| Benzidine Orange R | Emperor Pigment Co., Ltd. | Benzidine Orange R is a yellowish colored pigment that is used in solvent inks, aqueous inks, and aqueous coatings. It has a density value of 1.4 and a pH value of 7. This product has a color index number of Pigment Orange 16, a CAS number of 6505-28-8, a...展开 Benzidine Orange R is a yellowish colored pigment that is used in solvent inks, aqueous inks, and aqueous coatings. It has a density value of 1.4 and a pH value of 7. This product has a color index number of Pigment Orange 16, a CAS number of 6505-28-8, and an EU number of 229-388-1. 收起 | |
| Benzidine Yellow 121H | Emperor Pigment Co., Ltd. | Benzidine Yellow 121H is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used i...展开 Benzidine Yellow 121H is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in PA inks, NC inks, PP inks, and Toluene based inks. 收起 | |
| Benzidine Yellow DHG | Emperor Pigment Co., Ltd. | Benzidine Yellow DHG is a bright yellow colored pigment that is used in offset inks and textile printing. It has a density value of 1.5 and a pH value of 6.0 to 7.0. This product has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, an...展开 Benzidine Yellow DHG is a bright yellow colored pigment that is used in offset inks and textile printing. It has a density value of 1.5 and a pH value of 6.0 to 7.0. This product has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. 收起 | |
| Benzidine Yellow G | Emperor Pigment Co., Ltd. | Benzidine Yellow G is a pigment that is reddish yellow and transparent in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0,...展开 Benzidine Yellow G is a pigment that is reddish yellow and transparent in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in offset inks, waterbased inks, and textile printing. 收起 | |
| Benzidine Yellow G-A | Emperor Pigment Co., Ltd. | Benzidine Yellow G-A is a pigment that is reddish yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used i...展开 Benzidine Yellow G-A is a pigment that is reddish yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in offset inks, waterbased inks, and textile printing. 收起 | |
| Benzidine Yellow G-B | Emperor Pigment Co., Ltd. | Benzidine Yellow G-B is a greenish yellow and semitransparent colored pigment that is used in offset inks, waterbased inks, and textile printing. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. T...展开 Benzidine Yellow G-B is a greenish yellow and semitransparent colored pigment that is used in offset inks, waterbased inks, and textile printing. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5 and a pH value of 6.0 to 7.0. 收起 | |
| Benzimidazolone Orange | Emperor Pigment Co., Ltd. | Benzimidazolone Orange is a pigment that is orange in color. It has a color index number of Pigment Orange 64 and a CAS number of 72102-84-2. This product has a heat stability value of 250 degrees Celsius, an oil absorption value of 40 to 60 grams per 100...展开 Benzimidazolone Orange is a pigment that is orange in color. It has a color index number of Pigment Orange 64 and a CAS number of 72102-84-2. This product has a heat stability value of 250 degrees Celsius, an oil absorption value of 40 to 60 grams per 100 grams, and is used in paints and printing inks. 收起 | |
| Benzimidazolone Orange HL | Emperor Pigment Co., Ltd. | Benzimidazolone Orange HL is an orange colored pigment that is used in offset inks, solvent inks, aqueous inks, and paints. It has a color index number of Pigment Orange 36, a CAS number of 12236-62-3, and an EU number of 235-462-4. This product has a den...展开 Benzimidazolone Orange HL is an orange colored pigment that is used in offset inks, solvent inks, aqueous inks, and paints. It has a color index number of Pigment Orange 36, a CAS number of 12236-62-3, and an EU number of 235-462-4. This product has a density value of 1.4 and a pH value of 6.5. 收起 | |
| Benzyl Alcohol | Prakash Chemical Intl. Pvt. Ltd. | Benzyl Alcohol is a clear liquid that can be used as a solvent in marine paints, ball pen inks, paint stripper, lacquers and waterborne coating applications. This product has a moisture content of 0.10% and a specific gravity of 1.040 to 1.050 at 25°C. | |
| BLUESIL ADD 10086 | Elkem Silicones | BLUESIL ADD 10086 is a polydimethylsiloxane gum in solvent solution especially developed to obtain hammer effects in combination with thixotropic polyurethane bases. It is also suitable for use with classical, polyurethane bases, thixotropic alkyd paints ...展开 BLUESIL ADD 10086 is a polydimethylsiloxane gum in solvent solution especially developed to obtain hammer effects in combination with thixotropic polyurethane bases. It is also suitable for use with classical, polyurethane bases, thixotropic alkyd paints and silicone binders. 收起 | |
| BLUESIL ADD 11013 | Elkem Silicones | BLUESIL ADD 11013 is a polyether-modified polydimethylsiloxane for use in solventless paints and varnishes, and in water-based paints and inks. | |
| BLUESIL BP 9200 | Elkem Silicones | BLUESIL BP 9200 is a solventless alkylpolysiloxane oligomer designed to enhance durability of construction materials as formed hard adhesion repellency layer through deep penetration. | |
| BLUESIL BP 9300 | Elkem Silicones | BLUESIL BP 9300 is a solventless alkylpolysiloxane oligomer designed to enhance durability of construction materials as formed hard adhesion repellency layer through deep penetration. | |
| BLUESIL BP 9705 | Elkem Silicones | BLUESIL BP 9705 is a non ionic, APEO free, polyorganosiloxane aqueous emulsion, to be used as a water repellent additive in various formulations for building materials. | |
| BLUESIL BP 9710 | Elkem Silicones | BLUESIL BP 9710 is an emulsion with an alkylpolysiloxane oligomer base designed to protect surfaces against moisture. This waterproofing system respects the environment since it is entirely formulated in a water base, it is free of any organic solvent and...展开 BLUESIL BP 9710 is an emulsion with an alkylpolysiloxane oligomer base designed to protect surfaces against moisture. This waterproofing system respects the environment since it is entirely formulated in a water base, it is free of any organic solvent and it does not contain ecotoxic surfactant. After it has dried on the surface, BLUESIL BP 9710 repels water and allows walls to breathe. Experience acquired over more than 40 years shows that silicone water repellents are a good answer to humidity problems in construction materials, particularly when for esthetical reasons the natural aspect of the material should be preserved. BLUESIL BP 9710 has been awarded a test certificate by CSTC (Centre Scientifique et Technique de - ): ref HD-340/133-151 on the 2006.02.20. 收起 | |
| BLUESIL BP 9800 | Elkem Silicones | BLUESIL BP 9800 is an aqueous APE-free polymethylsiloxane resin emulsion. This emulsion is designed for use in facade coatings, to optimise the balance between water repellency and water vapour permeability. | |
| BLUESIL BP 9821 | Elkem Silicones | BLUESIL BP 9821 is an aqueous APE-free polymethylsiloxane resin emulsion with low VOC content. This emulsion is designed for use in facade coatings, to optimise the balance between water repellency and water vapour permeability. | |
| BLUESIL BP 9878 | Elkem Silicones | BLUESIL BP 9878 is an aqueous polymethylsiloxane resin emulsion.This emulsion provides two fundamental properties of the silicone technology to the paint film: water repellency and permeability to water vapour. | |
| BLUESIL BP 9900 | Elkem Silicones | BLUESIL BP 9900 is a non ionic, APEO free, polyorganosiloxane aqueous emulsion, to be used as a water repellent additive for building materials. | |
| BLUESIL BP 9920 | Elkem Silicones | BLUESIL BP 9920is anon-ionic, APEO free, polyorganosiloxane aqueous emulsion, to be used as a water repellent additive in various formulations for building materials. | |
| BLUESIL EMUL 1803 | Elkem Silicones | BLUESIL EMUL 1803 is a non-ionic silicone emulsion containing silicone oil and resin. This emulsion is intended for mould-release of cast polyurethane elastomers. | |
| BLUESIL EMUL 269 | Elkem Silicones | BLUESIL EMUL 269 is an aqueous emulsion of an hydrogeno polysiloxane. | |
| BLUESIL EMUL 284 | Elkem Silicones | BLUESIL EMUL 284 is a slightly ionic oil-in-water type emulsion of a high viscosity a/w-hydroxydimethylpolysiloxane fluid. BLUESIL EMUL 284 is characterised by its reactivity, its outstanding stability, its lubricating power and its fabric softening prop...展开 BLUESIL EMUL 284 is a slightly ionic oil-in-water type emulsion of a high viscosity a/w-hydroxydimethylpolysiloxane fluid. BLUESIL EMUL 284 is characterised by its reactivity, its outstanding stability, its lubricating power and its fabric softening properties (textile applications). 收起 | |
| BLUESIL EMUL 3500 | Elkem Silicones | BLUESIL EMUL 3500 is a general purpose; non-ionic oil in water silicone emulsion, of a high viscosity hydroxyl terminated polysiloxane. | |
| BLUESIL EMUL 35B | Elkem Silicones | BLUESIL EMUL 35B is an oil-in-water emulsion containing 35 % silicone oil, which is diluted for use, generally in a proportion of one part of BLUESIL EMUL 35B to 20 to 200 parts of water. Its characteristics are as follows:Practically no tendency to cream...展开 BLUESIL EMUL 35B is an oil-in-water emulsion containing 35 % silicone oil, which is diluted for use, generally in a proportion of one part of BLUESIL EMUL 35B to 20 to 200 parts of water. Its characteristics are as follows:Practically no tendency to cream, neither during storage nor in use.Perfect stability in contact with hard water or zinc (i.e. in galvanized metal containers).Excellent heat stability after dilution.Very good wetting power. 收起 | |
| BLUESIL EMUL 55 | Elkem Silicones | BLUESIL EMUL 55 is a non-ionic, silicone oil-based aqueous emulsion with 35 % active material. It is mainly used as a mould-stripping agent in foundries, and also has applications in the rubber and plastics industries. Moreover, it is one of the component...展开 BLUESIL EMUL 55 is a non-ionic, silicone oil-based aqueous emulsion with 35 % active material. It is mainly used as a mould-stripping agent in foundries, and also has applications in the rubber and plastics industries. Moreover, it is one of the component elements making up polishes and cleaners for artificial leather fabrics (PVC, PUR) and furniture polishes. 收起 | |
| BLUESIL EMUL 872 | Elkem Silicones | BLUESIL EMUL 872 is a slightly anionic aqueous emulsion with a 60% dry content, for general purposes. This is a concentrated version of BLUESIL EMUL E1P. | |
| BLUESIL EMUL E1P | Elkem Silicones | BLUESIL EMUL E1P is an oil in water emulsion containing 35 % of a silicone oil. It can be used in many industries. | |
| BLUESIL EMUL E1P U1 | Elkem Silicones | BLUESIL EMUL E1P U1 is a general purpose, non-ionic, aqueous silicone emulsion. | |
| BLUESIL EMULSION 2400 | Elkem Silicones | BLUESIL EMUL 2400 is a general purpose; non-ionic oil in water silicone emulsion of a methyl-hydrogen polysiloxane. | |
| BLUESIL FLD 21625 | Elkem Silicones | BLUESIL FLD 21625is anα/ω-epoxy functionalised polydimethylsiloxane fluid. | |
| BLUESIL FLD 45 | Elkem Silicones | BLUESIL FLD 45 is a low viscosity dimethylpolysiloxane oil used to prevent floating and flooding and improve leveling of air-drying paints. | |
| BLUESIL FLD 47V1 000 | Elkem Silicones | BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids. | |
| BLUESIL FLD 47V100 | Elkem Silicones | BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids. | |
| BLUESIL FLD 47V350 | Elkem Silicones | BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids. | |
| BLUESIL FLD 47V50 | Elkem Silicones | BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids. | |
| BLUESIL FLD 47V500 | Elkem Silicones | BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids. | |
| BLUESIL PI 2074 | Elkem Silicones | BLUESIL PI 2074 is a cationic photoinitiator for use with epoxy resins, vinyl ethers or any other type of oligomer which polymerises cationically. It is also suited to the formulation of hybrid radical / cationic systems. | |
| BLUESIL RES 6405 | Elkem Silicones | BLUESIL RES 6405 is a 50% solids methylphenylsilicone resin in Toluene (6405) or Xylene solution (6405X). This resin is ideal for the formulation of heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 6405X | Elkem Silicones | BLUESIL RES 6405X is a 50% solids methylphenylsilicone resin in Toluene (6405) or Xylene solution (6405X). This resin is ideal for the formulation of heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 6406XM | Elkem Silicones | BLUESIL RES 6406XM is a 60% solids methylphenylsilicone resin in Xylene solution. This resin is designed to formulate heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 6407 | Elkem Silicones | BLUESIL RES 6407 is a 70% solids methylphenylsilicone resin in Toluene solution. This resin is designed to formulate heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 6482X | Elkem Silicones | BLUESIL RES 6482X is a reactive silicone resin which was developed for use in the manufacture of decorative medium temperature paints. Currently this resin is mainly used for the manufacture of air drying, temperature resistant silicone alkyd paints. It i...展开 BLUESIL RES 6482X is a reactive silicone resin which was developed for use in the manufacture of decorative medium temperature paints. Currently this resin is mainly used for the manufacture of air drying, temperature resistant silicone alkyd paints. It is also more compatible than other silicones with urea-formaldehyde, melamine-formaldehyde, epoxy, polyurethane and acrylic resins. Another use is as an additive for epoxy paints. It also improves weathering resistance. 收起 | |
| BLUESIL SP 3300 | Elkem Silicones | BLUESIL SP 3300 is a non hydrolysable silicone polyether copolymer. | |
| BLUESIL SP 3300 | Elkem Silicones | BLUESIL SP 3300 is a non hydrolysable silicone polyether copolymer. | |
| BLUESIL SP 3303 | Elkem Silicones | BLUESIL SP 3303 is a polyether modified polysiloxane. | |
| BLUESIL SP 3303 | Elkem Silicones | BLUESIL SP 3303 is a polyether modified polysiloxane. | |
| BLUESIL SP 3307 | Elkem Silicones | BLUESIL SP 3307 is a polyether modified polysiloxane. | |
| BLUESIL SP 3307 | Elkem Silicones | BLUESIL SP 3307 is a polyether modified polysiloxane. | |
| BLUESIL SP 3309 | Elkem Silicones | BLUESIL SP 3309 is a polyether modified trisiloxane. | |
| BLUESIL TCS 7001 | Elkem Silicones | BLUESIL TCS 7001 is an alkyl polysiloxane solution in solvent phase specifically developed for the waterproofing of fabrics and leathers exposed to difficult weather conditions by spraying or impregnating. | |
| BRB Siloen® DA 290 | BRB International BV | BRB Siloen® DA 290 is solvent solution of a fluorosilicone fluid. It can be used as a silicone defoamer for solvent-free, solvent-borne, printing inks and ambient curing plastic system (epoxy and PU). | |
| BRB Siloen® LA 271 | BRB International BV | BRB Siloen® LA 271 is a glycol-modified silicone fluid. It is an additive for ink and coating applications, especially suitable for solvent and radiation curing with good substrate wetting. | |
| BRB Siloen® PDA 222 | BRB International BV | BRB Siloen® PDA 222 is an alkyl modified siloxane. It can be used as a dispersant processing aid for pigments, fillers and additives used in paints or plastic applications. | |
| BRB Siloen® SMA 280 | BRB International BV | BRB Siloen® SMA 280 is a 50% Polyether-modified siloxane solution in Di-propylene Glycol Methylether. It is a silicone additive for waterborne and solvent coatings with excellent slip and smoothness. | |
| BRB Siloen® SMA 283 | BRB International BV | BRB Siloen® SMA 283 is a Polyether-modified siloxane. It can be used as a silicone additive for waterborne and solvent coatings with excellent slip, smoothness and anti-crater effect. | |
| BRB Siloen® SMA 284 | BRB International BV | BRB Siloen® SMA 284 is an 80% active dispersion of a high molecular weight silicone gum. It can be used as a silicone additive for waterborne and solvent coatings providing excellent slip, mar resistance, gloss and anti-blocking effect. | |
| BRB Siloen® SMA 285 | BRB International BV | BRB Siloen® SMA 285 is a 30% active emulsion of a high molecular weight silicone urethane resin. It can be used as a silicone additive for water-based coatings. | |
| BRB Siloen® SMA 286 | BRB International BV | BRB Siloen® SMA 286 is a 100% active cross-linkable silicone acrylate pre-polymer. It is a silicone additive, especially designed for radiation cure coatings such as overprint varnishes for packaging, inks, coating with release properties and wood coating...展开 BRB Siloen® SMA 286 is a 100% active cross-linkable silicone acrylate pre-polymer. It is a silicone additive, especially designed for radiation cure coatings such as overprint varnishes for packaging, inks, coating with release properties and wood coatings. It can also act as an intermediate for polymers modification. 收起 | |
| BRB Siloen® SR 313 | BRB International BV | BRB Siloen® SR 313 is a medium hard methyl phenyl silicone resin for heat resistant paints. It can be used as a binder for heat resistant and anti-corrosive paints. | |
| BRB Siloen® SR 379 | BRB International BV | BRB Siloen® SR 379 is a hard methyl silicone resin 50% active in organic solvents. It can be used as a binder for heat resistant and anti-corrosive paints. | |
| BRB Siloen® SR 379N | BRB International BV | BRB Siloen® SR 379N is a medium hard methyl silicone resin; when dried at room temperature, it is a bit softer than BRB Siloen® SR 379 and has some more tacky residue. After baking, hardness is practically equivalent. It can be used as a binder for heat r...展开 BRB Siloen® SR 379N is a medium hard methyl silicone resin; when dried at room temperature, it is a bit softer than BRB Siloen® SR 379 and has some more tacky residue. After baking, hardness is practically equivalent. It can be used as a binder for heat resistant and anti-corrosive paints. 收起 | |
| BRB Siloen® SR 383 | BRB International BV | BRB Siloen® SR 383 is a medium hard methyl phenyl silicone resin for heat resistant paints. It can be used as a binder for heat resistant and anti-corrosive paints. | |
| BRB Siloen® SR 385 FD | BRB International BV | BRB Siloen® SR 385 FD is a medium hardness Methyl-Phenyl resin supplied at 50 % solid in Xilene, designed to produce non-stick coating materials in contact with foodstuff. It can be used in non-sticking bakery pans for bread, rusks, biscuits, cakes, etc.,...展开 BRB Siloen® SR 385 FD is a medium hardness Methyl-Phenyl resin supplied at 50 % solid in Xilene, designed to produce non-stick coating materials in contact with foodstuff. It can be used in non-sticking bakery pans for bread, rusks, biscuits, cakes, etc., as well as non-stick coatings for toaster, grills, BBQs, etc. 收起 | |
| BRB Siloen® SR 833 | BRB International BV | BRB Siloen® SR 833 is a solventless, solvent thinnable alkoxy methyl silicone oligomer. It is suitable as ambient moisture cure binder for the manufacture of heat resistant coatings. In combination with suitable catalyst, pigments and fillers, can be used...展开 BRB Siloen® SR 833 is a solventless, solvent thinnable alkoxy methyl silicone oligomer. It is suitable as ambient moisture cure binder for the manufacture of heat resistant coatings. In combination with suitable catalyst, pigments and fillers, can be used for ambient curing heat resistant paint. (Automotive parts, industrial coatings, ovens, stoves and barbecues). 收起 | |
| BRB Siloen® TA 394 | BRB International BV | BRB Siloen® TA 394 is a solvent based high molecular weight polydimethylsiloxane formulation, designed as a hammertone finish additive. It provides a hammertone finish effect to paints and coatings. | |
| BRB Siloen® WA 261 | BRB International BV | BRB Siloen® WA 261 is a modified trisiloxane that provides outstanding surface tension reduction and super spreading properties. It is a surface wetting additive for coatings and inks. | |
| BRB Siloen® WA 264 | BRB International BV | BRB Siloen® WA 264 is a polyether-modified siloxane. It is a silicone surfactant for aqueous coatings with excellent wetting and levelling properties. | |
| BRB Siloen® WA 265 | BRB International BV | BRB Siloen® WA 265 is an organo-modified trisiloxane. It provides outstanding surface tension reduction and super spreading properties to any aqueous solution. It is a silicone wetting agent for waterborne and radiation curable coating, inks and overprint...展开 BRB Siloen® WA 265 is an organo-modified trisiloxane. It provides outstanding surface tension reduction and super spreading properties to any aqueous solution. It is a silicone wetting agent for waterborne and radiation curable coating, inks and overprint varnishes. 收起 | |
| CAF 2534 | Elkem Silicones | CAF 2534 is a one component silicone rubber that cures when in contact with air humidity. It is intended for use as a formulation base for the development of tie-coats in the fouling release treatment of boat hulls. | |
| Calcium Octoate CA-10 | Prakash Chemical Intl. Pvt. Ltd. | Calcium Octoate CA-10 is a pale yellow liquid that has a low viscosity and functions as an auxiliary drier. This product is primarily used in combination with Lead and Cobalt Octoate in alkyd finishes. When combined with Cobalt, it will increase the effic...展开 Calcium Octoate CA-10 is a pale yellow liquid that has a low viscosity and functions as an auxiliary drier. This product is primarily used in combination with Lead and Cobalt Octoate in alkyd finishes. When combined with Cobalt, it will increase the efficiency of Cobalt drier in the paint medium. This particular grade has a metal content of 10% (± 0.2) and a specific gravity of 0.98 at 300°C (± 0.03). 收起 | |
| Calcium Octoate CA-3 | Prakash Chemical Intl. Pvt. Ltd. | Calcium Octoate CA-3 is a pale yellow liquid that has a low viscosity and functions as an auxiliary drier. This product is primarily used in combination with Lead and Cobalt Octoate in alkyd finishes. When combined with Cobalt, it will increase the effici...展开 Calcium Octoate CA-3 is a pale yellow liquid that has a low viscosity and functions as an auxiliary drier. This product is primarily used in combination with Lead and Cobalt Octoate in alkyd finishes. When combined with Cobalt, it will increase the efficiency of Cobalt drier in the paint medium. This particular grade has a metal content of 3% (± 0.2) and a specific gravity of 0.84 at 300°C (± 0.03). 收起 | |
| Calcium Octoate CA-5 | Prakash Chemical Intl. Pvt. Ltd. | Calcium Octoate CA-5 is a pale yellow liquid that has a low viscosity and functions as an auxiliary drier. This product is primarily used in combination with Lead and Cobalt Octoate in alkyd finishes. When combined with Cobalt, it will increase the effici...展开 Calcium Octoate CA-5 is a pale yellow liquid that has a low viscosity and functions as an auxiliary drier. This product is primarily used in combination with Lead and Cobalt Octoate in alkyd finishes. When combined with Cobalt, it will increase the efficiency of Cobalt drier in the paint medium. This particular grade has a metal content of 5% (± 0.2) and a specific gravity of 0.9 at 300°C (± 0.03). 收起 | |
| Cardanol | Prakash Chemical Intl. Pvt. Ltd. | Cardanol is a pale straw yellow liquid that is used in epoxy primers for industrial and marine paints and coatings. This product can be utilized as a compatibalizer in Polysiloxane modified epoxy coatings. It has a specific gravity of 0.927-0.934 at 30°C ...展开 Cardanol is a pale straw yellow liquid that is used in epoxy primers for industrial and marine paints and coatings. This product can be utilized as a compatibalizer in Polysiloxane modified epoxy coatings. It has a specific gravity of 0.927-0.934 at 30°C and a hydroxyl value of 180-200. 收起 | |
| CCR 110 | CINKARNA | CCR is an ultrafine, nanoparticle version of a rutile titanium dioxide pigment. This product has been surface modified. It can be used in transparent UV coatings for various substrates. | |
| CCR 130 | CINKARNA | CCR 130 is an ultrafine, nanoparticle version of a rutile titanium dioxide pigment. This product has been surface modified. It can be used in transparent UV coatings for various substrates. | |
| CCR 150 | CINKARNA | CCR 150 is an ultrafine, nanoparticle version of a rutile titanium dioxide pigment. This product has been surface-modified. It can be used in transparent UV coatings for various substrates. | |
| CF1-135 | NuSil Silicone Technology 1 | CF1-135 is high technology translucent silicone primer that is specifically formulated for use with platinum cured systems where conventional primers are insufficient. This product can help improve the adhesion of addition-cured systems to different subst...展开 CF1-135 is high technology translucent silicone primer that is specifically formulated for use with platinum cured systems where conventional primers are insufficient. This product can help improve the adhesion of addition-cured systems to different substrates such as metals, ceramics, glass, some plastics and other silicone material. It is a one-component primer that is supplied in VM&P Napththa and it requires no mixing. 收起 | |
| CF1-141 | NuSil Silicone Technology 1 | CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air...展开 CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air dries. This primer improves adhesion of addition-cured systems to various substrates such as glass, metals, plastics, ceramics and other silicone materials. 收起 | |
| CF1-3510 | NuSil Silicone Technology 1 | CF1-3510 is a fluorosilicone potting and encapsulating elastomer that cures with the addition of heat. It is best used for applications that require solvent resistance and for molding parts such as stoppers, o-rings, and seals. This product can also be us...展开 CF1-3510 is a fluorosilicone potting and encapsulating elastomer that cures with the addition of heat. It is best used for applications that require solvent resistance and for molding parts such as stoppers, o-rings, and seals. This product can also be used as an encapsulating, potting and sealing material and it is best used in applications requiring an operating temperature range of -65°C to 240°C (-85°F to 465°F). 收起 | |
| CF1-3710-2 | NuSil Silicone Technology 1 | CF1-3710-2 is a fluorosilicone foam that has a 1:1 ratio with a white Part A and gray Part B for easy identification and mixing. This product cures very quickly at room temperature to an elastomeric foam. It can be used as a solvent resistant seal or in s...展开 CF1-3710-2 is a fluorosilicone foam that has a 1:1 ratio with a white Part A and gray Part B for easy identification and mixing. This product cures very quickly at room temperature to an elastomeric foam. It can be used as a solvent resistant seal or in shock and vibration dampening situations that require a flexible, light weight foam with exceptional radiation resistance and thermal insulation. This foam is especially useful where stability at higher and lower temperatures is required. 收起 | |
| CF1-3800 | NuSil Silicone Technology 1 | CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This pr...展开 CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This product can also be utilized as an adhesive, sealant or molding material when solvent resistance is needed. It can provide the transfer of heat between electrical components and heat sinks, and can operate at a temperature range of -65°C to 225°C (-85°F to 437°F). 收起 | |
| CF19-2186 | NuSil Silicone Technology 1 | CF19-2186 is a general purpose silicone elastomer that has a medium cure rate and is provided in mix and dispense applicators. This product can provide protection for assemblies and electronic components against, vibration, shock, ozone, moisture, dust an...展开 CF19-2186 is a general purpose silicone elastomer that has a medium cure rate and is provided in mix and dispense applicators. This product can provide protection for assemblies and electronic components against, vibration, shock, ozone, moisture, dust and other contaminants. It can also be utilized as an encapsulating or potting material, and can replicate surfaces and devices. 收起 | |
| CF19-2615 | NuSil Silicone Technology 1 | CF19-2615 is a two-part, silicone elastomer that is optically clear and solvent free. It cures at room temperature or rapidly with the addition of heat. This product can be use for photonics applications such as photo detectors, HBLEDs, lasers, flat panel...展开 CF19-2615 is a two-part, silicone elastomer that is optically clear and solvent free. It cures at room temperature or rapidly with the addition of heat. This product can be use for photonics applications such as photo detectors, HBLEDs, lasers, flat panel displays and discrete optics that require a 1.41 refractive index. It can also provide protection to electronic components and assemblies against vibration, shock, moisture, dust and other environmental hazards. 收起 | |
| CF2-135 | NuSil Silicone Technology 1 | CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as woo...展开 CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as wood, metals, ceramics, plastics, and other silicone materials. For the best bonding results, be sure that the surface being primed is clean and degreased. 收起 | |
| CF2-3521 | NuSil Silicone Technology 1 | CF2-3521 is a translucent fluorosilicone elastomer that cures rapidly with heat from an oven or heating lamp, or at room temperature. It can be utilized in applications that would require a good solvent resistance. This product is especially useful for mo...展开 CF2-3521 is a translucent fluorosilicone elastomer that cures rapidly with heat from an oven or heating lamp, or at room temperature. It can be utilized in applications that would require a good solvent resistance. This product is especially useful for molding parts such as O-rings, stoppers, and seals. 收起 | |
| CF2-3521-2 | NuSil Silicone Technology 1 | CF2-3521-2 is a two part, black, 50 mole % fluorosilicone elastomer that cures at room temperature, or rapidly with heat from a heating lamp or oven. This product can be especially useful for molding parts such as stoppers, seals, and O-rings. It can also...展开 CF2-3521-2 is a two part, black, 50 mole % fluorosilicone elastomer that cures at room temperature, or rapidly with heat from a heating lamp or oven. This product can be especially useful for molding parts such as stoppers, seals, and O-rings. It can also be used in applications that would require a solvent resistance. 收起 | |
| CF3-3521 | NuSil Silicone Technology 1 | CF3-3521 is a fluorosilicone elastomer that can be used with with liquid injection molding equipment. It is an exceptional product to use for molding high quality parts such as gaskets, seals and o-rings. It is also ideal for applications that require a m...展开 CF3-3521 is a fluorosilicone elastomer that can be used with with liquid injection molding equipment. It is an exceptional product to use for molding high quality parts such as gaskets, seals and o-rings. It is also ideal for applications that require a medium hardness silicone and solvent resistance. This product is best utilized in applications that require an operating temperature range of -65 to 240°C (-85 to 465°F). 收起 | |
| CF5-3521-2 | NuSil Silicone Technology 1 | CF5-3521-2 is a two part, 50 mole % fluorosilicone that has a 1:1 Mix Ratio (Part A:B). It can be cured at room temperature, or more rapidly by heating it in an oven or with a heating lamp. The product is especially useful as a coating, sealant, adhesive ...展开 CF5-3521-2 is a two part, 50 mole % fluorosilicone that has a 1:1 Mix Ratio (Part A:B). It can be cured at room temperature, or more rapidly by heating it in an oven or with a heating lamp. The product is especially useful as a coating, sealant, adhesive or molding material in applications that require solvent resistance. 收起 | |
| CF6-135 | NuSil Silicone Technology 1 | CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product wil...展开 CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product will improve the adhesion of addition-cured systems to many different substrates such as glass, metals, plastics, ceramics and other silicone material. 收起 | |
| Cobalt Octoate CO-10 | Prakash Chemical Intl. Pvt. Ltd. | Cobalt Octoate CO-10 is a bluish violet liquid that has a low viscosity and functions as the most active surface drier. It is primarily used in conjunction with auxiliary driers, and will increase the ability to dry rapidly. This particular grade has a m...展开 Cobalt Octoate CO-10 is a bluish violet liquid that has a low viscosity and functions as the most active surface drier. It is primarily used in conjunction with auxiliary driers, and will increase the ability to dry rapidly. This particular grade has a metal content of 10% (± 0.2) and a specific gravity of 0.97 at 300°C (± 0.03). 收起 | |
| Cobalt Octoate CO-12 | Prakash Chemical Intl. Pvt. Ltd. | Cobalt Octoate CO-12 is a bluish violet liquid that has a low viscosity and functions as the most active surface drier. It is primarily used in conjunction with auxiliary driers, and will increase the ability to dry rapidly. This particular grade has a me...展开 Cobalt Octoate CO-12 is a bluish violet liquid that has a low viscosity and functions as the most active surface drier. It is primarily used in conjunction with auxiliary driers, and will increase the ability to dry rapidly. This particular grade has a metal content of 12% (± 0.2) and a specific gravity of 1.02 at 300°C (± 0.03). 收起 | |
| Cobalt Octoate CO-3 | Prakash Chemical Intl. Pvt. Ltd. | Cobalt Octoate CO-3 is a bluish violet liquid that has a low viscosity and functions as the most active surface drier. It is primarily used in conjunction with auxiliary driers, and will increase the ability to dry rapidly. This particular grade has a met...展开 Cobalt Octoate CO-3 is a bluish violet liquid that has a low viscosity and functions as the most active surface drier. It is primarily used in conjunction with auxiliary driers, and will increase the ability to dry rapidly. This particular grade has a metal content of 3% (± 0.2) and a specific gravity of 0.82 at 300°C (± 0.03). 收起 | |
| Cobalt Octoate CO-6 | Prakash Chemical Intl. Pvt. Ltd. | Cobalt Octoate CO-6 is a bluish violet liquid that has a low viscosity and functions as the most active surface drier. It is primarily used in conjunction with auxiliary driers, and will increase the ability to dry rapidly. This particular grade has a met...展开 Cobalt Octoate CO-6 is a bluish violet liquid that has a low viscosity and functions as the most active surface drier. It is primarily used in conjunction with auxiliary driers, and will increase the ability to dry rapidly. This particular grade has a metal content of 6% (± 0.2) and a specific gravity of 0.88 at 300°C (± 0.03). 收起 | |
| Cobalt Octoate CO-8 | Prakash Chemical Intl. Pvt. Ltd. | Cobalt Octoate CO-8 is a bluish violet liquid that has a low viscosity and functions as the most active surface drier. It is primarily used in conjunction with auxiliary driers, and will increase the ability to dry rapidly. This particular grade has a met...展开 Cobalt Octoate CO-8 is a bluish violet liquid that has a low viscosity and functions as the most active surface drier. It is primarily used in conjunction with auxiliary driers, and will increase the ability to dry rapidly. This particular grade has a metal content of 8% (± 0.2) and a specific gravity of 0.93 at 300°C (± 0.03). 收起 | |
| Copper Octoate CU-8 | Prakash Chemical Intl. Pvt. Ltd. | Copper Octoate CU-8 is a dark green substance that is often used in unsaturated polyester resins to improve its functionality. This product can be utilized in marine paints because it has excellent fungicidal and anti-fouling properties. It can also be us...展开 Copper Octoate CU-8 is a dark green substance that is often used in unsaturated polyester resins to improve its functionality. This product can be utilized in marine paints because it has excellent fungicidal and anti-fouling properties. It can also be used in wood protective lacquers to prevent mildew growth and rotting. 收起 | |
| CV-1142 | NuSil Silicone Technology 1 | CV-1142 is a non corrosive that has controlled volatility, RTV silicone adhesive/sealant.. It is best used as a sealing, caulking, adhesive or potting material in applications that require little outgassing. This helps to avoid condensation in sensitive d...展开 CV-1142 is a non corrosive that has controlled volatility, RTV silicone adhesive/sealant.. It is best used as a sealing, caulking, adhesive or potting material in applications that require little outgassing. This helps to avoid condensation in sensitive devices. Furthermore, it is also best used for applications requiring extremely low temperatures. 收起 | |
| CV-1143 | NuSil Silicone Technology 1 | CV-1143 is a silicone adhesive/sealant that is best used in applications that require low outgassing and minimal volatile condensables under extreme operating conditions. It is also used as a bond and sealant in applications such as overhead or vertical j...展开 CV-1143 is a silicone adhesive/sealant that is best used in applications that require low outgassing and minimal volatile condensables under extreme operating conditions. It is also used as a bond and sealant in applications such as overhead or vertical joints that require a non-slumping, and one-part materials. 收起 | |
| CV-1144-0 | NuSil Silicone Technology 1 | CV-1144-0 is an oxygen protective silicone overcoat that is used for applications where extremely low temperatures and low outgassing are a hazard. It functions as a protective overcoating for electric components and atomic oxygen resistance in space appl...展开 CV-1144-0 is an oxygen protective silicone overcoat that is used for applications where extremely low temperatures and low outgassing are a hazard. It functions as a protective overcoating for electric components and atomic oxygen resistance in space applications. This product also has a broad operating temperature range and can provide radiation and thermal stress resistance. 收起 | |
| CV-1146-2 | NuSil Silicone Technology 1 | CV-1146-2 is a one part, flat black silicone dispersion that meets outgas specifications outlined in NASA and the European Space Agency. It is an ideal product to use in space and electrical applications that require low outgassing under extreme operating...展开 CV-1146-2 is a one part, flat black silicone dispersion that meets outgas specifications outlined in NASA and the European Space Agency. It is an ideal product to use in space and electrical applications that require low outgassing under extreme operating conditions. It also provides an atomic oxygen protection and resistance to radiation and thermal stress. 收起 |
