| EBECRYL® 83 | Allnex | EBECRYL® 83 is an amine modified polyester acrylate that exhibits low viscosity and fast cure via exposure to ultraviolet light (UV). Films of EBECRYL® 83 cured by UV or electron beam (EB) demonstrate high gloss, solvent resistance and low residual odor. ...展开 EBECRYL® 83 is an amine modified polyester acrylate that exhibits low viscosity and fast cure via exposure to ultraviolet light (UV). Films of EBECRYL® 83 cured by UV or electron beam (EB) demonstrate high gloss, solvent resistance and low residual odor. It is especially suited to applications requiring low viscosity and fast UV cure, including overprint varnishes and flexographic inks. 收起 | Request Sample |
| EBECRYL® 830 | Allnex | Ebecryl® 830 is a 100% solids hexafunctional polyester acrylate oligomer. When cured by ultraviolet light or electron beam, films of Ebecryl® 830 exhibit high abrasion resistance, solvent resistance and hardness. This resin was developed for coatings and ...展开 Ebecryl® 830 is a 100% solids hexafunctional polyester acrylate oligomer. When cured by ultraviolet light or electron beam, films of Ebecryl® 830 exhibit high abrasion resistance, solvent resistance and hardness. This resin was developed for coatings and inks on wood, paper and plastics. 收起 | Request Sample |
| EBECRYL® 8301-R | Allnex | EBECRYL® 8301-R is a hexafunctional aliphatic urethane acrylate that provides extremely fast cure response when exposed to ultraviolet light (UV) or electron beam (EB). Cured films of EBECRYL® 8301-R exhibit high hardness, scratch and chemical resistance,...展开 EBECRYL® 8301-R is a hexafunctional aliphatic urethane acrylate that provides extremely fast cure response when exposed to ultraviolet light (UV) or electron beam (EB). Cured films of EBECRYL® 8301-R exhibit high hardness, scratch and chemical resistance, and are resistant to yellowing. It is recommended for: scratch resistant coatings on plastic, wood coatings and fillers, and a modifying oligomer to improve cure speed, solvent resistance, and gloss of a wide variety of coatings and inks. 收起 | Request Sample |
| EBECRYL® 8311 | Allnex | EBECRYL® 8311 is an aliphatic urethane acrylate nanocomposite that exhibits low viscosity and high reactivity in ultraviolet (UV) light or electron beam (EB) curable coatings. Films of EBECRYL® 8311 exhibit good weatherability, outstanding hardness, chemi...展开 EBECRYL® 8311 is an aliphatic urethane acrylate nanocomposite that exhibits low viscosity and high reactivity in ultraviolet (UV) light or electron beam (EB) curable coatings. Films of EBECRYL® 8311 exhibit good weatherability, outstanding hardness, chemical, and scratch and abrasion resistance coupled with very low haze development after abrasion. EBECRYL® 8311 is recommended for: coatings requiring high scratch/abrasion resistance and improved adhesion, coatings requiring low development after abrasion resistance, and as a modifying oligomer to increase cure speed, solvent resistance and abrasion resistance. 收起 | Request Sample |
| EBECRYL® 8314 | Allnex | EBECRYL® 8314 an aliphatic urethane tetraacrylate diluted in IBOA & HPMA. After ultraviolet light (UV) or electronic beam (EB) curing, it exhibits an outstanding toughness & resiliency, and abrasion resistance coupled with outstanding exterior durability ...展开 EBECRYL® 8314 an aliphatic urethane tetraacrylate diluted in IBOA & HPMA. After ultraviolet light (UV) or electronic beam (EB) curing, it exhibits an outstanding toughness & resiliency, and abrasion resistance coupled with outstanding exterior durability properties. It is particularly suitable for paint protection & automotive interior films, and small to medium draws thermoforming after cure. 收起 | Request Sample |
| EBECRYL® 8315 | Allnex | EBECRYL® 8315 an aliphatic urethane tetraacrylate diluted in HPMA. After ultraviolet light (UV) or electronic beam (EB) curing, it exhibits an outstanding toughness & resiliency, and abrasion resistance coupled with outstanding exterior durability propert...展开 EBECRYL® 8315 an aliphatic urethane tetraacrylate diluted in HPMA. After ultraviolet light (UV) or electronic beam (EB) curing, it exhibits an outstanding toughness & resiliency, and abrasion resistance coupled with outstanding exterior durability properties. It has self-healing properties of minor scratches. It is particularly suitable for paint protection & automotive interior films, and medium draws thermoforming after cure. 收起 | Request Sample |
| EBECRYL® 837 | Allnex | EBECRYL® 837 is a 100% solids multifunctional polyester acrylate oligomer. It is particularly useful in UV (ultraviolet) and EB (electron beam) curable inks and coatings where improved cure response, hardness and scratch/abrasion resistance are required. | Request Sample |
| EBECRYL® 8402 | Allnex | EBECRYL® 8402 is a low viscosity aliphatic urethane diacrylate. Films cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, toughness and excellent exterior durability. Low viscosity coatings or enhanced performance via increased...展开 EBECRYL® 8402 is a low viscosity aliphatic urethane diacrylate. Films cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, toughness and excellent exterior durability. Low viscosity coatings or enhanced performance via increased oligomer content are possible. It is recommended for use in: coatings for wood, coatings for plastics, flexographic inks, screen inks, and exterior durable coatings. 收起 | Request Sample |
| EBECRYL® 8405 | Allnex | EBECRYL® 8405 is an aliphatic urethane tetraacrylate diluted 20% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDODA). Films of EBECRYL® 8405 cured by ultraviolet light (UV) or electron beam (EB) combine abrasion resistance, flexibility, ...展开 EBECRYL® 8405 is an aliphatic urethane tetraacrylate diluted 20% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDODA). Films of EBECRYL® 8405 cured by ultraviolet light (UV) or electron beam (EB) combine abrasion resistance, flexibility, and adhesion with excellent exterior durability and resistance to yellowing. EBECRYL® 8405 is recommended for use in: automotive OEM or re-finish, coatings for wood and plastic requiring excellent exteriordurability, metal coatings, post-formable coatings for metal tube and conduit, optical coatings, non-yellowing topcoats for wood, pigmented coatings for wood, screen inks, and exterior durable coatings. 收起 | Request Sample |
| EBECRYL® 8411 | Allnex | EBECRYL® 8411 is an aliphatic urethane diacrylate diluted 20% by weight with the reactive diluent isobornyl acrylate (IBOA). Films of EBECRYL® 8411 cured by ultraviolet light (UV) or electron beam (EB) exhibit exceptional extensibility and flexibility, in...展开 EBECRYL® 8411 is an aliphatic urethane diacrylate diluted 20% by weight with the reactive diluent isobornyl acrylate (IBOA). Films of EBECRYL® 8411 cured by ultraviolet light (UV) or electron beam (EB) exhibit exceptional extensibility and flexibility, in addition to excellent abrasion resistance, good adhesion, exterior durability and resistance to yellowing. It is recommended for use in: screen inks for plastics, screen inks for lamination, thermoformable screen inks, coatings for metal, wood, paper and plastics, and coatings requiring exterior durability. 收起 | Request Sample |
| EBECRYL® 8413 | Allnex | EBECRYL® 8413 is designed as the pigment grind oligomer, for UV thermoformable ink applications, and should be used in conjunction with the letdown oligomer, EBECRYL® 1300. When used together with EBECRYL® 1300, non-blocking thermoformable inks can be dev...展开 EBECRYL® 8413 is designed as the pigment grind oligomer, for UV thermoformable ink applications, and should be used in conjunction with the letdown oligomer, EBECRYL® 1300. When used together with EBECRYL® 1300, non-blocking thermoformable inks can be developed. These thermoformable inks demonstrate scratch and temperature resistance, as well as excellent adhesion to a variety of plastic substrates without the necessity of corona discharge or flame pretreatment. Formulated products containing EBECRYL 8413 may be applied via flat bed screen methods and are recommended for use in: displays / signage / POP, vending machine panels, packaging, sporting goods, architectural, electronics, appliance nameplates, housing, toys, and novelty items. 收起 | Request Sample |
| EBECRYL® 8465 | Allnex | EBECRYL® 8465 is a clear liquid undiluted aliphatic urethane triacrylate oligomer. Films of EBECRYL 8465 cured by UV or EB exhibit excellent exterior durability, toughness and good flexibility, as well as the non-yellowing properties typical of an aliphat...展开 EBECRYL® 8465 is a clear liquid undiluted aliphatic urethane triacrylate oligomer. Films of EBECRYL 8465 cured by UV or EB exhibit excellent exterior durability, toughness and good flexibility, as well as the non-yellowing properties typical of an aliphatic urethane. It is recommended for use in coatings for wood and plastics requiring excellent exterior durability. 收起 | Request Sample |
| EBECRYL® 85 | Allnex | EBECRYL® 85 is a low viscosity amine modified polyether acrylate that provides high reactivity in low extractable, low odor energy curable coatings and inks. Coatings and inks based on EBECRYL® 85 exhibit a low odor after UV or EB curing. | Request Sample |
| EBECRYL® 853 | Allnex | Ebecryl® 853 is a trifunctional low viscous diluting acrylate giving low odour after UV or EB curing and low extractables It is compatible with a wide range of acrylated resins.\r\nEbecryl®853 was designed to produce low irritant formulations and contains...展开 Ebecryl® 853 is a trifunctional low viscous diluting acrylate giving low odour after UV or EB curing and low extractables It is compatible with a wide range of acrylated resins.\r\nEbecryl®853 was designed to produce low irritant formulations and contains less than 0.1 % TMPTA. 收起 | Request Sample |
| EBECRYL® 854 | Allnex | EBECRYL® 854 is an undiluted polyester acrylate resin. Films of EBECRYL® 854 cured by ultraviolet light (UV) or electron beam (EB) exhibits excellent adhesion, high toughness and good abrasion resistance. This product is recommended for parquet floor and ...展开 EBECRYL® 854 is an undiluted polyester acrylate resin. Films of EBECRYL® 854 cured by ultraviolet light (UV) or electron beam (EB) exhibits excellent adhesion, high toughness and good abrasion resistance. This product is recommended for parquet floor and furniture applications. 收起 | Request Sample |
| EBECRYL® 857 | Allnex | EBECRYL® 857 is a versatile medium viscosity, hybrid polyester acrylate developed for flooring and furniture applications. It can be applied by direct or reverse roller coater, and exhibits good performances for furniture and flooring applications. | Request Sample |
| EBECRYL® 8602 | Allnex | EBECRYL® 8602 is a nine functional aliphatic urethane acrylate. After polymerization, films of EBECRYL® 8602 exhibit significant improvement in weatherability compared to hexafunctional aliphatic urethane acrylate without compromising scratch and abrasion...展开 EBECRYL® 8602 is a nine functional aliphatic urethane acrylate. After polymerization, films of EBECRYL® 8602 exhibit significant improvement in weatherability compared to hexafunctional aliphatic urethane acrylate without compromising scratch and abrasion resistance. In addition, EBECRYL® 8602 does not contain intentionally added organic tin compounds, heavy metals* or quinones. 收起 | Request Sample |
| EBECRYL® 8606 | Allnex | EBECRYL® 8606 is an aliphatic urethane tetraacrylate. After ultraviolet light (UV) or electronic beam (EB) curing, it exhibits a unique combination of hardness, toughness, flexibility and abrasion resistance coupled with outstanding exterior durability p...展开 EBECRYL® 8606 is an aliphatic urethane tetraacrylate. After ultraviolet light (UV) or electronic beam (EB) curing, it exhibits a unique combination of hardness, toughness, flexibility and abrasion resistance coupled with outstanding exterior durability properties. It maintain excellent gloss retention after chemical tests. It is particularly suitable for paint protection & automotive interior films, and small draws thermoforming after cure. 收起 | Request Sample |
| EBECRYL® 870 | Allnex | EBECRYL® 870 is a fatty acid modified polyester hexaacrylate. Because of the special structure of the backbone and the high acrylic functionality, EBECRYL® 870 provides the proper hydrophilic-lipophilic balance necessary for lithography, and high reactivi...展开 EBECRYL® 870 is a fatty acid modified polyester hexaacrylate. Because of the special structure of the backbone and the high acrylic functionality, EBECRYL® 870 provides the proper hydrophilic-lipophilic balance necessary for lithography, and high reactivity when cured by ultraviolet light (UV) or an electron beam (EB). It is recommended for: fast curing lithographic inks and clear varnishes, and improving lithographic behavior as an additive. 收起 | Request Sample |
| EBECRYL® 8701 | Allnex | EBECRYL® 8701 is an aliphatic urethane triacrylate designed to bridge the gap between high surface hardness and excellent outdoor durability. EBECRYL 8701 can be used in applications requiring a combination of hardness, increased Tg, chemical resistance, ...展开 EBECRYL® 8701 is an aliphatic urethane triacrylate designed to bridge the gap between high surface hardness and excellent outdoor durability. EBECRYL 8701 can be used in applications requiring a combination of hardness, increased Tg, chemical resistance, and outdoor durability. Films of EBECRYL 8701 cured by ultraviolet light (UV) or electron beam (EB) exhibit a unique combination of surface hardness and outdoor durability typically not found in one molecule. EBECRYL® 8701 is recommended for use in: plastic coatings requiring good exterior durability, chemical resistance and scratch resistance, automotive OEM or re-finish, coatings for wood, metal coatings, post-formable coatings for metal tube and conduit, optical coatings, non-yellowing topcoats for wood, pigmented coatings for wood, screen inks, and exterior durable coatings. 收起 | Request Sample |
| EBECRYL® 8702 | Allnex | EBECRYL® 8702 is an aliphatic urethane hexaacrylate that offers a multitude of performance properties allowing the formulator the flexibilty to meet requirements. Films using EBECRYL® 8702 cured by ultraviolet light (UV) or electron beam (EB) exhibit a co...展开 EBECRYL® 8702 is an aliphatic urethane hexaacrylate that offers a multitude of performance properties allowing the formulator the flexibilty to meet requirements. Films using EBECRYL® 8702 cured by ultraviolet light (UV) or electron beam (EB) exhibit a combination of hardness, abrasion and impact resistance coupled with good exterior durability. It is recommended for use in: automotive OEM or refinish, coatings for wood, plastic coatings, screen inks, light stable coatings, and metal coatings. 收起 | Request Sample |
| EBECRYL® 8706 | Allnex | EBECRYL® 8706 is an aliphatic urethane diacrylate oligomer diluted with 20% TMPTA. Films of EBECRYL® 8706 exhibits good metallization acceptation, water resistance, flexibility and low yellowing. EBECRYL® 8706 is designed to be used as the main oligomer i...展开 EBECRYL® 8706 is an aliphatic urethane diacrylate oligomer diluted with 20% TMPTA. Films of EBECRYL® 8706 exhibits good metallization acceptation, water resistance, flexibility and low yellowing. EBECRYL® 8706 is designed to be used as the main oligomer in VM primer formulations requiring good leveling & plumpness, anti-haze and flexibility. 收起 | Request Sample |
| EBECRYL® 872 | Allnex | EBECRYL® 872 is polyester acrylate resin. Films of EBECRYL® 872 cured by ultraviolet light (UV) or electron beam (EB) exhibits excellent adhesion, high toughness and flexibility. EBECRYL® 872 is recommended for sealers for parquet floor and furniture appl...展开 EBECRYL® 872 is polyester acrylate resin. Films of EBECRYL® 872 cured by ultraviolet light (UV) or electron beam (EB) exhibits excellent adhesion, high toughness and flexibility. EBECRYL® 872 is recommended for sealers for parquet floor and furniture applications. 收起 | Request Sample |
| EBECRYL® 88 | Allnex | EBECRYL® 88 is an amine modified polyether acrylate that exhibits low viscosity and fast cure via exposure to ultraviolet light (UV). Films of EBECRYL® 88 cured by UV or electron beam (EB) demonstrate high gloss, solvent resistance and low residual odor. ...展开 EBECRYL® 88 is an amine modified polyether acrylate that exhibits low viscosity and fast cure via exposure to ultraviolet light (UV). Films of EBECRYL® 88 cured by UV or electron beam (EB) demonstrate high gloss, solvent resistance and low residual odor. EBECRYL® 88 is especially suited to applications requiring low viscosity and fast UV cure, including overprint varnishes and flexographic inks. 收起 | Request Sample |
| EBECRYL® 880 | Allnex | EBECRYL® 880 is a clear liquid low viscous amine modified multifunctional acrylated polyether oligomer generally used as main oligomer in low viscous clear formulations. It has been developed specially for applications where high gloss, fast cure response...展开 EBECRYL® 880 is a clear liquid low viscous amine modified multifunctional acrylated polyether oligomer generally used as main oligomer in low viscous clear formulations. It has been developed specially for applications where high gloss, fast cure response and a low viscosity (spray) by radiation are desired. It is recommended for use in: clear coatings on paper, wood, plastics, top coats for wood, high gloss coatings, and flexo inks and varnishes. 收起 | Request Sample |
| EBECRYL® 8804/10 EA | Allnex | EBECRYL 8804-10EA is the aliphatic urethane diacrylate EBECRYL 8804 blended with 10% by weight ethyl acetate for reduced viscosity. Films of EBECRYL 8804 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent abrasion resistance, toughne...展开 EBECRYL 8804-10EA is the aliphatic urethane diacrylate EBECRYL 8804 blended with 10% by weight ethyl acetate for reduced viscosity. Films of EBECRYL 8804 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent abrasion resistance, toughness and flexibility, and are resistant to yellowing. 收起 | Request Sample |
| EBECRYL® 8807 | Allnex | EBECRYL® 8807 is an aliphatic urethane diacrylate that exhibits rapid surface cure response, light color and moderate viscosity. Films cured by UV/EB light exhibit good flexibility, toughness, abrasion resistance, and are resistant to yellowing. It is rec...展开 EBECRYL® 8807 is an aliphatic urethane diacrylate that exhibits rapid surface cure response, light color and moderate viscosity. Films cured by UV/EB light exhibit good flexibility, toughness, abrasion resistance, and are resistant to yellowing. It is recommended for use in: coatings for wood, cement and composite flooring, adhesives or sealants cured with low intensity lamps, and flexible coatings requiring rapid cure in air. 收起 | Request Sample |
| EBECRYL® 8808 | Allnex | EBECRYL® 8808 is an undiluted aliphatic urethane diacrylate. Since the oligomer is undiluted, more formulating latitude is possible. Films of EBECRYL® 8808 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent exterior durability, toughn...展开 EBECRYL® 8808 is an undiluted aliphatic urethane diacrylate. Since the oligomer is undiluted, more formulating latitude is possible. Films of EBECRYL® 8808 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent exterior durability, toughness, and resistance to yellowing. It is recommended for use in: screen inks and coatings on various substrates, non-yellowing, exterior durable coatings, and coatings for wood and plastics. 收起 | Request Sample |
| EBECRYL® 8809 | Allnex | EBECRYL® 8809 is a difunctional aliphatic urethane acrylate that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). Films of EBECRYL® 8809 cured by ultraviolet light (UV...展开 EBECRYL® 8809 is a difunctional aliphatic urethane acrylate that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). Films of EBECRYL® 8809 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent exterior durability, toughness, and resistance to yellowing. 收起 | Request Sample |
| EBECRYL® 8810 | Allnex | EBECRYL® 8810 is a difunctional aliphatic urethane acrylate that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). (Please note that quinones are present in many raw ma...展开 EBECRYL® 8810 is a difunctional aliphatic urethane acrylate that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). (Please note that quinones are present in many raw materials, so the overall quinone content is reduced, but not zero in EBECRYL® 8810.) EBECRYL® 8810 is a high viscosity liquid at room temperature and is light in color. Films of EBECRYL® 8810 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent abrasion resistance, toughness and flexibility, and are resistant to yellowing. 收起 | Request Sample |
| EBECRYL® 8811 | Allnex | EBECRYL® 8811 is a difunctional aliphatic urethane acrylate that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). (Please note that quinones are present in many raw ma...展开 EBECRYL® 8811 is a difunctional aliphatic urethane acrylate that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). (Please note that quinones are present in many raw materials, so the overall quinone content is reduced, but not zero in EBECRYL® 8811.) EBECRYL® 8811 exhibits rapid surface cure response in both low and high energy cure systems. It is especially recommended for use in UV LED and UVA curing in order to obtain good surface cure. Films of EBECRYL® 8811 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, toughness, abrasion resistance, and are resistant to yellowing. 收起 | Request Sample |
| EBECRYL® 884 | Allnex | EBECRYL® 884 is an undiluted polyesteracrylate resin. Films of EBECRYL® 884 cured by ultraviolet light (UV) or electron beam (EB) exhibits high flexibility and excellent abrasion resistance. It is recommended for use in: parquet floor applications, furnit...展开 EBECRYL® 884 is an undiluted polyesteracrylate resin. Films of EBECRYL® 884 cured by ultraviolet light (UV) or electron beam (EB) exhibits high flexibility and excellent abrasion resistance. It is recommended for use in: parquet floor applications, furniture coatings, plastic coatings, and resilient flooring. 收起 | Request Sample |
| EBECRYL® 888 | Allnex | EBECRYL® 888 is a low viscosity polyester acrylate designed for use in UV/EB primer coatings to provide ink receptivity and prevent plasticizer migration. Films containing EBECRYL 888 which are cured by ultraviolet light (UV) or electron beam (EB) exhibit...展开 EBECRYL® 888 is a low viscosity polyester acrylate designed for use in UV/EB primer coatings to provide ink receptivity and prevent plasticizer migration. Films containing EBECRYL 888 which are cured by ultraviolet light (UV) or electron beam (EB) exhibit good adhesion, good abrasion and high flexibility. EBECRYL 888 is recommended for use in flexographic or gravure primer coatings printed on polyester, plasticized PVC and uncoated films. 收起 | Request Sample |
| EBECRYL® 8894 | Allnex | EBECRYL® 8894 is an aliphatic urethane acrylate, diluted in butyl acetate, designed for applications requiring high humidity and abrasion resistance. Films of EBECRYL®8894 cured via exposure to ultraviolet light (UV) or electron beam (EB) exhibit excellen...展开 EBECRYL® 8894 is an aliphatic urethane acrylate, diluted in butyl acetate, designed for applications requiring high humidity and abrasion resistance. Films of EBECRYL®8894 cured via exposure to ultraviolet light (UV) or electron beam (EB) exhibit excellent exterior durability, good toughness and flexibility, as well as the non-yellowing properties typical of an aliphatic urethane. 收起 | Request Sample |
| EBECRYL® 8896 | Allnex | EBECRYL® 8896 is a revolutionary aliphatic urethane acrylate designed for application(s) requiring haptic properties (e.g. “soft touch/feel”). Films of EBECRYL®8896 cured via exposure to ultraviolet light (UV) or electron beam (EB) are tough, flexible, an...展开 EBECRYL® 8896 is a revolutionary aliphatic urethane acrylate designed for application(s) requiring haptic properties (e.g. “soft touch/feel”). Films of EBECRYL®8896 cured via exposure to ultraviolet light (UV) or electron beam (EB) are tough, flexible, and resistant to yellowing. EBECRYL®8896 is compatible with variety of fillers, pigments, waxes, and polymeric beads allowing formulator maximum formulating latitude to create a number of haptic properties ranging from a velvety/silky feel to EBECRYL®8896’s intrinsic rubbery feel. 收起 | Request Sample |
| EBECRYL® 892 | Allnex | EBECRYL® 892 is a light colour, low viscosity tetra-functional acrylated oligomer. It also improves the hardness and solvent resistance of cured inks and coatings. EBECRYL® 892 is particularly useful for lithographic offset inks, flexo inks and overprint ...展开 EBECRYL® 892 is a light colour, low viscosity tetra-functional acrylated oligomer. It also improves the hardness and solvent resistance of cured inks and coatings. EBECRYL® 892 is particularly useful for lithographic offset inks, flexo inks and overprint varnishes. 收起 | Request Sample |
| EBECRYL® 893 | Allnex | EBECRYL® 893是一款专门为UV固化领域开发的改性聚酯丙烯酸酯，可应用于混凝土及乙烯基树脂复合瓷砖（VCT）地坪涂料。EBECRYL® 893的低粘度也为实现施工所需低粘度配方提供了余地。它推荐用于UV固化领域，用于混凝土和VCT涂料。 | Request Sample |
| EBECRYL® 895 | Allnex | Ebecryl® 895 is a multifunctional monomer which polymerizes when exposed to sources of free radicals. It is composed primarily of the pentaacrylate and hexaacrylate esters of dipentaerythritol. Ebecryl® 895 is particularly useful in UV (ultraviolet) and E...展开 Ebecryl® 895 is a multifunctional monomer which polymerizes when exposed to sources of free radicals. It is composed primarily of the pentaacrylate and hexaacrylate esters of dipentaerythritol. Ebecryl® 895 is particularly useful in UV (ultraviolet) and EB (electron beam) curable inks and coatings where improved cure response, hardness and scratch/abrasion resistance are required. 收起 | Request Sample |
| EBECRYL® 896 | Allnex | EBECRYL® 896 is a multifunctional monomer which polymerizes when exposed to sources of free radicals. It is a low viscosity DPHA composed primarily of pentaacrylate and hexaacrylate esters of dipentaerythritol. It is particularly useful in UV/EB inks and ...展开 EBECRYL® 896 is a multifunctional monomer which polymerizes when exposed to sources of free radicals. It is a low viscosity DPHA composed primarily of pentaacrylate and hexaacrylate esters of dipentaerythritol. It is particularly useful in UV/EB inks and coatings where improved cure response, hardness and scratch/abrasion resistance are required. 收起 | Request Sample |
| EBECRYL® 898 | Allnex | EBECRYL® 898 is a special purpose, 100% solids tetra functional polyester acrylate that extends the matting effect of a silica containing formulation. It is characterized by extended matting effect, low viscosity, low odour, and fast cure. This product is...展开 EBECRYL® 898 is a special purpose, 100% solids tetra functional polyester acrylate that extends the matting effect of a silica containing formulation. It is characterized by extended matting effect, low viscosity, low odour, and fast cure. This product is recommended for wood and plastic coatings, paper upgrading, flexographic inks, and EB cured paper-foil coatings. 收起 | Request Sample |
| EBECRYL® IBOA | Allnex | EBECRYL® IBOA, Isobornyl acrylate, is a high purity, low colour monofunctional diluent monomer which polymerizes when exposed to sources of free radicals. It is a diluent compatible with a wide range of acrylated oligomers used in UV/EB curing application...展开 EBECRYL® IBOA, Isobornyl acrylate, is a high purity, low colour monofunctional diluent monomer which polymerizes when exposed to sources of free radicals. It is a diluent compatible with a wide range of acrylated oligomers used in UV/EB curing applications. Good viscosity reduction and low shrinkage properties make this product useful in a variety of overprint varnishes, inks, and coatings. 收起 | Request Sample |
| EBECRYL® IBOMA | Allnex | EBECRYL® IBOMA (isobornyl methacrylate) is a mono-functional monomer which polymerizes when exposed to sources of free radicals. EBECRYL® IBOMA forms homopolymers and copolymers. EBECRYL® IBOMA is compatible with a wide range of acrylated- and methacrylat...展开 EBECRYL® IBOMA (isobornyl methacrylate) is a mono-functional monomer which polymerizes when exposed to sources of free radicals. EBECRYL® IBOMA forms homopolymers and copolymers. EBECRYL® IBOMA is compatible with a wide range of acrylated- and methacrylated resins. 收起 | Request Sample |
| EBECRYL® LED 02 | Allnex | EBECRYL® LED 02, a mercapto modified polyester acrylate resin, can be added as a co-resin to UV curable formulations. EBECRYL® LED 02 transforms formulations into UV LED, UVA, or low energy curable systems by providing better surface cure. In addition, th...展开 EBECRYL® LED 02, a mercapto modified polyester acrylate resin, can be added as a co-resin to UV curable formulations. EBECRYL® LED 02 transforms formulations into UV LED, UVA, or low energy curable systems by providing better surface cure. In addition, this co-resin can also be used to obtain better surface cure in high energy cure formulations. EBECRYL® LED 02 provides better surface cure by mitigating oxygen inhibition of the free radical process. 收起 | Request Sample |
| EBECRYL® LED 03 | Allnex | EBECRYL® LED 03 is a low viscosity amine modified polyether acrylate oligomer that can be added as a co‐resin to UV curable formulations. EBECRYL® LED 03 – when combined with an appropriate photoinitiator system – transforms formulations into UV LED, UVA,...展开 EBECRYL® LED 03 is a low viscosity amine modified polyether acrylate oligomer that can be added as a co‐resin to UV curable formulations. EBECRYL® LED 03 – when combined with an appropriate photoinitiator system – transforms formulations into UV LED, UVA, or low energy curable systems by providing improved surface cure. In addition, this effect is also seen in high energy cure formulations. The improved surface cure is obtained by mitigating oxygen inhibition of the free radical process and/or by being an amine synergist for Norrish type II photoinitiators. 收起 | Request Sample |
| EBECRYL® LED 04 | Allnex | EBECRYL® LED 04 is an acrylated polyamine that can be added as a co-resin to UV curable formulations. EBECRYL® LED 04 – when combined with an appropriate photo initiator system – transforms formulations into UV LED, UVA, or low energy curable systems by p...展开 EBECRYL® LED 04 is an acrylated polyamine that can be added as a co-resin to UV curable formulations. EBECRYL® LED 04 – when combined with an appropriate photo initiator system – transforms formulations into UV LED, UVA, or low energy curable systems by providing improved surface cure. In addition, this effect is also seen in high energy cure formulations. The improved surface cure is obtained by mitigating oxygen inhibition of the free radical process and/or by being an amine synergist for Norrish type II photo initiators. Coating and inks based on EBECRYL® LED 04 exhibit a low odor after UV or EB curing. Due to its hydrophobic nature EBECRYL® LED 04 can also be used in offset inks applications as a replacement of aminobenzoate synergists. 收起 | Request Sample |
| EBECRYL® LED 05 | Allnex | EBECRYL® LED 05 is an acrylated polyamine that can be added as a co-resin to UV curable formulations. EBECRYL® LED 05 – when combined with an appropriate photo initiator system – transforms formulations into UV LED, UVA, or low energy curable systems by...展开 EBECRYL® LED 05 is an acrylated polyamine that can be added as a co-resin to UV curable formulations. EBECRYL® LED 05 – when combined with an appropriate photo initiator system – transforms formulations into UV LED, UVA, or low energy curable systems by providing improved surface cure. In addition, this effect is also seen in high energy cure formulations. The improved surface cure is obtained by mitigating oxygen inhibition of the free radical process and/or by being an amine synergist for Norrish type II photo initiators. Coating and inks based on EBECRYL® LED 05 exhibit a low odor after UV or EB curing. Due to its unique structure EBECRYL® LED 05 based flexo inks have improved ink flow stability due to better compatibility with organic pigments. 收起 | Request Sample |
| EBECRYL® LEO 10101 | Allnex | EBECRYL® LEO 10101 is a self-curing multifunctional acrylate enabling the UV curing of printing inks and coatings, not requiring additional photoinitiator, which reduces the risk of migration in indirect food contact applications. It is specifically devel...展开 EBECRYL® LEO 10101 is a self-curing multifunctional acrylate enabling the UV curing of printing inks and coatings, not requiring additional photoinitiator, which reduces the risk of migration in indirect food contact applications. It is specifically developed for making high reactive nicely flowing low migration Flexo inks. This product can be used for different colours, also for white. It is recommended to use 20-30% EBECRYL® LEO 10101 in an ink or coating to reach a correct surface and through cure. 收起 | Request Sample |
| EBECRYL® LEO 10103 | Allnex | EBECRYL® LEO 10103 is a multifunctional acrylate that in the presence of an amine synergist can enable the UV curing of printing inks and coatings without, or with only a minimal amount, of photoinitiator. The elimination or reduction of photoinitiator de...展开 EBECRYL® LEO 10103 is a multifunctional acrylate that in the presence of an amine synergist can enable the UV curing of printing inks and coatings without, or with only a minimal amount, of photoinitiator. The elimination or reduction of photoinitiator decreases the potential for migration in indirect food contact applications. EBECRYL® LEO 10103 can be used for low migration over print varnishes along with flexographic and offset inks in the entire colour range, including white. EBECRYL® LEO 10103 at 10-20% by weight in a coating or ink can provide a good balance of surface and through cure. 收起 | Request Sample |
| EBECRYL® LEO 10501 | Allnex | EBECRYL® LEO 10501 is a trifunctional diluting oligomer that provides low extractables, low odor and low migration after UV or EB curing. It is compatible with a wide range of acrylated resins. It can be used to produce low odor and low migrating UV overp...展开 EBECRYL® LEO 10501 is a trifunctional diluting oligomer that provides low extractables, low odor and low migration after UV or EB curing. It is compatible with a wide range of acrylated resins. It can be used to produce low odor and low migrating UV overprint varnishes (OPV’s) and inks for indirect food contact applications. EBECRYL® LEO 10501 is specially recommended to formulate low extractable and low odor UV/EB curable OPV’s and inks for flexography, lithography and screen applications. 收起 | Request Sample |
| EBECRYL® LEO 10502 | Allnex | EBECRYL® LEO 10502 is a low viscosity polymeric tetrafunctional polyether acrylate that provides low extractables, low odor and low migration after UV or EB curing. It is recommended for use in low odor and low migrating UV/EB curable overprint varnishes ...展开 EBECRYL® LEO 10502 is a low viscosity polymeric tetrafunctional polyether acrylate that provides low extractables, low odor and low migration after UV or EB curing. It is recommended for use in low odor and low migrating UV/EB curable overprint varnishes (OPV’s) and inks. 收起 | Request Sample |
| EBECRYL® LEO 10551 | Allnex | EBECRYL® LEO 10551 is a low viscosity amine modified polyether acrylate oligomer that provides low extractables, low odor and low migration after UV or EB curing. It is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) and i...展开 EBECRYL® LEO 10551 is a low viscosity amine modified polyether acrylate oligomer that provides low extractables, low odor and low migration after UV or EB curing. It is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) and inks for indirect food packaging applications. 收起 | Request Sample |
| EBECRYL® LEO 10552 | Allnex | EBECRYL® LEO 10552 is a low viscosity amine modified polyether acrylate oligomer that provides low extractables, low odor and low migration after UV or EB curing. It is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) and i...展开 EBECRYL® LEO 10552 is a low viscosity amine modified polyether acrylate oligomer that provides low extractables, low odor and low migration after UV or EB curing. It is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) and inks for indirect food packaging applications. 收起 | Request Sample |
| EBECRYL® LEO 10553 | Allnex | EBECRYL® LEO 10553 is a low viscosity polymeric amine modified polyether acrylate that provides low extractables, low odor and low migration and after UV or EB curing. It is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) ...展开 EBECRYL® LEO 10553 is a low viscosity polymeric amine modified polyether acrylate that provides low extractables, low odor and low migration and after UV or EB curing. It is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) and inks for indirect food packaging applications. 收起 | Request Sample |
| EBECRYL® LEO 10601 | Allnex | EBECRYL® LEO 10601 is a modified epoxy acrylate that provides low extractables and low odor after UV or EB curing. It exhibits good pigment wetting properties and produces UV offset inks exhibiting enhanced ink- water balance and low misting. It may also ...展开 EBECRYL® LEO 10601 is a modified epoxy acrylate that provides low extractables and low odor after UV or EB curing. It exhibits good pigment wetting properties and produces UV offset inks exhibiting enhanced ink- water balance and low misting. It may also be used to produce UV flexo inks with good flow, high gloss and high reactivity. It is also suitable for screen and gravure application and OPV. 收起 | Request Sample |
| EBECRYL® LEO 10801 | Allnex | EBECRYL® LEO 10801 is a hexafunctional polyester acrylate oligomer that provides high reactivity and the proper ink-water balance necessary for good lithographic printing. Lithographic inks based on EBECRYL® LEO 10801 display excellent rheological propert...展开 EBECRYL® LEO 10801 is a hexafunctional polyester acrylate oligomer that provides high reactivity and the proper ink-water balance necessary for good lithographic printing. Lithographic inks based on EBECRYL® LEO 10801 display excellent rheological properties ensuring good ink transfer from the printing plate to the blanket and then to the substrate, combined with good dot definition. It is recommended for use in: lithographic and flexographic inks, offset OPV, and inks and coatings for indirect food packaging and related applications. 收起 | Request Sample |
| EBECRYL® MPDDA | Allnex | EBECRYL® MPDDA is a difunctional monomer which polymerizes when exposed to sources of free radicals. This difunctional acrylated monomer is particularly useful in inks and coatings where improved elasticity, weathering and adhesion are desired in combinat...展开 EBECRYL® MPDDA is a difunctional monomer which polymerizes when exposed to sources of free radicals. This difunctional acrylated monomer is particularly useful in inks and coatings where improved elasticity, weathering and adhesion are desired in combination with an excellent water resistance. 收起 | Request Sample |
| EBECRYL® P115 | Allnex | EBECRYL® P115 is a copolymerizable amine used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. ADDITOL® BP), EBECRYL® P115 provides rapid UV ...展开 EBECRYL® P115 is a copolymerizable amine used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. ADDITOL® BP), EBECRYL® P115 provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. It has recommended levels are from 5 to 15% based on the total formulation, usually combined with 3-5% photosensitizer. EBECRYL® P115 is recommended as a reactive co-initiator in the following applications: overprint varnishes, screen and flexo inks, wood topcoats, clear coatings on paper and plastics, and pigmented coatings. 收起 | Request Sample |
| EBECRYL® P116 | Allnex | EBECRYL® P 116 is a reactive amine additive used in place of more volatile amine synergists to increase the cure speed of ultraviolet (UV) cured coatings. When EBECRYL® P 116 is used in combination with other photoinitiators an increase in cure speed, esp...展开 EBECRYL® P 116 is a reactive amine additive used in place of more volatile amine synergists to increase the cure speed of ultraviolet (UV) cured coatings. When EBECRYL® P 116 is used in combination with other photoinitiators an increase in cure speed, especially at the surface, can be realized. It is recommended for use in: overprint varnishes, wood fillers and top coats, and clear coatings on paper and plastics. 收起 | Request Sample |
| EBECRYL® P39 | Allnex | EBECRYL® P39 is a polymeric benzophenone derivative diluted with 25% of EBECRYL® LEO 10501 that functions as the photosensitizer in hydrogen abstraction type radical photoinitiator systems. EBECRYL® P39 has been designed for use in the formulation of UV c...展开 EBECRYL® P39 is a polymeric benzophenone derivative diluted with 25% of EBECRYL® LEO 10501 that functions as the photosensitizer in hydrogen abstraction type radical photoinitiator systems. EBECRYL® P39 has been designed for use in the formulation of UV coatings that exhibit little or no odor after curing. It has recommended levels are from 8 to 10% based on total formulation. It should be used in combination with amine co-initiators such as EBECRYL® P115 or EBECRYL® 7100. EBECRYL® P39 is recommended for use in over print varnishes where low residual odor is required. 收起 | Request Sample |
| EBECRYL® TMPTMA | Allnex | EBECRYL® TMPTMA, CAS No. 3290-92-4, is a trifunctional monomer which polymerizes when exposed to sources of free radicals. EBECRYL® TMPTMA forms homopolymers and copolymers. EBECRYL® TMPTMA is compatible with a wide range of acrylated- and methacrylated r...展开 EBECRYL® TMPTMA, CAS No. 3290-92-4, is a trifunctional monomer which polymerizes when exposed to sources of free radicals. EBECRYL® TMPTMA forms homopolymers and copolymers. EBECRYL® TMPTMA is compatible with a wide range of acrylated- and methacrylated resins. 收起 | Request Sample |
| EMTEC 5005 | Allnex | Emtec 5005 is a colloid stabilised styrene acrylic emulsion of fine to medium particle size. It exhibits exceptional water resistance and superior adhesion to a wide variety of surfaces. | Request Sample |
| EMTEC 5021 | Allnex | EMTEC™ 5021 is an APE free styrene acrylic emulsion of fine particle size which film forms below its theoretical Tg. It exhibits a faster build-up of water resistance than the acrylics and even more outstanding water resistance and adhesion of the dried f...展开 EMTEC™ 5021 is an APE free styrene acrylic emulsion of fine particle size which film forms below its theoretical Tg. It exhibits a faster build-up of water resistance than the acrylics and even more outstanding water resistance and adhesion of the dried film. 收起 | Request Sample |
| G-CURE™ 17-0105 | Allnex | G-Cure® 17-0105 (formerly G-Cure® 105P70) acrylic resin is designed for high build, higher volume solids acrylic urethane topcoats and primers. It will react at room temperature with aliphatic polyisocyanates to give excellent application properties. Form...展开 G-Cure® 17-0105 (formerly G-Cure® 105P70) acrylic resin is designed for high build, higher volume solids acrylic urethane topcoats and primers. It will react at room temperature with aliphatic polyisocyanates to give excellent application properties. Formulations can be designed for high gloss, lower solvent industrial maintenance coatings. 收起 | Request Sample |
| G-Cure® 17-0807 | Allnex | G-CURE 17-0807 (formerly G-CURE 806PT60) acrylic resin is a hydroxyl functional acrylic copolymer designed to react at room temperature with aliphatic polyisocyanates to produce high performance coatings. Coatings formulated with G-CURE 17-0807 exhibit ou...展开 G-CURE 17-0807 (formerly G-CURE 806PT60) acrylic resin is a hydroxyl functional acrylic copolymer designed to react at room temperature with aliphatic polyisocyanates to produce high performance coatings. Coatings formulated with G-CURE 17-0807 exhibit outstanding durability, chemical resistance and color retention. Coatings produced with G-CURE 17-0807 are suitable for metal, wood and plastic, particularly when heat sensitivity is a concern. 收起 | Request Sample |
| G-CURE™ 17-0870 | Allnex | G-Cure® 17-0870 (formerly G-Cure® 870BLX50) acrylic resin is a hydroxyl functional acrylic resin designed to react at room temperature with aliphatic polyisocyanates to produce high performance coatings. Coatings formulated with G-Cure® 17-0870 have fast ...展开 G-Cure® 17-0870 (formerly G-Cure® 870BLX50) acrylic resin is a hydroxyl functional acrylic resin designed to react at room temperature with aliphatic polyisocyanates to produce high performance coatings. Coatings formulated with G-Cure® 17-0870 have fast lacquer-like dry, but provide long pot life due to controlled reactivity. The cured films exhibit excellent durability and good chemical resistance. 收起 | Request Sample |
| HDDA | Allnex | HDDA (Hexanediol diacrylate) is a difunctional reactive diluent that is commonly used as a component of ultraviolet light (UV) and electron beam (EB) curable coatings and inks. HDDA is particularly useful in coatings and inks where improved elasticity, w...展开 HDDA (Hexanediol diacrylate) is a difunctional reactive diluent that is commonly used as a component of ultraviolet light (UV) and electron beam (EB) curable coatings and inks. HDDA is particularly useful in coatings and inks where improved elasticity, weathering and adhesion are desired in combination with excellent water resistance. 收起 | Request Sample |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HETRON® 980/35-45 | Allnex | HETRON® 980/35-45 is a prepromoted, thixotropic, wax free, Novolac epoxy based vinyl ester resin containing less than 35% styrene. | Request Sample |
| Iron Oxide Black | Tongling Rely Technology Co., Ltd. | Iron Oxide Black is an iron oxide pigment that contains saturated blue light black ink with high hiding power, tinting strength, alkali resistance and lightfastness. This product is often used in paint applications. | |
| Iron Oxide Blue | Tongling Rely Technology Co., Ltd. | Iron Oxide Blue is a dark and light blue pigment powder that has an oil absorption of 15-30% and a moisture content of 1%. This product is used for strong and bright coloring in paint and ink applications. | |
| Iron Oxide Brown | Tongling Rely Technology Co., Ltd. | Iron Oxide Brown is an iron oxide pigment with strong adaptability to other iron oxide pigments. This product is used for coloring in paint applications. | |
| Iron Oxide Green | Tongling Rely Technology Co., Ltd. | Iron Oxide Green is a green iron oxide organic pigment made by coupling a variety of additives composite pigments. This product provides strong and bright coloring to colored paint applications. | |
| Iron Oxide Red | Tongling Rely Technology Co., Ltd. | Iron Oxide Red is a red iron oxide and inorganic color pigment that contains high hiding power, strong tinting strength, good dispersibility, light resistance and weather resistance. This product is commonly used in paint applications. | |
| Iron Oxide Yellow | Tongling Rely Technology Co., Ltd. | Iron Oxide Yellow is an iron oxide pigment of relatively stable chemical properties of alkaline oxides. This product provides a pure and bright yellow color of iron with good weather resistance and hiding power. It is commonly used in ink applications. | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...展开 KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. 收起 | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...展开 KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. 收起 | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...展开 KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. 收起 | |
| MACRYNAL® SM 2516/70BAC | Allnex | MACRYNAL® SM 2516/70BAC is a hydroxy functional acrylic resin crosslinkable with polyisocyanates. It is recommended for air-drying and forced drying two-pack medium high solids systems with high gloss. It offers excellent mechanical properties, excellent ...展开 MACRYNAL® SM 2516/70BAC is a hydroxy functional acrylic resin crosslinkable with polyisocyanates. It is recommended for air-drying and forced drying two-pack medium high solids systems with high gloss. It offers excellent mechanical properties, excellent chemical resistance and good outdoor stability for automotive refinishes. 收起 | Request Sample |
| MACRYNAL® SM 2703/80BACX | Allnex | MACRYNAL® SM 2703/80BACX is a hydroxy functional acrylic resin designed for crosslinking with polyisocyanates for air-drying as well as forced drying high-solids two pack topcoats for industrial applications. | Request Sample |
| MACRYNAL® SM 2704/75BACX | Allnex | 羟基官能团丙烯酸树脂，设计用于与聚异氰酸酯交联。快干体系，具有高硬度 | Request Sample |
| MACRYNAL® SM 2711/70BAC | Allnex | Macrynal® SM 2711/70BAC is a hydroxy functional acrylic resin designed for crosslinking with polyisocyanates. It is used for air-drying as well as forced drying high-solids two pack primers and topcoats for industrial applications. | Request Sample |
| MACRYNAL® SM 2727/70X | Allnex | MACRYNAL® SM 2727/70X is a hydroxy functional acrylic resin designed for crosslinking with polyisocyanates. It is used for air‐drying as well as forced drying high‐solids, two pack primers and topcoats for industrial applications. This product leads to fa...展开 MACRYNAL® SM 2727/70X is a hydroxy functional acrylic resin designed for crosslinking with polyisocyanates. It is used for air‐drying as well as forced drying high‐solids, two pack primers and topcoats for industrial applications. This product leads to fast drying systems with high hardness. The principal application area is industrial coatings, in particular primers and topcoats. Such paints display a low content of volatile organic compounds (VOC). 收起 | Request Sample |
| MACRYNAL® SM 2810/75BAC | Allnex | 羟基官能团丙烯酸树脂，设计用于与聚异氰酸酯交联。具有杰出的综合性能，比如耐化学品性能，机械性能和户外稳定性 | Request Sample |
| MACRYNAL® SM 2815/70BAC | Allnex | MACRYNAL® SM 2815/70BAC is a hydroxyfunctional, acrylic modified polyester. It is cross-linkable with polyisocyanates for the production of high solids lacquers. Coatings based on MACRYNAL® SM 2815/70BAC show properties such as a very good balance of hard...展开 MACRYNAL® SM 2815/70BAC is a hydroxyfunctional, acrylic modified polyester. It is cross-linkable with polyisocyanates for the production of high solids lacquers. Coatings based on MACRYNAL® SM 2815/70BAC show properties such as a very good balance of hardness and flexibility, resistance toward solvents, and very good weathering stability. 收起 | Request Sample |
| MACRYNAL® SM 2855/70BAC | Allnex | Macrynal® SM 2855/70BAC is a hydroxy functional acrylic resin designed for crosslinking with polyisocyanates. It is a high solid binder for the formulation of fast drying, highly crosslinked two-pack polyurethane coatings providing outstanding properties ...展开 Macrynal® SM 2855/70BAC is a hydroxy functional acrylic resin designed for crosslinking with polyisocyanates. It is a high solid binder for the formulation of fast drying, highly crosslinked two-pack polyurethane coatings providing outstanding properties in terms of chemical and solvent resistance. 收起 | Request Sample |
| MACRYNAL® SM 2892/65XBAC | Allnex | Macrynal® SM 2892/65XBAC is a hydroxy-functional acrylic polymer and is cross-linkable with polyisocyanates. In combination with aliphatic polyisocyanates, it produces high quality, flexible two-pack clearcoats and pigmented topcoats. The cured films prov...展开 Macrynal® SM 2892/65XBAC is a hydroxy-functional acrylic polymer and is cross-linkable with polyisocyanates. In combination with aliphatic polyisocyanates, it produces high quality, flexible two-pack clearcoats and pigmented topcoats. The cured films provide a good balance of flexibility and hardness, additionally, such films show superior weathering stability. 收起 | Request Sample |
| MACRYNAL® SM 500/60X | Allnex | MACRYNAL® SM 500/60X is a hydroxy functional acrylic resin, cross-linkable with polyisocyanates with high gloss, good mechanical properties and good adhesion to metals and plastic substrates. | Request Sample |
| MACRYNAL® SM 510/60LG | Allnex | 羟基官能团丙烯酸树脂，可与聚异氰酸酯交联，具有高光泽，非常好的机械性能，出色的户外稳定性和耐化学品性能 | Request Sample |
| MACRYNAL® SM 510n/60LG | Allnex | 羟基官能团丙烯酸树脂，设计用于与聚异氰酸酯交联 | Request Sample |
| MACRYNAL® SM 510n/60LGV5 | Allnex | MACRYNAL® SM 510n/60LGV5 is a hydroxy functional acrylic resin designed for crosslinking with polyisocyanates. It is intended primarily for use in automotive refinish coatings. This product offers quick hardness, excellent outdoor durability, and very goo...展开 MACRYNAL® SM 510n/60LGV5 is a hydroxy functional acrylic resin designed for crosslinking with polyisocyanates. It is intended primarily for use in automotive refinish coatings. This product offers quick hardness, excellent outdoor durability, and very good mechanical properties and chemical resistance. 收起 | Request Sample |
| MACRYNAL® SM 510n/65BACX | Allnex | 羟基官能团丙烯酸树脂，设计用于与聚异氰酸酯交联。具有高光泽，出色的机械性能和良好的户外耐久性和耐化学品性能 | Request Sample |
| MACRYNAL® SM 512/65BACX | Allnex | Macrynal® SM 512/65BACX is a hydroxy functional acrylic resin, designed for crosslinking with polyisocyanates for varnishes for industrial use. The good compatibility with Tolonate HDB and Desmodur N allows the production of fast drying primers and top co...展开 Macrynal® SM 512/65BACX is a hydroxy functional acrylic resin, designed for crosslinking with polyisocyanates for varnishes for industrial use. The good compatibility with Tolonate HDB and Desmodur N allows the production of fast drying primers and top coats for spray applications. 收起 | Request Sample |
| MACRYNAL® SM 513/60LG | Allnex | 羟基官能团丙烯酸树脂，设计用于与聚异氰酸酯交联 | Request Sample |
| MACRYNAL® SM 515/70BAC | Allnex | 羟基官能团丙烯酸树脂，可与聚异氰酸酯交联，结合脂肪族聚异氰酸酯时，建议用于自干和烘干型双组份高固含体系汽车OEM和表面修整涂料 | Request Sample |
| MACRYNAL® SM 516/70BAC | Allnex | 丙烯酸树脂，含有羟基基团，用于交联聚异氰酸酯或三聚氰胺 | Request Sample |
