provides high tinting strength. It has a pH value of 6-8 and heat resistance of 200 °C. Pigment Green G-B can be used in paint, coating, ink, and printing paste applications.
Pigment Scarlet Powder 3132 Hebei Canri Chemical Co., Ltd. Pigment Scarlet Powder 3132 is a red pigment that provides high tinting strength to desired products. It has a pH value of 6-8 and can be used in ink, coating, paint, and printing paste applications.
Pigment Scarlet Powder 808 Hebei Canri Chemical Co., Ltd. Pigment Scarlet Powder 808 is a red pigment that provides high tinting strength to desired products. It can be used in ink, coating, paint, and printing paste applications.
Pigment Yellow G Hebei Canri Chemical Co., Ltd. Pigment Yellow G is a yellow pigment that carries high dispersibility and covering power. It has a pH value of 6-8 and heat resistance of 200 °C. Pigment Yellow G can be used in paint, coating, and ink applications.
Powder Coating Grade Hongdan Hebei Canri Chemical Co., Ltd.
RF 1120 A/B Resin Formulators (E.V. Roberts) RF 1120 A/B is a two-part epoxy adhesive system for bonding a wide variety of substrates. This product is thixotropic, and so can be used on vertical surfaces without excessive run out from the bond line. RF 1120 is also supplied in a one part premixed an...展开 RF 1120 A/B is a two-part epoxy adhesive system for bonding a wide variety of substrates. This product is thixotropic, and so can be used on vertical surfaces without excessive run out from the bond line. RF 1120 is also supplied in a one part premixed and frozen form. RF 1120 Blue is manufactured to MT-5-20. 收起
RF 1141 A/B Resin Formulators (E.V. Roberts) RF 1141 A/B is a two-part low-density epoxy syntactic system. It is qualified to SCGMS 58001, Type 2, Class 1 or Class 2. This product is slightly thixotropic, and so can be used on vertical surfaces without excessive run out. RF 1141 can be supplied in S...展开 RF 1141 A/B is a two-part low-density epoxy syntactic system. It is qualified to SCGMS 58001, Type 2, Class 1 or Class 2. This product is slightly thixotropic, and so can be used on vertical surfaces without excessive run out. RF 1141 can be supplied in Semkits. 收起
RF 1144 A/B Kit Resin Formulators (E.V. Roberts) RF 1144 A/B Kit is a two-part heat cured, low density, high strength, syntactic system that is formulated for continuous service at high temperatures. RF 1144 has excellent mechanical properties up to 350°F.
RF 1366 Resin Formulators (E.V. Roberts) RF 1366 is a medium viscosity standard epoxy resin designed for potting, encapsulating and filament winding. It can be used with a wide variety of curing agents to generate products with a broad range of work lives, cure conditions and mechanical properti...展开 RF 1366 is a medium viscosity standard epoxy resin designed for potting, encapsulating and filament winding. It can be used with a wide variety of curing agents to generate products with a broad range of work lives, cure conditions and mechanical properties. This system can be cured in high humidity and low temperatures and produces a hard glossy surface. RF 1366 offers very good wet out and can produce a high strength laminate. In addition, this resin can be used for coating, potting and encapsulating small electronic components and exhibits good electrical properties. 收起
RF 1386 A/B Kit Resin Formulators (E.V. Roberts) RF 1386 A/B Kit is a two-part, thixotropic, high strength epoxy adhesive system designed for use in food packaging and water filtration applications and meets the requirements of provision 21 CFR 175.105. The raw materials used in RF 1386 are listed for u...展开 RF 1386 A/B Kit is a two-part, thixotropic, high strength epoxy adhesive system designed for use in food packaging and water filtration applications and meets the requirements of provision 21 CFR 175.105. The raw materials used in RF 1386 are listed for use in “Food Packaging Adhesive” applications and are classified as FDA Approved under the same provision. It has excellent wet out and can easily penetrate fibrous substrates. RF 1386 has exceptional adhesive strength to a wide variety of substrates, including membranes, separators and other material used in reverse osmosis. 收起
RF 1392 A/B Resin Formulators (E.V. Roberts) RF 1392 A/B is a medium fast curing toughened epoxy adhesive system for bonding a wide variety of substrates. This product is slightly thixotropic, and so can be used on vertical surfaces without excessive run out from the bond line. RF 1392 A/B has excel...展开 RF 1392 A/B is a medium fast curing toughened epoxy adhesive system for bonding a wide variety of substrates. This product is slightly thixotropic, and so can be used on vertical surfaces without excessive run out from the bond line. RF 1392 A/B has excellent adhesion to metal and plastic substrates as well as excellent water soak and environmental resistance. 收起
RF 1393 A/B Resin Formulators (E.V. Roberts) RF 1393 A/B is a medium fast curing toughened epoxy adhesive system for bonding a wide variety of substrates. This product is slightly thixotropic, and so can be used on vertical surfaces without excessive run out from the bond line. RF 1393 A/B has excel...展开 RF 1393 A/B is a medium fast curing toughened epoxy adhesive system for bonding a wide variety of substrates. This product is slightly thixotropic, and so can be used on vertical surfaces without excessive run out from the bond line. RF 1393 A/B has excellent adhesion to metal and plastic substrates as well as excellent water soak and environmental resistance. RF 1393 A/B has been used to bond Fluorocarbon sheeting to steel structures. 收起
RF 14 Resin Formulators (E.V. Roberts) RF 14 is a standard polyamine (TETA) curing agent for use with liquid epoxy resins. It provides rapid cures at ambient temperature, excellent chemical resistance and intermediate temperature resistance. Compared with DETA, it has a lower vapor pressure, i...展开 RF 14 is a standard polyamine (TETA) curing agent for use with liquid epoxy resins. It provides rapid cures at ambient temperature, excellent chemical resistance and intermediate temperature resistance. Compared with DETA, it has a lower vapor pressure, is somewhat less hygroscopic and does not carbamate as readily. 收起
RF 1591BK A/B Resin Formulators (E.V. Roberts) RF 1591BK A/B is a low viscosity potting system. This system will meet the UL 94V-0 burn test as a self-extinguishing system. RF 1591BK A/B has good thermal conductivity, chemical and thermal shock resistance. It has very good adhesion to a variety of sub...展开 RF 1591BK A/B is a low viscosity potting system. This system will meet the UL 94V-0 burn test as a self-extinguishing system. RF 1591BK A/B has good thermal conductivity, chemical and thermal shock resistance. It has very good adhesion to a variety of substrates. 收起
RF 1710 A/B Resin Formulators (E.V. Roberts) RF 1710 A/B is a two-component polyurethane rigid foam system. It was formulated to resist high temperatures. It is also CFC free. This resin system is used whenever rigid closed cell foam is needed. Applications include thermal insulation of pipes, tanks...展开 RF 1710 A/B is a two-component polyurethane rigid foam system. It was formulated to resist high temperatures. It is also CFC free. This resin system is used whenever rigid closed cell foam is needed. Applications include thermal insulation of pipes, tanks, and panels. 收起
RF 1902 (AS) A/B Kit Resin Formulators (E.V. Roberts) RF 1902 (AS) A/B Kit is a low viscosity, low density, epoxy system designed for potting and encapsulating. This product is pourable when mixed and will cure at room temperature. This system will bond to a wide variety of substrates. Castings can be machin...展开 RF 1902 (AS) A/B Kit is a low viscosity, low density, epoxy system designed for potting and encapsulating. This product is pourable when mixed and will cure at room temperature. This system will bond to a wide variety of substrates. Castings can be machined or sanded within 16 to 24 hours. 收起
RF 2388 1-Component Resin Formulators (E.V. Roberts) RF 2388 is a 1-Component anti-corrosion paste adhesive system for aluminum substrates with excellent high temperature properties.
RF 24 Resin Formulators (E.V. Roberts) RF 24 is a cycloaliphatic amine curing agent used to cure various epoxy resins at elevated temperatures. This particular curing agent offers light color, low viscosity, long pot life and high glass transition temperature (Tg). Because of its light color, ...展开 RF 24 is a cycloaliphatic amine curing agent used to cure various epoxy resins at elevated temperatures. This particular curing agent offers light color, low viscosity, long pot life and high glass transition temperature (Tg). Because of its light color, absence of staining and excellent physical properties, it is recommended has a replacement for aromatic amines. 收起
RF 2869 Mod 2 Resin Formulators (E.V. Roberts) RF 2869 Mod 2 is a one-part, silver filled, electrically conductive epoxy adhesive. This system does not require mixing or vacuum degassing. Cure is achieved at temperatures as low as 82°C (180°F) for one hour or a short dwell at 121°C (250°F) for three m...展开 RF 2869 Mod 2 is a one-part, silver filled, electrically conductive epoxy adhesive. This system does not require mixing or vacuum degassing. Cure is achieved at temperatures as low as 82°C (180°F) for one hour or a short dwell at 121°C (250°F) for three minutes. Because RF 2869 Mod 2 is already vacuum degassed during manufacturing and no mixing is required, a void free casting or bond line is easily achieved. When cured, this adhesive will have very high thermal and electrical conductive properties. 收起
RF 2969 (Mod 4) A/B Kit Resin Formulators (E.V. Roberts) RF 2969 (Mod 4) A/B Kit is a thixotropic, high strength epoxy adhesive system with good physical strength and high electrical conductivity. This material is designed where hot solder applications are impractical or on parts which cannot be subjected to h...展开 RF 2969 (Mod 4) A/B Kit is a thixotropic, high strength epoxy adhesive system with good physical strength and high electrical conductivity. This material is designed where hot solder applications are impractical or on parts which cannot be subjected to heat. RF 2969 (Mod 4) is also effective as a shielding material. Open working time is 45 minutes and full cure is achieved in 24 hours at room temperature. 收起
RF 2970 A/B Resin Formulators (E.V. Roberts) RF 2970 A/B is a thixotropic, fast setting, high strength epoxy adhesive with good physical strength and high electrical conductivity. This material is designed for applications where hot solder applications are impractical or on parts which cannot be sub...展开 RF 2970 A/B is a thixotropic, fast setting, high strength epoxy adhesive with good physical strength and high electrical conductivity. This material is designed for applications where hot solder applications are impractical or on parts which cannot be subjected to heat. 收起
RF 30 Resin Formulators (E.V. Roberts) RF 35 is a di-functional polyglycol amine curing agent used to cure various epoxy resins at elevated temperatures. This particular curing agent offers light color, low viscosity, long pot life, high elongation and excellent thermal shock resistance.
RF 3000 Resin Formulators (E.V. Roberts) RF 3000 is a modified low viscosity Bisphenol A epoxy resin. It has viscosity of 500-700 cps at 77°F.
RF 32 Resin Formulators (E.V. Roberts) RF 35 is a modified aromatic amine. It offers long pot life coupled with rapid cure response. RF 32 is non-staining and has physical properties and chemical resistances equivalent to MDA cured resins.
RF 4010 Resin Formulators (E.V. Roberts) RF 4010 is medium viscosity modified bisphenol A epoxy. It is suitable for laminating, potting and RTM applications. The diluent in RF 4010 was chosen to minimize the effect on Tg, chemical resistance and reduce skin irritation. It does not contain butyl ...展开 RF 4010 is medium viscosity modified bisphenol A epoxy. It is suitable for laminating, potting and RTM applications. The diluent in RF 4010 was chosen to minimize the effect on Tg, chemical resistance and reduce skin irritation. It does not contain butyl glycidyl ether (BGE) or cresyl glycidyl ether (CGE). The cured properties of RF 4010 will depend on the choice of hardener. 收起
RF 4407 Resin Formulators (E.V. Roberts) RF 4407 is a filled epoxy resin designed for potting or casting applications. Various curing agents can be used to achieve particular end properties. Regardless of which curing agent is used, the end product will be a thermally conductive plastic. RF 4407...展开 RF 4407 is a filled epoxy resin designed for potting or casting applications. Various curing agents can be used to achieve particular end properties. Regardless of which curing agent is used, the end product will be a thermally conductive plastic. RF 4407 can be colored with any of the RF color concentrates. RF 4407-130 is colored black, RF 4407-139 is the white version. RF 4408 is the thixotropic version of RF 4407 when a soft paste is required prior to cure. 收起
RF 46 Resin Formulators (E.V. Roberts) RF 46 is a standard, medium viscosity, polyamide resin for ambient curing of epoxy resins. It is intended as an equivalent “drop-in” for Versamid 125 and can be used without formulation changes. When mixed at stoichiometric ratios it cures to hard, durabl...展开 RF 46 is a standard, medium viscosity, polyamide resin for ambient curing of epoxy resins. It is intended as an equivalent “drop-in” for Versamid 125 and can be used without formulation changes. When mixed at stoichiometric ratios it cures to hard, durable, moisture and chemical resistant plastics. The ratios can be extended to 1:1 by weight to improve flexibility. 收起
RF 47 Resin Formulators (E.V. Roberts) RF 47 is a standard, medium viscosity, polyamide resins for ambient curing of epoxy resins. They are intended as equivalent “drop-ins” for Versamid 125 and can be used without formulation changes. When mixed at stoichiometric ratios they cure to hard, dur...展开 RF 47 is a standard, medium viscosity, polyamide resins for ambient curing of epoxy resins. They are intended as equivalent “drop-ins” for Versamid 125 and can be used without formulation changes. When mixed at stoichiometric ratios they cure to hard, durable, moisture and chemical resistant plastics. The ratios can be extended to 1:1 by weight to improve flexibility. RF 47 complies with FDA 21 CFR 175.300, 21 CFR 176.170 and 21 CFR 175.105. RF 46 is a TETA free version of RF 47. 收起
RF 5000 Resin Formulators (E.V. Roberts) RF 5000 is a standard viscosity Bisphenol A epoxy resin. It has a viscosity of 11,000-15,000 cps at 77°F.
RF 5061 A/B Kit Resin Formulators (E.V. Roberts) RF 5061 A/B Kit is a two-part, semi-thixotropic epoxy paste designed for bonding soft, semi-porous materials such as wood, ceramic or composites. RF 5061 (Mod 1) and (Mod 2) are accelerated versions of RF 5061 that reduce fixturing time. When heated to 15...展开 RF 5061 A/B Kit is a two-part, semi-thixotropic epoxy paste designed for bonding soft, semi-porous materials such as wood, ceramic or composites. RF 5061 (Mod 1) and (Mod 2) are accelerated versions of RF 5061 that reduce fixturing time. When heated to 150°F, RF 5061 (Mod 1) can be handled and machined after 15-20 minutes. 收起
RF 53 Resin Formulators (E.V. Roberts) RF 53 is a bi-cyclic anhydride that offers exceptionally long pot life and very high Tg. It cures into a highly temperature resistant plastic and it used for high temperature filament winding and RTM/VARTM applications. RF 53 requires a suitable accelerat...展开 RF 53 is a bi-cyclic anhydride that offers exceptionally long pot life and very high Tg. It cures into a highly temperature resistant plastic and it used for high temperature filament winding and RTM/VARTM applications. RF 53 requires a suitable accelerator such as RF 22 or RF 80. 收起
RF 5407 Resin Formulators (E.V. Roberts) RF 5407 is an easy-to-use, aluminum oxide, liquid epoxy resin with excellent electrical insulation properties and high thermal conductivity. RF 5407 can be cured with nearly any hardener to produce a wide range of properties and cure cycles. Several poten...展开 RF 5407 is an easy-to-use, aluminum oxide, liquid epoxy resin with excellent electrical insulation properties and high thermal conductivity. RF 5407 can be cured with nearly any hardener to produce a wide range of properties and cure cycles. Several potential curing agents are listed below. Regardless of which curing agent is selected, the resultant plastic will have low shrinkage during cure, excellent thermal stability and conductivity, and be a strong and durable casting. 收起
RF 6002 Resin Formulators (E.V. Roberts) RF 6002 is a modified Novolac epoxy resin. It offers improved Tg and chemical resistance versus standard bisphenol A epoxies. RF 6002 has a medium-low viscosity and is suitable for laminating, RTM and filament winding applications. The handling and final ...展开 RF 6002 is a modified Novolac epoxy resin. It offers improved Tg and chemical resistance versus standard bisphenol A epoxies. RF 6002 has a medium-low viscosity and is suitable for laminating, RTM and filament winding applications. The handling and final cure properties can be adjusted by the choice of curing agent. 收起
RF 61 Resin Formulators (E.V. Roberts) RF 61 is a polyamide curing agent for use with various epoxy resins. This specific curing agent is designed to add toughness and flexibility to cured epoxy resins. It has very good adhesive strength characteristics and will bond with most substrates. Diff...展开 RF 61 is a polyamide curing agent for use with various epoxy resins. This specific curing agent is designed to add toughness and flexibility to cured epoxy resins. It has very good adhesive strength characteristics and will bond with most substrates. Different mix ratios will impart varying degrees of increasing flexibility to the cured systems. A mix with RF 61 will have at least a one hour pot life under normal conditions. Cure will take place at room temperature or, in small castings or adhesives, can be accelerated with heat. 收起
RF 6100 A/B Kit Resin Formulators (E.V. Roberts) RF 6100 A/B Kit is a medium viscosity, high temperature epoxy adhesive system for bonding metal and composite structures. RF 6100 has an open pot life of four hours and cures in one hour at 200°F.
RF 62 Resin Formulators (E.V. Roberts) RF 62 is a standard, high viscosity, polyamide resin for ambient curing of epoxy resins. It is intended as an equivalent “drop-in” for Versamid 115 and can be used without formulation changes. When mixed at stoichiometric ratio it cures to a tough, durabl...展开 RF 62 is a standard, high viscosity, polyamide resin for ambient curing of epoxy resins. It is intended as an equivalent “drop-in” for Versamid 115 and can be used without formulation changes. When mixed at stoichiometric ratio it cures to a tough, durable, moisture and chemical resistant plastic. RF 62 complies with FDA 21 CFR 175.300 and 21 CFR 175.105. 收起
RF 67 Resin Formulators (E.V. Roberts) RF 67 curing agent is a polyfunctional, fatty amidoamine for use in curing liquid epoxy resins. It is intended as an equivalent “drop-in” for Genamid 2000 and can be used without formulation changes. Special features of this room temperature curing agent ...展开 RF 67 curing agent is a polyfunctional, fatty amidoamine for use in curing liquid epoxy resins. It is intended as an equivalent “drop-in” for Genamid 2000 and can be used without formulation changes. Special features of this room temperature curing agent include relatively rapid cure rate, and the ability to cure in the presence of moisture. The mix ratio can be varied over a wide range to generate cured products that range from hard and rigid to soft and flexible. Appropriate applications include marine coatings, high-solids and solvent-free coatings, flooring, adhesives and laminates. It is approved for use in U.S. Navy Specification MILP-24441/Ships Coatings. 收起
RF 68 Resin Formulators (E.V. Roberts) RF 68 is a standard, low viscosity, fatty acid amidoamine resin for ambient curing of epoxy resins. It is intended as an equivalent “drop-in” for Genamid 250 and can be used without formulation changes. When mixed at stoichiometric ratio it cures to a har...展开 RF 68 is a standard, low viscosity, fatty acid amidoamine resin for ambient curing of epoxy resins. It is intended as an equivalent “drop-in” for Genamid 250 and can be used without formulation changes. When mixed at stoichiometric ratio it cures to a hard, durable, moisture and chemical resistant plastic. RF 68 is ideally suited for high solids formulations with low viscosity resins. It can be used in compliance with 21 CFR 175.300 and 21 CFR 176.170 as a component of FDA-compliant epoxy coatings, can cements and adhesives. 收起
RF 713 A/B Kit Resin Formulators (E.V. Roberts) RF 713 A/B Kit is a thixotropic epoxy adhesive system with good physical strength and high electrical conductivity. This material is designed to be used where hot solder applications are impractical or on parts which cannot be subjected to heat. RF 713 is...展开 RF 713 A/B Kit is a thixotropic epoxy adhesive system with good physical strength and high electrical conductivity. This material is designed to be used where hot solder applications are impractical or on parts which cannot be subjected to heat. RF 713 is also effective as a shielding material. 收起
RF 77 Resin Formulators (E.V. Roberts) RF 77 is a low-viscosity amine curing agent for use with liquid epoxy resins that provides rapid cure at ambient and temperatures as low as 32°F (0°C). It can also be used to accelerate other amine hardeners.
RF 81 Resin Formulators (E.V. Roberts) RF 81 is a unique low viscosity polyamide hardener. It is compatible with most epoxy resins without induction and offers a shorter gel time than standard polyamide hardeners.
RF 825 A/B Resin Formulators (E.V. Roberts) RF 825 A/B is a two component Epoxy compound used for potting electronic packages, generally with vacuum impregnation techniques. It is a high temperature resistant, low out gassing material which has been used in high voltage devices in space.
RF 9 Resin Formulators (E.V. Roberts) RF 9 is an accelerated polyamide hardener. It offers better chemical resistance and a higher service temperature than standard polyamides.
RF 912 A/B Kit Resin Formulators (E.V. Roberts) RF 912 A/B Kit is a high strength epoxy adhesive system for bonding a wide variety of substrates, including plastics. This product is thixotropic and can be used on vertical surfaces without excessive run out from the bond line. RF 912 has an open working...展开 RF 912 A/B Kit is a high strength epoxy adhesive system for bonding a wide variety of substrates, including plastics. This product is thixotropic and can be used on vertical surfaces without excessive run out from the bond line. RF 912 has an open working time of 30 to 45 minutes and will cure at room temperature. 收起
RF 913 A/B Resin Formulators (E.V. Roberts) RF 913 A/B is a toughened epoxy adhesive system for bonding a wide variety of substrates. This product is semi-thixotropic, and so can be used on vertical surfaces without excessive bleed from the bond line. RF 913 A/B has excellent adhesion to metal and ...展开 RF 913 A/B is a toughened epoxy adhesive system for bonding a wide variety of substrates. This product is semi-thixotropic, and so can be used on vertical surfaces without excessive bleed from the bond line. RF 913 A/B has excellent adhesion to metal and plastic substrates as well as excellent water soak and environmental resistance. RF 913 is available in green (blue/yellow) and black. An electrical grade is also available. 收起
RF 955 A/B Resin Formulators (E.V. Roberts) RF 955 A/B is an easy to mix, stiff paste, two-part, high strength, epoxy fairing compound. It is designed to hold up to a 1 inch peak before cure and is easily smoothed to a paintable surface. This high strength material bonds well to a wide variety of s...展开 RF 955 A/B is an easy to mix, stiff paste, two-part, high strength, epoxy fairing compound. It is designed to hold up to a 1 inch peak before cure and is easily smoothed to a paintable surface. This high strength material bonds well to a wide variety of substrates, including most metals and most rigid plastics. 收起