| Aliphatic C5 Hydrocarbon Resin E1102 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1102 is an amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1102 has an initial colour (YI) value of 2...展开 Aliphatic C5 Hydrocarbon Resin E1102 is an amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1102 has an initial colour (YI) value of 28. It can also be used as a modifier in polymer & rubber compounding and film applications. 收起 | |
| Aliphatic C5 Hydrocarbon Resin E1202 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1202 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1202 has an initial colour (YI) value of 23...展开 Aliphatic C5 Hydrocarbon Resin E1202 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1202 has an initial colour (YI) value of 23. It can also be used as a modifier in polymer & rubber compounding and film applications. 收起 | |
| Aliphatic C5 Hydrocarbon Resin E1204 LS | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1204 LS is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1204 LS has an initial colour (YI) value...展开 Aliphatic C5 Hydrocarbon Resin E1204 LS is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1204 LS has an initial colour (YI) value of 31. It can also be used as a modifier in polymer & rubber compounding and film applications. 收起 | |
| Aliphatic C5 Hydrocarbon Resin E1304 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1304 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1304 has an initial colour (YI) value of 29...展开 Aliphatic C5 Hydrocarbon Resin E1304 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1304 has an initial colour (YI) value of 29. It can also be used as a modifier in polymer & rubber compounding and film applications. 收起 | |
| Aliphatic C5 Hydrocarbon Resin E1310 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1310 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1310 has an initial colour (YI) value of 25...展开 Aliphatic C5 Hydrocarbon Resin E1310 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1310 has an initial colour (YI) value of 25. It can also be used as a modifier in polymer & rubber compounding and film applications. 收起 | |
| Aliphatic C5 Hydrocarbon Resin E1401 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1401 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1401 has an initial colour (YI) value of 31...展开 Aliphatic C5 Hydrocarbon Resin E1401 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1401 has an initial colour (YI) value of 31. It can also be used as a modifier in polymer & rubber compounding and film applications. 收起 | |
| Aliphatic C5 Hydrocarbon Resin E2203 LC | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E2203 LC is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer co...展开 Aliphatic C5 Hydrocarbon Resin E2203 LC is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aliphatic C5 Hydrocarbon Resin E2203 LC has an initial colour (YI) value of 23. 收起 | |
| Aliphatic C5 Hydrocarbon Resin ECR 213 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin ECR 213 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer com...展开 Aliphatic C5 Hydrocarbon Resin ECR 213 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aliphatic C5 Hydrocarbon Resin ECR 213 has an initial colour (YI) value of 87. 收起 | |
| Aliphatic C5 Hydrocarbon Resin ECR 288S | Aquent Impex | Aliphatic C5 Hydrocarbon Resin ECR 288S is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin ECR 288S has an initial colour (YI) value...展开 Aliphatic C5 Hydrocarbon Resin ECR 288S is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin ECR 288S has an initial colour (YI) value of 31. It can also be used as a modifier in polymer & rubber compounding and film applications. 收起 | |
| Aliphatic C5 Hydrocarbon Resin ECR 807 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin ECR 807 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer com...展开 Aliphatic C5 Hydrocarbon Resin ECR 807 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aliphatic C5 Hydrocarbon Resin ECR 807 has an initial colour (YI) value of 32. 收起 | |
| Aqualac AYD-127 | Aquent Impex | Aqualac AYD-127 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potti...展开 Aqualac AYD-127 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potting fields or used as the raw material for high –grade epoxy resin processing. It has an epoxy equivalences of 180-190 (g/eq). 收起 | |
| Aqualac AYD-128 | Aquent Impex | Aqualac AYD-128 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potti...展开 Aqualac AYD-128 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potting fields or used as the raw material for high –grade epoxy resin processing. It has an epoxy equivalences of 184-194 (g/eq). 收起 | |
| Aqualac AYD-801 | Aquent Impex | Aqualac AYD-801 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material ...展开 Aqualac AYD-801 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material has stronger impact resistance and flexibility. It is mainly used in coating and painting business. Aqualac AYD-801 has and epoxy equivalent of 450~500 (g/eq) and softening point of 65~75 (℃). 收起 | |
| Aqualac AYD-802 | Aquent Impex | Aqualac AYD-802 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material ...展开 Aqualac AYD-802 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material has stronger impact resistance and flexibility. It is mainly used in coating and painting business. Aqualac AYD-802 has and epoxy equivalent of 600~700 (g/eq) and softening point of 81~89 (℃). 收起 | |
| Aqualac AYD-803 | Aquent Impex | Aqualac AYD-803 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material ...展开 Aqualac AYD-803 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material has stronger impact resistance and flexibility. It is mainly used in coating and painting business. Aqualac AYD-803 has and epoxy equivalent of 700~900 (g/eq) and softening point of 90~96 (℃). 收起 | |
| Aqualac AYD-803U | Aquent Impex | Aqualac AYD-804 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material ...展开 Aqualac AYD-804 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material has stronger impact resistance and flexibility. It is mainly used in coating and painting business. Aqualac AYD-804 has and epoxy equivalent of 900~1000 (g/eq) and softening point of 96~107 (℃). 收起 | |
| Aqualac AYD-804 | Aquent Impex | Aqualac AYD-804 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material ...展开 Aqualac AYD-804 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material has stronger impact resistance and flexibility. It is mainly used in coating and painting business. Aqualac AYD-804 has and epoxy equivalent of 900~1000 (g/eq) and softening point of 96~107 (℃). 收起 | |
| Aqualac AYDPG- 660 | Aquent Impex | Aqualac AYDPG- 660 is a nonpoisonous, non-harmful epoxy resin. It is suitable for adhesives, casting, coatings, and non-solvent paints. It has an epoxy equivalent of 140-200 (g/eq). | |
| Aqualac AYDPG- 669 | Aquent Impex | Aqualac AYDPG- 669 is a nonpoisonous, non-harmful epoxy resin. It is suitable for adhesives, casting, coatings, and non-solvent paints. It has an epoxy equivalent of 125-143 (g/eq). | |
| Aqualac AYDPG-300 | Aquent Impex | Aqualac AYDPG-300 is a nonpoisonous, non-harmful epoxy resin. It is suitable for adhesives, casting, coatings, and non-solvent paints. It has an epoxy equivalent of 285-310 (g/eq). | |
| Aqualac AYDW-112W50 | Aquent Impex | Aqualac AYDW-112W50 is a waterborne Epoxy resin that has wonderful prospect of application due to its properties. Especially in terms of the application of this epoxy resin in combination with cement mortar, the introduction of hydrophilic groups into epo...展开 Aqualac AYDW-112W50 is a waterborne Epoxy resin that has wonderful prospect of application due to its properties. Especially in terms of the application of this epoxy resin in combination with cement mortar, the introduction of hydrophilic groups into epoxy makes this high performance organic & inorganic compound available with the high performance epoxy resin as a precondition. The outstanding advantage of waterborne epoxy resin lies on that this compound can be cured at atmospheric temperature & humidity with reasonable curing time. It can be mixed with such common cement-based material as cement mortar & concrete to enhance the early strength, tenacity, impact resistance & waterproof ability of above materials with very high cross-linking density. Applications include environmentally friendly, paint, car coatings, and cement floors. 收起 | |
| Aqualac AYDW-113W50 | Aquent Impex | Aqualac AYDW-112W50 is a waterborne Epoxy resin that has wonderful prospect of application due to its properties. Especially in terms of the application of this epoxy resin in combination with cement mortar, the introduction of hydrophilic groups into epo...展开 Aqualac AYDW-112W50 is a waterborne Epoxy resin that has wonderful prospect of application due to its properties. Especially in terms of the application of this epoxy resin in combination with cement mortar, the introduction of hydrophilic groups into epoxy makes this high performance organic & inorganic compound available with the high performance epoxy resin as a precondition. The outstanding advantage of waterborne epoxy resin lies on that this compound can be cured at atmospheric temperature & humidity with reasonable curing time. It can be mixed with such common cement-based material as cement mortar & concrete to enhance the early strength, tenacity, impact resistance & waterproof ability of above materials with very high cross-linking density. Applications include environmentally friendly, paint, car coatings, and cement floors. 收起 | |
| Aromatic C9 Hydrocarbon Resin Aquatac I100 | Aquent Impex | Aromatic C9 Hydrocarbon Resin Aquatac I100 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer...展开 Aromatic C9 Hydrocarbon Resin Aquatac I100 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aromatic C9 Hydrocarbon Resin Aquatac I100 has an Gardner colour value of 3-4. 收起 | |
| Aromatic C9 Hydrocarbon Resin Aquatac I120S | Aquent Impex | Aromatic C9 Hydrocarbon Resin Aquatac I120S is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polyme...展开 Aromatic C9 Hydrocarbon Resin Aquatac I120S is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aromatic C9 Hydrocarbon Resin Aquatac I120S has an Gardner colour value of 4-5. 收起 | |
| Aromatic C9 Hydrocarbon Resin Aquatac I140 | Aquent Impex | Aromatic C9 Hydrocarbon Resin Aquatac I140 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer...展开 Aromatic C9 Hydrocarbon Resin Aquatac I140 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aromatic C9 Hydrocarbon Resin Aquatac I140 has an Gardner colour value of 5-6. 收起 | |
| C Glass Flake GF007/C | Glassflake Ltd | C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展开 C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| C Glass Flake GF750/C | Glassflake Ltd | C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展开 C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| C Glass Flake GF750MC | Glassflake Ltd | C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in...展开 C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF001 | Glassflake Ltd | ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展开 ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF002 | Glassflake Ltd | ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展开 ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF003 | Glassflake Ltd | ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展开 ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF005 | Glassflake Ltd | ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties ...展开 ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF007 | Glassflake Ltd | ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展开 ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100M (Milled) | Glassflake Ltd | ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展开 ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展开 ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展开 ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展开 ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF350nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展开 ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF350nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展开 ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500M (Milled) | Glassflake Ltd | ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展开 ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展开 ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展开 ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展开 ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750M (Milled) | Glassflake Ltd | ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展开 ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展开 ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展开 ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展开 ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| Enamel Grade Titanium Dioxide HTD-E | Hoten Chemical International Group | Enamel Grade Titanium Dioxide HTD-E is a white powder made from a sulfuric acid process. This product has a strong opacity making a thin, smooth and acid resistant coating used in enamel and coloring material. | |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| Greesol™ A04 A | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 A is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the produc...展开 Greesol™ A04 A is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a 2-Ethylhexanol solvent based product. 收起 | |
| Greesol™ A04 BC | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 BC is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the produ...展开 Greesol™ A04 BC is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a 2-Butoxylethanol solvent based product. 收起 | |
| Greesol™ A04 DPM | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 DPM is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the prod...展开 Greesol™ A04 DPM is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a Dipropandiol monomethanol ether solvent based product. 收起 | |
| Greesol™ A04 E | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 E is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the produc...展开 Greesol™ A04 E is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a Ethandiol solvent based product. 收起 | |
| Greesol™ A04 NP | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 NP is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the produ...展开 Greesol™ A04 NP is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a Propanol solvent based product. 收起 | |
| Greesol™ A04 PA | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 PA is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the produ...展开 Greesol™ A04 PA is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a Isopropanol solvent based product. 收起 | |
| Greesol™ A04 PG | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 PG is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the produ...展开 Greesol™ A04 PG is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a Propandiol solvent based product. 收起 | |
| Greesol™ A04 SQR | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 SQR is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the prod...展开 Greesol™ A04 SQR is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive and paint and dye manufacturing. It is a solvent based product according to user needs. 收起 | |
| Greesol™ A06 DPM | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A06 DPM is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, ...展开 Greesol™ A06 DPM is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, and printing inks. This product contains 55% dipropylene glycol monomethyl ether based solvent. 收起 | |
| Greesol™ A06 E | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A06 E is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, an...展开 Greesol™ A06 E is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, and printing inks. This product contains 55% dipropylene glycol monomethyl ether based solvent. 收起 | |
| Greesol™ A06 PA | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A06 PA is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, a...展开 Greesol™ A06 PA is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, and printing inks. This product contains 55% dipropylene glycol monomethyl ether based solvent. 收起 | |
| Greesol™ A06 SQR | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A06 SQR is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, ...展开 Greesol™ A06 SQR is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, and printing inks. The dipropylene glycol monomethyl ether percentage can be customized per request. 收起 | |
| Greesol™ ASE | Chem Additive (YueYang) Co.,Ltd. | Greesol™ ASE surfactant is a gemini based nonionic additive that can reduce static surface tension and dynamic surface tension of waterborne systems. This product is well suited in the production of waterborne industrial coatings, wood lacquers, plastic c...展开 Greesol™ ASE surfactant is a gemini based nonionic additive that can reduce static surface tension and dynamic surface tension of waterborne systems. This product is well suited in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV and laminating adhesives. 收起 | |
| Greesol™ DF11 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DF11 is a non-silicone, mineral oil-free defoamer. It is characterized as possessing persistent foam suppression. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo inks...展开 Greesol™ DF11 is a non-silicone, mineral oil-free defoamer. It is characterized as possessing persistent foam suppression. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo inks, intaglio inks, OPV, and laminating adhesives. 收起 | |
| Greesol™ DF42 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DF42 is a silica-based defoamer. This miscible product is well suited for use in paints, inks, emulsion polymerization processes, and adhesive foam control. | |
| Greesol™ DF901 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DF901 is a miscible polyether modified silicone water-based defoamer. Its content of non-volatile substances is 85%. This product is well suited for the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, a...展开 Greesol™ DF901 is a miscible polyether modified silicone water-based defoamer. Its content of non-volatile substances is 85%. This product is well suited for the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, and OPV. 收起 | |
| Greesol™ DF975 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DF975 is a polyether modified silicone water-based defoamer. Its content of non-volatile substances is 100%. This product is well suited for the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, and OPV. | |
| Greesol™ DFM | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DFM is a polyether modified silicone water-based defoamer. Its content of non-volatile substances is 60%. This product is well suited for use in the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, OPV. | |
| Greesol™ DP1600 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DP1600 is a wetting and dispersing agent that can be applied in resin and resin-free colorant systems. It has anionic and non-ionic properties. This product has a low viscosity and is suitable for carbon black and organic pigment dispersion. Its ...展开 Greesol™ DP1600 is a wetting and dispersing agent that can be applied in resin and resin-free colorant systems. It has anionic and non-ionic properties. This product has a low viscosity and is suitable for carbon black and organic pigment dispersion. Its active ingredient content is 80%. 收起 | |
| Greesol™ DPB | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DPB is a non-ionic class wetting and dispersing agent that can be applied in resin and resin-free colorant systems. It has a Low viscosity and is suitable for carbon black and organic pigment dispersion. Its active ingredient content is 100% | |
| Greesol™ E20 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ E20 is a multifunctional surfactant and gemini nonionic surfactant containing 20% of ethylene oxide. It is widely applied to waterborne printing ink. This product is well suit for use in fountain solutions for offset printing applications. This p...展开 Greesol™ E20 is a multifunctional surfactant and gemini nonionic surfactant containing 20% of ethylene oxide. It is widely applied to waterborne printing ink. This product is well suit for use in fountain solutions for offset printing applications. This product will not cause rubber roller swelling. 收起 | |
| Greesol™ E40 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ E40 is a multifunctional surfactant and gemini nonionic surfactant containing 40% of ethylene oxide. It can be used to improve the coatability of low surface energy substrates such as silane, release paper or plastic film. This product is well su...展开 Greesol™ E40 is a multifunctional surfactant and gemini nonionic surfactant containing 40% of ethylene oxide. It can be used to improve the coatability of low surface energy substrates such as silane, release paper or plastic film. This product is well suit for use in fountain solutions for offset printing applications. This product will not cause rubber roller swelling. 收起 | |
| Greesol™ E65 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ E65 is a multifunctional surfactant and gemini nonionic surfactant containing 65% of ethylene oxide and has wetting, defoaming, flow and leveling capabilities. It can be used to improve in the fluency of dye-based and pigment-based ink jet ink. T...展开 Greesol™ E65 is a multifunctional surfactant and gemini nonionic surfactant containing 65% of ethylene oxide and has wetting, defoaming, flow and leveling capabilities. It can be used to improve in the fluency of dye-based and pigment-based ink jet ink. This product can also be use as a gloss agent in a electroplating and pickling solution. 收起 | |
| Greesol™ E85 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ E85 is a multifunctional surfactant and gemini nonionic surfactant containing 85% of ethylene oxide. It can be used to improve in the fluency of dye-based and pigment-based ink jet ink. This product can be also be used as a gloss agent in a elect...展开 Greesol™ E85 is a multifunctional surfactant and gemini nonionic surfactant containing 85% of ethylene oxide. It can be used to improve in the fluency of dye-based and pigment-based ink jet ink. This product can be also be used as a gloss agent in a electroplating and pickling solution. 收起 | |
| Greesol™ F06 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ F06 is a silicone-based surfactant that reduces surface tension and provides good wetting spreadability. This product is well suited for the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, a...展开 Greesol™ F06 is a silicone-based surfactant that reduces surface tension and provides good wetting spreadability. This product is well suited for the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, and OPV. 收起 | |
| Greesol™ F07 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ F07 surfactant is a gemini low-foam nonionic wetting agent. It can reduce static surface tension and dynamic surface tension to promote the wetting of base materials of many waterborne systems. This product can be used in the production of waterb...展开 Greesol™ F07 surfactant is a gemini low-foam nonionic wetting agent. It can reduce static surface tension and dynamic surface tension to promote the wetting of base materials of many waterborne systems. This product can be used in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, and OPV. 收起 | |
| Greesol™ FS85 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ FS85 surfactant is a gemini based nonionic additive that can reduce static surface tension and dynamic surface tension of waterborne systems and is specially developed for fountain solutions with little to no alcohol content. This product is suit...展开 Greesol™ FS85 surfactant is a gemini based nonionic additive that can reduce static surface tension and dynamic surface tension of waterborne systems and is specially developed for fountain solutions with little to no alcohol content. This product is suitable for use in commercial printing presses, and been shown to be effective in clear edge of printing dots and does not cause excessive ink emulsion in ink jet inks. 收起 | |
| Greesol™ LE5 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ LE5 is a water-dispersible leveling agent. This product is a multifunctional additive that reduces friction and is abrasion resistant. This product is well suited for the production of fountain solutions, metal cleaners, inkjet inks, adhesives, w...展开 Greesol™ LE5 is a water-dispersible leveling agent. This product is a multifunctional additive that reduces friction and is abrasion resistant. This product is well suited for the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, and OPV. 收起 | |
| Greesol™ LE7 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ LE7 is a polyorganosiloxane leveling agent that can improve paint flow, reduce cellulite, improve brightness, prevent air bubbles and pinholes. The content of non-volatile substances is 40%. This product is well suited for use in the production o...展开 Greesol™ LE7 is a polyorganosiloxane leveling agent that can improve paint flow, reduce cellulite, improve brightness, prevent air bubbles and pinholes. The content of non-volatile substances is 40%. This product is well suited for use in the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, and OPV. 收起 | |
| Greesol™ LE8 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ LE8 is a ultra-high molecular weight polyether silicone leveling agent. It can be used for UV and aqueous formulation systems. It has a low friction coefficient, smooth feel, good leveling, low foam stability, and resistance to shrinkage. The con...展开 Greesol™ LE8 is a ultra-high molecular weight polyether silicone leveling agent. It can be used for UV and aqueous formulation systems. It has a low friction coefficient, smooth feel, good leveling, low foam stability, and resistance to shrinkage. The content of non-volatile substances is 40%. This product is well suited for use in the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, and OPV. 收起 | |
| HTM-A Barium Sulphate Modified | Hoten Chemical International Group | HTM-A Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creati...展开 HTM-A Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTM-B Barium Sulphate Modified | Hoten Chemical International Group | HTM-B Barium Sulphate Modified is a function filler of nanometer-class developed for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure v...展开 HTM-B Barium Sulphate Modified is a function filler of nanometer-class developed for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTM-C Barium Sulphate Modified | Hoten Chemical International Group | HTM-C Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creati...展开 HTM-C Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTN-NO Barium Sulfate Natural | Hoten Chemical International Group | HTN-NO Barium Sulfate Natural is a natural function filler that can be used in paint and improve concentration of coatings. | |
| HTN-NP Barium Sulfate Natural | Hoten Chemical International Group | HTN-NP Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NQ Barium Sulfate Natural | Hoten Chemical International Group | HTN-NQ Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. |
