| BAL 101 H WS-70 | Bonyan Kala Chemie Co. | BAL 101 H WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 800-1500 stoke at 25°C and is used in industrial varnishes, wood and metal coatings, and g...展开 BAL 101 H WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 800-1500 stoke at 25°C and is used in industrial varnishes, wood and metal coatings, and gloss and semi gloss architectural paints. 收起 | |
| BAL 101 L WS-70 | Bonyan Kala Chemie Co. | BAL 101 L WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 350-650 stoke at 25°C and is used in industrial varnishes, metal structural coatings, and ...展开 BAL 101 L WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 350-650 stoke at 25°C and is used in industrial varnishes, metal structural coatings, and gloss and semi gloss architectural paints. 收起 | |
| BAL 102 WS-70 | Bonyan Kala Chemie Co. | BAL 102 WS-70 is a long oil alkyd resin that is used for its coverage, drying, gloss retention, pigment wetting, and dispersing properties. This product has a viscosity of 250-500 stoke at 25°C and is mainly used as a paste in architectural paints, and in...展开 BAL 102 WS-70 is a long oil alkyd resin that is used for its coverage, drying, gloss retention, pigment wetting, and dispersing properties. This product has a viscosity of 250-500 stoke at 25°C and is mainly used as a paste in architectural paints, and in architectural and industrial varnishes. 收起 | |
| BAL 103 WS-70 | Bonyan Kala Chemie Co. | BAL 103 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, pigment wetting, dispersing, and coverage properties. This product has a viscosity of 330-550 stoke at 25°C and is used in industrial varnishes, wood...展开 BAL 103 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, pigment wetting, dispersing, and coverage properties. This product has a viscosity of 330-550 stoke at 25°C and is used in industrial varnishes, wood and metal coatings, and gloss and semi gloss architectural paints. 收起 | |
| BAL 104 WS-70 | Bonyan Kala Chemie Co. | BAL 104 WS-70 is a long oil alkyd resin that is used for its solvent acceptation and filler accountability properties. This product has a viscosity of 1000-3500 stoke at 25°C and is mainly used in metal structural coatings, industrial, wood, metal, anti-c...展开 BAL 104 WS-70 is a long oil alkyd resin that is used for its solvent acceptation and filler accountability properties. This product has a viscosity of 1000-3500 stoke at 25°C and is mainly used in metal structural coatings, industrial, wood, metal, anti-corrosion and anti-rust primers. 收起 | |
| BAL 106 H WS-70 | Bonyan Kala Chemie Co. | BAL 106 H WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 500-1500 stoke at 25°C and is mainly used in metal structural,...展开 BAL 106 H WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 500-1500 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 106 L WS-70 | Bonyan Kala Chemie Co. | BAL 106 L WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, pigment wetting, good coverage and dispersing properties. This product has a viscosity of 300-500 stoke at 25°C and is mainly used in metal structural, wood, and metal...展开 BAL 106 L WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, pigment wetting, good coverage and dispersing properties. This product has a viscosity of 300-500 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, spray paints, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 108 WS-70 | Bonyan Kala Chemie Co. | BAL 108 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, solvent acceptation, good coverage and adhesion properties. This product has a viscosity of 500-1000 stoke at 25°C and is mainly used in metal structural, wood...展开 BAL 108 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, solvent acceptation, good coverage and adhesion properties. This product has a viscosity of 500-1000 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 116 WS-70 | Bonyan Kala Chemie Co. | BAL 116 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, hardness and filler accountability properties. This product has a viscosity of 1000-2500 stoke at 25°C and is mainly used in metal structural, wood,...展开 BAL 116 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, hardness and filler accountability properties. This product has a viscosity of 1000-2500 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 118 WS-70 | Bonyan Kala Chemie Co. | BAL 118 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 1000-3000 stoke at 25°C and is mainly used in wood and metal coa...展开 BAL 118 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 1000-3000 stoke at 25°C and is mainly used in wood and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 120 WS-70 | Bonyan Kala Chemie Co. | BAL 120 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and solvent acceptation properties. This product has a viscosity of 300-700 stoke at 25°C and is mainly used in wood and metal coating...展开 BAL 120 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and solvent acceptation properties. This product has a viscosity of 300-700 stoke at 25°C and is mainly used in wood and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAM 202 WS-55 | Bonyan Kala Chemie Co. | BAM 202 WS-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 350-900 stoke ...展开 BAM 202 WS-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 350-900 stoke at 25°C and is mainly used in zinc chromate primers, industrial machinery coatings, metal structural coatings, and spray, auto body repair and industrial air-drying paints. 收起 | |
| BAM 203 X-60 | Bonyan Kala Chemie Co. | BAM 203 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-100 stoke at...展开 BAM 203 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-100 stoke at 25°C and is mainly used in auto body repair paints, metallic paints, industrial machinery coatings, metal structural coatings, and industrial air-drying paints. 收起 | |
| BAM 204 WS-50 | Bonyan Kala Chemie Co. | BAM 204 WS-50 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 150-350 stoke ...展开 BAM 204 WS-50 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 150-350 stoke at 25°C and is mainly used in cabinet and spray paints, industrial air-drying paints, metal structural coatings, industrial machinery coatings, paste for architectural paints, and anti-corrosion primers. 收起 | |
| BAM 208 WSX-55 | Bonyan Kala Chemie Co. | BAM 208 WSX-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-180 stoke ...展开 BAM 208 WSX-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-180 stoke at 25°C and is mainly used in auto body repair paints, industrial machinery coatings, cabinet and spray paints, and industrial air-drying paints. 收起 | |
| BAM 212 X-60 | Bonyan Kala Chemie Co. | BAM 212 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 60-90 stoke at ...展开 BAM 212 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 60-90 stoke at 25°C and is mainly used in auto body repair paints, industrial machinery coatings, metallic paints, industrial air-drying paints, and paint paste. 收起 | |
| BAS 302 X-60 | Bonyan Kala Chemie Co. | BAS 302 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-80 stoke at 25°C and is mainly used in...展开 BAS 302 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-80 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, amino resin based stoving paints, acid curing coatings, and printing inks. 收起 | |
| BAS 305 X-50 | Bonyan Kala Chemie Co. | BAS 305 X-50 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 40-90 stoke at 25°C and is mainly used in...展开 BAS 305 X-50 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 40-90 stoke at 25°C and is mainly used in hammer finish paints, anti-corrosion primers, fast dry paints, and industrial air-drying paints. 收起 | |
| BAS 307 X-60 | Bonyan Kala Chemie Co. | BAS 307 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 250-450 stoke at 25°C and is mainly used ...展开 BAS 307 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 250-450 stoke at 25°C and is mainly used in nitro-cellulose lacquers, amino resin based stoving paints, acid curing coatings, and auto parts stoving paints. 收起 | |
| BAS 310 H X-60 | Bonyan Kala Chemie Co. | BAS 310 H X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 200-400 stoke at 25°C and is mainly use...展开 BAS 310 H X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 200-400 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, acid curing coatings, and anti-corrosion primers. 收起 | |
| BAS 310 L X-60 | Bonyan Kala Chemie Co. | BAS 310 L X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 100-200 stoke at 25°C and is mainly use...展开 BAS 310 L X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 100-200 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, acid curing coatings, and anti-corrosion primers. 收起 | |
| BAS 312 X-60 | Bonyan Kala Chemie Co. | BAS 312 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-120 stoke at 25°C and is mainly used i...展开 BAS 312 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-120 stoke at 25°C and is mainly used in nitro-cellulose paints, alkyd amin lacquers, and anti-corrosion primers. 收起 | |
| BAS 313 X-60 | Bonyan Kala Chemie Co. | BAS 313 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 600-1000 stoke at 25°C and is mainly used...展开 BAS 313 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 600-1000 stoke at 25°C and is mainly used in nitro-cellulose paints, alkyd amin lacquers, and anti-corrosion primers. 收起 | |
| BD-Ca-5 | Bonyan Kala Chemie Co. | BD-Ca-5 is a drier that appears as a clear yellow liquid. This product is an auxiliary drier and has a metal content of 5±0.2. It is often used for air through and surface drying systems. | |
| BD-Co-10 | Bonyan Kala Chemie Co. | BD-Co-10 is a drier that appears as a violet liquid. This product is an active oxidation drier and has a metal content of 10±0.2. It is often used as an accelerator for unsaturated polyester resins and in air drying systems. | |
| BD-Pb-32 | Bonyan Kala Chemie Co. | BD-Pb-32 is a drier that appears as a clear yellow liquid. This product is a through drier and has a metal content of 32±0.5. It is often used for air through and surface drying systems. | |
| BD-Zr-18 | Bonyan Kala Chemie Co. | BD-Zr-18 is a drier that appears as a light yellow liquid. This product is a through drier and has a metal content of 18±0.3. It is often used in air drying systems, metallic paints, metallic varnishes and coatings. | |
| BUP 612 | Bonyan Kala Chemie Co. | BUP 612 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a ...展开 BUP 612 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 550-750CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 615 | Bonyan Kala Chemie Co. | BUP 615 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, and good physical and mechanical properties after curing. This product has a viscosity of 380-480CP at 25°C and is commonly used in ...展开 BUP 615 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, and good physical and mechanical properties after curing. This product has a viscosity of 380-480CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 620 | Bonyan Kala Chemie Co. | BUP 620 is an unsaturated polyester resin that is used for its low color, excellent adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a visc...展开 BUP 620 is an unsaturated polyester resin that is used for its low color, excellent adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 400-650CP at 25°C and is commonly used in general purpose applications and goods that need high transparency. 收起 | |
| BUP 621 | Bonyan Kala Chemie Co. | BUP 621 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity...展开 BUP 621 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 380-480CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 623 | Bonyan Kala Chemie Co. | BUP 623 is an unsaturated polyester resin that is used for its good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited shrinkage, and filler appropriate accountability properties. This product has a v...展开 BUP 623 is an unsaturated polyester resin that is used for its good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited shrinkage, and filler appropriate accountability properties. This product has a viscosity of 500-700CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 624 | Bonyan Kala Chemie Co. | BUP 624 is an unsaturated polyester resin that is used for its low color, medium viscosity, good physical and mechanical properties after curing, resistant to UV, and filler appropriate accountability properties. This product has a viscosity of 450-700CP ...展开 BUP 624 is an unsaturated polyester resin that is used for its low color, medium viscosity, good physical and mechanical properties after curing, resistant to UV, and filler appropriate accountability properties. This product has a viscosity of 450-700CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 625 | Bonyan Kala Chemie Co. | BUP 625 is an unsaturated polyester resin that is used for its medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 350-500CP at 25°C and is commonly use...展开 BUP 625 is an unsaturated polyester resin that is used for its medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 350-500CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 626 | Bonyan Kala Chemie Co. | BUP 626 is an unsaturated polyester resin that is used for its low color, limited water absorption, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of ...展开 BUP 626 is an unsaturated polyester resin that is used for its low color, limited water absorption, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 450-650CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 629 | Bonyan Kala Chemie Co. | BUP 629 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosit...展开 BUP 629 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 700-1000CP at 25°C and is commonly used in general purpose applications and goods that need high transparency. 收起 | |
| BUP 630 | Bonyan Kala Chemie Co. | BUP 630 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, resistant to hydrolysis, and good flexibility and go...展开 BUP 630 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, resistant to hydrolysis, and good flexibility and good resistant to impact. This product has a viscosity of 450-700CP at 25°C and is commonly used in general purpose applications and gel coats. 收起 | |
| BUP 631 | Bonyan Kala Chemie Co. | BUP 631 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product ha...展开 BUP 631 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a viscosity of 700-1000CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 640 | Bonyan Kala Chemie Co. | BUP 640 is an unsaturated polyester resin that is used for its low gel time, low color, high viscosity, good physical and mechanical properties after curing, and good flexibility and good transparency. This product has a viscosity of 1200-1700CP at 25°C a...展开 BUP 640 is an unsaturated polyester resin that is used for its low gel time, low color, high viscosity, good physical and mechanical properties after curing, and good flexibility and good transparency. This product has a viscosity of 1200-1700CP at 25°C and is commonly used in general purpose applications and goods that need high transparency. 收起 | |
| BUP 643 | Bonyan Kala Chemie Co. | BUP 643 is an unsaturated polyester resin that is used for its low gel time, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistance to impact. This product has a viscosity of 900-1500CP at 25°C and...展开 BUP 643 is an unsaturated polyester resin that is used for its low gel time, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistance to impact. This product has a viscosity of 900-1500CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 660 | Bonyan Kala Chemie Co. | BUP 660 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a visc...展开 BUP 660 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a viscosity of 600-900CP at 25°C and is commonly used in general purpose applications and gel coats. 收起 | |
| BUP 665 | Bonyan Kala Chemie Co. | BUP 665 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a visc...展开 BUP 665 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a viscosity of 800-1200CP at 25°C and is commonly used in general purpose applications and gel coats. 收起 | |
| BUP 690 | Bonyan Kala Chemie Co. | BUP 690 is an unsaturated polyester resin that is used for its moderate gel time, low viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 300-450CP at 25°C and ...展开 BUP 690 is an unsaturated polyester resin that is used for its moderate gel time, low viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 300-450CP at 25°C and is commonly used in general purpose applications. 收起 | |
| Toda Color 100CR | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 100CR, in the form of a red powder, is an iron oxide pigment. This product has a pH value of 5-7, and can be used in coatings and inks. | |
| Toda Color 100EDS | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 100EDS, in the form of a micronized powder, is a red iron oxide pigment. This product has a pH value of 5-7 and can be used in powder coatings and inks. | |
| Toda Color 120CR | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 120CR, in the form of a red powder, is an iron oxide pigment. This product has a pH value of 5-7 and can be used in coatings and inks. | |
| Toda Color 120EDS | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 120EDS, in the form of a micronized powder, is a red iron oxide pigment. This product has a pH value of 5-7 and can be used in coatings and inks. | |
| Toda Color 130CR | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 130CR, in the form of a red powder, is an iron oxide pigment. This product has a pH value of 5-7 and can be used in coatings and inks. | |
| Toda Color 130EDS | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 130EDS, in the form of a micronized powder, is a red iron oxide pigment. This product has a pH value of 5-7, and can be used in coatings and inks. | |
| Toda Color 134CR | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 134CR, in the form of a red powder, is an iron oxide pigment. This product has a pH value of 5-7, and can be used in coatings and inks. | |
| Toda Color 140CR | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 140 CR, in the form of a red powder, is an iron oxide pigment. This product has a pH value of 5-7, and can be used in coatings and inks. | |
| Toda Color 140EDS | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 140EDS, in the form of a micronized powder, is a red iron oxide pigment. This product has a pH value of 5-7 and can be used in powder coatings and inks. | |
| Toda Color 160CR | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 160CR, in the form of a red powder, is an iron oxide pigment. This product has a pH value of 5-7, and can be used in coatings and inks. | |
| Toda Color 160EDS | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 160EDS, in the form of a micronized powder, is a red iron oxide pigment. This product has a pH value of 5-7 and can be used in powder coatings and inks. | |
| Toda Color 180CR | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 180CR, in the form of a red powder, is an iron oxide pigment. This product has a pH value of 5-7, and can be used in coatings and inks. | |
| Toda Color 180EDS | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 180EDS, in the form of a micronized powder, is a red iron oxide pigment. This product has a pH value of 5-7 and can be used in powder coatings and inks. | |
| Toda Color CB-502 | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CB-502, in the form of a black powder, is an iron oxide pigment. This product has a pH value of 5-7.5, and can be used in coatings and inks. | |
| Toda Color CB-740(A) | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CB-740(A), in the form of a micronized powder, is a black iron oxide pigment. This product has a pH value of 5-7.5 and can be used in powder coatings and inks. | |
| Toda Color CHS-120 | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CHS-120, in the form of a red powder, is an iron oxide pigment. This product has a pH value of 3-5 and an oil absorption of 20-30 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color CHS-120M | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CHS-120M, in the form of a micronized red powder, is an iron oxide pigment. This product has a pH value of 3-5 and an oil absorption of 20-30 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color CHS-120MP | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CHS-120MP, in the form of a micronized red powder, is an iron oxide pigment. This product has a pH value of 5-7 and an oil absorption of 20-30 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color CHS-125 | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CHS-125, in the form of a red powder, is an iron oxide pigment. This product has a pH value of 3-5 and an oil absorption of 20-30 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color CHS-125M | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CHS-125M, in the form of a micronized red powder, is an iron oxide pigment. This product has a pH value of 3-5 and an oil absorption of 20-30 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color CHS-125MP | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CHS-125MP, in the form of a micronized red powder, is an iron oxide pigment. This product has a pH value of 5-7 and an oil absorption of 20-30 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color CHS-180 | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CHS-180, in the form of a red powder, is an iron oxide pigment. This product has a pH value of 3-5 and an oil absorption of 20-30 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color CHS-180M | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CHS-180M, in the form of a micronized red powder, is an iron oxide pigment. This product has a pH value of 3-5 and an oil absorption of 20-30 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color CHS-180MP | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CHS-180MP, in the form of a micronized red powder, is an iron oxide pigment. This product has a pH value of 5-7 and an oil absorption of 20-30 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color TAN TOP-100 | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color TAN TOP-100, in the form of a yellow powder, is an iron oxide pigment. This product has a pH value of 5-7.5 and an oil absorption of 40-50 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color TSY-1 | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color TSY-1, in the form of a micronized powder, is a yellow iron oxide pigment. This product has a pH value of 5-7 and an oil absorption of 25-35 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color TSY-1H | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color TSY-1H, in the form of a micronized powder, is a yellow iron oxide pigment. This product has a pH value of 5-7 and an oil absorption of 25-35 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color TSY-2 | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color TSY-2, in the form of a micronized powder, is a yellow iron oxide pigment. This product has a pH value of 5-7 and an oil absorption of 25-35 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color TSY-2H | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color TSY-2H, in the form of a micronized powder, is a yellow iron oxide pigment. This product has a pH value of 5-7 and an oil absorption of 25-35 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color Y-50 | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color Y-50, in the form of a yellow powder, is an iron oxide pigment. This product has a pH value of 5-7 and an oil absorption of 30-40 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Cenomic™ 1 | Bühler AG | Cenomic™ 1 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler S...展开 Cenomic™ 1 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler SCS™ (Superior Centrifugal Separation), consisting of a highly effective deflector with integrated EcoMizer™-function. Protected from wear a discharge screen is located within the deflector. Cenomic™ is highly recommended for products like protective coatings, paints, gravure inks and many more. 收起 |  |
| Cenomic™ 15 | Bühler AG | Cenomic™ 15 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler ...展开 Cenomic™ 15 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler SCS™ (Superior Centrifugal Separation), consisting of a highly effective deflector with integrated EcoMizer™-function. Protected from wear a discharge screen is located within the deflector. Cenomic™ is highly recommended for products like protective coatings, paints, gravure inks and many more. 收起 |  |
| Cenomic™ 3 | Bühler AG | Cenomic™ 3 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler S...展开 Cenomic™ 3 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler SCS™ (Superior Centrifugal Separation), consisting of a highly effective deflector with integrated EcoMizer™-function. Protected from wear a discharge screen is located within the deflector. Cenomic™ is highly recommended for products like protective coatings, paints, gravure inks and many more. 收起 |  |
| Cenomic™ 6 | Bühler AG | Cenomic™ 6 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler S...展开 Cenomic™ 6 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler SCS™ (Superior Centrifugal Separation), consisting of a highly effective deflector with integrated EcoMizer™-function. Protected from wear a discharge screen is located within the deflector. Cenomic™ is highly recommended for products like protective coatings, paints, gravure inks and many more. 收起 |  |
| MacroMedia™ | Bühler AG | MacroMedia™的高性能泵和小体积研磨个体的组合是市场上独一无二的。由于在预研磨阶段有更好的工艺控制，原材料质量的波动得以平衡，并实现预研磨中间体产品的均匀性能。这款产品最优化了精细研磨的结果，并提高了最终产品的质量。同时，与其它预研磨解决方案相比，该系统由于有更好的材料回收率和优化的能量效率而降低了成本。 |  |
| MicroMedia™ L | Bühler AG | MicroMedia™ L is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMe...展开 MicroMedia™ L is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 收起 |  |
| MicroMedia™ L-C | Bühler AG | MicroMedia™ L-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The Micro...展开 MicroMedia™ L-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 收起 |  |
| MicroMedia™ P1-C | Bühler AG | MicroMedia™ P1-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The Micr...展开 MicroMedia™ P1-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 收起 |  |
| MicroMedia™ P2-C | Bühler AG | MicroMedia™ P2-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The Micr...展开 MicroMedia™ P2-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 收起 |  |
| MicroMedia™ X1 | Bühler AG | MicroMedia™ X1 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroM...展开 MicroMedia™ X1 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 收起 |  |
| MicroMedia™ X2 | Bühler AG | MicroMedia™ X2 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroM...展开 MicroMedia™ X2 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 收起 |  |
| MicroMedia™ X3 | Bühler AG | MicroMedia™ X3 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroM...展开 MicroMedia™ X3 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 收起 |  |
| MicroMedia™ X4 | Bühler AG | MicroMedia™ X4 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroM...展开 MicroMedia™ X4 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 收起 |  |
| Performix™ HSD-15 | Bühler AG | Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Availabl...展开 Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Available in the regions Latin America, Asia, Middle East and Africa 收起 |  |
| Performix™ HSD-20 | Bühler AG | Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Availabl...展开 Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Available in the regions Latin America, Asia, Middle East and Africa 收起 |  |
| Performix™ HSD-30 | Bühler AG | Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Availabl...展开 Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Available in the regions Latin America, Asia, Middle East and Africa 收起 |  |
| Performix™ HSD-40 | Bühler AG | Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Availabl...展开 Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Available in the regions Latin America, Asia, Middle East and Africa 收起 |  |
| PML 2 | Bühler AG | The PML 2 is the optimal solution for the development of innovative wet grinding processes. The core piece is a robust and powerful drive and control unit which can be combined with different process units tailored to specific applications. If for true gr...展开 The PML 2 is the optimal solution for the development of innovative wet grinding processes. The core piece is a robust and powerful drive and control unit which can be combined with different process units tailored to specific applications. If for true grinding applications, metal-free dispersion of electronic materials or nano applications – the PML 2 is the right solution. 收起 |  |
| PML easy | Bühler AG | PML easy is a universal bead mill platform for lab-scaled process development has a modular design and offers unmatched flexibility. Its core piece is a resistant and powerful drive which can be combined with two different process units tailored to specif...展开 PML easy is a universal bead mill platform for lab-scaled process development has a modular design and offers unmatched flexibility. Its core piece is a resistant and powerful drive which can be combined with two different process units tailored to specific applications. *Available in the regions Latin America, Asia, Middle East and Africa 收起 |  |
| Trias™ 300 | Bühler AG | Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international st...展开 Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international standards. The camberless VIVA™ roll technology guarantees even product quality independent of the roll pressure. 收起 |  |
| Trias™ 600 | Bühler AG | Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international st...展开 Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international standards. The camberless VIVA™ roll technology guarantees even product quality independent of the roll pressure. 收起 |  |
| Trias™ 800 | Bühler AG | Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international st...展开 Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international standards. The camberless VIVA™ roll technology guarantees even product quality independent of the roll pressure. 收起 |  |
| Trinomic™ 1300 | Bühler AG | Trinomic™ is a fully hydraulic three-roll mill that can be used for many different applications. It is especially designed for products from high to very high viscosity, e.g. materials for electronics, all kinds of printing inks, industrial and decorative...展开 Trinomic™ is a fully hydraulic three-roll mill that can be used for many different applications. It is especially designed for products from high to very high viscosity, e.g. materials for electronics, all kinds of printing inks, industrial and decorative paints, toners, coatings and lubricants, but also for materials for the cosmetics industries. The three-roll mill is designed for meeting high quality demands and at the same time enables convenient, easy operation and quick cleaning 收起 |  |
| Trinomic™ 600 | Bühler AG | Trinomic™ is a fully hydraulic three-roll mill that can be used for many different applications. It is especially designed for products from high to very high viscosity, e.g. materials for electronics, all kinds of printing inks, industrial and decorative...展开 Trinomic™ is a fully hydraulic three-roll mill that can be used for many different applications. It is especially designed for products from high to very high viscosity, e.g. materials for electronics, all kinds of printing inks, industrial and decorative paints, toners, coatings and lubricants, but also for materials for the cosmetics industries. The three-roll mill is designed for meeting high quality demands and at the same time enables convenient, easy operation and quick cleaning 收起 |  |
