| CV1-1142-4 | NuSil Silicone Technology 1 | CV1-1142-4 is one-part, translucent, self-leveling RTV silicone that has a high extrusion rate. It is best used as a sealing, caulking, adhesive or potting material in applications that require little outgassing. This helps to avoid condensation in sensit...展开 CV1-1142-4 is one-part, translucent, self-leveling RTV silicone that has a high extrusion rate. It is best used as a sealing, caulking, adhesive or potting material in applications that require little outgassing. This helps to avoid condensation in sensitive devices. The product also has a built in UV tracer and it can be used for applications that require a broad operating temperature range. 收起 | |
| CV1-1144-0 | NuSil Silicone Technology 1 | CV1-1144-0 is a one-part silicone dispersion that functions as a protective overcoating for atomic oxygen resistance in space applications. Due to its non-corrosive nature, it is ideal for coating electronic components and provides resistance against radi...展开 CV1-1144-0 is a one-part silicone dispersion that functions as a protective overcoating for atomic oxygen resistance in space applications. Due to its non-corrosive nature, it is ideal for coating electronic components and provides resistance against radiation and thermal stress. This product meets the lo outgas specifications outlined in NASA and the European Space Agency. 收起 | |
| CV1-1148 | NuSil Silicone Technology 1 | CV1-1148 is a one-part black silicone dispersion that can be used for applications that require minimal volatile condensables under extreme operating conditions. This product can also provide atomic oxygen and electrostatic discharge protection. It is sui...展开 CV1-1148 is a one-part black silicone dispersion that can be used for applications that require minimal volatile condensables under extreme operating conditions. This product can also provide atomic oxygen and electrostatic discharge protection. It is suitable to use in applications that require a broad operating temperature range. 收起 | |
| CV1-2289-1 | NuSil Silicone Technology 1 | CV1-2289-1 is a potting and encapsulating silicone elastomer that has a 1:1 Mix Ratio (Part A:B). This product is ideal for use in potting connectors, cable harness breakouts, molded high-voltage terminals, gaskets and seals due to its high tear strength....展开 CV1-2289-1 is a potting and encapsulating silicone elastomer that has a 1:1 Mix Ratio (Part A:B). This product is ideal for use in potting connectors, cable harness breakouts, molded high-voltage terminals, gaskets and seals due to its high tear strength. It can provide protection for electronic components against shock, vibration, dust, chemicals, moisture and other environmental hazards. It can also be used in applications that require low outgassing under extreme operating conditions. 收起 | |
| CV1-2566 | NuSil Silicone Technology 1 | CV1-2566 is a red RTV silicone that can be used as an adhesive to help control high vacuum environments in electronic and space applications. This product can also withstand hazards such as extreme high or low temperatures. If an application requires low ...展开 CV1-2566 is a red RTV silicone that can be used as an adhesive to help control high vacuum environments in electronic and space applications. This product can also withstand hazards such as extreme high or low temperatures. If an application requires low outgassing this is the ideal sealant for the job. 收起 | |
| CV1-2640 | NuSil Silicone Technology 1 | CV1-2640 is an electrically conductive RTV silicone that can be used to adhere covers onto housings or any application where grooves and other configurations require a non flowable material. It can also be utilized as a shield for EMI and RFI in space and...展开 CV1-2640 is an electrically conductive RTV silicone that can be used to adhere covers onto housings or any application where grooves and other configurations require a non flowable material. It can also be utilized as a shield for EMI and RFI in space and electrical applications. Another function of this product is to protect sensitive devices from condensation. 收起 | |
| CV1-2960 | NuSil Silicone Technology 1 | CV1-2960 is a thermally conductive silicone that can be used to adhere base plates, integrated circuit substrates, and heat sinks or other configurations that require a flowable to limited flow material. This product is also suitable for applications that...展开 CV1-2960 is a thermally conductive silicone that can be used to adhere base plates, integrated circuit substrates, and heat sinks or other configurations that require a flowable to limited flow material. This product is also suitable for applications that require low outgassing under extreme operating conditions. It is able to provide heat transfer between electronic components and their heat sinks. 收起 | |
| CV1-2964 | NuSil Silicone Technology 1 | CV1-2964 is a silicone elastomer the has controlled volatility and can be used to transfer heat between heat sinks and electrical/electronic components. It can also be utilized for applications requiring low outgassing under extreme operating conditions. ...展开 CV1-2964 is a silicone elastomer the has controlled volatility and can be used to transfer heat between heat sinks and electrical/electronic components. It can also be utilized for applications requiring low outgassing under extreme operating conditions. This product may be used as an adhesive for integrated circuit substrates, base plates, heat sinks or where grooves require a limited flow material. 收起 | |
| CV1-8151 | NuSil Silicone Technology 1 | CV1-8151 is a two-part, clear silicone gel that has a controlled volatility. It can be used for applications that require low outgassing under extreme operating conditions. This product can also be utilized as an embedding or potting compound for environm...展开 CV1-8151 is a two-part, clear silicone gel that has a controlled volatility. It can be used for applications that require low outgassing under extreme operating conditions. This product can also be utilized as an embedding or potting compound for environmental protection of electronic components in space applications. 收起 | |
| CV10-2568 | NuSil Silicone Technology 1 | CV10-2568 is a two part RTV ablative silicone that can be used as a bonding, sealing, or potting material in electronic and space applications. This product will provide radiation resistance, low thermal conductivity, oxidation stability and thermal stabi...展开 CV10-2568 is a two part RTV ablative silicone that can be used as a bonding, sealing, or potting material in electronic and space applications. This product will provide radiation resistance, low thermal conductivity, oxidation stability and thermal stability. It can also be especially useful to bond solar cells to solar array panels as it has a broad operating temperature range. 收起 | |
| CV14-2500 | NuSil Silicone Technology 1 | CV14-2500 is a controlled volatility silicone system that incorporates an adhesion promoter and has a low viscosity. It can serve as a potting or embedding compound for electronic components to provide protection from extreme, radiation, humidity, mechani...展开 CV14-2500 is a controlled volatility silicone system that incorporates an adhesion promoter and has a low viscosity. It can serve as a potting or embedding compound for electronic components to provide protection from extreme, radiation, humidity, mechanical and thermal stress. This product can also be used to adhere covers onto housings, or any applications where grooves require a material that has superior flow. 收起 | |
| CV16-2500 | NuSil Silicone Technology 1 | CV16-2500 is a silicone elastomer that is designed for enhanced performance in extreme low and high temperatures. It can protect electronic components from environmental hazards such as humidity and radiation. This product is ideal for applications that ...展开 CV16-2500 is a silicone elastomer that is designed for enhanced performance in extreme low and high temperatures. It can protect electronic components from environmental hazards such as humidity and radiation. This product is ideal for applications that require super flow because of its low viscosity. 收起 | |
| CV2-1147 | NuSil Silicone Technology 1 | CV2-1147 is a silicone atomic oxygen protective coating that can be used in applications that require a broad operating temperature range. This coating will help protect electrical components from radiation and thermal stress. This product is also suitabl...展开 CV2-1147 is a silicone atomic oxygen protective coating that can be used in applications that require a broad operating temperature range. This coating will help protect electrical components from radiation and thermal stress. This product is also suitable to use in applications that require low outgassing in extreme operating conditions. 收起 | |
| CV2-1148 | NuSil Silicone Technology 1 | CV2-1148 is a black silicone oxygen protective coating that can be used for bonding applications where a non-slumping and one-part material is required. This product can also provide excellent joint coverage and thin section encapsulation. It is ideal for...展开 CV2-1148 is a black silicone oxygen protective coating that can be used for bonding applications where a non-slumping and one-part material is required. This product can also provide excellent joint coverage and thin section encapsulation. It is ideal for applications that require minimal volatile condensables under extreme operating conditions. 收起 | |
| CV2-2289-1 | NuSil Silicone Technology 1 | CV2-2289-1 is encapsulating silicone elastomer that offers medium strength, low modulus, and a broad operating temperature range. It is an ideal adhesive application where large surface areas must be covered. It also provides protection for electrical com...展开 CV2-2289-1 is encapsulating silicone elastomer that offers medium strength, low modulus, and a broad operating temperature range. It is an ideal adhesive application where large surface areas must be covered. It also provides protection for electrical components against shock, vibration, moisture, dust, chemicals and other environmental hazards. 收起 | |
| CV2-2566 | NuSil Silicone Technology 1 | CV2-2566 is a two-part, thixotropic red RTV silicone that can be used as a potting material, sealant, caulking, or adhesive in space and electronic applications where a high vacuum environment is encountered. This is a versatile product because in can fun...展开 CV2-2566 is a two-part, thixotropic red RTV silicone that can be used as a potting material, sealant, caulking, or adhesive in space and electronic applications where a high vacuum environment is encountered. This is a versatile product because in can function within a broad operating temperature range. It can also be used to bond solar cells to solar array panels. 收起 | |
| CV2-2640 | NuSil Silicone Technology 1 | CV2-2640 is a static dissipative RTV silicone that can be used to protect electrical components and sensitive devices from condensation building up. This product can also be used for EMI and RFI shielding in electronic and space applications. It is a non-...展开 CV2-2640 is a static dissipative RTV silicone that can be used to protect electrical components and sensitive devices from condensation building up. This product can also be used for EMI and RFI shielding in electronic and space applications. It is a non-flowing material so it can be used to adhere covers onto housings. 收起 | |
| CV2-2646 | NuSil Silicone Technology 1 | CV2-2646 is an electrically conductive RTV silicone that is used for RFI and EMI shielding in electronic and space applications. This product is able to maintain electric conductivity over a broad operating temperature range. It is well suited for formed-...展开 CV2-2646 is an electrically conductive RTV silicone that is used for RFI and EMI shielding in electronic and space applications. This product is able to maintain electric conductivity over a broad operating temperature range. It is well suited for formed-in-place conductive gaskets and designed for enhanced performance in extreme low and high temperatures. 收起 | |
| CV2-2946 | NuSil Silicone Technology 1 | CV2-2946 is a volatility controlled silicone that cures with the addition of heat and is desgned to allow bond line thickness of <=50 Microns. It can be used to adhere integrated circuit substrates, base plates, heat sinks or where a non-flowable material...展开 CV2-2946 is a volatility controlled silicone that cures with the addition of heat and is desgned to allow bond line thickness of <=50 Microns. It can be used to adhere integrated circuit substrates, base plates, heat sinks or where a non-flowable material is required. This product also has the ability to provide heat transfer between electrical/electronic component and their heat sinks. 收起 | |
| CV3-1142 | NuSil Silicone Technology 1 | CV3-1142 is a one-part translucent material that is also a non-slumping silicone RTV. It is best used as a sealant, caulk, adhesive or potting material in electrical and space applications that require low outgassing, and minimal volatile condensables und...展开 CV3-1142 is a one-part translucent material that is also a non-slumping silicone RTV. It is best used as a sealant, caulk, adhesive or potting material in electrical and space applications that require low outgassing, and minimal volatile condensables under extreme operating conditions. This product also provides corrosion protection for sensitive circuits such as connectors, switches and other electrical components. It can also be utilized in bonding and sealing applications that require a non-slumping material. 收起 | |
| CV3-1144-1 | NuSil Silicone Technology 1 | CV3-1144-1 is a white silicone dispersion that has a non-corrosive cure which makes it an ideal coating for electronics components. This product can be utilized as a protective overcoating for atomic oxygen resistance in space applications. It also provid...展开 CV3-1144-1 is a white silicone dispersion that has a non-corrosive cure which makes it an ideal coating for electronics components. This product can be utilized as a protective overcoating for atomic oxygen resistance in space applications. It also provides protection from thermal stress and radiation. 收起 | |
| CV4-1161-5 | NuSil Silicone Technology 1 | CV4-1161-5 is a one-part, double-sided pressure sensitive adhesive tape that is best used to adhere and bond metals, paper, glass, fabric, organic rubbers, synthetics and films. It has the ability to collect dust in and around sensitive electronic compone...展开 CV4-1161-5 is a one-part, double-sided pressure sensitive adhesive tape that is best used to adhere and bond metals, paper, glass, fabric, organic rubbers, synthetics and films. It has the ability to collect dust in and around sensitive electronic components and is designed to withstand extreme temperature/pressure variations. 收起 | |
| CV7-2289-1 | NuSil Silicone Technology 1 | CV7-2289-1 is an encapsulating silicone elastomer that is best used for applications that require low outgassing and minimal volatile condensables under extreme operating conditions. In these extreme conditions this product will help protect electrical sy...展开 CV7-2289-1 is an encapsulating silicone elastomer that is best used for applications that require low outgassing and minimal volatile condensables under extreme operating conditions. In these extreme conditions this product will help protect electrical systems against environmental hazards such as vibration, shock, dust and chemicals. 收起 | |
| DENSIPOL DF 152 | Chemipol | DENSIPOL DF 152 is an antifoaming agent based on an alkylene oxide copolymer on fatty alcohol. Effective throughout a wide range of pH, salinity, and temperature. Highly effective controlling the foaming generation process in urban and industrial wastewat...展开 DENSIPOL DF 152 is an antifoaming agent based on an alkylene oxide copolymer on fatty alcohol. Effective throughout a wide range of pH, salinity, and temperature. Highly effective controlling the foaming generation process in urban and industrial wastewater plants and other water-based systems. 收起 | Request Sample |
| DENSIPOL DF 155 | Chemipol | DENSIPOL DF 155 is an antifoaming agent based on ethylene oxide copolymers on lineal alcohol. Cost-effective, free of silicone antifoaming agent. Effective throughout a wide range of pH and temperatures. Highly effective in controlling the foaming generat...展开 DENSIPOL DF 155 is an antifoaming agent based on ethylene oxide copolymers on lineal alcohol. Cost-effective, free of silicone antifoaming agent. Effective throughout a wide range of pH and temperatures. Highly effective in controlling the foaming generation process during the manufacturing, handling, and storage processes of paints and aqueous glues. To obtain full antifoaming protection, it is recommended to combine the product with a defoamer such as DENSIPOL DF 800. 收起 | Request Sample |
| DENSIPOL DF 156 | Chemipol | DENSIPOL DF 156 is an antifoaming agent for waterborne technical products, specifically designed to be used as an antifoaming agent for cement slurries. Silicone free. As it is based on copolymers, its effective throughout a wide range of pH and tempera...展开 DENSIPOL DF 156 is an antifoaming agent for waterborne technical products, specifically designed to be used as an antifoaming agent for cement slurries. Silicone free. As it is based on copolymers, its effective throughout a wide range of pH and temperature. Highly effective in controlling the foaming generation process during manufacturing, handling, and storage processes of paints and aqueous glues. Appropriate for products based on different resins, such as acrylic-styrene, pure acrylic, alkydic, butadiene-styrene, and polyvinyl acetate. 收起 | Request Sample |
| DENSIPOL DF 800 | Chemipol | DENSIPOL DF 800 is an antifoaming agent based on oxide copolymers on fatty acids. Cost-effective, free of silicone antifoaming agent. Effective throughout a wide range of pH and temperatures. Highly effective in controlling the foaming generation process ...展开 DENSIPOL DF 800 is an antifoaming agent based on oxide copolymers on fatty acids. Cost-effective, free of silicone antifoaming agent. Effective throughout a wide range of pH and temperatures. Highly effective in controlling the foaming generation process during manufacturing, handling, and storage processes of paints, aqueous glues, and cooling circuits. 收起 | Request Sample |
| DENSIPOL DF 820 | Chemipol | DENSIPOL DF 820 is an emulsion antifoaming agent based on alkoxylated compounds and fatty acids derivates. Cost-effective, free of silicone antifoaming agent. Effective throughout a wide range of pH and temperatures. Highly effective in controlling the f...展开 DENSIPOL DF 820 is an emulsion antifoaming agent based on alkoxylated compounds and fatty acids derivates. Cost-effective, free of silicone antifoaming agent. Effective throughout a wide range of pH and temperatures. Highly effective in controlling the foaming generation process during manufacturing, handling, and storage processes of paints, aqueous glues, and cooling circuits. Complies with Food-Contact Regulations: BfR XXXVI & FDA 21.176.210. 收起 | Request Sample |
| DENSIPOL PA 2497 | Chemipol | DENSIPOL PA 2497 is an antifoaming agent based on mineral compounds and nonionic surfactant specifically designed for controlling the foaming generation process during manufacturing, handling and storage processes of paints, printing inks, adhesives and a...展开 DENSIPOL PA 2497 is an antifoaming agent based on mineral compounds and nonionic surfactant specifically designed for controlling the foaming generation process during manufacturing, handling and storage processes of paints, printing inks, adhesives and aqueous glues. Cost-effective, silicone-free antifoaming agent. Excellent emulsifiability. Excellent antifoaming effect in paints with a PVC range between 50 and 85. 收起 | Request Sample |
| DENSIPOL PA 318 | Chemipol | DENSIPOL PA 318 is an antifoaming and defoamer agent based on mineral compounds and nonionic surfactants, specifically designed for avoiding foam generation during manufacturing and application of waterborne technical products and sewages. Excellent antif...展开 DENSIPOL PA 318 is an antifoaming and defoamer agent based on mineral compounds and nonionic surfactants, specifically designed for avoiding foam generation during manufacturing and application of waterborne technical products and sewages. Excellent antifoaming effect in paints with a PVC range between 30 and 70. 收起 | Request Sample |
| DENSIPOL PA 700 | Chemipol | DENSIPOL PA 700 is an antifoaming agent based on mineral compounds, wax, hydrophobic silica, and nonionic surfactants. Cost-effective antifoaming agent. Excellent emulsifiability properties. Highly effective in controlling the foaming generation process d...展开 DENSIPOL PA 700 is an antifoaming agent based on mineral compounds, wax, hydrophobic silica, and nonionic surfactants. Cost-effective antifoaming agent. Excellent emulsifiability properties. Highly effective in controlling the foaming generation process during manufacturing, handling, and storage processes of paints, printing inks, adhesives, and aqueous glues. 收起 | Request Sample |
| DENSIPOL PA 934 | Chemipol | DENSIPOL PA 934 is an antifoaming agent based on mineral compounds, wax, hydrophobic silica, and nonionic surfactants. Cost-effective, silicone-free antifoaming agent. Excellent emulsifiability properties. Highly effective in controlling the foaming gener...展开 DENSIPOL PA 934 is an antifoaming agent based on mineral compounds, wax, hydrophobic silica, and nonionic surfactants. Cost-effective, silicone-free antifoaming agent. Excellent emulsifiability properties. Highly effective in controlling the foaming generation process during manufacturing, handling, and storage processes of paints, printing inks, adhesives, and aqueous glues. Excellent antifoaming effect in low PVC paints. 收起 | Request Sample |
| DENSIPOL PS 100 | Chemipol | DENSIPOL PS 100 is an antifoaming agent based on organomodified, three-dimensional polysiloxanes and nonionic surfactants. Cost-effective antifoaming agent. Great efficacy in high-shearing conditions. Highly effective in controlling the foaming generation...展开 DENSIPOL PS 100 is an antifoaming agent based on organomodified, three-dimensional polysiloxanes and nonionic surfactants. Cost-effective antifoaming agent. Great efficacy in high-shearing conditions. Highly effective in controlling the foaming generation process during manufacturing, handling, and storage processes of paints, printing inks, adhesives, and aqueous glues. Due to its composition, DENSIPOL PS 100 does not generate a tinged effect, and that makes the product especially appropriate for high-brightness products. 收起 | Request Sample |
| DENSIPOL PS 200 | Chemipol | DENSIPOL PS 200 is an emulsion antifoaming agent based on organic, modified silicones suitable for a broad range of pH and temperatures. Highly effective in controlling the foaming generation process in several industrial processes, specially taladrines, ...展开 DENSIPOL PS 200 is an emulsion antifoaming agent based on organic, modified silicones suitable for a broad range of pH and temperatures. Highly effective in controlling the foaming generation process in several industrial processes, specially taladrines, industrial lubricants, and coolants. Cost-effective antifoaming agent. Great long-term foaming control. 收起 | Request Sample |
| DENSIPOL PS 400 | Chemipol | DENSIPOL PS 400 is an antifoaming agent based on organomodified polysiloxanes and polyglycols, specially designed for paints and industrial coatings. Cost-effective antifoaming agent. Suitable for indirect food contact (BfR, EU 2011/10) Highly effective i...展开 DENSIPOL PS 400 is an antifoaming agent based on organomodified polysiloxanes and polyglycols, specially designed for paints and industrial coatings. Cost-effective antifoaming agent. Suitable for indirect food contact (BfR, EU 2011/10) Highly effective in controlling the foaming generation process during manufacturing, handling, and storage processes of paints, printing inks, adhesives, and aqueous glues. Excellent antifoaming effect in paints with a PVC range between 50 and 85. 收起 | Request Sample |
| DENSIPOL PS 450 | Chemipol | DENSIPOL PS 450 is a defoamer agent based on organomodified polysiloxanes for paints and industrial coatings. With its excellent emulsifiability, improving the leveling, moistening, wear resistance, and slip resistance of the product. Highly effective in ...展开 DENSIPOL PS 450 is a defoamer agent based on organomodified polysiloxanes for paints and industrial coatings. With its excellent emulsifiability, improving the leveling, moistening, wear resistance, and slip resistance of the product. Highly effective in controlling the foaming generation process during manufacturing, handling, and storage processes of paints, printing ink, adhesives, and aqueous glues. Extensively used in a wide variety of aqueous technical products such as paints and coatings. 收起 | Request Sample |
| DENSIPOL PS 50 | Chemipol | DENSIPOL PS 50 is an antifoaming agent based on organomodified, three-dimensional polysiloxanes and nonionic surfactants. Cost-effective antifoaming agent. Great efficacy in high-shearing conditions. Highly effective in controlling the foaming generation ...展开 DENSIPOL PS 50 is an antifoaming agent based on organomodified, three-dimensional polysiloxanes and nonionic surfactants. Cost-effective antifoaming agent. Great efficacy in high-shearing conditions. Highly effective in controlling the foaming generation process during manufacturing, handling, and storage processes of paints, printing inks, adhesives, and aqueous glues. Due to its composition, DENSIPOL PS 50 does not generate a tinged effect, and that makes the product especially appropriate for high-brightness products. 收起 | Request Sample |
| DENSIPOL WO 2402 | Chemipol | DENSIPOL WO 2402 is an antifoaming agent based on hydrocarbons, fatty acids, and hydrophobic particles. Cost-effective antifoaming agent. Silicone free. Highly effective controlling the foaming generation process during manufacturing, handling, and storag...展开 DENSIPOL WO 2402 is an antifoaming agent based on hydrocarbons, fatty acids, and hydrophobic particles. Cost-effective antifoaming agent. Silicone free. Highly effective controlling the foaming generation process during manufacturing, handling, and storage processes of paints, printing inks, adhesives, and aqueous glues. 收起 | Request Sample |
| DENSIPOL WO 2901 | Chemipol | DENSIPOL WO 2901 is an antifoaming agent based on hydrocarbons, fatty acids and hydrophobic particles. Cost-effective antifoaming agent. Versatile antifoaming agent free of silicone. Highly effective controlling the foaming generation process during manuf...展开 DENSIPOL WO 2901 is an antifoaming agent based on hydrocarbons, fatty acids and hydrophobic particles. Cost-effective antifoaming agent. Versatile antifoaming agent free of silicone. Highly effective controlling the foaming generation process during manufacturing, handling and storage processes of paints, printing inks, adhesives and aqueous glues. Excellent antifoaming effect in paints with a PVC range between 50 and 85. Complies with Indirect Food Contact Regulations: FDA CFR Section 175.105 收起 | Request Sample |
| DENSIPOL WO 2915 | Chemipol | DENSIPOL WO 2915 is an antifoaming agent based on hydrocarbons, fatty acids, and hydrophobic particles. Cost-effective antifoaming agent. A versatile antifoaming agent with silicone. Boosted antifoaming effect for paints suitable for silicone. Highly effe...展开 DENSIPOL WO 2915 is an antifoaming agent based on hydrocarbons, fatty acids, and hydrophobic particles. Cost-effective antifoaming agent. A versatile antifoaming agent with silicone. Boosted antifoaming effect for paints suitable for silicone. Highly effective in controlling the foaming generation process during manufacturing, handling, and storage processes of paints, printing inks, adhesives and aqueous glues. Excellent antifoaming effect in paints with a PVC range between 40 and 85. 收起 | Request Sample |
| DENSIPOL WO 3025 | Chemipol | DENSIPOL WO 3025 is an antifoaming agent based on hydrocarbons, fatty acids, and hydrophobic particles. Cost-effective antifoaming agent. Excellent emulsifiability and great stability properties. Highly effective in controlling the foaming generation proc...展开 DENSIPOL WO 3025 is an antifoaming agent based on hydrocarbons, fatty acids, and hydrophobic particles. Cost-effective antifoaming agent. Excellent emulsifiability and great stability properties. Highly effective in controlling the foaming generation process during manufacturing, handling, and storage processes of paints, printing inks, adhesives, and aqueous glues. Excellent antifoaming effect in paints with a PVC range between 50 and 85. 收起 | Request Sample |
| DETERSOL AL 100 | Chemipol | DETERSOL AL 100 is a nonionic formulation based on a blend of ethoxylated alcohols. It applies to the most habitual aqueous paints raw materials. As a wetting agent, it enhances pigment uptake and color development and stabilizes pigment dispersion. DETER...展开 DETERSOL AL 100 is a nonionic formulation based on a blend of ethoxylated alcohols. It applies to the most habitual aqueous paints raw materials. As a wetting agent, it enhances pigment uptake and color development and stabilizes pigment dispersion. DETERSOL AL 100 has been proven to be highly effective in reducing the surface tension of pigments and mineral charges, improving its stability during the storage phase of aqueous paints. It prevents flotation and flocculation issues, as well as from rub-out phenomena. It improves the pigment uptake and color development in white bases, especially those used for tinting systems, and when they are combined with organic and inorganic pigment dispersions. 收起 | Request Sample |
| DETERSOL AL 74 | Chemipol | DETERSOL AL 74 is a non-ionic humectant based on a blend of ethoxylated alcohols. DETERSOL AL 74 is effective in reducing the surface tension of pigments and mineral charges, improving its stability during the storage phase of aqueous paints. DETERSOL AL ...展开 DETERSOL AL 74 is a non-ionic humectant based on a blend of ethoxylated alcohols. DETERSOL AL 74 is effective in reducing the surface tension of pigments and mineral charges, improving its stability during the storage phase of aqueous paints. DETERSOL AL 74 humectant activity prevents flotation and flocculation issues in aqueous paints. DETERSOL AL 74 humectant performance can be boosted when the product is combined with a CHEMICRYL dispersing agent. 收起 | Request Sample |
| DETERSOL ATS | Chemipol | DETERSOL ATS is a non-ionic surfactant with humectant properties. DETERSOL ATS is based on modified organopolysiloxanes with wetting properties. DETERSOL AL 74 is a versatile humectant suitable for a high number of applications: to reduce the surface tens...展开 DETERSOL ATS is a non-ionic surfactant with humectant properties. DETERSOL ATS is based on modified organopolysiloxanes with wetting properties. DETERSOL AL 74 is a versatile humectant suitable for a high number of applications: to reduce the surface tension of the treatments, to improve the flow properties of the product, or to increase the diffusion in foliage applications. 收起 | Request Sample |
| DETERSOL CARE | Chemipol | DETERSOL CARE is a silicone polyether appropriate to be used as an additive in the preservation of plastic and leather. Its excellent equalization properties lead to high smooth surfaces. DETERSOL CARE is specifically effective in aqueous formulations tha...展开 DETERSOL CARE is a silicone polyether appropriate to be used as an additive in the preservation of plastic and leather. Its excellent equalization properties lead to high smooth surfaces. DETERSOL CARE is specifically effective in aqueous formulations that contain polymers. Cost/effective product. 收起 | Request Sample |
| DETERSOL DA | Chemipol | DETERSOL DA is a wetting agent based on dioctyl sulfosuccinate, an anionic surfactant that acts to decrease surface tension. Specifically developed for improving the stability and increasing the paints and coating materials. Prevents the flocculation and...展开 DETERSOL DA is a wetting agent based on dioctyl sulfosuccinate, an anionic surfactant that acts to decrease surface tension. Specifically developed for improving the stability and increasing the paints and coating materials. Prevents the flocculation and rub-out issues. Due to its wetting properties, improves the dispersion and fluidity of the water base system. 收起 | Request Sample |
| DETERSOL EN 45 | Chemipol | DETERSOL EN 45 is a wetting agent of anionic surfactants, specifically developed for easing the moistening of aqueous paints on difficult surfaces, either it is due to its low porosity or its low surface tension. Suitable for the most habitual aqueous pai...展开 DETERSOL EN 45 is a wetting agent of anionic surfactants, specifically developed for easing the moistening of aqueous paints on difficult surfaces, either it is due to its low porosity or its low surface tension. Suitable for the most habitual aqueous paints raw material. It does not modify the scrub resistance, since it generates insoluble calcium salts during the drying process. It has been proven to be highly effective when used in paints that will be applied on difficult wetting surfaces (plasters, pearlite). It extends the open time of the product, neutralizing the repellent effect of some plaster additives. It does not affect the float resistance. The effectiveness within a broad range of pH. 收起 | Request Sample |
| EPM-2490 | NuSil Silicone Technology 1 | EPM-2490 is a two-part, white, thermally conductive, electrically insulating silicone system that is non-corrosive. It can be used in applications that require a a broad operating temperature range. It is ideal to be used when a form-in-place, thermal int...展开 EPM-2490 is a two-part, white, thermally conductive, electrically insulating silicone system that is non-corrosive. It can be used in applications that require a a broad operating temperature range. It is ideal to be used when a form-in-place, thermal interface material (TIM) is needed for use as a sealing, caulking, adhesive or potting material in electronics applications that require little volatility to prevent contamination in sensitive devices. This TIM is designed to provide heat transfer between electrical/electronic components and their heat sinks for a variety of component level packaging. 收起 | |
| EPM1-2493 | NuSil Silicone Technology 1 | EPM1-2493 is a white, thermally conductive silicone elastomer that has low viscosity and cures with the addition of heat. It can be used to adhere integrated circuit substrates, heat sinks, base plates or where grooves or other configurations that requir...展开 EPM1-2493 is a white, thermally conductive silicone elastomer that has low viscosity and cures with the addition of heat. It can be used to adhere integrated circuit substrates, heat sinks, base plates or where grooves or other configurations that require a material with limited flow. This product is ideal for applications that require a low volatility, conformal, thermally conductive silicone that can transfer heat between electrical components and and their heat sinks. 收起 | |
| FS-3502-1 | NuSil Silicone Technology 1 | FS-3502-1 is a white, fluorosilicone gel that cures in contact with most materials, exceptions include: sulfur-cured organic rubbers, latex, chlorinated rubbers, some RTV silicones and unreacted residues. This gel can be used for filling small gaps as wel...展开 FS-3502-1 is a white, fluorosilicone gel that cures in contact with most materials, exceptions include: sulfur-cured organic rubbers, latex, chlorinated rubbers, some RTV silicones and unreacted residues. This gel can be used for filling small gaps as well as applications that require solvent and/or fuel resistance. It bonds aggressively to most surfaces and can be used for components exposed to JP-8, aviation fuels and solvents. 收起 | |
| FUNGIPOL 237 | Chemipol | FUNGIPOL 237 is a broad-range dry film preservative based on an OIT, Carbendazim, and Diuron, specifically developed for protecting paint films against fungal and algal growth. Broad range of efficacy. Excellent fungicidal agent for preserving dry films o...展开 FUNGIPOL 237 is a broad-range dry film preservative based on an OIT, Carbendazim, and Diuron, specifically developed for protecting paint films against fungal and algal growth. Broad range of efficacy. Excellent fungicidal agent for preserving dry films of aqueous paints, polymeric dispersions, glues, mastics, and material protection. Dry-film preservatives are stable in a broad range of pH and temperatures. 收起 | Request Sample |
| FUNGIPOL 351 | Chemipol | FUNGIPOL 351 is a broad range dry film preservative based on an OIT, Carbendazim, and Diuron, specifically developed for protecting paint films against fungal and algal growth. Broad range of efficacy. Excellent fungicidal agent for preserving dry films o...展开 FUNGIPOL 351 is a broad range dry film preservative based on an OIT, Carbendazim, and Diuron, specifically developed for protecting paint films against fungal and algal growth. Broad range of efficacy. Excellent fungicidal agent for preserving dry films of aqueous paints, polymeric dispersions, glues, mastics, and material protection. Dry-film preservatives are stable in a broad range of pH and temperatures. 收起 | Request Sample |
| FUNGIPOL AX 45 | Chemipol | FUNGIPOL AX 45 is a broad-range dry film preservative based on a glycolic solution of OIT, specifically developed for protecting paint films against fungal and algal growth. Broad range of efficacy. Compatible with transparent formulations. Excellent fung...展开 FUNGIPOL AX 45 is a broad-range dry film preservative based on a glycolic solution of OIT, specifically developed for protecting paint films against fungal and algal growth. Broad range of efficacy. Compatible with transparent formulations. Excellent fungicidal agent for preserving dry films of aqueous paints, polymeric dispersions, glues, mastics, and material protection. Dry-film preservative stable in a broad range of pH and temperatures. 收起 | Request Sample |
| FUNGIPOL CP 1 | Chemipol | FUNGIPOL CP 1 is a microencapsulated dry film preservative for waterborne technical products. FUNGIPOL CP 1 is an innovative broad-range preservative based on microencapsulated OIT, specifically developed for protecting paint films against fungal and alga...展开 FUNGIPOL CP 1 is a microencapsulated dry film preservative for waterborne technical products. FUNGIPOL CP 1 is an innovative broad-range preservative based on microencapsulated OIT, specifically developed for protecting paint films against fungal and algal growth. FUNGIPOL CP 1 uses microencapsulation technology and is free of carbendazim and diuron and is suitable for VOC-free and eco-friendly formulations. FUNGIPOL CP 1 is stable in a broad range of pH and temperatures. Improved resistance against alkali, UV, and leaching. Dry-film is a preservative appropriate for interior and exterior paints. 收起 | Request Sample |
| FUNGIPOL CP 123 | Chemipol | FUNGIPOL CP 123 is a microencapsulated dry film preservative for waterborne technical products. FUNGIPOL CP 123 is an innovative broad-range preservative based on microencapsulated OIT, DCOIT and IPBC, specifically developed for protecting paint films aga...展开 FUNGIPOL CP 123 is a microencapsulated dry film preservative for waterborne technical products. FUNGIPOL CP 123 is an innovative broad-range preservative based on microencapsulated OIT, DCOIT and IPBC, specifically developed for protecting paint films against fungal and algal growth. FUNGIPOL CP 123 uses microencapsulation technology and is free of carbendazim and diuron and is suitable for VOC-free and eco-friendly formulations. FUNGIPOL CP 123 is a dry-film preservative stable in a broad range of pH and temperatures. Appropriate interior and exterior paints. 收起 | Request Sample |
| FUNGIPOL CP 14 N | Chemipol | FUNGIPOL CP 14 N is a microencapsulated dry film preservative for a waterborne technical product. FUNGIPOL CP 14 N is an innovative broad-range preservative based on microencapsulated OIT and Diuron, specifically developed for protecting paint films again...展开 FUNGIPOL CP 14 N is a microencapsulated dry film preservative for a waterborne technical product. FUNGIPOL CP 14 N is an innovative broad-range preservative based on microencapsulated OIT and Diuron, specifically developed for protecting paint films against fungal and algal growth. FUNGIPOL CP 14 N uses microencapsulation technology and is free of carbendazim and is suitable for VOC-free and eco-friendly formulations. FUNGIPOL CP 14 N is stable in a broad range of pH and temperatures. Improved resistance against alkali, UV, and leaching. Dry-film is a preservative appropriate for interior and exterior paints. 收起 | Request Sample |
| FUNGIPOL CP 15 | Chemipol | FUNGIPOL CP 15 is a microencapsulated dry film preservative for waterborne technical products. FUNGIPOL CP 15 is an innovative broad-range preservative based on microencapsulated OIT and Terbutryn, specifically developed for protecting paint films against...展开 FUNGIPOL CP 15 is a microencapsulated dry film preservative for waterborne technical products. FUNGIPOL CP 15 is an innovative broad-range preservative based on microencapsulated OIT and Terbutryn, specifically developed for protecting paint films against fungal and algal growth. FUNGIPOL CP 15 uses microencapsulation technology and is free of carbendazim and diuron and is suitable for VOC-free and eco-friendly formulations. FUNGIPOL CP 15 is stable in a broad range of pH and temperatures. Improved resistance against alkali, UV, and leaching. Dry-film is a preservative appropriate for interior and exterior paints. 收起 | Request Sample |
| FUNGIPOL CP 35 | Chemipol | FUNGIPOL CP 35 is a microencapsulated dry film preservative for waterborne technical products. FUNGIPOL CP 35 is an innovative broad-range preservative based on microencapsulated IPBC and Terbutryn, specifically developed for protecting paint films agains...展开 FUNGIPOL CP 35 is a microencapsulated dry film preservative for waterborne technical products. FUNGIPOL CP 35 is an innovative broad-range preservative based on microencapsulated IPBC and Terbutryn, specifically developed for protecting paint films against fungal and algal growth. FUNGIPOL CP 35 uses microencapsulation technology and is free of carbendazim and diuron and is suitable for VOC-free and eco-friendly formulations. FUNGIPOL CP 35 is stable in a broad range of pH and temperatures. Improved resistance against alkali, UV, and leaching. Dry-film is a preservative appropriate for interior and exterior paints. 收起 | Request Sample |
| FUNGIPOL P12 | Chemipol | FUNGIPOL P12 is a broad-range dry film preservative based on a glycolic solution of IPBC and OIT, specifically developed for protecting paint films against fungal and algal growth. Broad range of efficacy. Free of formaldehyde and CMR ingredients. Excelle...展开 FUNGIPOL P12 is a broad-range dry film preservative based on a glycolic solution of IPBC and OIT, specifically developed for protecting paint films against fungal and algal growth. Broad range of efficacy. Free of formaldehyde and CMR ingredients. Excellent fungicidal agent for preserving dry films of aqueous paints, polymeric dispersions, glues, mastics, and material protection. Dry-film preservative stable in a broad range of pH and temperatures. 收起 | Request Sample |
| FUNGIPOL P21 | Chemipol | FUNGIPOL P21 is a broad-range dry film preservative based on a glycolic solution of IPBC, specifically developed for protecting paint films against fungal and algal growth. Broad range of efficacy. Effective within a broad range of pH (until 10). Excellen...展开 FUNGIPOL P21 is a broad-range dry film preservative based on a glycolic solution of IPBC, specifically developed for protecting paint films against fungal and algal growth. Broad range of efficacy. Effective within a broad range of pH (until 10). Excellent fungicidal agent for preserving dry films of aqueous paints, polymeric dispersions, glues, mastics, and material protection. Dry-film preservative stable in a broad range of pH and temperatures. 收起 | Request Sample |
| LS-8941 | NuSil Silicone Technology 1 | LS-8941 is a two-part, optically clear, non-phenyl containing addition cure silicone. It is designed to stay thermo-optically stable with the exposure of heat and UV light. This product has a viscosity that is designed to be used with conventional Liquid ...展开 LS-8941 is a two-part, optically clear, non-phenyl containing addition cure silicone. It is designed to stay thermo-optically stable with the exposure of heat and UV light. This product has a viscosity that is designed to be used with conventional Liquid Injection Molding equipment, and the material is self-leveling for casting application techniques. It is also ideal for molding or casting hard, non-yellowing lenses for LED, solar or other applications where a hard, optically-stable silicone is needed. 收起 | |
| LS2-6140 | NuSil Silicone Technology 1 | LS2-6140 is an optically clear, primerless silicone encapsulant that has a low volatility and a high purity. This product can help protect electrical components and assemblies from moisture, chemicals, dust, shock, vibration, and other environmental hazar...展开 LS2-6140 is an optically clear, primerless silicone encapsulant that has a low volatility and a high purity. This product can help protect electrical components and assemblies from moisture, chemicals, dust, shock, vibration, and other environmental hazards. It has exceptional thermal stability and is designed to work in optically harsh environments where high power led and uv led packages are a factor. 收起 | |
| LS2-6941 | NuSil Silicone Technology 1 | LS2-6941 is an optically clear silicone elastomer that has a low viscosity and is solvent free. This product offers excellent physical and electrical stability across a broad temperature range. It can be used for photonics applications such as photo detec...展开 LS2-6941 is an optically clear silicone elastomer that has a low viscosity and is solvent free. This product offers excellent physical and electrical stability across a broad temperature range. It can be used for photonics applications such as photo detectors, lasers, HBLEDs, discrete optics and flat panel displays that require a 1.41 refractive index. It can also provide protection for electronic components from vibration, shock, dust, moisture and other environmental hazards by potting or encapsulating. 收起 | |
| Melafine® | OCI MELAMINE | Melafine®, in the form of a white crystalline powder, is a fine-grade melamine. This product can be used in high-performance intumescent coatings. During the intumescent process, Melafine® acts as a blowing agent, which releases gases that enhance consist...展开 Melafine®, in the form of a white crystalline powder, is a fine-grade melamine. This product can be used in high-performance intumescent coatings. During the intumescent process, Melafine® acts as a blowing agent, which releases gases that enhance consistent formation and expansion of a rigid carbon matrix that protects the substrate from further heat and damage. 收起 | |
| MelaminebyOCI™ GPH | OCI MELAMINE | MelaminebyOCI™ GPH, in the form of a white crystalline powder, is a melamine. This product has a particle size that is below 350 microns and has been produced by the gas-phase process. It can be used in coatings, adhesive resins, laminates, and flame reta...展开 MelaminebyOCI™ GPH, in the form of a white crystalline powder, is a melamine. This product has a particle size that is below 350 microns and has been produced by the gas-phase process. It can be used in coatings, adhesive resins, laminates, and flame retardants. 收起 | |
| MelaminebyOCI™ GPH-LD | OCI MELAMINE | MelaminebyOCI™ GPH-LD, in the form of a white crystalline powder, is a melamine. This product can be used in coating, adhesive resins, laminates, molding compounds, and flame retardants, among other uses. It has a particle size that is smaller than 60 mic...展开 MelaminebyOCI™ GPH-LD, in the form of a white crystalline powder, is a melamine. This product can be used in coating, adhesive resins, laminates, molding compounds, and flame retardants, among other uses. It has a particle size that is smaller than 60 microns and has been produced in a low-density gas-phase process. 收起 | |
| MelaminebyOCI™ SLP | OCI MELAMINE | MelaminebyOCI™ SLP, in the form of a fine grade white crystalline powder, is a melamine. This product has a particle size that is below 180 microns and has been produced by the shortened-liquid phase process. It can be used in coatings, adhesive resins, l...展开 MelaminebyOCI™ SLP, in the form of a fine grade white crystalline powder, is a melamine. This product has a particle size that is below 180 microns and has been produced by the shortened-liquid phase process. It can be used in coatings, adhesive resins, laminates, and flame retardants. 收起 | |
| Monomer SM6226 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Monomer SM6226 is a special tertiary acrylate used as a reactive amine synergist. | |
| Monomer SM6338 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Monomer SM6338 is a special tertiary acrylate used as a reactive amine synergist. | |
| Photoinitiator 1173 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Photoinitiator 1173 is a UV photo initiator, which is widely used in clear coatings for wood, plastics and metal, and overprint varnish. | |
| Photoinitiator 184 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Photoinitiator 184 is a UV photo initiator, which is widely used in clear coatings for wood, plastics and metal, and overprint varnish. | |
| R-1008-1 | NuSil Silicone Technology 1 | R-1008-1 is a white, RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating t...展开 R-1008-1 is a white, RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F).This product can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. 收起 | |
| R-1008-2 | NuSil Silicone Technology 1 | R-1008-2 is a black RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion, and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating t...展开 R-1008-2 is a black RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion, and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F).This product can be used on silicone rubber parts as a marking ink where the coating must maintain long term stability. 收起 | |
| R-1008-3 | NuSil Silicone Technology 1 | R-1008-3 is a red, non corrosive, flowable silicone elastomer dispersion that cures in 7 days at room temperature. This product is long lasting, and is used as a marking ink for silicone rubber parts as well as other components that require a coating with...展开 R-1008-3 is a red, non corrosive, flowable silicone elastomer dispersion that cures in 7 days at room temperature. This product is long lasting, and is used as a marking ink for silicone rubber parts as well as other components that require a coating with long term stability. 收起 | |
| R-1008-4 | NuSil Silicone Technology 1 | R-1008-4 is an orange, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must ma...展开 R-1008-4 is an orange, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). 收起 | |
| R-1008-5 | NuSil Silicone Technology 1 | R-1008-5 is a yellow, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must mai...展开 R-1008-5 is a yellow, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). 收起 | |
| R-1008-6 | NuSil Silicone Technology 1 | R-1008-6 is a green, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must main...展开 R-1008-6 is a green, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). 收起 | |
| R-1008-7 | NuSil Silicone Technology 1 | R-1008-7 is a blue, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maint...展开 R-1008-7 is a blue, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). 收起 | |
| R-1008-8 | NuSil Silicone Technology 1 | R-1008-8 is a violet, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must mai...展开 R-1008-8 is a violet, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). 收起 | |
| R-1082 | NuSil Silicone Technology 1 | R-1082 is a one part, translucent RTV silicone elastomer that is dispersed in xylene. This product is specifically designed for spraying, dip casting, and room temperature curing of thin, elastomeric films. It is important to thoroughly mix the product ju...展开 R-1082 is a one part, translucent RTV silicone elastomer that is dispersed in xylene. This product is specifically designed for spraying, dip casting, and room temperature curing of thin, elastomeric films. It is important to thoroughly mix the product just prior to adding a solvent and to exercise care to prevent solvent loss during dearing. 收起 | |
| R-1182 | NuSil Silicone Technology 1 | R-1182 is a low coefficient of friction silicone coating and is cured with acetoxy. This product cures to a smooth silicone film that decreases the coefficient of friction (CoF) and increases abrasion resistance for moving, sliding, and rubbing parts. It ...展开 R-1182 is a low coefficient of friction silicone coating and is cured with acetoxy. This product cures to a smooth silicone film that decreases the coefficient of friction (CoF) and increases abrasion resistance for moving, sliding, and rubbing parts. It will provide a RTV, low friction coating on cured silicone substrates. For the best results this coating needs to be applied by spraying or dipping. 收起 | |
| R-1505 | NuSil Silicone Technology 1 | R-1505 is a non-corrosive, static dissipative RTV silicone that cures at room temperature to form a flexible, resilient, conductive bond or seal. It is best used for applications that require a non-corrosive adhesive/sealant. This product provides protect...展开 R-1505 is a non-corrosive, static dissipative RTV silicone that cures at room temperature to form a flexible, resilient, conductive bond or seal. It is best used for applications that require a non-corrosive adhesive/sealant. This product provides protection from extremes in humidity, temperature, radiation, thermal stress and mechanical stress. It can also be utilized as a shielding for RFI and EMI in electronic applications. 收起 | |
| R-2100-1 | NuSil Silicone Technology 1 | R-2100-1 is a white silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is idea...展开 R-2100-1 is a white silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal as a marking ink on silicone parts as well as other components where the coating must demonstrate a long-term stability. 收起 | |
| R-2100-2 | NuSil Silicone Technology 1 | R-2100-2 is a black silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is idea...展开 R-2100-2 is a black silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal as a marking ink on silicone parts as well as other components where the coating must demonstrate a long-term stability. 收起 | |
| R-2182 | NuSil Silicone Technology 1 | R-2182 is a low coefficient of friction silicone coating that cures to a smooth film that decreases the friction and increases abrasion resistance for moving, sliding, and rubbing parts. It provides a heat-cured, low friction coating on cured silicone sub...展开 R-2182 is a low coefficient of friction silicone coating that cures to a smooth film that decreases the friction and increases abrasion resistance for moving, sliding, and rubbing parts. It provides a heat-cured, low friction coating on cured silicone substrates and results in a reduction of surface tack. It is best to apply by spraying or dipping. 收起 | |
| R-2188 | NuSil Silicone Technology 1 | R-2188 is a silicone potting and encapsulating elastomer that is pourable, self-leveling, and cures at room temperature. This product is ideal for the encapsulating, potting and coating of modules, relays, and a variety of AC/DC converters including high ...展开 R-2188 is a silicone potting and encapsulating elastomer that is pourable, self-leveling, and cures at room temperature. This product is ideal for the encapsulating, potting and coating of modules, relays, and a variety of AC/DC converters including high power and planar packages. It can help protect against shock, vibration, moisture, contaminants and dust. The low viscosity of this elastomer will allow the potting of complex geometries, and it will not trap air. 收起 | |
| R-2634 | NuSil Silicone Technology 1 | R-2634 is a two-part, electrically conductive RTV silicone that is designed for enhanced performance in extreme high and low temperatures. It can be used as an adhesive to bond covers on housings or where grooves and other configurations require a non-flo...展开 R-2634 is a two-part, electrically conductive RTV silicone that is designed for enhanced performance in extreme high and low temperatures. It can be used as an adhesive to bond covers on housings or where grooves and other configurations require a non-flowable material. This product is especially useful for sealing formed-in-place conductive gaskets and grounding connections. It can also be used for EMI and RFI shielding for aerospace and electrical applications. 收起 | |
| R-2637 | NuSil Silicone Technology 1 | R-2637 is a tan, electrically conductive RTV silicone that is designed to cure at room temperature and more rapidly at elevated temperatures. It can be used for RFI and EMI shielding for aerospace applications. This product is excellent for formed-in-plac...展开 R-2637 is a tan, electrically conductive RTV silicone that is designed to cure at room temperature and more rapidly at elevated temperatures. It can be used for RFI and EMI shielding for aerospace applications. This product is excellent for formed-in-place conductive grounding connections and gaskets. It can also be used to adhere covers on housings that require a non-flowable to limited flow material. 收起 | |
| R-2655 | NuSil Silicone Technology 1 | R-2655 is a high strength, transparent RTV silicone elastomer that has a low viscosity and an accelerated cure rate when heat is added. This product can be used to provide environmental protection in potting, encapsulating and coating applications where r...展开 R-2655 is a high strength, transparent RTV silicone elastomer that has a low viscosity and an accelerated cure rate when heat is added. This product can be used to provide environmental protection in potting, encapsulating and coating applications where radiation resistance, low temperature flexibility, oxidation and thermal stability are needed. The low viscosity of this elastomer allows for easy flow around complex parts and it provides exceptional shock and electrical insulation resistance. 收起 | |
| R-2930 | NuSil Silicone Technology 1 | R-2930 is a two-part, white, thermally conductive silicone that cures rapidly with the addition of heat. This product can be used as an adhesive for integrated circuit substrates, heat sinks, base plates or where grooves or other configurations require a ...展开 R-2930 is a two-part, white, thermally conductive silicone that cures rapidly with the addition of heat. This product can be used as an adhesive for integrated circuit substrates, heat sinks, base plates or where grooves or other configurations require a non-flowable to limited flow material. It can also provide the transfer of heat between electrical/electronic components and their heat sinks. 收起 | |
| R-2939 | NuSil Silicone Technology 1 | R-2939 is a two-part, white, pourable, thermally conductive silicone that has a low viscosity and cures rapidly with the addition of heat. It can provide the transfer of heat between electrical/electronic components and their heat sinks. This product is i...展开 R-2939 is a two-part, white, pourable, thermally conductive silicone that has a low viscosity and cures rapidly with the addition of heat. It can provide the transfer of heat between electrical/electronic components and their heat sinks. This product is ideally used as an adhesive for openings in modules and housings where grooves or other configurations require a non-flowable to limited flow material. 收起 | |
| R-2940 | NuSil Silicone Technology 1 | R-2940 is a thermally conductive silicone that has a high strength that can be cured rapidly with the addition of heat. It can be used to adhere base plates, integrated circuit substrates, heat sinks, and other configurations that require a material that ...展开 R-2940 is a thermally conductive silicone that has a high strength that can be cured rapidly with the addition of heat. It can be used to adhere base plates, integrated circuit substrates, heat sinks, and other configurations that require a material that is non-flowable to a limited flow. It can also be used to provide heat transfer between electrical/electronic components and their heat sinks. 收起 | |
| R-2949 | NuSil Silicone Technology 1 | R-2949 is a two-part, white, thermally conductive silicone that can cure rapidly with the addition of heat. It is an ideal product to be used in applications that require protection against extreme low and high temperatures. It can be used as an adhesive ...展开 R-2949 is a two-part, white, thermally conductive silicone that can cure rapidly with the addition of heat. It is an ideal product to be used in applications that require protection against extreme low and high temperatures. It can be used as an adhesive to bond openings in housings and modules where grooves or other configurations require a limited flow material with moderate thermal conductivity. It can also provide the transfer of heat between electrical components and their heat sinks. 收起 | |
| R3-1075 | NuSil Silicone Technology 1 | R3-1075 is a one part, RTV silicone dispersion that has a non-corrosive cure. This product can be used as a protective coating that will prevent erosion and corrosion of various parts and surfaces in rockets, missiles, aircraft and launch equipment. It ca...展开 R3-1075 is a one part, RTV silicone dispersion that has a non-corrosive cure. This product can be used as a protective coating that will prevent erosion and corrosion of various parts and surfaces in rockets, missiles, aircraft and launch equipment. It can also be utilized as a conformal coating for electrical and electronic components including rigid and flexible printed circuit boards. 收起 | |
| R4-1140 | NuSil Silicone Technology 1 | R4-1140 is a one-part, self leveling, solvent-free silicone adhesive that cures at room temperature upon exposure to atmospheric moisture. This product bonds aggressively to many surfaces including ceramics, metals, glass, synthetic and natural fibers, wo...展开 R4-1140 is a one-part, self leveling, solvent-free silicone adhesive that cures at room temperature upon exposure to atmospheric moisture. This product bonds aggressively to many surfaces including ceramics, metals, glass, synthetic and natural fibers, wood, painted surfaces, many plastics and other silicone rubbers. 收起 | |
| SCV-2596 | NuSil Silicone Technology 1 | SCV-2596 is a two-part, black electrically conductive RTV silicone that can be used for RFI and EMI shielding in electronic and space applications. This product can be used to adhere covers onto housing or for any application where grooves and other confi...展开 SCV-2596 is a two-part, black electrically conductive RTV silicone that can be used for RFI and EMI shielding in electronic and space applications. This product can be used to adhere covers onto housing or for any application where grooves and other configurations require a flowable to limited flow material. It features Ultra Low OutgassingTM which helps it perform under extreme operating conditions and helps avoid condensation in sensitive devices. 收起 | |
| SCV1-2599 | NuSil Silicone Technology 1 | SCV1-2599 is a two-part, white, thermally conductive silicone that cures with the addition of heat. It provides heat transfer between electrical/electronic components and their heat sinks. This product can be used to adhere integrated circuit substrates, ...展开 SCV1-2599 is a two-part, white, thermally conductive silicone that cures with the addition of heat. It provides heat transfer between electrical/electronic components and their heat sinks. This product can be used to adhere integrated circuit substrates, base plates, heat sinks or where grooves require a non-flowable to limited flow material. 收起 | |
| SCV2-2590 | NuSil Silicone Technology 1 | SCV2-2590 is a clear silicone that features Ultra Low OutgassingTM and has a low viscosity. It exceeds low outgas specifications outlined in NASA and the European Space Agency. This product can act as an embedding compound for environmental protection of ...展开 SCV2-2590 is a clear silicone that features Ultra Low OutgassingTM and has a low viscosity. It exceeds low outgas specifications outlined in NASA and the European Space Agency. This product can act as an embedding compound for environmental protection of electronic components. It will protect against extreme temperatures, humidity, radiation, thermal and mechanical stress. 收起 | |
| SCV2-2599 | NuSil Silicone Technology 1 | SCV2-2599 is a thixotropic, thermally conductive silicone that is designed to allow bond line thicknesses of < or = 50 microns. This product cures with the addition of heat and provides heat transfer between electrical/electronic components and their heat...展开 SCV2-2599 is a thixotropic, thermally conductive silicone that is designed to allow bond line thicknesses of < or = 50 microns. This product cures with the addition of heat and provides heat transfer between electrical/electronic components and their heat sinks. It can also be used as an adhesive for base plates, integrated circuit substrates, heat sinks or where grooves require a non-flow material. 收起 | |
| SP-120 | NuSil Silicone Technology 1 | SP-120 is a silicone primer that is formulated for use with one and two-part RTV systems, and does not need mixing.The translucent color of SP-120 helps to preserve visibility with other translucent products. This primer will also improve the adhesion of ...展开 SP-120 is a silicone primer that is formulated for use with one and two-part RTV systems, and does not need mixing.The translucent color of SP-120 helps to preserve visibility with other translucent products. This primer will also improve the adhesion of the RTV systems to other substrates such as metals, ceramics, glass, and wood. 收起 |
