UL Prospector

成功!

成功保存搜索结果
3D-1 Shanghai HuZheng Nano Technology Co., Ltd. 3D-1 is a conductive, transparent, colorless to light yellow liquid polymer used to provide anti-static properties by increasing the conductivity of solvent-based paints and coatings. It provides an electrical resistance of up to 100,000,000 Ω / cm witho...展开 3D-1 is a conductive, transparent, colorless to light yellow liquid polymer used to provide anti-static properties by increasing the conductivity of solvent-based paints and coatings. It provides an electrical resistance of up to 100,000,000 Ω / cm without significant change of other properties such as color, UV resistance and transparency. 收起
AGP-P010 Shanghai HuZheng Nano Technology Co., Ltd. AGP-P010 is a black, ultra-fine nano-silver powder with a particle size of 15 nm. It is used in paints and coatings to provide broad spectrum anti-bacterial and deoderant capabilities. Its small particle size allows it to be added to systems using organic...展开 AGP-P010 is a black, ultra-fine nano-silver powder with a particle size of 15 nm. It is used in paints and coatings to provide broad spectrum anti-bacterial and deoderant capabilities. Its small particle size allows it to be added to systems using organic solvents or aqueous solutions, without affecting the transparency of the final product. 收起
AGP-P025 Shanghai HuZheng Nano Technology Co., Ltd. AGP-P025 is a black, ultra-fine nano-silver powder with a particle size of 15 nm. It is used in paints and coatings to provide broad spectrum anti-bacterial and deoderant capabilities. Its small particle size allows it to be added to systems using organic...展开 AGP-P025 is a black, ultra-fine nano-silver powder with a particle size of 15 nm. It is used in paints and coatings to provide broad spectrum anti-bacterial and deoderant capabilities. Its small particle size allows it to be added to systems using organic solvents or aqueous solutions, without affecting the transparency of the final product. 收起
AGS-MB3000 Shanghai HuZheng Nano Technology Co., Ltd. AGS-MB3000 is a colorless and transparent liquid with 2 nm silver particles. It is used in water-based paints and coatings to provide anti-oxidation, anti-mildew and anti-bacterial properties. It is effective against organisms such as escherichia coli, st...展开 AGS-MB3000 is a colorless and transparent liquid with 2 nm silver particles. It is used in water-based paints and coatings to provide anti-oxidation, anti-mildew and anti-bacterial properties. It is effective against organisms such as escherichia coli, staphylococcus aureus and yellow aspergillus, which makes it useful in paints for hospitals, clean rooms and other areas where a broad spectrum protection is desired. 收起
AGS-MM2000 Shanghai HuZheng Nano Technology Co., Ltd. AGS-MM2000 is a tawny colored solution of silver particles with a diameter of 15 nm. It provides a non-toxic, environmentally safe, broad spectrum bactericide. It can be added to water-based paints and inks, as well as a variety of organic and inorganic ...展开 AGS-MM2000 is a tawny colored solution of silver particles with a diameter of 15 nm. It provides a non-toxic, environmentally safe, broad spectrum bactericide. It can be added to water-based paints and inks, as well as a variety of organic and inorganic solvents. 收起
AGS-WB3000 Shanghai HuZheng Nano Technology Co., Ltd. AGS-WB3000 is a colorless and transparent liquid with 2 nm silver particles. It is used in water-based paints and coatings to provide anti-oxidation, anti-mildew and anti-bacterial properties. It is effective against organisms such as escherichia coli, st...展开 AGS-WB3000 is a colorless and transparent liquid with 2 nm silver particles. It is used in water-based paints and coatings to provide anti-oxidation, anti-mildew and anti-bacterial properties. It is effective against organisms such as escherichia coli, staphylococcus aureus and yellow aspergillus, which makes it useful in paints for hospitals, clean rooms and other areas where a broad spectrum protection is desired. 收起
AGS-WM2000 Shanghai HuZheng Nano Technology Co., Ltd. AGS-WM2000 is a tawny colored solution of silver particles with a diameter of 15 nm. It provides a non-toxic, environmentally safe, broad spectrum bactericide. It can be added to water-based paints and inks, as well as a variety of organic and inorganic ...展开 AGS-WM2000 is a tawny colored solution of silver particles with a diameter of 15 nm. It provides a non-toxic, environmentally safe, broad spectrum bactericide. It can be added to water-based paints and inks, as well as a variety of organic and inorganic solvents. 收起
AGS-WM5000 Shanghai HuZheng Nano Technology Co., Ltd. AGS-WM5000 is a tawny colored solution of silver particles with a diameter of 15 nm. It provides a non-toxic, environmentally safe, broad spectrum bactericide. It can be added to water-based paints and inks, as well as a variety of organic and inorganic ...展开 AGS-WM5000 is a tawny colored solution of silver particles with a diameter of 15 nm. It provides a non-toxic, environmentally safe, broad spectrum bactericide. It can be added to water-based paints and inks, as well as a variety of organic and inorganic solvents. 收起
AGS-WMB1000B Shanghai HuZheng Nano Technology Co., Ltd. AGS-WMB1000B is a colorless, transparent solution containing silver particles with a diameter of 2 nm. It provides good anti-bacterial, anti-mildew and anti-yellowing properties to water-based paints and coatings. It is a broad spectrum bactericide, yet ...展开 AGS-WMB1000B is a colorless, transparent solution containing silver particles with a diameter of 2 nm. It provides good anti-bacterial, anti-mildew and anti-yellowing properties to water-based paints and coatings. It is a broad spectrum bactericide, yet is environmentally safe and non-toxic. 收起
AGS-WMB1000C Shanghai HuZheng Nano Technology Co., Ltd. AGS-WMB1000C is a colorless, transparent solution containing silver particles with a diameter of 2 nm. It provides good anti-bacterial, anti-mildew and anti-yellowing properties to water-based paints and coatings. It is a broad spectrum bactericide, yet ...展开 AGS-WMB1000C is a colorless, transparent solution containing silver particles with a diameter of 2 nm. It provides good anti-bacterial, anti-mildew and anti-yellowing properties to water-based paints and coatings. It is a broad spectrum bactericide, yet is environmentally safe and non-toxic. 收起
AGS-WP001 Shanghai HuZheng Nano Technology Co., Ltd. AGS-WP001 is a tawny colored solution of silver particles with a diameter of 15 nm. It provides a non-toxic, environmentally safe, broad spectrum bactericide. It can be added to water-based paints and inks, as well as a variety of organic and inorganic s...展开 AGS-WP001 is a tawny colored solution of silver particles with a diameter of 15 nm. It provides a non-toxic, environmentally safe, broad spectrum bactericide. It can be added to water-based paints and inks, as well as a variety of organic and inorganic solvents. 收起
AGS-WP005 Shanghai HuZheng Nano Technology Co., Ltd. AGS-WP005 is a tawny colored solution of silver particles with a diameter of 15 nm. It provides a non-toxic, environmentally safe, broad spectrum bactericide. It can be added to water-based paints and inks, as well as a variety of organic and inorganic s...展开 AGS-WP005 is a tawny colored solution of silver particles with a diameter of 15 nm. It provides a non-toxic, environmentally safe, broad spectrum bactericide. It can be added to water-based paints and inks, as well as a variety of organic and inorganic solvents. 收起
ATO-050 Shanghai HuZheng Nano Technology Co., Ltd. ATO-050 is a blue liquid comprised of ultrafine, 10 nm particles of antimony tin oxide. It can be used in paints and coatings to provide transparent conductivity between 104 and 106 Ω.cm2. In addition to anti-static and conductive properties, the coating...展开 ATO-050 is a blue liquid comprised of ultrafine, 10 nm particles of antimony tin oxide. It can be used in paints and coatings to provide transparent conductivity between 104 and 106 Ω.cm2. In addition to anti-static and conductive properties, the coatings using this easily dispersed additive will exhibit good heat, moisture and infrared resistance. 收起
ATO-MP010 Shanghai HuZheng Nano Technology Co., Ltd. ATO-MP010 is a blue liquid containing condensed ATO particles of 10 nm and 50-60 nm. It is a 10% concentration, solvent-based solution used to add UV protection to paints and coatings. It has a transparency greater than 85% and can be used with solvents s...展开 ATO-MP010 is a blue liquid containing condensed ATO particles of 10 nm and 50-60 nm. It is a 10% concentration, solvent-based solution used to add UV protection to paints and coatings. It has a transparency greater than 85% and can be used with solvents such as water, ethyl acetate, methyl ethyl ketone and toluene. 收起
ATO-MP020 Shanghai HuZheng Nano Technology Co., Ltd. ATO-MP020 is a blue liquid containing condensed ATO particles of 10 nm and 50-60 nm. It is a 10% concentration, solvent-based solution used to add UV protection to paints and coatings. It has a transparency greater than 85% and can be used with solvents s...展开 ATO-MP020 is a blue liquid containing condensed ATO particles of 10 nm and 50-60 nm. It is a 10% concentration, solvent-based solution used to add UV protection to paints and coatings. It has a transparency greater than 85% and can be used with solvents such as water, ethyl acetate, methyl ethyl ketone and toluene. 收起
ATO-MP030 Shanghai HuZheng Nano Technology Co., Ltd. ATO-MP030 is a blue liquid containing condensed ATO particles of 10 nm and 50-60 nm. It is a 10% concentration, solvent-based solution used to add UV protection to paints and coatings. It has a transparency greater than 85% and can be used with solvents s...展开 ATO-MP030 is a blue liquid containing condensed ATO particles of 10 nm and 50-60 nm. It is a 10% concentration, solvent-based solution used to add UV protection to paints and coatings. It has a transparency greater than 85% and can be used with solvents such as water, ethyl acetate, methyl ethyl ketone and toluene. 收起
DT-P100 Shanghai HuZheng Nano Technology Co., Ltd. DT-P100 is a conductive carbon powder with a particle size of less than 25 nm. It can be used in anti-static undercoatings on flooring, conductive and anti-static inks and to create paints and coatings which are resistant to electromagnetic wave radiation...展开 DT-P100 is a conductive carbon powder with a particle size of less than 25 nm. It can be used in anti-static undercoatings on flooring, conductive and anti-static inks and to create paints and coatings which are resistant to electromagnetic wave radiation. 收起
Enamel Grade Titanium Dioxide HTD-E Hoten Chemical International Group Enamel Grade Titanium Dioxide HTD-E is a white powder made from a sulfuric acid process. This product has a strong opacity making a thin, smooth and acid resistant coating used in enamel and coloring material.
ExBar™ 200 Excalibar Minerals LLC ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9.
ExBar™ 325 Excalibar Minerals LLC ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10.
ExBar™ 400 Excalibar Minerals LLC ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12.
ExBar™ W 1 Excalibar Minerals LLC ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起
ExBar™ W 2 Excalibar Minerals LLC ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起
ExBar™ W 3 Excalibar Minerals LLC ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起
ExBar™ W 325 Excalibar Minerals LLC ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起
ExBar™ W 4 Excalibar Minerals LLC ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起
ExBar™ W 400 Excalibar Minerals LLC ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起
ExCal® 100 Excalibar Minerals LLC ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 200 Excalibar Minerals LLC ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 325 Excalibar Minerals LLC ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 400 Excalibar Minerals LLC ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® CW 100 Excalibar Minerals LLC ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
ExCal® CW 200 Excalibar Minerals LLC ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
ExCal® CW 325 Excalibar Minerals LLC ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
HTM-A Barium Sulphate Modified Hoten Chemical International Group HTM-A Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creati...展开 HTM-A Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起
HTM-B Barium Sulphate Modified Hoten Chemical International Group HTM-B Barium Sulphate Modified is a function filler of nanometer-class developed for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure v...展开 HTM-B Barium Sulphate Modified is a function filler of nanometer-class developed for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起
HTM-C Barium Sulphate Modified Hoten Chemical International Group HTM-C Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creati...展开 HTM-C Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起
HTN-NO Barium Sulfate Natural Hoten Chemical International Group HTN-NO Barium Sulfate Natural is a natural function filler that can be used in paint and improve concentration of coatings.
HTN-NP Barium Sulfate Natural Hoten Chemical International Group HTN-NP Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures.
HTN-NQ Barium Sulfate Natural Hoten Chemical International Group HTN-NQ Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures.
HTN-NR Barium Sulfate Natural Hoten Chemical International Group HTN-NR Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures.
HTN-NS Barium Sulfate Natural Hoten Chemical International Group HTN-NS Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures.
HTS-H Synthetic Barium Sulfate Hoten Chemical International Group HTS-H Synthetic Barium Sulfate is a chemically synthesized barium sulfate derived from the processing of barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow dist...展开 HTS-H Synthetic Barium Sulfate is a chemically synthesized barium sulfate derived from the processing of barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起
HTS-L Synthetic Barium Sulfate Hoten Chemical International Group HTS-L Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribut...展开 HTS-L Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起
HTS-M Synthetic Barium Sulfate Hoten Chemical International Group HTS-M Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribut...展开 HTS-M Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起
MTO-MP020 Shanghai HuZheng Nano Technology Co., Ltd. MTO-MP020 is a black colored solution containing 20% MoO3 solids, used in inks, paints and coatings for its UV protection properties. It also is capable of being used in water- or solvent-based applications requiring insulation from heat, due to its abil...展开 MTO-MP020 is a black colored solution containing 20% MoO3 solids, used in inks, paints and coatings for its UV protection properties. It also is capable of being used in water- or solvent-based applications requiring insulation from heat, due to its ability to reflect infrared light in the range of wavelengths from 800 - 1000 nm. 收起
MTO-P100 Shanghai HuZheng Nano Technology Co., Ltd. MTO-P100 is a black MoO3 powder with a particle size of 40 nm, used in inks, paints and coatings for its UV protection properties. It also is capable of being used in applications requiring insulation from heat, due to its ability to reflect infrared lig...展开 MTO-P100 is a black MoO3 powder with a particle size of 40 nm, used in inks, paints and coatings for its UV protection properties. It also is capable of being used in applications requiring insulation from heat, due to its ability to reflect infrared light in the range of wavelengths from 800 - 1000 nm. 收起
Speedblock 1130 Lambson Group Ltd. Speedblock 1130 is a liquid UV absorber from the hydroxyphenyl-benzotriazole family group which was developed for application in coatings; particularly used in industrial and automotive coatings. However, because of its wide UV absorption it also gives ex...展开 Speedblock 1130 is a liquid UV absorber from the hydroxyphenyl-benzotriazole family group which was developed for application in coatings; particularly used in industrial and automotive coatings. However, because of its wide UV absorption it also gives excellent protection to light sensitive substrates like plastics and wood. The product is miscible with all common solvents and is also easily incorporated in to water borne systems. 收起
Speedblock 326 Lambson Group Ltd. Speedblock 326 is a UV absorber of the hydroxyl phenyl benzotriazole class and can be used to impart light stability in organic materials and as an adhesive. A pale yellow powder, it contains a range of UV protection with an absorption band width from 220...展开 Speedblock 326 is a UV absorber of the hydroxyl phenyl benzotriazole class and can be used to impart light stability in organic materials and as an adhesive. A pale yellow powder, it contains a range of UV protection with an absorption band width from 220nm to 400nm 收起
Speedblock 327 Lambson Group Ltd. Speedblock 327 is a UV absorber of the hydroxyl phenyl benzotriazole class that has absorption bands in the 200-230nm & 300-360nm ranges. A pale yellow powder, this product can be used in adhesives and polymers.
Speedblock 328 Lambson Group Ltd. Speedblock 328 is a UV absorber of the hydroxyl phenyl benzotriazole class that can be used in adhesives and polymers. This pale yellow powder can be used alone or with additional additional additives including hindered light stabilisers antioxidants.
Speedblock AO2 Lambson Group Ltd. Speedblock AO2 is a sterically hindered phenolic anti-oxidant. It is an efficient and non-discolouring stabiliser for organic substrates including elastomers and adhesives. A white crystalline powder, it is non-polluting, non-toxic with head and water res...展开 Speedblock AO2 is a sterically hindered phenolic anti-oxidant. It is an efficient and non-discolouring stabiliser for organic substrates including elastomers and adhesives. A white crystalline powder, it is non-polluting, non-toxic with head and water resisting performance while being able to combine with other stabilisers. 收起
Speedblock UV-0 Lambson Group Ltd. Speedblock UV-0 is a benzophenone type UV absorber that protects by preferentially absorbing harmful ultraviolet radiation and dissipating it as thermal energy. This pale yellow powder is used in alkyd and epoxy coatings, rubber based adhesives and lacque...展开 Speedblock UV-0 is a benzophenone type UV absorber that protects by preferentially absorbing harmful ultraviolet radiation and dissipating it as thermal energy. This pale yellow powder is used in alkyd and epoxy coatings, rubber based adhesives and lacquers. 收起
Speedblock UV-6 Lambson Group Ltd. Speedblock UV-6 is a benzophenone type UV absorber that protects by preferentially absorbing harmful ultraviolet radiation and dissipating it as thermal energy. This pale yellow powder is compatible with a range of polymers while dispersing little odour a...展开 Speedblock UV-6 is a benzophenone type UV absorber that protects by preferentially absorbing harmful ultraviolet radiation and dissipating it as thermal energy. This pale yellow powder is compatible with a range of polymers while dispersing little odour and volatility during high-temperature processes. It can be used in alkyd and epoxy coatings, varnishes, rubber based adhesives and lacquers. 收起
Speedblock UV-9 Lambson Group Ltd. Speedblock UV9 is an efficient substituted benzophenone that is ideally suited for exterior coatings applications where excellent heat and light stability are desired. This pale yellow powder is used in exterior surface, food packaging, wood and metal coa...展开 Speedblock UV9 is an efficient substituted benzophenone that is ideally suited for exterior coatings applications where excellent heat and light stability are desired. This pale yellow powder is used in exterior surface, food packaging, wood and metal coatings. 收起
Speedblock UV92 Lambson Group Ltd. Speedblock UV-92 is an absorber and a blend of sterically hindered amines (HALS) that is well-suited for exterior coatings applications where excellent light stability is required. This pale yellow liquid enables UV protection in many polymers and is comp...展开 Speedblock UV-92 is an absorber and a blend of sterically hindered amines (HALS) that is well-suited for exterior coatings applications where excellent light stability is required. This pale yellow liquid enables UV protection in many polymers and is compatible with many forumulations working well with other UV absorbents. It is applied to exterior surface, industrial, automotive and UV cured coatings. 收起
Speedcure 2-ITX Lambson Group Ltd. Speedcure 2-ITX is a cream to pale yellow powder and a photoinitiator which, when used with tertiary amine synergists, induces a rapid photo-polymerisation of suitable resin formulations. This product can be applied to wood varnishes, printing inks as wel...展开 Speedcure 2-ITX is a cream to pale yellow powder and a photoinitiator which, when used with tertiary amine synergists, induces a rapid photo-polymerisation of suitable resin formulations. This product can be applied to wood varnishes, printing inks as well as decorative coatings for metal cans and food cartons. 收起
Speedcure 2959 Lambson Group Ltd. Speedcure 2959 is a reactive type I photoinitiator that induces photo-polymerisation of systems consisting of unsaturated monomers and pre-polymers when introduced to UV light. This white to off white powder can enhance compatibility in water-borne coatin...展开 Speedcure 2959 is a reactive type I photoinitiator that induces photo-polymerisation of systems consisting of unsaturated monomers and pre-polymers when introduced to UV light. This white to off white powder can enhance compatibility in water-borne coatings and formulations and can be reacted with suitable functionalised unsaturated resins. 收起
Speedcure 500 Lambson Group Ltd. Speedcure 500 is a eutectic liquid mixture of a type one and a type two photoinitiator. It is used to initiate the photo-polymerisation of chemically unsaturated pre-polymers, in combination with mono- and multifunctional monomers. This colourless to slig...展开 Speedcure 500 is a eutectic liquid mixture of a type one and a type two photoinitiator. It is used to initiate the photo-polymerisation of chemically unsaturated pre-polymers, in combination with mono- and multifunctional monomers. This colourless to slightly yellow liquid enables surface and depth cure as well as lower viscosity formulations for clear coatings, wood lacquers and printing inks. 收起
Speedcure 5040 Lambson Group Ltd. Speedcure 5040 is a benzophenone/thioxanthone free mixture of free radical photoinitiators developed in response to technical requirements in graphic arts, electronics and industrial coatings industries. This transparent yellow to red/brown liquid is used...展开 Speedcure 5040 is a benzophenone/thioxanthone free mixture of free radical photoinitiators developed in response to technical requirements in graphic arts, electronics and industrial coatings industries. This transparent yellow to red/brown liquid is used in applications where low odor and high performance are required or when curing is tougher in pigmented systems for improved wetting. It is applied to UV Flexo, offset and screen inks. 收起
Speedcure 5050 Lambson Group Ltd. Speedcure 5050 is a low migration formulated photoinitiator product that has been designed for food packaging related applications of UV overprint varnishes and lacquers where low migration as a main characteristic is required, but is applicable to low mi...展开 Speedcure 5050 is a low migration formulated photoinitiator product that has been designed for food packaging related applications of UV overprint varnishes and lacquers where low migration as a main characteristic is required, but is applicable to low migration UV clear systems where non-yellowing and low odour are necessary. This transparent pale yellow liquid contains high reactivity, efficient surface curing and good solubility in resin systems. 收起
Speedcure 5070 Lambson Group Ltd. Speedcure 5070 is a low migration formulated photoinitiator created for food packaging related applications of UV flexographic, offset and screen printing inks where low migration as a main characteristic is mandatory, but can be used in applications wher...展开 Speedcure 5070 is a low migration formulated photoinitiator created for food packaging related applications of UV flexographic, offset and screen printing inks where low migration as a main characteristic is mandatory, but can be used in applications where low odour and migration are necessary in troublesome cure colours like black. This transparent yellow to amber liquid can be applied to UV Flexo, offset, screen and UV printing inks. 收起
Speedcure 7005 Lambson Group Ltd. Speedcure 7005 is a polymeric photoinitiator suitable for use when benzophenone free formulations are necessary. This will induce rapid photo-polymerisation when formulated with a suitable polymeric tertiary amine synergist, such as Speedcure 7040. It com...展开 Speedcure 7005 is a polymeric photoinitiator suitable for use when benzophenone free formulations are necessary. This will induce rapid photo-polymerisation when formulated with a suitable polymeric tertiary amine synergist, such as Speedcure 7040. It comes as an off white to pale yellow liquid with low migration, odour and toxicity used in printing inks, wood lacquers, over print varnishes, putties and fillers for particle and chip boards, adhesives and solder masks. 收起
Speedcure 7010 Lambson Group Ltd. Speedcure 7010 is a highly efficient polymeric thioxanthone type photoinitiator which when used with a polymeric tertiary amine synergist such as Speedcure 7040 or an acrylated amine, induces the rapid photo-polymerisation of suitable resin formulations. ...展开 Speedcure 7010 is a highly efficient polymeric thioxanthone type photoinitiator which when used with a polymeric tertiary amine synergist such as Speedcure 7040 or an acrylated amine, induces the rapid photo-polymerisation of suitable resin formulations. This cream to pale yellow free flowing powder inhibits low migration and yellowing in addition to adding depth cure in pigmented in thick films. It can be applied to printing inks, wood coatings and decorative coatings for metal cans and food cartons. 收起
Speedcure 7010-L Lambson Group Ltd. Speedcure 7010L is a polymeric thioxanthone type photoinitiator which when used with a polymeric tertiary amine synergist such as Speedcure 7040 or an acrylated amine, induces the rapid photo-polymerisation of suitable resin formulations. This pale yellow...展开 Speedcure 7010L is a polymeric thioxanthone type photoinitiator which when used with a polymeric tertiary amine synergist such as Speedcure 7040 or an acrylated amine, induces the rapid photo-polymerisation of suitable resin formulations. This pale yellow liquid inhibits low migration and yellowing in addition to providing depth cure in pigmented and thick films. It is applied to printing inks, wood coatings and decorative coatings for metal cans and food cartons. 收起
Speedcure 7040 Lambson Group Ltd. Speedcure 7040 is an amine synergist which, when used with Type II polymeric photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This pale amber liquid contains low migration, toxicity and odour in a...展开 Speedcure 7040 is an amine synergist which, when used with Type II polymeric photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This pale amber liquid contains low migration, toxicity and odour in addition to solubility in most common organic solvents and UV curable monomers. It can be applied to wood varnishes, printing inks, over printing varnishes, decorative coatings for metal cans and food cartons, adhesives, sealants and metal primers. 收起
Speedcure 73 Lambson Group Ltd. Speedcure 73 is a Type I photoinitiator. Radicals are formed by an α cleavage mechanism and as such does not require an amine synergist to promote radical production. This clear colourless to yellowish liquid produces hard coatings with high gloss and pro...展开 Speedcure 73 is a Type I photoinitiator. Radicals are formed by an α cleavage mechanism and as such does not require an amine synergist to promote radical production. This clear colourless to yellowish liquid produces hard coatings with high gloss and provides good surface cure with low yellowing. It can be applied to clear coatings, overprint varnishes, wood laquers, silicone based coatings and printing inks. 收起
Speedcure 84 Lambson Group Ltd. Speedcure 84 is a Type I photoinitiator. Radicals are formed by an α cleavage mechanism and as such does not require an amine synergist to promote radical production. This white crystalline powder produces hard coatings with high gloss and provides good s...展开 Speedcure 84 is a Type I photoinitiator. Radicals are formed by an α cleavage mechanism and as such does not require an amine synergist to promote radical production. This white crystalline powder produces hard coatings with high gloss and provides good surface core with low yellowing. It is applied to clear coatings, overprint varnishes, wood lacquers, adhesives, silicone based coatings and printing inks. 收起
Speedcure 902D Lambson Group Ltd. Speedcure 902D is a benzene free cationic photoinitiator and a mixture of triarylsulphonium hexafluorophosphate salts in a glycidyl ether reactive diluent. This pale yellow transparent liquid enables good adhesion to metal substrates in addition to curing...展开 Speedcure 902D is a benzene free cationic photoinitiator and a mixture of triarylsulphonium hexafluorophosphate salts in a glycidyl ether reactive diluent. This pale yellow transparent liquid enables good adhesion to metal substrates in addition to curing. It is applied to clear coatings, thin films, cycloaliphatic epoxy resins, vinyl ethers and other cationically cured materials. 收起
Speedcure 937 Lambson Group Ltd. Speedcure 937 is an iodonium hexafluoroantimonate salt dissolved in a glycidyl ether reactive diluent. This product was designed for use with epoxy silicone polymers and is useful in UV cure release coating applications. An amber liquid, it has good solub...展开 Speedcure 937 is an iodonium hexafluoroantimonate salt dissolved in a glycidyl ether reactive diluent. This product was designed for use with epoxy silicone polymers and is useful in UV cure release coating applications. An amber liquid, it has good solubility in many resins and can be applied to expoxy silicone release systems as well as cationically cured materials. 收起
Speedcure 938 Lambson Group Ltd. Speedcure 938 is an iodonium cationic photoinitiator, designed for non-silicone applications such as the cationic UV curing of inks to speed up the rate of curing. This pale yellow/cream crystalline powder enables good adhesion to metal substrates and pre...展开 Speedcure 938 is an iodonium cationic photoinitiator, designed for non-silicone applications such as the cationic UV curing of inks to speed up the rate of curing. This pale yellow/cream crystalline powder enables good adhesion to metal substrates and presents low yellowing in clear coatings and thin films in addition to its use to cure cycloaliphatic epoxy resins, vinyl ethers, glycidyl ethers, oxetane, epoxidised olefins and other cationically cured materials. 收起
Speedcure 97 Lambson Group Ltd. Speedcure 97 is a Type I photoinitiator used to initiate UV photo-polymerisation typically with unsaturated monomers and polymers such as acrylates/methacrylates or vinyl polymers. This white powder increases cure speed, provide surface core and good reac...展开 Speedcure 97 is a Type I photoinitiator used to initiate UV photo-polymerisation typically with unsaturated monomers and polymers such as acrylates/methacrylates or vinyl polymers. This white powder increases cure speed, provide surface core and good reactivity. It is applied to clear coatings, overprint varnishes, wood lacquers, adhesives, silicone based coatings and printing inks. 收起
Speedcure 976 Lambson Group Ltd. Speedcure 976 is a cationic photoinitiator and a mixture of triarylsulphonium hexafluoroantimonate salts in propylene carbonate. This yellow liquid enables a fast cure in inks and overprint varnishes. It is also more geared for thicker coatings and films.
Speedcure 976D Lambson Group Ltd. Speedcure 976D is a cationic photoinitiator and a mixture of triarylsulphonium hexafluoroantimonate salts in a reactive solvent. This pale yellow transparent liquid enables a fast cure in inks and overprint varnishes and is suitable for clear and thicker ...展开 Speedcure 976D is a cationic photoinitiator and a mixture of triarylsulphonium hexafluoroantimonate salts in a reactive solvent. This pale yellow transparent liquid enables a fast cure in inks and overprint varnishes and is suitable for clear and thicker coatings greater than 25μm. 收起
Speedcure 992 Lambson Group Ltd. Speedcure 992 is a cationic photoinitiator and a mixture of triarylsulphonium hexafluorophosphate salts in propylene carbonate. This clear, yellow to amber liquid enables good adhesion to metal substrates and has low shrinkage in addition to curing. It is...展开 Speedcure 992 is a cationic photoinitiator and a mixture of triarylsulphonium hexafluorophosphate salts in propylene carbonate. This clear, yellow to amber liquid enables good adhesion to metal substrates and has low shrinkage in addition to curing. It is applied to clear coatings, thin films, cycloaliphatic epoxy resins such as UviCure S105 and UviCure S128, vinyl ethers and other cationically cured materials. 收起
Speedcure BCIM Lambson Group Ltd. Speedcure BCIM is a photoinitiator used in radiation curing of photo-resists and printing inks. This yellow powder has a long wavelength absorption and fast cure used in photo-imaging, colour forming processes and production of resists.
Speedcure BDMB Lambson Group Ltd. Speedcure BDMB is a reactive Type I photoinitiator that will induce rapid photo-polymerisation when exposed to UV light. This fine pale yellow powder can be used as a through cure in dark colour pigmented systems and will cure complex systems with other c...展开 Speedcure BDMB is a reactive Type I photoinitiator that will induce rapid photo-polymerisation when exposed to UV light. This fine pale yellow powder can be used as a through cure in dark colour pigmented systems and will cure complex systems with other co-initiators. It is applied to UV curable screen printing inks, varnishes for paper metal and plastics, photresists and solder maks, UV curable off-set printing inks, printing plates and adhesives. 收起
Speedcure BEDB Lambson Group Ltd. Speedcure BEDB is a liquid amine synergist which, when used with Type II photoinitiators, generates free radicals capable of initiating the rapid photo-polymerisation of suitable resin formulations. Thioxanthone photoinitiators are highly soluble in Speed...展开 Speedcure BEDB is a liquid amine synergist which, when used with Type II photoinitiators, generates free radicals capable of initiating the rapid photo-polymerisation of suitable resin formulations. Thioxanthone photoinitiators are highly soluble in Speedcure BEDB, affording a single liquid additive. This clear, pale yellow liquid has good soluble properties, low toxicity and low odor. It is used in wood varnishes, printing inks, over print varnishes, decorative coatings for metal cans and food cartons, adhesives, sealants and metal primers. 收起
Speedcure BEM Lambson Group Ltd. Speedcure BEM is a liquid, non-yellowing photoinitiator which, with tertiary amine synergists, initiates rapid polymerisation of suitable resin formulations. This clear light yellow oily liquid is a eutectic mixture of benzophenone and methylbenzophenones...展开 Speedcure BEM is a liquid, non-yellowing photoinitiator which, with tertiary amine synergists, initiates rapid polymerisation of suitable resin formulations. This clear light yellow oily liquid is a eutectic mixture of benzophenone and methylbenzophenones that helps reduce viscosity of formulations, contains solubility and compatibility with unsaturated monomers and does not contribute to photo yellowing. It is applied to printing inks, clear overprint varnishes, wood varnishes, decorative coatings for metal cans and food cartons as well as adhesives. 收起
Speedcure BKL Lambson Group Ltd. Speedcure BKL is a Type I photoinitiator that forms radicals rapidly by an α cleavage mechanism that initiates the photo-polymerisation of suitable resin formulations. This white crystalline powder is compatible with most pre-polymers, resins and monomers...展开 Speedcure BKL is a Type I photoinitiator that forms radicals rapidly by an α cleavage mechanism that initiates the photo-polymerisation of suitable resin formulations. This white crystalline powder is compatible with most pre-polymers, resins and monomers used in UV curing industry and is a general purpose photoinitiator for inks and coatings. It can be applied to printing inks, over print varnishes, wood lacquers, adhesives as well as putties and fillers for particle and chip boards. 收起
Speedcure BMS Lambson Group Ltd. Speedcure BMS is a Type II photoinitiator that can induce the rapid photo-polymerisation when formulated with a suitable tertiary amine synergist. This white powder, when used in combination with other substances, can initiate polymerisation of pigmented ...展开 Speedcure BMS is a Type II photoinitiator that can induce the rapid photo-polymerisation when formulated with a suitable tertiary amine synergist. This white powder, when used in combination with other substances, can initiate polymerisation of pigmented systems and can form a single liquid additive with a liquid amine synergist comprising both initiator and synergist. It also has low yellowing and can be used in printing inks, clear over print varnishes and adhesives as well as decorative coatings for metal cans and food cartons. 收起
Speedcure BP Lambson Group Ltd. Speedcure BP is a Type II photoinitiator that, when used with tertiary amine synergists, initiates the rapid photo-polymerisation of suitable resin formulations. These white flakes are commonly used to achieve a fast surface cure and help oxygen inhibitio...展开 Speedcure BP is a Type II photoinitiator that, when used with tertiary amine synergists, initiates the rapid photo-polymerisation of suitable resin formulations. These white flakes are commonly used to achieve a fast surface cure and help oxygen inhibition in printing inks, clear over print varnishes, wood varnishes, decorative coatings for metal cans and cartons as well as adhesives. 收起
Speedcure CPTX Lambson Group Ltd. Speedcure CPTX is a thioxanthone photoinitiator which, when used with tertiary amine synergists, induces the rapid photo-polymerisation of suitable resin formulations and can also be used with Speedcure 73 to sensitise iodonium salts in cationic cure. Thi...展开 Speedcure CPTX is a thioxanthone photoinitiator which, when used with tertiary amine synergists, induces the rapid photo-polymerisation of suitable resin formulations and can also be used with Speedcure 73 to sensitise iodonium salts in cationic cure. This yellow crystalline powder contains fast cure speed, excellent depth cure and high final degree of cure suitable for pigmented and thick films. It can be applied to printing inks, wood varnishes, adhesives as well as decorative coatings for metal cans and food cartons. 收起
Speedcure DETX Lambson Group Ltd. Speedcure DETX is a photoinitiator which, when used with tertiary amine synergists, induces the rapid photo-polymerisation of suitable resin formulations. This yellow powder can provide surface cure of various films, improve ink quality and reduce prepara...展开 Speedcure DETX is a photoinitiator which, when used with tertiary amine synergists, induces the rapid photo-polymerisation of suitable resin formulations. This yellow powder can provide surface cure of various films, improve ink quality and reduce preparation time in printing inks, wood varnishes, decorative coatings for metal cans and food cartons as well as adhesives. 收起
Speedcure DMB Lambson Group Ltd. Speedcure DMB is an amine synergist that, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This pale yellow liquid contains low volatiliy and freezing point in addition to l...展开 Speedcure DMB is an amine synergist that, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This pale yellow liquid contains low volatiliy and freezing point in addition to little photo-yellowing. It is applied to printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives and metal primers. 收起
Speedcure EAQ Lambson Group Ltd. Speedcure EAQ is a Type II photoinitiator that absorbs in the UV spectrum at 330 nm. In the presence of a hydrogen donor, highly reactive donor radicals are formed, which are capable of initiating the polymerisation process efficiently. This pale yellow ...展开 Speedcure EAQ is a Type II photoinitiator that absorbs in the UV spectrum at 330 nm. In the presence of a hydrogen donor, highly reactive donor radicals are formed, which are capable of initiating the polymerisation process efficiently. This pale yellow powder cures without an amine-type hydrogen donor and has its effectiveness raised by the presence of oxygen. It is used in curing resists and printing inks that are acid treated post-cure. 收起
Speedcure EDB Lambson Group Ltd. Speedcure EDB is an amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This off white to white powder is used in wood varnishes, printing inks, over pri...展开 Speedcure EDB is an amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This off white to white powder is used in wood varnishes, printing inks, over printing varnishes, decorative coatings for metal cans and food cartons, adhesives, sealants and metal primers. 收起
Speedcure EHA Lambson Group Ltd. Speedcure EHA is an amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate the photo-polymerisation of suitable resin formulations. This pale yellow liquid contains a low freezing point and volatility in addit...展开 Speedcure EHA is an amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate the photo-polymerisation of suitable resin formulations. This pale yellow liquid contains a low freezing point and volatility in addition to acting as a useful solvent in UV formulations. It can be applied to wood varnishes, printing inks, adhesives and decorative coatings for metal cans and food cartons. 收起
Speedcure EMK Lambson Group Ltd. Speedcure EMK is an efficient UV photoinitiator or hydrogen donor absorbing at 377 nm and used primarily in the electronics sector. This pale yellow solid enables a fast cure in cure resists and printing inks.
Speedcure EPD Lambson Group Ltd. Speedcure EPD is a highly efficient amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This white to off white powder has low toxicity and odour in addi...展开 Speedcure EPD is a highly efficient amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This white to off white powder has low toxicity and odour in addition to solubility in most common organic solvents and UV curable monomers. It is applied to wood varnishes, printing inks, decorative coatings for metal cans and food cartons, adhesives, sealants and metal primers. 收起
Speedcure ITX Lambson Group Ltd. Speedcure ITX is a pale yellow powder and a photoinitiator which, when used with tertiary amine synergists, induces a rapid photo-polymerisation of suitable resin formulations. This product can be applied to wood varnishes, printing inks as well as decora...展开 Speedcure ITX is a pale yellow powder and a photoinitiator which, when used with tertiary amine synergists, induces a rapid photo-polymerisation of suitable resin formulations. This product can be applied to wood varnishes, printing inks as well as decorative coatings for metal cans and food cartons. 收起
Speedcure MBB Lambson Group Ltd. Speedcure MBB is a near odourless photoinitiator which, when used with tertiary amine synergists, initiates the rapid polymerisation of suitable resin formulations. This white to off white crystalline powder does not effect photo yellowing, promotes rapid...展开 Speedcure MBB is a near odourless photoinitiator which, when used with tertiary amine synergists, initiates the rapid polymerisation of suitable resin formulations. This white to off white crystalline powder does not effect photo yellowing, promotes rapid surface cure and ideal for food packing printing inks due to its minimal odor. It can be used in printing inks, decorative coatings for metal cans and food cartons as well as clear over print and wood varnishes. 收起
Speedcure MBF Lambson Group Ltd. Speedcure MBF is a photoinitiator that is commonly used for overprint varnish and wood coating applications where excellent surface cure response and non-yellowing are desired. This clear, pale yellow liquid is recommended for systems requiring low odor a...展开 Speedcure MBF is a photoinitiator that is commonly used for overprint varnish and wood coating applications where excellent surface cure response and non-yellowing are desired. This clear, pale yellow liquid is recommended for systems requiring low odor and enables a surface cure as well as increased cross-link density. In addition to wood coating and overprint varnish, it can be applied to inks, industrial coatings and adhesives. 收起
Speedcure MBP Lambson Group Ltd. Speedcure MBP is a cost effective photoinitiator used when benzophenone free formulations are required. It is a free-flowing, easy-to-handle, low-dusting, white crystalline small-flaked material that contains the same curing efficiency and performance cha...展开 Speedcure MBP is a cost effective photoinitiator used when benzophenone free formulations are required. It is a free-flowing, easy-to-handle, low-dusting, white crystalline small-flaked material that contains the same curing efficiency and performance characteristics as benzophenone. It can be applied to printing inks, wood lacquers, over print varnishes, putties and fillers for particle and chips boards, adhesives and solder masks. 收起
Speedcure PBZ Lambson Group Ltd. Speedcure PBZ is a photoinitiator, normally used with a tertiary amine synergist in the formulation of UV curable coatings. This off white powder absorbs at longer wavelengths than benzophenone which enables a faster cure. It can be applied to printing in...展开 Speedcure PBZ is a photoinitiator, normally used with a tertiary amine synergist in the formulation of UV curable coatings. This off white powder absorbs at longer wavelengths than benzophenone which enables a faster cure. It can be applied to printing inks, wood varnishes, over print varnishes, decorative coatings for metal cans and food cartons, adhesives and metal primers. 收起
Speedcure PDO Lambson Group Ltd. Speedcure PDO is a reactive Type I photoinitiator that absorbs at 259 nm. The excited triplet state undergoes fast fragmentation of the N-O bond to form an oxime radical, which is the prime initiator of the polymerisation. This white to pale cream powder ...展开 Speedcure PDO is a reactive Type I photoinitiator that absorbs at 259 nm. The excited triplet state undergoes fast fragmentation of the N-O bond to form an oxime radical, which is the prime initiator of the polymerisation. This white to pale cream powder can be used for curing additives and unsaturated polyesters while exhibiting low yellowing. It is recommended for use in clear coating, adhesives and composites. 收起
Speedcure TPO Lambson Group Ltd. Speedcure TPO is a Type I homolytic photoinitiator, which absorbs UV light at longer wavelengths, making it suitable for curing pigmented formulations. This pale yellow crystalline powder undergoes "photo-bleaching" to make it effective for curing thick f...展开 Speedcure TPO is a Type I homolytic photoinitiator, which absorbs UV light at longer wavelengths, making it suitable for curing pigmented formulations. This pale yellow crystalline powder undergoes "photo-bleaching" to make it effective for curing thick films. It is applied to wood coatings and filler, glass fibre reinforced polyester laminates, manufacture of printing plates and pigmented printing inks. 收起
Speedcure TPO-L Lambson Group Ltd. Speedcure TPO-L is a liquid Type I photoinitiator that absorbs at 380 nm. The photo-fragmentation produces benzoyl and phosphinyl radicals that can initiate the polymerisation of formulations containing acrylates, unsaturated polyesters and styrene. This ...展开 Speedcure TPO-L is a liquid Type I photoinitiator that absorbs at 380 nm. The photo-fragmentation produces benzoyl and phosphinyl radicals that can initiate the polymerisation of formulations containing acrylates, unsaturated polyesters and styrene. This yellow liquid cures coating containing titanium dioxide, is a safer cure for opaque systems and gives a good through-cure. It is applied to UV offset and flexo inks, white pigmented UV lacquers, UV screen inks, UV overprint varnishes and printing plates. 收起
Speedcure XFc Lambson Group Ltd. Speedcure XFc is a liquid photoinitiator developed for use in clear coatings such as UV overprint varnishes and lacquers where fast curing and low yellowing are a pre-requisite. This transparent pale yellow liquid also has low viscosity, high reactivity a...展开 Speedcure XFc is a liquid photoinitiator developed for use in clear coatings such as UV overprint varnishes and lacquers where fast curing and low yellowing are a pre-requisite. This transparent pale yellow liquid also has low viscosity, high reactivity and good solubility in many resins while exhibiting little odour. 收起
Speedcure XFd Lambson Group Ltd. Speedcure XFd is a liquid photoinitiator developed to be highly reactive in dark pigmented systems. The product induces rapid photo-polymerisation of suitable resin formulations containing acrylates, unsaturated polyesters and styrene. A transparent pale ...展开 Speedcure XFd is a liquid photoinitiator developed to be highly reactive in dark pigmented systems. The product induces rapid photo-polymerisation of suitable resin formulations containing acrylates, unsaturated polyesters and styrene. A transparent pale yellow liquid, it exhibits low viscosity, high reactivity, surface and through curing in addition to being soluble in resin systems. 收起