UL Prospector
Prospector
Company: Hangzhou Shine Chemical Co., Ltd.  Company: BASF Formulation Additives 巴斯夫配方助剂  Company: BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料  Company: Allnex  Clear All 

成功!

成功保存搜索结果
1834 条结果
ACROCRYL™ 63-972 Allnex ACROCRYL™ 63-972 is a very hard, APEO free, high molecular weight acrylic copolymer emulsion with excellent gloss and clarity, excellent blanch and water resistance, very good toughness and flexibility and good solvent and alkali resistance. Pendant react...展开 ACROCRYL™ 63-972 is a very hard, APEO free, high molecular weight acrylic copolymer emulsion with excellent gloss and clarity, excellent blanch and water resistance, very good toughness and flexibility and good solvent and alkali resistance. Pendant reactive groups on the polymer confer thermal or ambient-temperature crosslinking. 收起 Request Sample
Acronal® 296 D ap BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 阴离子乳液聚合物，粘度中等。它含有细小、良好分散的颗粒。它与颜填料具有出色的相容性。对颜料具有非常高的粘合力。未着色的Acronal®296 D apare涂膜透明、柔韧、高光泽，具有极高的耐水性和非常好的耐皂化性能
Acronal® 296 DS ap BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 高品质、通用型建筑涂料用乳液聚合物。Acronal® 296 DS ap是一种阴离子型低粘度的乳液聚合物，它由细小的微粒组成。与颜填料有出色的兼容性，具备超强的颜料粘结力。Acronal® 296 DS ap乳液膜在室温下不粘手。Acronal® 296 DS ap乳液膜透明，柔软且有光泽，具有极好的耐水性，且具备出色的耐皂化特性。
Acronal® 7015 BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 一种具有中等黏度的细微分散乳液聚合物。它是一种拥有与常用填料及添加物良好兼容性的丙烯酸乳液，同时其对填料有着很好的粘结力。其在20℃左右可形成具有高硬度、高弹性以及很好的抗黏连性特点的膜.Acronal® 7015形成的膜具有优异的耐水性和耐光性，同时对于皂化和风化有着很好的抗性。它有着良好的耐水白性，即使在水中浸泡很长时间变白后仍能回复。
Acronal® 7016 G BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 一种阴离子型中等粘度的乳液聚合物。它由细小的微粒组成，是一种拥有优异户外耐久性和耐沾污性的纯丙烯酸共聚物。能使涂膜拥有良好的耐擦洗性、抗粘连性、对混凝土表面有良好的附着力。
Acronal® 7026 BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 良好分散的的聚合物乳液，粘度低。该乳液形成的涂膜在很宽的温度范围内具有高弹性，尤其是在寒冷气候环境下。与填料和颜料具有出色的相容性。它具有非常高的颜料粘合力。用Acronal®7026形成的涂膜具有出色的耐水、耐碱性能和耐风化性能。Acronal®7026配制的弹性墙面涂料具有良好的耐毛细裂纹，由于采用了紫外表面交联技术，即使在温暖高污染的环境下也具有非常好的耐玷污性能
Acronal® 7026 G BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 一种细小粒径的低粘度乳液聚合物。这种乳液膜在各种温度条件下，特别是在气候寒冷地区都能保持良好弹性。它与颜填料相容性非常好，具有很强的颜填料的承载能力。Acronal® 7026 G 形成的涂膜具有优异的耐水、耐碱和抗风化性能。其配制的弹性墙面漆具有细微裂纹桥接功能，同时由于运用了紫外光表面交联技术，即便在热的天气和污染严重的环境中也表现出很强的耐沾污性能。
Acronal® 7035 BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 耐擦洗性能优异的高PVC内墙涂料用乳液聚合物 Acronal®7035是不含APEO的低粘度阴离子乳液.它由细小的乳液粒子组成. Acronal®7035具有很高的对颜填料的粘结力，因此它即使在很高PVC时仍然 使得涂料具有突出的耐擦洗性
Acronal® 7035 G BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 耐擦洗性能优异的高PVC内墙涂料用乳液聚合物。Acronal®7035G是不含APEO的低粘度阴离子乳液.它由细小的乳液粒子组成。Acronal®7035G具有很高的对颜填料的粘结力，因此它即使在很高PVC时仍然使得涂料具有突出的耐擦洗性
Acronal® 7037 BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 具有极佳耐擦洗性多功能内墙建筑涂料用乳液聚合物,Acronal® 7037是一种不含APEO的低黏度阴离子乳液聚合物。它由细小的乳液粒子组成。Acronal® 7037 具有很高的对颜填料的粘结力，因此它即使在很高PVC时仍然使得涂料具有突出的耐擦洗性。
Acronal® 7051 BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 适用于真石漆和质感涂料的水性聚合物乳液 Acronal®7051是一种具有中等黏度的细微分散乳液聚合物。它是一种与常用颜料及骨料具有良好相容性的纯丙烯酸乳液，同时其具有优异的钙离子稳定性。其涂膜坚韧，具有柔性及抗粘连性。Acronal® 7051形成的膜具高耐水性、耐光性，优异的抗皂化性及耐候性。即使在水中长时间浸泡，涂膜也不会水白。
Acronal® A 684 BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 通用型，具有出色的附着力和出色的耐候性
Acronal® CN 18 ap BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 不含甲醛、中等黏度、细小粒径的乳液聚合物。与颜填料有出色的兼容性。聚合物乳液干膜透明，柔软有光泽，杰出的耐水和抗皂化性能。
Acronal® DS 6266 ap BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 可广泛用于各种乳胶漆和质感面漆的聚合物乳液 Acronal®DS 6266 ap 是一种中等粘度的阴离子型聚合物乳液。它拥有极细的 粒径，能形成无色、透明滑爽的涂膜。产品性能优异，具有良好的抗发白性、低吸水性和高耐候性。
Acronal® ECO 338 AP BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 是一种细粒径，低黏度的水性乳液。无气味，而且不包含氨水，溶剂及增塑剂。它与常用的颜料与填料展现优异的相容性。形成的涂膜透明，柔性且有光泽，并具备好的耐水性及耐水解性。
Acronal® ECO 502 AP BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 是低黏度，细小乳胶，无气味，不含氨水及任何溶剂或增塑剂，拥有出色的颜料相容性和粘结能力，而且配方内不需要助成膜助剂。其干膜透明，有光泽和弹性，并有很好的耐水和抗水解性能。
Acronal® ECO 612 AP BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 全丙烯酸共聚物，用于低光泽建筑涂料。用Acronal®ECO 612 ap形成的涂料能在保持VOC含量接近零的条件下满足严苛性能。由于其出色的附着力和抗粘连性能，Acronal®ECO 612 ap配制的涂料非常适合各种表面类型和应用。另外，Acronal®ECO 612 ap表现出优秀的耐常规家庭污染物的能力
Acronal® ECO 702 AP BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 是一种阴离子型中等黏度，细小粒径的水性乳胶。拥有优异的颜料和填料的相容性与粘结性能。Acronal ECO 702 ap 在无颜填料时形成的膜透明，有弹性和光泽，并具有出色的耐水和抗皂化性能。
Acronal® ECO 7078 BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 耐沾污性能出众的乳液聚合物。（依据 GB/T 9780 建筑涂料涂层耐沾污性试验方法）Acronal® ECO 7078 粒径细，粘度低， 无气味且不含氨、溶剂和增塑剂。 在常用的内墙涂料配方中，表现出优秀的耐沾污性与耐湿擦洗性。
Acronal® ECO 9056 AP BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 阴离子乳液聚合物，具有中等粘度。它含有细小良好分散的颗粒。它与颜料和填料具有出色的相容性。它具有非常高的颜料粘合力。未着色的Acronal®ECO 9056涂膜可在室温下指干。Acronal®ECO 9056的涂膜透明、柔韧和高光，具有极高的耐水性和非常好的耐皂化性能
Acronal® Flex SC 138 AP BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 良好分散的聚合物乳液，粘度低。与填料和颜料具有出色的相容性。它具有非常高的颜料粘合力。用Acronal®FLEX SC 138形成的涂膜具有出色的耐水、耐碱性能和耐候性。Acronal®FLEX SC 138配制的弹性墙面涂料即使在温暖高污染的环境下也具有良好的耐毛细裂纹以及非常好的耐玷污性能
Acronal® GS 409 AP BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 是一种低粘度细小粒径聚合物乳液。它与填料和颜料具有优异的相容性，同时具有极高的颜料粘结力。由Acronal GS 409 ap形成的漆膜具有优异的耐水性、耐碱性和耐候性。采用Acronal GS 409 ap配制的弹性涂料能能够提供毛细裂纹的桥接，即使在温暖和污染的环境中，也具有非常出色的耐沾污性。
Acronal® IA734 ap BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 Acronal® IA734 ap是一种直链丙烯酸阴离子乳液聚合物，专门设计用于顶级户外应用。聚合物细而窄的粒径分布确保了良好的附着力。交联作用使它获得最好的机械性能而无需牺牲耐沾污性。它不含增塑剂和溶剂
Acronal® JC 7043 X BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 是一种拥有细小粒径和低粘度的阴离子R-C乳液。它是一 种长链的丙烯酸和苯乙烯共聚物，具备优异的对粉化基材的渗透性和优异的耐碱性，适用于水性渗透性和耐碱性底漆，该底漆可替代溶剂型体系。该产品对粉化砖石基材具有优异的粘结力。 Acronal® JC 7043 适用于制备全效合一水性底漆产品。
Acronal® LR8977 BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 安固力® LR8977是一种自交联丙烯酸乳液，用于工业金属防护涂料。很好的抗压粘性。适用高PVC配方。不含APEO，与防锈颜料相容性好，具有优异的金属防护性能
Acronal® NX 3587 BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 Acronal® NX 3587是一种水性丙烯酸乳液，用于弹性屋顶涂料。它是一种BASF新设计的聚合物，解决了弹性屋顶涂料工业的许多顾虑。首先，它是一种含可交联官能团的纯丙烯酸聚合物，这不仅仅提高的聚合物的抗张强度，而且改善了基材的附着力尤其是在聚氨酯上。其次，Acronal® NX 3587解决了当作为白色涂料遮盖沥青基材时的耐沥青渗出问题。根据紫外和热(50°C) 条件下的测试，它显示几乎没有沥青渗出。最后，当该产品复合到典型的42 PVC弹性屋顶涂料配方中时，它显示了非常低的吸水值
Acronal® PA 510 BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 是一种阴离子型的分散介质的粘度。该乳液具有非常细的颗粒，提供优良的增稠响应。 ACRONAL®PA510配方的高光泽涂料耐高挡。 ACRONAL®PA510具有优异的湿附着力对木材和任何关键基材，尤其是老化醇酸的基材.
Acronal® PA 619 ap BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 Acronal®PA 619 ap为水性丙烯酸乳液，用于改性水硬性胶黏剂。它被推荐用于砂浆修补或喷涂应用。本产品所配制的混合物在高温下或多种类型水泥时均表现出优异的开罐可使用时间，夹带空气少，它可提供卓越的冷冻/解冻稳定性。 ACRONAL®PA 619 ap也建议用于水泥基瓷砖薄集胶粘剂，改性砂浆和水泥修复系统。相比未改性砂浆混合物，使用本产品改性的砂浆混合物具有更好的抗弯，抗拉强度和耐水渗透性。
Acronal® PA 807 ap BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 乳液聚合物，耐久、低粘灰，用于高品质户外乳胶漆。Acronal® PA 807 ap是一种阴离子乳液聚合物，粘度中等，含有细小、良好分散的颗粒。它是一种全丙烯酸共聚物具有出色的户外耐久性和良好的耐玷污性能。该聚合物制备的涂膜具有良好的耐擦洗性能，防粘连性能，良好的对圬工表面的附着力以及特别好的湿遮盖力。Acronal® PA 807 ap适合用于制备各种应用的油漆，可配制不同光泽水平。
Acronal® PLUS 7045 BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 低环境影响型抗菌内墙涂料用聚合物乳液 Acronal® PLUS 7045 是一种低气味、非渗出型抗菌涂料用乳液。Acronal® PLUS 7045 使用了特殊的聚合物载体，将银离子牢牢锁住，从而使其既具有优异的抗菌性能，又不会渗出衰减，同时不会导致涂料变灰。该乳液干燥后可以形成透明的高光涂膜，具有优异的耐水性及抗风化性能
Acronal® PLUS 7048 BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 Acronal® PLUS 7048是一种无气味的阴离子乳液聚合物，可提供去甲醛功能，适用于户内墙面涂料。它含特殊单体可帮助捕获室内房间里的游离甲醛。从它制备的涂膜清澈高光，具有出色的耐水和耐风化性能
Acronal® PLUS 7048G BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 Acronal® PLUS 7048G 是一种用于内墙抗甲醛涂料的低气味聚 合物乳液。Acronal® PLUS 7048G 采用了特殊的功能性单体，它能够帮助捕获室内空气中的游离甲醛。该乳液干燥后可以形成 透明的高光涂膜，具有优异的耐水性及抗风化性能。
Acronal® PRO80 BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 安固力® PRO80 是一种不含APEO，不含锌的丙烯酸乳液。具有非常好的防护性能和对湿热的屏蔽性。早期耐水性好，对各种颜填料的润湿性好。推荐用于金属底漆，中涂或面漆
Acronal® PS 608 ap BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 Acronal®PS608 ap为水性丙烯酸乳液，用于水硬性胶结剂的改性。它用来改性水硬性胶结剂，尤其是含有水泥的混合物。用本产品改性的化合物具有非常好的流体均一性，允许大大减少用水量，而不改变最终产品的性能。可看到弯曲强度显著增加。 ACRONAL®PS608 ap推荐用于制造修补砂浆，工业地坪找平，finescreeds，以及水泥基自流平化合物。
Acronal® PS 673 ap BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 Acronal®PS 673 ap为阴离子乳液聚合物，具有中等粘度。它含有小而细碎的颗粒。它与颜料和填料的相容性非常好，而且对颜料具有很高的粘结力。通过加入Acronal®PS 673 ap形成的膜是透明的，柔韧的，有光泽的，它们具有极高的防水性，并且具有非常好的耐皂化性能。本产品的未着色膜可在室温下表干。
Acronal® PS 707 ap BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 阴离子乳液聚合物，具有中等粘度。它含有细小良好溶解的无机盐。它的未着色涂膜光亮、透明、柔韧，具有耐水性和耐皂化性能
Acronal® PS 713 ap BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 ACRONAL®PS 713 ap是一种水性丙烯酸乳液，适合高品质胶黏水泥应用。它是一种高度通用的水性丙烯酸乳液，适合于不同的防水应用，并且对各种表面具有很高的附着力。它是一个功能强大的产品，它可提供高颜料粘合力，并具有高剪切力下非常好的稳定性。它可以被添加到研磨料中配制非常高固含量的涂料，制备厚膜。 ACRONAL®PS 713 ap被广泛应用于建筑行业，尤其是胶黏水泥防水。
Acronal® PS 715 ap BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 Acronal®PS 715 ap为水性丙烯酸乳液，用于胶黏水泥和抗碳化涂层。它是高性能胶黏水泥防水膜用的合适基料。由于它的弹性和优良的抗裂-桥接性能，它赋予了建筑物长期耐久性。基于此产品的胶黏水泥防水膜对各种基材具有良好的附着力和非常好的耐玷污性能。它可理想地用于外墙防水应用，以保护建筑物，防止漏水和来自天气的影响。
Acronal® PS 719 AP BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 Acronal®PS 719 ap是一种阴离子型乳液聚合物，粘度中等。它含有细小的良好分散的颗粒。它与颜料和填料具有出色的相容性。它具有非常高的颜料粘合力。未着色的Acronal®PS 719涂膜可在室温下指干。Acronal®PS 719的涂膜透明、柔韧和高光，具有极高的耐水性和非常好的耐皂化性能
Acronal® PS 791 AP BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 乳液聚合物，用于高品质通用型建筑涂料，Acronal® PS 791 ap是一种阴离子乳液聚合物，粘度低，含有细小、良好分散的颗粒。它具有与颜填料出色的相容性和非常高的颜料粘合力。未着色的Acronal® PS 791 ap涂膜可在室温下指干。Acronal® PS 791 ap形成的涂膜透明、柔韧、光泽高，具有极高的耐水性，和非常好的耐皂化性能
Acronal® S 400 F ap BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 ACRONAL®S400 F ap是一种水性丙烯酸乳液，用于弹性防水膜。水泥防水膜在耐久、高品质的建设项目中发挥重要作用。它是一种水性丙烯酸乳液，可为水泥防水膜提供出色的防水性和优异的抗裂缝-桥接性能。它不含有氨或甲醛，可增加您工作场所的健康和安全。
Acronal® S 727 BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 Acronal®S 727是疏水性共聚物基料，它含有活性化合物来阻止和锁定单宁和尼古丁。它创建了一个无粘性，弹性而耐用的膜。它可为热带木头和木节着色剂提供耐水性和出色的单宁阻隔性能。它不含任何配方中需要的附加氧化锌或替代活性化合物。本产品是单宁和尼古丁阻隔底漆，装饰和工业应用应用，它普遍适用于透明，特别是有色体系。
Acronal® Xpress 7512 ap BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 ACRONAL®Xpress AP 7512 ap是一种水性丙烯酸乳液，用于配制超快速固化胶黏水泥防水膜。它是快速固化技术单组分胶黏水泥防水膜界的“行业标杆”。它专门设计用于在高潮湿的气候条件下的快速重涂。巴斯夫的最新防水聚合物利用多种创新的表面特征和独特的成分组合，可实现低吸水率，出色的耐起泡性，高颜料粘合能力。
ACROPOL™ 63-075 Allnex ACROPOL™ 63-075 is a vinyl acetate homopolymer emulsion, providing good all-round formulating flexibility, excellent mechanical stability and fast-set characteristics. It is recommended for the formulation of packaging adhesives for most types of paper an...展开 ACROPOL™ 63-075 is a vinyl acetate homopolymer emulsion, providing good all-round formulating flexibility, excellent mechanical stability and fast-set characteristics. It is recommended for the formulation of packaging adhesives for most types of paper and board stock, and is also suitable for use as a base in compounded woodworking and building adhesives. 收起 Request Sample
ACROPOL™ 63-893 Allnex ACROPOL™ 63-893 is a high molecular weight vinyl acetate acrylic copolymer emulsion with good tint acceptance, stability to zinc oxide pigments and wide formulating latitude. It may be used to formulate a wide range of interior/exterior paints where it pr...展开 ACROPOL™ 63-893 is a high molecular weight vinyl acetate acrylic copolymer emulsion with good tint acceptance, stability to zinc oxide pigments and wide formulating latitude. It may be used to formulate a wide range of interior/exterior paints where it provides good scrub and wear resistance, and good early water resistance. 收起 Request Sample
ACROPOL™ 63-990 Allnex Acropol 63-990 is a high molecular weight vinyl acetate acrylic copolymer emulsion with good tint acceptance, and providing wide formulating latitude. It may be used to a wide range of low odour interior paints, with very good scrub and wear resistance an...展开 Acropol 63-990 is a high molecular weight vinyl acetate acrylic copolymer emulsion with good tint acceptance, and providing wide formulating latitude. It may be used to a wide range of low odour interior paints, with very good scrub and wear resistance and good resistance to blocking. 收起 Request Sample
ACURE™ 500 Allnex ACURE™ 500 is the first generation of blocked catalyst used in ACURE™ systems. ACURE™ 500 consists of a strong base which is blocked with di-ethyl carbonate. ACURE™ 500 unblocks with the release of alcohol and CO2 and is the key enabler to the provision o...展开 ACURE™ 500 is the first generation of blocked catalyst used in ACURE™ systems. ACURE™ 500 consists of a strong base which is blocked with di-ethyl carbonate. ACURE™ 500 unblocks with the release of alcohol and CO2 and is the key enabler to the provision of fast dry times with long pot lives in ACURE™ coatings. The rate at which ACURE™ 500 unblocks may be controlled by the addition of an alcohol (typically ethanol, n-propanol, or n-butanol) to the ACURE™ coating. 收起 Request Sample
ACURE™ 510-100 Allnex ACURE™ 510-100 is a malonate functional polyester resin. Request Sample
ACURE™ 510-170 Allnex ACURE™ 510-170 is a malonate functional polyester resin with succinimide. Request Sample
ACURE™ 510-174 Allnex ACURE™ 510-174 is a malonate functional polyester resin with a CH equivalent weight of 119 g/eq (calculated on as-supplied product), for use as a donor resin in ACURE systems. Contains 1.5 +/- 0.05 % succinimide, calculated on solid binder. Request Sample
ACURE™ 510-190 Allnex ACURE™ 510-190 is the donor resin in extremely fast drying topcoats for use in Marine and Protective and various premium, non-isocyanate topcoat systems, which is modified with s-SCA. ACURE™ based topcoats based on ACURE™ 510-190 feature excellent hardnes...展开 ACURE™ 510-190 is the donor resin in extremely fast drying topcoats for use in Marine and Protective and various premium, non-isocyanate topcoat systems, which is modified with s-SCA. ACURE™ based topcoats based on ACURE™ 510-190 feature excellent hardness development coupled with excellent outdoor durability, high cross line densities, outstanding chemical resistance and improved SAG resistance on vertical surfaces. 收起 Request Sample
ACURE™ 510-300 Allnex ACURE™ 510-300 is a malonate-functional high flow polyester resin, which functions as a donor resin in ACURE™, non-isocyanate, coatings systems. Acute based topcoats based on ACURE™ 510-300 feature excellent hardness development coupled with excellent out...展开 ACURE™ 510-300 is a malonate-functional high flow polyester resin, which functions as a donor resin in ACURE™, non-isocyanate, coatings systems. Acute based topcoats based on ACURE™ 510-300 feature excellent hardness development coupled with excellent outdoor durability, high cross-link densities and outstanding chemical resistance. ACURE™ paints exhibit extremely fast dry times combined with long pot lives and tuneable open times. 收起 Request Sample
ACURE™ 510-372 Allnex ACURE™ 510-372 is a modified malonate-functional high flow polyester resin, which functions as a donor resin in ACURE™, non-isocyanate, coatings systems. Acure™ topcoats based on Acure™ 510-372 feature fast development high hardness, excellent scratch/ma...展开 ACURE™ 510-372 is a modified malonate-functional high flow polyester resin, which functions as a donor resin in ACURE™, non-isocyanate, coatings systems. Acure™ topcoats based on Acure™ 510-372 feature fast development high hardness, excellent scratch/mar resistance, good flow and leveling, high cross-link densities, excellent solvent resistance, low applied VOCs, and good outdoor durability. Acure™ paints exhibit extremely fast dry times with long pot lives and tuneable open times. Acure 510-372™ contains 1.4 – 1.5% succinimide, a kinetic additive, which increases pot-life and open time. 收起 Request Sample
ACURE™ 510-400 Allnex ACURE™ 510-400 is a low molecular weight, acetoacetate functional resin which when used in ACURE™, non-isocyanate, systems in place of other kinetic additives, increases the water and humidity resistance of ACURE™ paint films. The acetoacetate functionali...展开 ACURE™ 510-400 is a low molecular weight, acetoacetate functional resin which when used in ACURE™, non-isocyanate, systems in place of other kinetic additives, increases the water and humidity resistance of ACURE™ paint films. The acetoacetate functionality allows this reactive diluent to crosslink and react in to the polymer network and is used as a modifying donor resin in ACURE™ systems. 收起 Request Sample
ACURE™ 550-100 Allnex ACURE™ 550-100 is an ACURE certified trimethylolpropane triacrylate. Request Sample
ACURE™ 550-105 Allnex ACURE™ 550-105 is an ACURE certified ditrimethylolpropane tetraacrylate. Request Sample
ADDITOL® BDK Allnex ADDITOL® BDK is a general-purpose radical photoinitiator that can be used alone or in combination with other photoinitiators. It is used in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturated polyesters. ...展开 ADDITOL® BDK is a general-purpose radical photoinitiator that can be used alone or in combination with other photoinitiators. It is used in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturated polyesters. With exposure to UV light, ADDITOL® BDK undergoes a photochemical reaction that generates radicals. 收起 Request Sample
ADDITOL® CPK Allnex ADDITOL® CPK is a radical photoinitiator that can be used alone or in combination with other photoinitiators. It is used in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturated polyesters. With exposure to...展开 ADDITOL® CPK is a radical photoinitiator that can be used alone or in combination with other photoinitiators. It is used in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturated polyesters. With exposure to UV light, ADDITOL® CPK undergoes a photochemical reaction that generates radicals. These radicals will initiate polymerization through the unsaturated groups present in the system. Suggested applications for ADDITOL® CPK include: paper upgrading, wood top-coats, hard-coats for plastics, overprint varnishes, vinyl flooring, metal coatings, exterior applications, general coating applications where low yellowing is critical, and inks and pigmented coatings (in combination with other photoinitiators). 收起 Request Sample
ADDITOL® dry CF100 Allnex ADDITOL® dry CF100 - drier/dryer/siccative - is a ready to use, universal Cobalt replacement drier designed to have excellent compatibility and fast incorporation in all solvent borne and waterborne alkyd paints. It is based on twin accelerated Manganese. Request Sample
ADDITOL® dry CF103 Allnex ADDITOL® Dry CF103 is a cobalt free (Co-free) accelerated primary drier based on Manganese (Mn). High performance set and through drying in alkyd paints, stains, natural oils and printing inks. Universal compatible in solvent borne (SB) and water based (W...展开 ADDITOL® Dry CF103 is a cobalt free (Co-free) accelerated primary drier based on Manganese (Mn). High performance set and through drying in alkyd paints, stains, natural oils and printing inks. Universal compatible in solvent borne (SB) and water based (WB) oxidative drying systems. Allows leveling without strong wrinkling tendency. Solvent free, ultra low VOC, high flash point (FP) for high handling safety. Long lasting drying performance with strongly reduces loss of dry effect. 收起 Request Sample
ADDITOL® dry CF200 Allnex ADDITOL® Dry CF200 contains a balanced auxiliary drier metal combination which optimizes oxidative drying in waterborne alkyd formulations. It is recommended to be used together with Cobalt free primary driers ADDITOL® Dry CF 100 or ADDITOL® Dry CF 101 fo...展开 ADDITOL® Dry CF200 contains a balanced auxiliary drier metal combination which optimizes oxidative drying in waterborne alkyd formulations. It is recommended to be used together with Cobalt free primary driers ADDITOL® Dry CF 100 or ADDITOL® Dry CF 101 for all oxidative drying waterborne alkyd resin paints. 收起 Request Sample
ADDITOL® dry CF300 Allnex ADDITOL® Dry CF300 contains a balanced auxiliary drier metal combination which optimizes oxidative drying in waterborne and solventborne alkyd formulations.. It is recommended to be used together with Cobalt free primary driers ADDITOL® Dry CF 100 for all...展开 ADDITOL® Dry CF300 contains a balanced auxiliary drier metal combination which optimizes oxidative drying in waterborne and solventborne alkyd formulations.. It is recommended to be used together with Cobalt free primary driers ADDITOL® Dry CF 100 for all oxidative drying waterborne alkyd resin paints. 收起 Request Sample
ADDITOL® E 04707 Allnex ADDITOL® E 04707 is a semi-crystalline polyester resin to be used as additive acting as polymeric flexibilizer for formulations based on superdurable polyurethanes. ADDITOL® E 04707 provides a higher degree of flexibility and mechanical resistance of coat...展开 ADDITOL® E 04707 is a semi-crystalline polyester resin to be used as additive acting as polymeric flexibilizer for formulations based on superdurable polyurethanes. ADDITOL® E 04707 provides a higher degree of flexibility and mechanical resistance of coatings. 收起 Request Sample
ADDITOL® HDMAP Allnex ADDITOL® HDMAP is a general-purpose radical photoinitiator that can be used alone or in combination with other photoinitiators. It is used in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturated polyesters...展开 ADDITOL® HDMAP is a general-purpose radical photoinitiator that can be used alone or in combination with other photoinitiators. It is used in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturated polyesters. With exposure to UV light, ADDITOL® HDMAP undergoes a photochemical reaction that generates radicals. These radicals will initiate polymerization through the unsaturated groups present in the system. Suggested applications for ADDITOL® HDMAP include: clear coats for metal and plastics, wood top-coats, overprint varnishes, paper upgrading, and inks and pigmented coatings (in combination with other photoinitiators). 收起 Request Sample
ADDITOL® ITX Allnex ADDITOL® ITX is used as a radical photoinitiator in UV inks and coatings. In combination with amine co-initiators or alpha cleavage photoinitiators, ADDITOL ITX is used in formulations containing unsaturated materials such as acrylates, methacrylates, vin...展开 ADDITOL® ITX is used as a radical photoinitiator in UV inks and coatings. In combination with amine co-initiators or alpha cleavage photoinitiators, ADDITOL ITX is used in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturated polyesters. With exposure to UV light, ADDITOL ITX undergoes a photochemical reaction that generates radicals. These radicals will initiate polymerization through the unsaturated groups present in the system. ADDITOL ITX is particularly suited to the curing of inks and pigmented coatings. In combinations with tertiary amine co-initiators such as EBECRYL® P104, EBECRYL P115, EBECRYL 7100 or MDEA, ADDITOL ITX provides good through cure along with surface cure. ADDITOL ITX is also effective as a sensitizer for alpha cleavage photoinitiators such as ADDITOL DMMTA. 收起 Request Sample
ADDITOL® MBF Allnex ADDITOL® MBF is a radical photoinitiator exhibiting very good surface cure. It can be used alone or in combination with other photoinitiators in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturared polyest...展开 ADDITOL® MBF is a radical photoinitiator exhibiting very good surface cure. It can be used alone or in combination with other photoinitiators in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturared polyesters. With exposure to UV light, ADDITOL® MBF undergoes a photochemical reaction that generates radicals. These radicals will initiate polymerization through the unsaturated groups present in the system. 收起 Request Sample
ADDITOL® P 791 Allnex 固体脂肪族聚酸酐固化剂，结合含缩水甘油基的固体丙烯酸树脂制备粉末涂料。基料比例与所采用缩水甘油基树脂的当量有关。适合丙烯酸应用 Request Sample
ADDITOL® P 824 Allnex 流平促进母料，用于粉末涂料。在户外耐候羟基聚酯基体中含有15％的活性剂。用于要求光泽和流平的应用场合 Request Sample
ADDITOL® P 891 Allnex ADDITOL® P 891 is a flow promoter masterbatch suitable for use in clear powder coatings. ADDITOL® P 891 contains approximately 5% active substance in an outdoor resistant carboxylated polyester matrix.The addition of 7-10% on binder is suggested for the m...展开 ADDITOL® P 891 is a flow promoter masterbatch suitable for use in clear powder coatings. ADDITOL® P 891 contains approximately 5% active substance in an outdoor resistant carboxylated polyester matrix.The addition of 7-10% on binder is suggested for the manufacture of haze-free clear coatings with very good flow. 收起 Request Sample
ADDITOL® P 896 Allnex 流平促进母料，适用于有色粉末涂料。 Request Sample
ADDITOL® P 920 Allnex 催化剂母料，设计用于制造皱纹效果。在羟基聚酯基体中含有5％的活性物质。适合需要皱纹表面效果的应用 Request Sample
ADDITOL® P 932 Allnex ADDITOL® P 932 is an aliphatic urethane pre-polymer crosslinking agent for use with hydroxyl terminated polyester resins for the manufacture of polyurethane powder coatings. Request Sample
ADDITOL® P 950 Allnex 具有摩擦带电活性的母料，用于混合型，TGIC型，聚氨酯型和TGIC替换体系。户内户外均可使用 Request Sample
ADDITOL® P 963 Allnex ADDITOL® P 963 is a catalyst masterbatch to be used in hybrid, TGIC or ARALDITE® PT-910 systems. ADDITOL® P 963 contains 5 % active substance and has been designed for indoor and outdoor use. ADDITOL® P 963 is easily handled and greatly improves dispersio...展开 ADDITOL® P 963 is a catalyst masterbatch to be used in hybrid, TGIC or ARALDITE® PT-910 systems. ADDITOL® P 963 contains 5 % active substance and has been designed for indoor and outdoor use. ADDITOL® P 963 is easily handled and greatly improves dispersion of the catalyst in powder coating formulations. 收起 Request Sample
ADDITOL® P 964 Allnex 催化剂母料，设计用于混合型、TGIC或Araldite PT-910体系 Request Sample
ADDITOL® P 965 Allnex 一种芳香族氨基甲酸酯加合物，用作羟基聚酯树脂交联剂，用于制备聚氨酯粉末涂料 Request Sample
ADDITOL® P 966 Allnex ADDITOL® P 966 is a catalyst masterbatch for use in TGIC or ARALDITE® PT-910 systems. This resin contains 5% active ingredient in a superdurable polyester resin matrix. ADDITOL® P 966 is easily handled and greatly improves dispersion of the catalyst in po...展开 ADDITOL® P 966 is a catalyst masterbatch for use in TGIC or ARALDITE® PT-910 systems. This resin contains 5% active ingredient in a superdurable polyester resin matrix. ADDITOL® P 966 is easily handled and greatly improves dispersion of the catalyst in powder coating formulations when mixed with superdurable resins. This material can also be used with CRYLCOAT® 4420-0 and CRYLCOAT® 4430-0 at varying levels in dry-blend systems to achieve adjustable low gloss values. 收起 Request Sample
ADDITOL® SXK 407 N Allnex ADDITOL® SXK 407 N is a catalyst for heat curing phenolic resins and combinations of phenolic- and epoxide resins. The addition of ADDITOL SXK 407 N also results in improved adhesion and resistance against sulphur staining. Request Sample
ADDITOL® TPO Allnex ADDITOL TPO是一种自由基光引发剂，可单独使用或结合其它光引发剂使用。它可用于引发含不饱和基团的材料，例如丙烯酸酯、甲基丙烯酸酯、乙烯基和不饱和聚酯。接触到紫外线，ADDITOL TPO会进行光化学反应产生自由基。这些自由基会引发体系中存在的不饱和基团进行聚合 Request Sample
ADDITOL® VXK 6365 Allnex ADDITOL® VXK 6365 increases the reactivity of polyisocyanates (blocked or not) with aqueous hydrofunctional binders. An enhanced reactivity of 2-pack isocyanate crosslinkable systems can negatively affect their storage stability. It is recommended to chec...展开 ADDITOL® VXK 6365 increases the reactivity of polyisocyanates (blocked or not) with aqueous hydrofunctional binders. An enhanced reactivity of 2-pack isocyanate crosslinkable systems can negatively affect their storage stability. It is recommended to check compatibility and potlife. 收起 Request Sample
ADDITOL® VXL 4930 N Allnex ADDITOL® VXL 4930 N -flow/leveling/levelling- is a modified silicone for improvement of levelling and surface smoothness of solvent containing and aqueous paints. Request Sample
ADDITOL® VXL 4950 Allnex 塑料制品的附着力促进底漆 Request Sample
ADDITOL® VXL 4992 Allnex ADDITOL® VXL 4992 serves as wetting and dispersing agent in high-body UP knifing fillers and glass fibre reinforced pigmented polyesters. It improves the pigment wetting, shortens the dispersion time, reduces the viscosity, enables the increase of the pig...展开 ADDITOL® VXL 4992 serves as wetting and dispersing agent in high-body UP knifing fillers and glass fibre reinforced pigmented polyesters. It improves the pigment wetting, shortens the dispersion time, reduces the viscosity, enables the increase of the pigment and filler concentration, improves the air release, and has better levelling and flow properties of the ready product. 收起 Request Sample
ADDITOL® VXL 6212 Allnex ADDITOL® VXL 6212 is a cationic, highly molecular resin-like wetting agent for inorganic and organic pigments. Request Sample
ADDITOL® VXL 6237 N Allnex ADDITOL®VXL 6237 N是阳离子，高分子量树脂类润湿和分散剂，适用于无机和有机颜料。它可提高非常难以分散的颜料的润湿，尤其是在无香气，无溶剂型，高档汽车系列，汽车维修和工业涂料。该产品还可缩短分散时间，防止颜料的再次絮凝，提高光泽度和流平性。 Request Sample
ADDITOL® VXW 4926 Allnex 消泡剂，用于水稀释油漆，无硅添加剂 Request Sample
ADDITOL® VXW 4934 Allnex ADDITOL® VXW 4934 is an additive for water-dilutable paints for the prevention of pigment settling, for the improvement of edge crawling at dipping application and for increase of sagging limit at spray application. Request Sample
ADDITOL® VXW 4940 N Allnex 无铅复合催干剂，可用水稀释 Request Sample
ADDITOL® VXW 4971 Allnex ADDITOL® VXW 4971 is a leveling & substrate wetting additive for WB paints & coatings. Request Sample
ADDITOL® VXW 4973 Allnex 高效消泡剂，基于矿物油，阻止塑胶乳液、乳胶漆、乳液漆、乳液胶粘剂和塑性抹灰中形成气泡，不含硅添加剂 Request Sample
ADDITOL® VXW 5907 Allnex 消泡剂，未添加硅，用于水性油漆 Request Sample
ADDITOL® VXW 6200 Allnex 聚合物阴离子乳液添加剂，用于高光，缎光涂料和乳胶漆 Request Sample
ADDITOL® VXW 6206 Allnex 乳化的，不含壬基苯酚乙氧基化物的，钴锂锆的组合干燥剂 Request Sample
ADDITOL® VXW 6208 Allnex 聚合物非离子乳液添加剂，用于在水中或水性醇酸树脂、丙烯酸、环氧和聚氨酯乳液中碾磨无机和有机颜料 Request Sample
ADDITOL® VXW 6208/60 Allnex ADDITOL® VXW 6208/60 is a polymeric non-ionic dispersing and wetting additive for solvent-borne, solvent-free and water-dilutable paint systems. It enhances the gloss and stabilizes the achieved degree of gloss. It decreases viscosity, especially in high‐...展开 ADDITOL® VXW 6208/60 is a polymeric non-ionic dispersing and wetting additive for solvent-borne, solvent-free and water-dilutable paint systems. It enhances the gloss and stabilizes the achieved degree of gloss. It decreases viscosity, especially in high‐filled paint systems. This product is used for the production of binder‐free pigment pastes and for tinting base colors. ADDITOL® VXW 6208/60 is mainly applied as wetting agent in solvent‐free and solvent‐borne two pack‐epoxy‐systems. 收起 Request Sample
ADDITOL® VXW 6210 N Allnex ADDITOL® VXW 6210 N is a silicone modified defoamer for emulsion paints, alkyd resin emulsion paints, and waterborne two-component EP paints. It is a highly effective dfoamer that is easily emulsive in water with good incorporating ability into all waterb...展开 ADDITOL® VXW 6210 N is a silicone modified defoamer for emulsion paints, alkyd resin emulsion paints, and waterborne two-component EP paints. It is a highly effective dfoamer that is easily emulsive in water with good incorporating ability into all waterborne paint systems. This product is recommended for mainly low and medium-viscosity paints, such as gloss and silky gloss emulsions paints, and coatings for parquet floors and furniture on the basis of acrylate and acrylate/polyurethane emulsions. 收起 Request Sample
ADDITOL® VXW 6211 Allnex 用于乳胶漆的消泡剂，尤其是用作胶粘剂，可满足联邦卫生局的要求 Request Sample
ADDITOL® VXW 6235 Allnex ADDITOL® VXW 6235 is a foam retardant that is mainly recommended for powder coating materials to be used in aqueous systems such as: emulsion paints, 2-component epoxy systems, plasterwork, filling compounds and scalants, flooring compounds, and adhesives...展开 ADDITOL® VXW 6235 is a foam retardant that is mainly recommended for powder coating materials to be used in aqueous systems such as: emulsion paints, 2-component epoxy systems, plasterwork, filling compounds and scalants, flooring compounds, and adhesives. 收起 Request Sample
ADDITOL® VXW 6251 Allnex ADDITOL® VXW 6251 is a curing component for cathodic precipitable acrylate binders. Request Sample
ADDITOL® VXW 6252 Allnex ADDITOL® VXW 6252 is a curing component for cathodic precipitable acrylate binders. Request Sample