| Advantage™ AM1512A | Ashland | Advantage™ AM1512A is a 100% active foam control agent designed specifically for use in water-based paint systems. It is a high efficiency, hydrocarbon oil-based antifoaming agent and is formulated to control foam at any point during manufacture, packagin...展开 Advantage™ AM1512A is a 100% active foam control agent designed specifically for use in water-based paint systems. It is a high efficiency, hydrocarbon oil-based antifoaming agent and is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH and it is effective in the presence of many surfactants. Advantage™ AM1512A foam control agent is readily dispersible, has an outstanding long-term foam control persistency, and Advantage™ AW8176 defoamer is readily dispersible, has very good long-term persistency, and it is recommended for architectural paints, emulsions plasters, pigment/filler slurries, as well as industrial wood coatings. 收起 | |
| Aquaflow™ NHS-300 | Ashland | Aquaflow™ NHS-300 is a rheology modifier for waterborne architectural coatings. A solvent-free, nonionic associative polymer solution designed to increase high-shear viscosity and provide superior flow and leveling in latex paints. | |
| Aquaflow™ NHS-350 | Ashland | Aquaflow™ NHS-350 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. | |
| Aquaflow™ NHS-355 | Ashland | Aquaflow™ NHS-355 rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development...展开 Aquaflow™ NHS-355 rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build, and favorable brush drag. As an APEO-free and solvent-free product, Aquaflow™ NHS-355 rheology modifier is recommended for low VOC formulations. It is supplied as a low viscosity liquid for ease of handling. The performance of the product is independent of paint pH 收起 | |
| Aquaflow™ NHS-360 | Ashland | Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings, and is compatible with most modern latex resin systems and all sheens. This thickener prov...展开 Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings, and is compatible with most modern latex resin systems and all sheens. This thickener provides highly efficient ICI viscosity development, excellent film build, optimal flow and leveling and favorable brush drag. 收起 | |
| Aquaflow™ NLS-200 | Ashland | Aquaflow™ NLS-200 is a rheology modifier for waterborne architectural coatings. A nonionic associative polymer solution designed to build stormer viscosity and provide superior flow and leveling in latex paints. | |
| Aquaflow™ NLS-210 | Ashland | Aquaflow™ NLS-210 is a nonionic associative polymer solution designed to increase Stormer consistency and provide superior flow and leveling in waterborne paints and coatings. | |
| Aquaflow™ NLS-220 | Ashland | Aquaflow™ NLS-220 is a solvent free nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. It can be used with a wide variety of binder chemistries including v...展开 Aquaflow™ NLS-220 is a solvent free nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. It can be used with a wide variety of binder chemistries including vinyl acrylics, ethylene vinyl acetates, alkyd emulsions and in particular pure acrylics and styrene acrylics. It rapidly equilibrates to target low- or mid-shear viscosity with no negative impact on gloss or color stability. 收起 | |
| Aquaflow™ NMS-450 | Ashland | Aquaflow™ NMS-450 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. | |
| Aquaflow™ NMS-460E | Ashland | Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of S...展开 Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of Stormer (KU) viscosity along with high-shear (ICI) viscosity, and thus can be considered a mid-shear effective thickener that can function as the sole thickener in many paint formulation based on hydrophobic resins, such as acrylics and styrene acrylics. With more hydrophilic resins, such as vinyl acetate ethylene (VAE), optimized rheology may be achieved with Aquaflow™ NMS-460E rheology modifier alone or in combination with a supplemental KU driver. 收起 | |
| Aquaflow™ XLS-500 | Ashland | Aquaflow™ XLS-500 is non-ionic synthetic associative rheology modifier for low-VOC acrylic based paints & coatings. | |
| Aquaflow™ XLS-525 | Ashland | Aquaflow™ XLS-525 is a non-ionic synthetic associative rheology modifier for low-VOC paints and coatings. | |
| Aquaflow™ XLS-530 | Ashland | Aquaflow™ XLS-530 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. | |
| BAL 101 H WS-70 | Bonyan Kala Chemie Co. | BAL 101 H WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 800-1500 stoke at 25°C and is used in industrial varnishes, wood and metal coatings, and g...展开 BAL 101 H WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 800-1500 stoke at 25°C and is used in industrial varnishes, wood and metal coatings, and gloss and semi gloss architectural paints. 收起 | |
| BAL 101 L WS-70 | Bonyan Kala Chemie Co. | BAL 101 L WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 350-650 stoke at 25°C and is used in industrial varnishes, metal structural coatings, and ...展开 BAL 101 L WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 350-650 stoke at 25°C and is used in industrial varnishes, metal structural coatings, and gloss and semi gloss architectural paints. 收起 | |
| BAL 102 WS-70 | Bonyan Kala Chemie Co. | BAL 102 WS-70 is a long oil alkyd resin that is used for its coverage, drying, gloss retention, pigment wetting, and dispersing properties. This product has a viscosity of 250-500 stoke at 25°C and is mainly used as a paste in architectural paints, and in...展开 BAL 102 WS-70 is a long oil alkyd resin that is used for its coverage, drying, gloss retention, pigment wetting, and dispersing properties. This product has a viscosity of 250-500 stoke at 25°C and is mainly used as a paste in architectural paints, and in architectural and industrial varnishes. 收起 | |
| BAL 103 WS-70 | Bonyan Kala Chemie Co. | BAL 103 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, pigment wetting, dispersing, and coverage properties. This product has a viscosity of 330-550 stoke at 25°C and is used in industrial varnishes, wood...展开 BAL 103 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, pigment wetting, dispersing, and coverage properties. This product has a viscosity of 330-550 stoke at 25°C and is used in industrial varnishes, wood and metal coatings, and gloss and semi gloss architectural paints. 收起 | |
| BAL 104 WS-70 | Bonyan Kala Chemie Co. | BAL 104 WS-70 is a long oil alkyd resin that is used for its solvent acceptation and filler accountability properties. This product has a viscosity of 1000-3500 stoke at 25°C and is mainly used in metal structural coatings, industrial, wood, metal, anti-c...展开 BAL 104 WS-70 is a long oil alkyd resin that is used for its solvent acceptation and filler accountability properties. This product has a viscosity of 1000-3500 stoke at 25°C and is mainly used in metal structural coatings, industrial, wood, metal, anti-corrosion and anti-rust primers. 收起 | |
| BAL 106 H WS-70 | Bonyan Kala Chemie Co. | BAL 106 H WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 500-1500 stoke at 25°C and is mainly used in metal structural,...展开 BAL 106 H WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 500-1500 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 106 L WS-70 | Bonyan Kala Chemie Co. | BAL 106 L WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, pigment wetting, good coverage and dispersing properties. This product has a viscosity of 300-500 stoke at 25°C and is mainly used in metal structural, wood, and metal...展开 BAL 106 L WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, pigment wetting, good coverage and dispersing properties. This product has a viscosity of 300-500 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, spray paints, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 108 WS-70 | Bonyan Kala Chemie Co. | BAL 108 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, solvent acceptation, good coverage and adhesion properties. This product has a viscosity of 500-1000 stoke at 25°C and is mainly used in metal structural, wood...展开 BAL 108 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, solvent acceptation, good coverage and adhesion properties. This product has a viscosity of 500-1000 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 116 WS-70 | Bonyan Kala Chemie Co. | BAL 116 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, hardness and filler accountability properties. This product has a viscosity of 1000-2500 stoke at 25°C and is mainly used in metal structural, wood,...展开 BAL 116 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, hardness and filler accountability properties. This product has a viscosity of 1000-2500 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 118 WS-70 | Bonyan Kala Chemie Co. | BAL 118 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 1000-3000 stoke at 25°C and is mainly used in wood and metal coa...展开 BAL 118 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 1000-3000 stoke at 25°C and is mainly used in wood and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 120 WS-70 | Bonyan Kala Chemie Co. | BAL 120 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and solvent acceptation properties. This product has a viscosity of 300-700 stoke at 25°C and is mainly used in wood and metal coating...展开 BAL 120 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and solvent acceptation properties. This product has a viscosity of 300-700 stoke at 25°C and is mainly used in wood and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAM 202 WS-55 | Bonyan Kala Chemie Co. | BAM 202 WS-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 350-900 stoke ...展开 BAM 202 WS-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 350-900 stoke at 25°C and is mainly used in zinc chromate primers, industrial machinery coatings, metal structural coatings, and spray, auto body repair and industrial air-drying paints. 收起 | |
| BAM 203 X-60 | Bonyan Kala Chemie Co. | BAM 203 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-100 stoke at...展开 BAM 203 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-100 stoke at 25°C and is mainly used in auto body repair paints, metallic paints, industrial machinery coatings, metal structural coatings, and industrial air-drying paints. 收起 | |
| BAM 204 WS-50 | Bonyan Kala Chemie Co. | BAM 204 WS-50 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 150-350 stoke ...展开 BAM 204 WS-50 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 150-350 stoke at 25°C and is mainly used in cabinet and spray paints, industrial air-drying paints, metal structural coatings, industrial machinery coatings, paste for architectural paints, and anti-corrosion primers. 收起 | |
| BAM 208 WSX-55 | Bonyan Kala Chemie Co. | BAM 208 WSX-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-180 stoke ...展开 BAM 208 WSX-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-180 stoke at 25°C and is mainly used in auto body repair paints, industrial machinery coatings, cabinet and spray paints, and industrial air-drying paints. 收起 | |
| BAM 212 X-60 | Bonyan Kala Chemie Co. | BAM 212 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 60-90 stoke at ...展开 BAM 212 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 60-90 stoke at 25°C and is mainly used in auto body repair paints, industrial machinery coatings, metallic paints, industrial air-drying paints, and paint paste. 收起 | |
| BAS 302 X-60 | Bonyan Kala Chemie Co. | BAS 302 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-80 stoke at 25°C and is mainly used in...展开 BAS 302 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-80 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, amino resin based stoving paints, acid curing coatings, and printing inks. 收起 | |
| BAS 305 X-50 | Bonyan Kala Chemie Co. | BAS 305 X-50 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 40-90 stoke at 25°C and is mainly used in...展开 BAS 305 X-50 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 40-90 stoke at 25°C and is mainly used in hammer finish paints, anti-corrosion primers, fast dry paints, and industrial air-drying paints. 收起 | |
| BAS 307 X-60 | Bonyan Kala Chemie Co. | BAS 307 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 250-450 stoke at 25°C and is mainly used ...展开 BAS 307 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 250-450 stoke at 25°C and is mainly used in nitro-cellulose lacquers, amino resin based stoving paints, acid curing coatings, and auto parts stoving paints. 收起 | |
| BAS 310 H X-60 | Bonyan Kala Chemie Co. | BAS 310 H X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 200-400 stoke at 25°C and is mainly use...展开 BAS 310 H X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 200-400 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, acid curing coatings, and anti-corrosion primers. 收起 | |
| BAS 310 L X-60 | Bonyan Kala Chemie Co. | BAS 310 L X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 100-200 stoke at 25°C and is mainly use...展开 BAS 310 L X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 100-200 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, acid curing coatings, and anti-corrosion primers. 收起 | |
| BAS 312 X-60 | Bonyan Kala Chemie Co. | BAS 312 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-120 stoke at 25°C and is mainly used i...展开 BAS 312 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-120 stoke at 25°C and is mainly used in nitro-cellulose paints, alkyd amin lacquers, and anti-corrosion primers. 收起 | |
| BAS 313 X-60 | Bonyan Kala Chemie Co. | BAS 313 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 600-1000 stoke at 25°C and is mainly used...展开 BAS 313 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 600-1000 stoke at 25°C and is mainly used in nitro-cellulose paints, alkyd amin lacquers, and anti-corrosion primers. 收起 | |
| BD-Ca-5 | Bonyan Kala Chemie Co. | BD-Ca-5 is a drier that appears as a clear yellow liquid. This product is an auxiliary drier and has a metal content of 5±0.2. It is often used for air through and surface drying systems. | |
| BD-Co-10 | Bonyan Kala Chemie Co. | BD-Co-10 is a drier that appears as a violet liquid. This product is an active oxidation drier and has a metal content of 10±0.2. It is often used as an accelerator for unsaturated polyester resins and in air drying systems. | |
| BD-Pb-32 | Bonyan Kala Chemie Co. | BD-Pb-32 is a drier that appears as a clear yellow liquid. This product is a through drier and has a metal content of 32±0.5. It is often used for air through and surface drying systems. | |
| BD-Zr-18 | Bonyan Kala Chemie Co. | BD-Zr-18 is a drier that appears as a light yellow liquid. This product is a through drier and has a metal content of 18±0.3. It is often used in air drying systems, metallic paints, metallic varnishes and coatings. | |
| Black Manganese NB-2 | Changzhou Huazhu Pigment Co., Ltd. | Black Manganese NB-2 is a black powdered, inorganic metal oxide pigment exhibiting high light fastness and good weather resistance. It has a heat resistance rating of 800° C (1472° F) making it suitable for use in high-temperature printing inks and cerami...展开 Black Manganese NB-2 is a black powdered, inorganic metal oxide pigment exhibiting high light fastness and good weather resistance. It has a heat resistance rating of 800° C (1472° F) making it suitable for use in high-temperature printing inks and ceramic vitreous enamel coatings. 收起 | |
| BUP 612 | Bonyan Kala Chemie Co. | BUP 612 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a ...展开 BUP 612 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 550-750CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 615 | Bonyan Kala Chemie Co. | BUP 615 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, and good physical and mechanical properties after curing. This product has a viscosity of 380-480CP at 25°C and is commonly used in ...展开 BUP 615 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, and good physical and mechanical properties after curing. This product has a viscosity of 380-480CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 620 | Bonyan Kala Chemie Co. | BUP 620 is an unsaturated polyester resin that is used for its low color, excellent adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a visc...展开 BUP 620 is an unsaturated polyester resin that is used for its low color, excellent adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 400-650CP at 25°C and is commonly used in general purpose applications and goods that need high transparency. 收起 | |
| BUP 621 | Bonyan Kala Chemie Co. | BUP 621 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity...展开 BUP 621 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 380-480CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 623 | Bonyan Kala Chemie Co. | BUP 623 is an unsaturated polyester resin that is used for its good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited shrinkage, and filler appropriate accountability properties. This product has a v...展开 BUP 623 is an unsaturated polyester resin that is used for its good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited shrinkage, and filler appropriate accountability properties. This product has a viscosity of 500-700CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 624 | Bonyan Kala Chemie Co. | BUP 624 is an unsaturated polyester resin that is used for its low color, medium viscosity, good physical and mechanical properties after curing, resistant to UV, and filler appropriate accountability properties. This product has a viscosity of 450-700CP ...展开 BUP 624 is an unsaturated polyester resin that is used for its low color, medium viscosity, good physical and mechanical properties after curing, resistant to UV, and filler appropriate accountability properties. This product has a viscosity of 450-700CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 625 | Bonyan Kala Chemie Co. | BUP 625 is an unsaturated polyester resin that is used for its medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 350-500CP at 25°C and is commonly use...展开 BUP 625 is an unsaturated polyester resin that is used for its medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 350-500CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 626 | Bonyan Kala Chemie Co. | BUP 626 is an unsaturated polyester resin that is used for its low color, limited water absorption, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of ...展开 BUP 626 is an unsaturated polyester resin that is used for its low color, limited water absorption, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 450-650CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 629 | Bonyan Kala Chemie Co. | BUP 629 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosit...展开 BUP 629 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 700-1000CP at 25°C and is commonly used in general purpose applications and goods that need high transparency. 收起 | |
| BUP 630 | Bonyan Kala Chemie Co. | BUP 630 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, resistant to hydrolysis, and good flexibility and go...展开 BUP 630 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, resistant to hydrolysis, and good flexibility and good resistant to impact. This product has a viscosity of 450-700CP at 25°C and is commonly used in general purpose applications and gel coats. 收起 | |
| BUP 631 | Bonyan Kala Chemie Co. | BUP 631 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product ha...展开 BUP 631 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a viscosity of 700-1000CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 640 | Bonyan Kala Chemie Co. | BUP 640 is an unsaturated polyester resin that is used for its low gel time, low color, high viscosity, good physical and mechanical properties after curing, and good flexibility and good transparency. This product has a viscosity of 1200-1700CP at 25°C a...展开 BUP 640 is an unsaturated polyester resin that is used for its low gel time, low color, high viscosity, good physical and mechanical properties after curing, and good flexibility and good transparency. This product has a viscosity of 1200-1700CP at 25°C and is commonly used in general purpose applications and goods that need high transparency. 收起 | |
| BUP 643 | Bonyan Kala Chemie Co. | BUP 643 is an unsaturated polyester resin that is used for its low gel time, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistance to impact. This product has a viscosity of 900-1500CP at 25°C and...展开 BUP 643 is an unsaturated polyester resin that is used for its low gel time, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistance to impact. This product has a viscosity of 900-1500CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 660 | Bonyan Kala Chemie Co. | BUP 660 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a visc...展开 BUP 660 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a viscosity of 600-900CP at 25°C and is commonly used in general purpose applications and gel coats. 收起 | |
| BUP 665 | Bonyan Kala Chemie Co. | BUP 665 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a visc...展开 BUP 665 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a viscosity of 800-1200CP at 25°C and is commonly used in general purpose applications and gel coats. 收起 | |
| BUP 690 | Bonyan Kala Chemie Co. | BUP 690 is an unsaturated polyester resin that is used for its moderate gel time, low viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 300-450CP at 25°C and ...展开 BUP 690 is an unsaturated polyester resin that is used for its moderate gel time, low viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 300-450CP at 25°C and is commonly used in general purpose applications. 收起 | |
| Cobalt Blue PB28 | Changzhou Huazhu Pigment Co., Ltd. | Cobalt Blue PB28 is a black powdered, inorganic metal oxide pigment exhibiting high light fastness and good weather resistance. It has a heat resistance rating of 800° C (1472° F) making it suitable for use in high-temperature printing inks and ceramic vi...展开 Cobalt Blue PB28 is a black powdered, inorganic metal oxide pigment exhibiting high light fastness and good weather resistance. It has a heat resistance rating of 800° C (1472° F) making it suitable for use in high-temperature printing inks and ceramic vitreous enamel coatings. 收起 | |
| Cobalt Blue PB36 | Changzhou Huazhu Pigment Co., Ltd. | Cobalt Blue PB36 is a black powdered, inorganic metal oxide pigment exhibiting high light fastness and good weather resistance. It has a heat resistance rating of 800° C (1472° F) making it suitable for use in high-temperature printing inks and ceramic vi...展开 Cobalt Blue PB36 is a black powdered, inorganic metal oxide pigment exhibiting high light fastness and good weather resistance. It has a heat resistance rating of 800° C (1472° F) making it suitable for use in high-temperature printing inks and ceramic vitreous enamel coatings. 收起 | |
| Copper Chrome Black NB-1 | Changzhou Huazhu Pigment Co., Ltd. | Copper Chrome Black NB-1 is a black powdered, inorganic metal oxide pigment exhibiting high light fastness and good weather resistance. It has a heat resistance rating of 800° C (1472° F) making it suitable for use in high-temperature printing inks and ce...展开 Copper Chrome Black NB-1 is a black powdered, inorganic metal oxide pigment exhibiting high light fastness and good weather resistance. It has a heat resistance rating of 800° C (1472° F) making it suitable for use in high-temperature printing inks and ceramic vitreous enamel coatings. 收起 | |
| Crystal Blue HE-765 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Blue HE-765 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 25-250 microns and is reflective blue, with a transmission color of orange. It can be used for vehicle, architectural, p...展开 Crystal Blue HE-765 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 25-250 microns and is reflective blue, with a transmission color of orange. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Blue HZ-745 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Blue HZ-745 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective blue, with a transmission color of orange. It can be used for vehicle, architectural, p...展开 Crystal Blue HZ-745 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective blue, with a transmission color of orange. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Blue HZ-785 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Blue HZ-785 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective blue, with a transmission color of orange. It can be used for vehicle, architectural, p...展开 Crystal Blue HZ-785 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective blue, with a transmission color of orange. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Gold HZ-741 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Gold HZ-741 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective gold, with a transmission color of pure blue. It can be used for vehicle, architectural...展开 Crystal Gold HZ-741 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective gold, with a transmission color of pure blue. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Gold HZ-781 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Gold HZ-781 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective gold, with a transmission color of pure blue. It can be used for vehicle, architectural...展开 Crystal Gold HZ-781 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective gold, with a transmission color of pure blue. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Green HZ-746 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Green HZ-746 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective green, with a transmission color of rose pink. It can be used for vehicle, architectur...展开 Crystal Green HZ-746 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective green, with a transmission color of rose pink. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Green HZ-766 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Green HZ-766 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 25-250 microns and is reflective green, with a transmission color of rose pink. It can be used for vehicle, architectur...展开 Crystal Green HZ-766 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 25-250 microns and is reflective green, with a transmission color of rose pink. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Green HZ-786 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Green HZ-786 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective green, with a transmission color of rose pink. It can be used for vehicle, architectur...展开 Crystal Green HZ-786 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective green, with a transmission color of rose pink. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Red HZ-743 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Red HZ-743 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective red, with a transmission color of bluish green. It can be used for vehicle, architectura...展开 Crystal Red HZ-743 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective red, with a transmission color of bluish green. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Red HZ-763 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Red HZ-763 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 25-250 microns and is reflective red, with a transmission color of bluish green. It can be used for vehicle, architectura...展开 Crystal Red HZ-763 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 25-250 microns and is reflective red, with a transmission color of bluish green. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Red HZ-783 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Red HZ-783 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective red, with a transmission color of bluish green. It can be used for vehicle, architectura...展开 Crystal Red HZ-783 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective red, with a transmission color of bluish green. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Silver HZ-740 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Silver HZ-740 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective silver, with a transmission color of light brown. It can be used for vehicle, archite...展开 Crystal Silver HZ-740 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective silver, with a transmission color of light brown. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Silver HZ-780 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Silver HZ-780 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective silver, with a transmission color of light brown. It can be used for vehicle, archite...展开 Crystal Silver HZ-780 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective silver, with a transmission color of light brown. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Violet HE-764 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Violet HE-764 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 25-250 microns and is reflective violet, with a transmission color of light green. It can be used for vehicle, archite...展开 Crystal Violet HE-764 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 25-250 microns and is reflective violet, with a transmission color of light green. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Violet HZ-744 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Violet HZ-744 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective violet, with a transmission color of light green. It can be used for vehicle, archite...展开 Crystal Violet HZ-744 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective violet, with a transmission color of light green. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Violet HZ-784 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Violet HZ-784 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective violet, with a transmission color of light green. It can be used for vehicle, archite...展开 Crystal Violet HZ-784 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective violet, with a transmission color of light green. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Culminal™ C-types modified cellulose ethers | Ashland | Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plas...展开 Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plasters, fillers, adhesives and spackling compounds, cement and lime based plasters, tile cements and similar products. 收起 | |
| DA-1 | Changzhou Huazhu Pigment Co., Ltd. | DA-1 is a bright, conductive pigment in the form of a light gray powder. It has a particle size of less than 1 micron and a resistivity of ≤200Ω·cm. It can be mixed with other pigments to provide colorful conductive coatings for applications in printing i...展开 DA-1 is a bright, conductive pigment in the form of a light gray powder. It has a particle size of less than 1 micron and a resistivity of ≤200Ω·cm. It can be mixed with other pigments to provide colorful conductive coatings for applications in printing inks, coatings and paints where conductivity and good heat and chemical resistance are desired. 收起 | |
| Dextrol™ OC-110 | Ashland | Dextrol™ OC-110 is the free-acid form of a nonyl phenol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-15 | Ashland | Dextrol™ OC-15 is the free acid form of a nonyl phenol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-180 | Ashland | 它是一种乙氧基化脂肪醇磷酸酯的中和态（钾盐）。它设计用于为水性乳胶漆改善光泽度和颜色接受性 | |
| Dextrol™ OC-180HS Phosphate Ester Surfactant | Ashland | Dextrol™ OC-180HS表面活性剂是乙氧基脂肪醇磷酸酯的中和（钠盐）形式。它设计用于改善光泽度和在水性乳胶漆中的色彩接受度。根据配方的不同特点，这款产品还可以用作有助于减少颜料凝絮的补充分散剂。除了在乳胶漆中使用，Dextrol™ OC-180HS表面活性剂还可以提供普遍着色特性，有助于分散和稳定颜料，从而改善水基油漆的色彩接受度。 | |
| Dextrol™ OC-50 | Ashland | Dextrol™ OC-50 is the neutralized (sodium salt) form of a nonyl phenol ethoxylated phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. | |
| Dextrol™ OC-60 | Ashland | Dextrol™ OC-60 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-60EP | Ashland | Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...展开 Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-60EP surfactant can be neutralized using several organic or inorganic bases. Dextrol OC-60EP surfactant also imparts improved gloss and color acceptance in waterborne latex paints. 收起 | |
| Dextrol™ OC-70 | Ashland | Dextrol™ OC-70 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-70EP | Ashland | Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...展开 Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-70EP phosphate ester surfactant can be neutralized by the user using a number of organic or inorganic bases. 收起 | |
| DM-1 | Changzhou Huazhu Pigment Co., Ltd. | DM-1 is a bright, conductive pigment in the form of a light gray powder. It has a particle size of less than 25 microns and a resistivity of ≤200Ω·cm. It can be mixed with other pigments to provide colorful conductive coatings for applications in printing...展开 DM-1 is a bright, conductive pigment in the form of a light gray powder. It has a particle size of less than 25 microns and a resistivity of ≤200Ω·cm. It can be mixed with other pigments to provide colorful conductive coatings for applications in printing inks, coatings and paints where conductivity and good heat and chemical resistance are desired. 收起 | |
| DM-2 | Changzhou Huazhu Pigment Co., Ltd. | DM-2 is a bright, conductive pigment in the form of a light gray powder. It has a particle size of less than 60 microns and a resistivity of ≤200Ω·cm. It can be mixed with other pigments to provide colorful conductive coatings for applications in printing...展开 DM-2 is a bright, conductive pigment in the form of a light gray powder. It has a particle size of less than 60 microns and a resistivity of ≤200Ω·cm. It can be mixed with other pigments to provide colorful conductive coatings for applications in printing inks, coatings and paints where conductivity and good heat and chemical resistance are desired. 收起 | |
| Drewplus* L-3500 Foam Control Agent | Ashland | Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spr...展开 Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spray, air mix or HVLP. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. 收起 | |
| Drewplus™ L-3510 Foam Control Agent | Ashland | Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatib...展开 Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. 收起 | |
| Drewplus™ TS-4384 Foam Control Agent | Ashland | Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-glos...展开 Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss acrylic architectural paints, water- based parquet lacquers. Excellent results have also been obtained in acrylic anti- corrosive primers, flexographic printing inks and water-reducible alkyd based systems. Drewplus™ TS-4384 foam control agent is highly efficient and exhibits excellent persistency. 收起 | |
| Drewplus™ TS-4481 Foam Control Agent | Ashland | Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and c...展开 Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and compatibility. Since it functions as an air release agent it is particularly effective on microfoam in spray-applied industrial coatings. 收起 | |
| Fluorescent Yellow 8g | Nanjing Longxi Chemical Co., Ltd. | Fluorescent Yellow 8g, in the form of a yellow powder, has a molecular weight of 452.55. This product has main applications in coating and paint. | |
| Golden H-231 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-231 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 60 microns, with a green-gold luster effect. It can be used for vehicle, architectural, powder and other coating...展开 Golden H-231 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 60 microns, with a green-gold luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Golden H-232 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-232 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 5 to 25 microns, with a golden luster effect. It can be used for vehicle, architectural, powder and other coatings and...展开 Golden H-232 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 5 to 25 microns, with a golden luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Golden H-233 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-233 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 5 to 25 microns, with a red-gold luster effect. It can be used for vehicle, architectural, powder and other coatings a...展开 Golden H-233 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 5 to 25 microns, with a red-gold luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Golden H-234 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-234 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 5 to 25 microns, with a green-gold luster effect. It can be used for vehicle, architectural, powder and other coatings...展开 Golden H-234 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 5 to 25 microns, with a green-gold luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Golden H-236 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-236 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 60 microns, with a red-gold luster effect. It can be used for vehicle, architectural, powder and other coatings ...展开 Golden H-236 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 60 microns, with a red-gold luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Golden H-250 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-250 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 120 microns, with a golden luster effect. It can be used for vehicle, architectural, powder and other coatings a...展开 Golden H-250 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 120 microns, with a golden luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 |
