| Advantage™ AM1512A | Ashland | Advantage™ AM1512A is a 100% active foam control agent designed specifically for use in water-based paint systems. It is a high efficiency, hydrocarbon oil-based antifoaming agent and is formulated to control foam at any point during manufacture, packagin...展开 Advantage™ AM1512A is a 100% active foam control agent designed specifically for use in water-based paint systems. It is a high efficiency, hydrocarbon oil-based antifoaming agent and is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH and it is effective in the presence of many surfactants. Advantage™ AM1512A foam control agent is readily dispersible, has an outstanding long-term foam control persistency, and Advantage™ AW8176 defoamer is readily dispersible, has very good long-term persistency, and it is recommended for architectural paints, emulsions plasters, pigment/filler slurries, as well as industrial wood coatings. 收起 | |
| Aquaflow™ NHS-300 | Ashland | Aquaflow™ NHS-300 is a rheology modifier for waterborne architectural coatings. A solvent-free, nonionic associative polymer solution designed to increase high-shear viscosity and provide superior flow and leveling in latex paints. | |
| Aquaflow™ NHS-350 | Ashland | Aquaflow™ NHS-350 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. | |
| Aquaflow™ NHS-355 | Ashland | Aquaflow™ NHS-355 rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development...展开 Aquaflow™ NHS-355 rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build, and favorable brush drag. As an APEO-free and solvent-free product, Aquaflow™ NHS-355 rheology modifier is recommended for low VOC formulations. It is supplied as a low viscosity liquid for ease of handling. The performance of the product is independent of paint pH 收起 | |
| Aquaflow™ NHS-360 | Ashland | Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings, and is compatible with most modern latex resin systems and all sheens. This thickener prov...展开 Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings, and is compatible with most modern latex resin systems and all sheens. This thickener provides highly efficient ICI viscosity development, excellent film build, optimal flow and leveling and favorable brush drag. 收起 | |
| Aquaflow™ NLS-200 | Ashland | Aquaflow™ NLS-200 is a rheology modifier for waterborne architectural coatings. A nonionic associative polymer solution designed to build stormer viscosity and provide superior flow and leveling in latex paints. | |
| Aquaflow™ NLS-210 | Ashland | Aquaflow™ NLS-210 is a nonionic associative polymer solution designed to increase Stormer consistency and provide superior flow and leveling in waterborne paints and coatings. | |
| Aquaflow™ NLS-220 | Ashland | Aquaflow™ NLS-220 is a solvent free nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. It can be used with a wide variety of binder chemistries including v...展开 Aquaflow™ NLS-220 is a solvent free nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. It can be used with a wide variety of binder chemistries including vinyl acrylics, ethylene vinyl acetates, alkyd emulsions and in particular pure acrylics and styrene acrylics. It rapidly equilibrates to target low- or mid-shear viscosity with no negative impact on gloss or color stability. 收起 | |
| Aquaflow™ NMS-450 | Ashland | Aquaflow™ NMS-450 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. | |
| Aquaflow™ NMS-460E | Ashland | Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of S...展开 Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of Stormer (KU) viscosity along with high-shear (ICI) viscosity, and thus can be considered a mid-shear effective thickener that can function as the sole thickener in many paint formulation based on hydrophobic resins, such as acrylics and styrene acrylics. With more hydrophilic resins, such as vinyl acetate ethylene (VAE), optimized rheology may be achieved with Aquaflow™ NMS-460E rheology modifier alone or in combination with a supplemental KU driver. 收起 | |
| Aquaflow™ XLS-500 | Ashland | Aquaflow™ XLS-500 is non-ionic synthetic associative rheology modifier for low-VOC acrylic based paints & coatings. | |
| Aquaflow™ XLS-525 | Ashland | Aquaflow™ XLS-525 is a non-ionic synthetic associative rheology modifier for low-VOC paints and coatings. | |
| Aquaflow™ XLS-530 | Ashland | Aquaflow™ XLS-530 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. | |
| Benox® A-70 | UNITED INITIATORS GMBH & CO KG | Benox® A-70, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated p...展开 Benox® A-70, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated polyester resins and vinyl monomers, when the presence of water is not detrimental. Benox® A-70 has other uses, which include drying agents for printing inks, organic chemical synthesis, and vulcanization of synthetic and natural rubber. 收起 | |
| Benox® A-75 | UNITED INITIATORS GMBH & CO KG | Benox® A-75, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated p...展开 Benox® A-75, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated polyester resins and vinyl monomers, when the presence of water is not detrimental. Benox® A-75 has other uses, which include drying agents for printing inks, organic chemical synthesis, and vulcanization of synthetic and natural rubber. 收起 | |
| Benox® A-80 | UNITED INITIATORS GMBH & CO KG | Benox® A-80, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated p...展开 Benox® A-80, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated polyester resins and vinyl monomers, when the presence of water is not detrimental. Benox® A-80 has other uses, which include drying agents for printing inks, organic chemical synthesis, and vulcanization of synthetic and natural rubber. 收起 | |
| Benox® B-50 | UNITED INITIATORS GMBH & CO KG | Benox® B-50 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent...展开 Benox® B-50 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B-50 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起 | |
| Benox® B50-106 | UNITED INITIATORS GMBH & CO KG | Benox® B50-106 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy white paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polyme...展开 Benox® B50-106 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy white paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-106 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起 | |
| Benox® B50-210 | UNITED INITIATORS GMBH & CO KG | Benox® B50-210 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent a...展开 Benox® B50-210 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-210 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起 | |
| Benox® B50-230 | UNITED INITIATORS GMBH & CO KG | Benox® B50-230 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy lighter blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing...展开 Benox® B50-230 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy lighter blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-230 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起 | |
| Benox® B50-513 | UNITED INITIATORS GMBH & CO KG | Benox® B50-513 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy red pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiato...展开 Benox® B50-513 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy red pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-513 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起 | |
| Benox® B50-713 | UNITED INITIATORS GMBH & CO KG | Benox® B50-713 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy onyx pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent a...展开 Benox® B50-713 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy onyx pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-713 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起 | |
| Benox® B55 | UNITED INITIATORS GMBH & CO KG | Benox® B55 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent ...展开 Benox® B55 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B55 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起 | |
| Benox® B55-107 | UNITED INITIATORS GMBH & CO KG | Benox® B55-107 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in industries which require a product to be further diluted prior to use and in the mine bolt ind...展开 Benox® B55-107 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in industries which require a product to be further diluted prior to use and in the mine bolt industry. Benox® B55-107 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起 | |
| Benox® B55-108 | UNITED INITIATORS GMBH & CO KG | Benox® B55-108 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in elevated and ambient temperature curing of unsaturated polyester resins and is characterized b...展开 Benox® B55-108 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in elevated and ambient temperature curing of unsaturated polyester resins and is characterized by its lower water content, compared to Benox® B55-107. Benox® B55-108 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起 | |
| Benox® C-50S | UNITED INITIATORS GMBH & CO KG | Benox® C-50S, in the form of a fine free-flowing non-caking granular powder, is 50% dibenzoyl peroxide, standardized with silica and phthalate ester plasticizer. It can be used as a cure initiator for acrylic resins and unsaturated polyester resins in bot...展开 Benox® C-50S, in the form of a fine free-flowing non-caking granular powder, is 50% dibenzoyl peroxide, standardized with silica and phthalate ester plasticizer. It can be used as a cure initiator for acrylic resins and unsaturated polyester resins in both ambient temperature and elevated temperature cure processes, in combination with amine accelerators. Benox® C-50S dissolves fast in acrylic resins and unsaturated polyester and is easy to disperse. 收起 | |
| Benox® L-40LV | UNITED INITIATORS GMBH & CO KG | Benox® L-40LV, in the form of a white liquid, is a low viscosity, sprayable dispersion of dibenzoyl peroxide. It is designed for use in curing unsaturated vinyl ester and polyester with low water content, less viscosity drift, and is suitable for the cure...展开 Benox® L-40LV, in the form of a white liquid, is a low viscosity, sprayable dispersion of dibenzoyl peroxide. It is designed for use in curing unsaturated vinyl ester and polyester with low water content, less viscosity drift, and is suitable for the cure of road marking paints based on acrylic resins. 收起 | |
| Cobalt Green P2050 | Dongguan Hailerui Chemical Co., Ltd. | Cobalt Green P2050 is an inorganic pigment that appears as a green powder. This product has an oil absorption of 16-20 and a pH value of 8.1. It can be used in traffic paint and industrial coatings. | |
| Copper Chromite Black P2028 | Dongguan Hailerui Chemical Co., Ltd. | Copper Chromite Black P2028 is an inorganic pigment that appears as a black powder. This product has an oil absorption of 17-26 and a moisture content of <0.2%. It can be used in high temperature inks and paints. | |
| Culminal™ C-types modified cellulose ethers | Ashland | Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plas...展开 Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plasters, fillers, adhesives and spackling compounds, cement and lime based plasters, tile cements and similar products. 收起 | |
| Curox® I-200 | UNITED INITIATORS GMBH & CO KG | Curox® I-200, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl isobutyl ketone that has been de-sensitized with aliphatic hydrocarbons. It is used as an initiator (radical source) in the curing of unsaturated p...展开 Curox® I-200, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl isobutyl ketone that has been de-sensitized with aliphatic hydrocarbons. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and gel coats. 收起 | |
| Curox® I-300 | UNITED INITIATORS GMBH & CO KG | Curox® I-300, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl isobutyl ketone that has been de-sensitized with aliphatic hydrocarbons. It is used as an initiator (radical source) in the curing of unsaturated p...展开 Curox® I-300, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl isobutyl ketone that has been de-sensitized with aliphatic hydrocarbons. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and gel coats. 收起 | |
| Curox® M-100 | UNITED INITIATORS GMBH & CO KG | Curox® M-100, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-100, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
| Curox® M-102 | UNITED INITIATORS GMBH & CO KG | Curox® M-102, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester r...展开 Curox® M-102, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
| Curox® M-103 | UNITED INITIATORS GMBH & CO KG | Curox® M-103, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-103, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
| Curox® M-104 | UNITED INITIATORS GMBH & CO KG | Curox® M-104, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-104, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
| Curox® M-180 | UNITED INITIATORS GMBH & CO KG | Curox® M-180, in the form of a slightly yellowish liquid, is ketone peroxide consisting of a blend based on lower reactive methyl ethyl ketone and perester, which has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical sourc...展开 Curox® M-180, in the form of a slightly yellowish liquid, is ketone peroxide consisting of a blend based on lower reactive methyl ethyl ketone and perester, which has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and gel-coats. 收起 | |
| Curox® M-200 | UNITED INITIATORS GMBH & CO KG | Curox® M-200, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-200, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
| Curox® M-202 | UNITED INITIATORS GMBH & CO KG | Curox® M-202, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester r...展开 Curox® M-202, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
| Curox® M-300 | UNITED INITIATORS GMBH & CO KG | Curox® M-300, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-300, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
| Curox® M-302 | UNITED INITIATORS GMBH & CO KG | Curox® M-302, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester r...展开 Curox® M-302, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
| Curox® M-302R | UNITED INITIATORS GMBH & CO KG | Curox® M-302R, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester ...展开 Curox® M-302R, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
| Curox® M-303 | UNITED INITIATORS GMBH & CO KG | Curox® M-303, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-303, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
| Curox® M-303R | UNITED INITIATORS GMBH & CO KG | Curox® M-303R, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated poly...展开 Curox® M-303R, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
| Curox® M-312 | UNITED INITIATORS GMBH & CO KG | Curox® M-312, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester r...展开 Curox® M-312, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
| Curox® M-312R | UNITED INITIATORS GMBH & CO KG | Curox® M-312R, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester ...展开 Curox® M-312R, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
| Curox® M-340 | UNITED INITIATORS GMBH & CO KG | Curox® M-340, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-340, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
| Curox® M-403 | UNITED INITIATORS GMBH & CO KG | Curox® M-403, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-403, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and gel-coats. 收起 | |
| Curox® MCH | UNITED INITIATORS GMBH & CO KG | Curox® MCH, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyest...展开 Curox® MCH, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起 | |
| Curox® VP-160A | UNITED INITIATORS GMBH & CO KG | Curox® VP-160A, in the form of a slightly yellowish liquid, is a product that consists of a mixture based on hydroperoxide. It is used in combination with cobalt accelerators as an initiator (radical source) in the curing of unsaturated vinyl ester resins...展开 Curox® VP-160A, in the form of a slightly yellowish liquid, is a product that consists of a mixture based on hydroperoxide. It is used in combination with cobalt accelerators as an initiator (radical source) in the curing of unsaturated vinyl ester resins, coatings, and Novolac resins at ambient temperature. 收起 | |
| Dextrol™ OC-110 | Ashland | Dextrol™ OC-110 is the free-acid form of a nonyl phenol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-15 | Ashland | Dextrol™ OC-15 is the free acid form of a nonyl phenol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-180 | Ashland | 它是一种乙氧基化脂肪醇磷酸酯的中和态（钾盐）。它设计用于为水性乳胶漆改善光泽度和颜色接受性 | |
| Dextrol™ OC-180HS Phosphate Ester Surfactant | Ashland | Dextrol™ OC-180HS表面活性剂是乙氧基脂肪醇磷酸酯的中和（钠盐）形式。它设计用于改善光泽度和在水性乳胶漆中的色彩接受度。根据配方的不同特点，这款产品还可以用作有助于减少颜料凝絮的补充分散剂。除了在乳胶漆中使用，Dextrol™ OC-180HS表面活性剂还可以提供普遍着色特性，有助于分散和稳定颜料，从而改善水基油漆的色彩接受度。 | |
| Dextrol™ OC-50 | Ashland | Dextrol™ OC-50 is the neutralized (sodium salt) form of a nonyl phenol ethoxylated phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. | |
| Dextrol™ OC-60 | Ashland | Dextrol™ OC-60 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-60EP | Ashland | Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...展开 Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-60EP surfactant can be neutralized using several organic or inorganic bases. Dextrol OC-60EP surfactant also imparts improved gloss and color acceptance in waterborne latex paints. 收起 | |
| Dextrol™ OC-70 | Ashland | Dextrol™ OC-70 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-70EP | Ashland | Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...展开 Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-70EP phosphate ester surfactant can be neutralized by the user using a number of organic or inorganic bases. 收起 | |
| Drewplus* L-3500 Foam Control Agent | Ashland | Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spr...展开 Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spray, air mix or HVLP. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. 收起 | |
| Drewplus™ L-3510 Foam Control Agent | Ashland | Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatib...展开 Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. 收起 | |
| Drewplus™ TS-4384 Foam Control Agent | Ashland | Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-glos...展开 Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss acrylic architectural paints, water- based parquet lacquers. Excellent results have also been obtained in acrylic anti- corrosive primers, flexographic printing inks and water-reducible alkyd based systems. Drewplus™ TS-4384 foam control agent is highly efficient and exhibits excellent persistency. 收起 | |
| Drewplus™ TS-4481 Foam Control Agent | Ashland | Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and c...展开 Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and compatibility. Since it functions as an air release agent it is particularly effective on microfoam in spray-applied industrial coatings. 收起 | |
| Enamel Grade Titanium Dioxide HTD-E | Hoten Chemical International Group | Enamel Grade Titanium Dioxide HTD-E is a white powder made from a sulfuric acid process. This product has a strong opacity making a thin, smooth and acid resistant coating used in enamel and coloring material. | |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| Hailerui Cadmium Red P2018 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Cadmium Red P2018 is an inorganic pigment that appears as a red powder. This product has an oil absorption of 16-23 and a moisture content of <0.5%. It can be used in paints, coatings, and art gravure painting inks. | |
| Hailerui Cadmium Yellow P2037-1 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Cadmium Yellow P2037-1 is an inorganic pigment that appears as a yellow powder. This product has an oil absorption of 27-30 and a moisture content of <0.5%. It can be used in traffic paints and printing inks. | |
| Hailerui Cadmium Yellow P2037-4 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Cadmium Yellow P2037-4 is an inorganic pigment that appears as a yellow powder. This product has an oil absorption of 27-30 and a moisture content of <0.5%. It can be used in traffic paints and printing inks. | |
| Hailerui Cadmium Yellow P2037-5 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Cadmium Yellow P2037-5 is an inorganic pigment that appears as a yellow powder. This product has an oil absorption of 27-30 and a moisture content of <0.5%. It can be used in traffic paints and printing inks. | |
| Hailerui Cobalt Blue P2008 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Cobalt Blue P2008 is an inorganic pigment that appears as a bright blue powder. This product has an oil absorption of 18-25 g/100g and a pH value of 7.5. It can be used in paints and industrial coatings. | |
| Hailerui Permanent Violet P.V.23BL | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Permanent Violet P.V.23BL is a high performance organic pigment that appears as a violet powder. This product has an oil absorption of 38-53 g/100g and a pH value of 6.2. It can be used in paints, printing inks, and textiles. | |
| Hailerui Permanent Violet P.V.23RL | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Permanent Violet P.V.23RL is a high performance organic pigment that appears as a violet powder. This product has an oil absorption of 38-53 g/100g and a pH value of 6.2. It can be used in paints, printing inks, and textiles. | |
| Hailerui Phthalocyanine Blue P.B.15:0 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Phthalocyanine Blue P.B.15:0 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints. | |
| Hailerui Phthalocyanine Blue P.B.15:1 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Phthalocyanine Blue P.B.15:1 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints. | |
| Hailerui Phthalocyanine Blue P.B.15:2 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Phthalocyanine Blue P.B.15:2 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints. | |
| Hailerui Phthalocyanine Blue P.B.15:3 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Phthalocyanine Blue P.B.15:3 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints. | |
| Hailerui Phthalocyanine Blue P.B.15:4 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Phthalocyanine Blue P.B.15:4 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints. | |
| Hailerui Phthalocyanine Green PG7 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Phthalocyanine Green PG7 is an organic copper pigment that appears as a dark green powder. This product has an oil absorption of 30-45 g/100g and a pH value of 6.5-8. It can be used in coatings, paints, inks, and printing paste. | |
| Hailerui Titanium Yellow 42-118A | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Titanium Yellow 42-118A is an inorganic pigment that appears as a brown powder. This product has an oil absorption of 11-17 and a moisture content of <0.2%. It can be used in road sign coatings, powder coatings, paints, and printing inks. | |
| Hailerui Titanium Yellow K2001 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Titanium Yellow K2001 is an inorganic pigment that appears as a brown powder. This product has an oil absorption of 11-17 and a moisture content of <0.2%. It can be used in road sign coatings, powder coatings, paints, and printing inks. | |
| Hailerui Titanium Yellow K2001FG | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Titanium Yellow K2001FG is an inorganic pigment that appears as a brown powder. This product has an oil absorption of 11-17 and a moisture content of <0.2%. It can be used in road sign coatings, powder coatings, paints, and printing inks. | |
| Hailerui Titanium Yellow TY-300 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Titanium Yellow TY-300 is an inorganic pigment that appears as a dark yellow powder. This product has an oil absorption of 11-17 and a moisture content of <0.2%. It can be used in road sign coatings, powder coatings, paints, and printing inks. | |
| Hailerui Ultramarine Blue 5008 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue 5008 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| Hailerui Ultramarine Blue EP-19 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue EP-19 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| Hailerui Ultramarine Blue EP-25 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue EP-25 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. |
