| Dehydran® P 3615 | BASF Formulation Additives 巴斯夫配方助剂 | 基于烷基聚醚和改性脂肪族化合物的乳液配方用抑泡消泡剂。 | |
| Depol NW OC-128 | Naewoi Korea Resins | Depol NW-3000 is a polymer type defoamer for solvent based systems. Depol NW-3000 shows defoaming and deaerating for products that range from air drying systems to high temperature baking systems. | |
| Depol NW-111W | Naewoi Korea Resins | Depol NW-111W is a mineral type defoamer for water based systems. This product is a defoaming additive that prevents bubble and foam during the manufacturing of coatings. Depol NW-111W is used in water based acrylic emulsion systems, water soluble adhesiv...展开 Depol NW-111W is a mineral type defoamer for water based systems. This product is a defoaming additive that prevents bubble and foam during the manufacturing of coatings. Depol NW-111W is used in water based acrylic emulsion systems, water soluble adhesives, and water soluble coatings. 收起 | |
| Depol NW-112W | Naewoi Korea Resins | Depol NW-112W is a silicone type defoamer for water based systems. Its main component is a paraffin based mineral oil, containing silicone. It displays initial defoaming properties and shows no remaining bubble formation during defoaming. Depol NW-112W is...展开 Depol NW-112W is a silicone type defoamer for water based systems. Its main component is a paraffin based mineral oil, containing silicone. It displays initial defoaming properties and shows no remaining bubble formation during defoaming. Depol NW-112W is used in styrene modified acrylic emulsion systems, water based and water soluble enamel backing systems, and acrylic emulsion and water dispersing polyurethane systems. 收起 | |
| Depol NW-119W | Naewoi Korea Resins | Depol NW-119W is a silicone type defoamer for water based systems. Its main component is a polysiloxane and special polymer. It prevents foam during the manufacturing of coatings and shows no discoloration of tinting paints. Depol NW-119W is used in styre...展开 Depol NW-119W is a silicone type defoamer for water based systems. Its main component is a polysiloxane and special polymer. It prevents foam during the manufacturing of coatings and shows no discoloration of tinting paints. Depol NW-119W is used in styrene modified acrylic emulsion systems, acrylic emulsion and water dispersing polyurethane systems, and natural and synthetic latex coatings. 收起 | |
| Depol NW-120W | Naewoi Korea Resins | Depol NW-120W is a polymer type defoamer for water based systems. This product provides defoaming or deaerating to products that it is added to. Depol NW-120W is used in water-based clear coating systems, 2-component polyurethane, high viscosity emulsion ...展开 Depol NW-120W is a polymer type defoamer for water based systems. This product provides defoaming or deaerating to products that it is added to. Depol NW-120W is used in water-based clear coating systems, 2-component polyurethane, high viscosity emulsion and water-based UV coating systems. 收起 | |
| Depol NW-121W | Naewoi Korea Resins | Depol NW-121W is a silicone type defoamer for water based systems. Its main component is a special polymer with a polysiloxane copolymer. It is for acrylic emulsion and superior deaerating performance. Depol NW-121W is used in water based acrylic emulsion...展开 Depol NW-121W is a silicone type defoamer for water based systems. Its main component is a special polymer with a polysiloxane copolymer. It is for acrylic emulsion and superior deaerating performance. Depol NW-121W is used in water based acrylic emulsion systems, aqueous plastic coatings, aqueous furniture coatings, and aqueous automotive coatings. 收起 | |
| Depol NW-123W | Naewoi Korea Resins | Depol NW-123W is a silicone type defoamer for water based systems. Its main component is a special polymer with polysiloxane. It is stable in a wide range of pH and has no cratering problem during defoaming. Depol NW-123W is used in styrene modified acryl...展开 Depol NW-123W is a silicone type defoamer for water based systems. Its main component is a special polymer with polysiloxane. It is stable in a wide range of pH and has no cratering problem during defoaming. Depol NW-123W is used in styrene modified acrylic emulsion systems, and exterior wall paints. 收起 | |
| Depol NW-124W | Naewoi Korea Resins | Depol NW-124W is a silicone type defoamer for water based systems. Its main component is a special polymer with a polysiloxane copolymer. It does not cause a gloss reduction or discoloration during defoaming or deaerating. Depol NW-124W is used in water b...展开 Depol NW-124W is a silicone type defoamer for water based systems. Its main component is a special polymer with a polysiloxane copolymer. It does not cause a gloss reduction or discoloration during defoaming or deaerating. Depol NW-124W is used in water based acrylic emulsion systems, aqueous industrial coatings, aqueous pigment concentrates, and aqueous architecture coatings. 收起 | |
| Depol NW-126F | Naewoi Korea Resins | Depol NW-126F is a polymer type defoamer for solvent based systems. Its main component is a vinyl ether with acrylic ester copolymer. This product is used for defoaming during the initial stage and low temperatures for solvent-free based, high-build type ...展开 Depol NW-126F is a polymer type defoamer for solvent based systems. Its main component is a vinyl ether with acrylic ester copolymer. This product is used for defoaming during the initial stage and low temperatures for solvent-free based, high-build type of coatings, and it improves gloss and levelling. This product is used in 2-component solvent and solvent free based epoxy coatings, 2-component solvent and solvent free based urethane coatings, and general industrial high temperature baking systems. 收起 | |
| Depol NW-127W | Naewoi Korea Resins | Depol NW-127W is a polymer type defoamer for water based systems. The main component is a special organic compound. This product is a mineral oil free and silicone free defoamer and also shows no remaining bubble formation during defoaming. Depol NW-127W ...展开 Depol NW-127W is a polymer type defoamer for water based systems. The main component is a special organic compound. This product is a mineral oil free and silicone free defoamer and also shows no remaining bubble formation during defoaming. Depol NW-127W is used in aqueous baking industrial coatings, acrylic emulsion and water dispersing polyurethane systems, aqueous automotive coating systems, and aqueous architecture coating systems. 收起 | |
| Depol NW-128 | Naewoi Korea Resins | Depol NW-128 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ether with an ester copolymer. This product is used for defoaming during the initial stage and low temperatures for solvent-free based, high-build type of...展开 Depol NW-128 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ether with an ester copolymer. This product is used for defoaming during the initial stage and low temperatures for solvent-free based, high-build type of coatings, and it improves gloss and levelling. Depol NW-128 is used in alkyd, acrylic and polyester melamine high temperature baking systems, acrylic urethane, epoxy and polyurethane coatings, and coil coatings. 收起 | |
| Depol NW-128W | Naewoi Korea Resins | Depol NW-128W is a silicone type defoamer for water based systems. Its main component is a special polymer with a polysiloxane. It prevents foam during the manufacturing of coatings and has an initial defoaming property. Depol NW-128W is used in acrylic e...展开 Depol NW-128W is a silicone type defoamer for water based systems. Its main component is a special polymer with a polysiloxane. It prevents foam during the manufacturing of coatings and has an initial defoaming property. Depol NW-128W is used in acrylic emulsions, water dispersing polyurethane systems, water based and water soluble enamel baking systems, and automotive coatings. 收起 | |
| Depol NW-130 | Naewoi Korea Resins | Depol NW-130 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ether with a modified acrylic copolymer. This product deaerates during high temperature baking and does not cause a gloss reduction. Depol NW-130 is used ...展开 Depol NW-130 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ether with a modified acrylic copolymer. This product deaerates during high temperature baking and does not cause a gloss reduction. Depol NW-130 is used in alkyd and polyester baking systems, 1,2-component acrylic and acrylic baking systems, chlorinated rubber and epoxy coatings, and linear polyester coatings. 收起 | |
| Depol NW-133 | Naewoi Korea Resins | Depol NW-133 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ether with a modified acrylic copolymer. This product helps deaerate during high temperature baking and has no influence on inter-adhesive properties as a...展开 Depol NW-133 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ether with a modified acrylic copolymer. This product helps deaerate during high temperature baking and has no influence on inter-adhesive properties as a polymer type. Depol NW-133 is used in alkyd, acrylic and polyester melamine high temperature baking systems, acrylic urethane coatings, solvent and solvent free based epoxy coatings, and acid catalyst and coil coating systems. 收起 | |
| Depol NW-133W | Naewoi Korea Resins | Depol NW-133W is a mineral type defoamer for water based systems. This product is a defoaming additive that prevents bubble and foam during the manufacturing of coatings. Depol NW-133W is used in highly filled emulsion paints, water based acrylic emulsion...展开 Depol NW-133W is a mineral type defoamer for water based systems. This product is a defoaming additive that prevents bubble and foam during the manufacturing of coatings. Depol NW-133W is used in highly filled emulsion paints, water based acrylic emulsion systems, and exterior wall paints. 收起 | |
| Depol NW-137 | Naewoi Korea Resins | Depol NW-137 is a polymer type defoamer for solvent based systems. Its main component is a vinyl ether with a modified acrylic copolymer. This product improves levelling and anti-flooding and also has no influence on inter-adhesive properties in polymers....展开 Depol NW-137 is a polymer type defoamer for solvent based systems. Its main component is a vinyl ether with a modified acrylic copolymer. This product improves levelling and anti-flooding and also has no influence on inter-adhesive properties in polymers. Depol NW-137 is used in alkyd, acrylic and polyester high temperature baking systems, acrylic lacquer and acrylic urethane coatings, chlorinated rubber and epoxy coatings, and acid catalyst and coil coating systems. 收起 | |
| Depol NW-138 | Naewoi Korea Resins | Depol NW-138 is a polymer type defoamer for solvent based systems. Its main component is a modified olefin polymer. This product does not cause a gloss reduction or cratering problem during defoaming or dearating. Depol NW-138 is used in coil coatings, al...展开 Depol NW-138 is a polymer type defoamer for solvent based systems. Its main component is a modified olefin polymer. This product does not cause a gloss reduction or cratering problem during defoaming or dearating. Depol NW-138 is used in coil coatings, alkyd baking systems, polyester melamine high temperature baking systems, and acrylic baking systems. 收起 | |
| Depol NW-140S | Naewoi Korea Resins | Depol NW-140S is a defoaming and de-aerating additive for organic solvent systems. Its main component is a special polymer with polysiloxane copolymer. It provides superior defoaming and deaerating properties is also a solvent free type and improves gloss...展开 Depol NW-140S is a defoaming and de-aerating additive for organic solvent systems. Its main component is a special polymer with polysiloxane copolymer. It provides superior defoaming and deaerating properties is also a solvent free type and improves gloss, slip and levelling. Depol NW-140S is used in 2-component solvent and solvent free based epoxy coatings, 2-component solvent and solvent free based urethane coatings, and general industrial high temperature baking systems. 收起 | |
| Depol NW-147W | Naewoi Korea Resins | Depol NW-147W is a mineral type defoamer for water based systems. Its main component is a paraffinic mineral oil in combination with emulsifiers and silicone. This product is a defoaming additive that prevents bubble and foam during the manufacturing of ...展开 Depol NW-147W is a mineral type defoamer for water based systems. Its main component is a paraffinic mineral oil in combination with emulsifiers and silicone. This product is a defoaming additive that prevents bubble and foam during the manufacturing of coatings. Depol NW-147W is used in styrene modified acrylic emulsion systems, acrylic emulsions, water dispersing polyurethane systems, and the production of emulsion binders. 收起 | |
| Depol NW-151 | Naewoi Korea Resins | Depol NW-151 is a defoaming and de-aerating additive for organic solvent systems. Its main component is a special polymer with polysiloxane copolymer. It displays defoaming and deaerating properties. Depol NW-151 is used in wood coatings based on short oi...展开 Depol NW-151 is a defoaming and de-aerating additive for organic solvent systems. Its main component is a special polymer with polysiloxane copolymer. It displays defoaming and deaerating properties. Depol NW-151 is used in wood coatings based on short oil alkyd wood coatings based on polyurethane, fast drying enamel coatings based on acrylic lacquer, vinyl resin, polyester-melamine high temperature baking systems, and flooring and can coatings based on epoxy. 收起 | |
| Depol NW-156 | Naewoi Korea Resins | Depol NW-156 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ester copolymer. This product performs well in regards to deaerating during the spraying, rolling, and brushing of coatings. Depol NW-156 is used in alkyd...展开 Depol NW-156 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ester copolymer. This product performs well in regards to deaerating during the spraying, rolling, and brushing of coatings. Depol NW-156 is used in alkyd and lacquer fast air drying enamel systems, 2-component urethane and epoxy coatings, and PVC plastisol coatings. 收起 | |
| Depol NW-161 | Naewoi Korea Resins | Depol NW-161 is a defoaming and de-aerating additive for organic solvent systems. Its main component is a special polymer with polysiloxane copolymer. It displays superior compatibility and defoaming for organic solvent systems. Depol NW-161 is used in vi...展开 Depol NW-161 is a defoaming and de-aerating additive for organic solvent systems. Its main component is a special polymer with polysiloxane copolymer. It displays superior compatibility and defoaming for organic solvent systems. Depol NW-161 is used in vinyl, polyurethane, and epoxy ester coatings, NC lacquer, flooring and wood coatings, and polyester, general industrial systems. 收起 | |
| Depol NW-1640 | Naewoi Korea Resins | Depol NW-1640 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ester copolymer. This product has no influence on inter-adhesiveness in polymers and defoams well under low temperatures. Depol NW-1640 is used in solven...展开 Depol NW-1640 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ester copolymer. This product has no influence on inter-adhesiveness in polymers and defoams well under low temperatures. Depol NW-1640 is used in solvent and solvent-free epoxy coating systems, solvent and solvent-free urethane coating systems, and industrial baking systems. 收起 | |
| Depol NW-165 | Naewoi Korea Resins | Depol NW-165 is a defoaming and de-aerating additive for organic solvent systems. Its main component is a modified polysiloxane copolymer. It displays no gloss reduction of surface film. Depol NW-165 is used in wood coatings based on short oil alkyd, acry...展开 Depol NW-165 is a defoaming and de-aerating additive for organic solvent systems. Its main component is a modified polysiloxane copolymer. It displays no gloss reduction of surface film. Depol NW-165 is used in wood coatings based on short oil alkyd, acrylic lacquer, acrylic urethane coatings, chlorinated rubber, modified vinyl coatings, and medium and long oil enamel coatings. 收起 | |
| Depol NW-166H | Naewoi Korea Resins | Depol NW-166H is a defoaming and de-aerating additive. Its main component is a special high molecular compound. It displays deaerating properties during spraying, rolling and brushing coatings. Depol NW-166H is used in alkyd, melamine and NC lacquer coati...展开 Depol NW-166H is a defoaming and de-aerating additive. Its main component is a special high molecular compound. It displays deaerating properties during spraying, rolling and brushing coatings. Depol NW-166H is used in alkyd, melamine and NC lacquer coatings, 2-component urethane coatings, chlorinated rubber, epoxy coatings, and acrylic and alkyd air drying systems. 收起 | |
| Depol NW-172 | Naewoi Korea Resins | Depol NW-172 is a polymer type defoamer for solvent based systems. Its main component is a vinyl ether with a modified acryl copolymer. This product is effective for destroying micro-foam and shows acceptance and compatibility with coating resins. Depol N...展开 Depol NW-172 is a polymer type defoamer for solvent based systems. Its main component is a vinyl ether with a modified acryl copolymer. This product is effective for destroying micro-foam and shows acceptance and compatibility with coating resins. Depol NW-172 is used in unsaturated polyester and UV systems, PVC compounds, and 2-component epoxy coatings. 收起 | |
| Depol NW-192 | Naewoi Korea Resins | Depol NW-192 is a polymer type defoamer for solvent based systems. Its main component is a special high molecular compound. This product does not show haze in films it is added to, regardless of the amount added. Depol NW-192 is used in alkyd and lacquer ...展开 Depol NW-192 is a polymer type defoamer for solvent based systems. Its main component is a special high molecular compound. This product does not show haze in films it is added to, regardless of the amount added. Depol NW-192 is used in alkyd and lacquer fast air drying enamel systems, polyurethane and epoxy coatings, and chlorinated rubber and polyester high temperature baking systems. 收起 | |
| Depol NW-193 | Naewoi Korea Resins | Depol NW-193 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ether modified copolymer. This product does not show haze in films it is added to, regardless of the amount added. Depol NW-193 is used in alkyd and lacqu...展开 Depol NW-193 is a polymer type defoamer for solvent based systems. Its main component is a polyvinyl ether modified copolymer. This product does not show haze in films it is added to, regardless of the amount added. Depol NW-193 is used in alkyd and lacquer fast air drying enamel systems, polyurethane and epoxy coatings, and chlorinated rubber and polyester high temperature baking systems. 收起 | |
| Depol NW-195 | Naewoi Korea Resins | Depol NW-195 is a polymer type defoamer for solvent based systems. Its main component is a high molecular vinyl ether with an ester copolymer. This product shows no gloss reduction during defoaming and also shows no separation between the coating and the ...展开 Depol NW-195 is a polymer type defoamer for solvent based systems. Its main component is a high molecular vinyl ether with an ester copolymer. This product shows no gloss reduction during defoaming and also shows no separation between the coating and the additive during long storage. Depol NW-195 is used in 2-component solvent and solvent free based urethane coatings, 2-component solvent and solvent-free based epoxy coatings, polyester acrylic baking systems, and polyester urethane UV curing coatings. 收起 | |
| Depol NW-2000 | Naewoi Korea Resins | Depol NW-2000 is a polymer type defoamer for solvent based systems. Its main component is a high molecular vinyl ether with ester copolymer. This product shows no separation between coatings and additives during long storage and also shows no gloss reduct...展开 Depol NW-2000 is a polymer type defoamer for solvent based systems. Its main component is a high molecular vinyl ether with ester copolymer. This product shows no separation between coatings and additives during long storage and also shows no gloss reduction during defoaming. Depol NW-2000 is used in alkyd and lacquer fast air drying enamel systems, polyurethane and epoxy coatings, and chlorinated rubber and polyester high temperature baking systems. 收起 | |
| Depol NW-289W | Naewoi Korea Resins | Depol NW-289W is a silicone type defoamer for water based systems. Its main component is a special polymer with a modified polysiloxane. It prevents foam during the manufacturing of coatings and has no influence on gloss or long-time color stability. Depo...展开 Depol NW-289W is a silicone type defoamer for water based systems. Its main component is a special polymer with a modified polysiloxane. It prevents foam during the manufacturing of coatings and has no influence on gloss or long-time color stability. Depol NW-289W is used in acrylic emulsions, water dispersing polyurethane systems, styrene modified acrylic emulsion systems, and water soluble adhesives. 收起 | |
| Depol NW-293W | Naewoi Korea Resins | Depol NW-293W is a silicone type defoamer for water based systems. Its main component is a special polymer with a polysiloxane copolymer. It is used as with high concentration tints and prevents foam during dispersion and the manufacturing of coatings. De...展开 Depol NW-293W is a silicone type defoamer for water based systems. Its main component is a special polymer with a polysiloxane copolymer. It is used as with high concentration tints and prevents foam during dispersion and the manufacturing of coatings. Depol NW-293W is used in water based acrylic emulsion systems, aqueous industrial coatings, aqueous pigment concentrates, and aqueous architectural coatings. 收起 | |
| Depol NW-294W | Naewoi Korea Resins | Depol NW-294W is a mineral type defoamer for water based systems. Its main component is a special organic compound. This product is a defoaming additive that prevents bubble and foam during the manufacturing of coatings. Depol NW-294W is used in water bas...展开 Depol NW-294W is a mineral type defoamer for water based systems. Its main component is a special organic compound. This product is a defoaming additive that prevents bubble and foam during the manufacturing of coatings. Depol NW-294W is used in water based acrylic emulsion systems, emulsion manufacturing, and building protection : coatings based on styrene-acrylic emulsions. 收起 | |
| Depol NW-295W | Naewoi Korea Resins | Depol NW-295W is a mineral type defoamer for water based systems. Its main component is a mineral oil compound with polysiloxane. This product is a defoaming additive that prevents bubbles and foam during the manufacturing of coatings. Depol NW-295W is us...展开 Depol NW-295W is a mineral type defoamer for water based systems. Its main component is a mineral oil compound with polysiloxane. This product is a defoaming additive that prevents bubbles and foam during the manufacturing of coatings. Depol NW-295W is used in gloss and semi-gloss emulsion systems, water based acrylic emulsion systems, and exterior wall paints. 收起 | |
| Depol NW-3000 | Naewoi Korea Resins | Depol NW-3000 is a polymer type defoamer for solvent based systems. Its main component is a special organic compound. This product shows initial defoaming properties. Depol NW-3000 is used in PVC plastisol systems. | |
| Depol NW-830S | Naewoi Korea Resins | Depol NW-830S is a mineral type defoamer for water based systems. Its main component is an aliphatic hydrocarbon. This product is a defoaming additive that prevents bubbles and foam during the manufacturing of coatings. Depol NW-830S is used in general in...展开 Depol NW-830S is a mineral type defoamer for water based systems. Its main component is an aliphatic hydrocarbon. This product is a defoaming additive that prevents bubbles and foam during the manufacturing of coatings. Depol NW-830S is used in general industrial coating systems, automotive coating systems, and wood coating systems. 收起 | |
| DISPEX® AA 4030 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® AA 4030 is an effective polymeric dispersing agent based on acrylic acid ammonium salt. | |
| DISPEX® AA 4135 NA | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® AA 4135 is an effective polymeric dispersing agent based on acrylic acid sodium salt. | |
| DISPEX® AA 4140 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® AA 4140 is a derivative of a family of highly effective, low viscosity dispersing agents for water-borne coating systems. The product is especially suited for the dispersion of inorganic pigments. DISPEX® AA 4140 is a solution of a sodium salt of ...展开 DISPEX® AA 4140 is a derivative of a family of highly effective, low viscosity dispersing agents for water-borne coating systems. The product is especially suited for the dispersion of inorganic pigments. DISPEX® AA 4140 is a solution of a sodium salt of an acrylic polymer in water. This straw colored liquid is effective over a pH range 5-12 and up to temperatures in excess of 100°C. Compared with inorganic dispersing agents, e.g. polyphosphate products, the organic polymer based DISPEX® N40 provides improved storage stability of both the pigment dispersion and the formulated paint. There is little or no adverse reaction to high temperatures or pH changes. 收起 | |
| Dispex® AA S 760 | BASF Formulation Additives 巴斯夫配方助剂 | 水性颜料的分散剂，和聚乙烯丙烯酸，聚乙烯丙烯酸酯，苯乙烯丁二烯和它们的共聚物相容 | |
| Dispex® AA S040 | BASF Formulation Additives 巴斯夫配方助剂 | 用于水性颜填料、色浆及制陶业的润湿分散剂。 | |
| DISPEX® CX 4230 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® CX 4230 is a low VOC, low odor hydrophobic dispersant for interior and exterior architectural coatings. It is used to disperse titanium dioxide and extender pigments. It is added levels ranging from 1.05 to 3.0% based on pigment solids. | |
| Dispex® CX 4231 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® CX 4231 (以前的Ultradispers® AB 30)是一种羧酸共聚物的多铵盐。它具有显著的憎水性，可减少拖尾和吸水性 | |
| Dispex® CX 4234 | BASF Formulation Additives 巴斯夫配方助剂 | 用于内外墙建筑涂料的疏水性分散剂。 | |
| DISPEX® CX 4240 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® CX 4240 is a highly effective, low viscosity dispersing agent for water-borne coating systems. It is especially suited for the dispersion of inorganic pigments. This straw colored liquid is a solution of an ammonium salt of an acrylic copolymer in...展开 DISPEX® CX 4240 is a highly effective, low viscosity dispersing agent for water-borne coating systems. It is especially suited for the dispersion of inorganic pigments. This straw colored liquid is a solution of an ammonium salt of an acrylic copolymer in water. The copolymer is manufactured to a relatively narrow molecular weight distribution thus resulting in a consistent product quality with maximum effectiveness. The special copolymer backbone is designed for complete compatibility with polypropylene and hexylene glycols used in high proportions in water-borne high gloss coatings to promote wet edge time. 收起 | |
| DISPEX® CX 4320 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® CX 4320 is a particularly effective dispersing agent for dispersing inorganic fillers and pigments. It improves wet scrub and blocking resistance. It is a sodium salt of a carboxylic acid polymer in water and is particularly effective for dispersi...展开 DISPEX® CX 4320 is a particularly effective dispersing agent for dispersing inorganic fillers and pigments. It improves wet scrub and blocking resistance. It is a sodium salt of a carboxylic acid polymer in water and is particularly effective for dispersing inorganic fillers and pigments in high gloss, semi-gloss and highly filled interior paints. It also improves wet-scrub resistance, blocking resistance and has excellent ZnO-compatibility. 收起 | |
| DISPEX® CX 4340 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® CX 4340 is a highly effective, low viscosity dispersing agent for water-borne coating systems. It is especially suited for the dispersion of inorganic pigments. This straw colored liquid is a solution of a sodium salt of an acrylic copolymer in wa...展开 DISPEX® CX 4340 is a highly effective, low viscosity dispersing agent for water-borne coating systems. It is especially suited for the dispersion of inorganic pigments. This straw colored liquid is a solution of a sodium salt of an acrylic copolymer in water. The copolymer is manufactured to a relatively narrow molecular weight distribution thus resulting in a consistent product quality with maximum effectiveness. The special copolymer backbone is designed for complete compatibility with polypropylene and hexylene glycols used in high proportions in water-borne high gloss coatings to promote wet edge time. 收起 | |
| Dispex® CX 4345 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® CX 4345 (以前的Ultradispers® MD 21)是一种高效羧酸共聚物的多钠盐的水溶液。它的憎水性可大大改善其耐湿擦洗性 | |
| DISPEX® CX 4910 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® CX 4910 is a highly effective dispersing agent for systems, which are supplied as ‘dry systems’ and require addition of water for activation prior to their use. Typical applications examples are plasters, wall finishes, cement and tile adhesives. ...展开 DISPEX® CX 4910 is a highly effective dispersing agent for systems, which are supplied as ‘dry systems’ and require addition of water for activation prior to their use. Typical applications examples are plasters, wall finishes, cement and tile adhesives. DISPEX® CX 4910 is a sodium salt of an acrylic polymer. For the production of systems, traded as ‘dry systems’, DISPEX® CX 4910 is typically incorporated into the dry powder mix by a normal dry blending operation. Upon wetting of such a ‘dry system’ a waterbased paste/slurry is generated. DISPEX® CX 4910 is effective over a pH range 5-12 and up to temperatures in excess of 100°C. 收起 | |
| Dispex® Ultra FA 4401 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® Ultra FA 4401 (formerly Pluracoat® Dispersal DA 120) is a non-ionic surfactant with excellent pigment wetting and dispersing properties. It is compatible with other nonionic, anionic, and cationic surfactants. | |
| DISPEX® Ultra FA 4404 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4404 is a partially neutralized chelating agent suitable for use in the manufacture of pigment suspensions, emulsion paints, slurries, mainly inorganic pigments, viscosity reducer. It combines the properties of a chelating agent and polyp...展开 DISPEX® Ultra FA 4404 is a partially neutralized chelating agent suitable for use in the manufacture of pigment suspensions, emulsion paints, slurries, mainly inorganic pigments, viscosity reducer. It combines the properties of a chelating agent and polyphosphate with those of an organic dispersant thus yielding highly concentrated, stable and low-viscosity inorganic pigment suspensions, e. g. TiO2-slurries. 收起 | |
| DISPEX® Ultra FA 4416 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4416 is a wetting and dispersing agent for aqueous coatings with high gloss, color strength and excellent rub-out properties. It is designed for aqueous top coats based on various binder types’ e.g. polyester solutions, polyacrylics, PUR-...展开 DISPEX® Ultra FA 4416 is a wetting and dispersing agent for aqueous coatings with high gloss, color strength and excellent rub-out properties. It is designed for aqueous top coats based on various binder types’ e.g. polyester solutions, polyacrylics, PUR-emulsions. With its excellent wetting properties, DISPEX® Ultra FA 4416 when used with inorganic and organic pigments produces a high gloss and good color development in low and co-solvent free systems. DISPEX® Ultra FA 4416 prevents rub-out effects by using critical pigment combinations, e.g. titanium dioxide / phthalo blue. It is suitable for air and oven drying coatings as well as baking coatings. Since DISPEX® Ultra FA 4416 has no effect on pot-life it is also recommended for aqueous 2 pack PUR coatings. It allows the formulation of economical inorganic slurries and pigment concentrates for emulsion paints and consumer coatings. Here it combines the advantages of a low paste-viscosity with anti-settling characteristics and excellent compatibility to all types of aqueous base-paints. 收起 | |
| DISPEX® Ultra FA 4420 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4420 is a fatty acid modified polyester that stabilizes inorganic and organic pigments in water and solvents. It provides maximum color development, higher pigment loading and optimum color acceptance. This product is used for universal c...展开 DISPEX® Ultra FA 4420 is a fatty acid modified polyester that stabilizes inorganic and organic pigments in water and solvents. It provides maximum color development, higher pigment loading and optimum color acceptance. This product is used for universal colorants for decorative paints. When using universal colorants in decorative paints, the addition of DISPEX® Ultra FA 4420 to the base paints (water and solvent) can increase compatibility and color acceptance and prevents de-wetting of the colorants. DISPEX® Ultra FA 4420 is an activator for Bentonites as well as for associated and acrylic thickeners. 收起 | |
| DISPEX® Ultra FA 4425 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4425 stabilizes all kinds of pigments and extenders in water- and solvent-based systems, especially in decorative coatings. In addition it makes polar ingredients of universal colorants more compatible with non-polar solvent-based paints ...展开 DISPEX® Ultra FA 4425 stabilizes all kinds of pigments and extenders in water- and solvent-based systems, especially in decorative coatings. In addition it makes polar ingredients of universal colorants more compatible with non-polar solvent-based paints into which they may be incorporated. This results in: maximum color development of the colorant based on DISPEX® Ultra FA 4425, optimum color acceptance of universal colorants in base-paints, and higher pigment loading in colorants. DISPEX® Ultra FA 4425, used as a single wetting and dispersing agent, is considered suitable for VOC-free applications, particularly universal colorants. When using universal colorants in decorative paints, the addition of DISPEX® Ultra FA 4425 to the base paints (water and solvent) can increase compatibility and color acceptance, especially in water-based and ultra-low aromatic content decorative paints. 收起 | |
| Dispex® Ultra FA 4430 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® Ultra FA 4430 (以前的Lumiten® N-OC 30) 是一种非离子型表面活性剂，可用于改善乳胶漆的储存稳定性及其与水泥和石灰的相容性 | |
| DISPEX® Ultra FA 4431 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4431 is a wetting and dispersing agent for inorganic pigments and fillers in solventbased, solvent-free and water-based systems. It can be used in all solvent-based and solvent-free industrial and decorative coating systems. It is especia...展开 DISPEX® Ultra FA 4431 is a wetting and dispersing agent for inorganic pigments and fillers in solventbased, solvent-free and water-based systems. It can be used in all solvent-based and solvent-free industrial and decorative coating systems. It is especially suitable for wetting, dispersion and stabilization of inorganic pigments and fillers in solvent-free epoxy and polyurethane systems, like flooring or pipe-line coatings. DISPEX® Ultra FA 4431 can also be used to decrease the viscosity of water-based resin-free inorganic pigment concentrates, based on high molecular weight dispersing agents like DISPEX® Ultra PA 4550. In addition DISPEX® Ultra FA 4431 is suitable for dispersion and stabilization of inorganic pigments and fillers in water-based decorative paints based on acrylic emulsions, achieving a better rheology and improved gloss. 收起 | |
| DISPEX® Ultra FA 4437 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4437 is a silicone-free surface active flow additive and colour acceptance improver for aqueous systems based on emulsions and aqueous resins. Due to its good wetting properties DISPEX® Ultra FA 4437 ensures better wetting of difficult-to...展开 DISPEX® Ultra FA 4437 is a silicone-free surface active flow additive and colour acceptance improver for aqueous systems based on emulsions and aqueous resins. Due to its good wetting properties DISPEX® Ultra FA 4437 ensures better wetting of difficult-to-wet substrates. The emulsifying effect of this product also prevents surface defects such as craters, fisheyes, pinholes and streaks caused by incompatible components. Furthermore, DISPEX® Ultra FA 4437 has a strong affinity to pigment surfaces thereby reducing color acceptance problems. 收起 | |
| DISPEX® Ultra FA 4480 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4480 is a wetting a dispersing agent with excellent pigment wetting properties for coatings and aqueous pigment pastes. It shows excellent wetting and dispersing properties in aqueous, binder and solvent-free pigment pastes. DISPEX® Ultra...展开 DISPEX® Ultra FA 4480 is a wetting a dispersing agent with excellent pigment wetting properties for coatings and aqueous pigment pastes. It shows excellent wetting and dispersing properties in aqueous, binder and solvent-free pigment pastes. DISPEX® Ultra FA 4480 also provides outstanding flow properties even at high pigment load. In topcoats based on different binder types DISPEX® Ultra FA 4480 improves pigment wetting and therefore increases gloss and color intensity of the paint, especially in combination with organic pigments. This product also shows excellent results in waterbased alkyds, polyester resins as also in aqueous polyurethane emulsions. 收起 | |
| Dispex® Ultra FA 4483 | BASF Formulation Additives 巴斯夫配方助剂 | 无机颜料分散剂和乳胶制备的稳定表面活性剂 | |
| DISPEX® Ultra PA 4503 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PA 4503 is a dispersing resin with self-emulsifying properties. In combination with DISPEX® Ultra PA 4503, it is suitable for the production of VOC free pigment concentrates. The excellent compatibility of this combination with both water- a...展开 DISPEX® Ultra PA 4503 is a dispersing resin with self-emulsifying properties. In combination with DISPEX® Ultra PA 4503, it is suitable for the production of VOC free pigment concentrates. The excellent compatibility of this combination with both water- and solvent-based decorative paint systems means these concentrates are suitable for the production of tinting systems where only low shear forces (shaking machines) are used. The chemical character of DISPEX® Ultra PA 4503 makes it suitable for systems with a wide pH range (5–12). 收起 | |
| Dispex® Ultra PA 4516 | BASF Formulation Additives 巴斯夫配方助剂 | 开发作为颜料研磨树脂，用于水性油墨。可作为单一树脂组分用于颜料研磨基料，该基料随后可用作开稀阶段使用其他担体的水性油墨基底 | |
| DISPEX® Ultra PA 4550 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PA 4550 is a modified polyacrylate that stabilizes the pigment dispersion of inorganic and organic pigments and improves gloss, color strength, flocculation stability, and anti-flooding behavior. This product is used as a dispersing agent. D...展开 DISPEX® Ultra PA 4550 is a modified polyacrylate that stabilizes the pigment dispersion of inorganic and organic pigments and improves gloss, color strength, flocculation stability, and anti-flooding behavior. This product is used as a dispersing agent. DISPEX® Ultra PA 4550 is pH-independent and has a broad compatibility in most commonly used water-based coatings. It is completely water-soluble and does not need to be neutralized. 收起 | |
| DISPEX® Ultra PA 4560 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PA 4560 is a modified polyacrylate that is pH-independent and has a wide-spread compatibility in most commonly used waterborne decorative coatings. It provides improved gloss, color strength, flocculation stability and anti-flooding behavior...展开 DISPEX® Ultra PA 4560 is a modified polyacrylate that is pH-independent and has a wide-spread compatibility in most commonly used waterborne decorative coatings. It provides improved gloss, color strength, flocculation stability and anti-flooding behavior. DISPEX® Ultra PA 4560 is, in combination with DISPEX® Ultra PA 4503, suitable to formulate VOC-free tinting concentrates for both water- and solvent-based decorative paints. These concentrates have excellent compatibility and can therefore be incorporated by the use of low shear forces (shaking machines). 收起 | |
| Dispex® Ultra PA 4580 | BASF Formulation Additives 巴斯夫配方助剂 | 稳定有机颜料和无机颜料，在色浆中有强降黏效果，提高光泽，防止浮色和发花，提高颜料着色力，抗絮凝 | |
| Dispex® Ultra PA 4590 | BASF Formulation Additives 巴斯夫配方助剂 | 经济型高分子分散剂，用于各类水性工业涂料和颜料色浆中 | |
| DISPEX® Ultra PX 4275 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PX 4275 is a polymeric wetting and dispersing agent for high quality aqueous coatings and pigment pastes. It is suitable for air and oven dried coatings. Since DISPEX® Ultra PX 4275 has no effect on pot-life it is recommended for aqueous 2 p...展开 DISPEX® Ultra PX 4275 is a polymeric wetting and dispersing agent for high quality aqueous coatings and pigment pastes. It is suitable for air and oven dried coatings. Since DISPEX® Ultra PX 4275 has no effect on pot-life it is recommended for aqueous 2 pack PUR coating. This product has a low foaming tendency and to the best of our knowledge has no negative influence on the water and corrosion resistance. DISPEX® Ultra PX 4275 is used in combination with zinc oxid, an increase of viscosity may occur. 收起 | |
| DISPEX® Ultra PX 4575 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PX 4575 is a water-based dispersant made by Controlled Free Radical Polymerization (CFRP). This technology allows the synthesis of polymeric dispersants with highly defined polymer architecture and a low poly-dispersity index. DISPEX® Ultra ...展开 DISPEX® Ultra PX 4575 is a water-based dispersant made by Controlled Free Radical Polymerization (CFRP). This technology allows the synthesis of polymeric dispersants with highly defined polymer architecture and a low poly-dispersity index. DISPEX® Ultra PX 4575 is especially suited for the dispersion of pigments in waterborne coatings and colorants. 收起 | |
| DISPEX® Ultra PX 4585 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PX 4585 is a waterborne dispersant of the acrylate block copolymer family of products made by controlled free radical polymerization (CFRP). This technology allows formulating polymeric dispersants with defined polymer architecture and a low...展开 DISPEX® Ultra PX 4585 is a waterborne dispersant of the acrylate block copolymer family of products made by controlled free radical polymerization (CFRP). This technology allows formulating polymeric dispersants with defined polymer architecture and a low poly-dispersity index. DISPEX® Ultra PX 4585 is especially suited for the dispersion of pigments in water-based coatings. DISPEX® Ultra PX 4585 offers high efficiency in stabilizing pigments and demonstrates wide compatibility with many water-based resin systems. This makes DISPEX® Ultra PX 4585 ideally suited for the use of the concept of resin-free pigment concentrates (RFPC). 收起 | |
| Efka® 3650 N | BASF Formulation Additives 巴斯夫配方助剂 | Efka® 3650 N可降低有机涂料体系的表面张力。其良好的相容性使之可有效防缩孔并提供流平控制。它的物理状态为浅黄色液体。Efka® 3650 N尤其适合用于基于醇酸的烤瓷漆、丙烯酸或聚酯树脂、聚氨酯涂料，双组份环氧涂料和自干醇酸体系 | |
| EFKA® FA 4600 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4600 is an antisettling agent for non-aqueous paints. As a modern anti-settling agent, it acts via adsorption phenomena on the pigment surface and effectively prevents pigments from settling and forming hard, difficult-to-stir sediments even in l...展开 EFKA® FA 4600 is an antisettling agent for non-aqueous paints. As a modern anti-settling agent, it acts via adsorption phenomena on the pigment surface and effectively prevents pigments from settling and forming hard, difficult-to-stir sediments even in low-viscosity coatings such as, e.g., dipping paints and wash-primers. This is possible even in the presence of specific high density pigments based on lead, chrome, barium, iron and titanium. In addition, the uniform electrostatic charge imparted by EFKA® FA 4600 prevents re-agglomeration thereby counteracting any premature settling of the pigments. EFKA® FA 4600 is an easy to use liquid anti-settling agent, the particular advantage of which is that it is effective over a broad range of polarity. It can, therefore, be used in a nitrocellulose lacquer, the solvents of which are mainly polar, as well as in decorative paints which only contain white spirit, i.e., a non-polar solvent. EFKA® FA 4600 is also an excellent anti-settling agent for low-viscosity printing inks, e.g., flexographic and gravure. In particular it counteracts the tendency of inorganic pigments to settle. 收起 | |
| EFKA® FA 4601 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4601 is an anti-settling agent for non-aqueous paint systems. It has been used with great success for years in the paint industry as a special agent for preventing sedimentation. EFKA® FA 4601 was developed as a result of detailed studies regardi...展开 EFKA® FA 4601 is an anti-settling agent for non-aqueous paint systems. It has been used with great success for years in the paint industry as a special agent for preventing sedimentation. EFKA® FA 4601 was developed as a result of detailed studies regarding interfacial activity. The mode of action of EFKA® FA 4601 systems results from the high surface activity of its constituents with almost all pigments. If processed properly, the individual pigment particles are coated with a monomolecular layer of adsorbed compounds which prevent agglomeration into larger particles, with the result that the fine particles remain in suspension and no caking occurs. This viscous liquid is a blend of selected fatty alcohol sulfates. EFKA® FA 4601 does not contain any alkali ions, and it is effective in most paints, provided they are not distinctly polar in their composition. 收起 | |
| Efka® FA 4610 | BASF Formulation Additives 巴斯夫配方助剂 | 阴离子型分散剂，特为钛白粉分散开发，也可用于其他的填料和无机颜料中，适用于汽车漆，工业漆，卷钢涂料和酸固化 | |
| Efka® FA 4612 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® FA 4612 (以前的 Efka® 5210)可帮助润湿和分散填料（CaCO3和AI (OH) 3），含不饱和聚酯树脂或结合聚苯乙烯，聚醋酸乙烯和苯乙烯-丁二烯共聚物。它可使填料易于添加，减少分散时间。它也可降低和稳定浆体粘度，从而改善流平，增加填料含量，并提高防火性能。Efka® FA 4612设计用于含填料的SMC和BMC共混物。它也适合用于含填料的胶衣涂料 | |
| Efka® FA 4615 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® FA 4615 (以前的Efka® 5215是一种有效地润湿和分散助剂，适用于无机填料。它可改善润湿性，使填料易于添加，降低浆体/混合物的粘度，增加填料含量。Efka® FA 4615适用于含填料的不饱和聚酯体系（SMC、BMC共混物、胶衣涂料和腻子）或结合聚苯乙烯、聚醋酸乙烯和苯乙烯-丁二烯共聚物。 | |
| EFKA® FA 4620 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4620 helps to wet and disperse solid particles (e.g. CaCO3, ATH) in unsaturated polyester resin systems. This results in improved wetting and incorporation of fillers and extenders, reduced viscosity of the paste/compound, and increased filler an...展开 EFKA® FA 4620 helps to wet and disperse solid particles (e.g. CaCO3, ATH) in unsaturated polyester resin systems. This results in improved wetting and incorporation of fillers and extenders, reduced viscosity of the paste/compound, and increased filler and extender loading. EFKA® FA 4620 is suited for filled unsaturated polyester systems (e.g. SMC/BMC, gel coats, car putties) or combinations with polystyrene, polyvinylacetate and styrene-butadiene copolymers (e.g. LS- or LP formulations). 收起 | |
| EFKA® FA 4642 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4642 is an additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This product is compatible with all solvent or solvent-free coating systems. The pot-life of two-pack systems is not aff...展开 EFKA® FA 4642 is an additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This product is compatible with all solvent or solvent-free coating systems. The pot-life of two-pack systems is not affected. In the dispersion of organically treated Bentonites, the use of EFKA® FA 4642 shortens dispersion time, provides easier handling of the Bentonite gel, and improves storage stability. 收起 | |
| EFKA® FA 4644 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4644 is a transparent, yellowish liquid additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This means reduced dispersion time, stabilization of the pigment dispersion, decreased pigm...展开 EFKA® FA 4644 is a transparent, yellowish liquid additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This means reduced dispersion time, stabilization of the pigment dispersion, decreased pigment sedimentation, and increased gloss and improved flow. EFKA® FA 4644 is compatible with all solvent or solvent-free coating systems. The pot-life of two-pack systems is not affected. 收起 | |
| EFKA® FA 4654 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4654 helps to prevent interfacial tension between the hydrophilic pigments/extenders and binder, forming a lattice structure with the pigments at the same time. This means: reduced dispersion time, stabilization of the pigment dispersion, reduced...展开 EFKA® FA 4654 helps to prevent interfacial tension between the hydrophilic pigments/extenders and binder, forming a lattice structure with the pigments at the same time. This means: reduced dispersion time, stabilization of the pigment dispersion, reduced pigment sedimentation, reduced tendency to sag during application on vertical surfaces, and prevention of flooding. It is a high molecular weight carboxylic acid salts. EFKA® FA 4654 is ideal for dispersing organophilic bentonites, because it reduces dispersion time, improves the storage properties of the final paste and gives a thixotropic, easily processed paste product. It is especially suitable for non- to medium-polar binder systems, ie. air-dried alkyd resins, chlorinated polymers, alkyd/amino resin combinations and epoxies. EFKA® FA 4654 can cause discoloration in nitrocellulose varnishes. 收起 | |
| Efka® FA 4654 EM | BASF Formulation Additives 巴斯夫配方助剂 | 用于中性和非极性涂料的分散、防沉、防浮色和发花助剂，兼作有机膨润土的凝胶化助剂。 | |
| EFKA® FA 4663 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4663 is a dispersant and grinding aid, anti-settling and anti-floating agent for coatings, paints, printing inks, and other similar surface coatings. It is also a gelling aid for organically modified bentonite. This product is a 50% solution of a...展开 EFKA® FA 4663 is a dispersant and grinding aid, anti-settling and anti-floating agent for coatings, paints, printing inks, and other similar surface coatings. It is also a gelling aid for organically modified bentonite. This product is a 50% solution of an electroneutral salt of a polycarboxylic acid with amine derivatives dissolved in higher aromatics. EFKA® FA 4663 is an almost universally applicable additive for nonaqueous coatings. It has proved its value in particular in systems based on alkyd resins, alkyd/melamine resins, acrylic and epoxy resins,chlorinated rubber, linseed oil/stand oil, etc. If some linear binders which contain hydroxyl groups (e.g. Desmophen® types from Bayer)are used with our product, thixotropy can occur. 收起 | |
| EFKA® FA 4665 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4665 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binder. It is a high-molecular weight unsaturated carboxylic acid, combined with a very compatible organically modified polysiloxane. This transparent, s...展开 EFKA® FA 4665 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binder. It is a high-molecular weight unsaturated carboxylic acid, combined with a very compatible organically modified polysiloxane. This transparent, slightly brownish liquid is especially suitable for medium to high-polarity binder systems, for example: alkyd/amino resin combinations, nitro-cellulose systems, polyurethane- and chlorinated polymer systems, acrylic polyisocyanate systems (2-pack acrylics), and chlorinated polymers. EFKA® FA 4665 is not compatible with white spirit or paints which are diluted with white spirit. 收起 | |
| EFKA® FA 4666 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4666 is a high molecular weight unsaturated carboxylic acid that prevents interfacial tension between the hydrophilic pigments and the binder. This wetting and dispersing additive reduces dispersion time and pigment sedimentation, prevents floodi...展开 EFKA® FA 4666 is a high molecular weight unsaturated carboxylic acid that prevents interfacial tension between the hydrophilic pigments and the binder. This wetting and dispersing additive reduces dispersion time and pigment sedimentation, prevents flooding/floating and stabilizes pigment dispersion. EFKA® FA 4666 is especially suited for medium to high-polarity binder systems, for example: alkyd/amino resin combinations, nitro-cellulose systems, polyurethane systems, acrylic polyisocyanate systems (2-pack acrylics) and chlorinated polymers. 收起 | |
| Efka® FA 4670 | BASF Formulation Additives 巴斯夫配方助剂 | 高分子两不饱和羧酸，降低亲水颜料或填料和载体间的界面张力，减少分散时间，稳定颜料分散，减少颜料沉淀，防止浮色和发花 | |
| EFKA® FA 4671 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4671 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binders. This results in reduced dispersion time, stabilization of the pigment dispersion, decreased flooding of pigments, and prevention of hard sedimen...展开 EFKA® FA 4671 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binders. This results in reduced dispersion time, stabilization of the pigment dispersion, decreased flooding of pigments, and prevention of hard sedimentation. This product is an alkylol ammonium salt of a high-molecular weight carboxylic acid. EFKA® FA 4671 is suitable for use in low or high-polarity solvent systems as well as water-based coatings. It is used to reduce flooding and settling in non-polar systems e.g. air drying alkyd paints. It is an effective anti-settling agent in wash and shop primers. It improves the color acceptance of tinting bases in white latex paints, resulting in higher pigment efficiency. 收起 | |
| Efka® FA 4672 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® FA 4672 (之前的Texaphor® SF 71)是一种润湿和分散助剂，用于反应性树脂。该无色到浅黄色液体是一种离子和非离子酯的混合物。它的降粘特性使之可专门用于高固含和全固含体系。Efka® FA 4672确保填料可被快速并优化的分散。降粘作用使填料更易混合，可获取更高的填料含量。Efka® FA 4672与各种基料类型相容，因此可用于双组份PUR、双组份EP和不饱和聚酯树脂 | |
| Efka® FA 4673 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® FA 4673 (以前的Texaphor® 873 Conc)是一种分散助剂，用于主要含无机颜料和有机媒介的颜料色浆，用于塑料、涂料和印刷油墨的着色 | |
| Efka® FL 3670 | BASF Formulation Additives 巴斯夫配方助剂 | IRGAFLOW 110是一种改性聚（丙烯酸酯）流平剂，具有优化的性能。它与大多数溶剂型树脂具有良好的整体相容性，是一种非常有效的抗缩孔和流平控制剂，不会造成泡沫稳定，比IRGAFLOW 100具有更高的流平效率 | |
| EFKA® FL 3740 EH | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FL 3740 is a levelling agent with air release properties for nonaqueous, liquid coating systems, as well as for powder coatings and binders for powder coatings. Due to its chemical structure, EFKA® FL 3740 modifies the surface tension of the coating...展开 EFKA® FL 3740 is a levelling agent with air release properties for nonaqueous, liquid coating systems, as well as for powder coatings and binders for powder coatings. Due to its chemical structure, EFKA® FL 3740 modifies the surface tension of the coatings. It also eliminates or reduces cratering, fish-eyes and orange peel; improves the flow, dispersion and floating behaviour, prevents air entrapment and optimizes wetting of the substrate. EFKA® FL 3740 is also ideally suited to be used in the manufacture of powder coatings or binders for powder coatings. For the preparation of a master batch, it is recommended to use a mixing of 9 parts of polyester resin with 1 part EFKA® FL 3740. This mixture is perfectly suited for direct application in the premix and extrusion process after melting, homogenization, cooling and granulation. The drawbacks of leveling agents applied on SiO2 are avoided. In particular, pigmented and transparent powder coatings with excellent levelling properties are obtained for the production of weatherproof powder coatings. 收起 | |
| Efka® FL 3741 | BASF Formulation Additives 巴斯夫配方助剂 | 无硅无溶剂的流平剂，可用于不同反应性树脂体系的脱气 | |
| EFKA® FL 3745 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FL 3745 is a silicone-free levelling agent with air release properties for powder coatings. It can be used in liquid non-aqueous coatings as well as in powder coating. Due to its chemical structure EFKA® FL 3745 modifies the surface tension of powde...展开 EFKA® FL 3745 is a silicone-free levelling agent with air release properties for powder coatings. It can be used in liquid non-aqueous coatings as well as in powder coating. Due to its chemical structure EFKA® FL 3745 modifies the surface tension of powder coatings. By formulating with this product, smooth trouble-free film surfaces will be obtained, generally with an improvement in gloss. This copolyacrylate is a clear, colorless liquid. 收起 | |
| Efka® FL 3770 | BASF Formulation Additives 巴斯夫配方助剂 | IRGAFLOW 100是一种改性聚（丙烯酸酯）流平剂，具有优化的性能。它与大多数溶剂型树脂具有良好的整体相容性，是一种非常有效的抗缩孔和流平控制剂，不会造成泡沫稳定 | |
| EFKA® FL 3778 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FL 3778 is an acrylic copolymer that improves leveling, prevents cratering, helps substrate wetting and does not interfere with intercoat adhesion. It is used for coil coatings, polyurethane coatings, stoving enamels, two-pack epoxy compounds and ai...展开 EFKA® FL 3778 is an acrylic copolymer that improves leveling, prevents cratering, helps substrate wetting and does not interfere with intercoat adhesion. It is used for coil coatings, polyurethane coatings, stoving enamels, two-pack epoxy compounds and air-drying alkyd systems. 收起 | |
| EFKA® FL 3785 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FL 3785 is a modified polyacylate leveling agent for solvent-based systems without fluor or silicon modifications. It improves leveling, prevents cratering, significantly improves de-aeration and does not interfere with intercoat adhesion. EFKA® FL ...展开 EFKA® FL 3785 is a modified polyacylate leveling agent for solvent-based systems without fluor or silicon modifications. It improves leveling, prevents cratering, significantly improves de-aeration and does not interfere with intercoat adhesion. EFKA® FL 3785 is especially suitable for coil coatings, two-pack epoxy or polyurethane coatings, baking enamels and gelcoats. For enhanced performance in coil and two-pack coatings, EFKA® FL 3785 can be combined with EFKA® FL 3600. Compared to fluorocarbon-modified acrylates or silicone leveling additives, EFKA® FL 3785 has less influence on surface tension and more effect on de-aeration. 收起 | |
| Efka® FL 3930 | BASF Formulation Additives 巴斯夫配方助剂 | 用于粉末涂料的粉末状无硅流平剂 | |
| Efka® MI 6779 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® MI 6779 (formerly Texaquart® 879 N) is a cationic additive to increase the electric conductivity of industrial coatings. Due to its strong polar character Efka® MI 6779 increases the electric conductivity or, in other words, decreases the electric r...展开 Efka® MI 6779 (formerly Texaquart® 879 N) is a cationic additive to increase the electric conductivity of industrial coatings. Due to its strong polar character Efka® MI 6779 increases the electric conductivity or, in other words, decreases the electric resistance of a liquid or solid paint film. The product being highly surface active encourages dispersion of the paint into fine droplets whilst being electrostatically sprayed. 收起 | |
| Efka® PA 4101 | BASF Formulation Additives 巴斯夫配方助剂 | 用于生产微脂色母浆的分散树脂，表现出良好的润湿性和稳定性，与常用的树脂相容性极佳，能与胺基树脂或聚异氰酸酯交联 | |
| EFKA® PA 4400 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PA 4400 is a modified polyurethane for stabilizing inorganic and organic pigments with strong viscosity depressing properties. It improves gloss, reductions of flooding problems, higher color strength and lower viscosity. This product is used in all...展开 EFKA® PA 4400 is a modified polyurethane for stabilizing inorganic and organic pigments with strong viscosity depressing properties. It improves gloss, reductions of flooding problems, higher color strength and lower viscosity. This product is used in all kinds of solvent borne coatings. EFKA® PA 4400 is an acrylic polymer with significant higher molecular weight compared with the EFKA® polyurethane-based polymeric dispersants. This gives better deflocculation of organic pigments. 收起 | |
| EFKA® PA 4401 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PA 4401 is a modified polyurethane for stabilizing inorganic and organic pigments with strong viscosity depressing properties. It improves gloss, reductions of flooding problems and higher color strength. This product is broadly compatible – from lo...展开 EFKA® PA 4401 is a modified polyurethane for stabilizing inorganic and organic pigments with strong viscosity depressing properties. It improves gloss, reductions of flooding problems and higher color strength. This product is broadly compatible – from low- to high-polarity systems, including nitrocellulose. Care should be taken with EFKA® PA 4401 because of its tendency to yellowing and gelling when combined with chlorinated polymers. It also has a tendency to yellowing when combined with solvent-free epoxies. EFKA® PA 4401 is used for all kinds of high-quality solvent-based industrial coatings including automotive topcoats as well as pigment concentrates. 收起 | |
| Efka® PA 4414 | BASF Formulation Additives 巴斯夫配方助剂 | 聚合物分散剂，可提高有机颜料分散性，从而提高着色强度，降低粘度和增加光泽。可增强颜料基在碾磨中的加工性，允许更高的颜料使用量。它能提高成品油墨的展色性和流变性能 |
