| BT-B100 CMIT | BioTio Group | BT-B100 CMIT is a colorless to amber liquid that has a specific gravity of 1.26-1.32 and a pH value of 1.0-4.0. This product is most commonly used as a preservative in paints, resin emulsions, oil-water emulsions, and coating applications. | |
| BT-B100 MIT | BioTio Group | BT-B100 MIT is a greenish liquid that has a specific gravity of 1.10-1.20 and a pH value of 2.0-5.0. This product is most commonly used as a preservative in paints, resin emulsions, oil-water emulsions, and coating applications. | |
| BT-B101 BRONOPOL | BioTio Group | BT-B101 BRONOPOL is a white crystalline powder that has a melting point of 126-131°C and a pH value of 5.0-7.0. This product is most commonly used as a broad-spectrum antimicrobial agent in coatings, paints, inks, and adhesive applications. | |
| BT-B102 DBNPA | BioTio Group | BT-B102 DBNPA is a white crystalline powder that has a moisture content of ≤0.5% and a pH value of 4.0-6.0. This product is most commonly used as a biocide and preservative in paint applications. | |
| BT-B103 MIT | BioTio Group | BT-B103 MIT is a colorless to amber liquid that has a specific gravity of ≥1.10 and a pH value of 5.0-7.0. This product is most commonly used as a biocide and preservative in coatings, paints, resin emulsions, and oil-water emulsion applications. | |
| BT-B104 IPBC | BioTio Group | BT-B104 IPBC is a white crystalline powder that has a melting point of 65-68°C and a moisture content of ≤0.10%. This product is most commonly used as a highly effective fungicide in coatings and paint applications. | |
| BT-B105 BIT | BioTio Group | BT-B105 BIT is a white to light yellow powder that has a melting point of 155-158°C and a moisture content of ≤15%. This product is most commonly used as a biocide and preservative in coatings, paints, resin emulsions, and oil water emulsion applications. | |
| BT-B106 OIT | BioTio Group | BT-B106 OIT is an amber liquid that has a specific gravity of ≤1.1% and a moisture content of <0.5%. This product is most commonly used as a biocide and preservative in coatings, paints, resin emulsions, and oil water emulsion applications. | |
| BT-B107 DCOIT | BioTio Group | BT-B107 DCOIT is a white crystalline powder that has a melting point of 42.2-42.8°C and a moisture content of ≤0.10%. This product is most commonly used to provide broad-spectrum protection against degradation, discoloration and defacement caused by mold,...展开 BT-B107 DCOIT is a white crystalline powder that has a melting point of 42.2-42.8°C and a moisture content of ≤0.10%. This product is most commonly used to provide broad-spectrum protection against degradation, discoloration and defacement caused by mold, mildew and algae. It can be used in antifouling paint and other coatings. 收起 | |
| BT-B110 PCMC | BioTio Group | BT-B110 PCMC is a white to off-white crystalline powder that has a melting point of 114-116°C and a moisture content of <2.0%. This product is most commonly used as an antiseptic or antifungal agent in paint applications. | |
| BT-B112 ZPT | BioTio Group | BT-B112 ZPT is a white to off-white powder that has a pH value of 6.5-8.5 and a content/assay of ≥96%. This product is most commonly used as an antibacterial agent in coatings, paints, and adhesives. | |
| BT-B115 BBIT | BioTio Group | BT-B115 BBIT is a light pink, clear liquid that has a pH value of 6.5-8.0 and a density of 1.17 g/cm3. This product is most commonly used as a biocide and preservative in coatings, paints, resin emulsions, and oil water emulsion applications. | |
| BT-B117 DBDCB | BioTio Group | BT-B117 DBDCB is a white crystalline powder that has a melting point of 50.0-54.5°C and a content/assay of ≥99%. This product is most commonly used as a preservative in coatings. | |
| BT-IN603 DTSA | BioTio Group | BT-IN603 DTSA is an off-white to light yellow powder that has a melting point of 280-290°C and a moisture content of ≤0.10%. This product is most commonly used as a chemical intermediate in dyes and biocides. | |
| BT-IN604 DCPI | BioTio Group | BT-IN604 DCPI is a white crystalline powder that has a content/assay of ≥98% and other isocyanate content of ≤1.0%. This product is most commonly used as an intermediate for the production of dyes. | |
| CAB-151-0.7 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-151-0.7 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in p...展开 CAB-151-0.7 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-381-0.1 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-0.1 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in ...展开 CAB-381-0.1 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-381-0.5 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-0.5 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printin...展开 CAB-381-0.5 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-381-2 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing ...展开 CAB-381-2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-381-20 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-20 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in pr...展开 CAB-381-20 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-551-0.01 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-551-0.01 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printi...展开 CAB-551-0.01 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-551-0.2 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-551-0.2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printin...展开 CAB-551-0.2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| Diethylene Glycol Ethyl Ether Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Diethylene Glycol Ethyl Ether Acetate appears as a colorless and transparent liquid. It can be used as a coalescing aid for emulsion paints. It is also ideal for use to slow drying in nitrocellulose lacquers, natural paints, or spray paint. | |
| Dipropylene Glycol Monomethyl Ether | Jiangsu Ruijia Chemistry Co.,Ltd. | Dipropylene Glycol Monomethyl Ether is a colorless and transparent liquid. It can be used as a solvent in water-based paints and screen-printing inks. It can also be used as the coupling agent (often mix) of dilute aqueous coatings. | |
| Ethylene Glycol Ethyl Ether Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Ethylene Glycol Ethyl Ether Acetate is a colorless and transparent liquid. It can be used as a solvent in protective coatings and inks, as well as a solvent for painting metal and furniture. | |
| Ethylene Glycol Monobutyl Ether | Jiangsu Ruijia Chemistry Co.,Ltd. | Ethylene Glycol Monobutyl Ether is a colorless and transparent liquid. It can be used as a solvent in paint and as a solvent in enamel paint remover. | |
| Ethylene Glycol Monobutyl Ether Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Ethylene Glycol Monobutyl Ether Acetate is a colorless and transparent liquid. It can be used as a coalescing aid in emulsion paints. It can also be used in emulsion coatings. | |
| Ethylene Glycol Monoethyl Ether | Jiangsu Ruijia Chemistry Co.,Ltd. | Ethylene Glycol Monoethyl Ether is a colorless and transparent liquid. It can be used as a solvent in paints and printing inks. It is also used in the preparation of paint thinner and as a raw material for paint. | |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| Isobutyl Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Isobutyl Acetate is a clear liquid without precipitates. It can be used in coatings and as a solvent in polymer paints, adhesives, and isocyanate lacquers. | |
| Isooctyl Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Isooctyl Acetate is a clear liquid with a pleasant, fruity fragrance. It is used to promote flow and retard blushing in formulations such as lacquers, lacquers emulsions in screen inks, parking enamels and air-dry enamels. | |
| Isopropyl Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Isopropyl Acetate is a colorless liquid with a strong, fruity odor. This product is a fast-evaporating solvent. It is used in gravure printing inks for plastic films such as bread wrap. The rest finds many uses in coatings and adhesives. | |
| Leafing Aluminum Paste BT-AP400 | BioTio Group | Leafing Aluminum Paste BT-AP400 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥65%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展开 Leafing Aluminum Paste BT-AP400 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥65%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP401 | BioTio Group | Leafing Aluminum Paste BT-AP401 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥75%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展开 Leafing Aluminum Paste BT-AP401 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥75%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP402 | BioTio Group | Leafing Aluminum Paste BT-AP402 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展开 Leafing Aluminum Paste BT-AP402 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP403 | BioTio Group | Leafing Aluminum Paste BT-AP403 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥82%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展开 Leafing Aluminum Paste BT-AP403 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥82%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP404 | BioTio Group | Leafing Aluminum Paste BT-AP404 is a high pure aluminum powder that has a pigment content of 73±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展开 Leafing Aluminum Paste BT-AP404 is a high pure aluminum powder that has a pigment content of 73±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| LITHOPONE BT-IN600 | BioTio Group | LITHOPONE BT-IN600 is a white powder with a zinc sulfide content of ≥28% and a pH value of 7.2. This product is most commonly used in printing inks, marking paints, and coating applications. | |
| N-Propyl Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | N-Propyl Acetate is a colorless and volatile solvent with a mild and fruity odor. It can be used in automotive and plastic coatings and as a solvent in flexographic and screen printing inks. | |
| Non-Leafing Aluminum Paste BT-AP110 | BioTio Group | Non-Leafing Aluminum Paste BT-AP110 is a high pure aluminum powder that has a pigment content of 60±2% and an average particle size of 15μm. This product is most commonly used in marine paints, decorative and aerosol finishes, and coil coatings. | |
| Non-Leafing Aluminum Paste BT-AP120 | BioTio Group | Non-Leafing Aluminum Paste BT-AP120 is a high pure aluminum powder that has a pigment content of 60±2% and an average particle size of 15μm. This product is most commonly used in marine paints, decorative and aerosol finishes, and coil coatings. | |
| Non-Leafing Aluminum Paste BT-AP130 | BioTio Group | Non-Leafing Aluminum Paste BT-AP130 is a high pure aluminum powder that has a pigment content of 62±2% and an average particle size of 16μm. This product is most commonly used in marine paints, decorative and aerosol finishes, and coil coatings. | |
| Non-Leafing Aluminum Paste BT-AP140 | BioTio Group | Non-Leafing Aluminum Paste BT-AP140 is a high pure aluminum powder that has a pigment content of 62±2% and an average particle size of 7μm. This product is most commonly used in marine paints, decorative and aerosol finishes, and coil coatings. | |
| Precipitated Barium Sulfate BT-IN601 | BioTio Group | Precipitated Barium Sulfate BT-IN601 is a white powder with a barium sulfate content of 98% and a maximum whiteness of 93. This product is most commonly used as a filler in printing ink, paint, surface coating, coated art paper, and dye applications. | |
| Propylene Glycol Monomethyl Ether | Jiangsu Ruijia Chemistry Co.,Ltd. | Propylene Glycol Monomethyl Ether is a colorless and transparent liquid. It is ideal for use as a solvent in printing inks. | |
| Propylene Glycol Monomethyl Ether Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Propylene Glycol Monomethyl Ether Acetate is a colorless and transparent liquid. It can be used as an additive in paints for automobiles, refrigerators, and airplanes. | |
| Sodium Alginate BT-IN607 | BioTio Group | Sodium Alginate BT-IN607 is a 40-mesh sized, light yellow powder that has a pH value of 6.0-7.0. This product is most commonly used as a thickener in reactive dyestuff, textile screen-printing, and carpet jet-printing applications. | |
| Titanium Dioxide Anatase BT-A10 | BioTio Group | Titanium Dioxide Anatase BT-A10 is a white powder that has a titanium dioxide content of ≤93% and a pH value of 6.5-8.0. This product is most commonly used in road marking and exterior paint applications. | |
| Titanium Dioxide Anatase BT-A101 | BioTio Group | Titanium Dioxide Anatase BT-A101 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.5-8.0. This product is most commonly used in road marking and exterior paint applications. | |
| Titanium Dioxide Anatase BT-A102 | BioTio Group | Titanium Dioxide Anatase BT-A102 is a white powder that has a titanium dioxide content of ≥98% and a pH value of 6.5-8.0. This product is most commonly used in road marking and exterior paint applications. | |
| Titanium Dioxide Anatase BT-A11 | BioTio Group | Titanium Dioxide Anatase BT-A11 is a white powder that has a titanium dioxide content of ≤93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Anatase BT-A113 | BioTio Group | Titanium Dioxide Anatase BT-A113 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Anatase BT-A114 | BioTio Group | Titanium Dioxide Anatase BT-A114 is a white powder that has a titanium dioxide content of ≥98% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Anatase BT-A12 | BioTio Group | Titanium Dioxide Anatase BT-A12 is a white powder that has a titanium dioxide content of ≤93% and a pH value of 6.5-8.0. This product is most commonly used in latex paint applications. | |
| Titanium Dioxide Anatase BT-A125 | BioTio Group | Titanium Dioxide Anatase BT-A125 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.5-8.0. This product is most commonly used in latex paint applications. | |
| Titanium Dioxide Anatase BT-A126 | BioTio Group | Titanium Dioxide Anatase BT-A126 is a white powder that has a titanium dioxide content of ≥98% and a pH value of 6.5-8.0. This product is most commonly used in latex paint applications. | |
| Titanium Dioxide Rutile BT-R20 | BioTio Group | Titanium Dioxide Rutile BT-R20 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in latex paint applications. | |
| Titanium Dioxide Rutile BT-R201 | BioTio Group | Titanium Dioxide Rutile BT-R201 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in latex paint applications. | |
| Titanium Dioxide Rutile BT-R202 | BioTio Group | Titanium Dioxide Rutile BT-R202 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.5-8.0. This product is most commonly used in latex paint applications. | |
| Titanium Dioxide Rutile BT-R21 | BioTio Group | Titanium Dioxide Rutile BT-R21 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in exterior paints and traffic marking applications. | |
| Titanium Dioxide Rutile BT-R213 | BioTio Group | Titanium Dioxide Rutile BT-R213 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior paints and traffic marking applications. | |
| Titanium Dioxide Rutile BT-R214 | BioTio Group | Titanium Dioxide Rutile BT-R214 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior paints and traffic marking applications. | |
| Titanium Dioxide Rutile BT-R22 | BioTio Group | Titanium Dioxide Rutile BT-R22 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink appl...展开 Titanium Dioxide Rutile BT-R22 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Titanium Dioxide Rutile BT-R225 | BioTio Group | Titanium Dioxide Rutile BT-R225 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink app...展开 Titanium Dioxide Rutile BT-R225 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Titanium Dioxide Rutile BT-R226 | BioTio Group | Titanium Dioxide Rutile BT-R226 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.0-8.5. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink app...展开 Titanium Dioxide Rutile BT-R226 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.0-8.5. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Triacetin, Industrial Grade | Jiangsu Ruijia Chemistry Co.,Ltd. | Triacetin, Industrial Grade, is a clear liquid without precipitates. It can be used in architectural wall coatings and as a solvent in printing ink. It is also used as a highly effective plasticizer for cellulose-based plastics. | |
| VISIOMER® 1,4-BDDMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® 1,4-BDDMA is a low viscosity dimethacrylate monomer. It is ideal for use as a crosslinking agent for the free radical polymerization, and as adhesion promoter and hardener for PVC plastisols, and a coagent for peroxide crosslinking of elastomers...展开 VISIOMER® 1,4-BDDMA is a low viscosity dimethacrylate monomer. It is ideal for use as a crosslinking agent for the free radical polymerization, and as adhesion promoter and hardener for PVC plastisols, and a coagent for peroxide crosslinking of elastomers. 收起 | |
| VISIOMER® 1,6-HDDMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® 1,6-HDDMA is a hydrophobic dimethacrylate. Ideal for use as crosslinker for sealants, adhesives, inks, photopolymer plates and dental compounds. | |
| VISIOMER® AMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® AMA is a clear, colorless liquid with a pungent odor. Allyl methacrylate offers exceptional performance with two double bonds of different reactivity, allowing graft copolymerization in emulsions. It is used as a crosslinker, comonomer for rigid...展开 VISIOMER® AMA is a clear, colorless liquid with a pungent odor. Allyl methacrylate offers exceptional performance with two double bonds of different reactivity, allowing graft copolymerization in emulsions. It is used as a crosslinker, comonomer for rigid plastics, graft crosslinker and base product for the manufacture of silanes. 收起 | |
| VISIOMER® BDGMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® BDGMA is a monofunctional "label-free"methacrylate monomer with ether functionality. It has a very low Tg and is therefore an excellent plasticizing monomer, e.g. in emulsions | |
| VISIOMER® c-HMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® c-HMA is a clear, colorless hydrophobic methacrylate monomer that can be used for polymer synthesis. It is ideal for use in the paint, adhesive, leather, paper and textile industries. | |
| VISIOMER® C18 PEG 1105 MA W | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® C18 PEG 1105 MA W is a polar methacrylate monomer in water and GMAA. It consist of a hydrophylic backbone with side chains that end in a hydrophobic group . Ideal for use as associative polymeric thickener in emulsion polymers. | |
| VISIOMER® DMAPMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® DMAPMA is an amino functional methacrylate monomer that is used to improve pigment wetting and substrate adhesion to polymers. Suggested applications include paints and coatings, paper and water and cosmetic applications. | |
| VISIOMER® EGDMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® EGDMA is a low viscosity dimethacrylate monomer. It is ideal for use as a crosslinking agent to improve hardness and mechanical properties in plastics and adhesives, and a coagent for peroxide crosslinking of elastomers. | |
| VISIOMER® EHMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® EHMA is hydrophobic methacrylate monomer with low Tg. Used as flexibilizer and internal plasticizer. It is also an excellent co-monomer in coatings and adhesive applications. | |
| VISIOMER® HEMA-P 100 | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® HEMA-P 100 is a monofunctional methacrylate with a phosphate group in the side chain. It enables superior adhesion to polar surfaces like metals, glass, ceramics, and concrete. In direct-to-metal coatings, VISIOMER® HEMA-P100 enhances corrosion ...展开 VISIOMER® HEMA-P 100 is a monofunctional methacrylate with a phosphate group in the side chain. It enables superior adhesion to polar surfaces like metals, glass, ceramics, and concrete. In direct-to-metal coatings, VISIOMER® HEMA-P100 enhances corrosion resistance and improves film strength. It can be used e.g. as a functional co-monomer in acrylic emulsion for coating resins, as a reactive co-diluent in composite resins, or as an adhesion promoter in adhesive formulations. 收起 | |
| VISIOMER® HEMA-P 70M | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® HEMA-P 70M is a monofunctional methacrylate with a phosphate group in the side chain. Supplied in 30% methyl methacrylate, it is easy to handle due to its low viscosity. VISIOMER® HEMA-P 70M enables superior adhesion to polar surfaces like metal...展开 VISIOMER® HEMA-P 70M is a monofunctional methacrylate with a phosphate group in the side chain. Supplied in 30% methyl methacrylate, it is easy to handle due to its low viscosity. VISIOMER® HEMA-P 70M enables superior adhesion to polar surfaces like metals, glass, ceramics, and concrete. In direct to metal coatings, it enhances corrosion resistance and improves film strength. VISIOMER® HEMA-P 70M can be used e.g. as a functional co-monomer in acrylic emulsions for coating resins or as an adhesion promoter in adhesive formulations. 收起 | |
| VISIOMER® IDMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® IDMA is a hydrophobic methacrylate monomer with very low Tg. It is for use as a co-monomer in adhesives, sealants and paint resins. | |
| VISIOMER® MAAmide | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® MAAmide is a colorless, solid, crystalline with very high Tg . It is a special monomer for thermosetting paints and self-crosslinking emulsions. | |
| VISIOMER® MADAME™ | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® MADAME™ is a monofunctional methacrylate with a tertiary amino group in the side chain. Ideal for improving adhesion of formulations. Also used for the preparation of cationic polymers, especially quaternary ammonium polymers and flocculants. | |
| VISIOMER® MEEU 25 M | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® MEEU 25 M is an ureido methacrylate 25% in MMA. Used to impart wet adhesion and wet scrub resistance to solvent based polymers. | |
| VISIOMER® MEEU 50 W | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® MEEU 50 W is an ureido methacrylate 50% in water. It is designed to improve wet adhesion properties of emulsion polymers and wet scrub resistance of the final products. | |
| VISIOMER® MPEG 500 MA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® MPEG 500 MA is a pure, water-free, and easy-to-handle Methoxy Polyethyleneglycol Methacrylate monomer in liquid form. It is water soluble and contains approximately 12 ethylene oxide (EO) units in the chain. | |
| VISIOMER® MPEG 750 MA W | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® MPEG 750 MA W is a highly polar monomer (50% in water) with excellent water solubility. Used as co-polymerizable emulsifier to stabilize latex polymer systems e.g. emulsion. | |
| VISIOMER® PEG 8000 DMA W | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® PEG 8000 DMA W (Polyethylene glycol 8000 dimethacrylate) is a long-chain hydrophilic, crosslinking monomer. It is used as a co-monomer in formulations for joint sealants to close construction gaps in concrete slabs, decks, and similar structures...展开 VISIOMER® PEG 8000 DMA W (Polyethylene glycol 8000 dimethacrylate) is a long-chain hydrophilic, crosslinking monomer. It is used as a co-monomer in formulations for joint sealants to close construction gaps in concrete slabs, decks, and similar structures. 收起 |
