| AC-21 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-21 is a modified amino saline primarily used as an adhesion promoter and comes as a light yellowish liquid. It can be used to enhance polymeric coatings, and as a binder to glass and metallic substrate. It can also be used as a coating material for epo...展开 AC-21 is a modified amino saline primarily used as an adhesion promoter and comes as a light yellowish liquid. It can be used to enhance polymeric coatings, and as a binder to glass and metallic substrate. It can also be used as a coating material for epoxy, silicone, acrylic and polyurethane. 收起 | |
| AC-62 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-62 is a N-β-aminoethylaminopropyl trimethoxysilane with the chemical formula of H2NC2H4NHC3H6Si(OCH3)3 and comes as a clear to slightly yellowish liquid. Primarily used as a coupling agent in mineral reinforced Nylon 6, Nylon 66, PBT. AC-62 can be used...展开 AC-62 is a N-β-aminoethylaminopropyl trimethoxysilane with the chemical formula of H2NC2H4NHC3H6Si(OCH3)3 and comes as a clear to slightly yellowish liquid. Primarily used as a coupling agent in mineral reinforced Nylon 6, Nylon 66, PBT. AC-62 can be used as an additive in foundry and abrasive thermosetting resin. 收起 | |
| AC-626 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-626 is an N,N Bis{3-(trimethoxysilyl)propyl} ethylene diamine with the chemical formula CH2NH(CH2)3Si(OCH3)3 and comes as a clear to slightly yellowish liquid. It is primarily used as a coupling agent in mineral reinforced Nylon 6, Nylon 66, PBT. AC-62...展开 AC-626 is an N,N Bis{3-(trimethoxysilyl)propyl} ethylene diamine with the chemical formula CH2NH(CH2)3Si(OCH3)3 and comes as a clear to slightly yellowish liquid. It is primarily used as a coupling agent in mineral reinforced Nylon 6, Nylon 66, PBT. AC-626 can also be used as an additive in foundry and abrasive thermosetting resin. 收起 | |
| AC-63 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-63 is a γ-Methacryloxypropyl trimethoxysilane and comes as a clear, colorless liquid. Primarily used as an additive in mineral reinforced PET, AC-63 can be used to improve adhesion and coupling in free radical cured resin to inorganic glass fibers, cla...展开 AC-63 is a γ-Methacryloxypropyl trimethoxysilane and comes as a clear, colorless liquid. Primarily used as an additive in mineral reinforced PET, AC-63 can be used to improve adhesion and coupling in free radical cured resin to inorganic glass fibers, clay and silicas. 收起 | |
| AC-65 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-65 is a γ-Aminopropyl triethoxysilane with the chemical formula H2NC3H6Si(OC2H5)3 and comes as a clear to slightly yellowish liquid. Primarily used as a primer or additive in phenolic resin. It can be used as a pre-treatment in filler and pigments for ...展开 AC-65 is a γ-Aminopropyl triethoxysilane with the chemical formula H2NC3H6Si(OC2H5)3 and comes as a clear to slightly yellowish liquid. Primarily used as a primer or additive in phenolic resin. It can be used as a pre-treatment in filler and pigments for adhesive and sealant production. 收起 | |
| AC-66 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-66 is a γ-Glycidopropyl trimethoxysilane with the chemical formula CH2OCHCH2OC3H6Si(OCH3)3 and comes as a clear, colorless liquid. Primarily used as an additive to improve acrylic emulsion adhesion, AC-66 can be used as an adhesion promotor in polymer ...展开 AC-66 is a γ-Glycidopropyl trimethoxysilane with the chemical formula CH2OCHCH2OC3H6Si(OCH3)3 and comes as a clear, colorless liquid. Primarily used as an additive to improve acrylic emulsion adhesion, AC-66 can be used as an adhesion promotor in polymer to glass and metallic substrates. 收起 | |
| AC-661 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-661 is a γ-Glycidopropyl methyl dimethoxysilane with the chemical formula CH2OCHCH2OC3H6SiCH3(OCH3)2 and comes as a clear colorless liquid. Primarily used as an additive to improve acrylic emulsion adhesion, AC-661 can be used as an adhesion promotor i...展开 AC-661 is a γ-Glycidopropyl methyl dimethoxysilane with the chemical formula CH2OCHCH2OC3H6SiCH3(OCH3)2 and comes as a clear colorless liquid. Primarily used as an additive to improve acrylic emulsion adhesion, AC-661 can be used as an adhesion promotor in polymer to glass as well as in metallic substrates. 收起 | |
| AC-662 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-662 is a γ-Glycidopropyl methyl diethoxysilane with the chemical formula of CH2OCHCH2OC3H6SiCH3(OC2H5)2 and comes as clear colorless liquid. Primarily used as an additive to enhance adhesion in acrylic emulsion system, AC-662 can be used as an adhesion...展开 AC-662 is a γ-Glycidopropyl methyl diethoxysilane with the chemical formula of CH2OCHCH2OC3H6SiCH3(OC2H5)2 and comes as clear colorless liquid. Primarily used as an additive to enhance adhesion in acrylic emulsion system, AC-662 can be used as an adhesion promoter to enhance polymer coating as well as a binder to glass and metal substrates. 收起 | |
| AC-66(E) | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-66(E) is a γ-Glycidoxypropyl triethoxysilane with the chemical formula CH2OCHCH2OC3H6Si(OCH5)3 and comes as a clear, colorless liquid. Primarily used as an additive to enhance adhesion in acrylic emulsion system, AC-66(E) can be used as an adhesion pro...展开 AC-66(E) is a γ-Glycidoxypropyl triethoxysilane with the chemical formula CH2OCHCH2OC3H6Si(OCH5)3 and comes as a clear, colorless liquid. Primarily used as an additive to enhance adhesion in acrylic emulsion system, AC-66(E) can be used as an adhesion promotor to enhance polymer coating and as a binder to glass and metal substrates. 收起 | |
| AC-67 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-67 is an β-(3,4-Epoxycyclohexyl) ethyltrimethoxysilane with the chemical structure CH2CH2Si(OCH3)3 and comes as a clear, colorless liquid. Primarily used in the production of adhesives and sealants, AC-67 can be used as an additive to improve acrylic e...展开 AC-67 is an β-(3,4-Epoxycyclohexyl) ethyltrimethoxysilane with the chemical structure CH2CH2Si(OCH3)3 and comes as a clear, colorless liquid. Primarily used in the production of adhesives and sealants, AC-67 can be used as an additive to improve acrylic emulsions as well as used for filler in glass fiber surface treatments. 收起 | |
| AC-68 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-68 is a β-(3,4-Epoxycyclohexyl)ethyltriethoxysilane with the chemical structure CH2CH2Si(OC2H5)3 and comes as a clear, transparent liquid. Primarily used in the production of adhesives and sealants, AC-68 can be used as an additive to improve acrylic e...展开 AC-68 is a β-(3,4-Epoxycyclohexyl)ethyltriethoxysilane with the chemical structure CH2CH2Si(OC2H5)3 and comes as a clear, transparent liquid. Primarily used in the production of adhesives and sealants, AC-68 can be used as an additive to improve acrylic emulsion in adhesives as well as a filler in glass fiber surface treatments. 收起 | |
| AC-703 Anionic Fluorocarbon Surfactant | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-703 Anionic Fluorocarbon Surfactant is an anionic surfactant that is primarily used as a wetting, dispersing and leveling agent in paints, inks, dyes and leather production. This product has a high temperature and alkali resistance and can be used in s...展开 AC-703 Anionic Fluorocarbon Surfactant is an anionic surfactant that is primarily used as a wetting, dispersing and leveling agent in paints, inks, dyes and leather production. This product has a high temperature and alkali resistance and can be used in strong base or strong oxidant media. It is a brownish, clear liquid in appearance. 收起 | |
| AC-75 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-75 is a Vinyl triethoxysilane with the chemical structure CH2=CHSi(OC2H5)3, and comes as a colorless transparent liquid. Primarily used in the production of vinyl and acrylic co-polymers, AC-75 can be used as an adhesion promoter in polymers for glass ...展开 AC-75 is a Vinyl triethoxysilane with the chemical structure CH2=CHSi(OC2H5)3, and comes as a colorless transparent liquid. Primarily used in the production of vinyl and acrylic co-polymers, AC-75 can be used as an adhesion promoter in polymers for glass / metallic substrates. 收起 | |
| AC-76 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-76 is a Vinyltriisopropoxysilane with the chemical formula C11H24O3Si and comes as a clear and colorless liquid. It is primarily used as a monomer in acrylic emulsions in the production of paints and coatings. | |
| AC-77 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-77 is a Vinyltris-(2-methoxyethoxysilane) with the chemical formula H2C=CHSi(OCH2CH2OCH3)3 and comes as a clear liquid. Primarily used as a cross-linker in vinyl-acrylic emulsion systems, AC-77 can be used as an additive mineral filled polymers and oth...展开 AC-77 is a Vinyltris-(2-methoxyethoxysilane) with the chemical formula H2C=CHSi(OCH2CH2OCH3)3 and comes as a clear liquid. Primarily used as a cross-linker in vinyl-acrylic emulsion systems, AC-77 can be used as an additive mineral filled polymers and other rubber chemicals as an adhesion promoter for paints and coatings. 收起 | |
| APMS Fluid A 1000 | Ark (Fogang) Chemicals Industry Co., Ltd. | APMS Fluid A 1000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a mod...展开 APMS Fluid A 1000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a modifier and curing agent for epoxy resins and coatings. 收起 | |
| APMS Fluid A 10000 | Ark (Fogang) Chemicals Industry Co., Ltd. | APMS Fluid A 10000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a mo...展开 APMS Fluid A 10000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a modifier and curing agent for epoxy resins and coatings. 收起 | |
| APMS Fluid A 2000 | Ark (Fogang) Chemicals Industry Co., Ltd. | APMS Fluid A 2000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a mod...展开 APMS Fluid A 2000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a modifier and curing agent for epoxy resins and coatings. 收起 | |
| APMS Fluid A 5000 | Ark (Fogang) Chemicals Industry Co., Ltd. | APMS Fluid A 5000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a mod...展开 APMS Fluid A 5000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a modifier and curing agent for epoxy resins and coatings. 收起 | |
| AquaFLON® 178G (PTFE / Synthetic Wax Aqueous Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 178G is PTFE (polytetrafluoroethylene) and synthetic wax and in an aqueous dispersion. AquaFLON® 178G is recommended for water-based industrial coatings. | |
| AquaFLON® 50 (PTFE Aqueous Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in coatings such as water based overprint varnishes for can coatings. Due to its extremely small particle size, AquaFLON® 50 ...展开 AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in coatings such as water based overprint varnishes for can coatings. Due to its extremely small particle size, AquaFLON® 50 is most suitable for thin film applications. 收起 | |
| AquaFLON® 52 (PTFE Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 52 is PTFE (polytetrafluoroethylene) in a non-ionic aqueous dispersion. AquaFLON® 52 is recommended for water-based specialty coatings. | |
| AquaFLON® 605 (PTFE / Synthetic Wax Aqueous Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 605 is PTFE (polytetrafluoroethylene) and spherical synthetic wax in an aqueous dispersion. AquaFLON® 605 is recommended for a wide variety of specality applications in coatings. | |
| AquaFLON® 797 (PTFE and Synthetic Wax Aqueous Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® 797 is PTFE (polytetrafluoroethylene) and synthetic wax in a non-ionic aqueous dispersion. AquaFLON® 797 is recommended for a wide variety of water based industrial coatings, wood finishes, and composite treatments. | |
| AquaFLON® MG (PTFE / Carnauba Wax Aqueous Dispersion) | Shamrock Technologies, Inc. 三叶科技 | AquaFLON® MG is PTFE (polytetrafluoroethylene) and carnauba wax in an aqueous dispersion. | |
| BAL 101 H WS-70 | Bonyan Kala Chemie Co. | BAL 101 H WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 800-1500 stoke at 25°C and is used in industrial varnishes, wood and metal coatings, and g...展开 BAL 101 H WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 800-1500 stoke at 25°C and is used in industrial varnishes, wood and metal coatings, and gloss and semi gloss architectural paints. 收起 | |
| BAL 101 L WS-70 | Bonyan Kala Chemie Co. | BAL 101 L WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 350-650 stoke at 25°C and is used in industrial varnishes, metal structural coatings, and ...展开 BAL 101 L WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 350-650 stoke at 25°C and is used in industrial varnishes, metal structural coatings, and gloss and semi gloss architectural paints. 收起 | |
| BAL 102 WS-70 | Bonyan Kala Chemie Co. | BAL 102 WS-70 is a long oil alkyd resin that is used for its coverage, drying, gloss retention, pigment wetting, and dispersing properties. This product has a viscosity of 250-500 stoke at 25°C and is mainly used as a paste in architectural paints, and in...展开 BAL 102 WS-70 is a long oil alkyd resin that is used for its coverage, drying, gloss retention, pigment wetting, and dispersing properties. This product has a viscosity of 250-500 stoke at 25°C and is mainly used as a paste in architectural paints, and in architectural and industrial varnishes. 收起 | |
| BAL 103 WS-70 | Bonyan Kala Chemie Co. | BAL 103 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, pigment wetting, dispersing, and coverage properties. This product has a viscosity of 330-550 stoke at 25°C and is used in industrial varnishes, wood...展开 BAL 103 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, pigment wetting, dispersing, and coverage properties. This product has a viscosity of 330-550 stoke at 25°C and is used in industrial varnishes, wood and metal coatings, and gloss and semi gloss architectural paints. 收起 | |
| BAL 104 WS-70 | Bonyan Kala Chemie Co. | BAL 104 WS-70 is a long oil alkyd resin that is used for its solvent acceptation and filler accountability properties. This product has a viscosity of 1000-3500 stoke at 25°C and is mainly used in metal structural coatings, industrial, wood, metal, anti-c...展开 BAL 104 WS-70 is a long oil alkyd resin that is used for its solvent acceptation and filler accountability properties. This product has a viscosity of 1000-3500 stoke at 25°C and is mainly used in metal structural coatings, industrial, wood, metal, anti-corrosion and anti-rust primers. 收起 | |
| BAL 106 H WS-70 | Bonyan Kala Chemie Co. | BAL 106 H WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 500-1500 stoke at 25°C and is mainly used in metal structural,...展开 BAL 106 H WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 500-1500 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 106 L WS-70 | Bonyan Kala Chemie Co. | BAL 106 L WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, pigment wetting, good coverage and dispersing properties. This product has a viscosity of 300-500 stoke at 25°C and is mainly used in metal structural, wood, and metal...展开 BAL 106 L WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, pigment wetting, good coverage and dispersing properties. This product has a viscosity of 300-500 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, spray paints, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 108 WS-70 | Bonyan Kala Chemie Co. | BAL 108 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, solvent acceptation, good coverage and adhesion properties. This product has a viscosity of 500-1000 stoke at 25°C and is mainly used in metal structural, wood...展开 BAL 108 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, solvent acceptation, good coverage and adhesion properties. This product has a viscosity of 500-1000 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 116 WS-70 | Bonyan Kala Chemie Co. | BAL 116 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, hardness and filler accountability properties. This product has a viscosity of 1000-2500 stoke at 25°C and is mainly used in metal structural, wood,...展开 BAL 116 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, hardness and filler accountability properties. This product has a viscosity of 1000-2500 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 118 WS-70 | Bonyan Kala Chemie Co. | BAL 118 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 1000-3000 stoke at 25°C and is mainly used in wood and metal coa...展开 BAL 118 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 1000-3000 stoke at 25°C and is mainly used in wood and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 120 WS-70 | Bonyan Kala Chemie Co. | BAL 120 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and solvent acceptation properties. This product has a viscosity of 300-700 stoke at 25°C and is mainly used in wood and metal coating...展开 BAL 120 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and solvent acceptation properties. This product has a viscosity of 300-700 stoke at 25°C and is mainly used in wood and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAM 202 WS-55 | Bonyan Kala Chemie Co. | BAM 202 WS-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 350-900 stoke ...展开 BAM 202 WS-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 350-900 stoke at 25°C and is mainly used in zinc chromate primers, industrial machinery coatings, metal structural coatings, and spray, auto body repair and industrial air-drying paints. 收起 | |
| BAM 203 X-60 | Bonyan Kala Chemie Co. | BAM 203 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-100 stoke at...展开 BAM 203 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-100 stoke at 25°C and is mainly used in auto body repair paints, metallic paints, industrial machinery coatings, metal structural coatings, and industrial air-drying paints. 收起 | |
| BAM 204 WS-50 | Bonyan Kala Chemie Co. | BAM 204 WS-50 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 150-350 stoke ...展开 BAM 204 WS-50 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 150-350 stoke at 25°C and is mainly used in cabinet and spray paints, industrial air-drying paints, metal structural coatings, industrial machinery coatings, paste for architectural paints, and anti-corrosion primers. 收起 | |
| BAM 208 WSX-55 | Bonyan Kala Chemie Co. | BAM 208 WSX-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-180 stoke ...展开 BAM 208 WSX-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-180 stoke at 25°C and is mainly used in auto body repair paints, industrial machinery coatings, cabinet and spray paints, and industrial air-drying paints. 收起 | |
| BAM 212 X-60 | Bonyan Kala Chemie Co. | BAM 212 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 60-90 stoke at ...展开 BAM 212 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 60-90 stoke at 25°C and is mainly used in auto body repair paints, industrial machinery coatings, metallic paints, industrial air-drying paints, and paint paste. 收起 | |
| BAS 302 X-60 | Bonyan Kala Chemie Co. | BAS 302 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-80 stoke at 25°C and is mainly used in...展开 BAS 302 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-80 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, amino resin based stoving paints, acid curing coatings, and printing inks. 收起 | |
| BAS 305 X-50 | Bonyan Kala Chemie Co. | BAS 305 X-50 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 40-90 stoke at 25°C and is mainly used in...展开 BAS 305 X-50 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 40-90 stoke at 25°C and is mainly used in hammer finish paints, anti-corrosion primers, fast dry paints, and industrial air-drying paints. 收起 | |
| BAS 307 X-60 | Bonyan Kala Chemie Co. | BAS 307 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 250-450 stoke at 25°C and is mainly used ...展开 BAS 307 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 250-450 stoke at 25°C and is mainly used in nitro-cellulose lacquers, amino resin based stoving paints, acid curing coatings, and auto parts stoving paints. 收起 | |
| BAS 310 H X-60 | Bonyan Kala Chemie Co. | BAS 310 H X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 200-400 stoke at 25°C and is mainly use...展开 BAS 310 H X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 200-400 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, acid curing coatings, and anti-corrosion primers. 收起 | |
| BAS 310 L X-60 | Bonyan Kala Chemie Co. | BAS 310 L X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 100-200 stoke at 25°C and is mainly use...展开 BAS 310 L X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 100-200 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, acid curing coatings, and anti-corrosion primers. 收起 | |
| BAS 312 X-60 | Bonyan Kala Chemie Co. | BAS 312 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-120 stoke at 25°C and is mainly used i...展开 BAS 312 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-120 stoke at 25°C and is mainly used in nitro-cellulose paints, alkyd amin lacquers, and anti-corrosion primers. 收起 | |
| BAS 313 X-60 | Bonyan Kala Chemie Co. | BAS 313 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 600-1000 stoke at 25°C and is mainly used...展开 BAS 313 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 600-1000 stoke at 25°C and is mainly used in nitro-cellulose paints, alkyd amin lacquers, and anti-corrosion primers. 收起 | |
| BD-Ca-5 | Bonyan Kala Chemie Co. | BD-Ca-5 is a drier that appears as a clear yellow liquid. This product is an auxiliary drier and has a metal content of 5±0.2. It is often used for air through and surface drying systems. | |
| BD-Co-10 | Bonyan Kala Chemie Co. | BD-Co-10 is a drier that appears as a violet liquid. This product is an active oxidation drier and has a metal content of 10±0.2. It is often used as an accelerator for unsaturated polyester resins and in air drying systems. | |
| BD-Pb-32 | Bonyan Kala Chemie Co. | BD-Pb-32 is a drier that appears as a clear yellow liquid. This product is a through drier and has a metal content of 32±0.5. It is often used for air through and surface drying systems. | |
| BD-Zr-18 | Bonyan Kala Chemie Co. | BD-Zr-18 is a drier that appears as a light yellow liquid. This product is a through drier and has a metal content of 18±0.3. It is often used in air drying systems, metallic paints, metallic varnishes and coatings. | |
| BUP 612 | Bonyan Kala Chemie Co. | BUP 612 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a ...展开 BUP 612 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 550-750CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 615 | Bonyan Kala Chemie Co. | BUP 615 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, and good physical and mechanical properties after curing. This product has a viscosity of 380-480CP at 25°C and is commonly used in ...展开 BUP 615 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, and good physical and mechanical properties after curing. This product has a viscosity of 380-480CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 620 | Bonyan Kala Chemie Co. | BUP 620 is an unsaturated polyester resin that is used for its low color, excellent adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a visc...展开 BUP 620 is an unsaturated polyester resin that is used for its low color, excellent adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 400-650CP at 25°C and is commonly used in general purpose applications and goods that need high transparency. 收起 | |
| BUP 621 | Bonyan Kala Chemie Co. | BUP 621 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity...展开 BUP 621 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 380-480CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 623 | Bonyan Kala Chemie Co. | BUP 623 is an unsaturated polyester resin that is used for its good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited shrinkage, and filler appropriate accountability properties. This product has a v...展开 BUP 623 is an unsaturated polyester resin that is used for its good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited shrinkage, and filler appropriate accountability properties. This product has a viscosity of 500-700CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 624 | Bonyan Kala Chemie Co. | BUP 624 is an unsaturated polyester resin that is used for its low color, medium viscosity, good physical and mechanical properties after curing, resistant to UV, and filler appropriate accountability properties. This product has a viscosity of 450-700CP ...展开 BUP 624 is an unsaturated polyester resin that is used for its low color, medium viscosity, good physical and mechanical properties after curing, resistant to UV, and filler appropriate accountability properties. This product has a viscosity of 450-700CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 625 | Bonyan Kala Chemie Co. | BUP 625 is an unsaturated polyester resin that is used for its medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 350-500CP at 25°C and is commonly use...展开 BUP 625 is an unsaturated polyester resin that is used for its medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 350-500CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 626 | Bonyan Kala Chemie Co. | BUP 626 is an unsaturated polyester resin that is used for its low color, limited water absorption, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of ...展开 BUP 626 is an unsaturated polyester resin that is used for its low color, limited water absorption, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 450-650CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 629 | Bonyan Kala Chemie Co. | BUP 629 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosit...展开 BUP 629 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 700-1000CP at 25°C and is commonly used in general purpose applications and goods that need high transparency. 收起 | |
| BUP 630 | Bonyan Kala Chemie Co. | BUP 630 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, resistant to hydrolysis, and good flexibility and go...展开 BUP 630 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, resistant to hydrolysis, and good flexibility and good resistant to impact. This product has a viscosity of 450-700CP at 25°C and is commonly used in general purpose applications and gel coats. 收起 | |
| BUP 631 | Bonyan Kala Chemie Co. | BUP 631 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product ha...展开 BUP 631 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a viscosity of 700-1000CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 640 | Bonyan Kala Chemie Co. | BUP 640 is an unsaturated polyester resin that is used for its low gel time, low color, high viscosity, good physical and mechanical properties after curing, and good flexibility and good transparency. This product has a viscosity of 1200-1700CP at 25°C a...展开 BUP 640 is an unsaturated polyester resin that is used for its low gel time, low color, high viscosity, good physical and mechanical properties after curing, and good flexibility and good transparency. This product has a viscosity of 1200-1700CP at 25°C and is commonly used in general purpose applications and goods that need high transparency. 收起 | |
| BUP 643 | Bonyan Kala Chemie Co. | BUP 643 is an unsaturated polyester resin that is used for its low gel time, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistance to impact. This product has a viscosity of 900-1500CP at 25°C and...展开 BUP 643 is an unsaturated polyester resin that is used for its low gel time, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistance to impact. This product has a viscosity of 900-1500CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 660 | Bonyan Kala Chemie Co. | BUP 660 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a visc...展开 BUP 660 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a viscosity of 600-900CP at 25°C and is commonly used in general purpose applications and gel coats. 收起 | |
| BUP 665 | Bonyan Kala Chemie Co. | BUP 665 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a visc...展开 BUP 665 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a viscosity of 800-1200CP at 25°C and is commonly used in general purpose applications and gel coats. 收起 | |
| BUP 690 | Bonyan Kala Chemie Co. | BUP 690 is an unsaturated polyester resin that is used for its moderate gel time, low viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 300-450CP at 25°C and ...展开 BUP 690 is an unsaturated polyester resin that is used for its moderate gel time, low viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 300-450CP at 25°C and is commonly used in general purpose applications. 收起 | |
| CeraSPERSE 171 (Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | CeraSPERSE 171 is polyethylene wax compounded in refined linseed oil (VOC-free). CeraSPERSE 171 is recommended for use in UV topcoats. | |
| CeraSPERSE 174 (Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | CeraSPERSE 174 is PTFE (polytetrafluoroethylene) and polyethylene wax compounded in refined linseed oil. CeraSPERSE 171 is recommended for UV topcoats. | |
| CeraSPERSE 31 (Carnauba Wax Compound) | Shamrock Technologies, Inc. 三叶科技 | CeraSPERSE 31 is a carnauba wax compounded in Butyl Carbitol™ (Diethylene glycol monobutyl ether). This slow-evaporating, hydrophilic glycol ether provides compatibility with both polar and non-polar systems. CeraSPERSE 31 is recommended for solvent-based...展开 CeraSPERSE 31 is a carnauba wax compounded in Butyl Carbitol™ (Diethylene glycol monobutyl ether). This slow-evaporating, hydrophilic glycol ether provides compatibility with both polar and non-polar systems. CeraSPERSE 31 is recommended for solvent-based and water-based coatings. 收起 | |
| CeraSPERSE 321BG (PTFE / Wax Compound) | Shamrock Technologies, Inc. 三叶科技 | CeraSPERSE 321BG is a PTFE (polytetrafluoroethylene) and wax compound in Butyl CARBITOL™ (Diethylene glycol monobutyl ether). This slow-evaporating, hydrophilic glycol ether provides compatibility with both polar and non-polar systems. | |
| CeraSPERSE UV 636 (Carnauba Wax in UV Monomer) | Shamrock Technologies, Inc. 三叶科技 | CeraSPERSE UV 636 is carnauba wax dispersed in the UV monomer TRPGDA. | |
| CeraSPERSE UV 691 (Carnauba Wax in UV Monomer) | Shamrock Technologies, Inc. 三叶科技 | 以二缩三丙二醇二丙烯酸酯为溶剂的25%氧化聚乙烯蜡分散体。在滑爽、耐磨损的同时保持光泽度和透明度。 | |
| Fluoro P-77 (FEP Powder) | Shamrock Technologies, Inc. 三叶科技 | Fluoro P-77 is a FEP powder used in applications where release properties are required. Fluoro P77 offers high gloss and smoothness when fused. | |
| Fluororesin | Ark (Fogang) Chemicals Industry Co., Ltd. | Fluororesin is a brownish, clear liquid made with many hydroxyls. It has many applications in use as a lubricant, fiber-treatment, release, water-proofing agents as well as an antifouling, non-adheasive and optical coating agent. It can be used in paints ...展开 Fluororesin is a brownish, clear liquid made with many hydroxyls. It has many applications in use as a lubricant, fiber-treatment, release, water-proofing agents as well as an antifouling, non-adheasive and optical coating agent. It can be used in paints which are weather durable, antifouling or salt fog resistant. 收起 | |
| FluoroSLIP® 225 (PTFE / Synthetic Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | FluoroSLIP® 225 is a PTFE and low molecular weight synthetic wax blend. | |
| FluoroSLIP® 421 (PTFE / Synthetic Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | FluoroSLIP® 421 is a PTFE (polytetrafluoroethylene) and synthetic wax blend. | |
| FluoroSLIP® 511 (PTFE / Synthetic Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | 一种经过研磨的高分子聚乙烯和聚四氟乙烯混合物，是一种出色的耐磨损和滑爽配方，适用于罐头行业、木材及卷材涂料。 | |
| FluoroSLIP® 515 (PTFE / Synthetic Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | FluoroSLIP® 515 is a PTFE (polytetrafluoroethylene) and synthetic wax blend. | |
| FluoroSLIP® 533 (PTFE / Synthetic Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | FluoroSLIP® 533 is a PTFE and hydrophilic synthetic wax blend where the synthetic wax shows a uniform melting range peaking at 97°C. | |
| FluoroSLIP® 605 (PTFE / Synthetic Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | 一种高分子聚乙烯聚四氟乙烯混合物。FluoroSLIP 605具有超强的耐磨性和抗揉搓性，不打滑。 | |
| FluoroSLIP® 731MG (PTFE / Synthetic Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | 一种超细颗粒的高熔点蜡合金粉末和聚四氟乙烯混合物。具有提高滑爽度、硬度和防粘连的特性，且抗磨损、抗揉搓。 | |
| FluoroTEX 130 (PTFE Powder) | Shamrock Technologies, Inc. 三叶科技 | FluoroTEX 130 is an unirradiated polytetrafluoroethylene (PTFE) texturing agent with a mean particle size of 130 microns. The FluoroTEX Series are stable, compatible, and easily dispersed in all solvent, water-based radiation curable, powder, air dry, and...展开 FluoroTEX 130 is an unirradiated polytetrafluoroethylene (PTFE) texturing agent with a mean particle size of 130 microns. The FluoroTEX Series are stable, compatible, and easily dispersed in all solvent, water-based radiation curable, powder, air dry, and high temperature baked coatings. This product is ideal for systems that need high heat resistance, like coil coatings. 收起 | |
| FluoroTEX 50 (PTFE Powder) | Shamrock Technologies, Inc. 三叶科技 | FluoroTEX 50 is an unirradiated polytetrafluoroethylene (PTFE) texturing agent with a mean particle size of 50 microns. The FluoroTEX Series are stable, compatible, and easily dispersed in all solvent, water-based radiation curable, powder, air dry, and h...展开 FluoroTEX 50 is an unirradiated polytetrafluoroethylene (PTFE) texturing agent with a mean particle size of 50 microns. The FluoroTEX Series are stable, compatible, and easily dispersed in all solvent, water-based radiation curable, powder, air dry, and high temperature baked coatings. This product is ideal for systems that need high heat resistance, like coil coatings. 收起 | |
| FluoroTEX 90 (PTFE Powder) | Shamrock Technologies, Inc. 三叶科技 | FluoroTEX 90 is an unirradiated polytetrafluoroethylene (PTFE) texturing agent with a mean particle size of 90 microns. The FluoroTEX Series are stable, compatible, and easily dispersed in all solvent, water-based radiation curable, powder, air dry, and h...展开 FluoroTEX 90 is an unirradiated polytetrafluoroethylene (PTFE) texturing agent with a mean particle size of 90 microns. The FluoroTEX Series are stable, compatible, and easily dispersed in all solvent, water-based radiation curable, powder, air dry, and high temperature baked coatings. This product is ideal for systems that need high heat resistance, like coil coatings. 收起 | |
| Hydrocer 145 (Amide Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | 50%合成蜡水性分散体。用于织物、纸张、油墨和金属容器。 | |
| Hydrocer 257 (Synthetic Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | Hydrocer 257 is synthetic wax in a non-ionic aqueous dispersion recommened for water based coating systems. | |
| Hydrocer 357 (Spherical Synthetic Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | 50%水性高分子聚乙烯蜡分散体。具有滑度控制和耐磨损的特性，对光泽度有中等程度的影响，是一种非离子型表面活性剂，具备可分散性/相容性，在不使用主体树脂的情况下具有出色的储存稳定性。 | |
| Hydrocer™ 7112 (Synthetic Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | Hydrocer™ 7112 is a stable, aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems. | |
| Hydrocer 7206 (Synthetic Wax Dispersion) | Shamrock Technologies, Inc. 三叶科技 | Hydrocer 7206 is a stable, non-ionic aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems. | |
| Hydrocer DP-69 (Paraffin Wax Microdispersion) | Shamrock Technologies, Inc. 三叶科技 | Hydrocer DP-69 is paraffin wax in an aqueous microdispersion recommended for water based coating systems. | |
| Hydrocer EC 98 | Shamrock Technologies, Inc. 三叶科技 | Hydrocer EC 98 is an aqueous anionic emulsion of #1 carnauba wax. It is recommended as a slip and anti-mar additive for low pH polymers, such as polyvinyl acetate, polyvinyl chloride, polyvinylidene chloride and may be used with acid functional polymers. ...展开 Hydrocer EC 98 is an aqueous anionic emulsion of #1 carnauba wax. It is recommended as a slip and anti-mar additive for low pH polymers, such as polyvinyl acetate, polyvinyl chloride, polyvinylidene chloride and may be used with acid functional polymers. It also provides very good block mar resistance to OPVs and may reduce low temperature cracking. This emulsion can be post-added after letdown using mild agitation. 收起 | |
| Hydrocer EE 95 (Synthetic Wax Emulsion) | Shamrock Technologies, Inc. 三叶科技 | 一种阴离子高密度聚乙烯乳液。产品可提高抗磨损性和滑爽性；提高抗划痕、抗移印性及滑动角；满足迅速提高的抗水性要求。 | |
| Hydrocer EP 91 (Paraffin Wax Emulsion) | Shamrock Technologies, Inc. 三叶科技 | 石蜡水乳液。用于水性油墨和油漆时具有优异的耐水性。它通过一种独特的的乳化过程制备，不含亲水表面活性剂。 | |
| Hydrocer ER 77 (Polypropylene Emulsion) | Shamrock Technologies, Inc. 三叶科技 | 非离子聚乙烯乳液。推荐用作水性油墨和油漆的防滑助剂，可增大滑动角但不降低光泽。 | |
| Hydropel AF (EBS Wax Powder) | Shamrock Technologies, Inc. 三叶科技 | Hydropel AF is a micronized EBS (ethylene bisstearamide) wax powder showing multiple melting peaks ranging from 91 – 145°C. | |
| Hydropel GP (Wax Alloy) | Shamrock Technologies, Inc. 三叶科技 | Hydropel GP is a wax alloy showing multipile melting peaks ranging from 41 – 101°C. | |
| Hydropel QB (Paraffin / Synthetic Wax Blend) | Shamrock Technologies, Inc. 三叶科技 | 一种石蜡和合成蜡的混合物。憎水性可保持两年以上。由于蜡所固有的特性，该产品还可提高滑爽性和耐划伤性，对于沾尘性、光泽度和透明度的影响最小。 | |
| Neptune 1-N1 (Synthetic Wax) | Shamrock Technologies, Inc. 三叶科技 | Neptune 1-N1 is a medium MW synthetic wax treated to provide water wettability. Neptune 1-N1 is recommended for use in water based coatings. |
