| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展开 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展开 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| Andisil 1100 Silane | AB Specialty Silicones | Andisil 1100 Silane is an amino silane coupling agent. It is used to provide a bond between inorganic substrates and organic polymers. Andisil 1100 Silane is recommended for fiberglass reinforced composites. | |
| Andisil 1110 Silane | AB Specialty Silicones | Andisil 1110 Silane is an amino silane coupling agent. It is used to provide bonds between inorganic substrates and organic polymers. Andisil 1110 Silane is recommended for fiberglass reinforced composites. It can also be used as an adhesion promoter in R...展开 Andisil 1110 Silane is an amino silane coupling agent. It is used to provide bonds between inorganic substrates and organic polymers. Andisil 1110 Silane is recommended for fiberglass reinforced composites. It can also be used as an adhesion promoter in RTV silicones, ABC, PVC, and polystyrene. 收起 | |
| Andisil 1120 Silane | AB Specialty Silicones | Andisil 1120 Silane is an amino silane that is used as a coupling agent. It can be used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, and others. Acceptable polymers include bulyl, polyurethane ...展开 Andisil 1120 Silane is an amino silane that is used as a coupling agent. It can be used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, and others. Acceptable polymers include bulyl, polyurethane (2K), cellulosis, PVB, epoxy, silylated polyether, and more. 收起 | |
| Andisil 1122 Silane | AB Specialty Silicones | Andisil 1122 Silane is a diamine functional silane coupling agent. It is used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, etc. Andisil 1122 Silane can be used with polymers such as bulyl, poly...展开 Andisil 1122 Silane is a diamine functional silane coupling agent. It is used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, etc. Andisil 1122 Silane can be used with polymers such as bulyl, polyurethane (2K), cellulosis, PVB, epoxy, silylated polyether, silylated polyurethane, nulamine, and others. 收起 | |
| Andisil 1130 Silane | AB Specialty Silicones | Andisil 1130 Silane is a triamine functional propyltrimethoxysilane coupling agent. It is used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, etc. Andisil 1130 Silane can be used with polymers su...展开 Andisil 1130 Silane is a triamine functional propyltrimethoxysilane coupling agent. It is used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, etc. Andisil 1130 Silane can be used with polymers such as bulyl, polyurethane (2K), cellulosis, PVB, epoxy, silylated polyether, silylated polyurethane, nulamine, and others. 收起 | |
| Andisil 1170 Silane | AB Specialty Silicones | Andisil 1170 Silane is a bis(trimethoxysilylpropyl)amine amino silane. It is used as an adhesive and sealant. | |
| Andisil 1289 Silane | AB Specialty Silicones | Andisil 1289 Silane is a colorless to pale yellow transparent liquid sulfur silane. It is a bifunctional polysulfide silane used as an adhesion promoter for precious metals. Andisil 1289 Silane can also be used as a coupling agent and vulcanizing agent fo...展开 Andisil 1289 Silane is a colorless to pale yellow transparent liquid sulfur silane. It is a bifunctional polysulfide silane used as an adhesion promoter for precious metals. Andisil 1289 Silane can also be used as a coupling agent and vulcanizing agent for rubbers. 收起 | |
| Andisil 151 Silane | AB Specialty Silicones | Andisil 151 Silane is a colorless, transparent liquid vinyl silane. It is a coupling agent in filled polymer systems. Andisil 151 Silane can also be used as a finish for glass or a binder additive in glass reinforced resins. | |
| Andisil 171 Silane | AB Specialty Silicones | Andisil 171 Silane is a colorless, transparent liquid vinyl silane. It can be used as a crosslinking agent, adhesion promoter, and/or surfaces modifier since it can bind chemically with both inorganic and organic polymers. Andisil 171 Silane improves adhe...展开 Andisil 171 Silane is a colorless, transparent liquid vinyl silane. It can be used as a crosslinking agent, adhesion promoter, and/or surfaces modifier since it can bind chemically with both inorganic and organic polymers. Andisil 171 Silane improves adhesion between glass, mineral, and metal surfaces and provides elongation, flexibility, and spreading. 收起 | |
| Andisil 172 Silane | AB Specialty Silicones | Andisil 172 Silane is a colorless or light yellow liquid vinyl silane. It is used as a coupling agent and is easily dissolved in water. Andisil 172 Silane is mainly used in mineral-filled EPM and EPDM cables. Andisil 172 Silane is also used as an adhesion...展开 Andisil 172 Silane is a colorless or light yellow liquid vinyl silane. It is used as a coupling agent and is easily dissolved in water. Andisil 172 Silane is mainly used in mineral-filled EPM and EPDM cables. Andisil 172 Silane is also used as an adhesion promoter in primers and coatings. 收起 | |
| Andisil 174 Silane | AB Specialty Silicones | Andisil 174 Silane is a methacryl-functional silane adhesion promoter. It can be used as a strength improver in reinforced polyester composites and reinforced polyester resin composites. Andisil 174 Silane can also be used as a coupling agent, crosslinkin...展开 Andisil 174 Silane is a methacryl-functional silane adhesion promoter. It can be used as a strength improver in reinforced polyester composites and reinforced polyester resin composites. Andisil 174 Silane can also be used as a coupling agent, crosslinking agent, and blend additive. 收起 | |
| Andisil 187 Silane | AB Specialty Silicones | Andisil 187 Silane is an epoxy functional silane coupling agent. It is used for unsaturated polyester-fiberglass composites and for polysulfide/polyurethane caulks & sealants. Andisil 187 Silane can be used in waterborne acrylic sealants and epoxy coating...展开 Andisil 187 Silane is an epoxy functional silane coupling agent. It is used for unsaturated polyester-fiberglass composites and for polysulfide/polyurethane caulks & sealants. Andisil 187 Silane can be used in waterborne acrylic sealants and epoxy coatings. 收起 | |
| Andisil 189 Silane | AB Specialty Silicones | Andisil 189 Silane is a colorless to pale yellow transparent liquid sulfur silane. It is a mercapto-functional silane coupling agent for polysulfide and polyurethane caulks and sealants. Andisil 189 Silane improves adhesion to glass and metal surfaces. | |
| Andisil 1891 Silane | AB Specialty Silicones | Andisil 1891 Silane is a colorless to pale yellow transparent liquid sulfur silane. It is a mercapto-functional silane coupling agent for polysulfide and polyurethane caulks and sealants. Andisil 1891 Silane can be chemically bonded with materials such as...展开 Andisil 1891 Silane is a colorless to pale yellow transparent liquid sulfur silane. It is a mercapto-functional silane coupling agent for polysulfide and polyurethane caulks and sealants. Andisil 1891 Silane can be chemically bonded with materials such as silica, clay, mica, and talc. 收起 | |
| Andisil 2100 Silane | AB Specialty Silicones | Andisil 2100 Silane is an aminopropylmethyldiethoxysilane coupling agent. This product is mainly used for foundry resins. | |
| Andisil 2120 Silane | AB Specialty Silicones | Andisil 2120 Silane is a diamino-functional silane that provides elongation, flexibility, and spreading at the interface as a coupling agent. It is used to improve adhesion between glass, mineral, and metal surface and aminoreactive resins. | |
| Andisil 6041 Silane | AB Specialty Silicones | Andisil 6041 Silane is a glycidoxy (epoxy) -functional silane coupling agent. It can be used for unsaturated polyester-fiberglass composites, polysulfide & polyurethane caulks and sealants, and glass roving size-binders. Andisil 6041 Silane can also be us...展开 Andisil 6041 Silane is a glycidoxy (epoxy) -functional silane coupling agent. It can be used for unsaturated polyester-fiberglass composites, polysulfide & polyurethane caulks and sealants, and glass roving size-binders. Andisil 6041 Silane can also be used in waterborne systems and is suitable for many polymers. 收起 | |
| Araldite® GT 2874 | Jubail Chemical Industries Co. | Araldite® GT 2874 is a solid flow agent master batch epoxy resin. This product is used to facilitate the incorporation of a liquid flow agent in powder coatings during manufacture. | |
| Araldite® GT 6084 | Jubail Chemical Industries Co. | Araldite® GT 6084 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its ability to take on specific properties depending on with what it is combined with. Araldite® GT 6084 is designed for use in solvent-containing ...展开 Araldite® GT 6084 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its ability to take on specific properties depending on with what it is combined with. Araldite® GT 6084 is designed for use in solvent-containing coatings if it is combined with fatty acids and powder coatings if it is combined with specific curing agents. 收起 | |
| Araldite® GT 6099 | Jubail Chemical Industries Co. | Araldite® GT 6099 is a high molecular weight, solid epoxy resin based on Bisphenol A. This product is characterized by its deep-drawing capability, flexibility, impact resistance, and chemical resistance. Araldite® GT 6099 is used in the formulation of he...展开 Araldite® GT 6099 is a high molecular weight, solid epoxy resin based on Bisphenol A. This product is characterized by its deep-drawing capability, flexibility, impact resistance, and chemical resistance. Araldite® GT 6099 is used in the formulation of heat-curing primers and enamels as well as anti-corrosion paints when combined with polyisocyanates. 收起 | |
| Araldite® GT 6609 | Jubail Chemical Industries Co. | Araldite® GT 6609 is a high melt viscosity, unmodified epoxy resin based on Bisphenol A. This product is characterized by its low viscosity, flexibility, impact resistance, and chemical resistance. Araldite® GT 6609 is used in the formulation of baking pr...展开 Araldite® GT 6609 is a high melt viscosity, unmodified epoxy resin based on Bisphenol A. This product is characterized by its low viscosity, flexibility, impact resistance, and chemical resistance. Araldite® GT 6609 is used in the formulation of baking primers and enamels as well as cold-curing coatings when combined with polyisocyanates. 收起 | |
| Araldite® GT 6750 | Jubail Chemical Industries Co. | Araldite® GT 6750 is a solid, high flow epoxy resin based on Bisphenol A. This product is characterized by its melt viscosity. Araldite® GT 6750 is designed for use in the formulation of thin film hybrid powder coatings. | |
| Araldite® GT 7004 | Jubail Chemical Industries Co. | Araldite® GT 7004 is a solid, medium molecular weight epoxy resin based on Bisphenol A. This product is characterized by its melt viscosity, pigment ability, storage stability, flow, gloss, and mechanical properties. Araldite® GT 7004 is designed for use ...展开 Araldite® GT 7004 is a solid, medium molecular weight epoxy resin based on Bisphenol A. This product is characterized by its melt viscosity, pigment ability, storage stability, flow, gloss, and mechanical properties. Araldite® GT 7004 is designed for use in powder coatings. 收起 | |
| Araldite® GT 7013 | Jubail Chemical Industries Co. | Araldite® GT 7013 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, electrical properties, corrosion resistance, gloss, adhesion properties, and filler loading. Araldite® GT 7013 is design...展开 Araldite® GT 7013 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, electrical properties, corrosion resistance, gloss, adhesion properties, and filler loading. Araldite® GT 7013 is designed for use in general and decorative coatings for metal furniture. 收起 | |
| Araldite® GT 7014 | Jubail Chemical Industries Co. | Araldite® GT 7014 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, electrical properties, corrosion resistance, gloss, adhesion properties, and filler loadings. Araldite® GT 7014 is desig...展开 Araldite® GT 7014 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, electrical properties, corrosion resistance, gloss, adhesion properties, and filler loadings. Araldite® GT 7014 is designed for use in coating systems in which high chemical resistance is important, metal coatings, tube coatings, and pipe coatings. 收起 | |
| Araldite® GT 7071 | Jubail Chemical Industries Co. | Araldite® GT 7071 is a low melting, solid, unmodified epoxy resin based on Bisphenol A with a narrow molecular weight distribution. This product is characterized by its flexibility, impact strength, chemical resistance, corrosion resistance, and adhesion ...展开 Araldite® GT 7071 is a low melting, solid, unmodified epoxy resin based on Bisphenol A with a narrow molecular weight distribution. This product is characterized by its flexibility, impact strength, chemical resistance, corrosion resistance, and adhesion properties. Araldite® GT 7071 is designed for use in the formulation of protective coating systems and decorative coating systems. 收起 | |
| Araldite® GT 7072 | Jubail Chemical Industries Co. | Araldite® GT 7072 is a solid, unmodified epoxy resin based on Bisphenol A with a narrow molecular weight distribution. This product is characterized by its flexibility, impact strength, chemical resistance, corrosion resistance, and adhesion properties. A...展开 Araldite® GT 7072 is a solid, unmodified epoxy resin based on Bisphenol A with a narrow molecular weight distribution. This product is characterized by its flexibility, impact strength, chemical resistance, corrosion resistance, and adhesion properties. Araldite® GT 7072 is designed for use in high performance coating systems. 收起 | |
| Araldite® GT 7074 | Jubail Chemical Industries Co. | Araldite® GT 7074 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, chemical resistance, corrosion resistance, and electrical properties. Araldite® GT 7074 is designed for use in the formu...展开 Araldite® GT 7074 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, chemical resistance, corrosion resistance, and electrical properties. Araldite® GT 7074 is designed for use in the formulation of functional powder coating systems like pipe and rebar applications. 收起 | |
| Araldite® GT 7097 | Jubail Chemical Industries Co. | Araldite® GT 7097 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its flow, wetting properties, gloss, adhesion properties, and flexibility as well as its resistance to chemicals, solvents, water, and corrosion. A...展开 Araldite® GT 7097 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its flow, wetting properties, gloss, adhesion properties, and flexibility as well as its resistance to chemicals, solvents, water, and corrosion. Araldite® GT 7097 is used in the formulation of metal decorating finishes, can and coil coatings, primers and enamels, metal furniture finishes, and primers. 收起 | |
| Araldite® GT 7255 | Jubail Chemical Industries Co. | Araldite® GT 7255 is a solid epoxy resin based on Bisphenol A and Novolak. This product is characterized by its reactivity, electrical properties, corrosion resistance, chemical resistance, heat resistance, edge coverage, and adhesion properties. Araldite...展开 Araldite® GT 7255 is a solid epoxy resin based on Bisphenol A and Novolak. This product is characterized by its reactivity, electrical properties, corrosion resistance, chemical resistance, heat resistance, edge coverage, and adhesion properties. Araldite® GT 7255 is used in the formulation of powder coatings most suitable for rebar and pipe applications. 收起 | |
| Araldite® GY 250 | Jubail Chemical Industries Co. | Araldite® GY 250 is a universal purpose, unmodified, medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties and resistance to chemicals. Araldite® GY 250 is suitable for the formulation of solvent-fre...展开 Araldite® GY 250 is a universal purpose, unmodified, medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties and resistance to chemicals. Araldite® GY 250 is suitable for the formulation of solvent-free coatings, self-leveling and mortar, flooring screeds, toweling compounds etc. when cured with polyamines, polyamidoamines or their adducts. 收起 | |
| Araldite® GY 257 | Jubail Chemical Industries Co. | Araldite® GY 257 is a low viscosity epoxy resin based on Bisphenol A modified with an aromatic glycidyl ether. This product is characterized by its processing properties, mechanical properties, surface penetration, and resistance to chemicals, water, and ...展开 Araldite® GY 257 is a low viscosity epoxy resin based on Bisphenol A modified with an aromatic glycidyl ether. This product is characterized by its processing properties, mechanical properties, surface penetration, and resistance to chemicals, water, and acid. Araldite® GY 257 is used in the formulation of solvent-free coatings and structure adhesives. 收起 | |
| Araldite® GY 6010 | Jubail Chemical Industries Co. | Araldite® GY 6010 is a general purpose, unmodified, medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its reactivity, compatibility, and low hydrolysable chlorine content. Araldite® GY 6010 is used in the formulation of c...展开 Araldite® GY 6010 is a general purpose, unmodified, medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its reactivity, compatibility, and low hydrolysable chlorine content. Araldite® GY 6010 is used in the formulation of chemical resistant coatings and matrix adhesives. 收起 | |
| Araldite® GY 6010 CSR | Jubail Chemical Industries Co. | Araldite® GY 6010 CSR is a general purpose, unmodified, low to medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its reactivity, compatibility, and low hydrolysable chlorine content. Araldite® GY 6010 CSR is used in the f...展开 Araldite® GY 6010 CSR is a general purpose, unmodified, low to medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its reactivity, compatibility, and low hydrolysable chlorine content. Araldite® GY 6010 CSR is used in the formulation of chemical resistant coatings and matrix adhesives. 收起 | |
| Araldite® GY 6020 | Jubail Chemical Industries Co. | Araldite® GY 6020 is an unmodified, high viscosity epoxy resin based on Bisphenol A. This product is characterized by its adhesion properties and flexibility as well as its resistance to chemicals and water. Araldite® GY 6020 is used in the formulation of...展开 Araldite® GY 6020 is an unmodified, high viscosity epoxy resin based on Bisphenol A. This product is characterized by its adhesion properties and flexibility as well as its resistance to chemicals and water. Araldite® GY 6020 is used in the formulation of filament adhesives. 收起 | |
| Araldite® GZ 280 X 80 | Jubail Chemical Industries Co. | Araldite® GZ 280 X 80 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 80% in Xylene. This product is characterized by its ability to improve the chemical resistance and mechanical properties in end products. Araldite® GZ 280 X 80 is ...展开 Araldite® GZ 280 X 80 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 80% in Xylene. This product is characterized by its ability to improve the chemical resistance and mechanical properties in end products. Araldite® GZ 280 X 80 is used in the formulation for primers and finishing paints applied on metal substrates. 收起 | |
| Araldite® GZ 471 X 75 | Jubail Chemical Industries Co. | Araldite® GZ 471 X 75 is a medium molecular weight epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its ability to improve mechanical properties and chemical resistance in end products. Araldite® GZ 471 X 7...展开 Araldite® GZ 471 X 75 is a medium molecular weight epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its ability to improve mechanical properties and chemical resistance in end products. Araldite® GZ 471 X 75 is used in the formulation of acrylic resin system coatings, marine maintenance, and protective coatings applications. 收起 | |
| Araldite® GZ 7071 X 75 | Jubail Chemical Industries Co. | Araldite® GZ 7071 X 75 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, and resistance to salt water. Araldite® GZ 70...展开 Araldite® GZ 7071 X 75 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, and resistance to salt water. Araldite® GZ 7071 X 75 is used in the formulation for adhesive primers, anti-corrosive primers, zinc dust primers, top coats, and clear lacquers. 收起 | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展开 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起 | |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展开 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| Industrial Grade Zinc Oxide | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Industrial Grade Zinc Oxide is a white, small grain zinc oxide used in production of products like Zinc stearate, zinc bromide, zinc borate, phosphatizing liquid, as well as used in preparation of electroplate liquid. | |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展开 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起 | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展开 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起 | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展开 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展开 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起 | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展开 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Nano Silver Powder TFNP-30 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry. | |
| Nano Silver Powder TFNP-80 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material. | |
| ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. | |
| Polyvinyl Alcohol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Polyvinyl alcohol is an important chemical raw materials for the manufacture of polyvinyl acetal, resistance to gasoline pipelines and vinylon synthetic fibers, fabric treatment agents, emulsifiers, paper coatings, adhesives, glues and so on. | |
| Precipitated Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...展开 Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. 收起 | |
| PVB | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PV...展开 Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PVB has high transparency, good cold resistance, water resistance, film forming properties and impact resistance, widely used in middle film of glass, ceramic flower paper, metal protective paint, tipping paper, aluminum foil, insulation paint, fiber treatment agent, finished parts, printing inks, dyes and so on. 收起 | |
| Razeen® 6138 | Jubail Chemical Industries Co. | Razeen® 6138 is a semi-solid phenol novolac based multifunctional epoxy resin. This product is characterized by its viscosity and its ability to improve the chemical resistance and mechanical properties in end products. Razeen® 6138 is used in marine and ...展开 Razeen® 6138 is a semi-solid phenol novolac based multifunctional epoxy resin. This product is characterized by its viscosity and its ability to improve the chemical resistance and mechanical properties in end products. Razeen® 6138 is used in marine and protective coatings, chemical resistant coatings, adhesives, and coil coatings. 收起 | |
| Razeen® LR 1100 | Jubail Chemical Industries Co. | Razeen® LR 1100 is a general purpose, unmodified epoxy resin based on Bisphenol A. This product is characterized by its viscosity, reactivity, compatibility, and hydrolysable chlorine content. Razeen® LR 1100 is used in the formulation of highly chemical ...展开 Razeen® LR 1100 is a general purpose, unmodified epoxy resin based on Bisphenol A. This product is characterized by its viscosity, reactivity, compatibility, and hydrolysable chlorine content. Razeen® LR 1100 is used in the formulation of highly chemical resistant coatings and matrix adhesives. 收起 | |
| Razeen® LR 1110 | Jubail Chemical Industries Co. | Razeen® LR 1110 is a general purpose, unmodified epoxy resin based on Bisphenol A. This product is characterized by its low viscosity, high purity, reactivity, compatibility, and hydrolysable chlorine content. Razeen® LR 1110 is used in the formulation of...展开 Razeen® LR 1110 is a general purpose, unmodified epoxy resin based on Bisphenol A. This product is characterized by its low viscosity, high purity, reactivity, compatibility, and hydrolysable chlorine content. Razeen® LR 1110 is used in the formulation of electro-deposition primers used in the automotive industry, as well as the production of UV cure epoxy acrylates. 收起 | |
| Razeen® LR 1120 | Jubail Chemical Industries Co. | Razeen® LR 1120 is an unmodified epoxy resin based on Bisphenol A. This product is characterized by its very low viscosity, high purity, reactivity, compatibility, and hydrolysable chlorine content. Razeen® LR 1120 is used in the formulation of high solid...展开 Razeen® LR 1120 is an unmodified epoxy resin based on Bisphenol A. This product is characterized by its very low viscosity, high purity, reactivity, compatibility, and hydrolysable chlorine content. Razeen® LR 1120 is used in the formulation of high solids chemical resistant coatings, matrix adhesives, and UV cur epoxy acrylates. 收起 | |
| Razeen® LR 1140-B | Jubail Chemical Industries Co. | Razeen® LR 1140-B is an unmodified epoxy resin based on Bisphenol A. This product is characterized by its very low viscosity, high purity, reactivity, compatibility, and hydrolysable chlorine content. Razeen® LR 1140-B is used in the formulation of high s...展开 Razeen® LR 1140-B is an unmodified epoxy resin based on Bisphenol A. This product is characterized by its very low viscosity, high purity, reactivity, compatibility, and hydrolysable chlorine content. Razeen® LR 1140-B is used in the formulation of high solids chemical resistant coatings, matrix adhesives, and UV cur epoxy acrylates. 收起 | |
| Razeen® LR 1150 | Jubail Chemical Industries Co. | Razeen® LR 1150 is a general purpose, unmodified, medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties and resistance to chemicals. Razeen® LR 1150 is used in the formulation of solvent-free coating...展开 Razeen® LR 1150 is a general purpose, unmodified, medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties and resistance to chemicals. Razeen® LR 1150 is used in the formulation of solvent-free coatings. 收起 | |
| Razeen® LR 1160 | Jubail Chemical Industries Co. | Razeen® LR 1160 is a liquid, unmodified, medium to high viscosity epoxy resin based on Bisphenol A. This product is characterized by its extremely low chlorine content. Razeen® LR 1160 is used in the formulation of automotive body coatings. | |
| Razeen® LR 1166 | Jubail Chemical Industries Co. | Razeen® LR 1166 is a general purpose, low viscosity epoxy resin based on Bisphenol A. This product is characterized by its extremely low chlorine content. Razeen® LR 1166 is used in the formulation of automotive body coatings. | |
| Razeen® LR 1170 | Jubail Chemical Industries Co. | Razeen® LR 1170 is a general purpose, unmodified, medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties and resistance to chemicals. Razeen® LR 1170 is used in the formulation of solvent-free coating...展开 Razeen® LR 1170 is a general purpose, unmodified, medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties and resistance to chemicals. Razeen® LR 1170 is used in the formulation of solvent-free coatings. 收起 | |
| Razeen® LR 2253 | Jubail Chemical Industries Co. | Razeen® LR 2253 is a low viscosity epoxy resin based on Bisphenol A modified with an aliphatic diglycidyl ether. This product is characterized by its reactivity, surface hardness, flexibility, solvent resistance, and alkali resistance. Razeen® LR 2253 is ...展开 Razeen® LR 2253 is a low viscosity epoxy resin based on Bisphenol A modified with an aliphatic diglycidyl ether. This product is characterized by its reactivity, surface hardness, flexibility, solvent resistance, and alkali resistance. Razeen® LR 2253 is used in the formulation of solvent-free coatings. 收起 | |
| Razeen® LR 2254 | Jubail Chemical Industries Co. | Razeen® LR 2254 is a low viscosity epoxy resin based on Bisphenol A modified with an aliphatic monoglycidyl ether. This product is characterized by its diluting properties. Razeen® LR 2254 is used in the formulation of solvent-free coatings and structural...展开 Razeen® LR 2254 is a low viscosity epoxy resin based on Bisphenol A modified with an aliphatic monoglycidyl ether. This product is characterized by its diluting properties. Razeen® LR 2254 is used in the formulation of solvent-free coatings and structural adhesives. 收起 | |
| Razeen® LR 2257 | Jubail Chemical Industries Co. | Razeen® LR 2257 is a low viscosity epoxy resin based on Bisphenol A modified with an aromatic glycidyl ether. This product is characterized by its processing properties, mechanical performance, surface penetration, and its resistance to chemicals, acid, a...展开 Razeen® LR 2257 is a low viscosity epoxy resin based on Bisphenol A modified with an aromatic glycidyl ether. This product is characterized by its processing properties, mechanical performance, surface penetration, and its resistance to chemicals, acid, and solvents. Razeen® LR 2257 is used in the formulation of solvent-free coatings and structural adhesives. 收起 | |
| Razeen® LR 2280 | Jubail Chemical Industries Co. | Razeen® LR 2280 is a high viscosity, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties and chemical resistance. Razeen® LR 2280 is used in the formulation of anti-corrosion coatings, spray applied seal...展开 Razeen® LR 2280 is a high viscosity, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties and chemical resistance. Razeen® LR 2280 is used in the formulation of anti-corrosion coatings, spray applied sealer lacquers, and primers and finishing paints for metal substrates. 收起 | |
| Razeen® LR 2282 | Jubail Chemical Industries Co. | Razeen® LR 2282 is a liquid, general purpose, unmodified epoxy resin based on Bisphenol F . This product is characterized by its viscosity, reactivity, compatibility, and low hydrolysable chlorine content. Razeen® LR 2282 is used in chemical resistant coa...展开 Razeen® LR 2282 is a liquid, general purpose, unmodified epoxy resin based on Bisphenol F . This product is characterized by its viscosity, reactivity, compatibility, and low hydrolysable chlorine content. Razeen® LR 2282 is used in chemical resistant coatings and matrix adhesives. 收起 | |
| Razeen® LR 2302 | Jubail Chemical Industries Co. | Razeen® LR 2302 is a liquid epoxy resin based on Bisphenol A/F . This product is characterized by its viscosity and low shrinkage of cure films as well as its ability to improve mechanical properties and chemical resistance in end products. Razeen® LR 230...展开 Razeen® LR 2302 is a liquid epoxy resin based on Bisphenol A/F . This product is characterized by its viscosity and low shrinkage of cure films as well as its ability to improve mechanical properties and chemical resistance in end products. Razeen® LR 2302 is used in solvent-free coatings, high solids coatings, and protective coatings. 收起 | |
| Razeen® LR 2308 | Jubail Chemical Industries Co. | Razeen® LR 2308 is a hydrogenated Bisphenol A based cycloaliphatic epoxy resin. This product is characterized by its UV resistance. It has an epoxy equivalent weight of 230-260 and a denisty of 1.14. Razeen® LR 2308 is used in outdoor applications, mainte...展开 Razeen® LR 2308 is a hydrogenated Bisphenol A based cycloaliphatic epoxy resin. This product is characterized by its UV resistance. It has an epoxy equivalent weight of 230-260 and a denisty of 1.14. Razeen® LR 2308 is used in outdoor applications, maintenance coatings, decorative paints, and acrylic finishes. 收起 | |
| Razeen® LR 2310 | Jubail Chemical Industries Co. | Razeen® LR 2310 is a hydrogenated Bisphenol A based cycloaliphatic epoxy resin. This product is characterized by its UV resistance. It has an epoxy equivalent weight of 130-150 and a denisty of 1.17. Razeen® LR 2310 is used in outdoor applications, mainte...展开 Razeen® LR 2310 is a hydrogenated Bisphenol A based cycloaliphatic epoxy resin. This product is characterized by its UV resistance. It has an epoxy equivalent weight of 130-150 and a denisty of 1.17. Razeen® LR 2310 is used in outdoor applications, maintenance coatings, decorative paints, and acrylic finishes. 收起 | |
| Razeen® LR 2350 | Jubail Chemical Industries Co. | Razeen® LR 2350 is a general purpose, modified epoxy resin based on Bisphenol A and F. This product is characterized by its ability to improve chemical resistance and mechanical properties in end products. Razeen® LR 2350 is used in solvent-free coatings. | |
| Razeen® LR 2351 | Jubail Chemical Industries Co. | Razeen® LR 2351 is a general purpose, modified epoxy resin based on Bisphenol A and Bisphenol F. This product is characterized by its mechanical properties and chemical resistance. Razeen® LR 2351 is used in the formulation of solvent-free coatings. | |
| Razeen® LR 2352 | Jubail Chemical Industries Co. | Razeen® LR 2352 is a liquid epoxy resin based on Bisphenol A and F. This product is characterized by its adhesion properties. It has an epoxy equivalent weight of 170-185 and a denisty of 1.17. Razeen® LR 2352 is used in solvent-free and high solids coati...展开 Razeen® LR 2352 is a liquid epoxy resin based on Bisphenol A and F. This product is characterized by its adhesion properties. It has an epoxy equivalent weight of 170-185 and a denisty of 1.17. Razeen® LR 2352 is used in solvent-free and high solids coatings. 收起 | |
| Razeen® LR 2740 | Jubail Chemical Industries Co. | Razeen® LR 2740 is a liquid epoxy resin based on Bisphenol A and F. This product is characterized by its viscosity and that is modified with mono-functional reactive diluent. It has an epoxy equivalent weight of 190-210 and a denisty of 1.14. Razeen® LR 2...展开 Razeen® LR 2740 is a liquid epoxy resin based on Bisphenol A and F. This product is characterized by its viscosity and that is modified with mono-functional reactive diluent. It has an epoxy equivalent weight of 190-210 and a denisty of 1.14. Razeen® LR 2740 is used in high solids coatings and adhesives. 收起 | |
| Razeen® LR 2783 | Jubail Chemical Industries Co. | Razeen® LR 2783 is a liquid epoxy resin based on Bisphenol A and F. This product is characterized by its viscosity, processing properties, mechanical properties, surface penetration, and chemical resistance. Razeen® LR 2783 is used in solvent-free coating...展开 Razeen® LR 2783 is a liquid epoxy resin based on Bisphenol A and F. This product is characterized by its viscosity, processing properties, mechanical properties, surface penetration, and chemical resistance. Razeen® LR 2783 is used in solvent-free coatings and structural adhesives. 收起 | |
| Razeen® LR 2810 | Jubail Chemical Industries Co. | Razeen® LR 2810 is a liquid epoxy resin based on Bisphenol A and F. This product is characterized by its viscosity, reactivity, surface hardness, flexibility, organic solvent resistance, and alkali resistance. Razeen® LR 2810 is used in solvent-free coati...展开 Razeen® LR 2810 is a liquid epoxy resin based on Bisphenol A and F. This product is characterized by its viscosity, reactivity, surface hardness, flexibility, organic solvent resistance, and alkali resistance. Razeen® LR 2810 is used in solvent-free coatings and structural adhesives. 收起 | |
| Razeen® S 7103 | Jubail Chemical Industries Co. | Razeen® S 7103 is a bi-functional aliphatic reactive diluent based on Propylenglycol diglycidyl ether. This product is characterized by its ability to increase flexibility in end products. It has an epoxy equivalent weight of 320-450 and a density of 1.04...展开 Razeen® S 7103 is a bi-functional aliphatic reactive diluent based on Propylenglycol diglycidyl ether. This product is characterized by its ability to increase flexibility in end products. It has an epoxy equivalent weight of 320-450 and a density of 1.04. Razeen® S 7103 is used in epoxy resin systems. 收起 | |
| Razeen® S 7105 | Jubail Chemical Industries Co. | Razeen® S 7105 is a mono-functional aliphatic reactive diluent based on ortho cresyl glycidyl ether. This product is characterized by its ability to increase flexibility in end products. It has an epoxy equivalent weight of 175-190 and a density of 1.06. ...展开 Razeen® S 7105 is a mono-functional aliphatic reactive diluent based on ortho cresyl glycidyl ether. This product is characterized by its ability to increase flexibility in end products. It has an epoxy equivalent weight of 175-190 and a density of 1.06. Razeen® S 7105 is used in epoxy resin systems. 收起 | |
| Razeen® S 7106 | Jubail Chemical Industries Co. | Razeen® S 7106 is a mono-functional aliphatic reactive diluent based on C12-C14 alkyl glycidyl ether. This product is characterized by its ability to increase flexibility in end products. It has an epoxy equivalent weight of 300-340 and a density of .89. ...展开 Razeen® S 7106 is a mono-functional aliphatic reactive diluent based on C12-C14 alkyl glycidyl ether. This product is characterized by its ability to increase flexibility in end products. It has an epoxy equivalent weight of 300-340 and a density of .89. Razeen® S 7106 is used in epoxy resin systems. 收起 | |
| Razeen® S 7106 HP | Jubail Chemical Industries Co. | Razeen® S 7106 HP is a mono-functional aliphatic reactive diluent based on high purity C12-C14 alkyl glycidyl ether. This product is characterized by its ability to increase flexibility in end products. It has an epoxy equivalent weight of 270-305 and a d...展开 Razeen® S 7106 HP is a mono-functional aliphatic reactive diluent based on high purity C12-C14 alkyl glycidyl ether. This product is characterized by its ability to increase flexibility in end products. It has an epoxy equivalent weight of 270-305 and a density of .89. Razeen® S 7106 HP is used in epoxy resin systems. 收起 |
