| Depol NW-130 | Naewoi Korea Resins | Depol NW-130 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ether with a modified acrylic copolymer. This product deaerates during high temperature baking and does not cause a gloss reduction. Depol NW-130 is used ...展开 Depol NW-130 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ether with a modified acrylic copolymer. This product deaerates during high temperature baking and does not cause a gloss reduction. Depol NW-130 is used in alkyd and polyester baking systems, 1,2-component acrylic and acrylic baking systems, chlorinated rubber and epoxy coatings, and linear polyester coatings. 收起 | |
| Depol NW-133 | Naewoi Korea Resins | Depol NW-133 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ether with a modified acrylic copolymer. This product helps deaerate during high temperature baking and has no influence on inter-adhesive properties as a...展开 Depol NW-133 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ether with a modified acrylic copolymer. This product helps deaerate during high temperature baking and has no influence on inter-adhesive properties as a polymer type. Depol NW-133 is used in alkyd, acrylic and polyester melamine high temperature baking systems, acrylic urethane coatings, solvent and solvent free based epoxy coatings, and acid catalyst and coil coating systems. 收起 | |
| Depol NW-133W | Naewoi Korea Resins | Depol NW-133W is a mineral type defoamer for water based systems. This product is a defoaming additive that prevents bubble and foam during the manufacturing of coatings. Depol NW-133W is used in highly filled emulsion paints, water based acrylic emulsion...展开 Depol NW-133W is a mineral type defoamer for water based systems. This product is a defoaming additive that prevents bubble and foam during the manufacturing of coatings. Depol NW-133W is used in highly filled emulsion paints, water based acrylic emulsion systems, and exterior wall paints. 收起 | |
| Depol NW-137 | Naewoi Korea Resins | Depol NW-137 is a polymer type defoamer for solvent based systems. Its main component is a vinyl ether with a modified acrylic copolymer. This product improves levelling and anti-flooding and also has no influence on inter-adhesive properties in polymers....展开 Depol NW-137 is a polymer type defoamer for solvent based systems. Its main component is a vinyl ether with a modified acrylic copolymer. This product improves levelling and anti-flooding and also has no influence on inter-adhesive properties in polymers. Depol NW-137 is used in alkyd, acrylic and polyester high temperature baking systems, acrylic lacquer and acrylic urethane coatings, chlorinated rubber and epoxy coatings, and acid catalyst and coil coating systems. 收起 | |
| Depol NW-138 | Naewoi Korea Resins | Depol NW-138 is a polymer type defoamer for solvent based systems. Its main component is a modified olefin polymer. This product does not cause a gloss reduction or cratering problem during defoaming or dearating. Depol NW-138 is used in coil coatings, al...展开 Depol NW-138 is a polymer type defoamer for solvent based systems. Its main component is a modified olefin polymer. This product does not cause a gloss reduction or cratering problem during defoaming or dearating. Depol NW-138 is used in coil coatings, alkyd baking systems, polyester melamine high temperature baking systems, and acrylic baking systems. 收起 | |
| Depol NW-140S | Naewoi Korea Resins | Depol NW-140S is a defoaming and de-aerating additive for organic solvent systems. Its main component is a special polymer with polysiloxane copolymer. It provides superior defoaming and deaerating properties is also a solvent free type and improves gloss...展开 Depol NW-140S is a defoaming and de-aerating additive for organic solvent systems. Its main component is a special polymer with polysiloxane copolymer. It provides superior defoaming and deaerating properties is also a solvent free type and improves gloss, slip and levelling. Depol NW-140S is used in 2-component solvent and solvent free based epoxy coatings, 2-component solvent and solvent free based urethane coatings, and general industrial high temperature baking systems. 收起 | |
| Depol NW-147W | Naewoi Korea Resins | Depol NW-147W is a mineral type defoamer for water based systems. Its main component is a paraffinic mineral oil in combination with emulsifiers and silicone. This product is a defoaming additive that prevents bubble and foam during the manufacturing of ...展开 Depol NW-147W is a mineral type defoamer for water based systems. Its main component is a paraffinic mineral oil in combination with emulsifiers and silicone. This product is a defoaming additive that prevents bubble and foam during the manufacturing of coatings. Depol NW-147W is used in styrene modified acrylic emulsion systems, acrylic emulsions, water dispersing polyurethane systems, and the production of emulsion binders. 收起 | |
| Depol NW-151 | Naewoi Korea Resins | Depol NW-151 is a defoaming and de-aerating additive for organic solvent systems. Its main component is a special polymer with polysiloxane copolymer. It displays defoaming and deaerating properties. Depol NW-151 is used in wood coatings based on short oi...展开 Depol NW-151 is a defoaming and de-aerating additive for organic solvent systems. Its main component is a special polymer with polysiloxane copolymer. It displays defoaming and deaerating properties. Depol NW-151 is used in wood coatings based on short oil alkyd wood coatings based on polyurethane, fast drying enamel coatings based on acrylic lacquer, vinyl resin, polyester-melamine high temperature baking systems, and flooring and can coatings based on epoxy. 收起 | |
| Depol NW-156 | Naewoi Korea Resins | Depol NW-156 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ester copolymer. This product performs well in regards to deaerating during the spraying, rolling, and brushing of coatings. Depol NW-156 is used in alkyd...展开 Depol NW-156 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ester copolymer. This product performs well in regards to deaerating during the spraying, rolling, and brushing of coatings. Depol NW-156 is used in alkyd and lacquer fast air drying enamel systems, 2-component urethane and epoxy coatings, and PVC plastisol coatings. 收起 | |
| Depol NW-161 | Naewoi Korea Resins | Depol NW-161 is a defoaming and de-aerating additive for organic solvent systems. Its main component is a special polymer with polysiloxane copolymer. It displays superior compatibility and defoaming for organic solvent systems. Depol NW-161 is used in vi...展开 Depol NW-161 is a defoaming and de-aerating additive for organic solvent systems. Its main component is a special polymer with polysiloxane copolymer. It displays superior compatibility and defoaming for organic solvent systems. Depol NW-161 is used in vinyl, polyurethane, and epoxy ester coatings, NC lacquer, flooring and wood coatings, and polyester, general industrial systems. 收起 | |
| Depol NW-1640 | Naewoi Korea Resins | Depol NW-1640 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ester copolymer. This product has no influence on inter-adhesiveness in polymers and defoams well under low temperatures. Depol NW-1640 is used in solven...展开 Depol NW-1640 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ester copolymer. This product has no influence on inter-adhesiveness in polymers and defoams well under low temperatures. Depol NW-1640 is used in solvent and solvent-free epoxy coating systems, solvent and solvent-free urethane coating systems, and industrial baking systems. 收起 | |
| Depol NW-165 | Naewoi Korea Resins | Depol NW-165 is a defoaming and de-aerating additive for organic solvent systems. Its main component is a modified polysiloxane copolymer. It displays no gloss reduction of surface film. Depol NW-165 is used in wood coatings based on short oil alkyd, acry...展开 Depol NW-165 is a defoaming and de-aerating additive for organic solvent systems. Its main component is a modified polysiloxane copolymer. It displays no gloss reduction of surface film. Depol NW-165 is used in wood coatings based on short oil alkyd, acrylic lacquer, acrylic urethane coatings, chlorinated rubber, modified vinyl coatings, and medium and long oil enamel coatings. 收起 | |
| Depol NW-166H | Naewoi Korea Resins | Depol NW-166H is a defoaming and de-aerating additive. Its main component is a special high molecular compound. It displays deaerating properties during spraying, rolling and brushing coatings. Depol NW-166H is used in alkyd, melamine and NC lacquer coati...展开 Depol NW-166H is a defoaming and de-aerating additive. Its main component is a special high molecular compound. It displays deaerating properties during spraying, rolling and brushing coatings. Depol NW-166H is used in alkyd, melamine and NC lacquer coatings, 2-component urethane coatings, chlorinated rubber, epoxy coatings, and acrylic and alkyd air drying systems. 收起 | |
| Depol NW-172 | Naewoi Korea Resins | Depol NW-172 is a polymer type defoamer for solvent based systems. Its main component is a vinyl ether with a modified acryl copolymer. This product is effective for destroying micro-foam and shows acceptance and compatibility with coating resins. Depol N...展开 Depol NW-172 is a polymer type defoamer for solvent based systems. Its main component is a vinyl ether with a modified acryl copolymer. This product is effective for destroying micro-foam and shows acceptance and compatibility with coating resins. Depol NW-172 is used in unsaturated polyester and UV systems, PVC compounds, and 2-component epoxy coatings. 收起 | |
| Depol NW-192 | Naewoi Korea Resins | Depol NW-192 is a polymer type defoamer for solvent based systems. Its main component is a special high molecular compound. This product does not show haze in films it is added to, regardless of the amount added. Depol NW-192 is used in alkyd and lacquer ...展开 Depol NW-192 is a polymer type defoamer for solvent based systems. Its main component is a special high molecular compound. This product does not show haze in films it is added to, regardless of the amount added. Depol NW-192 is used in alkyd and lacquer fast air drying enamel systems, polyurethane and epoxy coatings, and chlorinated rubber and polyester high temperature baking systems. 收起 | |
| Depol NW-193 | Naewoi Korea Resins | Depol NW-193 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ether modified copolymer. This product does not show haze in films it is added to, regardless of the amount added. Depol NW-193 is used in alkyd and lacqu...展开 Depol NW-193 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ether modified copolymer. This product does not show haze in films it is added to, regardless of the amount added. Depol NW-193 is used in alkyd and lacquer fast air drying enamel systems, polyurethane and epoxy coatings, and chlorinated rubber and polyester high temperature baking systems. 收起 | |
| Depol NW-195 | Naewoi Korea Resins | Depol NW-195 is a polymer type defoamer for solvent based systems. Its main component is a high molecular vinyl ether with an ester copolymer. This product shows no gloss reduction during defoaming and also shows no separation between the coating and the ...展开 Depol NW-195 is a polymer type defoamer for solvent based systems. Its main component is a high molecular vinyl ether with an ester copolymer. This product shows no gloss reduction during defoaming and also shows no separation between the coating and the additive during long storage. Depol NW-195 is used in 2-component solvent and solvent free based urethane coatings, 2-component solvent and solvent-free based epoxy coatings, polyester acrylic baking systems, and polyester urethane UV curing coatings. 收起 | |
| Depol NW-2000 | Naewoi Korea Resins | Depol NW-2000 is a polymer type defoamer for solvent based systems. Its main component is a high molecular vinyl ether with ester copolymer. This product shows no separation between coatings and additives during long storage and also shows no gloss reduct...展开 Depol NW-2000 is a polymer type defoamer for solvent based systems. Its main component is a high molecular vinyl ether with ester copolymer. This product shows no separation between coatings and additives during long storage and also shows no gloss reduction during defoaming. Depol NW-2000 is used in alkyd and lacquer fast air drying enamel systems, polyurethane and epoxy coatings, and chlorinated rubber and polyester high temperature baking systems. 收起 | |
| Depol NW-289W | Naewoi Korea Resins | Depol NW-289W is a silicone type defoamer for water based systems. Its main component is a special polymer with a modified polysiloxane. It prevents foam during the manufacturing of coatings and has no influence on gloss or long-time color stability. Depo...展开 Depol NW-289W is a silicone type defoamer for water based systems. Its main component is a special polymer with a modified polysiloxane. It prevents foam during the manufacturing of coatings and has no influence on gloss or long-time color stability. Depol NW-289W is used in acrylic emulsions, water dispersing polyurethane systems, styrene modified acrylic emulsion systems, and water soluble adhesives. 收起 | |
| Depol NW-293W | Naewoi Korea Resins | Depol NW-293W is a silicone type defoamer for water based systems. Its main component is a special polymer with a polysiloxane copolymer. It is used as with high concentration tints and prevents foam during dispersion and the manufacturing of coatings. De...展开 Depol NW-293W is a silicone type defoamer for water based systems. Its main component is a special polymer with a polysiloxane copolymer. It is used as with high concentration tints and prevents foam during dispersion and the manufacturing of coatings. Depol NW-293W is used in water based acrylic emulsion systems, aqueous industrial coatings, aqueous pigment concentrates, and aqueous architectural coatings. 收起 | |
| Depol NW-294W | Naewoi Korea Resins | Depol NW-294W is a mineral type defoamer for water based systems. Its main component is a special organic compound. This product is a defoaming additive that prevents bubble and foam during the manufacturing of coatings. Depol NW-294W is used in water bas...展开 Depol NW-294W is a mineral type defoamer for water based systems. Its main component is a special organic compound. This product is a defoaming additive that prevents bubble and foam during the manufacturing of coatings. Depol NW-294W is used in water based acrylic emulsion systems, emulsion manufacturing, and building protection : coatings based on styrene-acrylic emulsions. 收起 | |
| Depol NW-295W | Naewoi Korea Resins | Depol NW-295W is a mineral type defoamer for water based systems. Its main component is a mineral oil compound with polysiloxane. This product is a defoaming additive that prevents bubbles and foam during the manufacturing of coatings. Depol NW-295W is us...展开 Depol NW-295W is a mineral type defoamer for water based systems. Its main component is a mineral oil compound with polysiloxane. This product is a defoaming additive that prevents bubbles and foam during the manufacturing of coatings. Depol NW-295W is used in gloss and semi-gloss emulsion systems, water based acrylic emulsion systems, and exterior wall paints. 收起 | |
| Depol NW-3000 | Naewoi Korea Resins | Depol NW-3000 is a polymer type defoamer for solvent based systems. Its main component is a special organic compound. This product shows initial defoaming properties. Depol NW-3000 is used in PVC plastisol systems. | |
| Depol NW-830S | Naewoi Korea Resins | Depol NW-830S is a mineral type defoamer for water based systems. Its main component is an aliphatic hydrocarbon. This product is a defoaming additive that prevents bubbles and foam during the manufacturing of coatings. Depol NW-830S is used in general in...展开 Depol NW-830S is a mineral type defoamer for water based systems. Its main component is an aliphatic hydrocarbon. This product is a defoaming additive that prevents bubbles and foam during the manufacturing of coatings. Depol NW-830S is used in general industrial coating systems, automotive coating systems, and wood coating systems. 收起 | |
| Epoben CO 74 | Benasedo | Epoben CO 74 is used in non-yellowing clear or pigmented baking finishes in combination with amino-resins. It has excellent adhesion, post-formability and chemical resistance. It is a 12-Hydroxy-stearic acid, with a 35% oil content. This product has a vis...展开 Epoben CO 74 is used in non-yellowing clear or pigmented baking finishes in combination with amino-resins. It has excellent adhesion, post-formability and chemical resistance. It is a 12-Hydroxy-stearic acid, with a 35% oil content. This product has a viscosity [G.H.] of X-Z, an A.V. solids amount of 0.5-1.5, and a colour [G.H.] maximum of 5. It has nitro applications. 收起 | |
| Epoben R 403 in Solvesso 100 | Benasedo | Epoben R 403 in Solvesso 100 contains 60% solids, has a viscosity [G.H.] of Z3-Z5, an A.V. solids content of 0.5-1.5, and a colour [G.H.] maximum of 6. It has air and bake applications. Epoben R 403 in Solvesso 100 is used in air-drying and baking primers...展开 Epoben R 403 in Solvesso 100 contains 60% solids, has a viscosity [G.H.] of Z3-Z5, an A.V. solids content of 0.5-1.5, and a colour [G.H.] maximum of 6. It has air and bake applications. Epoben R 403 in Solvesso 100 is used in air-drying and baking primers and enamels for industrial applications with excellent adhesion, alkali and solvent-resistant properties. It can also be used in zinc-rich rust-inhibitive primers. 收起 | |
| Epoben R 403 in Xylene | Benasedo | Epoben R 403 in Xylene is used in air-drying and baking primers and enamels for industrial applications with excellent adhesion, alkali and solvent-resistant properties. It can also be used in zinc-rich rust-inhibitive primers. This product has a 50% soli...展开 Epoben R 403 in Xylene is used in air-drying and baking primers and enamels for industrial applications with excellent adhesion, alkali and solvent-resistant properties. It can also be used in zinc-rich rust-inhibitive primers. This product has a 50% solids content, a viscosity [ G.H.] of T-V, an A.V. solids amount of 0.5-1.5, a color [G.H.] maximum of 6. It has bake and air applications. 收起 | |
| EPOFEN 2319 | Benasedo | EPOFEN 2319 is typically used in packaging coating applications where a pre-formulated coating system is desired or in wash coat applications. | |
| Epofen 254 | Benasedo | Epofen 254 is a clear binder, suggested for interior and exterior can coating AND paints endowed with excellent flexibility and very good chemical and solvent resistance. It is suitable for contact with food paints in compliance with U.S.A / F.D.A 175.300...展开 Epofen 254 is a clear binder, suggested for interior and exterior can coating AND paints endowed with excellent flexibility and very good chemical and solvent resistance. It is suitable for contact with food paints in compliance with U.S.A / F.D.A 175.300 and allows the formulators to produce pasteurization resistant varnishes. 收起 | |
| EPOFEN W 1205 | Benasedo | EPOFEN W 1205 is a self crosslinking, Water-dilutable Epoxy–Phenolic modified Resin, suitable for can coating applications. EPOFEN W 1205 is only made with Raw-Materials included in the Positive list of FDA 21 CFR 175.300. Our Resin can be used for food c...展开 EPOFEN W 1205 is a self crosslinking, Water-dilutable Epoxy–Phenolic modified Resin, suitable for can coating applications. EPOFEN W 1205 is only made with Raw-Materials included in the Positive list of FDA 21 CFR 175.300. Our Resin can be used for food contact paints only when the applied film is completely cross-linked and free of solvents, so that the content of extractable monomers becomes lower than the maximum allowed. 收起 | |
| EPOSOL 7 | Benasedo | EPOSOL 7 is suitable for can coating and drum paints when properly combined with Phenolic and/or melamine binders. | |
| EPOSOL 9 | Benasedo | EPOSOL 9 is endowed with very good flexibility hardness and chemical resistance properties. It should be in combination with Phenolic, Melamine or Polyamide binders. | |
| EPOSOL AP 100 | Benasedo | EPOSOL AP 100 is a special additive improving the adhesion and the elasticity in baking enamel for metal substrates. It is stable in colour and doesn’t have any influence on weather resistance properties of the paints. | |
| Hartben 405 | Benasedo | Hartben 405 is an armatic polymer and an ethyl acetate solvent, with an 80% solids content. This product has a viscosity [G.H.] of K-N and a colour [G.H.] maximum of 2. Hartben 405 is used in elastomeric polymers, plasticizers and adhesion promoters for n...展开 Hartben 405 is an armatic polymer and an ethyl acetate solvent, with an 80% solids content. This product has a viscosity [G.H.] of K-N and a colour [G.H.] maximum of 2. Hartben 405 is used in elastomeric polymers, plasticizers and adhesion promoters for nitrocellulose. It is also used in flexographic inks for paper and plastic substrates. 收起 | |
| Hartben 75 PS-T | Benasedo | Hartben 75 P/ST is an aromatic polyisocianate adduct endowed with high body, brightness and flexibility. It is suggested, alone or combined with other polyisocianate polymers, as crosslinker for hydroxylated binders in two – components systems. Hartben 75...展开 Hartben 75 P/ST is an aromatic polyisocianate adduct endowed with high body, brightness and flexibility. It is suggested, alone or combined with other polyisocianate polymers, as crosslinker for hydroxylated binders in two – components systems. Hartben 75 P/ST allows to produce sealers and finishes for furniture, floors and metals, when a good yellowing resistance is not particularly requested. 收起 | |
| Hartben A 75 | Benasedo | Hartben A 75 is used in two-component non-yellowing clear or pigmented finishes for wood and metals. It has high mechanical performance and durability. It is an Aliphatic polyisocyanurate, with a Xylene / M.P.A. solvent, and a 75% solids content. This pro...展开 Hartben A 75 is used in two-component non-yellowing clear or pigmented finishes for wood and metals. It has high mechanical performance and durability. It is an Aliphatic polyisocyanurate, with a Xylene / M.P.A. solvent, and a 75% solids content. This product has a viscosity of D-I, a free monomer of < 0.5%, and NCO of 14.5-16.5, and a colour [G.H.] maximum of 1. 收起 | |
| Hartben AM 29 | Benasedo | Hartben AM 29 is an Aliphatic-aromatic polyisocyanurate, with a butyl acetate solvent, and 60% solids. It has a free monomer of < 0.5%, an NCO of 10.4-10.8%, a colour [G.H.] maximum of 3, and a viscosity [G.H.] of O-R. Hartben AM 29 is used in polyurethan...展开 Hartben AM 29 is an Aliphatic-aromatic polyisocyanurate, with a butyl acetate solvent, and 60% solids. It has a free monomer of < 0.5%, an NCO of 10.4-10.8%, a colour [G.H.] maximum of 3, and a viscosity [G.H.] of O-R. Hartben AM 29 is used in polyurethane coatings with good colour retention, gloss, toughness and hardness. It is recommended for metals and wood. 收起 | |
| Hartben E 23 | Benasedo | Hartben E 23 is an Aromatic polyisocyanurate, with a butyl aacetate solvent, and a 50% solids content. This product has an NCO of 7.8-8.2%, a viscosity [G.H.] of H-J, a colour [G.H.] maximum of 2, and a free monomer of < 0.5%. Hartben E 23 is used in fast...展开 Hartben E 23 is an Aromatic polyisocyanurate, with a butyl aacetate solvent, and a 50% solids content. This product has an NCO of 7.8-8.2%, a viscosity [G.H.] of H-J, a colour [G.H.] maximum of 2, and a free monomer of < 0.5%. Hartben E 23 is used in fast-curing two-component sealers and finishes, by spray or curtain coating machine application, with good "pot-life" and lifting resistance. It has a wide compatibility with nitrocellulose. 收起 | |
| Hartben MC 53 | Benasedo | Hartben MC 53 is used in one-pack glossy and mat lacquers for parquets and concrete floors. This product is a moisture-curing aromatic prepolymer, with a Xylene/M.P.A. solvent and a 60% solids level. This product as a viscosity [G.H.] of K-O, a colour [G....展开 Hartben MC 53 is used in one-pack glossy and mat lacquers for parquets and concrete floors. This product is a moisture-curing aromatic prepolymer, with a Xylene/M.P.A. solvent and a 60% solids level. This product as a viscosity [G.H.] of K-O, a colour [G.H.] maximum of 3, an NCO of 6.0-6.5%, and a free monomer of 1% maximum. 收起 | |
| Hartben SV 100 | Benasedo | Hartben SV 100 is used in very fast-curing sealers with easy hand or mechanical sandability or plasticizing by adding Hartben 75 P/ST. This product is an Aliphatic polyisocyanurate, and contains 100% solids. It has an NCO of 21.5-22.0%, a free monomer of ...展开 Hartben SV 100 is used in very fast-curing sealers with easy hand or mechanical sandability or plasticizing by adding Hartben 75 P/ST. This product is an Aliphatic polyisocyanurate, and contains 100% solids. It has an NCO of 21.5-22.0%, a free monomer of < 0.3%, a color [G.H.] maximum of 1, and a viscosity [G.H.] of Z-Z3. 收起 | |
| Idroben 130 | Benasedo | Idroben 130 is used in industrial air-drying or bake enamels for tinting paste vehicles. IT has bake and catalyze applications. This product is made of drying fatty acids, is solvent in water, and has a 20% oil content. It has a white milky colour, a pH l...展开 Idroben 130 is used in industrial air-drying or bake enamels for tinting paste vehicles. IT has bake and catalyze applications. This product is made of drying fatty acids, is solvent in water, and has a 20% oil content. It has a white milky colour, a pH level of 6.5-7.5, and a viscosity [Brookf.] m Pa.s of 3000. 收起 | |
| Idroben 178 | Benasedo | Idroben 178 is used in very fast air-drying industrial finishes endowed with good mechanical characteristics. It has air and bake applications. It is an alkyd dispersion and contains special fatty acids, it is solvent in water, and has an oil content of 3...展开 Idroben 178 is used in very fast air-drying industrial finishes endowed with good mechanical characteristics. It has air and bake applications. It is an alkyd dispersion and contains special fatty acids, it is solvent in water, and has an oil content of 33%. This product has a viscosity [Brookf.] m Pa.s of 700-1300, a pH level of 7.3-7.8, and a white milky colour. 收起 | |
| Idroben 180 | Benasedo | Idroben 180 is used in industrial anticorrosive primers and fast drying finishes with good adhesion and mechanical characteristics. This product is an alkyd dispersion, contains drying fatty acids, is solvent in water, and has a 20% oil content. It is a w...展开 Idroben 180 is used in industrial anticorrosive primers and fast drying finishes with good adhesion and mechanical characteristics. This product is an alkyd dispersion, contains drying fatty acids, is solvent in water, and has a 20% oil content. It is a white milky colour, has a pH level of 7.0-8.0, a solids content of 44%, and a viscosity [Brookf.] m Pa.s of 700-1000. 收起 | |
| Idroben 201 | Benasedo | Idroben 201 is used in film-forming resins, that are very fast-drying, suggested for flexible sealers and finishes for wood, metals and plastics. No coalescent is required. It is a poliurethane dispersion and contains water solvent. This product contains ...展开 Idroben 201 is used in film-forming resins, that are very fast-drying, suggested for flexible sealers and finishes for wood, metals and plastics. No coalescent is required. It is a poliurethane dispersion and contains water solvent. This product contains 35% solids, has a viscosity [Brookf.] m Pa.s of 50-70, and has a pH level of 7.0=8.0. This product has bake and air applications. 收起 | |
| Idroben 202 | Benasedo | Idroben 202 is used in film-forming resins for sanding sealers and finishes for wood, metals and plastics. It has air and bake applications and no coalescent is required. This product is a poliurethane acrylic dispersion with a water solvent and a 37% sol...展开 Idroben 202 is used in film-forming resins for sanding sealers and finishes for wood, metals and plastics. It has air and bake applications and no coalescent is required. This product is a poliurethane acrylic dispersion with a water solvent and a 37% solids content. It has a viscosity [Brookf.] m Pa.s of 50-70, and a pH level of 7.0-8.0. 收起 | |
| IDROBEN 2026 | Benasedo | IDROBEN 2026 is a water-borne, non-yellowing saturated polyester, endowed with very good properties of reactivity, flexibility, build-up and adhesion. It is suggested, combined with amino-resins in oven industrial applications(130°C – 180°C), as vehicle f...展开 IDROBEN 2026 is a water-borne, non-yellowing saturated polyester, endowed with very good properties of reactivity, flexibility, build-up and adhesion. It is suggested, combined with amino-resins in oven industrial applications(130°C – 180°C), as vehicle for primers and top-coats, when high mechanical properties are required, like the in can-coating field. 收起 | |
| Idroben 207 | Benasedo | Idroben 207 is an antiyellowing and very fast drying film forming binder with good characteristics of flexibility, adhesion and hardness. It is suggested to formulate non-yellowing topcoats,clear or pigmented, for wood, metals and plastics. Idroben 207 ca...展开 Idroben 207 is an antiyellowing and very fast drying film forming binder with good characteristics of flexibility, adhesion and hardness. It is suggested to formulate non-yellowing topcoats,clear or pigmented, for wood, metals and plastics. Idroben 207 can be used in baking enamels, alone or crosslinked with amino- resins achieving good antiyellowing properties matched with noticeable chemical resistance properties. 收起 | |
| IDROBEN 2643 | Benasedo | IDROBEN 2643 is a self crosslinking, Water-dilutable Epoxy Resin Acrylic modified. It can also be combined with esametoxymelamine resins in the ratio 85/15 or 70/30 based on solid contents. | |
| IDROBEN 3519 | Benasedo | IDROBEN 3519 is a saturated polyester resin, water dilutable when neutralized with amines, endowed with very good properties of high build-up, gloss value, flow and hardness. It is suggested for oven industrial applications as vehicle for collapsible tube...展开 IDROBEN 3519 is a saturated polyester resin, water dilutable when neutralized with amines, endowed with very good properties of high build-up, gloss value, flow and hardness. It is suggested for oven industrial applications as vehicle for collapsible tube and can enamels. 收起 | |
| Idroben 4705 | Benasedo | Idroben 4705 is a high – solids, non-yellowing water-dilutable alkyd,endowed with good mechanical characteristics and gloss retention. It allows wide industrial applications, like air – drying primers and finishes or bake – coatings when crosslinked with ...展开 Idroben 4705 is a high – solids, non-yellowing water-dilutable alkyd,endowed with good mechanical characteristics and gloss retention. It allows wide industrial applications, like air – drying primers and finishes or bake – coatings when crosslinked with amino - resins. 收起 | |
| Idroben 4913 | Benasedo | Idroben 4913 is an acrylic emulsion used for clear and pigmented systems for indoor and outdoor, endowed with high body and glossy, particularly suggested for wood stains with good impregnating characteristics. It has air and bake applications. This produ...展开 Idroben 4913 is an acrylic emulsion used for clear and pigmented systems for indoor and outdoor, endowed with high body and glossy, particularly suggested for wood stains with good impregnating characteristics. It has air and bake applications. This product is an oil modified acrylic emulsion. It is a milky white colour, contains a solvent of water and butyl glycol, and has a 42% solids amount. Idroben 4913 has a pH level of 8,0-8.5, a viscosity [Brookf.] m Pa.s of < 250, and an MFT of 0℃. 收起 | |
| Idroben 827 | Benasedo | Idroben 827 is a fast air-drying, non-yellowing alkyd resin, water-dilutable when neutralized, endowed with good mechanical properties and gloss retention. It is suggested for formulating primers and topcoats for industrial equipments, applied by spraying...展开 Idroben 827 is a fast air-drying, non-yellowing alkyd resin, water-dilutable when neutralized, endowed with good mechanical properties and gloss retention. It is suggested for formulating primers and topcoats for industrial equipments, applied by spraying or dipping. 收起 | |
| Idroben 828 | Benasedo | Idroben 828 is used in non-yellowing, air-drying or baking enamels with high mechanical performance for stoving undercoats and primers. It has air and bake applications. This product is an alkyd special fatty acid, with a 30% oil content and a 75% solids ...展开 Idroben 828 is used in non-yellowing, air-drying or baking enamels with high mechanical performance for stoving undercoats and primers. It has air and bake applications. This product is an alkyd special fatty acid, with a 30% oil content and a 75% solids amount. Idroben 828 has a viscosity [G.H.] of Z4-Z6, an A.V. solids content of 37-44, and a colour [G.H.] maximum of 3. 收起 | |
| Idroben 878 | Benasedo | Idroben 878 is used in baking-curing primers or finishes with high characteristics of adhesion, flow and hardness. It is epoxy ester drying fatty acids, with an oil content of 48% and a solids amount of 70%. This product has a viscosity [G.H.] of Z1-Z3 (6...展开 Idroben 878 is used in baking-curing primers or finishes with high characteristics of adhesion, flow and hardness. It is epoxy ester drying fatty acids, with an oil content of 48% and a solids amount of 70%. This product has a viscosity [G.H.] of Z1-Z3 (60%) BG, a colour [G.H.] maximum, and an A.V. solids amount of 45-55. This product has bake applications. 收起 | |
| IDROBEN E 530 | Benasedo | IDROBEN E 530 is a self crosslinking, Water-dilutable Epoxy Resin Acrylic modified. It could be also combined with esametoxymelamine resins in the ratio 85/15 or 70/30 based on solid contents. | |
| Idroben EP 5595 | Benasedo | Idroben EP 5595 is an epoxy ester, acryl modified, drying fatty acid used for fast air and baking - curing primers or finishes with high characteristics of adhesion, flow and hardness. It contains 38% oil, 68% solids, and has a solvent of butylglycol. Thi...展开 Idroben EP 5595 is an epoxy ester, acryl modified, drying fatty acid used for fast air and baking - curing primers or finishes with high characteristics of adhesion, flow and hardness. It contains 38% oil, 68% solids, and has a solvent of butylglycol. This product has a colour [G.H.] maximum of 12, an A.V. solids content of 45-55, and a viscosity [G.H.] of Z-Z2. 收起 | |
| IDROBEN PD 7051 | Benasedo | IDROBEN PD 7051 is a solvent free hydroxylated aliphatic polyurethane dispersion. It is particularly indicated for formulating clear and pigmented waterborne enamels. Hydrophobic types could be also used to improve the overall performances of the formulat...展开 IDROBEN PD 7051 is a solvent free hydroxylated aliphatic polyurethane dispersion. It is particularly indicated for formulating clear and pigmented waterborne enamels. Hydrophobic types could be also used to improve the overall performances of the formulations. 收起 | |
| IDROBEN PD 717 | Benasedo | IDROBEN PD 717 is a special air-drying polyurethane resin with very fast drying properties. The addition of metallic dryers helps to improve the film properties. It is suggested for formulating clear and pigmented industrial primers and top coats for plas...展开 IDROBEN PD 717 is a special air-drying polyurethane resin with very fast drying properties. The addition of metallic dryers helps to improve the film properties. It is suggested for formulating clear and pigmented industrial primers and top coats for plastics (ABS.Polystyrene etc.), glass and metals, endowed with very good hardness, good resistance to organic solvents like gasoline and ethanol. 收起 | |
| IDROBEN PD 718 | Benasedo | IDROBEN PD 718 is a special non-yellowing polymer modified with aliphatic isocyanate. It’s a fast drying anionic dispersion, endowed with good elasticity, adhesion and hardness. The binder needs cosolvent in order to achieve a good film formation. IDROBE...展开 IDROBEN PD 718 is a special non-yellowing polymer modified with aliphatic isocyanate. It’s a fast drying anionic dispersion, endowed with good elasticity, adhesion and hardness. The binder needs cosolvent in order to achieve a good film formation. IDROBEN PD 718 is recommended for clear and pigmented topcoats, both for plastic, glass and metal substrates. It is very suitable to produce matt enamels for the decorative field, endowed with high superficial hardness. 收起 | |
| IDROBEN PD 723 40% W | Benasedo | IDROBEN PD 723 40% W s a special fast air-drying polyurethane resin, modified with non yellowing drying Fatty Acids. It is suggested for formulating clear and pigmented enamels used in the General industrial and Decorative fields or for plastics (ABS, Pol...展开 IDROBEN PD 723 40% W s a special fast air-drying polyurethane resin, modified with non yellowing drying Fatty Acids. It is suggested for formulating clear and pigmented enamels used in the General industrial and Decorative fields or for plastics (ABS, Polystyrene etc.) wood and metal substrates, endowed with Flexibility, adhesion, very good water and out door resistance. 收起 | |
| IDROBEN UV 737G | Benasedo | IDROBEN UV 737G shows good reactivity, balanced hardness and flexibility, matched with very good chemical and scratch resistance properties. The resin is characterized by very high gloss and body. It can be used in dual curing systems. | |
| Idroben UV 747 | Benasedo | Idroben UV 747 shows high reactivity good chemical resistance, balanced hardness and flexibility properties. The binder is particularly recommended for sealers and topcoats, though suitable for white pigmented sealers. The binders shows good adhesion on w...展开 Idroben UV 747 shows high reactivity good chemical resistance, balanced hardness and flexibility properties. The binder is particularly recommended for sealers and topcoats, though suitable for white pigmented sealers. The binders shows good adhesion on wood and MDF substartes and, in particolar cases, could be also used for metal. 收起 | |
| Idroben UV 76 | Benasedo | Idroben UV 76 is suitable for pigmented formulations due to its very high final hardness and good reactivity. This binder is tack free before the UV lamps. This product shows good reactivity with colours like yellow, red and black, and is difficult to be ...展开 Idroben UV 76 is suitable for pigmented formulations due to its very high final hardness and good reactivity. This binder is tack free before the UV lamps. This product shows good reactivity with colours like yellow, red and black, and is difficult to be cured under UV lamps. It also shows a very good yellowing resistance, so that it’s really suitable for white pigmented paints. Idroben UV 76 shows very good chemical resistances and could be also used for clear matte paints. 收起 | |
| ISOBEN 10 | Benasedo | ISOBEN 10 is an hydroxylated polyester resin suitable to be crosslinked with isocyanate prepolymers. It is considered a peculiar binder for wood top coats, metals and papers endowed with excellent colour retention, outdoor resistances, flexibility, gloss ...展开 ISOBEN 10 is an hydroxylated polyester resin suitable to be crosslinked with isocyanate prepolymers. It is considered a peculiar binder for wood top coats, metals and papers endowed with excellent colour retention, outdoor resistances, flexibility, gloss and build up. 收起 | |
| ISOBEN 11 | Benasedo | ISOBEN 11 is a hydroxylated saturated polyester resin, endowed with high characteristics of reactivity in two-components polyurethane systems, with very good mechanical and chemical resistances. It is suggested, also combined with other Isoben, to produce...展开 ISOBEN 11 is a hydroxylated saturated polyester resin, endowed with high characteristics of reactivity in two-components polyurethane systems, with very good mechanical and chemical resistances. It is suggested, also combined with other Isoben, to produce wood coatings for frames or parquets. 收起 | |
| ISOBEN 15 | Benasedo | ISOBEN 15 is a non yellowing hydroxilated polyester resin endowed with very good body, adhesion and flexibility properties. It’s designed for 2K glossy applications. It shows a very good compatibility with acrylic resins, so that it could be recommended f...展开 ISOBEN 15 is a non yellowing hydroxilated polyester resin endowed with very good body, adhesion and flexibility properties. It’s designed for 2K glossy applications. It shows a very good compatibility with acrylic resins, so that it could be recommended for car refinishing, industrial and wood paints also for marine outdoor applications, combined with aliphatic isocyanates. 收起 | |
| ISOBEN 168 | Benasedo | ISOBEN 168 is a high–solids non–yellowing saturated polyester, endowed with high–body, brightness, adhesion and flexibility. It is suggested for polyurethane lacquers for marine automotive industry, enamels for wood and metals with outdoor resistance. | |
| ISOBEN 5 | Benasedo | ISOBEN 5 is a saturated branched polyester with high hydroxyl content, suggested in two-component systems when adhesion, color and gloss retention, mechanical, outdoor and chemical resistances are particularly required. It is suggested for formulating pig...展开 ISOBEN 5 is a saturated branched polyester with high hydroxyl content, suggested in two-component systems when adhesion, color and gloss retention, mechanical, outdoor and chemical resistances are particularly required. It is suggested for formulating pigmented or clear finishes, for metals, in automotive industry, marine superstructures and concrete manucfatures . 收起 | |
| ISOBEN 6 | Benasedo | ISOBEN 6 is a non–yellowing saturated polyester, endowed with high–body, brightness, adhesion and flexibility. In combination with aliphatic polyisocianates, provides films having very good gloss and colour retention. | |
| ISOBEN 87 | Benasedo | ISOBEN 87 is a non–yellowing saturated polyester, endowed with high-body, brightness, adhesion and flexibility. It is suggested for formulating pigmented or clear finishes, for wood, easyly polishing; crosslinked with aliphatic polyisocianates, to obtain ...展开 ISOBEN 87 is a non–yellowing saturated polyester, endowed with high-body, brightness, adhesion and flexibility. It is suggested for formulating pigmented or clear finishes, for wood, easyly polishing; crosslinked with aliphatic polyisocianates, to obtain high–quality enamels for metals, suitable both for interior and exterior applications. 收起 | |
| NW 230-20 | Naewoi Korea Resins | NW 230-20 is an additive for anti-settling in water-based and organic solvent systems. Its main component is a special nitrogen contained compound. It has thixotropic properties in a wide range of coating systems and can be dispersed in a wide range of t...展开 NW 230-20 is an additive for anti-settling in water-based and organic solvent systems. Its main component is a special nitrogen contained compound. It has thixotropic properties in a wide range of coating systems and can be dispersed in a wide range of temperatures. NW 230-20 can be used in metallic and mica type industrial coatings, high build type heavy-duty coatings, and tar epoxy, tar urethane, pure epoxy and chlorinated rubber coatings. 收起 | |
| NW 240-20 | Naewoi Korea Resins | NW 240-20 is an additive for anti-settling in water-based and organic solvent systems. Its main component is a special nitrogen contained compound. It has thixotropic properties in a wide range of coating systems and has no influence on inter-adhesive pr...展开 NW 240-20 is an additive for anti-settling in water-based and organic solvent systems. Its main component is a special nitrogen contained compound. It has thixotropic properties in a wide range of coating systems and has no influence on inter-adhesive properties for system coatings. NW 240-20 can be used in metallic and mica type general industrial coatings, high build type of heavy-duty coatings, and tar epoxy, tar urethane, pure epoxy and chlorinated rubber coatings. 收起 | |
| NW 290-20 | Naewoi Korea Resins | NW 290-20 is an additive for anti-settling in water-based and organic solvent systems. Its main component is a special nitrogen contained compound. It is also used to add flow control properties to the substance it is added to. NW 290-20 can be used in au...展开 NW 290-20 is an additive for anti-settling in water-based and organic solvent systems. Its main component is a special nitrogen contained compound. It is also used to add flow control properties to the substance it is added to. NW 290-20 can be used in automotive refinish coating systems, alkyd and acrylic melamine based general industrial coatings, alkyd and polyester modified heat resistant coatings, chlorinated rubber and wash primer coatings, and high build type epoxy based heavy-duty coatings. 收起 | |
| NW 300-20 | Naewoi Korea Resins | NW 300-20 is an additive for anti-settling in water-based and organic solvent systems. Its main component is a special nitrogen contained compound. It is also used to add flow control properties to the substance it is added to, such as anti-settling and a...展开 NW 300-20 is an additive for anti-settling in water-based and organic solvent systems. Its main component is a special nitrogen contained compound. It is also used to add flow control properties to the substance it is added to, such as anti-settling and anti-sagging. NW 300-20 can be used in automotive refinish coating systems, alkyd and acrylic melamine based general industrial coatings, alkyd and polyester modified heat resistant coatings, chlorinated rubber and wash primer coatings, and high build type epoxy based heavy-duty coatings. 收起 | |
| NW 420-20 | Naewoi Korea Resins | NW 420-20 is an additive for anti-settling in water-based and organic solvent systems. Its main component is polyolefine wax. It displays settlement and anti-settling properties to the substance it is added to and also induces viscosity stability in long ...展开 NW 420-20 is an additive for anti-settling in water-based and organic solvent systems. Its main component is polyolefine wax. It displays settlement and anti-settling properties to the substance it is added to and also induces viscosity stability in long term storage. NW 420-20 can be used in short, medium and long oil alkyd coatings, alkyd and acrylic high temperature baking systems, red lead, zinc chromate and zinc rich paints, and heat resistant coatings and wash primer coatings. 收起 | |
| NW-100 | Naewoi Korea Resins | NW-100 is an additive to improve levelling in organic solvent systems. Its main component is a high boiling hydrocarbon and ester compound. It is used to improve gloss, and is workable with print inks. NW-100 can be used in acrylic, alkyd melamine high te...展开 NW-100 is an additive to improve levelling in organic solvent systems. Its main component is a high boiling hydrocarbon and ester compound. It is used to improve gloss, and is workable with print inks. NW-100 can be used in acrylic, alkyd melamine high temperature baking systems, vinyl, acrylic and NC lacquer coatings, air drying chlorinated rubber systems, and epoxy air drying systems. 收起 | |
| NW-1000 | Naewoi Korea Resins | NW-1000 is an additive for anti-settling in water-based and organic solvent systems. Its main component is high molecular fatty acid ester copolymer. It has no influence on inter-adhesiveness and provides thixotropic properties for coating systemsand can ...展开 NW-1000 is an additive for anti-settling in water-based and organic solvent systems. Its main component is high molecular fatty acid ester copolymer. It has no influence on inter-adhesiveness and provides thixotropic properties for coating systemsand can be dispersed in a wide range of temperatures. NW-1000 can be used in automotive refinish coating systems, alkyd and acrylic melamine based general industrial coatings, metallic coatings, alkyd polyester modified heat resistant coatings, chlorinated rubber and wash primer coatings, and high build type epoxy based heavy-duty coatings. 收起 | |
| NW-108 | Naewoi Korea Resins | NW-108 is an additive to improve levelling in organic solvent systems. Its main component is a high boiling hydrocarbon and ester compound. It is used to improve brush marks in fast drying lacquer coatings and has a protecting effect for enamel baking sys...展开 NW-108 is an additive to improve levelling in organic solvent systems. Its main component is a high boiling hydrocarbon and ester compound. It is used to improve brush marks in fast drying lacquer coatings and has a protecting effect for enamel baking systems. NW-108 can be used in acrylic and alkyd melamine high temperature baking systems, polyurethane and epoxy air drying systems, air drying chlorinated rubber systems, and air drying lacquer systems. 收起 | |
| NW-1100 | Naewoi Korea Resins | NW-1100 is an additive for anti-settling in water-based and organic solvent systems. Its main component is a synthetic wax copolymer. It improves the orientation of aluminum coatings and also increases the surface stability of regular coatings. NW-1100 ca...展开 NW-1100 is an additive for anti-settling in water-based and organic solvent systems. Its main component is a synthetic wax copolymer. It improves the orientation of aluminum coatings and also increases the surface stability of regular coatings. NW-1100 can be used in plastic coatings, alkyd and acrylic melamine based general industrial coatings, and acrylics and acrylic urethane coatings. 收起 | |
| NW-1200 | Naewoi Korea Resins | NW-1200 is an additive for anti-settling in water-based and organic solvent systems. Its main component is a synthetic wax copolymer. It improves the orientation of aluminum coatings and also improves slip and scratch resistance. NW-1200 can be used in pl...展开 NW-1200 is an additive for anti-settling in water-based and organic solvent systems. Its main component is a synthetic wax copolymer. It improves the orientation of aluminum coatings and also improves slip and scratch resistance. NW-1200 can be used in plastic coatings, alkyd and acrylic melamine based general industrial coatings, and acrylics and acrylic urethane coatings. 收起 | |
| NW-1300 | Naewoi Korea Resins | NW-1300 is an additive for anti-settling in water-based and organic solvent systems. Its main component is a synthetic wax copolymer. It improves the orientation of aluminum and mica coatings and also increases surface stability. NW-1300 can be used in pl...展开 NW-1300 is an additive for anti-settling in water-based and organic solvent systems. Its main component is a synthetic wax copolymer. It improves the orientation of aluminum and mica coatings and also increases surface stability. NW-1300 can be used in plastic coatings, solvent based base coat and metallic top coats, and automotive refinish coating systems. 收起 | |
| NW-1310 | Naewoi Korea Resins | NW-1310 is an additive for anti-settling in water-based and organic solvent systems. Its main component is a synthetic wax copolymer. It improves the orientation of aluminum coatings and also increases surface stability, and slip and scratch resistance. N...展开 NW-1310 is an additive for anti-settling in water-based and organic solvent systems. Its main component is a synthetic wax copolymer. It improves the orientation of aluminum coatings and also increases surface stability, and slip and scratch resistance. NW-1310 can be used in plastic coatings, solvent based base coat and metallic top coats, and automotive refinish coating systems. 收起 | |
| NW-139 | Naewoi Korea Resins | NW-139 is an additive to improve levelling and anti-cratering in organic solvent systems. Its main component is a high molecular modified acrylic ester copolymer. It is used to improve gloss, defoaming, anti-flooding and surface leveling for acrylic bakin...展开 NW-139 is an additive to improve levelling and anti-cratering in organic solvent systems. Its main component is a high molecular modified acrylic ester copolymer. It is used to improve gloss, defoaming, anti-flooding and surface leveling for acrylic baking systems. NW-139 can be used in acrylic and alkyd melamine high temperature baking systems, acrylic and acrylic urethane coatings, and organic solvent coating systems. 收起 | |
| NW-1400 | Naewoi Korea Resins | NW-1400 is an additive for anti-settling in water-based and organic solvent systems. Its main component is a solution of a modified urea. It is a liquid rheological type substance and offers thixotropic, flow control and antisettling properties. NW-1400 c...展开 NW-1400 is an additive for anti-settling in water-based and organic solvent systems. Its main component is a solution of a modified urea. It is a liquid rheological type substance and offers thixotropic, flow control and antisettling properties. NW-1400 can be used in architectural coatings, general industrial coatings, and high build type heavy-duty coatings. 收起 | |
| NW-1700 | Naewoi Korea Resins | NW-1700 is an additive for anti-settling in water-based and organic solvent systems. Its main component is a modified thermosetting acrylic resin. It provides outdoor durability and chip resistance and also enhances hardness and gloss for coatings. NW-170...展开 NW-1700 is an additive for anti-settling in water-based and organic solvent systems. Its main component is a modified thermosetting acrylic resin. It provides outdoor durability and chip resistance and also enhances hardness and gloss for coatings. NW-1700 can be used in Automotive OEM clear coats and solid color topcoats, and industrial storing systems. 收起 | |
| NW-1900 | Naewoi Korea Resins | NW-1900 is an additive for anti-settling in water-based and organic solvent systems. Its main component is a modified polyester resin. It provides rheology control and improves the orientation of metallic pigments. NW-1900 can be used in plastic coatings,...展开 NW-1900 is an additive for anti-settling in water-based and organic solvent systems. Its main component is a modified polyester resin. It provides rheology control and improves the orientation of metallic pigments. NW-1900 can be used in plastic coatings, automotive coating systems, and solvent based base coats and metallic top coats. 收起 | |
| NW-222 | Naewoi Korea Resins | NW-222 is an additive for anti-settling in water-based and organic solvent systems. Its main component is a special nitrogen contained compound. It has thixotropic properties in a wide range of coating systems and can be dispersed in a wide range of temp...展开 NW-222 is an additive for anti-settling in water-based and organic solvent systems. Its main component is a special nitrogen contained compound. It has thixotropic properties in a wide range of coating systems and can be dispersed in a wide range of temperatures. NW-222 can be used in metallic and mica type general industrial coatings, marine coatings and high build type of heavy-duty coatings, and tar epoxy, tar urethane, pure epoxy and chlorinated rubber coatings. 收起 | |
| NW-2500 | Naewoi Korea Resins | NW-2500 is an additive for anti-settling in water-based and organic solvent systems. Its main component is a high molecular carboxylic acid ester copolymer. It has thickening and antisagging properties and can be dispersed under a room temperature post-p...展开 NW-2500 is an additive for anti-settling in water-based and organic solvent systems. Its main component is a high molecular carboxylic acid ester copolymer. It has thickening and antisagging properties and can be dispersed under a room temperature post-production. It can be used in medium and long oil alkyd coatings, fast air drying enamel and chlorinated rubber systems, short oil alkyd lacquer coatings, and water based and water soluble alkyd air drying and baking systems. 收起 | |
| NW-270 | Naewoi Korea Resins | NW-270 is an additive to improve levelling and anti-cratering in organic solvent systems. Its main component is a high molecular vinyl ether modified acrylic ester copolymer. It is used to improve gloss and limits disturbance during roll coating. NW-270 c...展开 NW-270 is an additive to improve levelling and anti-cratering in organic solvent systems. Its main component is a high molecular vinyl ether modified acrylic ester copolymer. It is used to improve gloss and limits disturbance during roll coating. NW-270 can be used in alkyd, acrylic and polyester high temperature baking systems, acrylic air drying and acrylic urethane low temperature baking systems, solvent and solvent free based epoxy coatings, and high polymer coatings for coil coatings. 收起 | |
| NW-277 | Naewoi Korea Resins | NW-277 is an additive to improve levelling and anti-cratering in organic solvent systems. Its main component is a high molecular modified acrylic ester copolymer. It is used to improve gloss and improve substrate wetting. NW-277 can be used in alkyd, acry...展开 NW-277 is an additive to improve levelling and anti-cratering in organic solvent systems. Its main component is a high molecular modified acrylic ester copolymer. It is used to improve gloss and improve substrate wetting. NW-277 can be used in alkyd, acrylic and polyester high temperature baking systems, polyurethane coatings and air-dried alkyd systems, and epoxy, polyester and acrylic powder coatings. 收起 | |
| NW-3150 | Naewoi Korea Resins | NW-3150 is an additive for anti-settling in water-based and organic solvent systems. Its main component is a polyurethane copolymer. It is a thickener for water-based systems and is a polymer associated with hydrophilic and hydrophobic chain structure typ...展开 NW-3150 is an additive for anti-settling in water-based and organic solvent systems. Its main component is a polyurethane copolymer. It is a thickener for water-based systems and is a polymer associated with hydrophilic and hydrophobic chain structure types. NW-3150 can be used in synthetic latex coating systems, emulsion type adhesives, and water-borne emulsion paint systems. 收起 | |
| NW-3170 | Naewoi Korea Resins | NW-3170 is an additive for anti-settling in water-based and organic solvent systems. Its main component is a polyurethane copolymer. It is a thickener for water-based systems and is a polymer associated with hydrophilic and hydrophobic chain structure typ...展开 NW-3170 is an additive for anti-settling in water-based and organic solvent systems. Its main component is a polyurethane copolymer. It is a thickener for water-based systems and is a polymer associated with hydrophilic and hydrophobic chain structure types. NW-3170 can be used in synthetic latex coating systems, emulsion type adhesives, and water-borne emulsion paint systems. 收起 | |
| NW-3180 | Naewoi Korea Resins | NW-3180 is an additive for anti-settling in water-based and organic solvent systems. Its main component is a polyurethane copolymer. It is a thickener for water-based systems and is a polymer associated with hydrophilic and hydrophobic chain structure typ...展开 NW-3180 is an additive for anti-settling in water-based and organic solvent systems. Its main component is a polyurethane copolymer. It is a thickener for water-based systems and is a polymer associated with hydrophilic and hydrophobic chain structure types. NW-3180 can be used in synthetic latex coating systems, emulsion type adhesives, and water-borne emulsion paint systems. 收起 | |
| NW-320P | Naewoi Korea Resins | NW-320P is an additive for anti-settling in water-based and organic solvent systems. It provides a thixotropic, anti-sagging and anti-settling properties, is workable, and provides VOC reduction. NW-320P can be used in 2-component epoxy coatings, 2-compon...展开 NW-320P is an additive for anti-settling in water-based and organic solvent systems. It provides a thixotropic, anti-sagging and anti-settling properties, is workable, and provides VOC reduction. NW-320P can be used in 2-component epoxy coatings, 2-component urethane coatings, chlorinated rubber and vinyl modified resin coatings, and acrylic and alkyd resin coatings. 收起 | |
| NW-344W | Naewoi Korea Resins | NW-344W is an additive to improve levelling in water soluble coatings. Its main component is a compound of surface active low molecular weight polymer. It is used to prevent bubbles and biling marks in baking systems, as well as improving gloss and anti-f...展开 NW-344W is an additive to improve levelling in water soluble coatings. Its main component is a compound of surface active low molecular weight polymer. It is used to prevent bubbles and biling marks in baking systems, as well as improving gloss and anti-flooding. NW-344W can be used in general industrial coating systems, automotive coating systems, and wood coating systems. 收起 | |
| NW-360W | Naewoi Korea Resins | NW-360W is an additive to improve levelling in water based systems. Its main component is a polyacrylate solution. It is used to prevent blocking for drying films, and to prevent cratering for surface films. NW-360W can be used in water soluble alkyd and ...展开 NW-360W is an additive to improve levelling in water based systems. Its main component is a polyacrylate solution. It is used to prevent blocking for drying films, and to prevent cratering for surface films. NW-360W can be used in water soluble alkyd and acrylic baking systems, automotive top and primer coatings in water based systems, and industrial coatings in water based systems. 收起 | |
| NW-440 | Naewoi Korea Resins | NW-440 is an additive for anti-settling in water-based and organic solvent systems. Its main component is polyolefine wax. It provides viscosity and dispersion stability, anti-sagging, and anti-settling properties to the substance it is added to. NW-440 c...展开 NW-440 is an additive for anti-settling in water-based and organic solvent systems. Its main component is polyolefine wax. It provides viscosity and dispersion stability, anti-sagging, and anti-settling properties to the substance it is added to. NW-440 can be used in short, medium and long oil alkyd coatings, alkyd and acrylic high temperature baking systems, red lead, zinc chromate and zinc rich paints, and heat resistant coatings and wash primer coatings. 收起 | |
| NW-46L | Naewoi Korea Resins | NW-46L is an additive to improve levelling in organic solvent systems. Its main component is an acrylic ester copolymer. It is used for improving levelling and defoaming, and prevents defects that lead to curtain coatings ripping when wet. NW-46L can be u...展开 NW-46L is an additive to improve levelling in organic solvent systems. Its main component is an acrylic ester copolymer. It is used for improving levelling and defoaming, and prevents defects that lead to curtain coatings ripping when wet. NW-46L can be used in acid catalysts curing unsaturated polyester coatings, UV curing unsaturated polyester coatings, and polyester powder coatings. 收起 | |
| NW-50 | Naewoi Korea Resins | NW-50 is an additive to improve levelling in organic solvent systems. Its main component is a polyether modified acrylic copolymer. It is used for improving levelling, DOI and anti-flooding, and has compatibility with coating resins. NW-50 can be used in ...展开 NW-50 is an additive to improve levelling in organic solvent systems. Its main component is a polyether modified acrylic copolymer. It is used for improving levelling, DOI and anti-flooding, and has compatibility with coating resins. NW-50 can be used in alkyd, acrylic, and polyester high temperature baking systems, 2-component acrylic urethane and polyurethane coatings, and epoxy coatings. 收起 | |
| NW-500HP | Naewoi Korea Resins | NW-500HP is a wetting and dispersing additive for anti-settling in organic solvent systems. It improves gloss and anti-flooding, and has superior dispersing and storage stability in co-grinding systems for organic and inorganic pigments. NW-500HP is used ...展开 NW-500HP is a wetting and dispersing additive for anti-settling in organic solvent systems. It improves gloss and anti-flooding, and has superior dispersing and storage stability in co-grinding systems for organic and inorganic pigments. NW-500HP is used in oil alkyd coatings, chlorinated rubber, epoxy coatings, and alkyd, acrylic, and polyester baking systems. 收起 |
