| Advantage™ AM1512A | Ashland | Advantage™ AM1512A is a 100% active foam control agent designed specifically for use in water-based paint systems. It is a high efficiency, hydrocarbon oil-based antifoaming agent and is formulated to control foam at any point during manufacture, packagin...展开 Advantage™ AM1512A is a 100% active foam control agent designed specifically for use in water-based paint systems. It is a high efficiency, hydrocarbon oil-based antifoaming agent and is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH and it is effective in the presence of many surfactants. Advantage™ AM1512A foam control agent is readily dispersible, has an outstanding long-term foam control persistency, and Advantage™ AW8176 defoamer is readily dispersible, has very good long-term persistency, and it is recommended for architectural paints, emulsions plasters, pigment/filler slurries, as well as industrial wood coatings. 收起 | |
| Aquaflow™ NHS-300 | Ashland | Aquaflow™ NHS-300 is a rheology modifier for waterborne architectural coatings. A solvent-free, nonionic associative polymer solution designed to increase high-shear viscosity and provide superior flow and leveling in latex paints. | |
| Aquaflow™ NHS-350 | Ashland | Aquaflow™ NHS-350 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. | |
| Aquaflow™ NHS-355 | Ashland | Aquaflow™ NHS-355 rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development...展开 Aquaflow™ NHS-355 rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build, and favorable brush drag. As an APEO-free and solvent-free product, Aquaflow™ NHS-355 rheology modifier is recommended for low VOC formulations. It is supplied as a low viscosity liquid for ease of handling. The performance of the product is independent of paint pH 收起 | |
| Aquaflow™ NHS-360 | Ashland | Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings, and is compatible with most modern latex resin systems and all sheens. This thickener prov...展开 Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings, and is compatible with most modern latex resin systems and all sheens. This thickener provides highly efficient ICI viscosity development, excellent film build, optimal flow and leveling and favorable brush drag. 收起 | |
| Aquaflow™ NLS-200 | Ashland | Aquaflow™ NLS-200 is a rheology modifier for waterborne architectural coatings. A nonionic associative polymer solution designed to build stormer viscosity and provide superior flow and leveling in latex paints. | |
| Aquaflow™ NLS-210 | Ashland | Aquaflow™ NLS-210 is a nonionic associative polymer solution designed to increase Stormer consistency and provide superior flow and leveling in waterborne paints and coatings. | |
| Aquaflow™ NLS-220 | Ashland | Aquaflow™ NLS-220 is a solvent free nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. It can be used with a wide variety of binder chemistries including v...展开 Aquaflow™ NLS-220 is a solvent free nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. It can be used with a wide variety of binder chemistries including vinyl acrylics, ethylene vinyl acetates, alkyd emulsions and in particular pure acrylics and styrene acrylics. It rapidly equilibrates to target low- or mid-shear viscosity with no negative impact on gloss or color stability. 收起 | |
| Aquaflow™ NMS-450 | Ashland | Aquaflow™ NMS-450 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. | |
| Aquaflow™ NMS-460E | Ashland | Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of S...展开 Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of Stormer (KU) viscosity along with high-shear (ICI) viscosity, and thus can be considered a mid-shear effective thickener that can function as the sole thickener in many paint formulation based on hydrophobic resins, such as acrylics and styrene acrylics. With more hydrophilic resins, such as vinyl acetate ethylene (VAE), optimized rheology may be achieved with Aquaflow™ NMS-460E rheology modifier alone or in combination with a supplemental KU driver. 收起 | |
| Aquaflow™ XLS-500 | Ashland | Aquaflow™ XLS-500 is non-ionic synthetic associative rheology modifier for low-VOC acrylic based paints & coatings. | |
| Aquaflow™ XLS-525 | Ashland | Aquaflow™ XLS-525 is a non-ionic synthetic associative rheology modifier for low-VOC paints and coatings. | |
| Aquaflow™ XLS-530 | Ashland | Aquaflow™ XLS-530 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. | |
| Culminal™ C-types modified cellulose ethers | Ashland | Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plas...展开 Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plasters, fillers, adhesives and spackling compounds, cement and lime based plasters, tile cements and similar products. 收起 | |
| Dextrol™ OC-110 | Ashland | Dextrol™ OC-110 is the free-acid form of a nonyl phenol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-15 | Ashland | Dextrol™ OC-15 is the free acid form of a nonyl phenol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-180 | Ashland | 它是一种乙氧基化脂肪醇磷酸酯的中和态（钾盐）。它设计用于为水性乳胶漆改善光泽度和颜色接受性 | |
| Dextrol™ OC-180HS Phosphate Ester Surfactant | Ashland | Dextrol™ OC-180HS表面活性剂是乙氧基脂肪醇磷酸酯的中和（钠盐）形式。它设计用于改善光泽度和在水性乳胶漆中的色彩接受度。根据配方的不同特点，这款产品还可以用作有助于减少颜料凝絮的补充分散剂。除了在乳胶漆中使用，Dextrol™ OC-180HS表面活性剂还可以提供普遍着色特性，有助于分散和稳定颜料，从而改善水基油漆的色彩接受度。 | |
| Dextrol™ OC-50 | Ashland | Dextrol™ OC-50 is the neutralized (sodium salt) form of a nonyl phenol ethoxylated phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. | |
| Dextrol™ OC-60 | Ashland | Dextrol™ OC-60 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-60EP | Ashland | Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...展开 Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-60EP surfactant can be neutralized using several organic or inorganic bases. Dextrol OC-60EP surfactant also imparts improved gloss and color acceptance in waterborne latex paints. 收起 | |
| Dextrol™ OC-70 | Ashland | Dextrol™ OC-70 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-70EP | Ashland | Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...展开 Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-70EP phosphate ester surfactant can be neutralized by the user using a number of organic or inorganic bases. 收起 | |
| Drewplus* L-3500 Foam Control Agent | Ashland | Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spr...展开 Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spray, air mix or HVLP. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. 收起 | |
| Drewplus™ L-3510 Foam Control Agent | Ashland | Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatib...展开 Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. 收起 | |
| Drewplus™ TS-4384 Foam Control Agent | Ashland | Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-glos...展开 Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss acrylic architectural paints, water- based parquet lacquers. Excellent results have also been obtained in acrylic anti- corrosive primers, flexographic printing inks and water-reducible alkyd based systems. Drewplus™ TS-4384 foam control agent is highly efficient and exhibits excellent persistency. 收起 | |
| Drewplus™ TS-4481 Foam Control Agent | Ashland | Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and c...展开 Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and compatibility. Since it functions as an air release agent it is particularly effective on microfoam in spray-applied industrial coatings. 收起 | |
| Micronized Polyethylene Powder (SZ1803) | Huangshan Banner Technology Co., Ltd. | Micronized Polyethylene Powder (SZ1803) is a very fine white thermoplastic polyethylene powder with a particle size between 10 - 15μm. This product is used as a powder coating and effective basic additive in paints, varnishes, masterbatch and metal and ce...展开 Micronized Polyethylene Powder (SZ1803) is a very fine white thermoplastic polyethylene powder with a particle size between 10 - 15μm. This product is used as a powder coating and effective basic additive in paints, varnishes, masterbatch and metal and ceramic sintering. 收起 | |
| Natrosol™ 250 Hydroxyethylcellulose | Ashland | Natrosol™ 250 Hydroxyethylcellulose is a nonionic water-soluble cellulose ether. | |
| Natrosol™ B Hydroxyethylcellulose | Ashland | Natrosol™ B HEC，非离子型水溶性聚合物，是一种白色，自由流动的粒状粉末。它不溶于有机溶剂，但它很容易分散在冷水和热水中，得到不同粘度的溶液。此产品被用作增稠剂，保护胶体，基料，稳定剂和助悬剂，特别是应用于的需要非离子型材料的场合。 | |
| Natrosol™ FPS | Ashland | Natrosol™ FPS has high solids liquid suspensions designed for easy handling in conventional paint manufacturing equipment. | |
| Natrosol™ FPS Plus 330 | Ashland | Natrosol™ FPS Plus 330 is a aqueous dispersions of cellulosic water-soluble polymers for use as latex paint thickeners. | |
| Natrosol™ Hydroxyethylcellulose | Ashland | Natrosol™ Hydroxyethylcellulose is a nonionic water-soluble polymer derived from cellulose and its solutions are unaffected by cations. It dissolves readily in cold or hot water and is used to produce solutions having a wide range of viscosity. | |
| Natrosol™ Performax | Ashland | Natrosol™ hydroxyethylcellulose (HEC) 在过去的50年中始终是行业内领先的水基建筑涂料增稠剂。而现在Natrosol Performax HEC允许涂料生产商在涂料生产的任意时间点添加干燥形式的HEC而不会产生结块，这一特性将涂料制造过程中的灵活性和产品质量带到了一个史无前例的水平。 | |
| Natrosol™ Plus | Ashland | Natrosol™ Plus is a associative cellulosic polymer designed specifically for use in latex paints. | |
| Natrosol™ Plus 330 HMHEC | Ashland | Natrosol™ Plus 330 hydrophobically modified hydroxyethylcellulose (HMHEC) is an associative cellulosic polymer designed specifically for use in latex paints. It is a nonionic water-soluble polymer that contains both hydroxyethyl and long-chain alkyl group...展开 Natrosol™ Plus 330 hydrophobically modified hydroxyethylcellulose (HMHEC) is an associative cellulosic polymer designed specifically for use in latex paints. It is a nonionic water-soluble polymer that contains both hydroxyethyl and long-chain alkyl groups. This unique dual substitution differentiation this rheology modifier from unmodified cellulosics. 收起 | |
| Natrosol™ Plus 550 HMHEC | Ashland | Natrosol™ Plus 550 hydrophobically modified hydroxyethylcellulose (HMHEC) is a highly efficient, nonionic associative cellulosic polymer developed to provide rheology control of latex paints. Natrosol™ Plus 550 exhibits excellent enzyme resistance and imp...展开 Natrosol™ Plus 550 hydrophobically modified hydroxyethylcellulose (HMHEC) is a highly efficient, nonionic associative cellulosic polymer developed to provide rheology control of latex paints. Natrosol™ Plus 550 exhibits excellent enzyme resistance and imparts excellent creamy in-can feel and smooth flow characteristics to water-based latex paints and coatings. 收起 | |
| pHLEX™ 100 | Ashland | pHLEX™ 100 neutralizing agent for paints and coatings is a low-odor, pH neutralizing and stabilizing additive designed for easy incorporation and long-term pH stability in all types of latex, emulsion and water reducible paints and coating. It was designe...展开 pHLEX™ 100 neutralizing agent for paints and coatings is a low-odor, pH neutralizing and stabilizing additive designed for easy incorporation and long-term pH stability in all types of latex, emulsion and water reducible paints and coating. It was designed to replace ammonium hydroxide and other organoamine pH neutralizers. Significant odor reduction of the final paint formulation it typically achieved through the use of pHLEX™ 100 neutralizing agent, particularly when used in place of ammonium hydroxide. 收起 | |
| pHLEX™ 110 | Ashland | pHLEX™ 110 neutralizing agent for paints and coatings is a low-odor, pH neutralizing and stabilizing additive designed for easy incorporation and long-term pH stability in all types of latex, emulsion and water reducible paints and coating. It was designe...展开 pHLEX™ 110 neutralizing agent for paints and coatings is a low-odor, pH neutralizing and stabilizing additive designed for easy incorporation and long-term pH stability in all types of latex, emulsion and water reducible paints and coating. It was designed to replace ammonium hydroxide and other organoamine pH neutralizers. Significant odor reduction of the final paint formulation it typically achieved through the use of pHLEX™ 110 neutralizing agent, particularly when used in place of ammonium hydroxide. 收起 | |
| Polypropylene Compatibilizer (SZ23) | Huangshan Banner Technology Co., Ltd. | Polypropylene Compatibilizer (SZ23) (maleic anhydride modified polypropyylene) is a white or light yellow pellet with a high reactivity and flow ability used as a bridge, of sorts, between non-polar and polar materials for improved binding capacity and co...展开 Polypropylene Compatibilizer (SZ23) (maleic anhydride modified polypropyylene) is a white or light yellow pellet with a high reactivity and flow ability used as a bridge, of sorts, between non-polar and polar materials for improved binding capacity and compatibility. This product can be applied to thermoplastic powder coatings. 收起 | |
| Powder Coatings Adhesion Promoter（SZ07） | Huangshan Banner Technology Co., Ltd. | Powder Coatings Adhesion Promoter（SZ07）(maleic anhydride modified polyetylene) is a white pellet with high reactivity and low residual monomer and gel content. This product can be used as a bridge, of sorts, between non-polar and polar materials to improv...展开 Powder Coatings Adhesion Promoter（SZ07）(maleic anhydride modified polyetylene) is a white pellet with high reactivity and low residual monomer and gel content. This product can be used as a bridge, of sorts, between non-polar and polar materials to improve binding and compatibility in thermoplastic powder coatings. 收起 | |
| PVP K-120 | Ashland | 惰性的聚乙烯吡咯烷酮，可被水及大部分常见的有机增塑剂增塑。可用于金属淬火浴。 | |
| PVP K-15 | Ashland | 惰性的聚乙烯吡咯烷酮，可被水及大部分常见的有机增塑剂增塑。可用于清洁剂中抑制染料迁移，用于平板印刷中增强油墨的憎水性。 | |
| PVP K-30 | Ashland | 惰性的聚乙烯吡咯烷酮，可被水及大部分常见的有机增塑剂增塑，用途广泛。 | |
| PVP K-60 | Ashland | 聚乙烯基吡咯烷酮，认为是生理学惰性的，可用水和大多数常用有机增塑剂增塑 | |
| PVP K-90 | Ashland | 惰性的聚乙烯吡咯烷酮，可被水及大部分常见的有机增塑剂增塑，用途广泛。 | |
| Strodex™ FT-100 | Ashland | 可在水性涂料中提高色浆的分散稳定性，减少浮色和擦拭掉色。它可作为主要或辅助乳化剂用于制备水性乳液体系。它可为成品乳胶提供良好的机械性能和储存性能以及低凝结点 | |
| Strodex™ FT-427 | Ashland | Strodex™ FT-427是一种磷酸酯表面活性剂，适用于水性建筑涂料。Strodex™ FT-427基于中性（钾盐）乙氧基磷酸酯 | |
| Strodex™ FT-428 Surfactant | Ashland | Strodex™ FT-428 is a neutralized surfactant based on phosphate ester. It is designed to impart superior stability to latex paints, including mechanical as well as freeze-thaw stability. Depending on the formulation specifics, Strodex™ FT-428 surfactant ca...展开 Strodex™ FT-428 is a neutralized surfactant based on phosphate ester. It is designed to impart superior stability to latex paints, including mechanical as well as freeze-thaw stability. Depending on the formulation specifics, Strodex™ FT-428 surfactant can also function as a strong wetting agent and dispersant aid and help reduce pigment flocculation. This product does not contain any alkyl phenol ethoxylates (APEOs). 收起 | |
| Strodex™ FT-50K | Ashland | 低起泡磷酸酯表面活性剂，可提高展色性，减少浮色和擦拭掉色。它作为辅助分散剂可减少絮凝 | |
| Strodex™ FT-68 | Ashland | Strodex™ FT-68 is a specialty surfactant based neutralized (potassium salt) form of a phosphate ester. It is designed to impart superior stability to latex paints, including freeze-thaw as well as mechanical stability. | |
| Strodex™ KM-0VOC | Ashland | 该表面活性剂是脂肪醇磷酸酯的中和态（钾盐）。它可为乳胶漆提供出色的低水敏感性和稳定性。尤其适合用于含氧化锌或其它活性颜料的油漆中。它也非常适合用于防腐蚀，防闪锈和防钉头锈蚀 | |
| Strodex™ PK-0VOC | Ashland | 它是一种脂肪醇磷酸共酯的中和态（钾盐）。它设计用于为水性乳胶漆改善光泽度和颜色接受性 | |
| Strodex™ PK-85NV Surfactant | Ashland | Strodex™ PK-85NV surfactant is the neutralized (potassium salt) form of a phosphate coester of aliphatic alcohols. It imparts improved substrate wetting, gloss, and color acceptance in waterborne latex paints. Depending on the formulation specifics, Strod...展开 Strodex™ PK-85NV surfactant is the neutralized (potassium salt) form of a phosphate coester of aliphatic alcohols. It imparts improved substrate wetting, gloss, and color acceptance in waterborne latex paints. Depending on the formulation specifics, Strodex™ PK-85NV surfactant can also function as a supplemental dispersant to assist in reduction of pigment flocculation. This product does not contain any alkyl phenol ethoxylates (APEOs). 收起 | |
| Strodex™ PK-90 | Ashland | Strodex™ PK-90 is the neutralized (potassium salt) form of a phosphate coester of aliphatic alcohols. It imparts improved gloss and color acceptance in water borne latex paints. | |
| Strodex™ PK-95G | Ashland | Strodex™ PK-95G is the neutralized (potassium salt) form of a phosphate coester of aliphatic alcohols. It imparts improved gloss and color acceptance in waterborne latex paints. | |
| Strodex™ TH-100 | Ashland | 该表面活性剂是脂肪醇磷酸酯的中和态（钾盐）。它可为乳胶漆提供出众的稳定性，包括机械稳定性以及热和冰冻解冻稳定性。它可提高乳胶漆配方的耐浮色性能。取决于具体配方样本，它也可用作分散助剂，帮助减少颜料絮凝。 | |
| Surfadol® 331 Pigment Dispersing Agent | ACME 艾克米 | Surfadol 331用于水性系统。可降低动态表面张力，并可提高多种颜料和底材的湿润度。 | |
| Surfadol® 333 Pigment Dispersing Agent | ACME 艾克米 | Surfadol 333用于水性系统。可降低动态表面张力，并可提高多种颜料和底材的湿润度。 | |
| Surfadol® 333W Pigment Dispersing Agent | ACME 艾克米 | Surfadol® 333W is a 100% active nonionic wetting and dispersing agent for water based pigments. It can improves wetting, dispersing performance and stability for a variety of pigments. HLB value is 11-20. Silicone free, APEO free, solvent-free. | |
| Surfadol® 336 | ACME 艾克米 | Surfadol 336用于水性系统。可降低动态表面张力，并可提高多种颜料和底材的湿润度。 | |
| Surfadol® 338 | ACME 艾克米 | Surfadol 338用于水性系统。可降低动态表面张力，并可提高多种颜料和底材的湿润度。 | |
| Surfadol® 420 (2,4,7,9-Tetramethyl-5-decyne-4,7-diol ethoxylate) | ACME 艾克米 | 一种乙氧化润湿剂和分子消泡剂（100%活性液体；HLB：4）。性能类似于Surfadol 541，在水性涂料、油墨和胶粘剂体系中具有改善的操作性 | |
| Surfadol® 440 Surfactant | ACME 艾克米 | 一种乙氧化低起泡润湿剂（100%活性液体；HLB：8）。Surfadol 440表面活性剂可提供低泡沫动态和静态表面张力下降，具有改善的分散性，易添加用于水性涂料、油墨和胶粘剂体系 | |
| Surfadol® 465 Surfactant | ACME 艾克米 | 一种乙氧化低起泡润湿剂（100%活性液体；HLB：13）。Surfadol 465是一种乙氧化炔属二醇，可提供低起泡性，降低表面张力并提高在水性涂料、油墨和胶粘剂体系中的溶解性和相容性 | |
| Surfadol® 485 Surfactant | ACME 艾克米 | Surfadol 485是一种非离子型炔二醇改性表面活性剂。它专门设计用于水基系统，并能够有效降低表面张力。这款产品可以提高各种基材和颜料的润湿性，且非常适合研磨阶段使用。Surfadol 485不含硅，无溶剂，推荐用于打印油墨，柔版和凹版油墨，润版液，压敏粘合剂等。 | |
| Surfadol 485W Surfactant | ACME 艾克米 | Surfadol 485W Surfactant is a nonionic low-foam dynamic wetting agent. It is specifically for water-based systems and improves wetting of various substrates and pigments. | |
| Surfadol® 518 | ACME 艾克米 | Surfadol 518具有出色的控制泡沫性能。不会产生不相容问题。对所应用的产品性能无不良影响。 | |
| Surfadol® 520 | ACME 艾克米 | Surfadol 520是一种澄清黄色特体，用于涂料，粘合剂，乳胶浸渍，染料及颜料合成以及清洁产品 | |
| Surfadol® 532 | ACME 艾克米 | Surfadol 532是一种澄清黄色特体，用于涂料，粘合剂，乳胶浸渍，染料及颜料合成以及清洁产品 | |
| Surfadol® 532B | ACME 艾克米 | Surfadol 532B是一种非离子消泡剂（32%活性成分）。它可以有效的在水基油漆和涂料中打破气泡和微气泡。这款产品不含有机硅和APEO。 | |
| Surfadol® 541 (2,4,7,9-Tetramethyl-5-decyne-4,7-diol, TMDD) | ACME 艾克米 | 炔属二醇表面活性剂，具有多种优点，包括润湿和泡沫控制，适用于水性体系。100%活性固体 | |
| Surfadol® 541A Surfactant | ACME 艾克米 | 炔属二醇表面活性剂，具有多种优点，包括润湿和泡沫控制，适用于水性体系。50%活性液体，2-乙基己醇稀释 | |
| Surfadol® 541BC Surfactant | ACME 艾克米 | 炔属二醇表面活性剂，具有多种优点，包括润湿和泡沫控制，适用于水性体系。50%活性液体，2-丁氧基乙醇稀释 | |
| Surfadol® 541DPM Surfactant | ACME 艾克米 | 炔属二醇表面活性剂，具有多种优点，包括润湿和泡沫控制，适用于水性体系。50%活性液体，二丙二醇单甲醚稀释 | |
| Surfadol® 541E Surfactant | ACME 艾克米 | 炔属二醇表面活性剂，具有多种优点，包括润湿和泡沫控制，适用于水性体系。50%活性液体，乙二醇稀释 | |
| Surfadol® 541H Surfactant | ACME 艾克米 | 炔属二醇表面活性剂，具有多种优点，包括润湿和泡沫控制，适用于水性体系。75%活性液体，乙二醇稀释 | |
| Surfadol® 541PA Surfactant | ACME 艾克米 | 炔属二醇表面活性剂，具有多种优点，包括润湿和泡沫控制，适用于水性体系。50%活性液体，异丙醇稀释 | |
| Surfadol® 541PG Surfactant | ACME 艾克米 | 炔属二醇表面活性剂，具有多种优点，包括润湿和泡沫控制，适用于水性体系。50%活性液体，丙二醇稀释 | |
| Surfadol® 541S Surfactant | ACME 艾克米 | Surfadol® 541S is a free-flowing white powder amorphous silica with a menthol odor. It effectively reduces the surface tension, foam control, and promotes leveling to maintain stable viscosity. It is for non-water, non-solvent based coatings and other sys...展开 Surfadol® 541S is a free-flowing white powder amorphous silica with a menthol odor. It effectively reduces the surface tension, foam control, and promotes leveling to maintain stable viscosity. It is for non-water, non-solvent based coatings and other systems. Surfadol® 541S is without APEO and non-toxic. 收起 | |
| Surfadol® 550 | ACME 艾克米 | Surfadol 550是一种炔二醇表面活性剂。它可以有效地打破气泡和微泡，并提供卓越持久的泡沫控制，且对应用程序的性能无不良影响。它可以在水/乙醇系统以及以溶剂为基础的系统中使用。这款产品推荐用于涂料，粘合剂，乳胶浸渍，染料和合成颜料，以及清洁产品中。Surfadol 550的密度为0.925-0.935g/cm^3。 | |
| Surfadol® 550P | ACME 艾克米 | Surfadol 550P是一款50%活性物的非离子消泡剂。它在水基油漆和涂料中提供有效和持久的泡沫控制。这款产品不含有机硅和APEO。 | |
| V-Cap™ | Ashland | 浅黄色结晶固体，用于常规聚合生成具有更憎水特性的材料。它也可用作自由基引发UV辐射固化的活性稀释剂 | |
| V-Pyrol™ | Ashland | 透明、稳定的液体，可用作自由基引发UV辐射固化的活性稀释剂，用于无数的常规聚合和作为一种配制好的可UV辐射固化的涂料 | |
| WPCs Compatibilizer（SZ11） | Huangshan Banner Technology Co., Ltd. | WPCs Compatibilizer（SZ11）(maleic anhydride modified polyethylene) is a white pellet with high reactivity and low residual monomer and gel content. This product can be used as a bridge, of sorts, between wood, plastic and composite non-polar and polar mate...展开 WPCs Compatibilizer（SZ11）(maleic anhydride modified polyethylene) is a white pellet with high reactivity and low residual monomer and gel content. This product can be used as a bridge, of sorts, between wood, plastic and composite non-polar and polar materials to improve binding and compatibility in thermoplastic powder coatings. 收起 | |
| Gloss Lacquer Formula for Airless Spray Application (Formulation #07-1019B) | Ashland | 无气喷涂高光清漆，基于Neocryl* XK98 | |
| Gloss Parquet Lacquer (Formulation #07-1020A) | Ashland | 高光实木复合地板清漆，基于Neopac* E106氨基甲酸酯/丙烯酸共聚物 | |
| High Build Exterior Masonry Coating (Formulation #07-1040B) | Ashland | PVC 50% - Pliotec LEB 18*低渗出粘合剂外墙砖石建筑涂料。 | |
| High Gloss White Coat Paint (Formulation #07-1021B) | Ashland | PVC20％ - Synaqua*4804 醇酸树脂乳液高光白色面漆，含有AquaFlow™NLS-205和AquaFlow™NMS-450流变改性剂。 | |
| High Gloss White Top Coat - Higher Solids (Formulation #07-1022B) | Ashland | PVC20％ - Uradil* AZ785-Z52 醇酸树脂乳液高光白色面漆，含有AquaFlow™NMS-450和AquaFlow™NHS-300流变改性剂。 | |
| High Gloss White Top Coat (Formulation #07-1023B) | Ashland | PVC19％ - Primal* HG74D 丙烯酸高光白色涂料，含有AquaFlow™NMS-450和AquaFlow™NHS-350流变改性剂。 | |
| High Gloss White Top Coat (Formulation #07-1024B) | Ashland | PVC19％ - Primal* HG74D - 丙烯酸高光白色涂料，含有AquaFlow™XLS-500和AquaFlow™NHS-300流变改性剂。 | |
| High Gloss White Top Coat (Formulation #07-1025B) | Ashland | PVC20％ - Uradil* AZ785-Z52 醇酸树脂乳液高光白色面漆，含有AquaFlow™XLS-530和AquaFlow™NMS-450流变改性剂。 | |
| High Gloss White Top Coat (Formulation #07-1030B) | Ashland | 这个配方可于高光泽涂料，高光泽白色。它含AquaFlow™NMS-450，AquaFlow™NHS-350，NUOSEPT®BIC和DEXTROL®OC180。 | |
| High Gloss White Top Coat (Formulation #07-1075A) | Ashland | This PVC 20% - NeoPac PU 580 urethane alkyd emulsion high gloss white top coat features Aquaflow™ NHS-350E. | |
| Interior / Exterior Deeptone Semi Gloss Paint (Formulation #07-1018B) | Ashland | PVC43％ - Acronal* S-559 苯丙烯酸深色调半光泽涂料，含有AquaFlow™XLS-500和AquaFlow™NHS-300流变改性剂。 | |
| Interior / Exterior Semi Gloss Paint (Formulation #07-1031B) | Ashland | PVC30％ - NEOCRYL* XK-90 丙烯酸半光白色涂料，含有AquaFlow™XLS-500和AquaFlow™NHS-300流变改性剂。 | |
| Interior / Exterior Semi Matt Paint (Formulation #07-1034A) | Ashland | PVC38％ - Acronal* S559 苯乙烯丙烯酸内饰半哑光白漆，含有Natrosol™HE 3KB疏水改性的羟乙基纤维素（HMHEC）及AquaFlow™NMS-450流变改性剂。 | |
| Interior / Exterior Semi Matt Paint (Formulation #07-1035A) | Ashland | PVC38％ - Mowilith* LDM1871 醋酸乙烯酯乙烯内饰半哑光白漆，含有Natrosol™HE 3KB疏水改性的羟乙基纤维素（HMHEC）。 | |
| Interior / Exterior Semi-Gloss Paint (Formulation #07-1032B) | Ashland | PVC30％ - NEOCRYL* XK-90 丙烯酸半光白色涂料，含有AquaFlow™XLS-530和AquaFlow™NHS-350流变改性剂。 |
