| EXOCOAT™ 151A | Axcentive Sarl | EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...展开 EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151A. It can be used as a general air purifier. Though most effective in outdoor light conditions, it is adapted for use under visible light as found in the interior. In all cases, it should be used as a topcoat to ensure its full effect. Glass and walls coated with EXOCOAT® 151A are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It may be used on other flat surfaces such as plastics or coated substrates yet only interior. It dries under room temperature conditions. Spray application is recommended to reach thin monolayers which prove to be more effective. It is listed with EINECS. TSCA, AICS, and CEPA. 收起 | |
| EXOCOAT™ 151B | Axcentive Sarl | EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...展开 EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151B. In all cases, it should be used as a topcoat to ensure its full effect. EXOCOAT® 151B coated walls are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It is targeted for porous substrates like concrete, brickwork, and gypsum. It is not meant for glass substrates. It dries under room temperature conditions. Brush, roller, or Spray application is recommended to reach homogeneous coatings. It is listed with EINECS. TSCA, AICS, and CEPA. 收起 | |
| EXOCOAT™ ACX-W | Axcentive Sarl | EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless ...展开 EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It is used as a replacement for chromium-based primers on aluminum and other metals. It can be used as a conversion primer for a coating system based on an epoxy coating and polyurethane topcoat. It may omit toxic chemicals and functions as a replacement for Cr3+ and Cr6+-based systems used in metal plating and aerospace industries. EXOCOAT® ACX-W is applied with conventional low-pressure and high-pressure airless and air-mix spraying, dipping, rolling and brushing. It has a shelf life of 12 months. 收起 | |
| EXOCOAT™ AM | Axcentive Sarl | EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down v...展开 EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down viruses and bacteria. It eradicates viruses such as influenza, SARS-COV-2, dengue & hepatitis and bacteria such as E. coli, MSRA, streptococcus, listeria, pneumonia, and salmonella. It is activated by light and displays quick drying at room temperature. Spray application is recommended to reach thin monolayers. It exhibits curing at room temperature up to 300°C and super hard particles (1GPa Vickers). It is easy to apply & durable, allowing longer disinfection intervals while preserving hygiene level. It shows non-silver leaching, efficacious even under low light conditions, lower service frequency, and no need for frequent disinfection routine. It is used in the state-of-the-art continuous antimicrobial coating for high-traffic areas. EXOCOAT® AM is suitable for topcoats for any surface inside buildings, stores, hospitals, and vehicles. The shelf life of this product is 9 months. 收起 | |
| EXOCOAT™ SH | Axcentive Sarl | EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pave...展开 EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pavement, walls, and stucco to get the so-called Lotus Effect. The sol-gel system deposits superhydrophobic particles on the porous substrate. EXOCOAT® SH will not form a film and as a result, the wall stays breathable. With the contact angle of 145o water droplets bounce back from the surface and will roll down immediately upon touch. Thus, the wall remains dry, and clean and will behave as an efficient barrier against water. 收起 | |
| ONEX MB 1000RE | Glonatech S.A. | ONEX MB 1000RE is a multi-wall carbon nanotube masterbatch that is designed to provide high dispersion, thermal stability, and thermal conductivity. This product is a liquid dispersion and tested with microscopic analysis techniques. Common applications o...展开 ONEX MB 1000RE is a multi-wall carbon nanotube masterbatch that is designed to provide high dispersion, thermal stability, and thermal conductivity. This product is a liquid dispersion and tested with microscopic analysis techniques. Common applications of this product include adhesives, marine coatings, and resin-based parts. 收起 | |
| ONEX MW 1000C1 | Glonatech S.A. | ONEX MW 1000C1 are high purity, multi-wall carbon nanotubes that are designed to provide mechanical, electrical, and thermal properties in final products where a high strength to weight ratio is required. This product has a carbon purity of ≥94.0% and is ...展开 ONEX MW 1000C1 are high purity, multi-wall carbon nanotubes that are designed to provide mechanical, electrical, and thermal properties in final products where a high strength to weight ratio is required. This product has a carbon purity of ≥94.0% and is commonly applied in coatings and automotive/marine applications. 收起 | |
| ONEX MW 1000C2 | Glonatech S.A. | ONEX MW 1000C2 are high purity, multi-wall carbon nanotubes that are designed to provide mechanical, electrical, and thermal properties in final products where a high strength to weight ratio is required. This product has a carbon purity of ≥90.0% and is ...展开 ONEX MW 1000C2 are high purity, multi-wall carbon nanotubes that are designed to provide mechanical, electrical, and thermal properties in final products where a high strength to weight ratio is required. This product has a carbon purity of ≥90.0% and is commonly applied in coatings and automotive/marine applications. 收起 | |
| ONEX MW 1000C3 | Glonatech S.A. | ONEX MW 1000C3 are high purity, multi-wall carbon nanotubes that are designed to provide mechanical, electrical, and thermal properties in final products where a high strength to weight ratio is required. This product has a carbon purity of ≥98.0% and is ...展开 ONEX MW 1000C3 are high purity, multi-wall carbon nanotubes that are designed to provide mechanical, electrical, and thermal properties in final products where a high strength to weight ratio is required. This product has a carbon purity of ≥98.0% and is commonly applied in coatings and automotive/marine applications. 收起 | |
| ONEX MW 1000C4 | Glonatech S.A. | ONEX MW 1000C4 are high purity, multi-wall carbon nanotubes that are designed to provide mechanical, electrical, and thermal properties in final products where a high strength to weight ratio is required. This product has a carbon purity of ≥90.0-98.0% an...展开 ONEX MW 1000C4 are high purity, multi-wall carbon nanotubes that are designed to provide mechanical, electrical, and thermal properties in final products where a high strength to weight ratio is required. This product has a carbon purity of ≥90.0-98.0% and is commonly applied in coatings and automotive/marine applications. 收起 | |
| ONEX MW 1001 | Glonatech S.A. | ONEX MW 1001 is a carboxyl functionalized multi-wall carbon nanotube that is designed to provide high dispersibility in a wide range of organic solvents that are incorporated into plastics and resins. Common applications of this product include marine coa...展开 ONEX MW 1001 is a carboxyl functionalized multi-wall carbon nanotube that is designed to provide high dispersibility in a wide range of organic solvents that are incorporated into plastics and resins. Common applications of this product include marine coatings and adhesives. 收起 | |
| ONEX MW 1002 | Glonatech S.A. | ONEX MW 1002 is a phenol functionalized multi-wall carbon nanotube that is designed to provide high dispersibility in a wide range of organic solvents that are incorporated into plastics and resins. Common applications of this product include marine coati...展开 ONEX MW 1002 is a phenol functionalized multi-wall carbon nanotube that is designed to provide high dispersibility in a wide range of organic solvents that are incorporated into plastics and resins. Common applications of this product include marine coatings and adhesives. 收起 | |
| ONEX MW 1003 | Glonatech S.A. | ONEX MW 1003 is a amino functionalized multi-wall carbon nanotube that is designed to provide high dispersibility in a wide range of organic solvents that are incorporated into plastics and resins. Common applications of this product include marine coatin...展开 ONEX MW 1003 is a amino functionalized multi-wall carbon nanotube that is designed to provide high dispersibility in a wide range of organic solvents that are incorporated into plastics and resins. Common applications of this product include marine coatings and adhesives. 收起 |
