| Aliphatic 6/15 | Braskem S.A. | Aliphatic 6/15 is an aliphatic solvent. | |
| Bensub 2908 | Guangzhou ZEHM Functional Materials R&D Co.,Ltd. | Bensub 2908 is a white powder and a degassing agent that has a density of 0.93. This product can reduce particulates on cured film, and is commonly used for interior and exterior powder coatings. | |
| Bensub 2999 | Guangzhou ZEHM Functional Materials R&D Co.,Ltd. | Bensub 2999 is a white powder and a high-performance degassing agent that has a softening point of 95-115°C. This product has good discoloration resistance and is commonly used for interior and exterior powder coatings. | |
| CAB-151-0.7 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-151-0.7 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in p...展开 CAB-151-0.7 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-381-0.1 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-0.1 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in ...展开 CAB-381-0.1 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-381-0.5 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-0.5 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printin...展开 CAB-381-0.5 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-381-2 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing ...展开 CAB-381-2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-381-20 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-20 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in pr...展开 CAB-381-20 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-551-0.01 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-551-0.01 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printi...展开 CAB-551-0.01 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-551-0.2 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-551-0.2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printin...展开 CAB-551-0.2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| Cyclohexane | Braskem S.A. | Cyclohexane is a cyclic aliphatic hydrocarbon solvent. | |
| Dicyclopentadiene | Braskem S.A. | Dicyclopentadiene is a colorless hydrocarbon liquid. | |
| Diethylene Glycol Ethyl Ether Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Diethylene Glycol Ethyl Ether Acetate appears as a colorless and transparent liquid. It can be used as a coalescing aid for emulsion paints. It is also ideal for use to slow drying in nitrocellulose lacquers, natural paints, or spray paint. | |
| Dipropylene Glycol Monomethyl Ether | Jiangsu Ruijia Chemistry Co.,Ltd. | Dipropylene Glycol Monomethyl Ether is a colorless and transparent liquid. It can be used as a solvent in water-based paints and screen-printing inks. It can also be used as the coupling agent (often mix) of dilute aqueous coatings. | |
| Ethylene Glycol Ethyl Ether Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Ethylene Glycol Ethyl Ether Acetate is a colorless and transparent liquid. It can be used as a solvent in protective coatings and inks, as well as a solvent for painting metal and furniture. | |
| Ethylene Glycol Monobutyl Ether | Jiangsu Ruijia Chemistry Co.,Ltd. | Ethylene Glycol Monobutyl Ether is a colorless and transparent liquid. It can be used as a solvent in paint and as a solvent in enamel paint remover. | |
| Ethylene Glycol Monobutyl Ether Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Ethylene Glycol Monobutyl Ether Acetate is a colorless and transparent liquid. It can be used as a coalescing aid in emulsion paints. It can also be used in emulsion coatings. | |
| Ethylene Glycol Monoethyl Ether | Jiangsu Ruijia Chemistry Co.,Ltd. | Ethylene Glycol Monoethyl Ether is a colorless and transparent liquid. It can be used as a solvent in paints and printing inks. It is also used in the preparation of paint thinner and as a raw material for paint. | |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| Ezolem 6/13 | Braskem S.A. | Ezolem 6/13 is a solvent for rubber. | |
| Ezolem 6/17 | Braskem S.A. | Ezolem 6/17 is an aliphatic hydrocarbon solvent. | |
| Ezolem 6/7 | Braskem S.A. | Ezolem 6/7 is an aliphatic solvent. | |
| Ezolem 7/9 | Braskem S.A. | Ezolem 7/9 is a light aliphatic solvent. | |
| HS-100 | Braskem S.A. | HS-100 is an aromatic hydrocarbon solvent. | |
| Isobutyl Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Isobutyl Acetate is a clear liquid without precipitates. It can be used in coatings and as a solvent in polymer paints, adhesives, and isocyanate lacquers. | |
| Isooctyl Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Isooctyl Acetate is a clear liquid with a pleasant, fruity fragrance. It is used to promote flow and retard blushing in formulations such as lacquers, lacquers emulsions in screen inks, parking enamels and air-dry enamels. | |
| Isopropyl Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Isopropyl Acetate is a colorless liquid with a strong, fruity odor. This product is a fast-evaporating solvent. It is used in gravure printing inks for plastic films such as bread wrap. The rest finds many uses in coatings and adhesives. | |
| MatteX-3 | Guangzhou ZEHM Functional Materials R&D Co.,Ltd. | MatteX-3 is a white or light yellow powder that is a reactive matting agent derived from carboxyl-function acrylic resin for use in polyester/epoxy hybrid powder coatings. This product has a softening point of 100-125°C, good matting performance, and good...展开 MatteX-3 is a white or light yellow powder that is a reactive matting agent derived from carboxyl-function acrylic resin for use in polyester/epoxy hybrid powder coatings. This product has a softening point of 100-125°C, good matting performance, and good color stability. 收起 | |
| MatteX-8 | Guangzhou ZEHM Functional Materials R&D Co.,Ltd. | MatteX-8 is a white or light yellow powder that is a novel matting agent for use in polyester/epoxy hybrid powder coatings. This product has a softening point of 100-125°C, good mechanical properties, and good color stability. | |
| Melafine® | OCI MELAMINE | Melafine®, in the form of a white crystalline powder, is a fine-grade melamine. This product can be used in high-performance intumescent coatings. During the intumescent process, Melafine® acts as a blowing agent, which releases gases that enhance consist...展开 Melafine®, in the form of a white crystalline powder, is a fine-grade melamine. This product can be used in high-performance intumescent coatings. During the intumescent process, Melafine® acts as a blowing agent, which releases gases that enhance consistent formation and expansion of a rigid carbon matrix that protects the substrate from further heat and damage. 收起 | |
| MelaminebyOCI™ GPH | OCI MELAMINE | MelaminebyOCI™ GPH, in the form of a white crystalline powder, is a melamine. This product has a particle size that is below 350 microns and has been produced by the gas-phase process. It can be used in coatings, adhesive resins, laminates, and flame reta...展开 MelaminebyOCI™ GPH, in the form of a white crystalline powder, is a melamine. This product has a particle size that is below 350 microns and has been produced by the gas-phase process. It can be used in coatings, adhesive resins, laminates, and flame retardants. 收起 | |
| MelaminebyOCI™ GPH-LD | OCI MELAMINE | MelaminebyOCI™ GPH-LD, in the form of a white crystalline powder, is a melamine. This product can be used in coating, adhesive resins, laminates, molding compounds, and flame retardants, among other uses. It has a particle size that is smaller than 60 mic...展开 MelaminebyOCI™ GPH-LD, in the form of a white crystalline powder, is a melamine. This product can be used in coating, adhesive resins, laminates, molding compounds, and flame retardants, among other uses. It has a particle size that is smaller than 60 microns and has been produced in a low-density gas-phase process. 收起 | |
| MelaminebyOCI™ SLP | OCI MELAMINE | MelaminebyOCI™ SLP, in the form of a fine grade white crystalline powder, is a melamine. This product has a particle size that is below 180 microns and has been produced by the shortened-liquid phase process. It can be used in coatings, adhesive resins, l...展开 MelaminebyOCI™ SLP, in the form of a fine grade white crystalline powder, is a melamine. This product has a particle size that is below 180 microns and has been produced by the shortened-liquid phase process. It can be used in coatings, adhesive resins, laminates, and flame retardants. 收起 | |
| Mild-Matte A9 | Guangzhou ZEHM Functional Materials R&D Co.,Ltd. | Mild-Matte A9 is a white or light yellow powder that is an effective matting agent for use in polyester/TGIC powder coatings. This product has a softening point of 100-125°C and good weather resistance. | |
| Mixed Xylene | Braskem S.A. | Mixed Xylene is an aromatic hydrocarbon solvent. | |
| N-Propyl Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | N-Propyl Acetate is a colorless and volatile solvent with a mild and fruity odor. It can be used in automotive and plastic coatings and as a solvent in flexographic and screen printing inks. | |
| Noneno | Braskem S.A. | Noneno is a clear hydrocarbon liquid. | |
| PIB 10 | Braskem S.A. | PIB 10 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 10 is a non-toxic polymer. | |
| PIB 122 | Braskem S.A. | PIB 122 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 122 is a non-toxic polymer. | |
| PIB 128 | Braskem S.A. | PIB 128 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 128 is a non-toxic polymer. | |
| PIB 16 | Braskem S.A. | PIB 16 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. | |
| PIB 24 | Braskem S.A. | PIB 24 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 24 is a non-toxic polymer. | |
| PIB 240 | Braskem S.A. | PIB 240 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 240 is a non-toxic polymer. | |
| PIB 30 | Braskem S.A. | PIB 30 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 30 is a non-toxic polymer. | |
| PIB 32 | Braskem S.A. | PIB 32 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 32 is a non-toxic polymer. | |
| PIB 4 | Braskem S.A. | PIB 4 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 4 is a non-toxic polymer. | |
| PIB 6 | Braskem S.A. | PIB 6 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 6 is a non-toxic polymer. | |
| PIB 8 | Braskem S.A. | PIB 8 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 8 is a non-toxic polymer. | |
| Pluract 10+ | Braskem S.A. | Pluract 10+ is an aromatic hydrocarbon solvent. | |
| Pluract 12+ | Braskem S.A. | Pluract 12+ is a hydrocarbon solvent. | |
| Pluract 9 | Braskem S.A. | Pluract 9 is an aromatic hydrocarbon solvent. | |
| PriMat A5 | Guangzhou ZEHM Functional Materials R&D Co.,Ltd. | PriMat A5 is a white or light yellow powder that is a novel matting agent for use in polyester/β-hydroxyalkylamide (HAA) based powder coatings. This product has a softening point of 95-120°C, and good mechanical and chemical resistance. | |
| Propylene Glycol Monomethyl Ether | Jiangsu Ruijia Chemistry Co.,Ltd. | Propylene Glycol Monomethyl Ether is a colorless and transparent liquid. It is ideal for use as a solvent in printing inks. | |
| Propylene Glycol Monomethyl Ether Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Propylene Glycol Monomethyl Ether Acetate is a colorless and transparent liquid. It can be used as an additive in paints for automobiles, refrigerators, and airplanes. | |
| Sensitis 13/15 | Braskem S.A. | Sensitis 13/15 is a hydrocarbon solvent. | |
| Sensitis 17/21 | Braskem S.A. | Sensitis 17/21 is a hydrocarbon solvent. | |
| Sensitis 22/25 | Braskem S.A. | Sensitis 22/25 is a hydrocarbon solvent. | |
| Tetrâmero | Braskem S.A. | Tetrâmero is used in the formulation of industrial detergents and additives for lubricating oils. | |
| Toluene | Braskem S.A. | Toluene is an aromatic hydrocarbon solvent. | |
| Triacetin, Industrial Grade | Jiangsu Ruijia Chemistry Co.,Ltd. | Triacetin, Industrial Grade, is a clear liquid without precipitates. It can be used in architectural wall coatings and as a solvent in printing ink. It is also used as a highly effective plasticizer for cellulose-based plastics. | |
| UNILENE® A100 | Braskem S.A. | UNILENE® A100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents ...展开 UNILENE® A100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® A80 | Braskem S.A. | UNILENE® A80 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents a...展开 UNILENE® A80 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® A90 | Braskem S.A. | UNILENE® A90 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents a...展开 UNILENE® A90 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® B100 | Braskem S.A. | UNILENE® B100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents ...展开 UNILENE® B100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® B110 | Braskem S.A. | UNILENE® B110 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents ...展开 UNILENE® B110 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® B120 | Braskem S.A. | UNILENE® B120 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents ...展开 UNILENE® B120 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® BS130 | Braskem S.A. | UNILENE® BS130 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents...展开 UNILENE® BS130 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| UNILENE® BS140 | Braskem S.A. | UNILENE® BS140 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents...展开 UNILENE® BS140 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
| Verdcol® Blue 60 HG | Verdcol Ltd | Verdcol® Blue 60 HG is a highly saturated red shade blue pigment with good fastness. This product has an oil absorption of 40-45 g/100g and a density of 1.4-1.5 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatings, powder...展开 Verdcol® Blue 60 HG is a highly saturated red shade blue pigment with good fastness. This product has an oil absorption of 40-45 g/100g and a density of 1.4-1.5 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatings, powder coatings, coil coatings, and wood coatings. 收起 | |
| Verdcol® BML Carmine 176 T | Verdcol Ltd | Verdcol® BML Carmine 176 T is a transparent and blue shade red pigment with good fastness. This product has an oil absorption of 77-82 g/100g and a density of 1.4-1.5 g/cm3. It is used in both water and solvent based inks. | |
| Verdcol® BML Carmine 185 2T | Verdcol Ltd | Verdcol® BML Carmine 185 2T is a transparent and blue shade red pigment with good fastness. This product has an oil absorption of 85-90 g/100g and a density of 1.4-1.5 g/cm3. It is primarily used in water based inks and with limited suitability in solvent...展开 Verdcol® BML Carmine 185 2T is a transparent and blue shade red pigment with good fastness. This product has an oil absorption of 85-90 g/100g and a density of 1.4-1.5 g/cm3. It is primarily used in water based inks and with limited suitability in solvent based inks. 收起 | |
| Verdcol® BML Orange 36 HG | Verdcol Ltd | Verdcol® BML Orange 36 HG is a red shade orange pigment with good opacity, gloss and fastness. This product has an oil absorption of 65-70 g/100g and a density of 1.6-1.7 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatin...展开 Verdcol® BML Orange 36 HG is a red shade orange pigment with good opacity, gloss and fastness. This product has an oil absorption of 65-70 g/100g and a density of 1.6-1.7 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatings, powder coatings, coil coatings, and wood coatings. 收起 | |
| Verdcol® BML Yellow 151 GH | Verdcol Ltd | Verdcol® BML Yellow 151 GH is a green shade yellow pigment with good color strength and opacity. This product has an oil absorption of 45-50 g/100g and a density of 1.5-1.6 g/cm3, and is recommended as a replacement for diarylide yellow and lead chromate....展开 Verdcol® BML Yellow 151 GH is a green shade yellow pigment with good color strength and opacity. This product has an oil absorption of 45-50 g/100g and a density of 1.5-1.6 g/cm3, and is recommended as a replacement for diarylide yellow and lead chromate. It can also be used in automotive coatings, industrial coatings, decorative coatings, powder coatings, coil coatings, and wood coatings. 收起 | |
| Verdcol® BML Yellow 154 | Verdcol Ltd | Verdcol® BML Yellow 154 is a medium shade and good opacity yellow pigment and is recommended for water based systems. This product has an oil absorption of 55-60 g/100g and a density of 1.5-1.6 g/cm3. It can be used in automotive coatings, industrial coat...展开 Verdcol® BML Yellow 154 is a medium shade and good opacity yellow pigment and is recommended for water based systems. This product has an oil absorption of 55-60 g/100g and a density of 1.5-1.6 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatings, and wood coatings. 收起 | |
| Verdcol® BML Yellow 180 3T | Verdcol Ltd | Verdcol® BML Yellow 180 3T is a green shade and highly transparent yellow pigment with good fastness. This product has an oil absorption of 80-85 g/100g and a density of 1.4-1.5 g/cm3. It is primarily used in water based inks and with a limited suitabilit...展开 Verdcol® BML Yellow 180 3T is a green shade and highly transparent yellow pigment with good fastness. This product has an oil absorption of 80-85 g/100g and a density of 1.4-1.5 g/cm3. It is primarily used in water based inks and with a limited suitability in solvent based inks. 收起 | |
| Verdcol® BML Yellow 180 T | Verdcol Ltd | Verdcol® BML Yellow 180 T is a mid-green shade and semi-opaque yellow pigment with good fastness. This product has an oil absorption of 75-80 g/100g and a density of 1.4-1.5 g/cm3. It is primarily used in water based inks. | |
| Verdcol® DL Yellow 12 S | Verdcol Ltd | Verdcol® DL Yellow 12 S is a mid-red shade yellow pigment with high gloss and transparency. This product has an oil absorption of <55 g/100g and a density of 1.4-1.6 g/cm3. It is primarily used in solvent based inks. | |
| Verdcol® DL Yellow 13 GP | Verdcol Ltd | Verdcol® DL Yellow 13 GP is a mid shade yellow pigment. This product has an oil absorption of <55 g/100g and a density of 1.3-1.5 g/cm3. It can be used in solvent based inks. | |
| Verdcol® DL Yellow 13 S | Verdcol Ltd | Verdcol® DL Yellow 13 S is a mid shade yellow pigment with high gloss and transparency. This product has an oil absorption of <50 g/100g and a density of 1.3-1.5 g/cm3. It is primarily used in solvent based inks. | |
| Verdcol® DL Yellow 14 GP | Verdcol Ltd | Verdcol® DL Yellow 14 GP is a mid-green shade yellow pigment. This product has an oil absorption of <40 g/100g and a density of 1.5-1.7 g/cm3. It can be used in water based inks and solvent based inks. | |
| Verdcol® DL Yellow 14 S | Verdcol Ltd | Verdcol® DL Yellow 14 S is a mid-green shade yellow pigment with high gloss and transparency. This product has an oil absorption of <40 g/100g and a density of 1.5-1.7 g/cm3. It is primarily used in solvent based inks. | |
| Verdcol® DL Yellow 14 SWK | Verdcol Ltd | Verdcol® DL Yellow 14 SWK is a mid-green shade yellow pigment with good transparency and gloss. This product has an oil absorption of <40 g/100g and a density of 1.5-1.7 g/cm3. It is primarily used in solvent based inks. | |
| Verdcol® DL Yellow 17 S | Verdcol Ltd | Verdcol® DL Yellow 17 S is a green shade yellow pigment with good gloss and transparency. This product has an oil absorption of <55 g/100g and a density of 1.4-1.6 g/cm3. It is primarily used in solvent based inks. | |
| Verdcol® DL Yellow 83 S | Verdcol Ltd | Verdcol® DL Yellow 83 S is a strong red shade yellow pigment with good gloss and flow. This product has an oil absorption of <45 g/100g and a density of 1.4-1.6 g/cm3. It is primarily used in solvent based inks. | |
| Verdcol® DL Yellow 83 SO | Verdcol Ltd | Verdcol® DL Yellow 83 SO is a red shade yellow pigment with good saturation and hiding power. This product has an oil absorption of 60-65 g/100g and a density of 1.4-1.6 g/cm3. It is primarily used in industrial coatings, powder coatings, and coil coating...展开 Verdcol® DL Yellow 83 SO is a red shade yellow pigment with good saturation and hiding power. This product has an oil absorption of 60-65 g/100g and a density of 1.4-1.6 g/cm3. It is primarily used in industrial coatings, powder coatings, and coil coatings. It may also find use in decorative coatings and automotive coatings. 收起 |
