| A-25 Anatase Pigment | CPM Industries, Inc. | A-25 Anatase Pigment is an anatase titanium dioxide pigment that is easily dispersed in aqueous applications and available in powder or granular form. This product is ideal for application in chalking paints, concrete curing compounds, and electro-ceramic...展开 A-25 Anatase Pigment is an anatase titanium dioxide pigment that is easily dispersed in aqueous applications and available in powder or granular form. This product is ideal for application in chalking paints, concrete curing compounds, and electro-ceramics. It has a purity of 98% min. and a mean particle size in the range of 0.25 to 0.30 microns. 收起 | |
| A-300F Anatase | CPM Industries, Inc. | A-300F Anatase is ideal for application in polyamide, polyester, and cellulose-viscose fibers. This product has a purity of 98% min. and a particle size distribution around an average of 0.3 microns specifically designed for use in synthetic fiber deluste...展开 A-300F Anatase is ideal for application in polyamide, polyester, and cellulose-viscose fibers. This product has a purity of 98% min. and a particle size distribution around an average of 0.3 microns specifically designed for use in synthetic fiber delustering. 收起 | |
| Acrolite Fast HP Red 193 (Yellowish) | Pidilite Industries Ltd. - Pigments Division | 不透明、黄相红色高性能颜料。相比Acrolite Fast HP Red 195，它更加不透明，稍微偏黄相；而相比Acrolite Fast HP Red P5B颜色更黄。可在各种浓度下使用，具有杰出的牢度。可结合无机、其它有机颜料以提高性能 | |
| Acrolite Fast Orange HPL | Pidilite Industries Ltd. - Pigments Division | 红相不透明类型的橙色颜料，相比13号橙，具有良好的流平和总体较好的牢度性能 | |
| Acrolite Fast Red BBY (Transparent) | Pidilite Industries Ltd. - Pigments Division | 具有出色的白度，非常好的耐光性和很好的颜料级耐化学品性能。最适合用于自干醇酸漆。由于它具有低粘度，因而可以添加更高比例的颜料量 | |
| Acrolite Fast Red FGP | Pidilite Industries Ltd. - Pigments Division | 具有出色的白度，非常好的耐光性和很好的颜料级耐化学品性能。最适合用于自干醇酸漆。由于它具有低粘度，因而可以添加更高比例的颜料量 | |
| Acrolite Fast Red P5B (Bluish) | Pidilite Industries Ltd. - Pigments Division | 该产品的应用领域包括着色剂、自干漆、烤漆、粉末涂料、水泥涂料、汽车修补漆和卷钢涂料 | |
| Acrolite Fast Red PF3S-07 | Pidilite Industries Ltd. - Pigments Division | 不透明、鲜艳的黄色萘酚红色颜料，具有良好的牢度性能和良好的流变性能。高度推荐用于染色剂和工业漆中 | |
| Acrolite Fast Red PRS (Semi Transparent) | Pidilite Industries Ltd. - Pigments Division | 具有出色的白度，非常好的耐光性和很好的颜料级耐化学品性能。最适合用于自干醇酸漆。由于它具有低粘度，因而可以添加更高比例的颜料量 | |
| Acrolite Fast Violet EXC (Reddish) | Pidilite Industries Ltd. - Pigments Division | 高着色力蓝相颜料，具有良好的耐光耐候性。适合所有类型的油漆。尤其适合用于调整绿相酞菁蓝颜料至红相，并用于白色油漆着色 | |
| Acrolite Fast Violet NM (Bluish) | Pidilite Industries Ltd. - Pigments Division | 它具有出色的耐光和耐候性和柔软的纹理，出色的可分散性和高着色力 | |
| Acrolite Fast Yellow 5GX | Pidilite Industries Ltd. - Pigments Division | 黄色颜料，用于水性和自干漆，具有相对较高的着色力。由于高起霜风险，它不适合用于烤漆 | |
| Acrolite Fast Yellow 7400C | Pidilite Industries Ltd. - Pigments Division | 黄色颜料，作为一种有机物，它具有良好的遮盖力。具有良好的耐光耐候性，适用于自干漆。由于它具有良好的流变性能。它可在高浓度下使用而不会影响光泽 | |
| Acrolite Fast Yellow HPX 07 (Opaque) | Pidilite Industries Ltd. - Pigments Division | 高遮盖力，红相黄色二芳基黄色颜料，深色相时具有非常好的耐光耐候性。用于油漆体系具有非常低的粘度。它适用于各种类型的油漆，由于它具有低粘度，因而可使用更高比例的颜料量。它是非常有用的有机颜料，可用于所有体系中替代不含铅或低铅含量油漆配方 | |
| Acrolite Fast Yellow PRI (Semi-Transparent) | Pidilite Industries Ltd. - Pigments Division | 该产品的应用领域包括着色剂、自干漆、烤漆、粉末涂料、水泥涂料和汽车修补漆 | |
| Acrolite HP Pink PE (Bluish) | Pidilite Industries Ltd. - Pigments Division | 红色颜料，在各种浓度下均具有高着色力和杰出的耐光耐候性。它具有非常好的抗絮凝稳定性，良好的流变性和良好的光泽。尤其适合作为遮蔽颜料用于红色汽车涂料和作为组合颜料用于红色金属和珠光效果漆中。 | |
| Acrolite HP Pink PEY (Yellowish) | Pidilite Industries Ltd. - Pigments Division | 红色颜料，在各种浓度下均具有高着色力和杰出的耐光耐候性。它具非常好的抗絮凝稳定性，良好的流变性和良好的光泽。尤其适合作为遮蔽颜料用于红色汽车涂料和作为组合颜料用于红色金属和珠光效果漆中。A.HP Pink PEY比PE色调上更黄一些 | |
| Acrolite HP Red P5B | Pidilite Industries Ltd. - Pigments Division | 蓝相透明，具有更佳的着色力，但是相比不透明产品具有较差的耐光性和耐候性。它可结合无机或有机颜料获得纯红色相 | |
| CA-106 TiO2 | Boom Industry (SH) Co., Ltd. | CA-106 TiO2 is an uncoated anatase titanium dioxide pigment derived from a sulfuric acid process. This product has a blue hue that shows more after pigmentation, additional brightness, high chromatic of heavy metal, and good water dispersion. It can be ap...展开 CA-106 TiO2 is an uncoated anatase titanium dioxide pigment derived from a sulfuric acid process. This product has a blue hue that shows more after pigmentation, additional brightness, high chromatic of heavy metal, and good water dispersion. It can be applied to carpentry, signpost and indoor metope latex paint. 收起 | |
| CR-330 TiO2 | Boom Industry (SH) Co., Ltd. | CR-330 TiO2 is a rutile titanium dioxide pigment absent of organic surface processed coating treatment. This product is noted for good hiding power, dispersion and stability, and it can be used in coatings. | |
| EXOCOAT™ 143 | Axcentive Sarl | EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS ...展开 EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS as well as to old coating layers. It covalently bonds with the substrate resulting in a very durable finish. It can be used as a standalone resin or might be formulated with other raw materials like white and colored pigments, organic resins, fillers, and additives. The use of water-based raw materials should be avoided. Durability is a unique feature of EXOCOAT® 143. It can sustain mechanical abrasion, and chemical attack and is UV stable. When applied at a very low layer thickness of 0.5 to 2µm it provides the surface with a protective hard coating that shows durable easy-to-clean, dirt resistance, anti-graffiti, and strong water repellency properties. It is suitable for ambient or force-cured, high-performance industrial coatings such as protective, coil, marine, and automotive. EXOCOAT® 143-based paints may be brushed, rolled, or sprayed by HVLP or airless spray. 收起 | |
| EXOCOAT™ 151A | Axcentive Sarl | EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...展开 EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151A. It can be used as a general air purifier. Though most effective in outdoor light conditions, it is adapted for use under visible light as found in the interior. In all cases, it should be used as a topcoat to ensure its full effect. Glass and walls coated with EXOCOAT® 151A are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It may be used on other flat surfaces such as plastics or coated substrates yet only interior. It dries under room temperature conditions. Spray application is recommended to reach thin monolayers which prove to be more effective. It is listed with EINECS. TSCA, AICS, and CEPA. 收起 | |
| EXOCOAT™ 151B | Axcentive Sarl | EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...展开 EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151B. In all cases, it should be used as a topcoat to ensure its full effect. EXOCOAT® 151B coated walls are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It is targeted for porous substrates like concrete, brickwork, and gypsum. It is not meant for glass substrates. It dries under room temperature conditions. Brush, roller, or Spray application is recommended to reach homogeneous coatings. It is listed with EINECS. TSCA, AICS, and CEPA. 收起 | |
| EXOCOAT™ 161 | Axcentive Sarl | EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extre...展开 EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extreme hardness (9H). Offers chemical-, scratch-, oxidation resistance, and temperature resistance over 1000°C for prolonged time. It can function as stand-alone resin at a layer thickness of 0.5 to 2 µm to form a durable finish that can be easy to clean. It bonds to substrates such as steel, aluminum, glass, and old coating layers. It can be used as conversion coating replacing Cr(VI). It may be co-formulated with the most frequently used coating ingredients from the group of pigments, fillers, resins, additives, and (co-)solvents and creates colored, super hard, or matte surfaces. EXOCOAT® 161 is highly advised to be used in aprotic solvents. It has a shelf life of 6 months. 收起 | |
| EXOCOAT™ AC | Axcentive Sarl | EXOCOAT® AC by Axcentive is a hybrid sol-gel resin for anti-corrosive conversion coatings in 60% ethanol. It is covalently bonded to the surface and applied directly to metal (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). ...展开 EXOCOAT® AC by Axcentive is a hybrid sol-gel resin for anti-corrosive conversion coatings in 60% ethanol. It is covalently bonded to the surface and applied directly to metal (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It functions as a replacement for the Cr3+ and Cr6+ based system as used in metal plating and automotive industries. It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It can also be used as micrometer-thin primers under conventional organic coatings. It can be overcoated by epoxy primer or polyurethane topcoat systems. EXOCOAT® AC is suitable for conventional low & high pressure airless and air-mixing spraying, dipping, rolling, and brushing. It has a shelf life of 12 months. 收起 | |
| EXOCOAT™ ACX-W | Axcentive Sarl | EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless ...展开 EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It is used as a replacement for chromium-based primers on aluminum and other metals. It can be used as a conversion primer for a coating system based on an epoxy coating and polyurethane topcoat. It may omit toxic chemicals and functions as a replacement for Cr3+ and Cr6+-based systems used in metal plating and aerospace industries. EXOCOAT® ACX-W is applied with conventional low-pressure and high-pressure airless and air-mix spraying, dipping, rolling and brushing. It has a shelf life of 12 months. 收起 | |
| EXOCOAT™ AM | Axcentive Sarl | EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down v...展开 EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down viruses and bacteria. It eradicates viruses such as influenza, SARS-COV-2, dengue & hepatitis and bacteria such as E. coli, MSRA, streptococcus, listeria, pneumonia, and salmonella. It is activated by light and displays quick drying at room temperature. Spray application is recommended to reach thin monolayers. It exhibits curing at room temperature up to 300°C and super hard particles (1GPa Vickers). It is easy to apply & durable, allowing longer disinfection intervals while preserving hygiene level. It shows non-silver leaching, efficacious even under low light conditions, lower service frequency, and no need for frequent disinfection routine. It is used in the state-of-the-art continuous antimicrobial coating for high-traffic areas. EXOCOAT® AM is suitable for topcoats for any surface inside buildings, stores, hospitals, and vehicles. The shelf life of this product is 9 months. 收起 | |
| EXOCOAT™ Clearview | Axcentive Sarl | EXOCOAT® Clearview by Axcentive is a 1K hybrid sol-gel system in ethanol. It has been designed for water-repellent, easy-to-clean coatings for glass and ceramic substrates. A substrate coated with EXOCOAT® Clearview will turn into a hard, water-repellent ...展开 EXOCOAT® Clearview by Axcentive is a 1K hybrid sol-gel system in ethanol. It has been designed for water-repellent, easy-to-clean coatings for glass and ceramic substrates. A substrate coated with EXOCOAT® Clearview will turn into a hard, water-repellent durable easy-to-clean surface. EXOCOAT® Clearview keeps windscreens clean from raindrops and improves vision drastically, especially in difficult wet road conditions, which can be experienced day and night. Besides, it can be used to make easy-to-clean, water shedding tiles and chrome for example used in kitchens and bathrooms. 收起 | |
| EXOCOAT™ Clearview-2 | Axcentive Sarl | EXOCOAT® Clearview-2 by Axcentive is a 2K hybrid sol-gel in ethanol. It is designed for durable water repellent, easy-to-clean, dirt resistant glass coatings. This solvent-based nanosystem can be applied in coatings for automotive windscreens, or glass ba...展开 EXOCOAT® Clearview-2 by Axcentive is a 2K hybrid sol-gel in ethanol. It is designed for durable water repellent, easy-to-clean, dirt resistant glass coatings. This solvent-based nanosystem can be applied in coatings for automotive windscreens, or glass bathroom doors. It can be applied as such or diluted, in coatings as a monolayer to obtain a very hard and durable hydrophobic surface. EXOCOAT® Clearview-2 keeps windows clean from raindrops and improves vision drastically, especially in difficult wet road conditions, which can be experienced day and night. In bathroom glass, it makes the water run down fast and avoids water spots. 收起 | |
| EXOCOAT™ SH | Axcentive Sarl | EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pave...展开 EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pavement, walls, and stucco to get the so-called Lotus Effect. The sol-gel system deposits superhydrophobic particles on the porous substrate. EXOCOAT® SH will not form a film and as a result, the wall stays breathable. With the contact angle of 145o water droplets bounce back from the surface and will roll down immediately upon touch. Thus, the wall remains dry, and clean and will behave as an efficient barrier against water. 收起 | |
| Iron Oxide Black | Tongling Rely Technology Co., Ltd. | Iron Oxide Black is an iron oxide pigment that contains saturated blue light black ink with high hiding power, tinting strength, alkali resistance and lightfastness. This product is often used in paint applications. | |
| Iron Oxide Blue | Tongling Rely Technology Co., Ltd. | Iron Oxide Blue is a dark and light blue pigment powder that has an oil absorption of 15-30% and a moisture content of 1%. This product is used for strong and bright coloring in paint and ink applications. | |
| Iron Oxide Brown | Tongling Rely Technology Co., Ltd. | Iron Oxide Brown is an iron oxide pigment with strong adaptability to other iron oxide pigments. This product is used for coloring in paint applications. | |
| Iron Oxide Green | Tongling Rely Technology Co., Ltd. | Iron Oxide Green is a green iron oxide organic pigment made by coupling a variety of additives composite pigments. This product provides strong and bright coloring to colored paint applications. | |
| Iron Oxide Red | Tongling Rely Technology Co., Ltd. | Iron Oxide Red is a red iron oxide and inorganic color pigment that contains high hiding power, strong tinting strength, good dispersibility, light resistance and weather resistance. This product is commonly used in paint applications. | |
| Iron Oxide Yellow | Tongling Rely Technology Co., Ltd. | Iron Oxide Yellow is an iron oxide pigment of relatively stable chemical properties of alkaline oxides. This product provides a pure and bright yellow color of iron with good weather resistance and hiding power. It is commonly used in ink applications. | |
| Magnesium Stearate | Dongguan CHNV New Material Technology Co., Ltd. | Magnesium Stearate is used as a transparent and flatting agent for paints. It also has lubricating, antisticking, and flow-aidding properties that allow it to be used as a lubricant or anti-sticking agent for tablets or capsules. Magnesium Stearate can be...展开 Magnesium Stearate is used as a transparent and flatting agent for paints. It also has lubricating, antisticking, and flow-aidding properties that allow it to be used as a lubricant or anti-sticking agent for tablets or capsules. Magnesium Stearate can be used in paints. 收起 | |
| R-1 Rutile Powder | CPM Industries, Inc. | R-1 Rutile Powder is a non-pigment rutile titanium dioxide powder that exhibits relatively high surface area. This product is a 99.0% minimum purity powder with a mean particle size of 3 to 5 microns. It is ideal for use in the production of electro-ceram...展开 R-1 Rutile Powder is a non-pigment rutile titanium dioxide powder that exhibits relatively high surface area. This product is a 99.0% minimum purity powder with a mean particle size of 3 to 5 microns. It is ideal for use in the production of electro-ceramics, specialty glass, fiberglass, engineered ceramics, and coated welding rods. 收起 | |
| R-500 Rutile Pigment | CPM Industries, Inc. | R-500 Rutile Pigment is a rutile titanium dioxide pigment that is ideal for application in water and solvent based systems requiring limited weathering resistance.This product is often used in applications including interior coatings, road marking paint, ...展开 R-500 Rutile Pigment is a rutile titanium dioxide pigment that is ideal for application in water and solvent based systems requiring limited weathering resistance.This product is often used in applications including interior coatings, road marking paint, and powder coatings. It is a multipurpose pigment with a 98% minimum TiO2 content and no surface treatment. 收起 | |
| R-501 Rutile Pigment | CPM Industries, Inc. | R-501 Rutile Pigment is a rutile titanium dioxide pigment that provides good whiteness, hiding power, and limited weathering resistance in trade sales paint and road marking paint. This product contains 98% minimum TiO2 plus an organic surface treatment t...展开 R-501 Rutile Pigment is a rutile titanium dioxide pigment that provides good whiteness, hiding power, and limited weathering resistance in trade sales paint and road marking paint. This product contains 98% minimum TiO2 plus an organic surface treatment to ease dispersion in solvent based systems. 收起 | |
| R-502 Rutile Pigment | CPM Industries, Inc. | R-502 Rutile Pigment is a rutile titanium dioxide pigment that provides good whiteness and hiding power with applications in water based enamel paints requiring limited weathering resistance. This product contains 98% minimum TiO2 plus an organic surface ...展开 R-502 Rutile Pigment is a rutile titanium dioxide pigment that provides good whiteness and hiding power with applications in water based enamel paints requiring limited weathering resistance. This product contains 98% minimum TiO2 plus an organic surface treatment to ease dispersion in water based systems. 收起 | |
| R-601 Rutile Pigment | CPM Industries, Inc. | R-601 Rutile Pigment is a rutile titanium dioxide pigment that is ideal for use in solvent based printing inks, powder coatings, and exterior coatings. This product is a multipurpose pigment with a 93% minimum TiO2 content plus alumina and silica inorgani...展开 R-601 Rutile Pigment is a rutile titanium dioxide pigment that is ideal for use in solvent based printing inks, powder coatings, and exterior coatings. This product is a multipurpose pigment with a 93% minimum TiO2 content plus alumina and silica inorganic and amphiphilic organic surface treatments. 收起 | |
| R-602 Rutile Pigment | CPM Industries, Inc. | R-602 Rutile Pigment is a rutile titanium dioxide pigment that is ideal for use in water based paints. This product contains 93% minimum TiO2 with silica and alumina inorganic and hydrophilic organic surface treatments. | |
| R-606 Rutile Universal Pigment | CPM Industries, Inc. | R-606 Rutile Universal Pigment is a rutile titanium dioxide pigment that is ideal for application in paints, coatings and inks. This product contains 93% minimum TiO2 plus aluminum and zirconium surface treatments. It is a universal pigment designed for s...展开 R-606 Rutile Universal Pigment is a rutile titanium dioxide pigment that is ideal for application in paints, coatings and inks. This product contains 93% minimum TiO2 plus aluminum and zirconium surface treatments. It is a universal pigment designed for superior durability and stability, high gloss and opacity, and excellent dispersibility. 收起 | |
| R-730 TiO2 | Boom Industry (SH) Co., Ltd. | R-730 TiO2 is a stable universal rutile titanium dioxide used for its versatility, durability, hiding power and gloss. This product can be applied to senior industrial coating that requires high weather resistance, paints and inks. | |
| R-750 TiO2 | Boom Industry (SH) Co., Ltd. | R-750 TiO2 is a general-purpose product created through a sulfuric acid production process. This product has good dispersion, hiding power, weather resistance and other characteristics. It is commonly used in interior and exterior paints and inks. | |
| R-760 TiO2 | Boom Industry (SH) Co., Ltd. | R-760 TiO2 is a general-purpose rutile titanium dioxide than can be easily scattered, moistened or mixed with other resins. This product provides weather resistance, hiding power, anti-chalking property and yellowing resistance in industrial paints, print...展开 R-760 TiO2 is a general-purpose rutile titanium dioxide than can be easily scattered, moistened or mixed with other resins. This product provides weather resistance, hiding power, anti-chalking property and yellowing resistance in industrial paints, printing inks and different kinds of coatings. 收起 | |
| R-98 TiO2 | Boom Industry (SH) Co., Ltd. | R-98 TiO2 is a chlorination rutile pigment derived from chlorination and oxidation of silicon. This product has good weather resistance, excellent stability and high dispersibility. It is commonly used in coatings and printing inks. | |
| Zinc Stearate for Coating and Paint | Dongguan CHNV New Material Technology Co., Ltd. | Zinc Stearate for Coating and Paint provides advantages such as low fatty acid, high purity, good transparency, super-fineness, dispersing, and more. Zinc Stearate for Coating and Paint is widely applied in furniture coating, upscale ink, automotive coati...展开 Zinc Stearate for Coating and Paint provides advantages such as low fatty acid, high purity, good transparency, super-fineness, dispersing, and more. Zinc Stearate for Coating and Paint is widely applied in furniture coating, upscale ink, automotive coating, marine coating, powder coating, plastics, polymer resin, fiber rubber, paper, cosmetics, powder metallurgy, and cement product industries. 收起 |
