| EXOCOAT™ 143 | Axcentive Sarl | EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS ...展开 EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS as well as to old coating layers. It covalently bonds with the substrate resulting in a very durable finish. It can be used as a standalone resin or might be formulated with other raw materials like white and colored pigments, organic resins, fillers, and additives. The use of water-based raw materials should be avoided. Durability is a unique feature of EXOCOAT® 143. It can sustain mechanical abrasion, and chemical attack and is UV stable. When applied at a very low layer thickness of 0.5 to 2µm it provides the surface with a protective hard coating that shows durable easy-to-clean, dirt resistance, anti-graffiti, and strong water repellency properties. It is suitable for ambient or force-cured, high-performance industrial coatings such as protective, coil, marine, and automotive. EXOCOAT® 143-based paints may be brushed, rolled, or sprayed by HVLP or airless spray. 收起 | |
| EXOCOAT™ 151A | Axcentive Sarl | EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...展开 EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151A. It can be used as a general air purifier. Though most effective in outdoor light conditions, it is adapted for use under visible light as found in the interior. In all cases, it should be used as a topcoat to ensure its full effect. Glass and walls coated with EXOCOAT® 151A are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It may be used on other flat surfaces such as plastics or coated substrates yet only interior. It dries under room temperature conditions. Spray application is recommended to reach thin monolayers which prove to be more effective. It is listed with EINECS. TSCA, AICS, and CEPA. 收起 | |
| EXOCOAT™ 151B | Axcentive Sarl | EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...展开 EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151B. In all cases, it should be used as a topcoat to ensure its full effect. EXOCOAT® 151B coated walls are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It is targeted for porous substrates like concrete, brickwork, and gypsum. It is not meant for glass substrates. It dries under room temperature conditions. Brush, roller, or Spray application is recommended to reach homogeneous coatings. It is listed with EINECS. TSCA, AICS, and CEPA. 收起 | |
| EXOCOAT™ 161 | Axcentive Sarl | EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extre...展开 EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extreme hardness (9H). Offers chemical-, scratch-, oxidation resistance, and temperature resistance over 1000°C for prolonged time. It can function as stand-alone resin at a layer thickness of 0.5 to 2 µm to form a durable finish that can be easy to clean. It bonds to substrates such as steel, aluminum, glass, and old coating layers. It can be used as conversion coating replacing Cr(VI). It may be co-formulated with the most frequently used coating ingredients from the group of pigments, fillers, resins, additives, and (co-)solvents and creates colored, super hard, or matte surfaces. EXOCOAT® 161 is highly advised to be used in aprotic solvents. It has a shelf life of 6 months. 收起 | |
| EXOCOAT™ AC | Axcentive Sarl | EXOCOAT® AC by Axcentive is a hybrid sol-gel resin for anti-corrosive conversion coatings in 60% ethanol. It is covalently bonded to the surface and applied directly to metal (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). ...展开 EXOCOAT® AC by Axcentive is a hybrid sol-gel resin for anti-corrosive conversion coatings in 60% ethanol. It is covalently bonded to the surface and applied directly to metal (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It functions as a replacement for the Cr3+ and Cr6+ based system as used in metal plating and automotive industries. It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It can also be used as micrometer-thin primers under conventional organic coatings. It can be overcoated by epoxy primer or polyurethane topcoat systems. EXOCOAT® AC is suitable for conventional low & high pressure airless and air-mixing spraying, dipping, rolling, and brushing. It has a shelf life of 12 months. 收起 | |
| EXOCOAT™ ACX-W | Axcentive Sarl | EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless ...展开 EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It is used as a replacement for chromium-based primers on aluminum and other metals. It can be used as a conversion primer for a coating system based on an epoxy coating and polyurethane topcoat. It may omit toxic chemicals and functions as a replacement for Cr3+ and Cr6+-based systems used in metal plating and aerospace industries. EXOCOAT® ACX-W is applied with conventional low-pressure and high-pressure airless and air-mix spraying, dipping, rolling and brushing. It has a shelf life of 12 months. 收起 | |
| EXOCOAT™ AM | Axcentive Sarl | EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down v...展开 EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down viruses and bacteria. It eradicates viruses such as influenza, SARS-COV-2, dengue & hepatitis and bacteria such as E. coli, MSRA, streptococcus, listeria, pneumonia, and salmonella. It is activated by light and displays quick drying at room temperature. Spray application is recommended to reach thin monolayers. It exhibits curing at room temperature up to 300°C and super hard particles (1GPa Vickers). It is easy to apply & durable, allowing longer disinfection intervals while preserving hygiene level. It shows non-silver leaching, efficacious even under low light conditions, lower service frequency, and no need for frequent disinfection routine. It is used in the state-of-the-art continuous antimicrobial coating for high-traffic areas. EXOCOAT® AM is suitable for topcoats for any surface inside buildings, stores, hospitals, and vehicles. The shelf life of this product is 9 months. 收起 | |
| EXOCOAT™ Clearview | Axcentive Sarl | EXOCOAT® Clearview by Axcentive is a 1K hybrid sol-gel system in ethanol. It has been designed for water-repellent, easy-to-clean coatings for glass and ceramic substrates. A substrate coated with EXOCOAT® Clearview will turn into a hard, water-repellent ...展开 EXOCOAT® Clearview by Axcentive is a 1K hybrid sol-gel system in ethanol. It has been designed for water-repellent, easy-to-clean coatings for glass and ceramic substrates. A substrate coated with EXOCOAT® Clearview will turn into a hard, water-repellent durable easy-to-clean surface. EXOCOAT® Clearview keeps windscreens clean from raindrops and improves vision drastically, especially in difficult wet road conditions, which can be experienced day and night. Besides, it can be used to make easy-to-clean, water shedding tiles and chrome for example used in kitchens and bathrooms. 收起 | |
| EXOCOAT™ Clearview-2 | Axcentive Sarl | EXOCOAT® Clearview-2 by Axcentive is a 2K hybrid sol-gel in ethanol. It is designed for durable water repellent, easy-to-clean, dirt resistant glass coatings. This solvent-based nanosystem can be applied in coatings for automotive windscreens, or glass ba...展开 EXOCOAT® Clearview-2 by Axcentive is a 2K hybrid sol-gel in ethanol. It is designed for durable water repellent, easy-to-clean, dirt resistant glass coatings. This solvent-based nanosystem can be applied in coatings for automotive windscreens, or glass bathroom doors. It can be applied as such or diluted, in coatings as a monolayer to obtain a very hard and durable hydrophobic surface. EXOCOAT® Clearview-2 keeps windows clean from raindrops and improves vision drastically, especially in difficult wet road conditions, which can be experienced day and night. In bathroom glass, it makes the water run down fast and avoids water spots. 收起 | |
| EXOCOAT™ SH | Axcentive Sarl | EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pave...展开 EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pavement, walls, and stucco to get the so-called Lotus Effect. The sol-gel system deposits superhydrophobic particles on the porous substrate. EXOCOAT® SH will not form a film and as a result, the wall stays breathable. With the contact angle of 145o water droplets bounce back from the surface and will roll down immediately upon touch. Thus, the wall remains dry, and clean and will behave as an efficient barrier against water. 收起 | |
| NA100 Anatase | Nanjing Titanium Dioxide Chemical Co., Ltd. | NA100 Anatase is an anatase titanium dioxide that is designed to provide strong covering power, good pigment performance, high lightening power, and low oil absorption. This product is commonly used in interior wall coatings, and it has a TiO2 content of ...展开 NA100 Anatase is an anatase titanium dioxide that is designed to provide strong covering power, good pigment performance, high lightening power, and low oil absorption. This product is commonly used in interior wall coatings, and it has a TiO2 content of 98.0% and a pH value of 6.5-8.5. 收起 | |
| Nepa Fast Blue 43150 | Nepa Overseas | Nepa Fast Blue 43150 is a pigment that comes in the form of a blue odorless powder. It has a specific gravity of 1.72 and a particle size of 325 mesh. Nepa Fast Blue 43150 is used in paint and ink applications. | |
| Nepa Fast Blue 43151 | Nepa Overseas | Nepa Fast Blue 43151 is a pigment that comes in the form of a blue odorless powder. It has a specific gravity of 1.6 and a particle size of 325 mesh. Nepa Fast Blue 43151 is used in paint applications. | |
| Nepa Fast Blue 43151-LI | Nepa Overseas | Nepa Fast Blue 43151-LI is a pigment used in liquid inks. It has an oil absorption of 46.5 and a bulk volume of 2.1 cc/gm. | |
| Nepa Fast Blue 43151-OI | Nepa Overseas | Nepa Fast Blue 43151-OI is a pigment used in offset inks. It has an oil absorption of 43.5-45.5 and a bulk volume of 2.6-2.7 cc/gm. | |
| Nepa Fast Blue 43151-PA | Nepa Overseas | Nepa Fast Blue 43151-PA is a pigment used in specifically solvent-based paints. It has an oil absorption of 40 and a bulk volume of 3.2 cc/gm. | |
| Nepa Fast Blue 43151-WBI | Nepa Overseas | Nepa Fast Blue 43151-WBI is a pigment used in specifically water-based paints. It has an oil absorption of 38-40 and a bulk volume of 2.75 cc/gm. | |
| Nepa Fast Blue 43754 | Nepa Overseas | Nepa Fast Blue 43754 is a pigment used in paints and liquid inks. It has an oil absorption of 40 and a bulk volume of 1.9 cc/gm. | |
| Nepa Fast Green 43157 | Nepa Overseas | Nepa Fast Green 43157 is a pigment that comes in a green powder, used in paints and inks. It has an oil absorption of 35 and a bulk volume of 2.5 cc/gm. | |
| NR950 Rutile | Nanjing Titanium Dioxide Chemical Co., Ltd. | NR950 Rutile is a rutile titanium dioxide that is designed to provide excellent whiteness and glossiness, strong covering power, good weather resistance, heat resistance, and light resistance. This product is commonly used in coatings and inks, and it has...展开 NR950 Rutile is a rutile titanium dioxide that is designed to provide excellent whiteness and glossiness, strong covering power, good weather resistance, heat resistance, and light resistance. This product is commonly used in coatings and inks, and it has a TiO2 content of 92.0% and a pH value of 6.0-8.5. 收起 | |
| NR9501 Rutile | Nanjing Titanium Dioxide Chemical Co., Ltd. | NR9501 Rutile is a rutile titanium dioxide that is designed to provide excellent whiteness and glossiness, strong covering power, good weather resistance, heat resistance, and light resistance. This product is commonly used in oil paints and inks, and it ...展开 NR9501 Rutile is a rutile titanium dioxide that is designed to provide excellent whiteness and glossiness, strong covering power, good weather resistance, heat resistance, and light resistance. This product is commonly used in oil paints and inks, and it has a TiO2 content of 92.0% and a pH value of 6.5-8.5. 收起 | |
| NR9502 Rutile | Nanjing Titanium Dioxide Chemical Co., Ltd. | NR9502 Rutile is a rutile titanium dioxide that is designed to provide excellent whiteness and glossiness, strong covering power, good weather resistance and heat resistance, and good dispersibility in water-based and oil systems. This product is commonly...展开 NR9502 Rutile is a rutile titanium dioxide that is designed to provide excellent whiteness and glossiness, strong covering power, good weather resistance and heat resistance, and good dispersibility in water-based and oil systems. This product is commonly used in interior and outdoor coatings, inks, and powder coatings, and it has a TiO2 content of 92.0% and a pH value of 6.5-8.5. 收起 | |
| NR9503 Rutile | Nanjing Titanium Dioxide Chemical Co., Ltd. | NR9503 Rutile is a rutile titanium dioxide that is designed to provide excellent whiteness, strong covering power, good weather resistance, heat resistance, and light resistance. This product is commonly used in water-based paints, emulsion paints, and wa...展开 NR9503 Rutile is a rutile titanium dioxide that is designed to provide excellent whiteness, strong covering power, good weather resistance, heat resistance, and light resistance. This product is commonly used in water-based paints, emulsion paints, and water-based inks, and it has a TiO2 content of 90.0% and a pH value of 7.0-9.0. 收起 | |
| NR960 Rutile | Nanjing Titanium Dioxide Chemical Co., Ltd. | NR960 Rutile is a rutile titanium dioxide that is designed to provide excellent whiteness and glossiness, strong covering power, low oil absorption, good weather resistance, heat resistance, and light resistance. This product is commonly used in interior ...展开 NR960 Rutile is a rutile titanium dioxide that is designed to provide excellent whiteness and glossiness, strong covering power, low oil absorption, good weather resistance, heat resistance, and light resistance. This product is commonly used in interior and outdoor coatings, powder coatings, and inks, and it has a TiO2 content of 93.0% and a pH value of 6.5-8.0. 收起 | |
| Sulphur Black BR 200% | Zhengding Shengguo Chemical Factory | Sulphur Black BR 200%, in the form of shiny black flakes or granules, is a textile dye. This product is uniform and stable in colour and shows good permeability when dyeing. It is commonly used for dyeing on polyvinyl alcohol fibre and polyester. | |
| Sulphur Black Br 220% | Zhengding Shengguo Chemical Factory | Sulphur Black Br 220%, in the form of a black powdered granule, is a textile dye. This product is uniform and stable in colour and shows good permeability when dyeing. It is commonly used for dyeing on polyvinyl alcohol fibre and polyester. | |
| Sulphur Blue 150% | Zhengding Shengguo Chemical Factory | Sulphur Blue 150%, in the form of a shiny black granule, is a textile dye. This product is uniform and stable in colour and shows good permeability when dyeing. It is commonly used for dyeing on polyvinyl alcohol fibre and polyester. | |
| Sulphur Yellow Brown 5G 150% | Zhengding Shengguo Chemical Factory | Sulphur Yellow Brown 5G 150%, in the form of a yellowish brown granule, is a textile dye. This product is uniform and stable in colour and shows good permeability when dyeing. It is commonly used for dyeing on polyvinyl alcohol fibre and polyester. | |
| Sulphur Yellow GC 250% | Zhengding Shengguo Chemical Factory | Sulphur Yellow GC 250%, in the form of a yellow granule, is a textile dye. This product is uniform and stable in colour and shows good permeability when dyeing without any fragile treatment. It is commonly used for dyeing on polyvinyl alcohol fibre and po...展开 Sulphur Yellow GC 250%, in the form of a yellow granule, is a textile dye. This product is uniform and stable in colour and shows good permeability when dyeing without any fragile treatment. It is commonly used for dyeing on polyvinyl alcohol fibre and polyester. 收起 | |
| ASC Automatic Sample Changer | Anton Paar Viscosity & Rheology | 该ASC样品自动进样系统可一次同时全自动测量32个样品，包括测量系统的清洗。可按照实验室质量和精度进行质量控制和全流变学分析。 |  |
| FRS1600 Furnace Rheometer System | Anton Paar Viscosity & Rheology | 日常生活中所使用的材料，如玻璃和金属，是在超过1000 °C的条件下处理或精炼熔化的。为了确保最终产品的始终一致的高品质以及优化能源密集型的过程，懂得熔体粘度是非常重要的。该熔炉流变仪系统(FRS 1600)结合流变仪和实验室火炉可测量超过1600 °C。 |  |
| High-Throughput Rheometer HTR 301 | Anton Paar Viscosity & Rheology | HTR是第一台全自动流变仪。流变学测量是由高质量的MCR流变仪完成的，同时由一个机器人控制所有其他项目的测量。 |  |
| Lovis 2000 M/ME Rolling-Ball Viscometer | Anton Paar Viscosity & Rheology | Lovis 2000 M/ME是一款滚球式粘度计，通过透明或不透明的液体根据Hoepple的落球原则计算球的滚动时间。该方法只需要400微升的液体。结果可通过运动学粘度和动力学粘度呈现。该粘度计简洁经济，可节省实验室的空间。是Anton Paar’s AMVn自动粘度计的更新版本。 |  |
| MCR Rheometer Series | Anton Paar Viscosity & Rheology | 该新的MCR流变仪拥有最新的技术。EC运动技术，低摩擦的轴承以及专利的正交力传感器经过多年的优化可满足最高的流变要求。任何类型的或组合的流变测试，转动或振动模式，都可用MCR流变仪测量。该系统的模块化设计，可适合宽广的温度范围的装置和特定程序的应用。 |  |
| RheoLabQC Quality Control Rheometer | Anton Paar Viscosity & Rheology | RheolabQC 是一款迄今最先进的质量控制流变仪，也可用于研发。结合了无与伦比的性能，易于操作以及稳健设计于一身。可执行从单点快速检查流动曲线到屈服点确定等一系列复杂的流变控制。 |  |
| Rheometer Measuring Head | Anton Paar Viscosity & Rheology | 具有MCR流变仪性能的自定义流变测量仪器。其流变测量头可用于自动化操作或超过实验室流变仪要求的其他特殊测量目的。是工艺联合或建立自定义流变仪系统的完美方案。该模块装置包含一个配备有知名马达的测量头以及MCR系列的空气轴承，还有一个单独的控制单元。 |  |
| RheoPlus Rheometer Software | Anton Paar Viscosity & Rheology | 易于使用，灵活且功能强大 - RheoPlus软件用于所有Anton Paar流变仪，从质量控制仪器到高通量的流变仪。不同用户可轻松切换方法模块以及测量数据。该迄今为止最先进的软件可提供大量的模板，自动测量以及在RheoManager上处理数据，一个LIM/SAP界面，和21 CFR 的11章的兼容。 |  |
