| 2,2-Dibromo-3-Nitrilopropionamide (DBNPA) | ChemFine International Co., Ltd. | 2,2-Dibromo-3-Nitrilopropionamide (DBNPA) is a kind of wide spectrum, high efficiency, industrial germicide that can be used in paint and as an adhesive. | |
| BIT | ChemFine International Co., Ltd. | BIT, also known as 1.2-Benzisothiazolin-3-one, is an antiseptic and bactericide that can restrain microbes (algae, fungi, germ, etc.) from growing in organic medium and is applicable in latex product, water-soluble resin (latex paint), photo fixative, pri...展开 BIT, also known as 1.2-Benzisothiazolin-3-one, is an antiseptic and bactericide that can restrain microbes (algae, fungi, germ, etc.) from growing in organic medium and is applicable in latex product, water-soluble resin (latex paint), photo fixative, printing ink and more. 收起 | |
| Cimsil A35 | Tolsa SA | Cimsil A35 is a powdered additive that modifies the rheology of mortar, gypsum plaster, and concrete. It is a thixotropic additive specifically developed to act as an anti-sagging, anti-slipping agent that improves the work ability and visual finish in ...展开 Cimsil A35 is a powdered additive that modifies the rheology of mortar, gypsum plaster, and concrete. It is a thixotropic additive specifically developed to act as an anti-sagging, anti-slipping agent that improves the work ability and visual finish in the systems to which it is incorporated. It can be used in ceramic adhesives, ready mixed adhesives, crack fillers, and pastes. 收起 | |
| Cimsil A55G | Tolsa SA | Cimsil A55G is a thixotropic powder additive. It can be used in cement and/or lime and gypsum systems. It is used as an additive for mortars and stuccos rendering, tile adhesive mortars, self-leveling mortars, and waterproofing mortars. | |
| Cimsil C22 | Tolsa SA | Cimsil C22 is a water dispersible powdered additive for use in mortars. It is developed to act as a water-retaining agent and a rheological additive. It can be used for projected renders and stuccos, skim coats, and monolayer mortars. | |
| Cimsil CT1 | Tolsa SA | Cimsil CT1 is a water dispersible powdered additive. It is developed to act as a water-retaining agent and as an anti-sliding additive in formulations of tile adhesive mortars. It can be used in mortars and tile adhesives. | |
| Cimsil CT2 | Tolsa SA | Cimsil CT2 is a water dispersible powdered additive. It is developed to act as a water-retaining agent and as an anti-sliding additive in formulations of tile adhesives. It can be used in mortars and tile adhesives. | |
| Cimsil D10 | Tolsa SA | Cimsil D10 is a water dispersible powdered additive. It is designed to act as a water-retaining agent and an anti-sliding additive. It can be used in ceramic adhesives, adhesives, crack fillers, and pastes. | |
| Cimsil G30 | Tolsa SA | Cimsil G30 is an attapulgite based additive developed to modify the rheology of wet and dry joint compounds and adhesives. It is developed to improve sag resistance of the compound before drying or setting. It can be used in wet and dry joint fillers, s...展开 Cimsil G30 is an attapulgite based additive developed to modify the rheology of wet and dry joint compounds and adhesives. It is developed to improve sag resistance of the compound before drying or setting. It can be used in wet and dry joint fillers, spackle compounds, crack fillers, mastics, and sealants. 收起 | |
| Cimsil G50 | Tolsa SA | Cimsil G50 is a thixotropic and shear thinning additive. It is developed as an anti-sagging agent in gypsum systems. It can be used for gypsum spray plasters, gypsum compounds, and gypsum based adhesives. | |
| Fillite Standard Grades | Tolsa SA | Fillite Standard Grades consists of glass hard, inert, hollow silicate spheres. It is designed to reduce the weight of plastics, rubbers, resins, and cement. It can be used in PVC flooring, brake linings, phenolics and epoxies, cast polyesters, wallboar...展开 Fillite Standard Grades consists of glass hard, inert, hollow silicate spheres. It is designed to reduce the weight of plastics, rubbers, resins, and cement. It can be used in PVC flooring, brake linings, phenolics and epoxies, cast polyesters, wallboard joint compounds, oil well cement, and tile adhesives. 收起 | |
| Fillite White / High-Alumina Grades | Tolsa SA | Fillite White / High Alumina Grades consists of glass hard, inert, hollow silicate spheres. It is designed to reduce the weights fo plastics, rubbers, resins, and cement. It can be used for gypsum board jointing compounds, veneering plasters, stuccos, s...展开 Fillite White / High Alumina Grades consists of glass hard, inert, hollow silicate spheres. It is designed to reduce the weights fo plastics, rubbers, resins, and cement. It can be used for gypsum board jointing compounds, veneering plasters, stuccos, sealants, coatings, cast resins, refractories, foundry applications, or high temperatures resistant coatings. 收起 | |
| Hycure 1173 | ChemFine International Co., Ltd. | Hycure 1173, also known as 2-Hydroxy-2-Methyl-1-Phenylpropan, is a photoinitiator for ultraviolet solidify systems that can extend the storeable time and keep it from turning yellow for a long time. | |
| Hycure 184 | ChemFine International Co., Ltd. | Hycure 184, also known as 1-Hydroxycyclohexyl Phenyl Ketone, is a photoinitiator used for ultraviolet solidify systems that can extend its store-able time and keep it from turning yellow for a long time. | |
| Hycure 907 | ChemFine International Co., Ltd. | Hycure 907, also known as 2-Methy-1-[4-(methylthio)-Phenyl]-2-Morpholinopropan-1-One, is a high performance photoinitiator and is used for ultraviolet solidify systems, extending its store-able time and keeping it from turning yellow for a long time. | |
| Hycure BDK | ChemFine International Co., Ltd. | Hycure BDK, also known as 2,2-Dimethoxy- 2-Phenylacetophenone, is a photoinitiator that is mainly used as the light curing agent for ultraviolet curing systems, metal paints, paper paints, and is applied to printing ink. | |
| Hycure Benzil | ChemFine International Co., Ltd. | Hycure Benzil, also known as Bibenzoyl, is a photoinitiator used as the raw material for certain medicines, an intermediary for organic synthesis, is an ultraviolet hardening agent and a pesticide. | |
| Hycure Benzoin | ChemFine International Co., Ltd. | Hycure Benzoin, also known as 2-diphenyl ethanone, is used as a photoinitiator in regards to photo-curable coatings also as an antiseptic in the pharmaceutical industry. | |
| Hycure Benzophenone | ChemFine International Co., Ltd. | Hycure Benzophenone is an ultraviolet radiation absorber and intermediate for organic pigments. | |
| Hycure ITX | ChemFine International Co., Ltd. | Hycure ITX, also known as Isopropyl thioxanthone, has applications in color or transparent UV-photocurable ink, binder, and paint. | |
| JLS-APP | ChemFine International Co., Ltd. | JLS-APP, also known as ammonium polyphosphate, is used in intumescent flame retardant coating, as well as polyurethane foam and cellulose. | |
| Microsil 100 | Tolsa SA | Microsil 100 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor....展开 Microsil 100 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, textural paint, putties and mastics, and tile adhesives. 收起 | |
| Microsil 100S | Tolsa SA | Microsil 100S consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting...展开 Microsil 100S consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor that also require a lower viscosity or smaller absorption. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, textural paint, putties and mastics, and tile adhesives. 收起 | |
| Microsil 200 | Tolsa SA | Microsil 200 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor. ...展开 Microsil 200 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, putties and mastics, and tile adhesives. 收起 | |
| Microsil 200S | Tolsa SA | Microsil 200S consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting f...展开 Microsil 200S consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor that also require a lower viscosity or smaller absorption. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, putties and mastics, and tile adhesives. 收起 | |
| Microsil 325 | Tolsa SA | Microsil 325 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It was designed to be used in applications requiring a small particle size. It can be ...展开 Microsil 325 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It was designed to be used in applications requiring a small particle size. It can be used in synthetic marble and polymeric mortars, asphalt emulsions, resin based waterproofing coatings, friction materials, textural paints, putties, and mastics. 收起 | |
| Microsil 325S | Tolsa SA | Microsil 325 consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It was designed to be used in applications requiring a small particle size or in a...展开 Microsil 325 consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It was designed to be used in applications requiring a small particle size or in applications where a lower viscosity or smaller absorption is required. It can be used in synthetic marble and polymeric mortars, asphalt emulsions, resin based waterproofing coatings, friction materials, textural paints, putties, and mastics. 收起 | |
| OIT | ChemFine International Co., Ltd. | OIT, also known as 2-Octyl-4-Isothiazolin-3-Ketone, is a low toxic and highly effective broad spectrum antiseptic that is mainly used to control mildew. This product is also applicable in polymer emulsions, adhesives, sealants, and paint. | |
| Pangel AD | Tolsa SA | Pangel AD is a rheological additive that is manufactured from high purity sepiolite. It controls system flow and consistency for components such as solvents and fillers. It can be used in water-based paints, foundry coatings, friction elements, gaskets,...展开 Pangel AD is a rheological additive that is manufactured from high purity sepiolite. It controls system flow and consistency for components such as solvents and fillers. It can be used in water-based paints, foundry coatings, friction elements, gaskets, epoxy adhesives, sealants, and mastics. 收起 | |
| Pangel B10 | Tolsa SA | Pangel B10 is a powdered additive with high thickening and anti-settling capacity for medium-low polarity systems. It offers thixotropic, suspension, and sagging resistance properties based on White Spirit type solvents. It can be used in paints, coatin...展开 Pangel B10 is a powdered additive with high thickening and anti-settling capacity for medium-low polarity systems. It offers thixotropic, suspension, and sagging resistance properties based on White Spirit type solvents. It can be used in paints, coatings, printing inks, drilling mud, greases, sealants and joints, asphalt coatings, putties, rubber, gel-coat, and emulsions. 收起 | |
| Pangel B20 | Tolsa SA | Pangel B20 is a powdered additive with high thickening and anti-setting capacity for intermediate polarity systems. It provides thixotropic, suspension, and sagging resistance properties to systems based on aromatic and unsaturated polyester type solvent...展开 Pangel B20 is a powdered additive with high thickening and anti-setting capacity for intermediate polarity systems. It provides thixotropic, suspension, and sagging resistance properties to systems based on aromatic and unsaturated polyester type solvents. It can be used in paints, coatings, printing inks, unsaturated polyester putties, paint strippers, greases, asphalt coatings, sealants and joints, plastisol and rubber, emulsions, gel-coats, and nail varnish,. 收起 | |
| Pangel B40 | Tolsa SA | Pangel B40 is a powdered additive with high thickening and anti-settling capacity for high polarity systems, particularly those based on alcohol, glycol, or ketone type solvents, or in mixtures of those with water. It is recommended to provide thixotropi...展开 Pangel B40 is a powdered additive with high thickening and anti-settling capacity for high polarity systems, particularly those based on alcohol, glycol, or ketone type solvents, or in mixtures of those with water. It is recommended to provide thixotropic, suspension, and sagging-resistance properties. It can be used in coatings, paints, printing inks, paint strippers, sealants and joints, vinyl plastisol, gel-coat, nail varnish, wash coat alcohols, glycols, and esters. 收起 | |
| Pangel B5 | Tolsa SA | Pangel B5 is a powdered additive with a high thickening and anti-setting capacity for low polarity systems, particularly those based on both aliphatic solvents and mineral or synthetic oils. It provides thixotropic, suspension and sagging-resistance prop...展开 Pangel B5 is a powdered additive with a high thickening and anti-setting capacity for low polarity systems, particularly those based on both aliphatic solvents and mineral or synthetic oils. It provides thixotropic, suspension and sagging-resistance properties based on both aliphatic type solvents and mineral or synthetic oils. It can be used in solvent-borne paints and coatings, lubricant greases, and drilling mud. 收起 | |
| Pangel HV | Tolsa SA | Pangel HV is a rheological additive that is manufactured using high purity sepiolite in the form of high porosity pellets. It controls system flow and consistency of components including solvents and fillers. It can be used in fibro-cement, water-based ...展开 Pangel HV is a rheological additive that is manufactured using high purity sepiolite in the form of high porosity pellets. It controls system flow and consistency of components including solvents and fillers. It can be used in fibro-cement, water-based paints, foundry coatings, asphalt emulsions, suspension fertilisers, and liquid fertilisers. 收起 | |
| Pangel M100 | Tolsa SA | Pangel M100 is a thickening and anti-settling agent made of purified bentonite clay. It is developed to give water-borne formulations with stability, viscosity and adhesion control as well as texturing and surface finishing. It is used for adhesives, em...展开 Pangel M100 is a thickening and anti-settling agent made of purified bentonite clay. It is developed to give water-borne formulations with stability, viscosity and adhesion control as well as texturing and surface finishing. It is used for adhesives, emulsion paints, textural paints, and bituminous emulsion. 收起 | |
| Pangel M150 | Tolsa SA | Pangel M150 is a thickening and anti-setting agent made of purified bentonite clay. It was developed for providing water-borne formulations with stability and viscosity control, sedimentation and sagging control, workability, and water retention. It can...展开 Pangel M150 is a thickening and anti-setting agent made of purified bentonite clay. It was developed for providing water-borne formulations with stability and viscosity control, sedimentation and sagging control, workability, and water retention. It can be used for adhesives, bituminous emulsion, and seed coatings. 收起 | |
| Pangel M280 | Tolsa SA | Pangel M280 is a thickening and anti-setting agent made of purified bentonite clay. It is developed to provide water-borne formulations with stability and viscosity control, adhesion control, texturing and stippling effects, and strong binding properties...展开 Pangel M280 is a thickening and anti-setting agent made of purified bentonite clay. It is developed to provide water-borne formulations with stability and viscosity control, adhesion control, texturing and stippling effects, and strong binding properties. It can be used for adhesives, emulsion paints, bituminous emulsion, textural paints, and granulation and agglomeration. 收起 | |
| Pangel OM4 | Tolsa SA | Pangel OM4 is a rheological additive for intermediate to low polarity systems made from purified bentonite clay. It is recommended for solvent-borne systems that require thixotropic and pseudoplastic effects, sag control, levelling, pigment settling, and...展开 Pangel OM4 is a rheological additive for intermediate to low polarity systems made from purified bentonite clay. It is recommended for solvent-borne systems that require thixotropic and pseudoplastic effects, sag control, levelling, pigment settling, and high viscosity and consistency over a wide temperature range. it can be used in anti-corrosive paints, polyester coatings, primers, industrial finishes road marking paints, varnishes, lubricating greases, and bituminous undercoats. 收起 | |
| Pangel OM8 | Tolsa SA | Pangel OM8 is a rheological additive for low to medium polarity systems made from purified bentonite clay. It is recommended for systems based on resins such as polyurethanes, acrylics, polyester, epoxy esters, and alkyds. It can be used in anti-corrosi...展开 Pangel OM8 is a rheological additive for low to medium polarity systems made from purified bentonite clay. It is recommended for systems based on resins such as polyurethanes, acrylics, polyester, epoxy esters, and alkyds. It can be used in anti-corrosive paints, polyester coatings, primers, industrial finishes, road marking paints, bituminous undercoats, varnishes, and inks. 收起 | |
| Pangel OMD1 | Tolsa SA | Pangel OMD1 is a self-dispersing rheological additive for medium to low polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control...展开 Pangel OMD1 is a self-dispersing rheological additive for medium to low polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control, levelling, and pigment settling prevention. It can be used in anti-corrosive paints, polyester coatings, primers, industrial finishes, road marking paints, varnishes, lubricating greases, and bituminous undercoats. 收起 | |
| Pangel OMD2 | Tolsa SA | Pangel OMD2 is a rheological additive for medium to high polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control, levelling, an...展开 Pangel OMD2 is a rheological additive for medium to high polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control, levelling, and pigment settling prevention. It can be used in anti-corrosive paints, adhesives, industrial finishes, maintenance coatings, epoxy based coatings, and paint removers. 收起 | |
| Pangel S9 | Tolsa SA | Pangel S9 is a powdered rheological additive made from sepiolite for use in aqueous systems. It controls the system flow and consistency of components including solvents and fillers. It can be used for asphalt sheets and emulsions, anti-corrosion coatin...展开 Pangel S9 is a powdered rheological additive made from sepiolite for use in aqueous systems. It controls the system flow and consistency of components including solvents and fillers. It can be used for asphalt sheets and emulsions, anti-corrosion coatings, water-based paints, foundry coatings, friction elements, gaskets, epoxy adhesives, sealants and mastics, and additives for cement and gypsum systems. 收起 | |
| Pansil | Tolsa SA | Pansil is a polyfunctional additive manufactured from sepiolite. It is used as a suspension aid and active filler. It can be used in asphalt sheets, multi-color paints, and rubber. | |
| Pansil 100 | Tolsa SA | Pansil 100 is a polyfunctional additive, which is supplied as a fine powder manufactured from sepiolite. It can be used as a suspension aid and active filler. It can be used in asphalt sheets, conglomeration in molecular sieves, seed coating, and asphal...展开 Pansil 100 is a polyfunctional additive, which is supplied as a fine powder manufactured from sepiolite. It can be used as a suspension aid and active filler. It can be used in asphalt sheets, conglomeration in molecular sieves, seed coating, and asphalt emulsions. 收起 | |
| Pansil UltraSpheres™ 2000 | Tolsa SA | Pansil UltraSpheres™ 2000 consists of ceramic microspheres. It is used as an additive or filler for paints, coatings, mastics, and other construction materials. It can be used in film/antiblock applications, top coats, high solid industrial coatings, an...展开 Pansil UltraSpheres™ 2000 consists of ceramic microspheres. It is used as an additive or filler for paints, coatings, mastics, and other construction materials. It can be used in film/antiblock applications, top coats, high solid industrial coatings, and decorative powder coatings. 收起 | |
| Pansil UltraSpheres™ 4000 | Tolsa SA | Pansil UltraSpheres™ 4000 consists of ceramic microspheres. It can be used as an additive or filler for paints, coatings, mastics, and other construction materials. It can be used in high solid industrial coatings, heavy duty maintenance coatings, marin...展开 Pansil UltraSpheres™ 4000 consists of ceramic microspheres. It can be used as an additive or filler for paints, coatings, mastics, and other construction materials. It can be used in high solid industrial coatings, heavy duty maintenance coatings, marine coatings, aircraft coatings, water reducible industrial coatings, powder coatings, coil coatings, radiation-curable inks and coatings, and primers. 收起 | |
| Pansil UltraSpheres™ 6000 | Tolsa SA | Pansil UltraSperes™ 6000 consists of ceramic microspheres. It can be used as an additive or filler for paints, coatings, mastics, and other construction materials. It can be used in polymer concrete, epoxy flooring, textured coatings, and friction mater...展开 Pansil UltraSperes™ 6000 consists of ceramic microspheres. It can be used as an additive or filler for paints, coatings, mastics, and other construction materials. It can be used in polymer concrete, epoxy flooring, textured coatings, and friction materials. 收起 | |
| Pansil UltraSpheres™ 8000 | Tolsa SA | Pansil UltraSpheres™ 8000 consists of ceramic microspheres. They are used as additives and fillers and paints, coatings, mastics, and other construction materials. It can be used in polymer concrete, epoxy flooring, textured coatings, and friction mater...展开 Pansil UltraSpheres™ 8000 consists of ceramic microspheres. They are used as additives and fillers and paints, coatings, mastics, and other construction materials. It can be used in polymer concrete, epoxy flooring, textured coatings, and friction materials. 收起 | |
| TGIC | ChemFine International Co., Ltd. | TGIC, also known as Tris(2,3-Epoxyproryl)Isocyanurate, is used primarily as a curing agent for polyester powder coatings. This product also has applications in the manufacture of electrical insulation materials, printed circuits, tools, laminated sheeting...展开 TGIC, also known as Tris(2,3-Epoxyproryl)Isocyanurate, is used primarily as a curing agent for polyester powder coatings. This product also has applications in the manufacture of electrical insulation materials, printed circuits, tools, laminated sheetings, adhesives, and more. 收起 | |
| THEIC | ChemFine International Co., Ltd. | THEIC, also known as Tris (2-Hydroxyethyl) Isocyanurate, has applications in modified polyimide insulating varnish, paint for the base plate of automobiles, the manufacture of high-quality heat-resisting alcohol acid and plasticizer, and in the printing, ...展开 THEIC, also known as Tris (2-Hydroxyethyl) Isocyanurate, has applications in modified polyimide insulating varnish, paint for the base plate of automobiles, the manufacture of high-quality heat-resisting alcohol acid and plasticizer, and in the printing, textile, plastics, and photo industries. 收起 |
