| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展开 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展开 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| CAB-151-0.7 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-151-0.7 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in p...展开 CAB-151-0.7 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-381-0.1 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-0.1 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in ...展开 CAB-381-0.1 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-381-0.5 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-0.5 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printin...展开 CAB-381-0.5 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-381-2 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing ...展开 CAB-381-2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-381-20 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-20 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in pr...展开 CAB-381-20 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-551-0.01 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-551-0.01 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printi...展开 CAB-551-0.01 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-551-0.2 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-551-0.2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printin...展开 CAB-551-0.2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| Diethylene Glycol Ethyl Ether Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Diethylene Glycol Ethyl Ether Acetate appears as a colorless and transparent liquid. It can be used as a coalescing aid for emulsion paints. It is also ideal for use to slow drying in nitrocellulose lacquers, natural paints, or spray paint. | |
| Dipropylene Glycol Monomethyl Ether | Jiangsu Ruijia Chemistry Co.,Ltd. | Dipropylene Glycol Monomethyl Ether is a colorless and transparent liquid. It can be used as a solvent in water-based paints and screen-printing inks. It can also be used as the coupling agent (often mix) of dilute aqueous coatings. | |
| DOWSIL™ 100F Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborn...展开 Dow Corning® 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborne and radiation curable coatings and has a low tendency to cause craters or impact gloss or clarity of the coating. Due to the low addition levels required, it does not cause issues with recoatability. 收起 | |
| DOWSIL™ 102F Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 102F Additive is a highly effective foam control agent for solvent based coating systems, which offers optimal defoaming and antifoaming at very low addition levels. It shows good compatibility in solvent based coatings and has low tendency t...展开 Dow Corning® 102F Additive is a highly effective foam control agent for solvent based coating systems, which offers optimal defoaming and antifoaming at very low addition levels. It shows good compatibility in solvent based coatings and has low tendency to cause craters or impact gloss or clarity of the coatings. 收起 | |
| DOWSIL™ 107F Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 107F Additive is a low-cyclic silicone foam control agent with high effectiveness in waterborne acrylic clear wood coating varnishes, and acrylic, styrene acrylic and VAE emulsion paint for architectural wall coatings. It reduces defects and micro...展开 DOWSIL™ 107F Additive is a low-cyclic silicone foam control agent with high effectiveness in waterborne acrylic clear wood coating varnishes, and acrylic, styrene acrylic and VAE emulsion paint for architectural wall coatings. It reduces defects and microbubbles in the coating film, thereby enhancing the durability of the substrate protection provided by the coating. It also has an excellent environmental and health profile which makes it suitable for the formulation of EU Ecolabel compliant indoor and outdoor paints and varnishes following the criteria set out in decision 2014/312/EU. 收起 | |
| DOWSIL™ 108F Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 108F Additive is a versatile antifoam active on the reduction of foam generated during the manufacture and application of water based paints, coatings and inks. It works in major types of water based resins like acrylics, vinyl acetate/ethyle...展开 Dow Corning® 108F Additive is a versatile antifoam active on the reduction of foam generated during the manufacture and application of water based paints, coatings and inks. It works in major types of water based resins like acrylics, vinyl acetate/ethylene (VAE dispersions), polyurethane dispersions, and alkyd emulsions. This antifoam additive is particularly recommended for premium low PVC coatings, to provide a good density control of the coating formulation while maintaining a good appearance of the final surface. 收起 | |
| DOWSIL™ 11 Additive | Dow Performance Silicones Paints, Inks and Coatings | 硅树脂添加剂，用于溶剂型涂装时具备滑爽性和流平性。 | |
| DOWSIL™ 14 Additive | Dow Performance Silicones Paints, Inks and Coatings | 硅树脂添加剂，用于水性和溶剂型涂装时具备滑爽性和流平性，用于水性体系时具备耐划伤性。 | |
| DOWSIL™ 163 Additive | Dow Performance Silicones Paints, Inks and Coatings | 用于溶剂型和UV涂料以及溶剂型和水性油墨的泡沫控制添加剂。 | |
| DOWSIL™ 18 Additive | Dow Performance Silicones Paints, Inks and Coatings | 高分子量聚二甲基硅氧烷分散体。用于树脂和极性溶剂等极性体系的一种独特的分散载体。 | |
| DOWSIL™ 204SL Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 204SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent, multiple properties in radiation curable coatings. It can also be used for solventborne coating formulations. This 100% silicone polyether co...展开 Dow Corning® 204SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent, multiple properties in radiation curable coatings. It can also be used for solventborne coating formulations. This 100% silicone polyether copolymer allows for low VOC, low addition levels and formulation flexibility. 收起 | |
| DOWSIL™ 205SL Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solvin...展开 Dow Corning® 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solving benefits to the formulator and reducing the amount of additives required in the formulation. 收起 | |
| DOWSIL™ 210S Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 210S Additive is an ultra-high molecular weight silicone dispersion in water with improved compatibility and low tendency to cause craters. It can be used to customize slip and hand-feel for coating surface, while improving mar resistance and...展开 Dow Corning® 210S Additive is an ultra-high molecular weight silicone dispersion in water with improved compatibility and low tendency to cause craters. It can be used to customize slip and hand-feel for coating surface, while improving mar resistance and enhancing anti-blocking. 收起 | |
| DOWSIL™ 211S Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 211S Additive is a novel low-cyclic, ultra-high molecular weight silicone delivered in a waterborne system that enhances mar resistance, slip and block resistance performance thereby helping to enable more durable, longer-lasting wood coatings. It...展开 DOWSIL™ 211S Additive is a novel low-cyclic, ultra-high molecular weight silicone delivered in a waterborne system that enhances mar resistance, slip and block resistance performance thereby helping to enable more durable, longer-lasting wood coatings. It also offers high compatibility, solvent dilution, and performs at very low dosage which are essential features for coating formulators. 收起 | |
| DOWSIL™ 23 N Additive | Dow Performance Silicones Paints, Inks and Coatings | ||
| DOWSIL™ 27 Additive | Dow Performance Silicones Paints, Inks and Coatings | 无电抗性甘醇硅氧烷表面活性剂，兼具硅氧烷和有机物的特点。主要用于降低摩擦系数。 | |
| DOWSIL™ 29 Additive | Dow Performance Silicones Paints, Inks and Coatings | 甲醇官能硅树脂乙二醇表面活性剂，用来改善流平和润湿性，提高光泽度。 | |
| DOWSIL™ 3 Additive | Dow Performance Silicones Paints, Inks and Coatings | 硅烷醇官能性硅树脂，用于颜料处理并改善流平。 | |
| DOWSIL™ 33 Additive | Dow Performance Silicones Paints, Inks and Coatings | 水性硅树脂弹性体悬浮液-提供涂层的触觉特性，能够赋予水性塑料涂料以柔软的手感；为聚丙烯酸和聚氨酯木器漆提供平滑的表面效果。 | |
| DOWSIL™ 401LS Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 401LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in solventborne and waterborne formulations at low addition levels. This product is suitable for pigmented and clear coat f...展开 Dow Corning® 401LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in solventborne and waterborne formulations at low addition levels. This product is suitable for pigmented and clear coat formulations, wood coatings, plastic coatings, inks and overprint varnishes, and is compliant with legislation for food packaging inks. 收起 | |
| DOWSIL™ 402LS Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 402LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in waterborne and radiation curable formulations at low addition levels. This product is recommended for pigmented and clea...展开 Dow Corning® 402LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in waterborne and radiation curable formulations at low addition levels. This product is recommended for pigmented and clear coat formulations, wood coatings, industrial metal coatings, inks and overprint varnishes, and is compliant with legislation for food packaging inks. 收起 | |
| DOWSIL™ 402LS Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 402LS Additive is a silicone additive which reduces the coefficient of friction of wood coatings, and offers blocking resistance, while improving the flow and levelling properties for the formulation. It performs at very low levels and exhibit a f...展开 DOWSIL™ 402LS Additive is a silicone additive which reduces the coefficient of friction of wood coatings, and offers blocking resistance, while improving the flow and levelling properties for the formulation. It performs at very low levels and exhibit a favorable environmental and health profile: it contains no solvent, no benzene, toluene, xylene, and meets European food contact regulations. 收起 | |
| DOWSIL™ 500W Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 500W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and eff...展开 Dow Corning® 500W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. 收起 | |
| DOWSIL™ 501W Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 501W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and eff...展开 Dow Corning® 501W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. 收起 | |
| DOWSIL™ 502W Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 502W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and eff...展开 Dow Corning® 502W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. 收起 | |
| DOWSIL™ 51 Additive | Dow Performance Silicones Paints, Inks and Coatings | 水分散型超高分子量聚二甲基硅树脂分散体，具有滑爽性和耐划伤性。 | |
| DOWSIL™ 52 Additive | Dow Performance Silicones Paints, Inks and Coatings | 一种低粘度, 可流动性助剂，用于提高耐划伤性和滑爽性，用于含极性溶剂的水性和溶剂型涂料。使水性涂料具有耐水性；并赋予涂料流平性、润湿性和光泽度。 | |
| DOWSIL™ 54 Additive | Dow Performance Silicones Paints, Inks and Coatings | 一种100%活性份的硅树脂乙二醇共聚物，应用在油墨中可起到滑爽、耐划伤和改善流平的作用。 | |
| DOWSIL™ 55 Additive | Dow Performance Silicones Paints, Inks and Coatings | 硅树脂乙二醇共聚物，赋予水性涂料以滑爽性、耐划伤性和流平性。 | |
| DOWSIL™ 56 Additive | Dow Performance Silicones Paints, Inks and Coatings | 硅氧烷添加剂，消除溶剂型体系中的微泡沫，并作为流平助剂。 | |
| DOWSIL™ 57 Additive | Dow Performance Silicones Paints, Inks and Coatings | 用于油墨和涂料的添加剂，用来改善流平、提高摩擦系数、增强耐划伤性、光泽度和颜料分散性。 | |
| DOWSIL™ 61 Paint Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 61 Paint Additive is a silicone hammertone additive. It is intended Intended primarily for solvent based paints, but can be incorporated into some water-borne systems. Addition levels are critical and have to be carefully determined for each ...展开 Dow Corning® 61 Paint Additive is a silicone hammertone additive. It is intended Intended primarily for solvent based paints, but can be incorporated into some water-borne systems. Addition levels are critical and have to be carefully determined for each product; care must also be taken to avoid contamination of other non-hammertone 收起 | |
| DOWSIL™ 62 Additive | Dow Performance Silicones Paints, Inks and Coatings | 用于油墨和涂料涂装的水性硅树脂防泡剂。 | |
| DOWSIL™ 67 Additive | Dow Performance Silicones Paints, Inks and Coatings | 用于水性涂料的硅树脂润湿剂。特点是低黏度、低表面张力，具有良好的扩散性和润湿性，高闪点，溶于水。 | |
| DOWSIL™ 68 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 68 Additive is an alkyl phenol ethoxylate-free silicone foam control agent. It is used for reducing foam and maintaining foam control during the production, handling and application of water-based inks, coatings and paints. | |
| DOWSIL™ 7 Additive | Dow Performance Silicones Paints, Inks and Coatings | 用于溶剂型油墨和涂料的泡沫控制和流平/润湿助剂。 | |
| DOWSIL™ 700P Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 700P Additive is alkoxy siloxane with organic group and it provides high efficiency to disperse inorganic pigment, especially titanium dioxide. Only 10–15% dosage of ordinary dispersants is needed to get fine particles and high gloss/low haze...展开 Dow Corning® 700P Additive is alkoxy siloxane with organic group and it provides high efficiency to disperse inorganic pigment, especially titanium dioxide. Only 10–15% dosage of ordinary dispersants is needed to get fine particles and high gloss/low haze of paint. It also keeps good stabilization of pigment dispersion so that it can effectively prevent pigment flooding and floating when tinting. Unlike traditional anti-flooding additives which operate by controlled flocculation, this product does not increase viscosity and does not negatively impact gloss. 收起 | |
| DOWSIL™ 71 Additive | Dow Performance Silicones Paints, Inks and Coatings | 对水性涂料有效的泡沫控制；低浓度应用，不含憎水粒子，高剪切混合下稳定。特别用于水性油墨，有效的泡沫控制和良好的表面外观之间的平衡性较好。 | |
| DOWSIL™ 74 Additive | Dow Performance Silicones Paints, Inks and Coatings | 硅氧烷聚合物泡沫控制剂。 | |
| DOWSIL™ 84 Additive | Dow Performance Silicones Paints, Inks and Coatings | 一种用于水性油墨的硅树脂添加剂。 | |
| DOWSIL™ 85 Additive | Dow Performance Silicones Paints, Inks and Coatings | 一种用于水性油墨的硅树脂添加剂。 | |
| DOWSIL™ 8526 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 8526 Additive is an easy-to-use, high performance silicone polyether additive that gives improved leveling and slip in waterborne solvent based and UV curing formulations at low addition levels. It may be used as effective slip or leveling ag...展开 Dow Corning® 8526 Additive is an easy-to-use, high performance silicone polyether additive that gives improved leveling and slip in waterborne solvent based and UV curing formulations at low addition levels. It may be used as effective slip or leveling agent in waterborne coating, solvent-based coating and UV curable coating. 收起 | |
| DOWSIL™ 8590 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 8590 Additive is a 100% active silicone antifoam compound with silica. It shows good compatibility in waterborne coatings and ink systems and has a low tendency to cause surface defects. This product is recommended for a acrylic styrene emuls...展开 Dow Corning® 8590 Additive is a 100% active silicone antifoam compound with silica. It shows good compatibility in waterborne coatings and ink systems and has a low tendency to cause surface defects. This product is recommended for a acrylic styrene emulsion paint for architectural wall coatings, waterborne flexo gravure inks, waterborne acrylic overprint varnishes, and acrylic urethane emulsion paints for wood. 收起 | |
| DOWSIL™ 8590 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surfa...展开 DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surface gloss. DOWSIL™ 8590 Additive can be used as sole defoamer for both grind and let down stages. Usage level can be 50 to 70 percent less than conventional defoamers for comparable or better performance. 收起 | |
| DOWSIL™ 8603 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 8603 Additive is a 100% active silicone antifoam compound with silica. It offers effective foam control for waterborne coating systems, and performs at low dosages. This product is recommended for waterborne interior wall paints, acrylic styr...展开 Dow Corning® 8603 Additive is a 100% active silicone antifoam compound with silica. It offers effective foam control for waterborne coating systems, and performs at low dosages. This product is recommended for waterborne interior wall paints, acrylic styrene emulsion paints, waterborne flexo gravure inks, waterborne polyester acrylic coatings, and waterborne acrylic modified alkyd coatings. 收起 | |
| DOWSIL™ 8621 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low te...展开 Dow Corning® 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low temperatures, which makes it suitable for the winter season. 收起 | |
| DOWSIL™ 8628 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low te...展开 Dow Corning® 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low temperatures, which makes it suitable for the winter season. 收起 | |
| DOWSIL™ 87 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 87 Additive is a 40% active silane based emulsion. It can be used in waterborne acrylic formulations to improve water repellency. This product is solvent and APEO free, and is recommended for waterborne decorative coatings. | |
| DOWSIL™ 88 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 88 Additive is a 98% active silane/siloxane concentrate. It can be used in polar and non-polar solvent containing acrylic formulations to improve water repellency. This product can be used for the formulation of solvent-borne decorative coati...展开 Dow Corning® 88 Additive is a 98% active silane/siloxane concentrate. It can be used in polar and non-polar solvent containing acrylic formulations to improve water repellency. This product can be used for the formulation of solvent-borne decorative coatings and in waterborne formulations containing polar solvents. 收起 | |
| DOWSIL™ Z-6121 Silane | Dow Performance Silicones Paints, Inks and Coatings | 提高溶剂型涂料的附着力，提供颜料处理。 | |
| DOWSIL™ Z-6137 Silane | Dow Performance Silicones Paints, Inks and Coatings | 附着力促进剂可作为添加剂或底层涂料用于水性体系，用来提高有机主体树脂和无机基材之间的结合力。 | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展开 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| Industrial Grade Zinc Oxide | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Industrial Grade Zinc Oxide is a white, small grain zinc oxide used in production of products like Zinc stearate, zinc bromide, zinc borate, phosphatizing liquid, as well as used in preparation of electroplate liquid. | |
| Isooctyl Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Isooctyl Acetate is a clear liquid with a pleasant, fruity fragrance. It is used to promote flow and retard blushing in formulations such as lacquers, lacquers emulsions in screen inks, parking enamels and air-dry enamels. | |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展开 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起 | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展开 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起 | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展开 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展开 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起 | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展开 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Nano Silver Powder TFNP-30 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry. | |
| Nano Silver Powder TFNP-80 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material. | |
| ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. | |
| Polyvinyl Alcohol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Polyvinyl alcohol is an important chemical raw materials for the manufacture of polyvinyl acetal, resistance to gasoline pipelines and vinylon synthetic fibers, fabric treatment agents, emulsifiers, paper coatings, adhesives, glues and so on. | |
| Precipitated Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...展开 Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. 收起 | |
| PVB | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PV...展开 Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PVB has high transparency, good cold resistance, water resistance, film forming properties and impact resistance, widely used in middle film of glass, ceramic flower paper, metal protective paint, tipping paper, aluminum foil, insulation paint, fiber treatment agent, finished parts, printing inks, dyes and so on. 收起 | |
| SandGel B | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SandGel B, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel B, is supplied as a white powder with optimize purity, whiteness ...展开 SandGel B, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel B, is supplied as a white powder with optimize purity, whiteness and is stable in diluted acids and bases and is particularly effective in acidic, neutral and alkaline systems. 收起 | |
| SandGel BL | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SandGel BL, a selectively mined, specially processed and water-washed smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel BL, is supplied as a white powder with optimize purity, whiteness and i...展开 SandGel BL, a selectively mined, specially processed and water-washed smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel BL, is supplied as a white powder with optimize purity, whiteness and is stable in diluted acids and bases and is particularly effective in acidic, neutral and alkaline systems. 收起 | |
| SandGel BN | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SandGel BN, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel BN, disperses easily and hydrates rapidly, has superior suspensi...展开 SandGel BN, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel BN, disperses easily and hydrates rapidly, has superior suspension and thixotropy, can be added as powder or blend with other ingredient in aqueous system. 收起 | |
| SandGel C | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SandGel C, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel C, is cellulose modified product, and has excellent anti electrol...展开 SandGel C, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel C, is cellulose modified product, and has excellent anti electrolyte performance, water-retaining property and rheological property, can be used as thickener, thixotropy, suspending agent, adhesive, latex stabilizer, etc. 收起 | |
| SandGel HL | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SandGel HL, a selectively mined, specially processed and water-washed smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel HL, has higher viscosity in low solid content and superior thixotropy, ...展开 SandGel HL, a selectively mined, specially processed and water-washed smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel HL, has higher viscosity in low solid content and superior thixotropy, can be used as thickener, thixotropy, suspending agent, adhesive, latex stabilizer, etc. It has the value to improve the storage stability, workability, and to prevent subsidence and drainage phenomenon. 收起 | |
| SCA-Y25E | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of t...展开 SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. SCA-Y25E can be used in a number of applications. 收起 | |
| SCA-Y25M | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion o...展开 SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. It can be used in a number of applications. 收起 | |
| Silane ATPN-1100 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to ...展开 Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to substrates. The primary amine function reacts with a wide array of thermoset, thermoplastic, and elastomeric materials. 收起 | |
| Silane ATPN-1110 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion an...展开 Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. 收起 | |
| Silane ATPN-1120 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of...展开 Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as“coupling agent”leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. 收起 | |
| Silane ATPN-171 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-171 is used to modify polyethylene and other polymers by grafting its vinyl group to the polymer backbone using a radical initiator, such as peroxide. This provides a polymer with pendant trimethoxysilyl groups that may be used as moisture-act...展开 Silane ATPN-171 is used to modify polyethylene and other polymers by grafting its vinyl group to the polymer backbone using a radical initiator, such as peroxide. This provides a polymer with pendant trimethoxysilyl groups that may be used as moisture-activated crosslinking sites via hydrolysis of the alkoxy groups followed by condensation of the resulting silanols. 收起 | |
| Silane ATPN-187 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-187 is an epoxy-functional silane, it is a clear, light straw liquid. ATPN-187 may used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass ...展开 Silane ATPN-187 is an epoxy-functional silane, it is a clear, light straw liquid. ATPN-187 may used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass roving size-binders. It is particularly employed as an adhesion-promoting additive in waterborne systems, e.g. improving the adhesion of acrylic latex sealants. 收起 | |
| Silane Coupling Agent Si-69 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strengt...展开 Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strength, tearing strength and abrasive resistance and reduce compression set of vulcanizates. In addition, it can reduce the viscosity and improve the processability of rubber products. Si-69 is especially suitable to improve the reinforcing properties of fillers that contain hydroxyl groups in all unsaturated polymers having double bonds or their blends. 收起 | |
| SILICONE FLUID ATPN-100 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICON...展开 SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-100 is ideal for use in a wide range of applications. 收起 | |
| SILICONE FLUID ATPN-1000 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICO...展开 SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-1000 is ideal for use in a wide range of applications. 收起 | |
| Silver Coated Copper Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silver Coated Copper Powder has Good electrical conductivity, high electrical conductivity and it is not easy to be oxidized, it is a promising good conductive material. It is a good conductive material, it is widely used in the electronic, electromechani...展开 Silver Coated Copper Powder has Good electrical conductivity, high electrical conductivity and it is not easy to be oxidized, it is a promising good conductive material. It is a good conductive material, it is widely used in the electronic, electromechanical, communication, printing, aerospace, etc. 收起 | |
| Triacetin, Industrial Grade | Jiangsu Ruijia Chemistry Co.,Ltd. | Triacetin, Industrial Grade, is a clear liquid without precipitates. It can be used in architectural wall coatings and as a solvent in printing ink. It is also used as a highly effective plasticizer for cellulose-based plastics. | |
| UVB2000 Special Tertiary Amine Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side an...展开 UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side and in the cured film, and reduced blooming. It is ideal for use in a wide range of applications. 收起 | |
| UVB2200 Reactive Amine Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of...展开 UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of applications. 收起 | |
| UVE3216 Modified Epoxy Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide...展开 UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide range of applications. 收起 | |
| XIAMETER® AFE-0700 Antifoam Emulsion | Dow Performance Silicones Paints, Inks and Coatings | XIAMETER® AFE-0700 Antifoam Emulsion is designed to provide optimum antifoam performance combined with good dilution stability and compatibility in various systems. It can be used in a wide variety of applications. This product is characterized by very go...展开 XIAMETER® AFE-0700 Antifoam Emulsion is designed to provide optimum antifoam performance combined with good dilution stability and compatibility in various systems. It can be used in a wide variety of applications. This product is characterized by very good dilution stability in tap and demineralized water as well as excellent long term foam control persistence. 收起 | |
| XIAMETER® AFE-2210 Antifoam Emulsion | Dow Performance Silicones Paints, Inks and Coatings | XIAMETER® AFE-2210 Antifoam Emulsion is a water-dilutable, 10% active emulsion that is designed to control foam in a variety of aqueous systems. It shows effective anti foam performance and compatibility in clear, water-borne wood coatings. This product i...展开 XIAMETER® AFE-2210 Antifoam Emulsion is a water-dilutable, 10% active emulsion that is designed to control foam in a variety of aqueous systems. It shows effective anti foam performance and compatibility in clear, water-borne wood coatings. This product is suitable for use in high gloss, semi-gloss and flat latex (emulsion) paints. 收起 |
