MARBLEWHITE® MW200 | Specialty Minerals | MARBLEWHITE® MW200 is a limestone product which is a high purity calcium carbonate. This product has an oil absorption of 12 and a bulk density of 0.8 g/cc. MARBLEWHITE® MW200 provides brightness and controlled particle size to paints and coatings. | |
MARBLEWHITE® MW300 | Specialty Minerals | MARBLEWHITE® MW300 is a limestone product which is a high purity calcium carbonate. This product has an oil absorption of 13 and a bulk density of 0.77 g/cc. MARBLEWHITE® MW300 provides brightness and controlled particle size to paints and coatings. | |
MARBLEWHITE® MW325 | Specialty Minerals | MARBLEWHITE® MW325 is a limestone product which is a high purity calcium carbonate. This product has an oil absorption of 15 and a bulk density of 0.72 g/cc. MARBLEWHITE® MW325 provides brightness and controlled particle size to paints and coatings. | |
MICROTALC ® 50-26 | Specialty Minerals | MICROTALC® 50-26 is a general purpose talc product which has a median particle size of 8 microns. This product has a pH value of 8.8 and a density of 2.8. MICROTALC® 50-26 is used in sealants, caulks, joint compounds, spackles, and texture coats. | |
MICROTALC ® 70-22 | Specialty Minerals | MICROTALC ® 70-22 is a general purpose talc product which has a median particle size of 7 microns. This product has a dry brightness or between 76 and 85 and a bulk density of 27 pounds/ft2. MICROTALC ® 70-22 is used in sealants, caulks, joint compounds, ...展开 MICROTALC ® 70-22 is a general purpose talc product which has a median particle size of 7 microns. This product has a dry brightness or between 76 and 85 and a bulk density of 27 pounds/ft2. MICROTALC ® 70-22 is used in sealants, caulks, joint compounds, spackles, and texture coats. 收起 | |
Middle Chrome Yellow | Hangzhou Hongyan Pigment Chemical Co., Ltd. | Middle Chrome Yellow is a bright yellow pigment. This product is most commonly used in offset ink and industrial paint applications. It has a heat resistance of 180°C and a pH value of 6.5-7.5. | |
MSN-002 | Tayca Corporation | MSN-002 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MSN-003 | Tayca Corporation | MSN-003 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MSN-007 | Tayca Corporation | MSN-007 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MSP-001 | Tayca Corporation | MSP-001 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MSP-005 | Tayca Corporation | MSP-005 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MSP-009 | Tayca Corporation | MSP-009 is a cationic silica dioxide with an average primary particle size of 80 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MSP-012 | Tayca Corporation | MSP-012 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MT-01 | Tayca Corporation | MT-01 is a micro titanium dioxide (10nm) that contains aluminum and stearic acid and can be used in pigments, paints and inks to provide water repellency, transparency and dispersibility. | |
MT-05 | Tayca Corporation | MT-05 is a micro titanium dioxide (10nm) that contains aluminum and silicon and can be used in pigments, paints and inks to provide water repellency, transparency and low activity. | |
MT-100AQ | Tayca Corporation | MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints,...展开 MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-100HD | Tayca Corporation | MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-100S | Tayca Corporation | MT-100S is a micro titanium dioxide (15nm) that contains aluminum and lauric acid and can be used in pigments, paints and inks to provide water repellency, lipophilic characteristics and affinity with resin. | |
MT-100SA | Tayca Corporation | MT-100SA is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electr...展开 MT-100SA is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-100WP | Tayca Corporation | MT-100WP is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon. It exhibits good water affinity, compatibility with water-soluble thickening agents and dispersibility in applications such...展开 MT-100WP is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon. It exhibits good water affinity, compatibility with water-soluble thickening agents and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-100Z | Tayca Corporation | MT-100Z is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and stearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks an...展开 MT-100Z is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and stearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-10EX | Tayca Corporation | MT-10EX is a micro titanium dioxide (10nm) that contains aluminum and isostearic acid and can be used in pigments, paints and inks to provide transparency, dispersibility and low viscosity when dispersed in oil phase. | |
MT-150A | Tayca Corporation | MT-150A is an unprocessed titanium dioxide with an average primary particle size of 15 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
MT-150EX | Tayca Corporation | MT-150EX is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and isostearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, ink...展开 MT-150EX is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and isostearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-150W | Tayca Corporation | MT-150W is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with sodium metaphosphate. It exhibits good transparency and dispersibility in applications such as paints, inks and electrophotography. | |
MT-300HD | Tayca Corporation | MT-300HD is a micro-fine titanium dioxide with an average primary particle size of 25 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-300HD is a micro-fine titanium dioxide with an average primary particle size of 25 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-500B | Tayca Corporation | MT-500B is an unprocessed titanium dioxide with an average primary particle size of 35 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
MT-500HD | Tayca Corporation | MT-500HD is a micro-fine titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-500HD is a micro-fine titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-500SA | Tayca Corporation | MT-500SA is a titanium dioxide with an average primary particle size of 35 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in pa...展开 MT-500SA is a titanium dioxide with an average primary particle size of 35 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
MT-500SAS | Tayca Corporation | MT-500SAS is a titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with silicone oil, silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance and water repellency. It is ...展开 MT-500SAS is a titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with silicone oil, silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance and water repellency. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
MT-600B | Tayca Corporation | MT-600B is an unprocessed titanium dioxide with an average primary particle size of 50 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
MT-600SA | Tayca Corporation | MT-600SA is a titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in pa...展开 MT-600SA is a titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
MT-700B | Tayca Corporation | MT-700B is an unprocessed titanium dioxide with an average primary particle size of 80 nm. It is suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency is desired. | |
MT-700HD | Tayca Corporation | MT-700HD is a micro-fine titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-700HD is a micro-fine titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MTY-02 | Tayca Corporation | MTY-02 is a micro-fine titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good transparency, water repellency and dispersibility in applications such as paints,...展开 MTY-02 is a micro-fine titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MTY-110M3S | Tayca Corporation | MTY-110M3S is a micro-fine, low viscosity titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good water repellency, transparency and dispersibility in applicati...展开 MTY-110M3S is a micro-fine, low viscosity titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good water repellency, transparency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MTY-150ANO | Tayca Corporation | MTY-150ANO is a cationic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MTY-150AO | Tayca Corporation | MTY-150AO is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MTY-150FI | Tayca Corporation | MTY-150FI is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MTY-150IB | Tayca Corporation | MTY-150IB is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MTY-700BS | Tayca Corporation | MTY-700BS is a titanium dioxide with an average primary particle size of 80 nm. It is surface treated with silicone oil, making it suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency ...展开 MTY-700BS is a titanium dioxide with an average primary particle size of 80 nm. It is surface treated with silicone oil, making it suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency and water repellency is desired. 收起 | |
Multifex-MM® Uncoated | Specialty Minerals | Multifex-MM® Uncoated is and ultra-fine calcium carbonate which has a rhombic particle shape. This product has an oil absorption of 26 and a specific gravity of 2.71. Multifex-MM® Uncoated is used in paints, coatings, adhesives, and sealants. | |
MZ-300 | Tayca Corporation | MZ-300 is an untreated micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good transparency and UV-A shielding properties in formulations for paints and inks. | |
MZ-306X | Tayca Corporation | MZ-306X is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good transparency, water repellency, dispersibility and UV-A shielding properties in formulations for paints and inks. | |
MZ-500 | Tayca Corporation | MZ-500 is an untreated micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency in formulations for paints and inks. | |
MZ-506X | Tayca Corporation | MZ-506X is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits good water repellency, dispersal and transparency properties in formulations for paints and inks. | |
MZ-510HPSX | Tayca Corporation | MZ-510HPSX is a silica and silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency and good light resistance in formulations for paints and inks. | |
MZY-303S | Tayca Corporation | MZY-303S is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good water repellency, transparency and UV-A shielding properties in formulations for paints and inks. | |
MZY-505S | Tayca Corporation | MZY-505S is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits good water repellency and transparency properties in formulations for paints and inks. | |
MZY-510M3S | Tayca Corporation | MZY-510M3S is a low viscosity, silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency in formulations for paints and inks. | |
Oil Orange | Hangzhou Hongyan Pigment Chemical Co., Ltd. | Oil Orange is a reddish yellow pigment. This product is most commonly used for industrial paint applications. It has a heat resistance of 120°C and a pH value of 7-8. | |
Oil Red | Hangzhou Hongyan Pigment Chemical Co., Ltd. | Oil Red is a red pigment. This product is most commonly used in industrial paint applications. It has a heat resistance of 120°C and a pH value of 7-8. | |
Permanent Yellow 5GX | Hangzhou Hongyan Pigment Chemical Co., Ltd. | Permanent Yellow 5GX is a bright yellow pigment. This product can be used in industrial paint, water based paint, and water based ink applications. It has a heat resistance of 180°C and a pH value of 6-7. | |
Permanent Yellow 5GX-S | Hangzhou Hongyan Pigment Chemical Co., Ltd. | Permanent Yellow 5GX-S is a bright yellow pigment. This product is most commonly used in solvent based ink and water based paint applications. It has a heat resistance of 180°C and a pH value of 6-7. | |
Permanent Yellow HR-A | Hangzhou Hongyan Pigment Chemical Co., Ltd. | Permanent Yellow HR-A is a transparent, reddish yellow pigment. This product is commonly used in industrial paint, water based ink, and offset ink applications. It has a heat resistance of 200°C and a pH value of 6-7. | |
Permanent Yellow HR-B | Hangzhou Hongyan Pigment Chemical Co., Ltd. | Permanent Yellow HR-B is a reddish yellow pigment. This product is most commonly used for industrial paint applications. It has a heat resistance of 200°C and a pH value of 6-7. | |
Permanent Yellow RN | Hangzhou Hongyan Pigment Chemical Co., Ltd. | Permanent Yellow RN is a reddish yellow pigment. This product is most commonly used for industrial paint applications. It has a heat resistance of 150°C and a pH value of 6-7. | |
SERICRON® 2M | Specialty Minerals | SERICRON® 2M is a talc product which has a high chemical resistance. This product has an oil absorption of 22 and a bulking value of 23.3. SERICRON® 2M is used in construction products such as joint compound, adhesives, sealants, putties, and caulks. | |
SERICRON® 3M | Specialty Minerals | SERICRON® 3M is a talc product which has a high chemical resistance. This product has an oil absorption of 24 and a median particle size of 8 microns. SERICRON® 3M is used in construction products such as joint compound, adhesives, sealants, putties, and ...展开 SERICRON® 3M is a talc product which has a high chemical resistance. This product has an oil absorption of 24 and a median particle size of 8 microns. SERICRON® 3M is used in construction products such as joint compound, adhesives, sealants, putties, and caulks. 收起 | |
SERICRON® 4M | Specialty Minerals | SERICRON® 4M is a talc product which has a high chemical resistance. This product has an oil absorption of 30 and a median particle size of 4 microns. SERICRON® 4M is used in construction products such as joint compound, adhesives, sealants, putties, and ...展开 SERICRON® 4M is a talc product which has a high chemical resistance. This product has an oil absorption of 30 and a median particle size of 4 microns. SERICRON® 4M is used in construction products such as joint compound, adhesives, sealants, putties, and caulks. 收起 | |
SERICRON® 5M | Specialty Minerals | SERICRON® 5M is a talc product which has a high chemical resistance. This product has an oil absorption of 36 and a density of 2.8. SERICRON® 5M is used in construction products such as joint compound, adhesives, sealants, putties, and caulks. | |
SERICRON® 6M | Specialty Minerals | SERICRON® 6M is a talc product which has a high chemical resistance. This product has an oil absorption of 39 and a pH value of 8.8. SERICRON® 6M is used in construction products such as joint compound, adhesives, sealants, putties, and caulks. | |
STRUCAL® F | Specialty Minerals | STRUCAL® F is a micro-crystalline white powder which has a controlled particle shape and size. This product has an apparent density of between 0.32 and 0.43 g/ml and has a high chemical purity. STRUCAL® F is used in paints and inks. | |
TALCRON® MP 10-52 | Specialty Minerals | TALCRON® MP 10-52 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 1 micron and an oil absorption of 55. TALCRON® MP 10-52 is used in paint, coatings, adhesives, and sea...展开 TALCRON® MP 10-52 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 1 micron and an oil absorption of 55. TALCRON® MP 10-52 is used in paint, coatings, adhesives, and sealants. 收起 | |
TALCRON® MP 12-50 | Specialty Minerals | TALCRON® MP 12-50 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 1.2 microns and an oil absorption of 53. TALCRON® MP 12-50 is used in paint, coatings, adhesives, and ...展开 TALCRON® MP 12-50 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 1.2 microns and an oil absorption of 53. TALCRON® MP 12-50 is used in paint, coatings, adhesives, and sealants. 收起 | |
TALCRON® MP 15-38 | Specialty Minerals | TALCRON® MP 15-38 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 2 microns and an oil absorption of 42. TALCRON® MP 15-38 is used in paint, coatings, adhesives, and se...展开 TALCRON® MP 15-38 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 2 microns and an oil absorption of 42. TALCRON® MP 15-38 is used in paint, coatings, adhesives, and sealants. 收起 | |
TALCRON® MP 30-36 | Specialty Minerals | TALCRON® MP 30-36 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 3 microns and an oil absorption of 34. TALCRON® MP 30-36 is used in paint, coatings, adhesives, and se...展开 TALCRON® MP 30-36 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 3 microns and an oil absorption of 34. TALCRON® MP 30-36 is used in paint, coatings, adhesives, and sealants. 收起 | |
TALCRON® MP 40-27 | Specialty Minerals | TALCRON® MP 40-27 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 4 microns and an oil absorption of 30. TALCRON® MP 40-27 is used in paint, coatings, adhesives, and se...展开 TALCRON® MP 40-27 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 4 microns and an oil absorption of 30. TALCRON® MP 40-27 is used in paint, coatings, adhesives, and sealants. 收起 | |
TALCRON® MP 44-26 | Specialty Minerals | TALCRON® MP 44-26 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 5 microns and an oil absorption of 28. TALCRON® MP 44-26 is used in paint, coatings, adhesives, and se...展开 TALCRON® MP 44-26 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 5 microns and an oil absorption of 28. TALCRON® MP 44-26 is used in paint, coatings, adhesives, and sealants. 收起 | |
TALCRON® MP 45-26 | Specialty Minerals | TALCRON® MP 45-26 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 8 microns and an oil absorption of 26. TALCRON® MP 45-26 is used in paint, coatings, adhesives, and se...展开 TALCRON® MP 45-26 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 8 microns and an oil absorption of 26. TALCRON® MP 45-26 is used in paint, coatings, adhesives, and sealants. 收起 | |
Thixo-Carb® 300 | Specialty Minerals | Thixo-Carb® 300 is a surface treated, ultra-fine precipitated calcium carbonate which has a narrow distribution and controlled particle size. This product has a surface area of 12 m2/ grams and an average particle size of 0.15 microns. Thixo-Carb® is used...展开 Thixo-Carb® 300 is a surface treated, ultra-fine precipitated calcium carbonate which has a narrow distribution and controlled particle size. This product has a surface area of 12 m2/ grams and an average particle size of 0.15 microns. Thixo-Carb® is used in high performance sealant systems. 收起 | |
Thixo-Carb® 500 | Specialty Minerals | Thixo-Carb® 500 is a surface coated, ultra-fine precipitated calcium carbonate which has a uniform particle size. This product has a surface area of 9.8 m2/grams and specific gravity 2.7. Thixo-Carb® 500 is used in epoxy and butyl polymeric sealant system...展开 Thixo-Carb® 500 is a surface coated, ultra-fine precipitated calcium carbonate which has a uniform particle size. This product has a surface area of 9.8 m2/grams and specific gravity 2.7. Thixo-Carb® 500 is used in epoxy and butyl polymeric sealant systems. 收起 | |
Titanix JA-1 | Tayca Corporation | Titanix JA-1 is a photocatalytic, pigment grade anatase titanium dioxide. It is comprised of 99% TiO2 with a neutral pH balance. It is suitable for use in paints and coatings. | |
TKC-303 | Tayca Corporation | TKC-303 is a titania coating of an anatase crystal structure. This product contains a high TiO2 concentration that can harden at room temperature and exhibit high photocatalytic activity plus high film hardness. | |
TKC-304 | Tayca Corporation | TKC-304 is a titania coating of an anatase crystal structure. This product contains a neutral to high TiO2 concentration that can harden at room temperature and exhibit high photocatalytic activity plus high film hardness. | |
TKC-305 | Tayca Corporation | TKC-305 is a titania coating of an anatase crystal structure. This product contains titanyl ammonium oxalate that can exhibit very high film hardness by calcination(500°C). | |
Toluidine Maroon | Hangzhou Hongyan Pigment Chemical Co., Ltd. | Toluidine Maroon is a bluish red pigment. This product is most commonly used in industrial paint applications. It has a heat resistance of 140°C and a pH value of 6.5-7.5. | |
Toluidine Red RN | Hangzhou Hongyan Pigment Chemical Co., Ltd. | Toluidine Red RN is a yellowish red pigment. This product is most commonly used in water based paint and industrial paint applications. It has a heat resistance of 120°C and a pH value of 6.5-7.5. | |
ULTRA-PFLEX® | Specialty Minerals | ULTRA-PFLEX® is a nano-sized, surface treated, high quality precipitated calcium carbonate which has a narrow particle size distribution. This product has an average particle size of 0.07 and a surface area of 19 m2/grams. ULTRA-PFLEX® improves performanc...展开 ULTRA-PFLEX® is a nano-sized, surface treated, high quality precipitated calcium carbonate which has a narrow particle size distribution. This product has an average particle size of 0.07 and a surface area of 19 m2/grams. ULTRA-PFLEX® improves performance properties to paint, coatings, adhesives, and sealants. 收起 | |
Uniphur Black BRN | UNIVERSAL DYECHEM PVT. LTD. | Uniphur Black BRN is a Sulphur Dyestuff with a Color Index Number of Black 1. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
Uniphur Blue 2BN | UNIVERSAL DYECHEM PVT. LTD. | Uniphur Blue 2BN is a Sulphur Dyestuff with a Color Index of Blue 7. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
Uniphur Yellow Brown | UNIVERSAL DYECHEM PVT. LTD. | Uniphur Yellow Brown is a Sulphur Dyestuff with a Color Index Number of Brown 10. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
Uniphur Yellow GC | UNIVERSAL DYECHEM PVT. LTD. | Uniphur Yellow GC is a Sulphur Dyestuff with a Color Index Number of Yellow 2. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
Univat Brown BR | UNIVERSAL DYECHEM PVT. LTD. | Univat Brown BR is a vat dyestuff with a Color Index of 1. This product is used for cotton, viscose and linen fibers and as an additive in paints, coatings and inks. | |
Univat Green FB | UNIVERSAL DYECHEM PVT. LTD. | Univat Green FB is a dyestuff with a Color Index Number of 1 and a Color Index Name of 42040:1. This product is used for cotton, viscose and linen fibers and as an additive in paints, coatings and inks. | |
Univat Grey 2B | UNIVERSAL DYECHEM PVT. LTD. | Univat Grey 2B is a vat dyestuff with a Color Index of Black 16. This product is used for cotton,viscose and linen fibers and as an additive in paints, coatings and inks. | |
Univat Indigo Blue | UNIVERSAL DYECHEM PVT. LTD. | Univat Indigo Blue is a Vat Dyestuff with a Color Index Number of Indigo Blue 1. This product is used for cotton, viscose and linen fibers that has several different shades and as an additive in paints, coatings and inks. | |
Univat Khaki 2G | UNIVERSAL DYECHEM PVT. LTD. | Univat Khaki 2G is a Vat Dyestuff with a Color Index of Green 8. It is used for cotton, viscose and linen fibers that has several different shades and as an additive in paints, coatings and inks. | |
Univat Olive R | UNIVERSAL DYECHEM PVT. LTD. | Univat Olive R is a Vat Dyestuff with a Color Index Number of Black 27. It is used for cotton, viscose and linen fibers and as an additive in paints, coatings and inks. | |
Univat Olive T | UNIVERSAL DYECHEM PVT. LTD. | Univat Olive T is a Vat Dyestuff with a Color Index Number of Black 25. It is used in cotton, viscose and linen fibers that has several different shades and as an additive in paints, coatings and inks. | |
Univat Red 6B | UNIVERSAL DYECHEM PVT. LTD. | Univat Red 6B is a Vat Dyestuff with a Color Index Number of Red 13. It is a product used for cotton, viscose and linen fibers that has several different shades as well as an additive in paints, coatings and inks. | |
Univat Violet 2R | UNIVERSAL DYECHEM PVT. LTD. | Univat Violet 2R is a Vat Dyestuff with a Color Index Number of Violet 1. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
Univat Yellow GC | UNIVERSAL DYECHEM PVT. LTD. | Univat Yellow GC is a Vat Dyestuff with a Color Index Number of Yellow 2. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
VICRON® 15-15 | Specialty Minerals | VICRON® 15-15 is a mineral additive which consists of limestone and quartz. This product has an average particle size 3.5 microns and an oil absorption of 20 percent. VICRON® 15-15 provides a controlled particle size and a low surface area to paints and c...展开 VICRON® 15-15 is a mineral additive which consists of limestone and quartz. This product has an average particle size 3.5 microns and an oil absorption of 20 percent. VICRON® 15-15 provides a controlled particle size and a low surface area to paints and coatings. 收起 | |
VICRON® 25-11 | Specialty Minerals | VICRON® 25-11 is a mineral additive which consists of limestone and quartz. This product has an average particle size 5.5 microns and an oil absorption of 18 percent. VICRON® 25-11 provides a controlled particle size and a low surface area to paints and c...展开 VICRON® 25-11 is a mineral additive which consists of limestone and quartz. This product has an average particle size 5.5 microns and an oil absorption of 18 percent. VICRON® 25-11 provides a controlled particle size and a low surface area to paints and coatings. 收起 | |
VICRON® 31-6 | Specialty Minerals | VICRON® 31-6 is a mineral additive which consists of limestone and quartz. This product has an average particle size 6.5 microns and an oil absorption of 16 percent. VICRON® 31-6 provides a controlled particle size and a low surface area to paints and coa...展开 VICRON® 31-6 is a mineral additive which consists of limestone and quartz. This product has an average particle size 6.5 microns and an oil absorption of 16 percent. VICRON® 31-6 provides a controlled particle size and a low surface area to paints and coatings. 收起 | |
VICRON® 41-8 | Specialty Minerals | VICRON® 41-8 is a mineral additive which consists of limestone and quartz. This product has an average particle size 8 microns and a surface area of 1.3 m3/grams. VICRON® 41-8 provides a controlled particle size and a low surface area to paints and coatin...展开 VICRON® 41-8 is a mineral additive which consists of limestone and quartz. This product has an average particle size 8 microns and a surface area of 1.3 m3/grams. VICRON® 41-8 provides a controlled particle size and a low surface area to paints and coatings. 收起 | |
VICRON® 45-3 | Specialty Minerals | VICRON® 45-3 is a mineral additive which consists of limestone and quartz. This product has an average particle size 10 microns and a surface area of 1.1 m3/grams. VICRON® 45-3 provides a controlled particle size and a low surface area to paints and coati...展开 VICRON® 45-3 is a mineral additive which consists of limestone and quartz. This product has an average particle size 10 microns and a surface area of 1.1 m3/grams. VICRON® 45-3 provides a controlled particle size and a low surface area to paints and coatings. 收起 |