| AEPD® VOX 1000 | ANGUS Chemical Company 安格斯化学公司 | 一个新的多官能团添加剂，用于低气味，零VOC户内水性油漆。它具有非常温和的气味，高沸点和低蒸汽压。这些特点使之成为需要符合EU directive 2004/42/EC法规的油漆生产商一个理想的配方工具 | |
| ALKATERGE®-T | ANGUS Chemical Company 安格斯化学公司 | ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emu...展开 ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emulsifier. At ordinary room temperature, ALKATERGE®-T is a waxy solid which is highly soluble in aromatic hydrocarbons and lower alcohols or ketones, moderately soluble in aliphatic hydrocarbons, and miscible with most vegetable oils. In its liquid state, ALKATERGE®-T is miscible with almost all organic liquids. ALKATERGE®-T is useful as a surface active agent which is indicated by the fact that 0.1% in mineral oil reduces the interfacial surface tension against water approximately 95%, or to less than 2 dynes/cm. 收起 | |
| AMP® | ANGUS Chemical Company 安格斯化学公司 | 这是一种无色，低粘度流体，大量用于金属加工流体，涂料，锅炉水体系和个人护理等领域。它可用作中和树脂的胺，协同分散剂，脱甲醛剂，腐蚀抑制剂以及作为合成的原料。 | |
| AMP-95® | ANGUS Chemical Company 安格斯化学公司 | 被普遍认为是一种用于所有类型的乳胶漆的多功能添加剂。 | |
| AVANTANE® PA 4000 | ANGUS Chemical Company 安格斯化学公司 | 一种专门设计用于满足溶剂型轮转凹印和柔印印刷性能要求的添加剂。 | |
| BT-B100 CMIT | BioTio Group | BT-B100 CMIT is a colorless to amber liquid that has a specific gravity of 1.26-1.32 and a pH value of 1.0-4.0. This product is most commonly used as a preservative in paints, resin emulsions, oil-water emulsions, and coating applications. | |
| BT-B100 MIT | BioTio Group | BT-B100 MIT is a greenish liquid that has a specific gravity of 1.10-1.20 and a pH value of 2.0-5.0. This product is most commonly used as a preservative in paints, resin emulsions, oil-water emulsions, and coating applications. | |
| BT-B101 BRONOPOL | BioTio Group | BT-B101 BRONOPOL is a white crystalline powder that has a melting point of 126-131°C and a pH value of 5.0-7.0. This product is most commonly used as a broad-spectrum antimicrobial agent in coatings, paints, inks, and adhesive applications. | |
| BT-B102 DBNPA | BioTio Group | BT-B102 DBNPA is a white crystalline powder that has a moisture content of ≤0.5% and a pH value of 4.0-6.0. This product is most commonly used as a biocide and preservative in paint applications. | |
| BT-B103 MIT | BioTio Group | BT-B103 MIT is a colorless to amber liquid that has a specific gravity of ≥1.10 and a pH value of 5.0-7.0. This product is most commonly used as a biocide and preservative in coatings, paints, resin emulsions, and oil-water emulsion applications. | |
| BT-B104 IPBC | BioTio Group | BT-B104 IPBC is a white crystalline powder that has a melting point of 65-68°C and a moisture content of ≤0.10%. This product is most commonly used as a highly effective fungicide in coatings and paint applications. | |
| BT-B105 BIT | BioTio Group | BT-B105 BIT is a white to light yellow powder that has a melting point of 155-158°C and a moisture content of ≤15%. This product is most commonly used as a biocide and preservative in coatings, paints, resin emulsions, and oil water emulsion applications. | |
| BT-B106 OIT | BioTio Group | BT-B106 OIT is an amber liquid that has a specific gravity of ≤1.1% and a moisture content of <0.5%. This product is most commonly used as a biocide and preservative in coatings, paints, resin emulsions, and oil water emulsion applications. | |
| BT-B107 DCOIT | BioTio Group | BT-B107 DCOIT is a white crystalline powder that has a melting point of 42.2-42.8°C and a moisture content of ≤0.10%. This product is most commonly used to provide broad-spectrum protection against degradation, discoloration and defacement caused by mold,...展开 BT-B107 DCOIT is a white crystalline powder that has a melting point of 42.2-42.8°C and a moisture content of ≤0.10%. This product is most commonly used to provide broad-spectrum protection against degradation, discoloration and defacement caused by mold, mildew and algae. It can be used in antifouling paint and other coatings. 收起 | |
| BT-B110 PCMC | BioTio Group | BT-B110 PCMC is a white to off-white crystalline powder that has a melting point of 114-116°C and a moisture content of <2.0%. This product is most commonly used as an antiseptic or antifungal agent in paint applications. | |
| BT-B112 ZPT | BioTio Group | BT-B112 ZPT is a white to off-white powder that has a pH value of 6.5-8.5 and a content/assay of ≥96%. This product is most commonly used as an antibacterial agent in coatings, paints, and adhesives. | |
| BT-B115 BBIT | BioTio Group | BT-B115 BBIT is a light pink, clear liquid that has a pH value of 6.5-8.0 and a density of 1.17 g/cm3. This product is most commonly used as a biocide and preservative in coatings, paints, resin emulsions, and oil water emulsion applications. | |
| BT-B117 DBDCB | BioTio Group | BT-B117 DBDCB is a white crystalline powder that has a melting point of 50.0-54.5°C and a content/assay of ≥99%. This product is most commonly used as a preservative in coatings. | |
| BT-IN603 DTSA | BioTio Group | BT-IN603 DTSA is an off-white to light yellow powder that has a melting point of 280-290°C and a moisture content of ≤0.10%. This product is most commonly used as a chemical intermediate in dyes and biocides. | |
| BT-IN604 DCPI | BioTio Group | BT-IN604 DCPI is a white crystalline powder that has a content/assay of ≥98% and other isocyanate content of ≤1.0%. This product is most commonly used as an intermediate for the production of dyes. | |
| DMAMP-80® | ANGUS Chemical Company 安格斯化学公司 | DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wet...展开 DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wettability and stability. This product is recommended for use as an emulsifying agent, corrosion inhibitor, resin solubilizer, catalyst, additive, and synthesis agent. 收起 | |
| FLEXITANE® CA 6000 | ANGUS Chemical Company 安格斯化学公司 | 一种经过改进的万能专业涂料助剂，是一种有效的溶液，能够满足涂料配方的要求，减少特殊助剂的用量。 | |
| Leafing Aluminum Paste BT-AP400 | BioTio Group | Leafing Aluminum Paste BT-AP400 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥65%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展开 Leafing Aluminum Paste BT-AP400 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥65%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP401 | BioTio Group | Leafing Aluminum Paste BT-AP401 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥75%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展开 Leafing Aluminum Paste BT-AP401 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥75%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP402 | BioTio Group | Leafing Aluminum Paste BT-AP402 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展开 Leafing Aluminum Paste BT-AP402 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP403 | BioTio Group | Leafing Aluminum Paste BT-AP403 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥82%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展开 Leafing Aluminum Paste BT-AP403 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥82%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP404 | BioTio Group | Leafing Aluminum Paste BT-AP404 is a high pure aluminum powder that has a pigment content of 73±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展开 Leafing Aluminum Paste BT-AP404 is a high pure aluminum powder that has a pigment content of 73±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| LITHOPONE BT-IN600 | BioTio Group | LITHOPONE BT-IN600 is a white powder with a zinc sulfide content of ≥28% and a pH value of 7.2. This product is most commonly used in printing inks, marking paints, and coating applications. | |
| NIKANE® MS 3000 | ANGUS Chemical Company 安格斯化学公司 | 一种性能独特的多功能溶剂，用于构成多种工业保养涂料体系中的溶剂型还原剂和冲淡剂。 | |
| NIKANE® MS 5000 | ANGUS Chemical Company 安格斯化学公司 | 一种多功能溶剂，在溶剂型体系中有独特的性能。不但能够轻易地溶解各种材料，而且能够赋予溶解液以特性，因此得到了广泛的应用。 | |
| Non-Leafing Aluminum Paste BT-AP110 | BioTio Group | Non-Leafing Aluminum Paste BT-AP110 is a high pure aluminum powder that has a pigment content of 60±2% and an average particle size of 15μm. This product is most commonly used in marine paints, decorative and aerosol finishes, and coil coatings. | |
| Non-Leafing Aluminum Paste BT-AP120 | BioTio Group | Non-Leafing Aluminum Paste BT-AP120 is a high pure aluminum powder that has a pigment content of 60±2% and an average particle size of 15μm. This product is most commonly used in marine paints, decorative and aerosol finishes, and coil coatings. | |
| Non-Leafing Aluminum Paste BT-AP130 | BioTio Group | Non-Leafing Aluminum Paste BT-AP130 is a high pure aluminum powder that has a pigment content of 62±2% and an average particle size of 16μm. This product is most commonly used in marine paints, decorative and aerosol finishes, and coil coatings. | |
| Non-Leafing Aluminum Paste BT-AP140 | BioTio Group | Non-Leafing Aluminum Paste BT-AP140 is a high pure aluminum powder that has a pigment content of 62±2% and an average particle size of 7μm. This product is most commonly used in marine paints, decorative and aerosol finishes, and coil coatings. | |
| Precipitated Barium Sulfate BT-IN601 | BioTio Group | Precipitated Barium Sulfate BT-IN601 is a white powder with a barium sulfate content of 98% and a maximum whiteness of 93. This product is most commonly used as a filler in printing ink, paint, surface coating, coated art paper, and dye applications. | |
| Sodium Alginate BT-IN607 | BioTio Group | Sodium Alginate BT-IN607 is a 40-mesh sized, light yellow powder that has a pH value of 6.0-7.0. This product is most commonly used as a thickener in reactive dyestuff, textile screen-printing, and carpet jet-printing applications. | |
| Synthetic Red Iron Oxide 445 | Tata Pigments Ltd | Synthetic Red Iron Oxide 445 is a red colored highly concentrated dry powder pigment with volatile Matter <0.5% at 100±5˚c and Oil Absorption 25-30. It is used in paints, polishing rouge, and other applications. | |
| Synthetic Red Iron Oxide 446 | Tata Pigments Ltd | Synthetic Red Iron Oxide 446 is a red colored highly concentrated dry powder pigment with volatile Matter <0.5% at 100±5˚c and Oil Absorption 20-25. It is used in paints, polishing rouge, and other applications. | |
| Synthetic Red Iron Oxide 449 | Tata Pigments Ltd | Synthetic Red Iron Oxide 449 is a red colored highly concentrated dry powder pigment with volatile Matter <0.5% at 100±5˚c and Oil Absorption 8-13. It is used in paints, polishing rouge, and other applications. | |
| Synthetic Red Iron Oxide 473 | Tata Pigments Ltd | Synthetic Red Iron Oxide 473 is a red colored highly concentrated dry powder pigment with volatile Matter <0.5% at 100±5˚c and Oil Absorption 15-20. It is used in paints, polishing rouge, and other applications. | |
| Synthetic Red Iron Oxide Brilliant Red | Tata Pigments Ltd | Synthetic Red Iron Oxide Brilliant Red is a red colored highly concentrated dry powder pigment with volatile Matter <0.5% at 100±5˚c and Oil Absorption 25-30. It is used in paints, polishing rouge, and other applications. | |
| Synthetic Red Iron Oxide Orange Oxide | Tata Pigments Ltd | Synthetic Red Iron Oxide Orange Oxide is a red and orange colored, highly concentrated dry powder pigment with volatile Matter <0.5% at 100±5˚c and Oil Absorption 30-35. It is used in paints, polishing rouge, and other applications. | |
| Synthetic Red Iron Oxide Popular Red Oxide | Tata Pigments Ltd | Synthetic Red Iron Oxide Popular Red Oxide is a red colored highly concentrated dry powder pigment with volatile Matter <0.5% at 100±5˚c and Oil Absorption 20-25. It is used in paints, polishing rouge, and other applications. | |
| Synthetic Red Iron Oxide Red Excel-E | Tata Pigments Ltd | Synthetic Red Iron Oxide Red Excel-E is a red colored highly concentrated dry powder pigment with volatile Matter <1.0% at 100±5˚c and Oil Absorption 20-25. It is used in paints, polishing rouge, and other applications. | |
| Synthetic Red Iron Oxide Red Excel-P | Tata Pigments Ltd | Synthetic Red Iron Oxide Red Excel-P is a red colored highly concentrated dry powder pigment with volatile Matter <0.5% at 100±5˚c and Oil Absorption 20-25. It is used in paints, polishing rouge, and other applications. | |
| Synthetic Red Iron Oxide Red Excel-S | Tata Pigments Ltd | Synthetic Red Iron Oxide Red Excel-S is a red colored highly concentrated dry powder pigment with volatile Matter <1.0% at 100±5˚c and Oil Absorption 25-30. It is used in paints, polishing rouge, and other applications. | |
| Synthetic Red Iron Oxide SFO-A | Tata Pigments Ltd | Synthetic Red Iron Oxide SFO-A is a red colored highly concentrated dry powder pigment with volatile Matter <1.5% at 100±5˚c and Oil Absorption 15-20. It is used in paints, polishing rouge, and other applications. | |
| Synthetic Red Iron Oxide SFO-B | Tata Pigments Ltd | Synthetic Red Iron Oxide SFO-B is a red colored highly concentrated dry powder pigment with volatile Matter <1.0% at 100±5˚c and Oil Absorption 15-20. It is used in paints, polishing rouge, and other applications. | |
| Synthetic Red Iron Oxide T-110 | Tata Pigments Ltd | Synthetic Red Iron Oxide T-110 is a red colored highly concentrated dry powder pigment with volatile Matter <0.25% at 100±5˚c and Oil Absorption 25-30. It is used in paints, polishing rouge, and other applications. | |
| Synthetic Red Iron Oxide T-130 | Tata Pigments Ltd | Synthetic Red Iron Oxide T-130 is a red colored highly concentrated dry powder pigment with volatile Matter <0.5% at 100±5˚c and Oil Absorption 25-30. It is used in paints, polishing rouge, and other applications. | |
| Synthetic Red Iron Oxide Tata Gulf | Tata Pigments Ltd | Synthetic Red Iron Oxide Tata Gulf is a red colored highly concentrated dry powder pigment with volatile Matter <1.0% at 100±5˚c and Oil Absorption 15-20. It is used in paints, polishing rouge, and other applications. | |
| Synthetic Red Iron Oxide Yellow Iron Oxide | Tata Pigments Ltd | Synthetic Red Iron Oxide Yellow Iron Oxide is a red and yellow colored highly concentrated dry powder pigment with volatile Matter <0.5% at 100±5˚c and Oil Absorption 40-45. It is used in paints, polishing rouge, and other applications. | |
| Titanium Dioxide Anatase BT-A10 | BioTio Group | Titanium Dioxide Anatase BT-A10 is a white powder that has a titanium dioxide content of ≤93% and a pH value of 6.5-8.0. This product is most commonly used in road marking and exterior paint applications. | |
| Titanium Dioxide Anatase BT-A101 | BioTio Group | Titanium Dioxide Anatase BT-A101 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.5-8.0. This product is most commonly used in road marking and exterior paint applications. | |
| Titanium Dioxide Anatase BT-A102 | BioTio Group | Titanium Dioxide Anatase BT-A102 is a white powder that has a titanium dioxide content of ≥98% and a pH value of 6.5-8.0. This product is most commonly used in road marking and exterior paint applications. | |
| Titanium Dioxide Anatase BT-A11 | BioTio Group | Titanium Dioxide Anatase BT-A11 is a white powder that has a titanium dioxide content of ≤93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Anatase BT-A113 | BioTio Group | Titanium Dioxide Anatase BT-A113 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Anatase BT-A114 | BioTio Group | Titanium Dioxide Anatase BT-A114 is a white powder that has a titanium dioxide content of ≥98% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Anatase BT-A12 | BioTio Group | Titanium Dioxide Anatase BT-A12 is a white powder that has a titanium dioxide content of ≤93% and a pH value of 6.5-8.0. This product is most commonly used in latex paint applications. | |
| Titanium Dioxide Anatase BT-A125 | BioTio Group | Titanium Dioxide Anatase BT-A125 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.5-8.0. This product is most commonly used in latex paint applications. | |
| Titanium Dioxide Anatase BT-A126 | BioTio Group | Titanium Dioxide Anatase BT-A126 is a white powder that has a titanium dioxide content of ≥98% and a pH value of 6.5-8.0. This product is most commonly used in latex paint applications. | |
| Titanium Dioxide Rutile BT-R20 | BioTio Group | Titanium Dioxide Rutile BT-R20 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in latex paint applications. | |
| Titanium Dioxide Rutile BT-R201 | BioTio Group | Titanium Dioxide Rutile BT-R201 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in latex paint applications. | |
| Titanium Dioxide Rutile BT-R202 | BioTio Group | Titanium Dioxide Rutile BT-R202 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.5-8.0. This product is most commonly used in latex paint applications. | |
| Titanium Dioxide Rutile BT-R21 | BioTio Group | Titanium Dioxide Rutile BT-R21 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in exterior paints and traffic marking applications. | |
| Titanium Dioxide Rutile BT-R213 | BioTio Group | Titanium Dioxide Rutile BT-R213 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior paints and traffic marking applications. | |
| Titanium Dioxide Rutile BT-R214 | BioTio Group | Titanium Dioxide Rutile BT-R214 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior paints and traffic marking applications. | |
| Titanium Dioxide Rutile BT-R22 | BioTio Group | Titanium Dioxide Rutile BT-R22 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink appl...展开 Titanium Dioxide Rutile BT-R22 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Titanium Dioxide Rutile BT-R225 | BioTio Group | Titanium Dioxide Rutile BT-R225 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink app...展开 Titanium Dioxide Rutile BT-R225 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Titanium Dioxide Rutile BT-R226 | BioTio Group | Titanium Dioxide Rutile BT-R226 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.0-8.5. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink app...展开 Titanium Dioxide Rutile BT-R226 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.0-8.5. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| ZOLDINE® MS-PLUS | ANGUS Chemical Company 安格斯化学公司 | 快速反应、低黏度呃唑烷基湿气净化剂，用于聚氨酯涂料、密封剂和弹性体。 |
