UL Prospector

成功!

成功保存搜索结果
Request Sample ADDITOL® ITX Allnex - Powder Coating Resins 粉末涂料树脂 ADDITOL® ITX is used as a radical photoinitiator in UV inks and coatings. In combination with amine co-initiators or alpha cleavage photoinitiators, ADDITOL ITX is used in formulations containing unsaturated materials such as acrylates, methacrylates, vin...展开 ADDITOL® ITX is used as a radical photoinitiator in UV inks and coatings. In combination with amine co-initiators or alpha cleavage photoinitiators, ADDITOL ITX is used in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturated polyesters. With exposure to UV light, ADDITOL ITX undergoes a photochemical reaction that generates radicals. These radicals will initiate polymerization through the unsaturated groups present in the system. ADDITOL ITX is particularly suited to the curing of inks and pigmented coatings. In combinations with tertiary amine co-initiators such as EBECRYL® P104, EBECRYL P115, EBECRYL 7100 or MDEA, ADDITOL ITX provides good through cure along with surface cure. ADDITOL ITX is also effective as a sensitizer for alpha cleavage photoinitiators such as ADDITOL DMMTA. 收起
Request Sample ADDITOL® P 791 Allnex - Powder Coating Resins 粉末涂料树脂 固体脂肪族聚酸酐固化剂,结合含缩水甘油基的固体丙烯酸树脂制备粉末涂料。基料比例与所采用缩水甘油基树脂的当量有关。适合丙烯酸应用
Request Sample ADDITOL® P 824 Allnex - Powder Coating Resins 粉末涂料树脂 流平促进母料,用于粉末涂料。在户外耐候羟基聚酯基体中含有15%的活性剂。用于要求光泽和流平的应用场合
Request Sample ADDITOL® P 890 Allnex - Powder Coating Resins 粉末涂料树脂 流平促进剂母料,适用于室内室外用透明粉末涂料。在羟基聚酯载体上含约10%的活性组分。在粉末涂料配方中的建议添加量为7-8%
Request Sample ADDITOL® P 891 Allnex - Powder Coating Resins 粉末涂料树脂 ADDITOL® P 891 is a flow promoter masterbatch suitable for use in clear powder coatings. ADDITOL® P 891 contains approximately 5% active substance in an outdoor resistant carboxylated polyester matrix.The addition of 7-10% on binder is suggested for the m...展开 ADDITOL® P 891 is a flow promoter masterbatch suitable for use in clear powder coatings. ADDITOL® P 891 contains approximately 5% active substance in an outdoor resistant carboxylated polyester matrix.The addition of 7-10% on binder is suggested for the manufacture of haze-free clear coatings with very good flow. 收起
Request Sample ADDITOL® P 896 Allnex - Powder Coating Resins 粉末涂料树脂 流平促进母料,适用于有色粉末涂料。
Request Sample ADDITOL® P 920 Allnex - Powder Coating Resins 粉末涂料树脂 催化剂母料,设计用于制造皱纹效果。在羟基聚酯基体中含有5%的活性物质。适合需要皱纹表面效果的应用
Request Sample ADDITOL® P 932 Allnex - Powder Coating Resins 粉末涂料树脂 ADDITOL® P 932 is an aliphatic urethane pre-polymer crosslinking agent for use with hydroxyl terminated polyester resins for the manufacture of polyurethane powder coatings.
Request Sample ADDITOL® P 950 Allnex - Powder Coating Resins 粉末涂料树脂 具有摩擦带电活性的母料,用于混合型,TGIC型,聚氨酯型和TGIC替换体系。户内户外均可使用
Request Sample ADDITOL® P 964 Allnex - Powder Coating Resins 粉末涂料树脂 催化剂母料,设计用于混合型、TGIC或Araldite PT-910体系
Request Sample ADDITOL® P 965 Allnex - Powder Coating Resins 粉末涂料树脂 一种芳香族氨基甲酸酯加合物,用作羟基聚酯树脂交联剂,用于制备聚氨酯粉末涂料
Request Sample ADDITOL® P 966 Allnex - Powder Coating Resins 粉末涂料树脂 ADDITOL® P 966 is a catalyst masterbatch for use in TGIC or ARALDITE® PT-910 systems. This resin contains 5% active ingredient in a superdurable polyester resin matrix. ADDITOL® P 966 is easily handled and greatly improves dispersion of the catalyst in po...展开 ADDITOL® P 966 is a catalyst masterbatch for use in TGIC or ARALDITE® PT-910 systems. This resin contains 5% active ingredient in a superdurable polyester resin matrix. ADDITOL® P 966 is easily handled and greatly improves dispersion of the catalyst in powder coating formulations when mixed with superdurable resins. This material can also be used with CRYLCOAT® 4420-0 and CRYLCOAT® 4430-0 at varying levels in dry-blend systems to achieve adjustable low gloss values. 收起
Request Sample ADDITOL® PBZ Allnex - Powder Coating Resins 粉末涂料树脂 ADDITOL® PBZ is a radical photoinitiator exhibiting very good surface cure. It can be used alone or in combination with other photoinitiators in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturared polyest...展开 ADDITOL® PBZ is a radical photoinitiator exhibiting very good surface cure. It can be used alone or in combination with other photoinitiators in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturared polyesters. With exposure to UV light, ADDITOL® PBZ undergoes a photochemical reaction that generates radicals. 收起
AEPD™ VOX 1000 Multifunctional Neutralizer Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 AEPD™ VOX 1000中和胺能帮助您调配出零VOC(< 5克/升)的涂料,并不影响涂料本身的品质。它能够实现行业标杆产品AMP的全部功能,而且几乎没有任何气味。同时,和其他低VOC氨基醇相比,AEPD™ VOX 1000更为高效。 研磨时添加AEPD™ VOX 1000中和胺能够提高研磨分散的效率并降低分散剂的使用量。它的高沸点和低汽压使它特别适合于低VOC或零VOC涂料的调配,并且几乎完全去除胺类和氨气的气味。 推荐您在研磨和中和碱溶胀型增稠剂的调漆阶段使用本产品。
Request Sample ALCON 131 S/B FOAM Allnex - Powder Coating Resins 粉末涂料树脂 ALCON 131 S/B FOAM is a hydroxyl containing, high viscosity saturated polyester resin. ALCON 131 S/B FOAM is normally mixed with isocyanates to create foams that are suitable for fabrication of surfboard blanks.
ALKATERGE®-E Nonvolatile Surface Active Agent Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 ALKATERGE ® -E为不挥发性表面活性剂,极易溶解于大多数有机液体,但只有极微溶于水。即使如此, ALKATERGE ® -E在水中的浓度为0.001% (重量) 时也会降低其表面张力至约40达因每厘米。虽然它不降低矿物油的表面张力, 在矿物油中存在0.1%即可降低其对水的界面张力。 ALKATERGE ® -E会与无机酸反应生产盐,其中一些是水溶性的,并产生稳定的泡沫。无机酸或更初级的单碱有机酸的盐,是非常有效的润湿剂。在水性体系中这类盐可将恶唑啉环逐渐水解成酰胺结构。它生成油溶性...展开 ALKATERGE ® -E为不挥发性表面活性剂,极易溶解于大多数有机液体,但只有极微溶于水。即使如此, ALKATERGE ® -E在水中的浓度为0.001% (重量) 时也会降低其表面张力至约40达因每厘米。虽然它不降低矿物油的表面张力, 在矿物油中存在0.1%即可降低其对水的界面张力。 ALKATERGE ® -E会与无机酸反应生产盐,其中一些是水溶性的,并产生稳定的泡沫。无机酸或更初级的单碱有机酸的盐,是非常有效的润湿剂。在水性体系中这类盐可将恶唑啉环逐渐水解成酰胺结构。它生成油溶性皂与高级脂肪酸。这些盐和肥皂的润湿能力,经常可通过添加醇或二醇来增加。 ALKATERGE ® -E的盐溶液可以用作纸和纺织工业的渗透剂,并且在金属清洁剂配方中使用。 收起
ALKATERGE®-T Surface Active Agent Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 ALKATERGE®-T表面活性剂仅微溶于水。在普通室温下,ALKATERGE®-T是一种蜡状固体,它在芳香族烃类和低级醇或酮中高度可溶,可中等程度溶于脂肪族烃,并与大多数植物油混溶。在液体状态,它与几乎所有的有机液体混溶。本产品作为表面活性剂是有用的,由事实证明,即在矿物油中0.1%即可降低对水界面的表面张力约95%,或至小于2达因/厘米。 ALKATERGE®-T已用作腐蚀抑制剂,乳化剂和分散剂用于各种应用中。当适当加入到配方中时,它通常可以同时执行所有这些功能,以及其它对特定体系的针对...展开 ALKATERGE®-T表面活性剂仅微溶于水。在普通室温下,ALKATERGE®-T是一种蜡状固体,它在芳香族烃类和低级醇或酮中高度可溶,可中等程度溶于脂肪族烃,并与大多数植物油混溶。在液体状态,它与几乎所有的有机液体混溶。本产品作为表面活性剂是有用的,由事实证明,即在矿物油中0.1%即可降低对水界面的表面张力约95%,或至小于2达因/厘米。 ALKATERGE®-T已用作腐蚀抑制剂,乳化剂和分散剂用于各种应用中。当适当加入到配方中时,它通常可以同时执行所有这些功能,以及其它对特定体系的针对性功能 收起
AMP™-75 Multifunctional Neutralizer Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 AMP™-75多功能中和剂被广泛认为是一种多功能添加剂,适用于所有类型的乳胶漆。在配方中,AMP™可以作为一个功能强大的助分散剂,以防止颜料的再聚集。同时,这对涂层的整体性能有显著好处。 为了充分利用AMP™作为助分散剂,高达30%的现有分散剂固体可由AMP™等重量代替。通常的添加量,AMP对配方总重量为0.05〜0.1%。典型的配方需要0.1〜0.3%的AMP™(总配方量)以获取最佳的pH稳定性,用于缔合增稠剂中和,消除罐内腐蚀。对于闪锈的控制,需要额外的0.1〜0.2%的AMP™(总配...展开 AMP™-75多功能中和剂被广泛认为是一种多功能添加剂,适用于所有类型的乳胶漆。在配方中,AMP™可以作为一个功能强大的助分散剂,以防止颜料的再聚集。同时,这对涂层的整体性能有显著好处。 为了充分利用AMP™作为助分散剂,高达30%的现有分散剂固体可由AMP™等重量代替。通常的添加量,AMP对配方总重量为0.05〜0.1%。典型的配方需要0.1〜0.3%的AMP™(总配方量)以获取最佳的pH稳定性,用于缔合增稠剂中和,消除罐内腐蚀。对于闪锈的控制,需要额外的0.1〜0.2%的AMP™(总配方量)。 收起
AMP™-90 Multifunctional Neutralizer Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 AMP™-90多功能中和剂氨基醇是一种无色,流动的液体,具有多种用途,可用于金属加工液,油漆和涂料,锅炉水系统和个人护理产品中。它可作为胺用于树脂中和,作为助分散剂,甲醛清除剂,腐蚀抑制剂和作为原料进行合成。
AMP™-95 Multifunctional Neutralizer Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 AMP™-95 多功能中和剂是乳胶漆行业的旗舰标杆性产品。作为一款多功能胺类,AMP与其他胺相比,更能提高涂料的品质并增强涂料的性能。 AMP-95以其中和性能和多功能表现得到了全世界配方设计师的广泛信任。它可以作为一种共分散剂并为配方提供出色的涂膜性能。AMP-95带来的主要益处包括改进的pH稳定性,优异的耐擦洗性,理想的固色性能,以及更好的光泽和遮盖力。 同时,AMP共分散剂和中和胺能够减少抗冻融剂、开罐时间延长剂和分散剂的使用,从而减少涂料中所含的有机挥发物。
Request Sample AQU SAN GLACIER WHITE GELCOAT (S) Allnex - Powder Coating Resins 粉末涂料树脂 AQUAGUARD® Sanitaryware Glacier White is a specially developed high performance gelcoat for sanitaryware applications.
Request Sample AQUAGUARD IVORY SAND CULTURED GELCOAT Allnex - Powder Coating Resins 粉末涂料树脂 AQUAGUARD® CULTURED GELCOATS are a range of high performance stone like finish decorative Gelcoats. These highly durable Gelcoats exhibit outstanding UV, weathering and chemical resistance properties.
Request Sample AQUAGUARD™ CRYSTAL SILVER BLUE SHIMMER Allnex - Powder Coating Resins 粉末涂料树脂 AQUAGUARD® SHIMMER GELCOATS are high performance cosmetic finishes for the production of FRP composite materials intended for service in demanding indoor and outdoor applications.
Request Sample AQUAGUARD™ MIDNIGHT SHIMMER GELCOAT Allnex - Powder Coating Resins 粉末涂料树脂 AQUAGUARD® SHIMMER GELCOATS are high performance cosmetic finishes for the production of FRP composite materials intended for service in demanding indoor and outdoor applications.
Request Sample AQUAGUARD™ ORBIT BLUE SHIMMER SPRAY GELCOAT Allnex - Powder Coating Resins 粉末涂料树脂 AQUAGUARD® SHIMMER GELCOATS are high performance cosmetic finishes for the production of FRP composite materials intended for service in demanding indoor and outdoor applications.
Request Sample AQUAGUARD™ PLATINUM SHIMMER (S) Allnex - Powder Coating Resins 粉末涂料树脂 AQUAGUARD® SHIMMER GELCOATS are high performance cosmetic finishes for the production of FRP composite materials intended for service in demanding indoor and outdoor applications.
Request Sample AQUAGUARD™ SANDSTONE SHIMMER GELCOAT Allnex - Powder Coating Resins 粉末涂料树脂 AQUAGUARD® SHIMMER GELCOATS are high performance cosmetic finishes for the production of FRP composite materials intended for service in demanding indoor and outdoor applications.
Request Sample AQUAGUARD™ SHEETING GELCOAT BASE RESIN Allnex - Powder Coating Resins 粉末涂料树脂 AQUAGUARD®SHEETING GELCOAT BASE RESIN is a medium reactivity rigid, Neopentyl Glycol (NPG) modified, unsaturated polyester resin. Aquaguard Sheeting Gelcoat Base Resin is non-thixotropic, non-promoted and wax-free and is suitable for use in polyester gelc...展开 AQUAGUARD®SHEETING GELCOAT BASE RESIN is a medium reactivity rigid, Neopentyl Glycol (NPG) modified, unsaturated polyester resin. Aquaguard Sheeting Gelcoat Base Resin is non-thixotropic, non-promoted and wax-free and is suitable for use in polyester gelcoat formulations. 收起
Request Sample AQUAPOL™ 370S Allnex - Powder Coating Resins 粉末涂料树脂 AQUAPOL™ 370S is a high solids styrene acrylic for 2 pack cementitious based water proofing membranes and coatings, both internal and exterior applications.
Request Sample BECKOPOX® EH 694 Allnex - Powder Coating Resins 粉末涂料树脂 BECKOPOX® EH 694是一种酸酐固化剂,可结合固体环氧树脂,OH-官能团聚酯或作为环氧/聚酯混合体系附加的交联剂,用于制备粉末涂料。基于BECKOPOX® EH 694的配方具有良好的耐化学品和耐过烘烤性能。
Request Sample BECKOTHANE M21/40X Allnex - Powder Coating Resins 粉末涂料树脂 BECKOTHANE™ M21/40X is an aromatic moisture-curing polyurethane, which cures to give extremely tough and hardwearing films with excellent flexibility, abrasion-resistance, chemical-resistance and gloss.
Request Sample CRYLCOAT® 1501-6 Allnex - Powder Coating Resins 粉末涂料树脂 高反应活性羧基聚酯树脂,可用于制备50/50混合型粉末涂料。该树脂设计用于与低粘度环氧树脂一起使用,适合用于制备低温至130°C固化的MDF基材用涂料。基于该产品的涂料兼具良好的流平性、高光泽和耐化学品性能
Request Sample CRYLCOAT® 1506-0 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 1506-0 is a highly reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. Formulations based on CRYLCOAT® 1506-0 exhibit good overbake and solvent resistance, good mechanical properties and very good flo...展开 CRYLCOAT® 1506-0 is a highly reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. Formulations based on CRYLCOAT® 1506-0 exhibit good overbake and solvent resistance, good mechanical properties and very good flow. 收起
Request Sample CRYLCOAT® 1506-6 Allnex - Powder Coating Resins 粉末涂料树脂 高反应活性羧基聚酯树脂,以50/50制备混合型粉末涂料。该树脂结合低粘度的环氧树脂用于制备纹理涂料。用于要求反应性、低温烘烤和纹理的应用场合
Request Sample CRYLCOAT® 1510-0 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 1510-0 is a carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. Coatings based on CRYLCOAT® 1510-0 exhibit excellent flow, high gloss, and excellent wetting of fillers and pigments.
Request Sample CRYLCOAT® 1514-2 Allnex - Powder Coating Resins 粉末涂料树脂 中等反应活性的羧基树脂,设计用于50/50混合型粉末涂料。具有良好的流平和出色的耐过烘烤性能
Request Sample CRYLCOAT® 1540-0 Allnex - Powder Coating Resins 粉末涂料树脂 高反应活性羧基聚酯树脂,以50/50制备混合型粉末涂料。具有出色的流平性和高光泽,以及良好的填料和颜料润湿性。用于需要润湿的应用场合和器械应用
Request Sample CRYLCOAT® 1544-0 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 1544-0 is a low reactive carboxyl functional polyester resin for use in the manufacture of 50/50 or 60/40 hybrid powder coatings. CRYLCOAT® 1544-0 is compatible with other carboxyl functional polyester resins and can be blended in all ratios to ...展开 CRYLCOAT® 1544-0 is a low reactive carboxyl functional polyester resin for use in the manufacture of 50/50 or 60/40 hybrid powder coatings. CRYLCOAT® 1544-0 is compatible with other carboxyl functional polyester resins and can be blended in all ratios to provide intermediate reactivity. 收起
Request Sample CRYLCOAT® 1545-6 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 1545-6 is a tin-free highly reactive carboxylated polyester resin for use in 50/50 hybrid powder coatings suitable for heat sensitive substrates. Coatings based on CRYLCOAT® 1545-6 exhibit good mechanical properties and physical ageing stability...展开 CRYLCOAT® 1545-6 is a tin-free highly reactive carboxylated polyester resin for use in 50/50 hybrid powder coatings suitable for heat sensitive substrates. Coatings based on CRYLCOAT® 1545-6 exhibit good mechanical properties and physical ageing stability. 收起
Request Sample CRYLCOAT® 1572-0 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 1572-0是一种高反应活性羧基官能团聚酯树脂,可用于制备50/50混合型粉末涂料。采用CRYLCOAT® 1572-0制备的涂料在130 °C固化后具有良好的机械性能
Request Sample CRYLCOAT® 1572-6 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 1572-6 is a high reactive carboxyl functional polyester resin for use in the production of 50/50 hybrids powder coatings. Coatings made with CRYLCOAT® 1572-6 exhibit good mechanical properties when cured at a temperature level of 130 °C.
Request Sample CRYLCOAT® 1573-0 Allnex - Powder Coating Resins 粉末涂料树脂 中等反应活性羧基官能团聚酯树脂,结合环氧当量700-900的环氧树脂以50/50制备混合型粉末涂料。具有出色的流平性能和非常好的光泽。适合新型应用场合
Request Sample CRYLCOAT® 1574-6 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 1574-6 is a highly reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. The resin is particularly suitable for the production of coatings for cure at temperatures between 130° and 140° C on MDF substra...展开 CRYLCOAT® 1574-6 is a highly reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. The resin is particularly suitable for the production of coatings for cure at temperatures between 130° and 140° C on MDF substrates. Coatings based on CRYLCOAT® 1574-6 combine good flow with high gloss. 收起
Request Sample CRYLCOAT® 1581-6 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 1581-6 is an organo-tin free highly reactive carboxyl functional polyester resin for use in the production of 50/50 hybrid powder coatings. This resin is designed for use with low viscosity epoxy resins and is suitable for the production of coat...展开 CRYLCOAT® 1581-6 is an organo-tin free highly reactive carboxyl functional polyester resin for use in the production of 50/50 hybrid powder coatings. This resin is designed for use with low viscosity epoxy resins and is suitable for the production of coatings at cure temperatures as low as 130° C on MDF substrates. 收起
Request Sample CRYLCOAT® 1593-0 Allnex - Powder Coating Resins 粉末涂料树脂 高反应活性羧基聚酯树脂,可结合环氧树脂EEW 700-900按比例50/50制备混合型粉末涂料。基于Crylcoat™ 1593-0的涂料结合了良好的流平性和良好的光泽。用于新一代要求中温烘烤的应用场合
Request Sample CRYLCOAT® 1616-2 Allnex - Powder Coating Resins 粉末涂料树脂 低反应活性羧基官能团聚酯树脂,具有高Tg值,结合环氧当量700-900的环氧树脂以60/40制备混合型粉末涂料。具有出色的流平性能和非常好的光泽。适合新生代和要求高Tg的应用场合
Request Sample CRYLCOAT® 1620-0 Allnex - Powder Coating Resins 粉末涂料树脂 羧基官能团聚酯树脂,与环氧树脂EEW 700-900以50/50到60/40比例制备混合型粉末涂料。适合器械,金属制办公家具应用
Request Sample CRYLCOAT® 1622-0 Allnex - Powder Coating Resins 粉末涂料树脂 低反应活性羧基官能团聚酯树脂,结合环氧树脂EEW 700-900,按50/50到60/40比例制造混合型粉末涂料。用于要求流平、低光泽的应用场合以及器械和汽车应用
Request Sample CRYLCOAT® 1626-0 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 1626-0 is a carboxylated polyester resin for use in medium-cure 60/40 hybrid powder coatings. Formulations based on CRYLCOAT® 1626-0 exhibit excellent flow and can be used in economical formulations.
Request Sample CRYLCOAT® 1627-0 Allnex - Powder Coating Resins 粉末涂料树脂 羧基树脂,与环氧树脂EEW 700-900以60-40比例制备混合型粉末涂料。结合了出色的流平性和非常好的光泽。适合新一代要求良好流平性、良好消光性、高Tg的应用场合和金属制办公家具应用
Request Sample CRYLCOAT® 1630-0 Allnex - Powder Coating Resins 粉末涂料树脂 低反应活性羧基官能团聚酯树脂,结合环氧树脂EEW 700-900,按50/50到60/40比例使用
Request Sample CRYLCOAT® 1631-0 Allnex - Powder Coating Resins 粉末涂料树脂 中等反应活性羧基官能团聚酯树脂,结合环氧当量700-900的环氧树脂以50/50到60/40制备混合型粉末涂料。具有良好的储藏稳定性。适合要求高Tg和流平性的应用场合
Request Sample CRYLCOAT® 1632-0 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 1632-0是一种中等反应活性羧基官能团聚酯树脂,结合环氧当量为700-900的环氧树脂,以50/50到60/40制备混合型粉末涂料
Request Sample CRYLCOAT® 1648-2 Allnex - Powder Coating Resins 粉末涂料树脂 羧基聚酯树脂,可用于制备中速固化的60/40混合型粉末涂料。基于CRYLCOAT® E 04148的涂料具有良好的流平、出色的机械性能和耐水煮测试性能。CRYLCOAT® E 04148是一支正在开发中的产品
Request Sample CRYLCOAT® 1648-2 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 1648-2 is a carboxylated polyester resin for use in medium-cure 60/40 hybrid powder coatings. Coatings based on this product, exhibit good flow with excellent mechanical properties, gloss and boiling water test resistance.
Request Sample CRYLCOAT® 1650-2 Allnex - Powder Coating Resins 粉末涂料树脂 低反应活性羧基树脂,用于制备60/40混合型粉末涂料。结合了高光泽和出色的流平性能。适合消光和设备上应用
Request Sample CRYLCOAT® 1660-0 Allnex - Powder Coating Resins 粉末涂料树脂 低反应活性、羧基官能团聚酯树脂,设计用于制备60/40混合型粉末涂料。当使用高含量填料时,它仍具有良好的柔韧性、高光泽和杰出的流平。应用于需要流平的场合和金属办公家具
Request Sample CRYLCOAT® 1660-5 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 1660-5 is a carboxyl functional poly-ester resin for use in medium-reactive 60/40 hybrid powder coatings. Coatings based on CRYLCOAT® 1660-5 exhibit good flexibility, high gloss, and outstanding flow using high amounts of filler.
Request Sample CRYLCOAT® 1680-6 Allnex - Powder Coating Resins 粉末涂料树脂 高反应活性羧基聚酯树脂,用于制备60/40混合型粉末涂料。结合了良好的柔韧性和流平性以及高光泽。使用Crylcoat™ 1680-6的配方中可以加入较多的填料。用于要求反应活性、中温烘烤、流平性和填料负载的应用场合
Request Sample CRYLCOAT® 1683-0 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 1683-0 is a high Tg carboxyl functional polyester resin for use with epoxy resins EEW 700-900 in a ratio 60/40 to manufacture hybrid powder coatings to be cured at 200°C. Formulations containing CRYLCOAT® 1683-0 exhibit excellent solvent resista...展开 CRYLCOAT® 1683-0 is a high Tg carboxyl functional polyester resin for use with epoxy resins EEW 700-900 in a ratio 60/40 to manufacture hybrid powder coatings to be cured at 200°C. Formulations containing CRYLCOAT® 1683-0 exhibit excellent solvent resistance. 收起
Request Sample CRYLCOAT® 1690-0 Allnex - Powder Coating Resins 粉末涂料树脂 羧基聚酯树脂,可用于制备180°C固化的60/40混合型粉末涂料。基于CRYLCOAT® 1690-0的涂料具有杰出的流平性和出色的机械性能以及耐清洗剂性能
Request Sample CRYLCOAT® 1701-0 Allnex - Powder Coating Resins 粉末涂料树脂 高反应活性饱和聚酯树脂,用于70/30混合型粉末涂料。具有出色的机械性能,非常好的流平性和耐过烘烤性能。用于要求高Tg和中等烘烤温度的应用场合
Request Sample CRYLCOAT® 1702-0 Allnex - Powder Coating Resins 粉末涂料树脂 饱和聚酯树脂,用于制备70/30混合型粉末涂料。具有出色的流平以及低反应活性和固化速度,可通过促进剂加速。适合要求流平的应用场合
Request Sample CRYLCOAT® 1703-1 Allnex - Powder Coating Resins 粉末涂料树脂 不含TMA,具有摩擦带电活性的羧基聚酯树脂,设计用于制备70/30混合型粉末涂料。具有出色的流平和良好的光泽。适合要求过烘烤性能的应用场合
Request Sample CRYLCOAT® 1716-0 Allnex - Powder Coating Resins 粉末涂料树脂 中等反应活性羧基聚酯树脂,设计用于制备70/30混合型粉末涂料。具有良好的流平性能和非常高的光泽。可结合Vestagon B68 (Degussa)制备低光涂料。适合要求流平和金属办公家具应用场合
Request Sample CRYLCOAT® 1732-0 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 1732-0 is a carboxyl functional polyester resin for use with epoxy resins in a 70/30 ratio to manufacture low bake hybrid powder coatings suitable for curing at a temperature level of 160 °C. Formulations based on CRYLCOAT® 1732-0 provide good f...展开 CRYLCOAT® 1732-0 is a carboxyl functional polyester resin for use with epoxy resins in a 70/30 ratio to manufacture low bake hybrid powder coatings suitable for curing at a temperature level of 160 °C. Formulations based on CRYLCOAT® 1732-0 provide good flow and gloss combined with improved flexibility and ageing resistance. 收起
Request Sample CRYLCOAT® 1738-2 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 1738-2 is a medium reactive carboxyl functional polyester resin for use in the production of 70/30 hybrid powder coatings. This resin allows the formulation of affordable powder coatings with good overall performances and good flow out and appea...展开 CRYLCOAT® 1738-2 is a medium reactive carboxyl functional polyester resin for use in the production of 70/30 hybrid powder coatings. This resin allows the formulation of affordable powder coatings with good overall performances and good flow out and appearance. 收起
Request Sample CRYLCOAT® 1756-0 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 1756-0 is a highly reactive, TMA-free carboxylated polyester resin for use in the production of 70/30 hybrid powder coatings. Formulations based on CRYLCOAT® 1756-0 exhibit excellent flow and good gloss.
Request Sample CRYLCOAT® 1770-0 Allnex - Powder Coating Resins 粉末涂料树脂 中等反应活性羧基官能团聚酯树脂,结合环氧当量700-900的环氧树脂以70/30制备混合型粉末涂料。可与Crylcoat™ 1783-0以任意比例混合,提供中间反应活性。适合金属办公家具应用场合
Request Sample CRYLCOAT® 1781-0 Allnex - Powder Coating Resins 粉末涂料树脂 中等反应活性羧基官能团聚酯树脂,具有高Tg,结合环氧当量700-900的环氧树脂以70/30制备混合型粉末涂料。具有良好的流平性和非常好的光泽。适合新型,要求高Tg,流平性和金属办公家具应用场合
Request Sample CRYLCOAT® 1791-2 Allnex - Powder Coating Resins 粉末涂料树脂 中等反应活性羧基官能团聚酯树脂,可与环氧当量700-900的环氧树脂,以70/30的比例制备混合型粉末涂料。含CRYLCOAT® E 04281的配方具有良好的流平、机械性能以及非常好的燃气炉耐受性
Request Sample CRYLCOAT® 1843-0 Allnex - Powder Coating Resins 粉末涂料树脂 羧基官能团聚酯树脂,与环氧树脂EEW 700-900以80/20的比例制备混合型粉末涂料。适合新一代要求高Tg的应用场合
Request Sample CRYLCOAT® 1853-2 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 1853-2 is a carboxyl functional polyester resin for use with epoxy resins EEW 700-900 in an 80/20 ratio to manufacture hybrid powder coatings.
Request Sample CRYLCOAT® 2401-2 Allnex - Powder Coating Resins 粉末涂料树脂 低反应活性羧基聚酯树脂,与TGIC,以93/7制备粉末涂料。具有杰出的流平性,高柔韧性和出色的户外耐候性。适合要求流平性能的应用场合
Request Sample CRYLCOAT® 2409-0 Allnex - Powder Coating Resins 粉末涂料树脂 高反应活性,无TMA的羧基聚酯树脂,结合TGIC用于制造粉末涂料。具有杰出的流平性,出色的户外耐候性,可稳定地用于直燃式燃气炉
Request Sample CRYLCOAT® 2411-2 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 2411-2 is a carboxylated polyester resin for use in 93/7 TGIC powder coatings. Coatings based on CRYLCOAT® 2411-2 exhibit outstanding flow, very good flexibility, improved ageing stability and excellent outdoor durability.
Request Sample CRYLCOAT® 2415-2 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 2415-2 is a carboxylated polyester resin for use with TGIC in a 90/10 ratio to manufacture powder coatings preferably smooth G 20 matte dry blend systems in com- bination with CRYLCOAT® 2452-2. Formulations based on CRYLCOAT® 2415-2 exhibit good...展开 CRYLCOAT® 2415-2 is a carboxylated polyester resin for use with TGIC in a 90/10 ratio to manufacture powder coatings preferably smooth G 20 matte dry blend systems in com- bination with CRYLCOAT® 2452-2. Formulations based on CRYLCOAT® 2415-2 exhibit good flow, high solvent resistance, excellent outdoor weathering resistance and outstanding storage stability. 收起
Request Sample CRYLCOAT® 2419-2 Allnex - Powder Coating Resins 粉末涂料树脂 低反应活性羧基聚酯树脂,可与TGIC或Primid® XL 552固化。基于CRYLCOAT® E 04219的配方需要的固化剂量低,具有良好的过烘烤耐受性和户外耐候性
Request Sample CRYLCOAT® 2421-5 Allnex - Powder Coating Resins 粉末涂料树脂 中等反应活性,不含TMA的羧基聚酯树脂,结合TGIC使用。具有杰出的流平性能,并且对热稳定。可考虑用于PCM应用场合。适合卷材和PCM应用
Request Sample CRYLCOAT® 2425-0 Allnex - Powder Coating Resins 粉末涂料树脂 中等反应活性羧基官能团聚酯树脂,用于配制TGIC固化的粉末涂料。含有Crylcoat™ 2425-0的配方具有良好的户外耐久性,良好的流平性和机械性能。适合要求高Tg的应用场合,汽车以及草坪和花园器械应用
Request Sample CRYLCOAT® 2427-2 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 2427-2 is a carboxyl functional polyester resin for use in combination with TGIC in 95/5 ratio or with HAA hardener in 96/4 ratio. Formulations based on CRYLCOAT® 2427-2 have excellent suitability for general industrial applications.
Request Sample CRYLCOAT® 2430-0 Allnex - Powder Coating Resins 粉末涂料树脂 羧基聚酯树脂,用于TGIC或PT-910固化粉末涂料。用Araldite PT-910制备的涂料配方具有高玻璃化转变温度。适合要求高Tg的应用场合和卡车底盘应用
Request Sample CRYLCOAT® 2431-0 Allnex - Powder Coating Resins 粉末涂料树脂 羧基聚酯树脂,200° C下固化。具有良好的流平性,高耐溶剂性,出色的户外耐候性和杰出的储存稳定性。适合低光干混涂料和建材应用
Request Sample CRYLCOAT® 2432-0 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 2432-0 is a carboxylated polyester resin for use with TGIC in a 96/4 ratio for the production of powder coatings.Coatings based on CRYLCOAT® 2432-0 can be dry-blended with CRYLCOAT® 2414-0 based powders to give matte coatings that exhibit good s...展开 CRYLCOAT® 2432-0 is a carboxylated polyester resin for use with TGIC in a 96/4 ratio for the production of powder coatings.Coatings based on CRYLCOAT® 2432-0 can be dry-blended with CRYLCOAT® 2414-0 based powders to give matte coatings that exhibit good smoothness and good outdoor durability. 收起
Request Sample CRYLCOAT® 2433-2 Allnex - Powder Coating Resins 粉末涂料树脂 羧基聚酯树脂,设计用于93/7 TGIC快速固化粉末涂料配方。具有良好的流平性,高柔韧性以及出色的户外耐候性。适合要求反应活性的应用场合
Request Sample CRYLCOAT® 2437-2 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 2437-2 is a TMA-free carboxyl functional polyester resin for use with TGIC in the manufacture of powder coatings. Formulations based on CRYLCOAT® 2437-2 are non-blooming and exhibit outstanding flow, excellent outdoor durability and are stabiliz...展开 CRYLCOAT® 2437-2 is a TMA-free carboxyl functional polyester resin for use with TGIC in the manufacture of powder coatings. Formulations based on CRYLCOAT® 2437-2 are non-blooming and exhibit outstanding flow, excellent outdoor durability and are stabilized for direct fired gas ovens. 收起
Request Sample CRYLCOAT® 2440-2 Allnex - Powder Coating Resins 粉末涂料树脂 羧基聚酯树脂,用于93/7 TGIC粉末涂料。具有杰出的流平性,良好的柔韧性和出色的户外耐候性
Request Sample CRYLCOAT® 2441-2 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 2441-2 is a carboxylated polyester resin for use in 93/7 TGIC powder coatings. Coatings based on CRYLCOAT® 2441-2 exhibit outstanding flow, very good flexibility, improved ageing stability and excellent outdoor durability.
Request Sample CRYLCOAT® 2441-2HR Allnex - Powder Coating Resins 粉末涂料树脂 羧基聚酯树脂,用于93/7 TGIC粉末涂料。具有杰出的流平性,非常好的柔韧性,出色的户外耐候性和非常好的储存稳定性。适合建材,HVAC和汽车应用
Request Sample CRYLCOAT® 2441-3 Allnex - Powder Coating Resins 粉末涂料树脂 羧基聚酯,用于制备93/7 TGIC粉末涂料。结合了良好的机械性能和出色的流平性,具有摩擦带电性
Request Sample CRYLCOAT® 2443-3 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 2443-3 is a tribo enhanced carboxyl functional polyester resin for the formulation of powder coatings with 7% TGIC.
Request Sample CRYLCOAT® 2450-2 Allnex - Powder Coating Resins 粉末涂料树脂 中等反应活性羧基聚酯树脂,结合TGIC以93/7制备粉末涂料。具有良好的流平性能,良好的柔韧性和出色的户外耐候性。适合建材应用场合
Request Sample CRYLCOAT® 2451-6 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 2451-6 is a low viscosity carboxyl- functional polyester resin for use with TGIC in the production of low bake powder coatings as shown in cure curve for 93/7 ratio. Coatings based on CRYLCOAT® 2451-6 cured at 10 min x 150°C combine excellent fl...展开 CRYLCOAT® 2451-6 is a low viscosity carboxyl- functional polyester resin for use with TGIC in the production of low bake powder coatings as shown in cure curve for 93/7 ratio. Coatings based on CRYLCOAT® 2451-6 cured at 10 min x 150°C combine excellent flexibility, adhesion, gloss and film hardness. 收起
Request Sample CRYLCOAT® 2452-2 Allnex - Powder Coating Resins 粉末涂料树脂 羧基聚酯树脂,200°C下固化。具有良好的流平性,高耐溶剂性,出色的户外耐候性和杰出的储存稳定性。用于低光干混涂料和建材应用
Request Sample CRYLCOAT® 2453-2 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 2453-2 is a carboxyl functional polyester resin for use with 7% TGIC in the production of powder coatings. Formulations based on CRYLCOAT® 2453-2 exhibit good flow, excellent outdoor durability, flexibility and improved boiling water resistance.
Request Sample CRYLCOAT® 2454-2 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 2454-2 is a carboxyl functional polyester resin for use with 7% TGIC in the production of powder coatings. Formulations based on CRYLCOAT® 2454-2 exhibit out-standing flow, excellent outdoor durability, very good flexibility, physical aging and ...展开 CRYLCOAT® 2454-2 is a carboxyl functional polyester resin for use with 7% TGIC in the production of powder coatings. Formulations based on CRYLCOAT® 2454-2 exhibit out-standing flow, excellent outdoor durability, very good flexibility, physical aging and storage stability. 收起
Request Sample CRYLCOAT® 2468-5 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 2468-5 is a low reactive, carboxyl functional polyester resin for use with 7% TGIC in the production of industrial powder coatings. CRYLCOAT® 2468-5 has good suitability to formulate matte coatings. Formulations based on CRYLCOAT® 2468-5 exhibit...展开 CRYLCOAT® 2468-5 is a low reactive, carboxyl functional polyester resin for use with 7% TGIC in the production of industrial powder coatings. CRYLCOAT® 2468-5 has good suitability to formulate matte coatings. Formulations based on CRYLCOAT® 2468-5 exhibit good outdoor durability, flow and mechanical properties. 收起
Request Sample CRYLCOAT® 2471-4 Allnex - Powder Coating Resins 粉末涂料树脂 羧基聚酯树脂,与TGIC以93/7制备透明户外耐候粉末涂料。具有最佳流平性和透明度。适合要求流平的应用场合
Request Sample CRYLCOAT® 2472-4 Allnex - Powder Coating Resins 粉末涂料树脂 羧基聚酯树脂,与TGIC以93/7制备透明户外耐候粉末涂料。具有最佳流平性和透明度。适合要求高Tg的应用场合
Request Sample CRYLCOAT® 2473-4 Allnex - Powder Coating Resins 粉末涂料树脂 羧基聚酯树脂,用于制备透明户外耐候粉末涂料。低温固化条件下,提供最佳流平性和透明度。适合要求不起霜的应用场合