| Acrylic Crosslinker GMA-300 | Worlée-Chemie G.m.b.H. | 丙烯酸交联剂GMA-300是缩水甘油基官能团丙烯酸三元共聚物，可与羧基和胺官能团化合物反应形成持久的涂膜。丙烯酸交联剂GMA-300可与其它树脂和固化剂一起使用，制备UV固化、高固体份、溶剂型和粉末涂料体系 | |
| BAL 101 H WS-70 | Bonyan Kala Chemie Co. | BAL 101 H WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 800-1500 stoke at 25°C and is used in industrial varnishes, wood and metal coatings, and g...展开 BAL 101 H WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 800-1500 stoke at 25°C and is used in industrial varnishes, wood and metal coatings, and gloss and semi gloss architectural paints. 收起 | |
| BAL 101 L WS-70 | Bonyan Kala Chemie Co. | BAL 101 L WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 350-650 stoke at 25°C and is used in industrial varnishes, metal structural coatings, and ...展开 BAL 101 L WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 350-650 stoke at 25°C and is used in industrial varnishes, metal structural coatings, and gloss and semi gloss architectural paints. 收起 | |
| BAL 102 WS-70 | Bonyan Kala Chemie Co. | BAL 102 WS-70 is a long oil alkyd resin that is used for its coverage, drying, gloss retention, pigment wetting, and dispersing properties. This product has a viscosity of 250-500 stoke at 25°C and is mainly used as a paste in architectural paints, and in...展开 BAL 102 WS-70 is a long oil alkyd resin that is used for its coverage, drying, gloss retention, pigment wetting, and dispersing properties. This product has a viscosity of 250-500 stoke at 25°C and is mainly used as a paste in architectural paints, and in architectural and industrial varnishes. 收起 | |
| BAL 103 WS-70 | Bonyan Kala Chemie Co. | BAL 103 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, pigment wetting, dispersing, and coverage properties. This product has a viscosity of 330-550 stoke at 25°C and is used in industrial varnishes, wood...展开 BAL 103 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, pigment wetting, dispersing, and coverage properties. This product has a viscosity of 330-550 stoke at 25°C and is used in industrial varnishes, wood and metal coatings, and gloss and semi gloss architectural paints. 收起 | |
| BAL 104 WS-70 | Bonyan Kala Chemie Co. | BAL 104 WS-70 is a long oil alkyd resin that is used for its solvent acceptation and filler accountability properties. This product has a viscosity of 1000-3500 stoke at 25°C and is mainly used in metal structural coatings, industrial, wood, metal, anti-c...展开 BAL 104 WS-70 is a long oil alkyd resin that is used for its solvent acceptation and filler accountability properties. This product has a viscosity of 1000-3500 stoke at 25°C and is mainly used in metal structural coatings, industrial, wood, metal, anti-corrosion and anti-rust primers. 收起 | |
| BAL 106 H WS-70 | Bonyan Kala Chemie Co. | BAL 106 H WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 500-1500 stoke at 25°C and is mainly used in metal structural,...展开 BAL 106 H WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 500-1500 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 106 L WS-70 | Bonyan Kala Chemie Co. | BAL 106 L WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, pigment wetting, good coverage and dispersing properties. This product has a viscosity of 300-500 stoke at 25°C and is mainly used in metal structural, wood, and metal...展开 BAL 106 L WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, pigment wetting, good coverage and dispersing properties. This product has a viscosity of 300-500 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, spray paints, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 108 WS-70 | Bonyan Kala Chemie Co. | BAL 108 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, solvent acceptation, good coverage and adhesion properties. This product has a viscosity of 500-1000 stoke at 25°C and is mainly used in metal structural, wood...展开 BAL 108 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, solvent acceptation, good coverage and adhesion properties. This product has a viscosity of 500-1000 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 116 WS-70 | Bonyan Kala Chemie Co. | BAL 116 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, hardness and filler accountability properties. This product has a viscosity of 1000-2500 stoke at 25°C and is mainly used in metal structural, wood,...展开 BAL 116 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, hardness and filler accountability properties. This product has a viscosity of 1000-2500 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 118 WS-70 | Bonyan Kala Chemie Co. | BAL 118 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 1000-3000 stoke at 25°C and is mainly used in wood and metal coa...展开 BAL 118 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 1000-3000 stoke at 25°C and is mainly used in wood and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 120 WS-70 | Bonyan Kala Chemie Co. | BAL 120 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and solvent acceptation properties. This product has a viscosity of 300-700 stoke at 25°C and is mainly used in wood and metal coating...展开 BAL 120 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and solvent acceptation properties. This product has a viscosity of 300-700 stoke at 25°C and is mainly used in wood and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAM 202 WS-55 | Bonyan Kala Chemie Co. | BAM 202 WS-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 350-900 stoke ...展开 BAM 202 WS-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 350-900 stoke at 25°C and is mainly used in zinc chromate primers, industrial machinery coatings, metal structural coatings, and spray, auto body repair and industrial air-drying paints. 收起 | |
| BAM 203 X-60 | Bonyan Kala Chemie Co. | BAM 203 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-100 stoke at...展开 BAM 203 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-100 stoke at 25°C and is mainly used in auto body repair paints, metallic paints, industrial machinery coatings, metal structural coatings, and industrial air-drying paints. 收起 | |
| BAM 204 WS-50 | Bonyan Kala Chemie Co. | BAM 204 WS-50 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 150-350 stoke ...展开 BAM 204 WS-50 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 150-350 stoke at 25°C and is mainly used in cabinet and spray paints, industrial air-drying paints, metal structural coatings, industrial machinery coatings, paste for architectural paints, and anti-corrosion primers. 收起 | |
| BAM 208 WSX-55 | Bonyan Kala Chemie Co. | BAM 208 WSX-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-180 stoke ...展开 BAM 208 WSX-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-180 stoke at 25°C and is mainly used in auto body repair paints, industrial machinery coatings, cabinet and spray paints, and industrial air-drying paints. 收起 | |
| BAM 212 X-60 | Bonyan Kala Chemie Co. | BAM 212 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 60-90 stoke at ...展开 BAM 212 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 60-90 stoke at 25°C and is mainly used in auto body repair paints, industrial machinery coatings, metallic paints, industrial air-drying paints, and paint paste. 收起 | |
| BAS 302 X-60 | Bonyan Kala Chemie Co. | BAS 302 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-80 stoke at 25°C and is mainly used in...展开 BAS 302 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-80 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, amino resin based stoving paints, acid curing coatings, and printing inks. 收起 | |
| BAS 305 X-50 | Bonyan Kala Chemie Co. | BAS 305 X-50 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 40-90 stoke at 25°C and is mainly used in...展开 BAS 305 X-50 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 40-90 stoke at 25°C and is mainly used in hammer finish paints, anti-corrosion primers, fast dry paints, and industrial air-drying paints. 收起 | |
| BAS 307 X-60 | Bonyan Kala Chemie Co. | BAS 307 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 250-450 stoke at 25°C and is mainly used ...展开 BAS 307 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 250-450 stoke at 25°C and is mainly used in nitro-cellulose lacquers, amino resin based stoving paints, acid curing coatings, and auto parts stoving paints. 收起 | |
| BAS 310 H X-60 | Bonyan Kala Chemie Co. | BAS 310 H X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 200-400 stoke at 25°C and is mainly use...展开 BAS 310 H X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 200-400 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, acid curing coatings, and anti-corrosion primers. 收起 | |
| BAS 310 L X-60 | Bonyan Kala Chemie Co. | BAS 310 L X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 100-200 stoke at 25°C and is mainly use...展开 BAS 310 L X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 100-200 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, acid curing coatings, and anti-corrosion primers. 收起 | |
| BAS 312 X-60 | Bonyan Kala Chemie Co. | BAS 312 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-120 stoke at 25°C and is mainly used i...展开 BAS 312 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-120 stoke at 25°C and is mainly used in nitro-cellulose paints, alkyd amin lacquers, and anti-corrosion primers. 收起 | |
| BAS 313 X-60 | Bonyan Kala Chemie Co. | BAS 313 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 600-1000 stoke at 25°C and is mainly used...展开 BAS 313 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 600-1000 stoke at 25°C and is mainly used in nitro-cellulose paints, alkyd amin lacquers, and anti-corrosion primers. 收起 | |
| BD-Ca-5 | Bonyan Kala Chemie Co. | BD-Ca-5 is a drier that appears as a clear yellow liquid. This product is an auxiliary drier and has a metal content of 5±0.2. It is often used for air through and surface drying systems. | |
| BD-Co-10 | Bonyan Kala Chemie Co. | BD-Co-10 is a drier that appears as a violet liquid. This product is an active oxidation drier and has a metal content of 10±0.2. It is often used as an accelerator for unsaturated polyester resins and in air drying systems. | |
| BD-Pb-32 | Bonyan Kala Chemie Co. | BD-Pb-32 is a drier that appears as a clear yellow liquid. This product is a through drier and has a metal content of 32±0.5. It is often used for air through and surface drying systems. | |
| BD-Zr-18 | Bonyan Kala Chemie Co. | BD-Zr-18 is a drier that appears as a light yellow liquid. This product is a through drier and has a metal content of 18±0.3. It is often used in air drying systems, metallic paints, metallic varnishes and coatings. | |
| Bluepur 2937 | S.A.P.I.C.I. SpA | Bluepur 2937 is a waterborne polyurethane dispersion. This product has a self cross-linking behaviour that confers high hardness in the end system. It can be used to formulate transparent or pigmented coatings, especially in the formulation of 1K or 2K ...展开 Bluepur 2937 is a waterborne polyurethane dispersion. This product has a self cross-linking behaviour that confers high hardness in the end system. It can be used to formulate transparent or pigmented coatings, especially in the formulation of 1K or 2K waterborne systems. 收起 | |
| Bluepur 3037 | S.A.P.I.C.I. SpA | Bluepur 3037 is a waterborne polyurethane dispersion. This product has a self cross-linking behaviour that confers high hardness in the end system. It can be used in the formulation of metal or plastic coatings, especially for 1K or 2K waterborne system...展开 Bluepur 3037 is a waterborne polyurethane dispersion. This product has a self cross-linking behaviour that confers high hardness in the end system. It can be used in the formulation of metal or plastic coatings, especially for 1K or 2K waterborne systems. 收起 | |
| Bluepur 3080 | S.A.P.I.C.I. SpA | Bluepur 3080 is a waterborne polyurethane dispersion. This product can be used as a coalescing agent with polyurethane dispersions or acrylic emulsions. It can be used in the formulation of metal and plastic coatings, especially for the formulation of 1...展开 Bluepur 3080 is a waterborne polyurethane dispersion. This product can be used as a coalescing agent with polyurethane dispersions or acrylic emulsions. It can be used in the formulation of metal and plastic coatings, especially for the formulation of 1K or 2K waterborne systems. 收起 | |
| BUP 612 | Bonyan Kala Chemie Co. | BUP 612 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a ...展开 BUP 612 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 550-750CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 615 | Bonyan Kala Chemie Co. | BUP 615 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, and good physical and mechanical properties after curing. This product has a viscosity of 380-480CP at 25°C and is commonly used in ...展开 BUP 615 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, and good physical and mechanical properties after curing. This product has a viscosity of 380-480CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 620 | Bonyan Kala Chemie Co. | BUP 620 is an unsaturated polyester resin that is used for its low color, excellent adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a visc...展开 BUP 620 is an unsaturated polyester resin that is used for its low color, excellent adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 400-650CP at 25°C and is commonly used in general purpose applications and goods that need high transparency. 收起 | |
| BUP 621 | Bonyan Kala Chemie Co. | BUP 621 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity...展开 BUP 621 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 380-480CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 623 | Bonyan Kala Chemie Co. | BUP 623 is an unsaturated polyester resin that is used for its good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited shrinkage, and filler appropriate accountability properties. This product has a v...展开 BUP 623 is an unsaturated polyester resin that is used for its good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited shrinkage, and filler appropriate accountability properties. This product has a viscosity of 500-700CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 624 | Bonyan Kala Chemie Co. | BUP 624 is an unsaturated polyester resin that is used for its low color, medium viscosity, good physical and mechanical properties after curing, resistant to UV, and filler appropriate accountability properties. This product has a viscosity of 450-700CP ...展开 BUP 624 is an unsaturated polyester resin that is used for its low color, medium viscosity, good physical and mechanical properties after curing, resistant to UV, and filler appropriate accountability properties. This product has a viscosity of 450-700CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 625 | Bonyan Kala Chemie Co. | BUP 625 is an unsaturated polyester resin that is used for its medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 350-500CP at 25°C and is commonly use...展开 BUP 625 is an unsaturated polyester resin that is used for its medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 350-500CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 626 | Bonyan Kala Chemie Co. | BUP 626 is an unsaturated polyester resin that is used for its low color, limited water absorption, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of ...展开 BUP 626 is an unsaturated polyester resin that is used for its low color, limited water absorption, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 450-650CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 629 | Bonyan Kala Chemie Co. | BUP 629 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosit...展开 BUP 629 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 700-1000CP at 25°C and is commonly used in general purpose applications and goods that need high transparency. 收起 | |
| BUP 630 | Bonyan Kala Chemie Co. | BUP 630 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, resistant to hydrolysis, and good flexibility and go...展开 BUP 630 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, resistant to hydrolysis, and good flexibility and good resistant to impact. This product has a viscosity of 450-700CP at 25°C and is commonly used in general purpose applications and gel coats. 收起 | |
| BUP 631 | Bonyan Kala Chemie Co. | BUP 631 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product ha...展开 BUP 631 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a viscosity of 700-1000CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 640 | Bonyan Kala Chemie Co. | BUP 640 is an unsaturated polyester resin that is used for its low gel time, low color, high viscosity, good physical and mechanical properties after curing, and good flexibility and good transparency. This product has a viscosity of 1200-1700CP at 25°C a...展开 BUP 640 is an unsaturated polyester resin that is used for its low gel time, low color, high viscosity, good physical and mechanical properties after curing, and good flexibility and good transparency. This product has a viscosity of 1200-1700CP at 25°C and is commonly used in general purpose applications and goods that need high transparency. 收起 | |
| BUP 643 | Bonyan Kala Chemie Co. | BUP 643 is an unsaturated polyester resin that is used for its low gel time, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistance to impact. This product has a viscosity of 900-1500CP at 25°C and...展开 BUP 643 is an unsaturated polyester resin that is used for its low gel time, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistance to impact. This product has a viscosity of 900-1500CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 660 | Bonyan Kala Chemie Co. | BUP 660 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a visc...展开 BUP 660 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a viscosity of 600-900CP at 25°C and is commonly used in general purpose applications and gel coats. 收起 | |
| BUP 665 | Bonyan Kala Chemie Co. | BUP 665 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a visc...展开 BUP 665 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a viscosity of 800-1200CP at 25°C and is commonly used in general purpose applications and gel coats. 收起 | |
| BUP 690 | Bonyan Kala Chemie Co. | BUP 690 is an unsaturated polyester resin that is used for its moderate gel time, low viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 300-450CP at 25°C and ...展开 BUP 690 is an unsaturated polyester resin that is used for its moderate gel time, low viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 300-450CP at 25°C and is commonly used in general purpose applications. 收起 | |
| Epomatt G-151 | Worlée-Chemie G.m.b.H. | 特殊类型的光泽调节剂，适用于环氧粉末涂料 | |
| Epoxy Hardener G-91 | Worlée-Chemie G.m.b.H. | 新型环氧固化剂，用于制备环氧粉末涂料，具有出色的机械性能和良好的颜色稳定性 | |
| Epoxy Hardener G-92 | Worlée-Chemie G.m.b.H. | 催化酚固化剂，结合环氧和环氧酚醛树脂使用 | |
| ESCAT 50 | Worlée-Chemie G.m.b.H. | 取代咪唑催化剂母料，50%活性物负载于蓖麻蜡上。催化剂母料负载于蓖麻蜡上可改进挤出时的相容性，可帮助粉末涂料的均一分散 | |
| Hydrorene 10 | S.A.P.I.C.I. SpA | Hydrorene 10 is a water-dispersible isocyanate. This product can be mixed with acrylic emulsions and polyurethane dispersion waterborne systems. It can be used as a hardener for 2K waterborne coatings with good chemical and abrasion resistance. | |
| Hydrorene 33 | S.A.P.I.C.I. SpA | Hydrorene 33 is a water-dispersible isocyanate. This product has good chemical and abrasion resistance. It can be used in acrylic and polyurethane waterborne systems, in order to create high gloss topcoats or 2K waterborne varnishes. | |
| Hydrorene AW 1 | S.A.P.I.C.I. SpA | Hydrorene AW 1 is a water-dispersible isocyanate. This product can be used in 2k waterborne varnishes with good chemical or abrasion resistance. It can also be used in adhesives. | |
| Hydrorexin PU 1083 | S.A.P.I.C.I. SpA | Hydrorexin PU 1083 is a waterborne polyurethane dispersion. This product has good chemical resistance, abrasion resistance, and sandability. Its solvent resistance makes it suitable for use in mixed (water/solvent) coating cycle applications. | |
| Hydrorexin PU 5855 | S.A.P.I.C.I. SpA | Hydrorexin PU 5855 is a waterborne polyurethane dispersion based on polycarbonate. This product has good chemical and abrasion resistance with good pigment wetting. It can be used in 1K or 2K topcoats. It is particularly recommended for plastic and RIM...展开 Hydrorexin PU 5855 is a waterborne polyurethane dispersion based on polycarbonate. This product has good chemical and abrasion resistance with good pigment wetting. It can be used in 1K or 2K topcoats. It is particularly recommended for plastic and RIM applications. 收起 | |
| Hydrorexin PU 6319 | S.A.P.I.C.I. SpA | Hydrorexin PU 6319 is a waterborne polyurethane dispersion. This product has good hardness, flexibility, chemical resistance, and abrasion resistance. It can be used in 2K coatings for building and outdoor applications. It can also be used in leather f...展开 Hydrorexin PU 6319 is a waterborne polyurethane dispersion. This product has good hardness, flexibility, chemical resistance, and abrasion resistance. It can be used in 2K coatings for building and outdoor applications. It can also be used in leather finishing. 收起 | |
| Isocryl EP-570 | Worlée-Chemie G.m.b.H. | Isocryl EP-570是一种缩水甘油基丙烯酸交联剂，适用于户外耐候性粉末涂料的光泽调节。类似W´Cryl CP 550，Isocryl EP-570结合30-35酸值聚酯可制备“一步法”低光涂料。Isocryl EP-570相比其它消光丙烯酸的一个主要优势是改良了抗摩擦发亮性能。此外，Isocryl EP-570已充分地改进了与聚酯/TGIC和混合型粉末涂料的相容性 | |
| Polurene 2391 | S.A.P.I.C.I. SpA | Polurene 2391 is an aliphatic-aromatic isocyanurate. This product has good yellowing resistance, elasticity, hardness, filling and gloss. It can be used in clear or pigmented high-quality polyurethane high gloss topcoats. This product contains less tha...展开 Polurene 2391 is an aliphatic-aromatic isocyanurate. This product has good yellowing resistance, elasticity, hardness, filling and gloss. It can be used in clear or pigmented high-quality polyurethane high gloss topcoats. This product contains less than .5% TDI or IPDI isocyanates. 收起 | |
| Polurene 3031 | S.A.P.I.C.I. SpA | Polurene 3031 is an aromatic isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers and matt topcoats. This product contains less than .5% TDI isocyanates. | |
| Polurene 60 T | S.A.P.I.C.I. SpA | Polurene 60 T is an aromatic isocyanurate with low free TDI content. This product is compatible with aromatic solvents and nitrocellulose. It can be used in pigmented or clear sealers and matt or gloss topcoats. This product contains less than 1.0% TDI ...展开 Polurene 60 T is an aromatic isocyanurate with low free TDI content. This product is compatible with aromatic solvents and nitrocellulose. It can be used in pigmented or clear sealers and matt or gloss topcoats. This product contains less than 1.0% TDI isocyanates. 收起 | |
| Polurene 7581 | S.A.P.I.C.I. SpA | Polurene 7581 is an aromatic isocyanurate with low free TDI content. This product is compatible with saturated polyesters, vinyl resins, and nitrocellulose. It is designed for polyurethane sealers and matt topcoats, particularly those applications in ad...展开 Polurene 7581 is an aromatic isocyanurate with low free TDI content. This product is compatible with saturated polyesters, vinyl resins, and nitrocellulose. It is designed for polyurethane sealers and matt topcoats, particularly those applications in adverse weather conditions of high temperature and humidity. This product contains less than .5% TDI isocyanates. 收起 | |
| Polurene AC510 | S.A.P.I.C.I. SpA | Polurene AC510 is an aromatic isocyanurate. This product is highly compatible with nitrocellulose, aromatic solvents, saturated polyesters, hydroxide acrylic and vinyl resins. It can be used in sealers and topcoats for wood, metal and paper. This produ...展开 Polurene AC510 is an aromatic isocyanurate. This product is highly compatible with nitrocellulose, aromatic solvents, saturated polyesters, hydroxide acrylic and vinyl resins. It can be used in sealers and topcoats for wood, metal and paper. This product contains less than .7% TDI isocyanates. 收起 | |
| Polurene AD | S.A.P.I.C.I. SpA | Polurene AD is a polyurethane adduct with low free TDI content. This product is highly compatible with nitrocellulose, CAB, saturated polyesters, OH acrylic polyols, and vinyl resins. It can be used in 2K varnishes and enamels. Polurene AD contains less...展开 Polurene AD is a polyurethane adduct with low free TDI content. This product is highly compatible with nitrocellulose, CAB, saturated polyesters, OH acrylic polyols, and vinyl resins. It can be used in 2K varnishes and enamels. Polurene AD contains less than .5% TDI isocyanates. 收起 | |
| Polurene AD 67 | S.A.P.I.C.I. SpA | Polurene AD 67 is a polyurethane adduct with low free TDI content. This product is highly compatible with nitrocellulose, CAB, saturated polyesters, OH acrylic polyols, and vinyl resins. It can be used in 2K varnishes and enamels. This product contains...展开 Polurene AD 67 is a polyurethane adduct with low free TDI content. This product is highly compatible with nitrocellulose, CAB, saturated polyesters, OH acrylic polyols, and vinyl resins. It can be used in 2K varnishes and enamels. This product contains less than .5% TDI isocyanates. 收起 | |
| Polurene AD 67 AB LV | S.A.P.I.C.I. SpA | Polurene AD 67 AB LV is a polyurethane adduct with low free TDI content. THis product is highly compatible with nitrocellulose, CAB, saturated polyesters, OH acrylic polyols, and vinyl resins. It can be used in 2K varnishes and enamels. This product co...展开 Polurene AD 67 AB LV is a polyurethane adduct with low free TDI content. THis product is highly compatible with nitrocellulose, CAB, saturated polyesters, OH acrylic polyols, and vinyl resins. It can be used in 2K varnishes and enamels. This product contains less than .5% TDI isocyanates. 收起 | |
| Polurene AD 72 | S.A.P.I.C.I. SpA | Polurene AD 72 is a polyurethane adduct with low free TDI content. This product is highly compatible with nitrocellulose, CAB, saturated polyesters, OH acrylic polyols, and vinyl resins. It can be used in 2K varnishes and enamels. This product is highe...展开 Polurene AD 72 is a polyurethane adduct with low free TDI content. This product is highly compatible with nitrocellulose, CAB, saturated polyesters, OH acrylic polyols, and vinyl resins. It can be used in 2K varnishes and enamels. This product is higher in hardness and reactivity than a traditional adduct. It contains less than .5% TDI isocyanates. 收起 | |
| Polurene BK 50 AE | S.A.P.I.C.I. SpA | Polurene BK 50 AE is a TDI-based polymer containing blocked and curable isocyanic groups. This product can be used as an adhesive in non-woven fabrics, PVC, and fabric laminations, among other uses. It contains 50% non-volatiles. | |
| Polurene FP75 | S.A.P.I.C.I. SpA | Polurene FP75 is a polyurethane adduct with low free TDI content. This product meets EU, BFR, and FDA standards for food packaging. It can be used in 2K adhesives and inks. Polurene FP75 contains less than .5% TDI isocyanates. | |
| Polurene HR.B | S.A.P.I.C.I. SpA | Polurene HR.B is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers and matt topcoats. This product contains less than .5% TDI isocyanates. | |
| Polurene HR.B.S. | S.A.P.I.C.I. SpA | Polurene HR.B.S. is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers and matt topcoats. Polurene HR.B.S. is compatible with nitrocellulose. It contains less than .5% T...展开 Polurene HR.B.S. is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers and matt topcoats. Polurene HR.B.S. is compatible with nitrocellulose. It contains less than .5% TDI isocyanates. 收起 | |
| Polurene IAX 3719 | S.A.P.I.C.I. SpA | Polurene IAX 3719 is an MDI-based polyurethane resin. This product has strong initial bond. It can be used as a 1K adhesive in PVC systems, expanded polyurethane, and natural or synthetic fabrics. | |
| Polurene IR 51 AB | S.A.P.I.C.I. SpA | Polurene IR 51 AB is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers and matt topcoats. This product contains less than .5% TDI isocyanates. | |
| Polurene IR 51 AE | S.A.P.I.C.I. SpA | Polurene IR 51 AE is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers, matt topcoats, adhesives, and inks. This product contains less than .3% TDI isocyanates. | |
| Polurene IR 51 K | S.A.P.I.C.I. SpA | Polurene IR 51 K is an aromatic isocyanurate based on toluenediisocyanate. This product cures quickly, with limited yellowing, good elasticity, and felxibility. It can be used in combination with any Rexin K saturated polyester in order to product prime...展开 Polurene IR 51 K is an aromatic isocyanurate based on toluenediisocyanate. This product cures quickly, with limited yellowing, good elasticity, and felxibility. It can be used in combination with any Rexin K saturated polyester in order to product primer or overprint varnishes. 收起 | |
| Polurene KC | S.A.P.I.C.I. SpA | Polurene KC is a mixed isocyanurate. This product sands well, either by hand or with sanding machines. It dries quickly with good elasticity. Polurene KC can be used in polyurethane sealers and matt topcoats. In particular, use of this product can imp...展开 Polurene KC is a mixed isocyanurate. This product sands well, either by hand or with sanding machines. It dries quickly with good elasticity. Polurene KC can be used in polyurethane sealers and matt topcoats. In particular, use of this product can improve between-layer adhesion. 收起 | |
| Polurene LP 100 LV | S.A.P.I.C.I. SpA | Polurene LP 100 LV is a polyurethane prepolymer containing blocked isocyanic groups. This product has good rheology and can be used to improve the flexibility of epoxy systems. It is designed for use in adhesives. | |
| Polurene LP 100 NFF | S.A.P.I.C.I. SpA | Polurene LP 100 NFF is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product has good rheology and does not release any nonyl-phenoles, which reduces its hazard classification. It can be used as an adhesive in improving t...展开 Polurene LP 100 NFF is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product has good rheology and does not release any nonyl-phenoles, which reduces its hazard classification. It can be used as an adhesive in improving the flexibility of epoxy systems. 收起 | |
| Polurene LP 1810 | S.A.P.I.C.I. SpA | Polurene LP 1810 is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product is used in combination for aliphatic diamines for solvent-free coatings. It can be formulated in 1K stoving enamel applications for automotives and...展开 Polurene LP 1810 is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product is used in combination for aliphatic diamines for solvent-free coatings. It can be formulated in 1K stoving enamel applications for automotives and coil coatings. 收起 | |
| Polurene LP 80 LV | S.A.P.I.C.I. SpA | Polurene LP 80 LV is a TDI-based branched polymer in DOA containing blocked and curable isocyanic groups. This product has very low viscosity and good rheology. It can be used to improve the flexibility of epoxy systems for adhesives, sealants, and memb...展开 Polurene LP 80 LV is a TDI-based branched polymer in DOA containing blocked and curable isocyanic groups. This product has very low viscosity and good rheology. It can be used to improve the flexibility of epoxy systems for adhesives, sealants, and membranes. 收起 | |
| Polurene LP 90 LV | S.A.P.I.C.I. SpA | Polurene LP 90 LV is a TDI-based branched polymer in DOA containing blocked and curable isocyanic groups. This product has very low viscosity and good rheology. It can be used to improve the flexibility of epoxy systems for adhesives, sealants, and memb...展开 Polurene LP 90 LV is a TDI-based branched polymer in DOA containing blocked and curable isocyanic groups. This product has very low viscosity and good rheology. It can be used to improve the flexibility of epoxy systems for adhesives, sealants, and membranes. 收起 | |
| Polurene LPI 103 | S.A.P.I.C.I. SpA | Polurene LPI 103 is an MDI-based 1K adhesive. This product has strong initial bond. It can be used in PVC applications, expanded polyurethane, and natural or synthetic fabrics. | |
| Polurene LPI 1272 | S.A.P.I.C.I. SpA | Polurene LPI 1272 is a solvent-free MDI-based polyurethane resin. This product can be used as an adhesive in sandwich panels for thermal and acoustic insulation. It contains 100% non-volatiles. | |
| Polurene LPI 2572 | S.A.P.I.C.I. SpA | Polurene LPI 2572 is a solvent-free MDI-based polyurethane resin. This product can be used as an adhesive in sandwich panels for thermal and acoustic insulation. It contains 100% non-volatiles. | |
| Polurene LPI 407 | S.A.P.I.C.I. SpA | Polurene LPI 407is a MDI-based polyester/polyether blend 2K adhesive in ethyl acetate. This product has strong initial bond and can be used in PVC, polyurethane, and natural or synthetic fabrics. | |
| Polurene LPI 433 | S.A.P.I.C.I. SpA | Polurene LPI 433 is a MDI polyether, 2K 100% solid content adhesive. This product has strong initial bond. It can be used in PVC, expanded polyurethane, and natural or synthetic fabrics. | |
| Polurene M 75 | S.A.P.I.C.I. SpA | Polurene M 75 is an aliphatic polyisocyanate. This product can be used in non-yellowing systems. In particular, it can be used in combination with hydroxide acrylic resins and saturated polyester in order to create 2K paints and enamels for metal, wood ...展开 Polurene M 75 is an aliphatic polyisocyanate. This product can be used in non-yellowing systems. In particular, it can be used in combination with hydroxide acrylic resins and saturated polyester in order to create 2K paints and enamels for metal, wood and plastics. It contains less than .2% HDI isocyanates. 收起 | |
| Polurene MBD 2 | S.A.P.I.C.I. SpA | Polurene MBD 2 is a blocked isocyanate. This product should be used in non-yellowing 1K stoving enamels. It can be used in traditional stoving enamels in order to increase flexibility and adhesion. | |
| Polurene MD 1500 | S.A.P.I.C.I. SpA | Polurene MD 1500 is a polyfunctional polyisocyanate of 4,4-diphenylmethane diisocyanate. This product dries quickly with good flexibility. It can be used in solvent-free polyurethane coatings like sealants, synthetic mortars, and self-leveling compounds...展开 Polurene MD 1500 is a polyfunctional polyisocyanate of 4,4-diphenylmethane diisocyanate. This product dries quickly with good flexibility. It can be used in solvent-free polyurethane coatings like sealants, synthetic mortars, and self-leveling compounds. 收起 | |
| Polurene MD 1600 | S.A.P.I.C.I. SpA | Polurene MD 1600 is a polyfunctional polyisocyanate based on MDI. This product dries quickly with good flexibility. It can be used in solvent-free polyurethane coatings like adhesives, 2K primers, sealants, and self-leveling compounds. | |
| Polurene MD 60 AB | S.A.P.I.C.I. SpA | Polurene MD 60 AB is a polyfunctional polyisocyanate prepolymer based on MDI. This product dries quickly with good flexibility. It can be used in coatings. When used in combination with isocyanurates, it can improve scratch resistance and overcoating t...展开 Polurene MD 60 AB is a polyfunctional polyisocyanate prepolymer based on MDI. This product dries quickly with good flexibility. It can be used in coatings. When used in combination with isocyanurates, it can improve scratch resistance and overcoating tendencies, resulting in a smooth surface with good brightness. It also improves adhesion on difficult substrates. 收起 | |
| Polurene MD 70 AE | S.A.P.I.C.I. SpA | Polurene MD 70 AE is a polyfunctional polyisocyanate prepolymer based on MDI. This product dries quickly with good flexibility. When used in combination with isocyanates, it improves scratch resistance and overcoatings giving a smooth surface and good b...展开 Polurene MD 70 AE is a polyfunctional polyisocyanate prepolymer based on MDI. This product dries quickly with good flexibility. When used in combination with isocyanates, it improves scratch resistance and overcoatings giving a smooth surface and good brightness. It can be used in 1K barrier coatings for wood with high oil content. 收起 | |
| Polurene MT 100 | S.A.P.I.C.I. SpA | Polurene MT 100 is an HDI trymer. This product is designed for non-yellowing systems. It can be used in 2K paints and enamels for metal, wood and plastics, all of which contain high solids. This product contains less than .2% HDI isocyanates. | |
| Polurene MT 100 LLV | S.A.P.I.C.I. SpA | Polurene MT 100 LLV is an HDI trymer. This product is designed for non-yellowing systems. It can be used in 2K enamels for metal, wood and plastics that contain high solids. This product contains less than .2% HDI isocyanates. | |
| Polurene MT 75 | S.A.P.I.C.I. SpA | Polurene MT 75 is an aliphatic polyisocyanate. This product is designed for non-yellowing systems with improved performance. In particular, it can be used in combination with hydroxide acrylic resins and saturated polyesters in order to make 2K paints a...展开 Polurene MT 75 is an aliphatic polyisocyanate. This product is designed for non-yellowing systems with improved performance. In particular, it can be used in combination with hydroxide acrylic resins and saturated polyesters in order to make 2K paints and enamels for metal, wood and plastics. This product contains less than .2% HDI isocyanates. 收起 | |
| Polurene MT 90 | S.A.P.I.C.I. SpA | Polurene MT 90 is an HDI trymer. This product is designed for non-yellowing systems. It can be used in low viscosity 2K paints and enamels for metal, wood and plastics, all of which contain high solids. This product contains less than .2% HDI isocyanat...展开 Polurene MT 90 is an HDI trymer. This product is designed for non-yellowing systems. It can be used in low viscosity 2K paints and enamels for metal, wood and plastics, all of which contain high solids. This product contains less than .2% HDI isocyanates. 收起 | |
| Polurene MT 90 AB | S.A.P.I.C.I. SpA | Polurene MT 90 AB is an HDI trymer. This product is designed for non-yellowing systems. It can be used in low-viscosity 2K paints and enamels for metal, wood and plastics that contain high solids. This product contains less than .2% HDI isocyanates. | |
| Polurene OK K | S.A.P.I.C.I. SpA | Polurene OK K is an aliphatic-aromatic isocyanurate. This product dries quickly. If used in combination with saturated polyesters, it can be used in the formulation of overprinting coatings and for inks with good non-yellowing properties. | |
| Polurene OK-HP | S.A.P.I.C.I. SpA | Polurene OK-HP is an aliphatic-aromatic isocyanurate. This product is compatible with aromatic solvents, nitrocellulose, CAB, and hydroxide acrylic resins. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with...展开 Polurene OK-HP is an aliphatic-aromatic isocyanurate. This product is compatible with aromatic solvents, nitrocellulose, CAB, and hydroxide acrylic resins. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics, and other substrates. This product contains less than .5% TDI or HDI isocyanates. 收起 | |
| Polurene OK.D | S.A.P.I.C.I. SpA | Polurene OK.D is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics, and other s...展开 Polurene OK.D is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics, and other substrates. This product contains less than .5% TDI or HDI isocyanates. 收起 |
