UL Prospector

成功!

成功保存搜索结果
Request Sample AMICURE® DBU-E Evonik Resource Efficiency GmbH, BL Crosslinkers High-purity, electronic grade of diazabicyclo-undecene. Highly efficient tertiary amine accelerator. Used in electrical encapsulation and transfer moulding powders.
Request Sample AMICURE® UR2T Evonik Resource Efficiency GmbH, BL Crosslinkers Substitute for chlorophenyl ureas; co-curing accelerator for dicyandiamide-cured epoxy resins. Faster green strength adhesion build. Used in one-component paste and film adhesives, high-performance composites, and prepregs.
Request Sample ANCAMIDE 221-X70® Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers ANCAMIDE 221-X70® Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Ancamide 221-X70 curing agent is TETA free and supplied at 70% solids in xyle...展开 ANCAMIDE 221-X70® Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Ancamide 221-X70 curing agent is TETA free and supplied at 70% solids in xylene. Special features include good color, color stability, chemical resistance and excellent corrosion resistance properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. 收起
Request Sample ANCAMIDE 221® Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers ANCAMIDE 221® Curing Agent is a member of a series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Special features include good color, color stability, chemical resistance and excelle...展开 ANCAMIDE 221® Curing Agent is a member of a series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Special features include good color, color stability, chemical resistance and excellent corrosion resistance properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. 收起
Request Sample ANCAMIDE® 220-IPA-73 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers ANCAMIDE® 220-IPA-73 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers, and coatings for concrete.
Request Sample ANCAMIDE® 220-X-70 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers ANCAMIDE® 220-X-70 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers and coatings for concrete.
Request Sample ANCAMIDE® 400 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers ANCAMIDE® 400 Curing Agent is a unique, low viscosity reactive polyamide developed specifically for use in the curing of liquid epoxy resins. It can be used in a wide range of applications, including flooring and surface coatings, adhesives, sealant and p...展开 ANCAMIDE® 400 Curing Agent is a unique, low viscosity reactive polyamide developed specifically for use in the curing of liquid epoxy resins. It can be used in a wide range of applications, including flooring and surface coatings, adhesives, sealant and putties, castings, laminates, and cable jointing compounds. 收起
Request Sample ANCAMINE® 2489 CURING AGENT Evonik Resource Efficiency GmbH, BL Crosslinkers 改性脂环族胺,浅色、粘度低。允许更高的填料使用量或降低对稀释剂的需求量。可提供非常快速的固化和高光泽以及抗发白性能
Request Sample ANCAREZ® AR555 Waterborne Epoxy Resin Evonik Resource Efficiency GmbH, BL Crosslinkers ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to con...展开 ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to conventional solid resin dispersions. The unique nature of this product allows film formulation without high levels of coalescing solvent, which enables the formulation of low-odor, zero-VOC systems. 收起
Request Sample Amicure® CG-325G Evonik Resource Efficiency GmbH, BL Crosslinkers Amicure® CG-325G curing agent is a micronized grade of dicyandiamide containing 1.5% of an inert flow control additive to inhibit clumping and improve handling. It is designed for use as a latent curing agent for epoxy resins. Applications for this produc...展开 Amicure® CG-325G curing agent is a micronized grade of dicyandiamide containing 1.5% of an inert flow control additive to inhibit clumping and improve handling. It is designed for use as a latent curing agent for epoxy resins. Applications for this product include one-component adhesives, recreational and industrial pre-preg composites, and powder coatings. 收起
Request Sample Amicure® CG-325G Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Amicure® CG-325G curing agent is a micronized grade of dicyandiamide containing 1.5% of an inert flow control additive to inhibit clumping and improve handling. It is designed for use as a latent curing agent for epoxy resins.
Request Sample Amicure® IC-221 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Amicure® IC-221 is an amine curing agent specifically designed for polyisocyanate resins. Preferred resins of choice are standard and low viscosity HDI trimer isocyanates for a range of industrial applications. Clear and pigmented topcoats and filled self...展开 Amicure® IC-221 is an amine curing agent specifically designed for polyisocyanate resins. Preferred resins of choice are standard and low viscosity HDI trimer isocyanates for a range of industrial applications. Clear and pigmented topcoats and filled self-leveling systems based on Amicure® IC-221 support high aesthetics, UV stability and rapid property development for fast return to service. Amicure® IC-221 curing agent is free of solvents, alkyl phenol derivatives and benzyl alcohol. 收起
Request Sample Amicure® IC-321 Evonik Resource Efficiency GmbH, BL Crosslinkers Amicure® IC-321 is an curing agent specifically designed to cure under high humidity conditions with standard HDI Trimer isocyanate resins for a broad range of industrial flooring applications. Amicure® IC-321 curing agent for polyisocyanate resin is desi...展开 Amicure® IC-321 is an curing agent specifically designed to cure under high humidity conditions with standard HDI Trimer isocyanate resins for a broad range of industrial flooring applications. Amicure® IC-321 curing agent for polyisocyanate resin is designed to provide long working pot-life and high flexibility. In addition, clear and pigmented topcoats and filled self-leveling systems based on Amicure® IC-321 curing agent for polyisocyanate resin exhibit rapid property development and high aesthetics and are suitable for exterior application. 收起
Request Sample Amicure® IC133 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Amicure® IC133 is a polycarbamide curing agent for DTM C3 coatings. It is slower-curing compared to Amicure® IC166. This product is ideal for plural component spray systems.
Request Sample Amicure® IC166 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Amicure® IC166 is a polycarbamide curing agent for DTM C3 coatings. It is faster-curing compared to Amicure® IC133. This product is ideal for plural component spray systems.
Request Sample Amicure® UR7/10 Evonik Resource Efficiency GmbH, BL Crosslinkers Amicure® UR7/10 cure accelerator, a finely ground version of Amicure UR accelerator; is a substituted urea-based accelerator (1 Phenyl 3,3 dimethyl urea) for dicyandiamidecured epoxy resins. It combines excellent latency at ambient temperature with rapid ...展开 Amicure® UR7/10 cure accelerator, a finely ground version of Amicure UR accelerator; is a substituted urea-based accelerator (1 Phenyl 3,3 dimethyl urea) for dicyandiamidecured epoxy resins. It combines excellent latency at ambient temperature with rapid cure in systems heated above its activation temperature. Amicure® UR7/10 is supplied as a micropulverized crystalline solid which is easily dispersed into liquid epoxy resin. Applications for this product include one-component paste and film adhesives, heat-cure composites, and prepreg composites. 收起
Request Sample Ancamide 2634™ Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers 改性聚酰胺,设计用于双组分溶剂型环氧涂料,其中高性能和低成本是主要要求
Request Sample Ancamide® 2050 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers 聚酰胺,具有高光泽、柔韧、坚硬和抗反冲击性能。无需诱导。适用于高固体份涂料和底漆、混凝土涂料、密封剂和腻子以及泳池漆
Request Sample Ancamide® 220 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamide® 220 Curing Agent is one in a series of standard reactive polyamides for use in the curing of epoxy resins. It has been designed particularly for use in solvent-based surface coatings.
Request Sample Ancamide® 2353 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers 聚酰胺,可形成出色的高光泽涂膜,快干,无诱导时间。涂膜硬而且具有非常好的耐溶剂和耐腐蚀性能。具有聚酰胺最佳的耐化学品性能
Request Sample Ancamide® 2396 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers 改性酰胺胺,可在室温下与液体环氧树脂反应
Request Sample Ancamide® 2426 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers 不含增塑剂的酰胺胺,具有长开罐使用时间和出色的抗发白性能,出色的硬度形成和良好的耐水性试剂的能力。适用于高和100%固体份涂料和底漆
Request Sample Ancamide® 2445 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers 低粘度聚酰胺,可在低温下快速固化。低胺残留量。具有高光泽、出色的硬度和柔韧性
Request Sample Ancamide® 2652 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamide® 2652 Curing Agent is a specialpolyamide adduct designed for use with liquid epoxy resins in two-part, ambient-cure coatings specifically developed to provide long overcoatability with epoxy and alternative resin technology.
Request Sample Ancamide® 2769 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamide® 2769 curing agent is an innovative technology designed for use with liquid epoxy resin. Showing polyamide like properties it is also 100% solids, contains no plasticizer and exhibits very low viscosity. This allows for formulation of solvent fre...展开 Ancamide® 2769 curing agent is an innovative technology designed for use with liquid epoxy resin. Showing polyamide like properties it is also 100% solids, contains no plasticizer and exhibits very low viscosity. This allows for formulation of solvent free or high solids coatings with ultra low volatile organic components. 收起
Request Sample Ancamide® 350A Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamide® 350A is a member of a series of reactive polyamides developed for use in the curing of epoxy resins. It has a high imidazoline content, longer pot-life and molecular weight, and lower viscosity than Ancamide® 220 or 260A and is used primarily, b...展开 Ancamide® 350A is a member of a series of reactive polyamides developed for use in the curing of epoxy resins. It has a high imidazoline content, longer pot-life and molecular weight, and lower viscosity than Ancamide® 220 or 260A and is used primarily, but not exclusively with liquid epoxy resin. Applications for Anacamide® 350A include adhesives, sealants, putties, flexible cable jointing and high solids coatings. 收起
Request Sample Ancamide® 351A Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamide® 351A Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in coatings and adhesives applications. Special features include good color, color stability, excellent corrosion resistance and...展开 Ancamide® 351A Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in coatings and adhesives applications. Special features include good color, color stability, excellent corrosion resistance and superior adhesion properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. 收起
Request Sample Ancamide® 375A Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers ANCAMIDE™ 350A的更低粘度版本,是一种标准型高咪唑啉含量聚酰胺。适用于低VOC涂料、混凝土修补和薄泥浆以及胶粘剂
Request Sample Ancamide® 512 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamide® 512 Curing Agent is an aliphatic amidoamine curing agent designed for use with liquid epoxy resin at ambient or elevated temperatures. it can be used as the sole curing agent or in a mixture with other amine-based curing agents to adjust the cur...展开 Ancamide® 512 Curing Agent is an aliphatic amidoamine curing agent designed for use with liquid epoxy resin at ambient or elevated temperatures. it can be used as the sole curing agent or in a mixture with other amine-based curing agents to adjust the cure rate or other properties. 收起
Request Sample Ancamide® 910 Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamide® 910 curing agent is a versatile, flexible hardener designed for use with liquid epoxy resin. Its engineered chemistry provides a unique combination of properties not found in other epoxy hardeners. It delivers outstanding flexibility/peel streng...展开 Ancamide® 910 curing agent is a versatile, flexible hardener designed for use with liquid epoxy resin. Its engineered chemistry provides a unique combination of properties not found in other epoxy hardeners. It delivers outstanding flexibility/peel strength, excellent thermal shock resistance, and good electrical properties. Additional features include lower viscosity than conventional polyamides and DOT non-corrosive status. Ancamide® 910 curing agent can be used either as a sole curing agent or as a modifier. 收起
Request Sample Ancamine® 1618 Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 1618 curing agent is a low-colour, low-viscosity, modified cycloaliphatic amine intended for ambient or low-temperature curing of liquid epoxy resins. It gives high-gloss films that are resistant to a variety of chemicals. These properties make ...展开 Ancamine® 1618 curing agent is a low-colour, low-viscosity, modified cycloaliphatic amine intended for ambient or low-temperature curing of liquid epoxy resins. It gives high-gloss films that are resistant to a variety of chemicals. These properties make it ideal for formulating floorings, maintenance coatings, tank linings, and secondary containment linings. Its very low colour and good colour stability make it appropriate for clear and pastel shade coatings. 收起
Request Sample Ancamine® 2014AS Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2014AS is a modified aliphatic polyamine adduct designed for use as a latent catalyst and curing agent for liquid epoxy resins. They can also be used as accelerators for dicyandiamide (DICY). This white micronised powder is applied in one-compon...展开 Ancamine® 2014AS is a modified aliphatic polyamine adduct designed for use as a latent catalyst and curing agent for liquid epoxy resins. They can also be used as accelerators for dicyandiamide (DICY). This white micronised powder is applied in one-component adhesives and solvent free laminating. 收起
Request Sample Ancamine® 2334 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2334 Curing Agent is a modified cycloaliphatic amine curing agent designed for use with liquid epoxy resin at ambient temperature. The key benefits of formulations based on this product are excellent resistance to hot oleic acid, and good resist...展开 Ancamine® 2334 Curing Agent is a modified cycloaliphatic amine curing agent designed for use with liquid epoxy resin at ambient temperature. The key benefits of formulations based on this product are excellent resistance to hot oleic acid, and good resistance to dilute sulfuric acid and methanol. Appropriate applications include industrial flooring and chemically resistant coatings in food preparation areas. 收起
Request Sample Ancamine® 2337S Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2337S curing agent is a modified aliphatic amine designed for use as a latent curing agent for epoxy resins. Applications for this product include one-component conduction or induction heat-cure adhesives, potting, coatings, and hot-melt prepreg...展开 Ancamine® 2337S curing agent is a modified aliphatic amine designed for use as a latent curing agent for epoxy resins. Applications for this product include one-component conduction or induction heat-cure adhesives, potting, coatings, and hot-melt prepregs. This product is a light yellow powder. 收起
Request Sample Ancamine® 2712 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2712 Curing Agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). This product is free of alkylsubstituted phenol and benzyl alcohol, faci...展开 Ancamine® 2712 Curing Agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). This product is free of alkylsubstituted phenol and benzyl alcohol, facilitating zero volatile organic component coating and flooring formulations. Also, Ancamine® 2712 curing agent allows the use in emission compliant coating and flooring systems. 收起
Request Sample Ancamine® 2712 M Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine 2712M curing agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). Ancamine 2712M curing agent is free of alkylsubstituted phenol and benzy...展开 Ancamine 2712M curing agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). Ancamine 2712M curing agent is free of alkylsubstituted phenol and benzyl alcohol, facilitating zero volatile organic component coating and flooring formulations. Also, Ancamine 2712M curing agent allows the use in emission compliant coating and flooring systems. 收起
Request Sample Ancamine® 2726 Curative Video Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2726 is a modified cycloaliphatic amine that offers good color and color stability. It provides high-gloss, non-blushing films with good chemical resistance. This product is used in solvent-free and high-solids coatings, gel coats, and self-leve...展开 Ancamine® 2726 is a modified cycloaliphatic amine that offers good color and color stability. It provides high-gloss, non-blushing films with good chemical resistance. This product is used in solvent-free and high-solids coatings, gel coats, and self-leveling flooring. 收起
Request Sample Ancamine® 2735 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2735 is a modified cycloaliphatic polyamine. This low viscosity, low color curing agent is intended for ambient cure of liquid epoxy resin, but can cure resin systems down to 5 °C. Ancamine® 2735 advantages include, outstanding yellowing resist...展开 Ancamine® 2735 is a modified cycloaliphatic polyamine. This low viscosity, low color curing agent is intended for ambient cure of liquid epoxy resin, but can cure resin systems down to 5 °C. Ancamine® 2735 advantages include, outstanding yellowing resistance, low color, fast cure speed and hardness build at ambient and low temperature, low viscosity, very good chemical and mechanical resistance and good carbamation resistance Ancamine® 2735 applications may include industrial and decorative self leveling flooring, high solids and solvent free coatings. 收起
Request Sample Ancamine® 2739 Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2739 curing agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). This product is free of alkylsubstituted phenol, facilitating in low vol...展开 Ancamine® 2739 curing agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). This product is free of alkylsubstituted phenol, facilitating in low volatile organic component coating and flooring formulations and allows the use in emission compliant systems. Compared to Ancamine® 2712 curing agent, Ancamine® 2739 curing agent offers long pot-life whilst retaining cure speed and through cure and providing enhanced UV durability. 收起
Request Sample Ancamine® 2748 Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2748 curing agent is a modified cycloaliphatic amine designed for use with liquid epoxy resins in the formulation of two component epoxy coatings. This curative is intended for use in coatings that require resistance to acids, bases and solvents...展开 Ancamine® 2748 curing agent is a modified cycloaliphatic amine designed for use with liquid epoxy resins in the formulation of two component epoxy coatings. This curative is intended for use in coatings that require resistance to acids, bases and solvents in markets including waste water, secondary containment, flooring, tank coatings and other demanding applications. 收起
Request Sample Ancamine® 2749 Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2749 is a cycloaliphatic amine adduct curing agent designed for use with liquid epoxy resins. It is supplied as an amber liquid and has a viscosity of 275cPs at 25 °C.
Request Sample Ancamine® 2759 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2759 Curing Agent is a modified cycloaliphatic polyamine intended for use as an ambient curing agent for liquid epoxy resin. Systems based on Ancamine® 2759 curing agent deliver fast cure speed and high resistance to carbamation and water spotti...展开 Ancamine® 2759 Curing Agent is a modified cycloaliphatic polyamine intended for use as an ambient curing agent for liquid epoxy resin. Systems based on Ancamine® 2759 curing agent deliver fast cure speed and high resistance to carbamation and water spotting. Ancamine® 2759 curing agent can be used to formulate solvent-free topcoats or self leveling and screed floorings where high chemical resistance is required. The product is free of nonyl phenol. 收起
Request Sample Ancamine® 2765 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2765 Curing Agent is an aliphatic amine adduct. When used with liquid epoxy resins in a coating formulation, it provides very good solvent and alcohol resistance. It also imparts good mechanical properties. Ancamine® 2765 is ideal for use in sol...展开 Ancamine® 2765 Curing Agent is an aliphatic amine adduct. When used with liquid epoxy resins in a coating formulation, it provides very good solvent and alcohol resistance. It also imparts good mechanical properties. Ancamine® 2765 is ideal for use in solvent-free coatings, laminates, adhesives, and as an accelerator for other curing agents. 收起
Request Sample Ancamine® 2800 Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2800 is a modified polyamine intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application. It is free of nonyl phenol, facilitating in low volatile organic component coating and flooring formulatio...展开 Ancamine® 2800 is a modified polyamine intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application. It is free of nonyl phenol, facilitating in low volatile organic component coating and flooring formulations. 收起
Request Sample Ancamine® 2908A Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2908A Curing Agent is a low viscosity liquid accelerator designed to cure liquid epoxy resins with various anhydride systems at elevated temperatures. The combination of its liquid form and its unique chemistry offers long working time and low v...展开 Ancamine® 2908A Curing Agent is a low viscosity liquid accelerator designed to cure liquid epoxy resins with various anhydride systems at elevated temperatures. The combination of its liquid form and its unique chemistry offers long working time and low viscosity. This can enhance fabricator processing with improved fiber wetting, minimised material waste and improved overall throughput. It is recommended for use in composites’ processing, industrial electrical, and electronics applications. 收起
Request Sample Ancamine™ 2264 Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine™ 2264 curing agent is cycloaliphatic amine designed for use with liquid epoxy resins in the fabrication of industrial composites. It contains polycycloaliphatic polyamines (high functionality cycloaliphatic amines), which allows improved stiffnes...展开 Ancamine™ 2264 curing agent is cycloaliphatic amine designed for use with liquid epoxy resins in the fabrication of industrial composites. It contains polycycloaliphatic polyamines (high functionality cycloaliphatic amines), which allows improved stiffness and elevated temperature performance in cured systems, compared with cycloaliphatic diamine-cured systems. Applications for this product include filament winding, resin transfer molding, potting for tooling, electrical and general industrial applications. 收起
Request Sample Anquamine® 287 Curing Agent - Fast One-Day Flooring System on to Concrete Evonik Resource Efficiency GmbH, BL Crosslinkers Anquamine® 287 curing agent is a water-based epoxy curing agent based on a Mannich base adduct specifically developed for concrete primer applications including green concrete. It is designed for use with standard and modified liquid epoxy resins without ...展开 Anquamine® 287 curing agent is a water-based epoxy curing agent based on a Mannich base adduct specifically developed for concrete primer applications including green concrete. It is designed for use with standard and modified liquid epoxy resins without the addition of emulsifiers. Anquamine® 287 curing agent based primers exhibit excellent adhesion to concrete and penetration properties that out perform other conventional curing agent technology. The product is VOC free and supports low emission applications. 收起
Request Sample Anquamine® 287 Waterborne Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Anquamine® 287 a novel water-based epoxy curing agent designed for use in two part epoxy systems with standard liquid and modified liquid epoxy resins without the addition of emulsifiers. Its appearance is amber to greenish liquid. Anquamine® 287 based pr...展开 Anquamine® 287 a novel water-based epoxy curing agent designed for use in two part epoxy systems with standard liquid and modified liquid epoxy resins without the addition of emulsifiers. Its appearance is amber to greenish liquid. Anquamine® 287 based primers exhibit excellent adhesion to green concrete and penetration properties that outperform other water-based curing agent technology. It also can be formulated into a cementitious epoxy floor with excellent moisture permeability and thermal shock resistance. Applications can include, cementitious epoxy flooring, primer/sealer for green concrete, concrete curing compound and primer for old and new concrete. 收起
Request Sample Anquamine® 401 Evonik Resource Efficiency GmbH, BL Crosslinkers 水性固化剂,具有快速干燥时间,以及出色的硬度和良好的防腐蚀性能。可为高光泽涂膜提供出色的保光性
Request Sample Anquamine® 419 Evonik Resource Efficiency GmbH, BL Crosslinkers 水性固化剂,具有快干时间和出色的耐腐蚀和耐湿性,良好的光泽和保光性,以及对钢基材出色的附着力
Request Sample Anquamine® 721 Evonik Resource Efficiency GmbH, BL Crosslinkers Anquamine® 721 waterborne curing agent is a modified amine curing agent designed for use in waterborne epoxy coatings where cost effectiveness and high performance are key requirements. Anquamine® 721 curing agent can be formulated to low or zero VOC....展开 Anquamine® 721 waterborne curing agent is a modified amine curing agent designed for use in waterborne epoxy coatings where cost effectiveness and high performance are key requirements. Anquamine® 721 curing agent can be formulated to low or zero VOC. It offers good pot life, good dry speed, and good emulsion stability even at low solids. Cured coatings exhibit high gloss, a balance of hardness and flexibility, and very good adhesion to concrete. 收起
Request Sample Anquamine® 731 Evonik Resource Efficiency GmbH, BL Crosslinkers Anquamine® 731 is a water-based curing agent is specifically designed for a standard liquid epoxy resin. It is specifically designed for costeffective high-film build concrete coatings. It is particularly suitable for water-based self-leveling systems. ...展开 Anquamine® 731 is a water-based curing agent is specifically designed for a standard liquid epoxy resin. It is specifically designed for costeffective high-film build concrete coatings. It is particularly suitable for water-based self-leveling systems. Anquamine® 731 curing agent easily emulsifies standard liquid epoxy resins without the need for emulsifiable or pre-emulsified epoxy resins. 收起
Request Sample Anquamine® 735 Evonik Resource Efficiency GmbH, BL Crosslinkers Anquamine® 735 is a waterborne curing agent for standard liquid epoxy resin. It is specifically designed for cost effective high film build concrete coatings. It is particularly suitable for water-based self levelling systems of 1-3 mm film thickness. Fo...展开 Anquamine® 735 is a waterborne curing agent for standard liquid epoxy resin. It is specifically designed for cost effective high film build concrete coatings. It is particularly suitable for water-based self levelling systems of 1-3 mm film thickness. Formulations based on Anquamine® 735 curing agent provide highly decorative functional floors without the requirement for plasticisers or solvents. 收起
Request Sample Anquawhite™ 100 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Anquawhite™ 100 Curing Agent is a novel waterborne curing agent dispersion designed for use in ambient or heat cure two part epoxy systems. This product can be formulated with a variety of epoxy resins and waterborne epoxy dispersions while maintaining VO...展开 Anquawhite™ 100 Curing Agent is a novel waterborne curing agent dispersion designed for use in ambient or heat cure two part epoxy systems. This product can be formulated with a variety of epoxy resins and waterborne epoxy dispersions while maintaining VOC levels < 100 g/l. It can also be formulated to high solids while maintaining low viscosity. Formulations based on Anquawhite™ 100 curing agent and Ancarez™ AR 550 epoxy resin offer long pot life, fast dry, high gloss, and high water resistance at low VOC. Anquawhite™ 100 curing agent formulations also offer low yellowing, good acid and food stain resistance, and good water resistance. 收起
Request Sample EPODIL® 742 Evonik Resource Efficiency GmbH, BL Crosslinkers An epoxy resin system modifier.
Request Sample EPODIL® 747 Reactive Diluent Evonik Resource Efficiency GmbH, BL Crosslinkers EPODIL® 747 Reactive Diluent is an aliphatic glycidyl ether comparable to Epoxide 7.1 It is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain term...展开 EPODIL® 747 Reactive Diluent is an aliphatic glycidyl ether comparable to Epoxide 7.1 It is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain termination, the minimum amount necessary to achieve the desired viscosity reduction should be used. It is ideal for use in flooring, mortars, and grouts, high and 100%-solids coatings, laminates, and potting compounds. 收起
Request Sample EPODIL® 757 Reactive Diluent Evonik Resource Efficiency GmbH, BL Crosslinkers EPODIL® 757 Reactive Diluent is a technical grade of the glycidyl ether of cyclohexane dimethanol. The product is a cycloaliphatic difunctional reactive diluent used to reduce the viscosity of epoxy resin systems. It is ideal for use in laminates, potting...展开 EPODIL® 757 Reactive Diluent is a technical grade of the glycidyl ether of cyclohexane dimethanol. The product is a cycloaliphatic difunctional reactive diluent used to reduce the viscosity of epoxy resin systems. It is ideal for use in laminates, potting compounds, mortars, grouts and flooring. 收起
Request Sample EPODIL® 759 Reactive Diluent Evonik Resource Efficiency GmbH, BL Crosslinkers EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain terminati...展开 EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain termination, the minimum amount necessary to achieve the desired viscosity reduction should be used. 收起
Request Sample Epilink™ 360 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Epilink™ 360 Curing Agent is a modified polyamide curing agent designed for use with liquid epoxy resins in two-component, ambient-cure, waterborne epoxy coatings. It is supplied at 50% solids in water, allowing for the formulation of very low or zero-VOC...展开 Epilink™ 360 Curing Agent is a modified polyamide curing agent designed for use with liquid epoxy resins in two-component, ambient-cure, waterborne epoxy coatings. It is supplied at 50% solids in water, allowing for the formulation of very low or zero-VOC epoxy coatings with handling and performance properties typical of solventborne formulations. 收起
Request Sample Epodil® 748 Reactive Diluent Evonik Resource Efficiency GmbH, BL Crosslinkers Epodil® 748 Reactive Diluent is the glycidyl ether of a mixture of C12-C14 aliphatic alcohols used to reduce the viscosity of epoxy resin systems. It is a monofunctional reactive diluent, which provides excellent viscosity reduction. In addition the low l...展开 Epodil® 748 Reactive Diluent is the glycidyl ether of a mixture of C12-C14 aliphatic alcohols used to reduce the viscosity of epoxy resin systems. It is a monofunctional reactive diluent, which provides excellent viscosity reduction. In addition the low level of volatility and ability to reduce the surface tension of epoxy resins make this product a general purpose diluent. 收起
Request Sample Epodil® 749 Reactive Diluent Evonik Resource Efficiency GmbH, BL Crosslinkers Epodill® 749 Reactive Diluent is neopentyl glycol diglycidyl ether used to reduce the viscosity of epoxy resin systems. It is a difunctional reactive diluent, which provides good viscosity reduction with minimal reduction in physical properties. This prod...展开 Epodill® 749 Reactive Diluent is neopentyl glycol diglycidyl ether used to reduce the viscosity of epoxy resin systems. It is a difunctional reactive diluent, which provides good viscosity reduction with minimal reduction in physical properties. This product is applied in laminates, flooring and motars, and potting and encapsulation. 收起
Request Sample HYBRIDUR® 580 Polymer Dispersion Evonik Resource Efficiency GmbH, BL Crosslinkers HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain re...展开 HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain resistance. 收起
Request Sample Hybridur® 570 Polymer Dispersion Evonik Resource Efficiency GmbH, BL Crosslinkers 丙烯酸-氨基甲酸酯混合聚合物乳液。是常规聚氨酯乳液经济有效的替代物。具有杰出的对各种基材的附着力、柔韧性和出众的耐腐蚀性能和阻隔性能
Request Sample Hybridur® 870 Polymer Dispersion Evonik Resource Efficiency GmbH, BL Crosslinkers 不含NMP,阴离子稳定的丙烯酸-氨基甲酸酯混合聚合物乳液。它应用于自干、烤漆或交联高性能涂料中具有出色的润湿性、附着力、阻隔性和涂膜性能
Request Sample IMICURE® AMI-1 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal f...展开 IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal for use in adhesives, pre-preg composites, and encapsulation. 收起
Request Sample IMICURE® Imidazole Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good acc...展开 IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good accelerator for dicyandiamide, anhydride and phenolic curing agents. 收起
Request Sample Imicure® EMI-24 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Imicure® EMI-24 Curing Agent is 2-ethyl-4-methyl Imidazole, a high-reactivity, medium-viscosity liquid imidazole designed for use as a latent curing agent/curing accelerator for epoxy resins. It is used alone or to accelerate dicyandiamide or anhydride cu...展开 Imicure® EMI-24 Curing Agent is 2-ethyl-4-methyl Imidazole, a high-reactivity, medium-viscosity liquid imidazole designed for use as a latent curing agent/curing accelerator for epoxy resins. It is used alone or to accelerate dicyandiamide or anhydride cures. This product is applied in filament winding, electrical laminates, moulding powders, one-component adhesives, and structural adhesives. 收起
Request Sample Nourybond® 276 Adhesion Promoter Evonik Resource Efficiency GmbH, BL Crosslinkers Nourybond® 276 Adhesion Promoter is a modified polyamidoamine PVC plastisol adhesion promoter intended for use in automotive sealants and underbody coatings. It is designed to provide adhesion to electrode positions primers used in the manufacture of auto...展开 Nourybond® 276 Adhesion Promoter is a modified polyamidoamine PVC plastisol adhesion promoter intended for use in automotive sealants and underbody coatings. It is designed to provide adhesion to electrode positions primers used in the manufacture of automobiles, trucks, and buses. This product is a clear amber liquid. 收起
Request Sample Nourybond® 289 Adhesion Promoter Evonik Resource Efficiency GmbH, BL Crosslinkers 封闭型异氰酸酯PVC塑料溶胶附着力促进剂,适用于汽车密封剂,应用于可见区域和抗裂底漆
Request Sample Oxyester EP-HS 2272 Evonik Resource Efficiency GmbH, BL Crosslinkers Oxyester EP-HS 2272 is a linear polyester diol. It is a solvent-free, low viscosity polyester to formulate high solid PUR coatings.
Request Sample Oxyester T 1136 Evonik Resource Efficiency GmbH, BL Crosslinkers 聚氨酯原材料。聚酯二醇(线性),分子量约为1000。单组分或双组分PUR体系的软化剂;耐光照稳定的2组分PUR弹性体;PUR改性树脂的主链。物理形态:液态,100%。
PC-4108 Shanghai Pancai Metallic Pigment Co., Ltd. PC-4108 is a non-leafing aluminum paste pigment that carries plated silver and chrome characteristics. It has a particle size distribution of 12 microns and provides good reflectivity and surface smoothness to desired products. PC-4108 can be used in pain...展开 PC-4108 is a non-leafing aluminum paste pigment that carries plated silver and chrome characteristics. It has a particle size distribution of 12 microns and provides good reflectivity and surface smoothness to desired products. PC-4108 can be used in paint and coating applications. 收起
PC-4208 Shanghai Pancai Metallic Pigment Co., Ltd. PC-4208 is a non-leafing aluminum paste pigment that carries plated silver and chrome characteristics. It has a particle size distribution of 11 microns and provides good reflectivity and surface smoothness to desired products. PC-4208 can be used in pain...展开 PC-4208 is a non-leafing aluminum paste pigment that carries plated silver and chrome characteristics. It has a particle size distribution of 11 microns and provides good reflectivity and surface smoothness to desired products. PC-4208 can be used in paint and coating applications. 收起
PC-4308 Shanghai Pancai Metallic Pigment Co., Ltd. PC-4308 is a non-leafing aluminum paste pigment that carries plated silver and chrome characteristics. It has a particle size distribution of 9 microns and provides good reflectivity and surface smoothness to desired products. PC-4308 can be used in paint...展开 PC-4308 is a non-leafing aluminum paste pigment that carries plated silver and chrome characteristics. It has a particle size distribution of 9 microns and provides good reflectivity and surface smoothness to desired products. PC-4308 can be used in paint and coating applications. 收起
PC-4408 Shanghai Pancai Metallic Pigment Co., Ltd. PC-4408 is a non-leafing aluminum paste pigment that carries plated silver and chrome characteristics. It has a particle size distribution of 6 microns and provides good reflectivity and surface smoothness to desired products. PC-4408 can be used in paint...展开 PC-4408 is a non-leafing aluminum paste pigment that carries plated silver and chrome characteristics. It has a particle size distribution of 6 microns and provides good reflectivity and surface smoothness to desired products. PC-4408 can be used in paint and coating applications. 收起
PC-5108 Shanghai Pancai Metallic Pigment Co., Ltd. PC-5108 is a non-leafing aluminum paste pigment that carries plated silver and chrome characteristics. It has a particle size distribution of 15 microns and provides good brightness and coverage to desired products. PC-5108 can be used in high quality ind...展开 PC-5108 is a non-leafing aluminum paste pigment that carries plated silver and chrome characteristics. It has a particle size distribution of 15 microns and provides good brightness and coverage to desired products. PC-5108 can be used in high quality industrial coating applications. 收起
PC-5200 Shanghai Pancai Metallic Pigment Co., Ltd. PC-5200 is a non-leafing aluminum paste pigment that carries plated silver and chrome characteristics. It has a particle size distribution of 4 microns and provides good brightness and coverage to desired products. PC-5200 can be used in high quality indu...展开 PC-5200 is a non-leafing aluminum paste pigment that carries plated silver and chrome characteristics. It has a particle size distribution of 4 microns and provides good brightness and coverage to desired products. PC-5200 can be used in high quality industrial coating applications. 收起
PC-5208 Shanghai Pancai Metallic Pigment Co., Ltd. PC-5208 is a non-leafing aluminum paste pigment that carries plated silver and chrome characteristics. It has a particle size distribution of 12 microns and provides good brightness and coverage to desired products. PC-5208 can be used in high quality ind...展开 PC-5208 is a non-leafing aluminum paste pigment that carries plated silver and chrome characteristics. It has a particle size distribution of 12 microns and provides good brightness and coverage to desired products. PC-5208 can be used in high quality industrial coating applications. 收起
PC-5300 Shanghai Pancai Metallic Pigment Co., Ltd. PC-5300 is a non-leafing aluminum paste pigment that carries plated silver and chrome characteristics. It has a particle size distribution of 10 microns and provides good brightness and coverage to desired products. PC-5300 can be used in high quality ind...展开 PC-5300 is a non-leafing aluminum paste pigment that carries plated silver and chrome characteristics. It has a particle size distribution of 10 microns and provides good brightness and coverage to desired products. PC-5300 can be used in high quality industrial coating applications. 收起
PC-5308 Shanghai Pancai Metallic Pigment Co., Ltd. PC-5308 is a non-leafing aluminum paste pigment that carries plated silver and chrome characteristics. It has a particle size distribution of 9 microns and provides good brightness and coverage to desired products. PC-5308 can be used in high quality indu...展开 PC-5308 is a non-leafing aluminum paste pigment that carries plated silver and chrome characteristics. It has a particle size distribution of 9 microns and provides good brightness and coverage to desired products. PC-5308 can be used in high quality industrial coating applications. 收起
PC-5400 Shanghai Pancai Metallic Pigment Co., Ltd. PC-5400 is a non-leafing aluminum paste pigment that carries plated silver and chrome characteristics. It has a particle size distribution of 11 microns and provides good brightness and coverage to desired products. PC-5400 can be used in high quality ind...展开 PC-5400 is a non-leafing aluminum paste pigment that carries plated silver and chrome characteristics. It has a particle size distribution of 11 microns and provides good brightness and coverage to desired products. PC-5400 can be used in high quality industrial coating applications. 收起
PC-5800 Shanghai Pancai Metallic Pigment Co., Ltd. PC-5800 is a non-leafing aluminum paste pigment that carries plated silver and chrome characteristics. It has a particle size distribution of 8 microns and provides good brightness and coverage to desired products. PC-5800 can be used in high quality indu...展开 PC-5800 is a non-leafing aluminum paste pigment that carries plated silver and chrome characteristics. It has a particle size distribution of 8 microns and provides good brightness and coverage to desired products. PC-5800 can be used in high quality industrial coating applications. 收起
PC-7026 Shanghai Pancai Metallic Pigment Co., Ltd. PC-7026 is a non-leafing aluminum paste pigment that carries silky metallic characteristics. It has a particle size distribution of 22 microns and provides a good hiding effect. PC-7026 can be used in industrial coil coating applications.
PC-7036 Shanghai Pancai Metallic Pigment Co., Ltd. PC-7036 is a non-leafing aluminum paste pigment that carries silky metallic characteristics. It has a particle size distribution of 11 microns and provides a good hiding effect. PC-7036 can be used in industrial coil coating applications.
PC-7036A Shanghai Pancai Metallic Pigment Co., Ltd. PC-7036A is a non-leafing aluminum paste pigment that carries silky metallic characteristics. It has a particle size distribution of 9 microns and provides a good hiding effect. PC-7036A can be used in industrial coil coating applications.
PC-7066 Shanghai Pancai Metallic Pigment Co., Ltd. PC-7066 is a non-leafing aluminum paste pigment that carries silky metallic characteristics. It has a particle size distribution of 8 microns and provides a good hiding effect. PC-7066 can be used in industrial coil coating applications.
PC-8037 Shanghai Pancai Metallic Pigment Co., Ltd. PC-8037 is a non-leafing aluminum paste pigment that carries glittering silver characteristics. It provides a white, bright, and highly sparkling metallic finish effect to desired products. It has a particle size distribution of 28 microns. PC-8037 can be...展开 PC-8037 is a non-leafing aluminum paste pigment that carries glittering silver characteristics. It provides a white, bright, and highly sparkling metallic finish effect to desired products. It has a particle size distribution of 28 microns. PC-8037 can be used in interior and exterior paint and high quality industrial coating applications. 收起
PC-8065 Shanghai Pancai Metallic Pigment Co., Ltd. PC-8065 is a non-leafing aluminum paste pigment that carries glittering silver characteristics. It provides a white, bright, and highly sparkling metallic finish effect to desired products. It has a particle size distribution of 13 microns. PC-8065 can be...展开 PC-8065 is a non-leafing aluminum paste pigment that carries glittering silver characteristics. It provides a white, bright, and highly sparkling metallic finish effect to desired products. It has a particle size distribution of 13 microns. PC-8065 can be used in interior and exterior paint and high quality industrial coating applications. 收起
PC-8067 Shanghai Pancai Metallic Pigment Co., Ltd. PC-8067 is a non-leafing aluminum paste pigment that carries glittering silver characteristics. It provides a white, bright, and highly sparkling metallic finish effect to desired products. It has a particle size distribution of 13 microns. PC-8067 can be...展开 PC-8067 is a non-leafing aluminum paste pigment that carries glittering silver characteristics. It provides a white, bright, and highly sparkling metallic finish effect to desired products. It has a particle size distribution of 13 microns. PC-8067 can be used in interior and exterior paint and high quality industrial coating applications. 收起
PC-9018 Shanghai Pancai Metallic Pigment Co., Ltd. PC-9018 is a non-leafing aluminum paste pigment that carries metallic luster characteristics. It has a particle size distribution of 55 microns and provides good brightness with a distinct sparkle effect. PC-9018 can be used in high quality decorative pai...展开 PC-9018 is a non-leafing aluminum paste pigment that carries metallic luster characteristics. It has a particle size distribution of 55 microns and provides good brightness with a distinct sparkle effect. PC-9018 can be used in high quality decorative paint and coil coating applications. 收起
PC-9028 Shanghai Pancai Metallic Pigment Co., Ltd. PC-9028 is a non-leafing aluminum paste pigment that carries metallic luster characteristics. It has a particle size distribution of 40 microns and provides good brightness with a distinct sparkle effect. PC-9028 can be used in high quality decorative pai...展开 PC-9028 is a non-leafing aluminum paste pigment that carries metallic luster characteristics. It has a particle size distribution of 40 microns and provides good brightness with a distinct sparkle effect. PC-9028 can be used in high quality decorative paint and coil coating applications. 收起
PC-9038 Shanghai Pancai Metallic Pigment Co., Ltd. PC-9038 is a non-leafing aluminum paste pigment that carries metallic luster characteristics. It has a particle size distribution of 30 microns and provides good brightness with a distinct sparkle effect. PC-9038 can be used in high quality decorative pai...展开 PC-9038 is a non-leafing aluminum paste pigment that carries metallic luster characteristics. It has a particle size distribution of 30 microns and provides good brightness with a distinct sparkle effect. PC-9038 can be used in high quality decorative paint and coil coating applications. 收起
PC-9048 Shanghai Pancai Metallic Pigment Co., Ltd. PC-9048 is a non-leafing aluminum paste pigment that carries metallic luster characteristics. It has a particle size distribution of 15 microns and provides good brightness with a distinct sparkle effect. PC-9048 can be used in high quality decorative pai...展开 PC-9048 is a non-leafing aluminum paste pigment that carries metallic luster characteristics. It has a particle size distribution of 15 microns and provides good brightness with a distinct sparkle effect. PC-9048 can be used in high quality decorative paint and coil coating applications. 收起
PC-9060 Shanghai Pancai Metallic Pigment Co., Ltd. PC-9060 is a non-leafing aluminum paste pigment that carries metallic luster characteristics. It has a particle size distribution of 60 microns and provides good brightness with a distinct sparkle effect. PC-9060 can be used in high quality decorative pai...展开 PC-9060 is a non-leafing aluminum paste pigment that carries metallic luster characteristics. It has a particle size distribution of 60 microns and provides good brightness with a distinct sparkle effect. PC-9060 can be used in high quality decorative paint and coil coating applications. 收起
PC-9078 Shanghai Pancai Metallic Pigment Co., Ltd. PC-9078 is a non-leafing aluminum paste pigment that carries metallic luster characteristics. It has a particle size distribution of 12 microns and provides good brightness with a distinct sparkle effect. PC-9078 can be used in high quality decorative pai...展开 PC-9078 is a non-leafing aluminum paste pigment that carries metallic luster characteristics. It has a particle size distribution of 12 microns and provides good brightness with a distinct sparkle effect. PC-9078 can be used in high quality decorative paint and coil coating applications. 收起
PC-9088 Shanghai Pancai Metallic Pigment Co., Ltd. PC-9088 is a non-leafing aluminum paste pigment that carries plated silver and chrome characteristics. It has a particle size distribution of 15 microns and provides good opacity and brightness to desired products. PC-9088 can be used in automotive coatin...展开 PC-9088 is a non-leafing aluminum paste pigment that carries plated silver and chrome characteristics. It has a particle size distribution of 15 microns and provides good opacity and brightness to desired products. PC-9088 can be used in automotive coating systems and all kinds of metal effect coatings. 收起
PC-9188 Shanghai Pancai Metallic Pigment Co., Ltd. PC-9188 is a non-leafing aluminum paste pigment that carries plated silver and chrome characteristics. It has a particle size distribution of 12 microns and provides good opacity and brightness to desired products. PC-9188 can be used in automotive coatin...展开 PC-9188 is a non-leafing aluminum paste pigment that carries plated silver and chrome characteristics. It has a particle size distribution of 12 microns and provides good opacity and brightness to desired products. PC-9188 can be used in automotive coating systems and all kinds of metal effect coatings. 收起
PC-9198A Shanghai Pancai Metallic Pigment Co., Ltd. PC-9198A is a non-leafing aluminum paste pigment that carries metallic luster characteristics. It has a particle size distribution of 22 microns and provides good brightness with a distinct sparkle effect. PC-9198A can be used in high quality decorative p...展开 PC-9198A is a non-leafing aluminum paste pigment that carries metallic luster characteristics. It has a particle size distribution of 22 microns and provides good brightness with a distinct sparkle effect. PC-9198A can be used in high quality decorative paint and coil coating applications. 收起
PC-9198C Shanghai Pancai Metallic Pigment Co., Ltd. PC-9198C is a non-leafing aluminum paste pigment that carries metallic luster characteristics. It has a particle size distribution of 31 microns and provides good brightness with a distinct sparkle effect. PC-9198C can be used in high quality decorative p...展开 PC-9198C is a non-leafing aluminum paste pigment that carries metallic luster characteristics. It has a particle size distribution of 31 microns and provides good brightness with a distinct sparkle effect. PC-9198C can be used in high quality decorative paint and coil coating applications. 收起
PC-9288 Shanghai Pancai Metallic Pigment Co., Ltd. PC-9288 is a non-leafing aluminum paste pigment that carries plated silver and chrome characteristics. It has a particle size distribution of 10 microns and provides good opacity and brightness to desired products. PC-9288 can be used in automotive coatin...展开 PC-9288 is a non-leafing aluminum paste pigment that carries plated silver and chrome characteristics. It has a particle size distribution of 10 microns and provides good opacity and brightness to desired products. PC-9288 can be used in automotive coating systems and all kinds of metal effect coatings. 收起