| BLR-8086 | Elementis 海名斯特殊化学 | BLR-8086 为一封闭型脂肪族聚异氰酯，适用于单组份聚胺酯涂料。 | Request Sample |
| Hypomer AC-7401 | Elementis 海名斯特殊化学 | 施工性佳, 塑料附着性佳, 施工性佳 | Request Sample |
| Hypomer AC-7402 | Elementis 海名斯特殊化学 | 干燥速度快, 耐水性佳, 耐热性佳, 塑料与金属附着性佳 | Request Sample |
| Hypomer AC-7450 | Elementis 海名斯特殊化学 | 干燥速度快、高光泽、高硬度、耐醇性佳 | Request Sample |
| Hypomer FS-1560 | Elementis 海名斯特殊化学 | 塑料附着性佳、干燥速度快 | Request Sample |
| Hypomer FS-2050 | Elementis 海名斯特殊化学 | 干燥速度快、耐候性佳、铝粉排列性佳、可用于自干涂料 | Request Sample |
| Hypomer FS-2052 | Elementis 海名斯特殊化学 | 干燥速度快、塑料附着性佳、耐候性佳、对乙丁纤维素兼容性佳、可用于自干涂料 | Request Sample |
| Hypomer FS-2060A | Elementis 海名斯特殊化学 | 塑料附着性佳、对各类金属附着性佳、耐候性佳 | Request Sample |
| Hypomer FS-2060AF | Elementis 海名斯特殊化学 | 塑料附着性佳、对各类金属附着性佳、耐候性佳 | Request Sample |
| Hypomer FS-2060B | Elementis 海名斯特殊化学 | 干燥速度快、塑料附着性佳、颜料润湿性佳 | Request Sample |
| Hypomer FS-2061 | Elementis 海名斯特殊化学 | 干燥速度快、塑料附着性佳、耐酒精性佳、铝粉排列性佳、对乙丁纤维素、硝基漆兼容性佳 | Request Sample |
| Hypomer FS-2451 | Elementis 海名斯特殊化学 | 干燥速度快、硬度高、塑料附着性佳、耐酒精性佳、铝粉排列性佳、与醋丁纤维素及硝化棉兼容性佳 | Request Sample |
| Hypomer FS-2451F | Elementis 海名斯特殊化学 | 快干、高硬度、耐溶剂性佳、塑料附着性佳、铝粉排列佳、环保、无芳香族溶剂 | Request Sample |
| Hypomer FS-2460A | Elementis 海名斯特殊化学 | 干燥速度快、耐候性佳、塑料附着性佳、颜料润湿性佳 | Request Sample |
| Hypomer FS-2460AF | Elementis 海名斯特殊化学 | 干燥速度快、耐候性佳、塑料附着性佳、颜料润湿性佳、环保、无芳香族溶剂 | Request Sample |
| Hypomer FS-2820 | Elementis 海名斯特殊化学 | 颜料润湿性佳、耐候性佳 | Request Sample |
| Hypomer FS-2820F | Elementis 海名斯特殊化学 | 颜料润湿性佳、耐候性佳 | Request Sample |
| Hypomer FS-2860A | Elementis 海名斯特殊化学 | 高光泽、高硬度、固化速度快 | Request Sample |
| Hypomer FS-2860AF | Elementis 海名斯特殊化学 | 高光泽、高硬度、固化速度快、环保，无芳香族溶剂 | Request Sample |
| Hypomer FS-2970A | Elementis 海名斯特殊化学 | 高丰满度、光泽与鲜映性、流平性佳、颜料润湿性佳 | Request Sample |
| Hypomer FS-2970B | Elementis 海名斯特殊化学 | 高丰满度、光泽与鲜映性、流平性佳、颜料润湿性佳 | Request Sample |
| Hypomer FS-2970F | Elementis 海名斯特殊化学 | 高丰满度、光泽与鲜映性、流平性佳、颜料润湿性佳 | Request Sample |
| Hypomer FS-3060 | Elementis 海名斯特殊化学 | 低粘度、高丰满度、光泽与鲜映性、固化速度快、颜料润湿性佳 | Request Sample |
| Hypomer FS-3070 | Elementis 海名斯特殊化学 | 高丰满度、光泽与鲜映性、颜料润湿性佳 | Request Sample |
| Hypomer FS-3071 | Elementis 海名斯特殊化学 | 高丰满度、光泽与鲜映性、颜料润湿性佳 | Request Sample |
| Hypomer FS-3270 | Elementis 海名斯特殊化学 | 高丰满度、光泽与鲜映性、干燥速度快、耐溶剂性佳 | Request Sample |
| Hypomer FS-3270F | Elementis 海名斯特殊化学 | 高丰满度、光泽与鲜映性、干燥速度快、耐溶剂性佳 | Request Sample |
| Hypomer FS-3566F | Elementis 海名斯特殊化学 | 高丰满度、光泽与鲜映性、固化速度快，施工时限长、低 VOC，环保，无芳香族溶剂 | Request Sample |
| Hypomer FS-4070F | Elementis 海名斯特殊化学 | 高丰满度、光泽与鲜映性、流平性佳、耐候性佳 | Request Sample |
| Hypomer FS-4075AF | Elementis 海名斯特殊化学 | 高固低粘、流平性能、高丰满度 | Request Sample |
| Hypomer FS-4080F | Elementis 海名斯特殊化学 | 高固低粘、流平性佳、高丰满度 | Request Sample |
| Hypomer FS-4365A | Elementis 海名斯特殊化学 | 高丰满度、光泽与鲜映性、流平性佳、耐冲击性佳 | Request Sample |
| Hypomer FS-4365AF | Elementis 海名斯特殊化学 | 高丰满度、光泽及鲜映性、流平性佳、耐冲击性佳 | Request Sample |
| Hypomer FS-4470 | Elementis 海名斯特殊化学 | 高固成份、低粘度、高光泽与丰满度、流平性佳 | Request Sample |
| Hypomer FS-4660F | Elementis 海名斯特殊化学 | 高光泽与鲜映性、流平性佳、耐溶剂性佳、环保、无芳香族溶剂 | Request Sample |
| Hypomer FS-4660P | Elementis 海名斯特殊化学 | 高光泽与鲜映性、流平性佳、耐溶剂性佳 | Request Sample |
| Hypomer FX-2050 | Elementis 海名斯特殊化学 | 干燥速度快, 耐候性佳, 铝粉排列性佳, 可用于自干涂料 | Request Sample |
| Hypomer FX-2052 | Elementis 海名斯特殊化学 | 干燥速度快, 塑料附着性佳, 耐候性佳, 对乙丁纤维素兼容性佳, 可用于自干涂料 | Request Sample |
| Hypomer FX-2060A | Elementis 海名斯特殊化学 | 塑料附着性佳, 对各类金属附着性佳, 耐候性佳 | Request Sample |
| Hypomer FX-2060AF | Elementis 海名斯特殊化学 | 塑料附着性佳, 对各类金属附着性佳, 耐候性佳 | Request Sample |
| Hypomer FX-2060D | Elementis 海名斯特殊化学 | 干燥速度快, 高硬度, 耐溶剂性佳 | Request Sample |
| Hypomer FX-2451F | Elementis 海名斯特殊化学 | 干燥速度快、硬度高, 塑料密着性佳, 耐酒精性佳, 银粉排列性佳, 与乙丁纤维素及硝化棉兼容性佳, 更环保的溶剂组成 | Request Sample |
| Hypomer FX-2460AF | Elementis 海名斯特殊化学 | 干燥速度快, 塑料密着性佳, 耐候性佳, 颜料润湿性佳, 更环保的溶剂组成 | Request Sample |
| Hypomer FX-2820 | Elementis 海名斯特殊化学 | 颜料润湿性佳, 耐候性佳 | Request Sample |
| Hypomer FX-2820F | Elementis 海名斯特殊化学 | 颜料润湿性佳, 耐候性佳, 更环保的溶剂组成 | Request Sample |
| Hypomer FX-2860A | Elementis 海名斯特殊化学 | 高光泽, 高硬度, 硬化速度快 | Request Sample |
| Hypomer FX-2970A | Elementis 海名斯特殊化学 | 高丰满度、光泽与鲜映性, 平坦性佳, 颜料润湿性佳 | Request Sample |
| Hypomer FX-3060 | Elementis 海名斯特殊化学 | 低粘度, 高丰满度、光泽与鲜映性, 硬化速度快, 颜料润湿性佳 | Request Sample |
| Hypomer FX-3270 | Elementis 海名斯特殊化学 | 高丰满度、光泽与鲜映性, 干燥速度快, 耐溶剂性佳 | Request Sample |
| Hypomer FX-4365 | Elementis 海名斯特殊化学 | 高丰满度、光泽与鲜映性, 平坦性佳, 耐冲击性佳 | Request Sample |
| Hypomer FX-4660 | Elementis 海名斯特殊化学 | 高光泽、鲜映性, 平坦性佳, 耐溶剂性佳 | Request Sample |
| Hypomer MT-2350 | Elementis 海名斯特殊化学 | 消旋旋旋旋旋光性佳、耐划伤性佳、操作性佳、防沉降性佳、耐候性佳 | Request Sample |
| Hypomer MT-2550K | Elementis 海名斯特殊化学 | Hypomer MT-2550K 是一种羟基丙烯酸树脂，与含有二氧化硅消光剂的传统型二液型聚氨酯涂料相比，不仅具有优异的消光效果，同时有更好的清晰和透明度。 Hypomer MT-2550K是基于特殊化学反应程序，反应过程中所产生的交联颗粒能提供消光效果，并且创造出优于二氧化硅类消光漆的其它特性。 | Request Sample |
| Hypomer PE-8043F | Elementis 海名斯特殊化学 | 具有优异的耐冲击性、加工性, 优异的低温弹性, 颜料润湿性佳 | Request Sample |
| Hypomer UA-M6 | Elementis 海名斯特殊化学 | Hypomer UA-M6 具有丙烯酸丙烯酸酯结构, 提供UV涂料良好的附着性能。 | Request Sample |
| Hypomer UR-61 | Elementis 海名斯特殊化学 | Hypomer UR-61 为高官能度紫外光树脂，提供涂料硬度与耐磨性能。 | Request Sample |
| NANOCRYL® C 130 | Evonik Operations GmbH, BL Coating Additives | NANOCRYL® C130是一种透明至微黄色液体，50%重量比，于环三羟甲基丙烷缩甲醛丙烯酸酯中的二氧化硅纳米颗粒。它可用于溶剂型和非溶剂型辐射固化配方中。它具有良好的柔韧性，可用于套印清漆和塑料面漆。该产品可增强耐划伤和耐磨性，而不减少透明度。它具有对铝/玻璃极好的附着力，降低固化收缩率和阻隔作用。它也对塑料有附着力，对填充剂配方有抗沉降效果和改进的污垢脱落性能 | Request Sample |
| NANOCRYL® C 140 | Evonik Operations GmbH, BL Coating Additives | NANOCRYL® C140是一种透明至微黄色液体，二氧化硅纳米颗粒50%重量比，混于己二醇二丙烯酸酯中。它具有良好的抗紫外线，高柔韧性，可用于溶剂型和无溶剂型辐射固化配方。它也适用于套印清漆和塑料面漆。本品具有增强的耐划伤和耐磨损性，不会降低透明度。它对铝/玻璃具有良好的附着力，可降低固化收缩率，以及具有阻隔效果。它还改善了污垢脱落性。 | Request Sample |
| NANOCRYL® C 150 | Evonik Operations GmbH, BL Coating Additives | NANOCRYL®C 150是一种透明至微黄色液体，二氧化硅纳米颗粒50%重量比，混于三羟甲基丙烷（TMPTA）中。它可用于溶剂型和无溶剂型辐射固化配方。它具有高表面硬度和高交联密度，可用于套印清漆和塑料面漆。本品具有增强的耐划伤和耐磨损性，不会降低透明度。它对铝/玻璃具有良好的附着力，可降低固化收缩率，以及具有阻隔效果。它还改善了污垢脱落性和对塑料的附着力。 | Request Sample |
| PLUSTALC H15 | Elementis 海名斯特殊化学 | PLUSTALC H15 is a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. PLUSTALC grades have a low iron content. PLUSTALC is suitable for such applications where a higher brightness is required. | Request Sample |
| SILIKOFTAL® HTF MPA/MBA | Evonik Operations GmbH, BL Coating Additives | SILIKOFTAL® HTF MPA/MBA is a methoxy-functional silicone polyester resin. It shows high flexibility and low thermoplasticity. The product can be used in compliance with FDA 175.300 and BfR XV. | Request Sample |
| SILIKOFTAL® HTL | Evonik Operations GmbH, BL Coating Additives | SILIKOFTAL® HTL is a methoxy-functional silicone polyester resin. | Request Sample |
| SILIKOFTAL® HTL 1 | Evonik Operations GmbH, BL Coating Additives | SILIKOFTAL® HTL 1 is a methoxy-functional silicone polyester resin. It is a cost-efficient resin with excellent adhesion to aluminum, steel, and stainless steel. The product can be used in compliance with FDA 175.300 and BfR XV. | Request Sample |
| SILIKOFTAL® HTL 3/MPA | Evonik Operations GmbH, BL Coating Additives | SILIKOFTAL® HTL 3/MPA is a methoxy-functional silicone polyester resin. It shows an extraordinary yellowing resistance up to 250°C and a very good boiling water resistance. The product can be used in compliance with FDA 175.300 and BfR XV. | Request Sample |
| SILIKOFTAL® HTT | Evonik Operations GmbH, BL Coating Additives | 用于生产耐热装饰涂料的溶剂型主体树脂。 | Request Sample |
| SILIKOFTAL® NON-STICK 60 | Evonik Operations GmbH, BL Coating Additives | SILIKOFTAL® NON-STICK 60 is an ethoxy-functional silicone polyester resin for release coatings. The product can be used in compliance with FDA 175.300 and BfR XV. | Request Sample |
| SILIKOPHEN® P 40/W | Evonik Operations GmbH, BL Coating Additives | 用于耐热、抗腐蚀油漆的水性主体树脂。 | Request Sample |
| SILIKOPHEN® P 50/X | Evonik Operations GmbH, BL Coating Additives | 用于耐热抗腐蚀油漆的溶剂型主体树脂。 | Request Sample |
| SILIKOPHEN® P 80/X | Evonik Operations GmbH, BL Coating Additives | 用于耐热抗腐蚀油漆的溶剂型主体树脂。 | Request Sample |
| SILIKOPON® EF | Evonik Operations GmbH, BL Coating Additives | SILIKOPON® EF is a silicone-epoxy resin for high temperature resistant corrosion protection coatings. It is a stoving resin and is distinguished by good adhesion and resistance to solvents. It can be used on concrete walls and floors and for roof tile, pi...展开 SILIKOPON® EF is a silicone-epoxy resin for high temperature resistant corrosion protection coatings. It is a stoving resin and is distinguished by good adhesion and resistance to solvents. It can be used on concrete walls and floors and for roof tile, pipe lining, and commercial transport coatings. Some special features of SILIKOPON® EF includes extraordinary gloss retention and weather resistance, an anti-graffiti effect, excellent corrosion resistance, and is suitable for ultra high solids coatings. 收起 | Request Sample |
| SILIKOPUR® 8081 | Evonik Operations GmbH, BL Coating Additives | 硅改性的聚氨酯乳液，其特点为可产生水珠效果，用于皮革面漆手感滑，极高的柔韧性、良好的重涂性能、良好的自干性、高相容性和可用水稀释 | Request Sample |
| SILIKOTOP® E 900 | Evonik Operations GmbH, BL Coating Additives | SILIKOTOP® E 900 is a branched hydroxyfunctional high-solid silicone-polyester. It is recommended for formulations with very low VOC content, < 250 g/L. It has a low processing viscosity at a very low solvent demand. It also has excellent stone-chipping a...展开 SILIKOTOP® E 900 is a branched hydroxyfunctional high-solid silicone-polyester. It is recommended for formulations with very low VOC content, < 250 g/L. It has a low processing viscosity at a very low solvent demand. It also has excellent stone-chipping and impact resistance, excellent appearance, and good pigment affinity, chemical resistance, and weather resistance. 收起 | Request Sample |
| SILIKOTOP® E 901 | Evonik Operations GmbH, BL Coating Additives | SILIKOTOP® E 901 is a branched hydroxyfunctional high-solid silicone-polyester. It is recommended for formulations with very low VOC content, < 250 g/L. It has a low processing viscosity at a very low solvent demand. It also has excellent stone-chipping a...展开 SILIKOTOP® E 901 is a branched hydroxyfunctional high-solid silicone-polyester. It is recommended for formulations with very low VOC content, < 250 g/L. It has a low processing viscosity at a very low solvent demand. It also has excellent stone-chipping and impact resistance, excellent appearance, and good pigment affinity, chemical resistance, and weather resistance. 收起 | Request Sample |
| SIPERNAT® 820 A | Evonik Operations GmbH, BL Coating Additives | SIPERNAT® 820 A is a sodium aluminium silicate. It is produced by a special precipitation and drying process and is employed as a partial replacement for titanium dioxide. | Request Sample |
| SPHERILEX® DP-0110 | Evonik Operations GmbH, BL Coating Additives | SPHERILEX® DP-0110 has the smallest particle size within the SPHERILEX® family of products, making it ideal for thin film applications or systems where smaller particle-sized pigments are preferred to promote surface smoothness and higher 85-degree gloss....展开 SPHERILEX® DP-0110 has the smallest particle size within the SPHERILEX® family of products, making it ideal for thin film applications or systems where smaller particle-sized pigments are preferred to promote surface smoothness and higher 85-degree gloss. In particular, SPHERILEX® DP-0110 is ideal for achieving burnish-and scrub-resistant satin and eggshell finishes, and, when used in combination with silica matting agents, can enable deep matte, natural-looking wood coatings that have improved scratch, burnish, and mar resistance. It can also significantly improve the hardness of coil coatings. 收起 | Request Sample |
| SPHERILEX® DP-0111 | Evonik Operations GmbH, BL Coating Additives | SPHERILEX® DP-0111 is a precipitated amorphous (crystalline free) silica with unique spherical particle shape and very narrow particle size distribution. | Request Sample |
| SPHERILEX® DP-0112 | Evonik Operations GmbH, BL Coating Additives | SPHERILEX® DP-0112 is a precipitated amorphous (crystalline-free) silica with uniquely spherical particle shape and very narrow particle size distribution. | Request Sample |
| SPHERILEX® DP-0115 | Evonik Operations GmbH, BL Coating Additives | SPHERILEX® DP-0115 is a precipitated amorphous (crystalline-free) silica with uniquely spherical particle shape and very narrow particle size distribution. | Request Sample |
| TEGO® AddBond 2220 ND | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond 2220 improves flexibility and adhesion of solventborne coatings. This soft polyester shows very good compatibility in non-polar formulations. | Request Sample |
| TEGO® AddBond 2325 | Evonik Operations GmbH, BL Coating Additives | 用于溶剂基配方的树脂，可增强与金属表面的附着力，改善防腐性并和多种原料，尤其是聚丙烯酸酯有非常好的配伍性。 | Request Sample |
| TEGO® AddBond DS 1300 | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond DS 1300 improves adhesion of waterborne coatingson steel, galvanized steel, aluminum, and plastics. | Request Sample |
| TEGO® AddBond HS | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond HS improves adhesion and flexibility of solventborne coatings on steel, galvanized steel, aluminum, and plastics. It is highly suitable for high-solid coatings. | Request Sample |
| TEGO® AddBond HS MPA | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond HS improves adhesion and flexibility of solventborne coatings on steel, galvanized steel, aluminum, and plastics. It is highly suitable for high-solid coatings. | Request Sample |
| TEGO® AddBond LP 1600 | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond LP 1600是一种不含溶剂的附着力树脂。它改善内墙涂料的附着性，增加了固体含量，改善了光泽度并提供广泛的可溶性和兼容性。这款产品推荐用于罐头及卷材涂料和工业涂料等。 | Request Sample |
| TEGO® AddBond LP 1611 | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond LP 1611是一种不含溶剂的附着力树脂。它改善内墙涂料的附着性，防腐蚀，并提供光泽性。这款产品提供出色的铝、钢材、镀锌钢以及塑料、PVC和ABS表面的粘度。它鬼将用于罐头及卷材涂料和工业涂料等。 | Request Sample |
| TEGO® AddBond LTW | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond LTW improves adhesion and flexibility of solventborne coatings on steel, galvanized steel, aluminum, and plastics. | Request Sample |
| TEGO® AddBond LTW-B | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond LTW-B improves adhesion and flexibility of solventborne coatings on steel, galvanized steel, aluminum, and plastics. | Request Sample |
| TEGO® Protect 5000 N | Evonik Operations GmbH, BL Coating Additives | 改性聚二甲基硅氧烷树脂，用于生产溶剂型抗涂鸦涂料。 | Request Sample |
| TEGO® Therm HPG 4000 | Evonik Operations GmbH, BL Coating Additives | TEGO® Therm HPG 4000 is a purely mineral product based on silicone dioxide. TEGO® Therm HPG 4000 can be combined with other materials to produce thermal insulation coatings. | Request Sample |
| TEGO® Therm HPG 6806 | Evonik Operations GmbH, BL Coating Additives | TEGO® Therm HPG 6806 is a purely mineral product based on silicone dioxide. TEGO® Therm HPG 6806 can be combined with other materials to produce thermal insulation coatings. | Request Sample |
| TEGO® VariPlus 1201 TF | Evonik Operations GmbH, BL Coating Additives | 多羟基聚氨酯树脂，用于提高有机颜料的着色力，具有高耐光和耐热性 | Request Sample |
| TEGO® VariPlus AP | Evonik Operations GmbH, BL Coating Additives | 酮醛缩聚树脂，改善硬度、光泽并缩短干燥时间。 | Request Sample |
| TEGO® VariPlus CA | Evonik Operations GmbH, BL Coating Additives | 只是一种酮-醛缩合树脂，可以增加固体份，并加快干燥速度 | Request Sample |
| TEGO® VariPlus DS 50 | Evonik Operations GmbH, BL Coating Additives | 这是一种聚氨酯多元醇树脂的阴离子乳液，可以增加颜料润湿和稳定性，并具有出色的耐水性 | Request Sample |
| TEGO® VariPlus SK | Evonik Operations GmbH, BL Coating Additives | 多羟基树脂，用于溶剂型配方，可提高在多种塑料和金属表面的附着力并降低配方的粘度 | Request Sample |
| TEGOMER® H-C 5002 | Evonik Operations GmbH, BL Coating Additives | TEGOMER® H-C 5002 is a low molecular hydroxy-functional polyacrylate. | Request Sample |
| YGA100-1 | Nanjing Yuangang Fine Chemical Co., Ltd. | YGA100-1 is a hydrogenated petroleum resin, in white granular form. This product can be used in coatings, adhesives, hot melt road marking paints, inks, and paint additives. | |
| YGA100-2 | Nanjing Yuangang Fine Chemical Co., Ltd. | YGA100-2 is a hydrogenated petroleum resin, in white granular form. This product can be used in coatings, adhesives, hot melt road marking paints, inks, and paint additives. | |
| YGA110-1 | Nanjing Yuangang Fine Chemical Co., Ltd. | YGA110-1 is a hydrogenated petroleum resin, in white granular form. This product can be used in coatings, adhesives, hot melt road marking paints, inks, and paint additives. | |
| YGA110-2 | Nanjing Yuangang Fine Chemical Co., Ltd. | YGA110-2 is a hydrogenated petroleum resin, in white granular form. This product can be used in coatings, adhesives, hot melt road marking paints, inks, and paint additives. |
