| ACROCRYL™ 63-972 | Allnex | ACROCRYL™ 63-972 is a very hard, APEO free, high molecular weight acrylic copolymer emulsion with excellent gloss and clarity, excellent blanch and water resistance, very good toughness and flexibility and good solvent and alkali resistance. Pendant react...展开 ACROCRYL™ 63-972 is a very hard, APEO free, high molecular weight acrylic copolymer emulsion with excellent gloss and clarity, excellent blanch and water resistance, very good toughness and flexibility and good solvent and alkali resistance. Pendant reactive groups on the polymer confer thermal or ambient-temperature crosslinking. 收起 | Request Sample |
| ACROPOL™ 63-075 | Allnex | ACROPOL™ 63-075 is a vinyl acetate homopolymer emulsion, providing good all-round formulating flexibility, excellent mechanical stability and fast-set characteristics. It is recommended for the formulation of packaging adhesives for most types of paper an...展开 ACROPOL™ 63-075 is a vinyl acetate homopolymer emulsion, providing good all-round formulating flexibility, excellent mechanical stability and fast-set characteristics. It is recommended for the formulation of packaging adhesives for most types of paper and board stock, and is also suitable for use as a base in compounded woodworking and building adhesives. 收起 | Request Sample |
| ACROPOL™ 63-893 | Allnex | ACROPOL™ 63-893 is a high molecular weight vinyl acetate acrylic copolymer emulsion with good tint acceptance, stability to zinc oxide pigments and wide formulating latitude. It may be used to formulate a wide range of interior/exterior paints where it pr...展开 ACROPOL™ 63-893 is a high molecular weight vinyl acetate acrylic copolymer emulsion with good tint acceptance, stability to zinc oxide pigments and wide formulating latitude. It may be used to formulate a wide range of interior/exterior paints where it provides good scrub and wear resistance, and good early water resistance. 收起 | Request Sample |
| ACROPOL™ 63-990 | Allnex | Acropol 63-990 is a high molecular weight vinyl acetate acrylic copolymer emulsion with good tint acceptance, and providing wide formulating latitude. It may be used to a wide range of low odour interior paints, with very good scrub and wear resistance an...展开 Acropol 63-990 is a high molecular weight vinyl acetate acrylic copolymer emulsion with good tint acceptance, and providing wide formulating latitude. It may be used to a wide range of low odour interior paints, with very good scrub and wear resistance and good resistance to blocking. 收起 | Request Sample |
| ACURE™ 510-100 | Allnex | ACURE™ 510-100 is a malonate functional polyester resin. | Request Sample |
| ACURE™ 510-170 | Allnex | ACURE™ 510-170 is a malonate functional polyester resin with succinimide. | Request Sample |
| ACURE™ 510-174 | Allnex | ACURE™ 510-174 is a malonate functional polyester resin with a CH equivalent weight of 119 g/eq (calculated on as-supplied product), for use as a donor resin in ACURE systems. Contains 1.5 +/- 0.05 % succinimide, calculated on solid binder. | Request Sample |
| ACURE™ 510-190 | Allnex | ACURE™ 510-190 is the donor resin in extremely fast drying topcoats for use in Marine and Protective and various premium, non-isocyanate topcoat systems, which is modified with s-SCA. ACURE™ based topcoats based on ACURE™ 510-190 feature excellent hardnes...展开 ACURE™ 510-190 is the donor resin in extremely fast drying topcoats for use in Marine and Protective and various premium, non-isocyanate topcoat systems, which is modified with s-SCA. ACURE™ based topcoats based on ACURE™ 510-190 feature excellent hardness development coupled with excellent outdoor durability, high cross line densities, outstanding chemical resistance and improved SAG resistance on vertical surfaces. 收起 | Request Sample |
| ACURE™ 510-300 | Allnex | ACURE™ 510-300 is a malonate-functional high flow polyester resin, which functions as a donor resin in ACURE™, non-isocyanate, coatings systems. Acute based topcoats based on ACURE™ 510-300 feature excellent hardness development coupled with excellent out...展开 ACURE™ 510-300 is a malonate-functional high flow polyester resin, which functions as a donor resin in ACURE™, non-isocyanate, coatings systems. Acute based topcoats based on ACURE™ 510-300 feature excellent hardness development coupled with excellent outdoor durability, high cross-link densities and outstanding chemical resistance. ACURE™ paints exhibit extremely fast dry times combined with long pot lives and tuneable open times. 收起 | Request Sample |
| ACURE™ 510-372 | Allnex | ACURE™ 510-372 is a modified malonate-functional high flow polyester resin, which functions as a donor resin in ACURE™, non-isocyanate, coatings systems. Acure™ topcoats based on Acure™ 510-372 feature fast development high hardness, excellent scratch/ma...展开 ACURE™ 510-372 is a modified malonate-functional high flow polyester resin, which functions as a donor resin in ACURE™, non-isocyanate, coatings systems. Acure™ topcoats based on Acure™ 510-372 feature fast development high hardness, excellent scratch/mar resistance, good flow and leveling, high cross-link densities, excellent solvent resistance, low applied VOCs, and good outdoor durability. Acure™ paints exhibit extremely fast dry times with long pot lives and tuneable open times. Acure 510-372™ contains 1.4 – 1.5% succinimide, a kinetic additive, which increases pot-life and open time. 收起 | Request Sample |
| ACURE™ 510-400 | Allnex | ACURE™ 510-400 is a low molecular weight, acetoacetate functional resin which when used in ACURE™, non-isocyanate, systems in place of other kinetic additives, increases the water and humidity resistance of ACURE™ paint films. The acetoacetate functionali...展开 ACURE™ 510-400 is a low molecular weight, acetoacetate functional resin which when used in ACURE™, non-isocyanate, systems in place of other kinetic additives, increases the water and humidity resistance of ACURE™ paint films. The acetoacetate functionality allows this reactive diluent to crosslink and react in to the polymer network and is used as a modifying donor resin in ACURE™ systems. 收起 | Request Sample |
| ACURE™ 550-100 | Allnex | ACURE™ 550-100 is an ACURE certified trimethylolpropane triacrylate. | Request Sample |
| ACURE™ 550-105 | Allnex | ACURE™ 550-105 is an ACURE certified ditrimethylolpropane tetraacrylate. | Request Sample |
| ADDITOL® E 04707 | Allnex | ADDITOL® E 04707 is a semi-crystalline polyester resin to be used as additive acting as polymeric flexibilizer for formulations based on superdurable polyurethanes. ADDITOL® E 04707 provides a higher degree of flexibility and mechanical resistance of coat...展开 ADDITOL® E 04707 is a semi-crystalline polyester resin to be used as additive acting as polymeric flexibilizer for formulations based on superdurable polyurethanes. ADDITOL® E 04707 provides a higher degree of flexibility and mechanical resistance of coatings. 收起 | Request Sample |
| ADDITOL® P 950 | Allnex | 具有摩擦带电活性的母料，用于混合型，TGIC型，聚氨酯型和TGIC替换体系。户内户外均可使用 | Request Sample |
| ADDITOL® P 965 | Allnex | 一种芳香族氨基甲酸酯加合物，用作羟基聚酯树脂交联剂，用于制备聚氨酯粉末涂料 | Request Sample |
| ADDITOL® SXK 407 N | Allnex | ADDITOL® SXK 407 N is a catalyst for heat curing phenolic resins and combinations of phenolic- and epoxide resins. The addition of ADDITOL SXK 407 N also results in improved adhesion and resistance against sulphur staining. | Request Sample |
| ADDITOL® VXW 6252 | Allnex | ADDITOL® VXW 6252 is a curing component for cathodic precipitable acrylate binders. | Request Sample |
| ADDITOL® VXW 6385 | Allnex | ADDITOL® VXW 6385 is a curing component for cathodic precipitable acrylate binders. It serves as a cross-linking component for acrylate binders for the production of dark colored as well as white or bright colored electro dipping paints by means of a tin ...展开 ADDITOL® VXW 6385 is a curing component for cathodic precipitable acrylate binders. It serves as a cross-linking component for acrylate binders for the production of dark colored as well as white or bright colored electro dipping paints by means of a tin catalysis. 收起 | Request Sample |
| ADDITOL® XL 6589 | Allnex | ADDITOL® XL 6589 is a thermoplastic grinding resin with excellent compatibility in refinish & industrial paints. Using ADDITOL® XL 6589 with ADDITOL® VXL 6212 or ADDITOL® VXL 6237N produces pigment concentrates with excellent color development, stability,...展开 ADDITOL® XL 6589 is a thermoplastic grinding resin with excellent compatibility in refinish & industrial paints. Using ADDITOL® XL 6589 with ADDITOL® VXL 6212 or ADDITOL® VXL 6237N produces pigment concentrates with excellent color development, stability, and low viscosity. This combination can be used for inorganic and organic pigments, fillers and extenders. Concentrates with these combinations can be utilized in paint systems without negative impact on finished paint film hardness. 收起 | Request Sample |
| ADDITOL® XW 6528 | Allnex | 可水稀释，改性聚酯-丙烯酸酯树脂 | Request Sample |
| ADDITOL® XW 6535 | Allnex | 为水基及溶剂基低VOC体系设计的研磨用醇酸树脂。 | Request Sample |
| ADDITOL® XW 6591 | Allnex | ADDITOL® XW 6591 is a water dilutable, modified polyester-acrylate polymer. It can be used for colour- and shading pigment pastes. It is compatible with waterborne air-drying and stoving alkyds, waterborne acrylic resins, UV- curing systems, PU- dispersio...展开 ADDITOL® XW 6591 is a water dilutable, modified polyester-acrylate polymer. It can be used for colour- and shading pigment pastes. It is compatible with waterborne air-drying and stoving alkyds, waterborne acrylic resins, UV- curing systems, PU- dispersions and plastic dispersions. 收起 | Request Sample |
| ALNOVOL® PN 160 | Allnex | 非自固化线性酚醛树脂，用于橡胶补强 | Request Sample |
| ALNOVOL® PN 320/PAST | Allnex | 非自固化线性酚醛树脂，用于橡胶补强。用于抗汽油涂料，密封剂和电绝缘清漆 | Request Sample |
| ALNOVOL® PN 760 | Allnex | ALNOVOL® PN 760/PAST is a non self-crosslinking modified phenol novolac. The resin is used in rubber compounds as adhesion promoter for steel and textile cord. Alnovol® PN 760 is incorporated into the mix in the first stage of compounding. Due to the low ...展开 ALNOVOL® PN 760/PAST is a non self-crosslinking modified phenol novolac. The resin is used in rubber compounds as adhesion promoter for steel and textile cord. Alnovol® PN 760 is incorporated into the mix in the first stage of compounding. Due to the low content of free phenol processing does not generate any vapors and it is not accompanied by odorous annoyance. 收起 | Request Sample |
| ALNOVOL® UF 410 RPC | Allnex | ALNOVOL® UF 410 RPC is a carbamic resin on silica. It is compatible with most of the synthetic and natural rubbers. Due to the silica carrier in solvents, no clear solution is possible. | Request Sample |
| AQUAPOL™ 102S | Allnex | AQUAPOL™ 102S is an aqueous dispersion of a styrene acrylic copolymer. It is recommended for 2 pack cementitious based waterproofing membranes for internal wet areas prior to tiling and general purpose gap fillers. | Request Sample |
| AQUAPOL™ 370S | Allnex | AQUAPOL™ 370S is a high solids styrene acrylic for 2 pack cementitious based water proofing membranes and coatings, both internal and exterior applications. | Request Sample |
| BAL 101 H WS-70 | Bonyan Kala Chemie Co. | BAL 101 H WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 800-1500 stoke at 25°C and is used in industrial varnishes, wood and metal coatings, and g...展开 BAL 101 H WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 800-1500 stoke at 25°C and is used in industrial varnishes, wood and metal coatings, and gloss and semi gloss architectural paints. 收起 | |
| BAL 101 L WS-70 | Bonyan Kala Chemie Co. | BAL 101 L WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 350-650 stoke at 25°C and is used in industrial varnishes, metal structural coatings, and ...展开 BAL 101 L WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 350-650 stoke at 25°C and is used in industrial varnishes, metal structural coatings, and gloss and semi gloss architectural paints. 收起 | |
| BAL 102 WS-70 | Bonyan Kala Chemie Co. | BAL 102 WS-70 is a long oil alkyd resin that is used for its coverage, drying, gloss retention, pigment wetting, and dispersing properties. This product has a viscosity of 250-500 stoke at 25°C and is mainly used as a paste in architectural paints, and in...展开 BAL 102 WS-70 is a long oil alkyd resin that is used for its coverage, drying, gloss retention, pigment wetting, and dispersing properties. This product has a viscosity of 250-500 stoke at 25°C and is mainly used as a paste in architectural paints, and in architectural and industrial varnishes. 收起 | |
| BAL 103 WS-70 | Bonyan Kala Chemie Co. | BAL 103 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, pigment wetting, dispersing, and coverage properties. This product has a viscosity of 330-550 stoke at 25°C and is used in industrial varnishes, wood...展开 BAL 103 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, pigment wetting, dispersing, and coverage properties. This product has a viscosity of 330-550 stoke at 25°C and is used in industrial varnishes, wood and metal coatings, and gloss and semi gloss architectural paints. 收起 | |
| BAL 104 WS-70 | Bonyan Kala Chemie Co. | BAL 104 WS-70 is a long oil alkyd resin that is used for its solvent acceptation and filler accountability properties. This product has a viscosity of 1000-3500 stoke at 25°C and is mainly used in metal structural coatings, industrial, wood, metal, anti-c...展开 BAL 104 WS-70 is a long oil alkyd resin that is used for its solvent acceptation and filler accountability properties. This product has a viscosity of 1000-3500 stoke at 25°C and is mainly used in metal structural coatings, industrial, wood, metal, anti-corrosion and anti-rust primers. 收起 | |
| BAL 106 H WS-70 | Bonyan Kala Chemie Co. | BAL 106 H WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 500-1500 stoke at 25°C and is mainly used in metal structural,...展开 BAL 106 H WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 500-1500 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 106 L WS-70 | Bonyan Kala Chemie Co. | BAL 106 L WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, pigment wetting, good coverage and dispersing properties. This product has a viscosity of 300-500 stoke at 25°C and is mainly used in metal structural, wood, and metal...展开 BAL 106 L WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, pigment wetting, good coverage and dispersing properties. This product has a viscosity of 300-500 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, spray paints, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 108 WS-70 | Bonyan Kala Chemie Co. | BAL 108 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, solvent acceptation, good coverage and adhesion properties. This product has a viscosity of 500-1000 stoke at 25°C and is mainly used in metal structural, wood...展开 BAL 108 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, solvent acceptation, good coverage and adhesion properties. This product has a viscosity of 500-1000 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 116 WS-70 | Bonyan Kala Chemie Co. | BAL 116 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, hardness and filler accountability properties. This product has a viscosity of 1000-2500 stoke at 25°C and is mainly used in metal structural, wood,...展开 BAL 116 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, hardness and filler accountability properties. This product has a viscosity of 1000-2500 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 118 WS-70 | Bonyan Kala Chemie Co. | BAL 118 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 1000-3000 stoke at 25°C and is mainly used in wood and metal coa...展开 BAL 118 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 1000-3000 stoke at 25°C and is mainly used in wood and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 120 WS-70 | Bonyan Kala Chemie Co. | BAL 120 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and solvent acceptation properties. This product has a viscosity of 300-700 stoke at 25°C and is mainly used in wood and metal coating...展开 BAL 120 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and solvent acceptation properties. This product has a viscosity of 300-700 stoke at 25°C and is mainly used in wood and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAM 202 WS-55 | Bonyan Kala Chemie Co. | BAM 202 WS-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 350-900 stoke ...展开 BAM 202 WS-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 350-900 stoke at 25°C and is mainly used in zinc chromate primers, industrial machinery coatings, metal structural coatings, and spray, auto body repair and industrial air-drying paints. 收起 | |
| BAM 203 X-60 | Bonyan Kala Chemie Co. | BAM 203 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-100 stoke at...展开 BAM 203 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-100 stoke at 25°C and is mainly used in auto body repair paints, metallic paints, industrial machinery coatings, metal structural coatings, and industrial air-drying paints. 收起 | |
| BAM 204 WS-50 | Bonyan Kala Chemie Co. | BAM 204 WS-50 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 150-350 stoke ...展开 BAM 204 WS-50 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 150-350 stoke at 25°C and is mainly used in cabinet and spray paints, industrial air-drying paints, metal structural coatings, industrial machinery coatings, paste for architectural paints, and anti-corrosion primers. 收起 | |
| BAM 208 WSX-55 | Bonyan Kala Chemie Co. | BAM 208 WSX-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-180 stoke ...展开 BAM 208 WSX-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-180 stoke at 25°C and is mainly used in auto body repair paints, industrial machinery coatings, cabinet and spray paints, and industrial air-drying paints. 收起 | |
| BAM 212 X-60 | Bonyan Kala Chemie Co. | BAM 212 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 60-90 stoke at ...展开 BAM 212 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 60-90 stoke at 25°C and is mainly used in auto body repair paints, industrial machinery coatings, metallic paints, industrial air-drying paints, and paint paste. 收起 | |
| BAS 302 X-60 | Bonyan Kala Chemie Co. | BAS 302 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-80 stoke at 25°C and is mainly used in...展开 BAS 302 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-80 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, amino resin based stoving paints, acid curing coatings, and printing inks. 收起 | |
| BAS 305 X-50 | Bonyan Kala Chemie Co. | BAS 305 X-50 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 40-90 stoke at 25°C and is mainly used in...展开 BAS 305 X-50 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 40-90 stoke at 25°C and is mainly used in hammer finish paints, anti-corrosion primers, fast dry paints, and industrial air-drying paints. 收起 | |
| BAS 307 X-60 | Bonyan Kala Chemie Co. | BAS 307 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 250-450 stoke at 25°C and is mainly used ...展开 BAS 307 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 250-450 stoke at 25°C and is mainly used in nitro-cellulose lacquers, amino resin based stoving paints, acid curing coatings, and auto parts stoving paints. 收起 | |
| BAS 310 H X-60 | Bonyan Kala Chemie Co. | BAS 310 H X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 200-400 stoke at 25°C and is mainly use...展开 BAS 310 H X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 200-400 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, acid curing coatings, and anti-corrosion primers. 收起 | |
| BAS 310 L X-60 | Bonyan Kala Chemie Co. | BAS 310 L X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 100-200 stoke at 25°C and is mainly use...展开 BAS 310 L X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 100-200 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, acid curing coatings, and anti-corrosion primers. 收起 | |
| BAS 312 X-60 | Bonyan Kala Chemie Co. | BAS 312 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-120 stoke at 25°C and is mainly used i...展开 BAS 312 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-120 stoke at 25°C and is mainly used in nitro-cellulose paints, alkyd amin lacquers, and anti-corrosion primers. 收起 | |
| BAS 313 X-60 | Bonyan Kala Chemie Co. | BAS 313 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 600-1000 stoke at 25°C and is mainly used...展开 BAS 313 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 600-1000 stoke at 25°C and is mainly used in nitro-cellulose paints, alkyd amin lacquers, and anti-corrosion primers. 收起 | |
| BECKOCOAT® PU 428/51XMPAC | Allnex | Beckocoat® PU 428/51XMPAC is a light stabilized, oil-free, moisture curing one-component polyurethane resin. It's used in floor sealers, wood coating, concrete impregnation, and as crosslinkers for alkyd resins in two-component systems. | Request Sample |
| BECKOCOAT® VPU 4204/40LG | Allnex | Beckocoat® VPU 4204/40LG is a flat, moisture curing one-component polyurethane resin. It's used for floor sealers, wood paints and concrete impregnation sealers. | Request Sample |
| BECKOPOX™ EH 2166w/80WA | Allnex | BECKOPOXTM EH 2166w/80WA is an aliphatic polyamine adduct. It is used together with solid epoxy resin dispersions or emulsified liquid resins. | Request Sample |
| BECKOPOX™ EH 613w/80WA | Allnex | 水性不含乙酸的脂肪族多胺加合物。高反应性固化剂，用于矿物金属基材用水稀释涂料，其中快速固化和水释放性能很重要 | Request Sample |
| BECKOPOX™ EH 637 | Allnex | Beckopox® EH 637 is a cycloaliphatic polyamine adduct with very low viscosity, for use together with liquid epoxy resins for flooring compounds with good chemical resistance and low yellowing tendency. | Request Sample |
| BECKOPOX™ EM 2120w/45WA | Allnex | BECKOPOX® EM 2120W/45WA is an epoxy-amine-adduct dispersion in water, containing very small amounts of organic co-solvent. BECKOPOX® EM 2120W/45WA is suited to formulate water borne 1 pack anticorrosive primers and 1 pack single coats with good anticorros...展开 BECKOPOX® EM 2120W/45WA is an epoxy-amine-adduct dispersion in water, containing very small amounts of organic co-solvent. BECKOPOX® EM 2120W/45WA is suited to formulate water borne 1 pack anticorrosive primers and 1 pack single coats with good anticorrosive properties, especially on smooth steel. 收起 | Request Sample |
| BECKOPOX™ EM 460/60IBX | Allnex | 对于钢铁和非铁金属具有出色的附着力，高防腐保护性能和最佳的重涂性 | Request Sample |
| BECKOPOX™ EP 116 | Allnex | Beckopox® EP 116 is a non-crystallizing liquid resin for coatings with high chemical-resistance, adhesives, trowelling, casting and laminating compounds. | Request Sample |
| BECKOPOX™ EP 117 | Allnex | Beckopox® EP 117 is a non-crystallizing, reactive diluted liquid resin for chemical-resistant coatings, concrete injections, adhesives, trowelling casting and laminating compounds. | Request Sample |
| BECKOPOX™ EP 128 | Allnex | 低粘度，液体环氧树脂，反应性稀释 | Request Sample |
| BECKOPOX™ EP 140 | Allnex | 液体树脂，具有高耐化学品性能，用于涂料、胶粘剂、抹灰、浇铸和层合材料 | Request Sample |
| BECKOPOX™ EP 140/80SNB | Allnex | 液体环氧树脂 | Request Sample |
| BECKOPOX™ EP 147w | Allnex | 100％固体含可水稀释环氧的反应性表面活性剂 | Request Sample |
| BECKOPOX™ EP 2340w/56WA | Allnex | BECKOPOX® EP 2340W/56WA is serving for trial purposes only. Deviations which might occur during transfer into manufacturing in a commercial scale are possible and do not constitute any material defect. | Request Sample |
| BECKOPOX™ EP 2350w/60WA | Allnex | Beckopox® EP 2350W/60WA is a solid epoxy resin dispersion in water with improved chemical resistance. | Request Sample |
| BECKOPOX™ EP 2384w/57WA | Allnex | Beckopox EP 2384w是一款A剂固体环氧树脂的水分散液。可以和 Beckopox EH 623w, EH 659w, VEH 2188w , VEH 2177w 等环氧固化剂配套使用，适合金属或矿物表面。其快干特性让在一天内进行多次涂层施工成为可能。 | Request Sample |
| BECKOPOX™ EP 2392w/70MP | Allnex | Beckopox® EP 2392w/70MP is a flexibilized, water-emulsifiable, solid epoxy resin that is diluted in methoxypropanol. This solution can be easily emulsified with water in a high-speed mixer to achieve a stable dispersion. This product is used to formulate ...展开 Beckopox® EP 2392w/70MP is a flexibilized, water-emulsifiable, solid epoxy resin that is diluted in methoxypropanol. This solution can be easily emulsified with water in a high-speed mixer to achieve a stable dispersion. This product is used to formulate anticorrosive primers, singular topcoats, due to its water-free form of delivery this product is very well suited for processing of water-sensitive pigments like zinc dust, such zinc-rich primers exhibit outstanding anti-corrosive properties. 收起 | Request Sample |
| BECKOPOX™ EP 301/75X | Allnex | 用于溶剂型涂料，具有良好的耐化学品和耐腐蚀性能，包括镀锌涂料和高耐候涂料 | Request Sample |
| BECKOPOX™ EP 384w/53WAMP | Allnex | 固体树脂－1类－乳液，可结合可用水乳化的液体树脂用于快干涂料，更适合应用于矿物底材 | Request Sample |
| BECKOPOX™ EP 385w/56WA | Allnex | 固体环氧树脂，柔韧，可分散于水中。配方对于各种塑胶PC, PA, PUR和UP-层合材料具有良好的附着力 | Request Sample |
| BECKOPOX™ EP 386w/52WA | Allnex | 内部增塑的固体树脂－1类乳液，具有改善的剪切稳定性，例如用于水性快干抗腐蚀塑胶底漆和涂料 | Request Sample |
| BECKOPOX™ EP 387w/52WA | Allnex | BECKOPOX® EP 387w/52WA是一个柔韧的固体环氧树脂。它适用于腐蚀保护底漆，对大多数金属基材具有非常好的附着力。它也适用于金属基材的单涂层和装饰体系。为了优化防腐蚀保护性能，推荐固化剂量为75％，按化学计量。 | Request Sample |
| BECKOPOX™ VEM 2448/50EEP | Allnex | Beckopox® VEM 2448/50EEP is a modified, carboxylated epoxy resin, self cross-linking. It's a sole binder for white and clear interior and exterior can-coating systems, stamping enamels, capsule lacquers, foil lacquers and coil-coating primers with outstan...展开 Beckopox® VEM 2448/50EEP is a modified, carboxylated epoxy resin, self cross-linking. It's a sole binder for white and clear interior and exterior can-coating systems, stamping enamels, capsule lacquers, foil lacquers and coil-coating primers with outstanding resistances. 收起 | Request Sample |
| BECKOPOX™ VEP 2381w/55WA | Allnex | 环氧水性乳液，1001型环氧乳液，用于水性面漆、底漆和DTM涂料 | Request Sample |
| BECKOPOX™ VEP 2382w/55WA | Allnex | 环氧水性乳液 | Request Sample |
| BUP 612 | Bonyan Kala Chemie Co. | BUP 612 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a ...展开 BUP 612 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 550-750CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 615 | Bonyan Kala Chemie Co. | BUP 615 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, and good physical and mechanical properties after curing. This product has a viscosity of 380-480CP at 25°C and is commonly used in ...展开 BUP 615 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, and good physical and mechanical properties after curing. This product has a viscosity of 380-480CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 620 | Bonyan Kala Chemie Co. | BUP 620 is an unsaturated polyester resin that is used for its low color, excellent adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a visc...展开 BUP 620 is an unsaturated polyester resin that is used for its low color, excellent adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 400-650CP at 25°C and is commonly used in general purpose applications and goods that need high transparency. 收起 | |
| BUP 621 | Bonyan Kala Chemie Co. | BUP 621 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity...展开 BUP 621 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 380-480CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 623 | Bonyan Kala Chemie Co. | BUP 623 is an unsaturated polyester resin that is used for its good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited shrinkage, and filler appropriate accountability properties. This product has a v...展开 BUP 623 is an unsaturated polyester resin that is used for its good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited shrinkage, and filler appropriate accountability properties. This product has a viscosity of 500-700CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 624 | Bonyan Kala Chemie Co. | BUP 624 is an unsaturated polyester resin that is used for its low color, medium viscosity, good physical and mechanical properties after curing, resistant to UV, and filler appropriate accountability properties. This product has a viscosity of 450-700CP ...展开 BUP 624 is an unsaturated polyester resin that is used for its low color, medium viscosity, good physical and mechanical properties after curing, resistant to UV, and filler appropriate accountability properties. This product has a viscosity of 450-700CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 625 | Bonyan Kala Chemie Co. | BUP 625 is an unsaturated polyester resin that is used for its medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 350-500CP at 25°C and is commonly use...展开 BUP 625 is an unsaturated polyester resin that is used for its medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 350-500CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 626 | Bonyan Kala Chemie Co. | BUP 626 is an unsaturated polyester resin that is used for its low color, limited water absorption, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of ...展开 BUP 626 is an unsaturated polyester resin that is used for its low color, limited water absorption, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 450-650CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 629 | Bonyan Kala Chemie Co. | BUP 629 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosit...展开 BUP 629 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 700-1000CP at 25°C and is commonly used in general purpose applications and goods that need high transparency. 收起 | |
| BUP 630 | Bonyan Kala Chemie Co. | BUP 630 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, resistant to hydrolysis, and good flexibility and go...展开 BUP 630 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, resistant to hydrolysis, and good flexibility and good resistant to impact. This product has a viscosity of 450-700CP at 25°C and is commonly used in general purpose applications and gel coats. 收起 | |
| BUP 631 | Bonyan Kala Chemie Co. | BUP 631 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product ha...展开 BUP 631 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a viscosity of 700-1000CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 640 | Bonyan Kala Chemie Co. | BUP 640 is an unsaturated polyester resin that is used for its low gel time, low color, high viscosity, good physical and mechanical properties after curing, and good flexibility and good transparency. This product has a viscosity of 1200-1700CP at 25°C a...展开 BUP 640 is an unsaturated polyester resin that is used for its low gel time, low color, high viscosity, good physical and mechanical properties after curing, and good flexibility and good transparency. This product has a viscosity of 1200-1700CP at 25°C and is commonly used in general purpose applications and goods that need high transparency. 收起 | |
| BUP 643 | Bonyan Kala Chemie Co. | BUP 643 is an unsaturated polyester resin that is used for its low gel time, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistance to impact. This product has a viscosity of 900-1500CP at 25°C and...展开 BUP 643 is an unsaturated polyester resin that is used for its low gel time, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistance to impact. This product has a viscosity of 900-1500CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 660 | Bonyan Kala Chemie Co. | BUP 660 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a visc...展开 BUP 660 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a viscosity of 600-900CP at 25°C and is commonly used in general purpose applications and gel coats. 收起 | |
| BUP 665 | Bonyan Kala Chemie Co. | BUP 665 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a visc...展开 BUP 665 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a viscosity of 800-1200CP at 25°C and is commonly used in general purpose applications and gel coats. 收起 | |
| BUP 690 | Bonyan Kala Chemie Co. | BUP 690 is an unsaturated polyester resin that is used for its moderate gel time, low viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 300-450CP at 25°C and ...展开 BUP 690 is an unsaturated polyester resin that is used for its moderate gel time, low viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 300-450CP at 25°C and is commonly used in general purpose applications. 收起 | |
| CRYLCOAT® 1501-6 | Allnex | 高反应活性羧基聚酯树脂，可用于制备50/50混合型粉末涂料。该树脂设计用于与低粘度环氧树脂一起使用，适合用于制备低温至130°C固化的MDF基材用涂料。基于该产品的涂料兼具良好的流平性、高光泽和耐化学品性能 | Request Sample |
| CRYLCOAT® 1506-0 | Allnex | CRYLCOAT® 1506-0 is a highly reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. Formulations based on CRYLCOAT® 1506-0 exhibit good overbake and solvent resistance, good mechanical properties and very good flo...展开 CRYLCOAT® 1506-0 is a highly reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. Formulations based on CRYLCOAT® 1506-0 exhibit good overbake and solvent resistance, good mechanical properties and very good flow. 收起 | Request Sample |
| CRYLCOAT® 1510-0 | Allnex | CRYLCOAT® 1510-0 is a carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. Coatings based on CRYLCOAT® 1510-0 exhibit excellent flow, high gloss, and excellent wetting of fillers and pigments. | Request Sample |
| CRYLCOAT® 1514-2 | Allnex | 中等反应活性的羧基树脂，设计用于50/50混合型粉末涂料。具有良好的流平和出色的耐过烘烤性能 | Request Sample |
| CRYLCOAT® 1540-0 | Allnex | 高反应活性羧基聚酯树脂，以50/50制备混合型粉末涂料。具有出色的流平性和高光泽，以及良好的填料和颜料润湿性。用于需要润湿的应用场合和器械应用 | Request Sample |
| CRYLCOAT® 1544-0 | Allnex | CRYLCOAT® 1544-0 is a low reactive carboxyl functional polyester resin for use in the manufacture of 50/50 or 60/40 hybrid powder coatings. CRYLCOAT® 1544-0 is compatible with other carboxyl functional polyester resins and can be blended in all ratios to ...展开 CRYLCOAT® 1544-0 is a low reactive carboxyl functional polyester resin for use in the manufacture of 50/50 or 60/40 hybrid powder coatings. CRYLCOAT® 1544-0 is compatible with other carboxyl functional polyester resins and can be blended in all ratios to provide intermediate reactivity. 收起 | Request Sample |
| CRYLCOAT® 1570-0 | Allnex | CRYLCOAT® 1570-0 is a medium reactive carboxyl functional polyester resin for use in the production of 50/50 hybrid powder coatings with good flow out and high flexibility if cured at approx. 5-7 min at 180°C. | Request Sample |
