UL Prospector

成功!

成功保存搜索结果
3132 SCARLET RED Zhejiang Baihe Chemical Holding Group Company 3132 SCARLET RED is a red pigment that has strong color strength, high covering capabilities and good dispersion. This product has an oil absorption of 35-45 ml/100g and a pH value of 6-7. It can be used in industrial paints and water based inks.
BENZIDINE YELLOW 215 Zhejiang Baihe Chemical Holding Group Company BENZIDINE YELLOW 215 is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for all applications where a moderate light fastness is appropriate, such as textile printing, offset ...展开 BENZIDINE YELLOW 215 is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for all applications where a moderate light fastness is appropriate, such as textile printing, offset inks and water based inks. 收起
BENZIDINE YELLOW 3025 Zhejiang Baihe Chemical Holding Group Company BENZIDINE YELLOW 3025 is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for use in offset inks.
BENZIDINE YELLOW BHT Zhejiang Baihe Chemical Holding Group Company BENZIDINE YELLOW BHT is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for offset inks and is also suitable for PA inks, PP inks and NC inks.
BENZIDINE YELLOW OF-15 Zhejiang Baihe Chemical Holding Group Company BENZIDINE YELLOW OF-15 is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for offset inks, water based inks, PA inks and PVC.
BENZIDINE YELLOW OF-15B Zhejiang Baihe Chemical Holding Group Company BENZIDINE YELLOW OF-15B is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for offset inks and PP inks.
BENZIDINE YELLOW OF-15C Zhejiang Baihe Chemical Holding Group Company BENZIDINE YELLOW OF-15C is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for all applications where a moderate light fastness is appropriate, such as textile printing, offs...展开 BENZIDINE YELLOW OF-15C is a diarylide aniline yellow pigment. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is recommended for all applications where a moderate light fastness is appropriate, such as textile printing, offset inks and PVC. 收起
BENZIDINE YELLOW PA-12 Zhejiang Baihe Chemical Holding Group Company BENZIDINE YELLOW PA-12 is a diarylide aniline yellow pigment with high transparency and good resistance to solvents. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is especially recommended for solvent based printing ink app...展开 BENZIDINE YELLOW PA-12 is a diarylide aniline yellow pigment with high transparency and good resistance to solvents. This product has an oil absorption of 40-50 ml/100g and a pH value of 6-7. It is especially recommended for solvent based printing ink applications such as PA inks and NC inks. 收起
BRILLIANT FAST RED 688 Zhejiang Baihe Chemical Holding Group Company BRILLIANT FAST RED 688 is a red pigment with strong color strength. This product has an oil absorption of 45-55 ml/100g and a pH value of 6-7. It is recommended for textile printing and water based inks.
CAB-151-0.7 Jiangsu Ruijia Chemistry Co.,Ltd. CAB-151-0.7 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in p...展开 CAB-151-0.7 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起
CAB-381-0.1 Jiangsu Ruijia Chemistry Co.,Ltd. CAB-381-0.1 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in ...展开 CAB-381-0.1 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起
CAB-381-0.5 Jiangsu Ruijia Chemistry Co.,Ltd. CAB-381-0.5 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printin...展开 CAB-381-0.5 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起
CAB-381-2 Jiangsu Ruijia Chemistry Co.,Ltd. CAB-381-2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing ...展开 CAB-381-2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起
CAB-381-20 Jiangsu Ruijia Chemistry Co.,Ltd. CAB-381-20 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in pr...展开 CAB-381-20 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起
CAB-551-0.01 Jiangsu Ruijia Chemistry Co.,Ltd. CAB-551-0.01 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printi...展开 CAB-551-0.01 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起
CAB-551-0.2 Jiangsu Ruijia Chemistry Co.,Ltd. CAB-551-0.2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printin...展开 CAB-551-0.2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起
CYANINE BLUE 156 Zhejiang Baihe Chemical Holding Group Company CYANINE BLUE 156 is a phthalocyanine pigment with strong color strength. This product has an oil absorption of 35-45 ml/100g and a pH value of 7-8. It is recommended for offset inks, UV inks, industrial paint, and water based decorative paint.
CYANINE BLUE 191 Zhejiang Baihe Chemical Holding Group Company CYANINE BLUE 191 is a phthalocyanine pigment with strong color strength. This product has an oil absorption of 35-45 ml/100g and a pH value of 7-8. It is often used in industrial paint and offset inks.
CYANINE BLUE 263 Zhejiang Baihe Chemical Holding Group Company CYANINE BLUE 263 is a phthalocyanine pigment with strong color strength. This product has an oil absorption of 35-45 ml/100g and a pH value of 7.5-8.5. It is recommended for offset inks, PP inks and PVC.
CYANINE BLUE 952 Zhejiang Baihe Chemical Holding Group Company CYANINE BLUE 952 is a phthalocyanine pigment with low viscosity and strong color strength. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, coil coating, powder coating, solvent based d...展开 CYANINE BLUE 952 is a phthalocyanine pigment with low viscosity and strong color strength. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, coil coating, powder coating, solvent based decorative paint, PA inks and NC inks. 收起
CYANINE GREEN 311 Zhejiang Baihe Chemical Holding Group Company CYANINE GREEN 311 is a phthalocyanine pigment with strong color strength. This product has an oil absorption of 40-50 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, textile printing, water based inks, water or solvent based dec...展开 CYANINE GREEN 311 is a phthalocyanine pigment with strong color strength. This product has an oil absorption of 40-50 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, textile printing, water based inks, water or solvent based decorative paint, and offset inks. 收起
CYANINE GREEN 312 Zhejiang Baihe Chemical Holding Group Company CYANINE GREEN 312 is a phthalocyanine pigment with good dispersability and strong color strength. This product has an oil absorption of 40-50 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, PA inks, NC inks, water or solvent bas...展开 CYANINE GREEN 312 is a phthalocyanine pigment with good dispersability and strong color strength. This product has an oil absorption of 40-50 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, PA inks, NC inks, water or solvent based decorative paint, textile printing, and offset inks. 收起
DPP RED D20 Zhejiang Baihe Chemical Holding Group Company DPP RED D20 is a high performance pigment with middle opacity and good fastness properties. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, coil coatings, powder coatings, water or sol...展开 DPP RED D20 is a high performance pigment with middle opacity and good fastness properties. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, coil coatings, powder coatings, water or solvent based decorative paint, and water based inks. 收起
DPP RED DB Zhejiang Baihe Chemical Holding Group Company DPP RED DB is a high performance pigment with high opacity and good fastness properties. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, coil coating, powder coatings, water or solvent...展开 DPP RED DB is a high performance pigment with high opacity and good fastness properties. This product has an oil absorption of 35-45 ml/100g and a pH value of 6.5-7.5. It is recommended for industrial paint, coil coating, powder coatings, water or solvent based decorative paint, OEM paint, and textile printing. 收起
Diethylene Glycol Ethyl Ether Acetate Jiangsu Ruijia Chemistry Co.,Ltd. Diethylene Glycol Ethyl Ether Acetate appears as a colorless and transparent liquid. It can be used as a coalescing aid for emulsion paints. It is also ideal for use to slow drying in nitrocellulose lacquers, natural paints, or spray paint.
Dipropylene Glycol Monomethyl Ether Jiangsu Ruijia Chemistry Co.,Ltd. Dipropylene Glycol Monomethyl Ether is a colorless and transparent liquid. It can be used as a solvent in water-based paints and screen-printing inks. It can also be used as the coupling agent (often mix) of dilute aqueous coatings.
Ethylene Glycol Ethyl Ether Acetate Jiangsu Ruijia Chemistry Co.,Ltd. Ethylene Glycol Ethyl Ether Acetate is a colorless and transparent liquid. It can be used as a solvent in protective coatings and inks, as well as a solvent for painting metal and furniture.
Ethylene Glycol Monobutyl Ether Jiangsu Ruijia Chemistry Co.,Ltd. Ethylene Glycol Monobutyl Ether is a colorless and transparent liquid. It can be used as a solvent in paint and as a solvent in enamel paint remover.
Ethylene Glycol Monobutyl Ether Acetate Jiangsu Ruijia Chemistry Co.,Ltd. Ethylene Glycol Monobutyl Ether Acetate is a colorless and transparent liquid. It can be used as a coalescing aid in emulsion paints. It can also be used in emulsion coatings.
Ethylene Glycol Monoethyl Ether Jiangsu Ruijia Chemistry Co.,Ltd. Ethylene Glycol Monoethyl Ether is a colorless and transparent liquid. It can be used as a solvent in paints and printing inks. It is also used in the preparation of paint thinner and as a raw material for paint.
ExBar™ 200 Excalibar Minerals LLC ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9.
ExBar™ 325 Excalibar Minerals LLC ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10.
ExBar™ 400 Excalibar Minerals LLC ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12.
ExBar™ W 1 Excalibar Minerals LLC ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起
ExBar™ W 2 Excalibar Minerals LLC ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起
ExBar™ W 3 Excalibar Minerals LLC ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起
ExBar™ W 325 Excalibar Minerals LLC ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起
ExBar™ W 4 Excalibar Minerals LLC ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起
ExBar™ W 400 Excalibar Minerals LLC ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起
ExCal® 100 Excalibar Minerals LLC ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 200 Excalibar Minerals LLC ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 325 Excalibar Minerals LLC ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 400 Excalibar Minerals LLC ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® CW 100 Excalibar Minerals LLC ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
ExCal® CW 200 Excalibar Minerals LLC ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
ExCal® CW 325 Excalibar Minerals LLC ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
FAST BRONZE VIOLET 159 Zhejiang Baihe Chemical Holding Group Company FAST BRONZE VIOLET 159 is a triarylcarbonium pigment with good performance and resistance. This product has an oil absorption of 40-50 ml/100g and a pH value of 6.5-7.5. It is recommended for water based inks, textile printing, and offset inks.
FAST ORANGE B-96 Zhejiang Baihe Chemical Holding Group Company FAST ORANGE B-96 is a semi-opaque orange pigment with good fastness to heat and solvents. This product has an oil absorption of 30-40 ml/100g and a pH value of 6-7. It is recommended for textile printing, water based inks, powder coatings, and offset inks...展开 FAST ORANGE B-96 is a semi-opaque orange pigment with good fastness to heat and solvents. This product has an oil absorption of 30-40 ml/100g and a pH value of 6-7. It is recommended for textile printing, water based inks, powder coatings, and offset inks. 收起
FAST RED A3B Zhejiang Baihe Chemical Holding Group Company FAST RED A3B is a high performance pigment with good dispersion. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for industrial paint, coil coating, powder coating, water or solvent based decorative paint, text...展开 FAST RED A3B is a high performance pigment with good dispersion. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for industrial paint, coil coating, powder coating, water or solvent based decorative paint, textile printing, and OEM paint. 收起
FAST SCARLET 259 Zhejiang Baihe Chemical Holding Group Company FAST SCARLET 259 is a calcium salt 2B pigment with a bluish shade and moderate light fastness. This product has an oil absorption of 45-55 ml/100g and a pH value of 7.5-8.5. It is suitable for industrial paint, powder coatings, and PVC.
FAST SCARLET 259B Zhejiang Baihe Chemical Holding Group Company FAST SCARLET 259B is a calcium salt 2B pigment with a bluish shade and good dispersion. This product has an oil absorption of 45-55 ml/100g and a pH value of 7.5-8.5. It is recommended for offset inks, PA and PP inks as well as PVC.
FAST SCARLET 2BM Zhejiang Baihe Chemical Holding Group Company FAST SCARLET 2BM is a manganese salt 2B pigment with a bluish shade and resistance to light and solvents. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for industrial paint and water based inks.
FAST SCARLET 482 Zhejiang Baihe Chemical Holding Group Company FAST SCARLET 482 is a calcium salt 2B pigment with moderate light fastness and good dispersion. This product has an oil absorption of 45-55 ml/100g and a pH value of 7.5-8.5. It is recommended for offset inks, PA inks, PP inks, and PVC.
FAST SCARLET 4BM Zhejiang Baihe Chemical Holding Group Company FAST SCARLET 4BM is a manganese salt 2B pigment with a bluish shade and resistance to light and solvents. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for industrial paint, powder coatings, solvent based dec...展开 FAST SCARLET 4BM is a manganese salt 2B pigment with a bluish shade and resistance to light and solvents. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for industrial paint, powder coatings, solvent based decorative paint as well as PVC. 收起
FAST SCARLET BH-2BP Zhejiang Baihe Chemical Holding Group Company FAST SCARLET BH-2BP is a calcium salt 2B pigment with a bluish shade, good dispersability, and migration resistance. This product has an oil absorption of 45-55 ml/100g and a pH value of 7.5-8.5. It is recommended for PVC, PO, and powder coatings.
FAST SCARLET BH-2BSP Zhejiang Baihe Chemical Holding Group Company FAST SCARLET BH-2BSP is a strontium salt 2B pigment with good dispersability and migration resistance. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for PVC, PO, and powder coatings.
FAST SCARLET BHXL Zhejiang Baihe Chemical Holding Group Company FAST SCARLET BHXL is a calcium salt 2B pigment with high transparency and gloss. Due to its good resistance to solvents, it is especially recommended for solvent based printing ink applications. This product has an oil absorption of 45-55 ml/100g and a pH...展开 FAST SCARLET BHXL is a calcium salt 2B pigment with high transparency and gloss. Due to its good resistance to solvents, it is especially recommended for solvent based printing ink applications. This product has an oil absorption of 45-55 ml/100g and a pH value of 7.5-8.5. It is often used in PA inks, NC inks, UV inks, and PP inks. 收起
FAST SCARLET GN Zhejiang Baihe Chemical Holding Group Company FAST SCARLET GN is a bright yellow shaded red barium 2B pigment. This product has an oil absorption of 35-45 ml/100g and a pH value of 7-8. It is suitable for use in offset inks and PVC.
FAST SCARLET GS Zhejiang Baihe Chemical Holding Group Company FAST SCARLET GS is a strontium salt 2B pigment. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is suitable for use in industrial paint, powder coatings, water based inks, and PVC.
FAST SCARLET WI Zhejiang Baihe Chemical Holding Group Company FAST SCARLET WI is a bright yellow shaded red barium 2B pigment. It exhibits good dispersion in both water and solvent based liquid inks. This product has an oil absorption of 35-45 ml/100g and a pH value of 7-8. It is recommended for water based inks, PA...展开 FAST SCARLET WI is a bright yellow shaded red barium 2B pigment. It exhibits good dispersion in both water and solvent based liquid inks. This product has an oil absorption of 35-45 ml/100g and a pH value of 7-8. It is recommended for water based inks, PA, and PP inks. 收起
FAST SCARLET WI-03 Zhejiang Baihe Chemical Holding Group Company FAST SCARLET WI-03 is a strontium salt 2B pigment with good dispersion in both water and solvent based liquid inks. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for water based inks, powder coating, and PA ...展开 FAST SCARLET WI-03 is a strontium salt 2B pigment with good dispersion in both water and solvent based liquid inks. This product has an oil absorption of 45-55 ml/100g and a pH value of 7-8. It is recommended for water based inks, powder coating, and PA inks. 收起
HANSA YELLOW 103 Zhejiang Baihe Chemical Holding Group Company HANSA YELLOW 103 is an aryl amide azo pigment with a green tint and good resistance properties. This product has an oil absorption of 25-35 ml/100g and a pH value of 6.5-7.5. It is recommended for water based decorative paints. industrial paints, and powd...展开 HANSA YELLOW 103 is an aryl amide azo pigment with a green tint and good resistance properties. This product has an oil absorption of 25-35 ml/100g and a pH value of 6.5-7.5. It is recommended for water based decorative paints. industrial paints, and powder coatings. 收起
HANSA YELLOW 133 Zhejiang Baihe Chemical Holding Group Company HANSA YELLOW 133 is an aryl amide yellow pigment with good weather resistance in strong shades. This product has an oil absorption of 25-35 ml/100g and a pH value of 6-7. It is recommended for water based decorative paints, industrial paints, and powder c...展开 HANSA YELLOW 133 is an aryl amide yellow pigment with good weather resistance in strong shades. This product has an oil absorption of 25-35 ml/100g and a pH value of 6-7. It is recommended for water based decorative paints, industrial paints, and powder coatings. 收起
Isobutyl Acetate Jiangsu Ruijia Chemistry Co.,Ltd. Isobutyl Acetate is a clear liquid without precipitates. It can be used in coatings and as a solvent in polymer paints, adhesives, and isocyanate lacquers.
Isooctyl Acetate Jiangsu Ruijia Chemistry Co.,Ltd. Isooctyl Acetate is a clear liquid with a pleasant, fruity fragrance. It is used to promote flow and retard blushing in formulations such as lacquers, lacquers emulsions in screen inks, parking enamels and air-dry enamels.
Isopropyl Acetate Jiangsu Ruijia Chemistry Co.,Ltd. Isopropyl Acetate is a colorless liquid with a strong, fruity odor. This product is a fast-evaporating solvent. It is used in gravure printing inks for plastic films such as bread wrap. The rest finds many uses in coatings and adhesives.
K-CURE® 1040 King Industries, Inc. K-CURE® 1040 is a solution of para-Toluenesulfonic acid (p-TSA) in isoproanol, featuring high gloss, excellent weathering characteristics, outstanding exterior durability, and fast curing properties. Common applications include can, paper, and wood coatin...展开 K-CURE® 1040 is a solution of para-Toluenesulfonic acid (p-TSA) in isoproanol, featuring high gloss, excellent weathering characteristics, outstanding exterior durability, and fast curing properties. Common applications include can, paper, and wood coatings, appliance finishes, and printing inks. 收起
K-CURE® 1040W King Industries, Inc. K-CURE® 1040W is a good quality para-Toluenesulfonic acid (p-TSA) stimulant that is dissolved in water. Some advantages of this product include fast curing ability, good weather ability, it is non-flammable, high gloss, and it is integraded into water sys...展开 K-CURE® 1040W is a good quality para-Toluenesulfonic acid (p-TSA) stimulant that is dissolved in water. Some advantages of this product include fast curing ability, good weather ability, it is non-flammable, high gloss, and it is integraded into water systems. It is soluble in water, alcohol, and also glycols. This product can be applied to water based wood coatings, paper coatings, and printing inks. 收起
K-CURE® 129B King Industries, Inc. K-CURE® 129B is a strong acid stimulant supplied at 50% in a blend of alcohols. It is a strong acid stimulant that is made to give fast cures with good pot life in two component acid curing lacquers. K-CURE® 129B is not recommended to be used on metal sub...展开 K-CURE® 129B is a strong acid stimulant supplied at 50% in a blend of alcohols. It is a strong acid stimulant that is made to give fast cures with good pot life in two component acid curing lacquers. K-CURE® 129B is not recommended to be used on metal substrates because of its corrosive nature. This product offer fast curing, and high acid value which allows lower does levels. This is a product that is soluble in water, alcohol, and glycols. It can be applied to wood, paper, and plastic coatings. 收起
K-FLEX® 148 King Industries, Inc. K-FLEX® 148 is a highly reactive, aliphatic polyester polyol which is suggested for melamine or isocyanate crosslinked sealants, adhesives, inks, elastomers, and coatings for better flexibility, higher gloss, and improved flow out. It has a lower viscosit...展开 K-FLEX® 148 is a highly reactive, aliphatic polyester polyol which is suggested for melamine or isocyanate crosslinked sealants, adhesives, inks, elastomers, and coatings for better flexibility, higher gloss, and improved flow out. It has a lower viscosity to form higher solid content with good hardness and expanded flexibility. It appears as a clear, light straw liquid, offers good flow and leveling along with being 100% active. K-FLEX® 148 is soluble in ketones, alcohols, esters, Aromatic 100, Aromatic 150, and xylene. It is partially soluble in mineral spirits and is insoluble in water. It is normally applied in office furniture coatings, automotive primers, coil coatings, overprint varnishes, and general industrials. 收起
K-FLEX® 171-90 King Industries, Inc. K-FLEX® 171-90 is a highly reactive, aliphatic polyester polyol that is suggested for aminoplast or isocyanate crosslinked coatings, sealants, inks, elastomers, and adhesives. Although it is slower reacting in isocyanate crosslinked systems, it offers lon...展开 K-FLEX® 171-90 is a highly reactive, aliphatic polyester polyol that is suggested for aminoplast or isocyanate crosslinked coatings, sealants, inks, elastomers, and adhesives. Although it is slower reacting in isocyanate crosslinked systems, it offers long pot life, enhanced adhesion and flexibility. Because of its lower hydroxyl number, K-FLEX® 171-90 requires less crosslinker. K-FLEX® 171-90 can also be used as a modifier of aminoplast crosslinked coatings, inks and adhesives to enhance flexibility and adhesion. It appears as a clear, light straw liquid and offers high resistivity and low temperature cure. This product is soluble in esters, ketones, alcohols, aromatic 100 and aromatic 150, and xylene. It is partially soluble in mineral spirits and is insoluble in water. It can be used in office furniture coatings, 2K urethane coatings, appliance coatings, elastomeric coatings, coil coatings, and epoxy flexibilizer. 收起
K-FLEX® 188 King Industries, Inc. K-FLEX® 188 is a highly reactive, aliphatic polyester polyol which is suggested for aminoplast or isocyanate crosslinked coatings, adhesives, sealants, elastomers, and inks. Its uniform, narrow molecular weight distribution and unique chemical structure p...展开 K-FLEX® 188 is a highly reactive, aliphatic polyester polyol which is suggested for aminoplast or isocyanate crosslinked coatings, adhesives, sealants, elastomers, and inks. Its uniform, narrow molecular weight distribution and unique chemical structure produce exceptional and consistent performance and broad compatibility. K-FLEX® 188's primary hydroxyl groups also produce reactivity with epoxies in cationic thermal cure systems. This product is 100% active and offers, good flexibility, adhesion to plastics, and high resistivity. It appears as a clear, light straw liquid and is soluble in the aerospace, automotive refinish, and marine maintenance industries along with plastic substrates, overprint varnishes, glass laminates, and optical coatings. 收起
K-FLEX® 7301 King Industries, Inc. K-FLEX® 7301 is a reactive diluent with low viscosity and good compatibility with a variety of resins. It can be crosslinked with amino resins, polyisocyanates, polyamides, polyamines, unsaturated polymers, and is based on acetoacetate functionality. It i...展开 K-FLEX® 7301 is a reactive diluent with low viscosity and good compatibility with a variety of resins. It can be crosslinked with amino resins, polyisocyanates, polyamides, polyamines, unsaturated polymers, and is based on acetoacetate functionality. It is effective for both high solids and water-based applications for enhancing adhesion and corrosion resistance. This product appears as a clear amber liquid, terminates solvent popping/pinholes, and reduces induction time in epoxy/polyamide coatings. It is soluble in alcohols, ketones, esters, and aliphatic and aromatic hydrocarbons. It can be used in 2 component epoxy/ polyamide coatings, isocyanate crosslined coatings, and UV cure and oxidizing polymerization. 收起
K-FLEX® A307 King Industries, Inc. K-FLEX® A307 is a low viscosity, 100% solids linear, saturated, aliphatic polyester diol with primary hydroxyl groups. This product was created as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. The low hydroxyl number minimize...展开 K-FLEX® A307 is a low viscosity, 100% solids linear, saturated, aliphatic polyester diol with primary hydroxyl groups. This product was created as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. The low hydroxyl number minimizes the crosslinker demand. It offers improved flexibility, light color, abrasion resistance, good balance of surface dry and pot life in 2K PU, and no acid functionality. It appears as a clear viscous liquid and is soluble in esters, alcohols, xylene, ketones, aromatic 100, and aromatic 150. It is partially soluble in mineral spirits and is insoluble in water. It can be applied in automotive refinish, automotive OEM, industrial maintenance, aerospace, and plastic coatings. 收起
K-FLEX® A308 King Industries, Inc. K-FLEX® A308 is a 100% active linear, saturated, low viscosity, aliphatic polyester diol with essential hydroxyl groups. This product was created as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. The low viscosity mixed togeth...展开 K-FLEX® A308 is a 100% active linear, saturated, low viscosity, aliphatic polyester diol with essential hydroxyl groups. This product was created as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. The low viscosity mixed together with higher hydroxyl number gives good adhesion and hardness with lower VOC levels. K-FLEX® A308 appears as a offers enhanced flexibility, light color, a balance of surface dry/pot life in 2K PU, no acid functionality, and abrasion resistance. It is soluble in esters, alcohols, Aromatic 100, Aromatic 150, ketones, and xylene. It is partially soluble in mineral spirits and is insoluble in water. It can be applied in automotive refinish, automotive OEM, plastic coatings, industrial maintenance, and aerospace. 收起
K-FLEX® UD-320 King Industries, Inc. K-FLEX® UD-320 is an aliphatic, high solids, low molecular weight urethane diol oligomer. It is soluble in polar organic solvents except aliphatic and aromatic hydrocarbons. To gain aromatic solubility it has to be combined with a hydrogen bonding solvent...展开 K-FLEX® UD-320 is an aliphatic, high solids, low molecular weight urethane diol oligomer. It is soluble in polar organic solvents except aliphatic and aromatic hydrocarbons. To gain aromatic solubility it has to be combined with a hydrogen bonding solvent. This product has broad compatibility with acrylic, polyester, and alkyd resins. K-FLEX® UD-320 enhances the hardness of melamine crosslinked systems. When used to modify a 2-component polyurethane, it will enhance hardness and flexibility. K-FLEX® UD-320 responds best to a zirconium chelate catalyst when used in isocyanate crosslinked systems. It also offers benefits like low VOC, chemical resistance, exterior durability, QUV resistance, and hydrolytic stability. This product can be used for machine/equipment coatings, automotive coatings, appliance coatings, wood and paper coatings, and aerospace coatings. 收起
K-FLEX® UD-320-100 King Industries, Inc. K-FLEX® UD-320-100 is a low molecular weight, aliphatic urethane diol oligomer, supplied at 100% solids. It is suggested to be used as a chemical intermediate for prepolymer synthesis and allows the incorporation of aliphatic urethane groups without the u...展开 K-FLEX® UD-320-100 is a low molecular weight, aliphatic urethane diol oligomer, supplied at 100% solids. It is suggested to be used as a chemical intermediate for prepolymer synthesis and allows the incorporation of aliphatic urethane groups without the use of isocyanates. It appears as a viscous clear liquid and offers a low VOC, enhanced hardness, exterior durability, hydrolytic stability, QUV resistance, and is solvent and isocyanate free. This product is soluble in almost all organic solvents excluding aliphatic and aromatic hydrocarbons. The only was to get aromatic solubility is to combine it with a hydrogen bonding solvent. K-FLEX® UD-320-100 can be applied in industries like paper, automotive, wood, leather, and screen printing ink. 收起
K-FLEX® UD-350W King Industries, Inc. K-FLEX® UD-350W is a water-based solution of an aliphatic, low molecular weight urethane diol oligomer. It is suggested to be used as a modifier for amino crosslinked water soluble, emulsified acrylic, alkyd, urethane, and polyester resins. K-FLEX® UD-350...展开 K-FLEX® UD-350W is a water-based solution of an aliphatic, low molecular weight urethane diol oligomer. It is suggested to be used as a modifier for amino crosslinked water soluble, emulsified acrylic, alkyd, urethane, and polyester resins. K-FLEX® UD-350W can be used as a reactive cosolvent replacement to enhance crosslink density, solids, film/resistance properties, and flow/leveling. It appears as a straw colored liquid and offers low VOC, water solubility, hardness, chemical resistance, hydrolytic stability, QUV resistance, and exterior durability. This is a product that is not soluble in aromatic and aliphatic hydrocarbons. It can used in making, coil coatings, wood coatings, can coatings, dip coatings, appliance coatings, automotive coatings, and overprint varnishes. 收起
K-FLEX® XM-3307 King Industries, Inc. K-FLEX® XM-3307 is a carboxyl and hydroxyl functional polyester-urethane polyol. It is made to be a dispersing resin for pigments that are organic or inorganic.. It has to be neutralized with an amine to give good dispersing qualities. This product appear...展开 K-FLEX® XM-3307 is a carboxyl and hydroxyl functional polyester-urethane polyol. It is made to be a dispersing resin for pigments that are organic or inorganic.. It has to be neutralized with an amine to give good dispersing qualities. This product appears as a viscous liquid and offers fast dispersion time, high pigment loading, and high pigment transparency. It is soluble in ketones, alcohols, esters, aromatic hydrocarbons, and is not soluble in aliphatic hydrocarbons. It can be soluble in water if it is neutralized with an organic amine. K-FLEX® XM-3307 can also be applied in water-based coatings, solvent-based coatings, and can be used as an intercoat adhesion promoter. 收起
K-FLEX® XM-332 King Industries, Inc. K-FLEX® XM-332 is a low viscosity polyester polyol modifier resin that provides enhanced flexibility in solvent-borne, high solids, and solventless systems. It is recommended for use in air dry/force dry 2-component polyurethanes and blocked isocyanate sy...展开 K-FLEX® XM-332 is a low viscosity polyester polyol modifier resin that provides enhanced flexibility in solvent-borne, high solids, and solventless systems. It is recommended for use in air dry/force dry 2-component polyurethanes and blocked isocyanate systems. It appears as a light colored liquid, is 100% active, and offers good flexibility and hydrolytic stability. This product is soluble in aromatics and polar organic solvents like ketones, alcohols, glycols, esters, and glycol ethers. Two things that it is not soluble in are aliphatics and water. K-FLEX® XM-332 can be applied in structural adhesives, thermoplastic urethanes, plastic coatings, cast elastomer prepolymers, and automotive topcoats and OEM coatings. 收起
K-FLEX® XM-337 King Industries, Inc. K-FLEX® XM-337 is an aliphatic saturated polyester diol modifier resin created to implement increased toughness and chemical resistance for solvent borne and high solids systems. It is recommended for use in 1 and 2 component polyurethanes, and blocked is...展开 K-FLEX® XM-337 is an aliphatic saturated polyester diol modifier resin created to implement increased toughness and chemical resistance for solvent borne and high solids systems. It is recommended for use in 1 and 2 component polyurethanes, and blocked isocyanate systems. This product offers low color, UV durability, high hardness, high impact resistance, abrasion resistance and overall increased toughness. It appears as a clear liquid and is soluble in a lot of polar organic solvents such as glycols, alcohols, esters, ketones, aromatics, glycol ethers, and is not soluble in water and aliphatics. 收起
K-FLEX® XM-359 King Industries, Inc. K-FLEX® XM-359 is created to provide long pot life in 2K polyurethanes and to avoid yellowing resulting from interaction with benzotriazole (BZT) UV absorbers in clearcoat systems. K-FLEX® XM-359 is a saturated, aliphatic resin modifier. It provides a goo...展开 K-FLEX® XM-359 is created to provide long pot life in 2K polyurethanes and to avoid yellowing resulting from interaction with benzotriazole (BZT) UV absorbers in clearcoat systems. K-FLEX® XM-359 is a saturated, aliphatic resin modifier. It provides a good balance of flexibility with hardness, good exterior durability plus great solubility in many different solvents including exempt solvents. It appears as a clear, light straw liquid and provides optical clarity and low color along with good compatibility. This product is soluble in esters, ketones, alcohols, aromatic 100, aromatic 150, xylene, t-butyl acetate, and Oxsol 100. It is partially soluble in mineral spirits, and insoluble in water. It is applied in plastic coatings, optically clear coatings, elastomers and laminates. 收起
K-FLEX® XM-360 King Industries, Inc. K-FLEX® XM-360 is made to produce long pot life in 2K polyurethanes and to prevent yellowing resulting from interaction with benzotriazole (BZT) UV absorbers. K-FLEX® XM-360 is a saturated, aliphatic resin modifier. It gives a good balance of flexibility ...展开 K-FLEX® XM-360 is made to produce long pot life in 2K polyurethanes and to prevent yellowing resulting from interaction with benzotriazole (BZT) UV absorbers. K-FLEX® XM-360 is a saturated, aliphatic resin modifier. It gives a good balance of flexibility with hardness, excellent exterior durability plus excellent solubility in many different solvents. This product offers good compatibility and solubility, optical clarity and low color, and it is 100% active. It appears as a light straw liquid and is soluble in ketones, aromatics, alcohols, glycols, glycol ethers, esters, and is insoluble in water. It can be applied in the aerospace industry, automotive refinishes, plastic coatings, marine maintenance, and optically clear coatings, elastomers, and laminates. 收起
K-FLEX® XM-366 King Industries, Inc. K-FLEX® XM-366 is a low viscosity, 100% active, saturated, aliphatic polyester diol with primary hydroxyl groups. This product was made for use as a resin modifier of acrylic/isocyanate and acrylic/melamine systems to expand flexibility and decline VOC. I...展开 K-FLEX® XM-366 is a low viscosity, 100% active, saturated, aliphatic polyester diol with primary hydroxyl groups. This product was made for use as a resin modifier of acrylic/isocyanate and acrylic/melamine systems to expand flexibility and decline VOC. It appears as a clear liquid that is light in color and offers good compatibility and solubility. This product is soluble in glycols, glycol ethers, alcohols, esters, aromatics, ketones, and is insoluble in aliphatic hydrocarbons and water. It can be applied in plastic coatings, aerospace, automotive OEM & refinishes, and VOC compliant systems. 收起
K-FLEX® XM-B301 King Industries, Inc. K-FLEX® XM-B301 is a low viscosity, acetoacetate functional reactive diluent that is compatible with variety of resins. It is mainly suggested to be used in epoxy/polyamide primers, but can also be used in systems crosslinked with amino resins or polyisoc...展开 K-FLEX® XM-B301 is a low viscosity, acetoacetate functional reactive diluent that is compatible with variety of resins. It is mainly suggested to be used in epoxy/polyamide primers, but can also be used in systems crosslinked with amino resins or polyisocyanates. This product appears as a clear amber liquid and offers reduced induction time, adhesion, corrosion resistance, viscosity reduction, and elimates solvent popping and pinholes. It is soluble in esters, alcohols, aromatics, and ketones. It is insoluble in aliphatic hydrocarbons and water. K-FLEX® XM-B301 can be applied in epoxy-polyamide primers for industries like aerospace, automotive, marine, truck/bus/rail, and industrial maintenance. 收起
K-KAT® 348 King Industries, Inc. K-KAT® 348 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two standard urethane coatings. It can provide similar characteristics to basic tin catalysts without the environmental setbacks. This product appears as a cl...展开 K-KAT® 348 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two standard urethane coatings. It can provide similar characteristics to basic tin catalysts without the environmental setbacks. This product appears as a clear, straw liquid and offers great catalysis of secondary hydroxyls, gloss retention, exterior durability, and the ability to be used in ambient, force dry, and bake systems. It is soluble in glycol ethers, aliphatics, and aromatics. It is limited in solubility in alcohols and esters and is insoluble in water. K-KAT® 348 can be applied in 2K and blocked isocyanate coatings, urethane elastomers, foams and coatings, and cationic coatings. 收起
K-KAT® 4205 King Industries, Inc. K-KAT® 4205 is a zirconium chelate complex that is an effective stimulant for high solids 2-integral urethane coatings. It is effective for ambient and low temperature cure systems. This product appears as a clear, colorless liquid and offers fast tack fr...展开 K-KAT® 4205 is a zirconium chelate complex that is an effective stimulant for high solids 2-integral urethane coatings. It is effective for ambient and low temperature cure systems. This product appears as a clear, colorless liquid and offers fast tack free time along with good viscosity stability. It is effective at low metal concentrations and also effective with a mix of isocyanates and polycols. K-KAT® 4205 is soluble in ketones, aromatic hydrocarbons, and esters. It can be applied to automotive topcoats, maintenance coatings, structural plastics coatings, and aerospace coatings. 收起
K-KAT® 5218 King Industries, Inc. K-KAT® 5218 is an aluminum chelate complex stimulant for 2 basic urethane coatings. It is effective for both ambient cure and baked systems. K-KAT® 5218 is supplied in a reactive diluent for high solids applications. It offers pot life extension with the ...展开 K-KAT® 5218 is an aluminum chelate complex stimulant for 2 basic urethane coatings. It is effective for both ambient cure and baked systems. K-KAT® 5218 is supplied in a reactive diluent for high solids applications. It offers pot life extension with the addition of 2,4-pentanedione, fast tack free time, exterior durability, and is effective with a variety of isocyanates and polyols. It appears as a slightly hazy, amber liquid and can be applied in automotive topcoats, aerospace coatings, maintenance coatings, and coatings for structural plastics. This product is soluble in ketones, esters, glycol ethers, alcohols, and aromatic hydrocarbons. 收起
K-KAT® 6212 King Industries, Inc. K-KAT® 6212 appears as a clear, straw liquid and is an effective stimulant when isocyanate and hydroxyl groups react with each other. It is a zirconium chelate complex dissolved in a reactive diluent. It offers good cure response and exterior durability a...展开 K-KAT® 6212 appears as a clear, straw liquid and is an effective stimulant when isocyanate and hydroxyl groups react with each other. It is a zirconium chelate complex dissolved in a reactive diluent. It offers good cure response and exterior durability along with a short tack free time. This product doesn't add to the hydrolysis of polyester resins and high selectivity for NCO/OH reactions over NCO/water reaction. It is soluble in esters, alcohols, ketones, aliphatic and aromatic hydrocarbons, glycol ethers, and glycol ether acetates. It is only partially soluble in water. It can be applied to adhesives, polyurethane coatings, casting resins and polyurethane resin synthesis, RIM, and water-based two component coatings. 收起
K-KAT® 670 King Industries, Inc. K-KAT® 670 is a novel non-tin stimulant for products containing crosslinkable silane terminated polymers. It appears as a light amber liquid and is soluble in esters, ketones, aromatic hydrocarbons, alcohols, and is insoluble in water. This product can be...展开 K-KAT® 670 is a novel non-tin stimulant for products containing crosslinkable silane terminated polymers. It appears as a light amber liquid and is soluble in esters, ketones, aromatic hydrocarbons, alcohols, and is insoluble in water. This product can be applied in ambient cured 1 component organosilane and 2 component organosilane hybrid coatings, caulks, adhesives, elastomers, and sealants. 收起
K-KAT® XC-B221 King Industries, Inc. K-KAT® XC-B221 is an experimental bismuth carboxylate stimulant that is made for blocked isocyanate and two basic urethane coatings. It is a bismuth stimulant that can contribute similar qualities to standard tin stimulants without the environmental drawb...展开 K-KAT® XC-B221 is an experimental bismuth carboxylate stimulant that is made for blocked isocyanate and two basic urethane coatings. It is a bismuth stimulant that can contribute similar qualities to standard tin stimulants without the environmental drawbacks. This product offers good glass retention, exterior durability, and the ability to be used in ambient, force dry, and bake systems. K-KAT® XC-B221 is soluble in butanol, ethanol, methanol, isopropanol, glycol ethers, glycol ether acetates, aliphatic and aromatic hydrocarbons, and is insoluble in water. This product appears as a clear, straw liquid and can be applied in 2K, blocked isocyanate coatings, urethane elastomers, foams, coatings, and cationic electro-coatings. 收起
K-KAT® XK-614 King Industries, Inc. K-KAT® XK-614 is a non-tin stimulant that is suggested to be applied in 2-component solvent-borne, 2-component waterborne polyurethanes, and also for 1-component blocked isocyanate systems. It is easy to add to the polyol components and offers good curing...展开 K-KAT® XK-614 is a non-tin stimulant that is suggested to be applied in 2-component solvent-borne, 2-component waterborne polyurethanes, and also for 1-component blocked isocyanate systems. It is easy to add to the polyol components and offers good curing time qualities. It also has good hydrolytic stability and exterior durability. This product has non-yellowing ability and great gloss retention characteristics. It appears as a light, yellow liquid, is soluble in alcohols, and is insoluble in water. 收起
K-KAT® XK-617 King Industries, Inc. K-KAT® XK-617 is an effective stimulant when isocyanates and polyols used in the production of cast elastomers react with each other. It is a proprietary blended organometallic complex specifically formulated to be a substitute to mercury stimulant withou...展开 K-KAT® XK-617 is an effective stimulant when isocyanates and polyols used in the production of cast elastomers react with each other. It is a proprietary blended organometallic complex specifically formulated to be a substitute to mercury stimulant without the concern of toxicity. It appears as a pale, light amber liquid, offers good cure response, and is environmentally more acceptable. This product is soluble in glycol ethers, n-butanol, ketones, aliphatics. aromatics, and is partially soluble in water. It is normally applied in 2K urethanes for cast elastomers. 收起
K-KAT® XK-620 King Industries, Inc. K-KAT® XK-620 is a novel tin free stimulant produced for use in epoxy and blocked isocyanates based cationic electro-coatings. It is supplied at 90% active in 2-butoxyethanol for ease of incorporation. It appears as a pale, yellow liquid and offers good c...展开 K-KAT® XK-620 is a novel tin free stimulant produced for use in epoxy and blocked isocyanates based cationic electro-coatings. It is supplied at 90% active in 2-butoxyethanol for ease of incorporation. It appears as a pale, yellow liquid and offers good corrosion resistance, and low temperature cure response. This product is soluble in glycols, glycol ethers, alcohols, and is insoluble in water. 收起
K-KAT® XK-628 King Industries, Inc. K-KAT® XK-628 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two fundamental urethane coatings. It can provide similar characteristics to basic tin stimulants without the environmental drawbacks. K-KAT® XK-628 appear...展开 K-KAT® XK-628 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two fundamental urethane coatings. It can provide similar characteristics to basic tin stimulants without the environmental drawbacks. K-KAT® XK-628 appears as a clear, amber liquid and is a made to give enhanced hydrolytic stability. This product offers good exterior ability, gloss retention, and the ability to be used in ambient, force dry, and bake systems. It is soluble in glycol ethers, aliphatics, and aromatics. It is partially soluble in alcohols, esters, and is insoluble in water. This product can be applied in 2K and blocked isocyanate coatings, urethane elastomers, foams, and coatings. 收起
K-KAT® XK-635 King Industries, Inc. K-KAT® XK-635 is a new non-tin stimulant suggested for solvent based or solvent free 2-component polyurethanes and 1-component blocked isocyanate systems. This product appears as a light, yellow liquid and offers good pot life in 2K PU systems, good cure ...展开 K-KAT® XK-635 is a new non-tin stimulant suggested for solvent based or solvent free 2-component polyurethanes and 1-component blocked isocyanate systems. This product appears as a light, yellow liquid and offers good pot life in 2K PU systems, good cure time, non-yellowing, and gloss retention. It is soluble in esters, aromatic hydrocarbons, and ketones. It is insoluble in water. This product is 100% active, weighs 9.5 lbs per gallon, and has a specific gravity of 1.14 g/ml. 收起
K-KAT® XK-639 King Industries, Inc. K-KAT® XK-639 is a new non-tin stimulant suggested for solvent based or solvent free 2-component polyurethanes and 1-component blocked isocyanate systems. This product appears as a light, yellow liquid and offers good pot life in 2K PU systems, good cure ...展开 K-KAT® XK-639 is a new non-tin stimulant suggested for solvent based or solvent free 2-component polyurethanes and 1-component blocked isocyanate systems. This product appears as a light, yellow liquid and offers good pot life in 2K PU systems, good cure time, non-yellowing, and gloss retention. It is soluble in esters, aromatic hydrocarbons, and ketones. It is insoluble in water. This product is 50% active in isopropanol, weighs 7.6 lbs per gallon, and has a specific gravity of 0.91 g/ml. 收起
K-KAT® XK-640 King Industries, Inc. K-KAT® XK-640 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two component urethane coatings. It offers good exterior durability, good gloss retention, and similar properties to standard tin catalysts without the env...展开 K-KAT® XK-640 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two component urethane coatings. It offers good exterior durability, good gloss retention, and similar properties to standard tin catalysts without the environmental drawbacks. K-KAT® XK-640 is a designed to provide improved hydrolytic stability compared to other bismuth carboxylate catalysts. This product is soluble in glycol ethers, aliphatics, and aromatics, has partial solubility in alcohols and esters, and is insoluble in water. It appears as a clear, amber liquid, is 18% metal, and can be applied in ambient, force dry and bake systems, 2K and blocked isocyanate coatings, and in the production of urethane coatings. 收起
K-KAT® XK-651 King Industries, Inc. K-KAT® XK-651 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate, two component urethanes, and one and two component silane terminated coatings. K-KAT® XK-651 is made to give good hydrolytic stability. This product has good ...展开 K-KAT® XK-651 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate, two component urethanes, and one and two component silane terminated coatings. K-KAT® XK-651 is made to give good hydrolytic stability. This product has good gloss retention, exterior durability, can replace tin stimulants, and good solubility. It is soluble in glycol ethers, aliphatics, aromatics, has partial solubility in alcohols and esters, and is not soluble in water. It can be applied in 2K and blocked isocyanate coatings, and in the production of urethane elastomers, foams, and coatings. 收起
K-PURE® CDI-4301 King Industries, Inc. K-PURE® CDI-4301 is a corrosion inhibitor made to be used in electronics applications and appears as a clear amber liquid. This product offers good solubility in water, glycols, and also alcohols. It can be applied in CMP and electronic cleaning solutions...展开 K-PURE® CDI-4301 is a corrosion inhibitor made to be used in electronics applications and appears as a clear amber liquid. This product offers good solubility in water, glycols, and also alcohols. It can be applied in CMP and electronic cleaning solutions and has a density of 0.99 g/ml. 收起