| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展开 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展开 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展开 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起 | |
| Densil® ZOD | Arxada – Troy Corporation | Densil® ZOD is a three-active blend biocide formulated to offer dry-film coating protection in humid environments. Densil® ZOD offers controlled-leaching and low water solubility properties of Zinc Omadine® Antimicrobials, complemented with a water-solubl...展开 Densil® ZOD is a three-active blend biocide formulated to offer dry-film coating protection in humid environments. Densil® ZOD offers controlled-leaching and low water solubility properties of Zinc Omadine® Antimicrobials, complemented with a water-soluble fungicide. Densil® ZOD also contains a supplemental algaecide for complete dry-film protection of the coating. 收起 | |
| Enamel Grade Titanium Dioxide HTD-E | Hoten Chemical International Group | Enamel Grade Titanium Dioxide HTD-E is a white powder made from a sulfuric acid process. This product has a strong opacity making a thin, smooth and acid resistant coating used in enamel and coloring material. | |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展开 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| Fungitrol® 11E | Arxada – Troy Corporation | Fungitrol® 11E is a powdered, non-metallic organic microbiocide for use in solvent-based paints, stains, plastics, compounds, and wood/plastic composites. It is highly effective against a variety of microorganisms and is suitable for use in solvent-borne ...展开 Fungitrol® 11E is a powdered, non-metallic organic microbiocide for use in solvent-based paints, stains, plastics, compounds, and wood/plastic composites. It is highly effective against a variety of microorganisms and is suitable for use in solvent-borne exterior paints and stains. 收起 | |
| Fungitrol™ 400G | Arxada – Troy Corporation | Fungitrol ™ 400G是100％活性IPBC，是自由流动的颗粒形式。它是一种高效的广谱杀菌剂。此产品已于各种应用中广泛使用了很多年，可防止由真菌，霉菌和霉菌引起的损毁和变质。 | |
| Fungitrol® 404-DS | Arxada – Troy Corporation | Fungitrol® 404-DS is a broad-spectrum microbicide for the control of mildew and fungi. It provides excellent performance characteristics when used as a fungicide/mildewcide in aqueous paints, coatings, adhesives, caulks, sealants, grouts, joint compounds,...展开 Fungitrol® 404-DS is a broad-spectrum microbicide for the control of mildew and fungi. It provides excellent performance characteristics when used as a fungicide/mildewcide in aqueous paints, coatings, adhesives, caulks, sealants, grouts, joint compounds, and wood preservative stains. 收起 | |
| Fungitrol® 720 | Arxada – Troy Corporation | Fungitrol® 720 is a fungicide that offers broad-spectrum protection against degradation, discoloration, and defacement caused by mold, mildew, and algae. | |
| Fungitrol™ DP2 | Arxada – Troy Corporation | Fungitrol™ DP2 is a unique wet-state and dry-film preservative in one product. Fungitrol™ DP2 is a highly effective growth inhibitor of fungal and bacterial organisms providing long-term protection of paints in the wet state and the coated surfaces. | |
| HTM-A Barium Sulphate Modified | Hoten Chemical International Group | HTM-A Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creati...展开 HTM-A Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTM-B Barium Sulphate Modified | Hoten Chemical International Group | HTM-B Barium Sulphate Modified is a function filler of nanometer-class developed for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure v...展开 HTM-B Barium Sulphate Modified is a function filler of nanometer-class developed for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTM-C Barium Sulphate Modified | Hoten Chemical International Group | HTM-C Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creati...展开 HTM-C Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTN-NO Barium Sulfate Natural | Hoten Chemical International Group | HTN-NO Barium Sulfate Natural is a natural function filler that can be used in paint and improve concentration of coatings. | |
| HTN-NP Barium Sulfate Natural | Hoten Chemical International Group | HTN-NP Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NQ Barium Sulfate Natural | Hoten Chemical International Group | HTN-NQ Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NR Barium Sulfate Natural | Hoten Chemical International Group | HTN-NR Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NS Barium Sulfate Natural | Hoten Chemical International Group | HTN-NS Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTS-H Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-H Synthetic Barium Sulfate is a chemically synthesized barium sulfate derived from the processing of barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow dist...展开 HTS-H Synthetic Barium Sulfate is a chemically synthesized barium sulfate derived from the processing of barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
| HTS-L Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-L Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribut...展开 HTS-L Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
| HTS-M Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-M Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribut...展开 HTS-M Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| Industrial Grade Zinc Oxide | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Industrial Grade Zinc Oxide is a white, small grain zinc oxide used in production of products like Zinc stearate, zinc bromide, zinc borate, phosphatizing liquid, as well as used in preparation of electroplate liquid. | |
| MERGAL® 128 | Arxada – Troy Corporation | MERGAL® 128 is an effective, broad-spectrum liquid preservative designed to inhibit the growth of bacteria, yeast and fungi in aqueous systems. | |
| MERGAL® 174II | Arxada – Troy Corporation | MERGAL® 174II is a liquid preservative used for the protection of water-based products against microbial spoilage in the wet state. The preservative is applicable at high pH and is compatible in many different systems. | |
| MERGAL® 174IIP | Arxada – Troy Corporation | MERGAL® 174IIP is free-flowing, powdered, organic wet-state preservative designed for use in aqueous products which are subject to bacterial deterioration. | |
| MERGAL® 186 | Arxada – Troy Corporation | MERGAL® 186 is a liquid, water-soluble organic preservative, designed for use in aqueous based systems that are subject to bacterial deterioration. | |
| MERGAL® 395 | Arxada – Troy Corporation | 基于乙内酰脲的水溶性杀菌剂。该产品在宽泛的pH值范围（3-10）内和较高的温度下具有出色的稳定性。 | |
| MERGAL® 530 | Arxada – Troy Corporation | MERGAL® 530 is a broad-spectrum, quick-kill, fast-dissipating biocide that carries a low environmental impact. The non-oxidizing yet extremely rapid biocidal mechanism of this product makes it ideally suited for a wide variety of industrial applications. | |
| MERGAL® 530A | Arxada – Troy Corporation | MERGAL® 530A is a broad-spectrum and quick action preservative with low environmental impact. MERGAL® 530A provides a rapid antimicrobial mechanism, making it ideally suited for a wide variety of industrial applications. MERGAL® 530A is...展开 MERGAL® 530A is a broad-spectrum and quick action preservative with low environmental impact. MERGAL® 530A provides a rapid antimicrobial mechanism, making it ideally suited for a wide variety of industrial applications. MERGAL® 530A is based on DBNPA, and is compatible with other water treatment chemicals such as organic biocides, chlorine and chlorine releasers, dispersants, surfactants, thickeners, corrosion inhibitors, etc. MERGAL® 530A does not contain formaldehyde or components which could split off formaldehyde. 收起 | |
| MERGAL® 711K6 | Arxada – Troy Corporation | 一种用于水性体系的广谱型罐装防腐剂。由于其效力均衡的配方，适用于潮湿的地区以及顶空防护。 | |
| MERGAL® 753 | Arxada – Troy Corporation | MERGAL® 753 is a formaldehyde-free broad-spectrum preservative used to prevent microbial deterioration caused by bacteria, fungi and yeast in water-based systems. MERGAL® 753 is a highly concentrated, free-flowing dispersion. The product is free of formal...展开 MERGAL® 753 is a formaldehyde-free broad-spectrum preservative used to prevent microbial deterioration caused by bacteria, fungi and yeast in water-based systems. MERGAL® 753 is a highly concentrated, free-flowing dispersion. The product is free of formaldehyde and VOC, ensure lower environmental impact & favourable GHS labeling. 收起 | |
| MERGAL® 758 | Arxada – Troy Corporation | MERGAL® 758 is an aqueous broad-spectrum in-can preservative used to prevent deterioration and degradation caused by bacteria, fungi and yeast in aqueous systems. Is a free-flowing, VOC-free and formaldehyde-free dispersion product. Combines fast-acting p...展开 MERGAL® 758 is an aqueous broad-spectrum in-can preservative used to prevent deterioration and degradation caused by bacteria, fungi and yeast in aqueous systems. Is a free-flowing, VOC-free and formaldehyde-free dispersion product. Combines fast-acting properties with long lasting protection. Designed specifically for the protection of paints and plasters or other aqueous systems where contamination is unpredictable, yet formaldehyde is not allowed. Also ideal for applications where a non-alkaline wet-state preservative is desired. 收起 | |
| MERGAL® 786 | Arxada – Troy Corporation | MERGAL® 786 is a broad-spectrum wet-state preservative used to protect against deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. MERGAL® 786 is a highly concentrated, ecologically responsible formulation. It is a free-f...展开 MERGAL® 786 is a broad-spectrum wet-state preservative used to protect against deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. MERGAL® 786 is a highly concentrated, ecologically responsible formulation. It is a free-flowing, aqueous, VOC-free dispersion product. 收起 | |
| MERGAL® BIT 20 | Arxada – Troy Corporation | MERGAL® BIT 20 is an effective broad-spectrum liquid preservative designed to inhibit the growth of micro-organisms such as bacteria, yeast, and fungi in aqueous based formulations. | |
| MERGAL® BIT20W | Arxada – Troy Corporation | MERGAL® BIT20W is a broad-spectrum in-can preservative used to avoid deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. It is a highly concentrated, free-flowing, aqueous, VOC-free dispersion product. | |
| MERGAL® CM 1.5 | Arxada – Troy Corporation | MERGAL® CM 1.5 is a liquid microbiocide for use in various waterborne end-use products, including adhesives, air washer systems, building materials, brewery pasteurizers, can warmer systems, concrete admixtures, conveyor lubricants, emulsions, and ultra f...展开 MERGAL® CM 1.5 is a liquid microbiocide for use in various waterborne end-use products, including adhesives, air washer systems, building materials, brewery pasteurizers, can warmer systems, concrete admixtures, conveyor lubricants, emulsions, and ultra filtrations units. It is suitable for systems with a pH of 3 - 9. 收起 | |
| Mergal® GLT25 | Arxada – Troy Corporation | Mergal® GLT25 is a liquid preservative for the control of bacteria and fungi. The product is used in a wide variety of water-based applications. | |
| Mergal® GLT50 | Arxada – Troy Corporation | Mergal® GLT50 is a liquid preservative that exhibits broad spectrum efficacy against bacteria and fungi. It is a highly concentrated product for use in a wide variety of water-based applications. The low use rates qualify Mergal® GLT50 as an ecologically ...展开 Mergal® GLT50 is a liquid preservative that exhibits broad spectrum efficacy against bacteria and fungi. It is a highly concentrated product for use in a wide variety of water-based applications. The low use rates qualify Mergal® GLT50 as an ecologically responsible product technology ("green"). This product can be use in aqueous or water-containing products and systems, including industrial, institutional, and consumer in-can processes and products. 收起 | |
| MERGAL® K10N | Arxada – Troy Corporation | MERGAL® K10N is an industrial BIT ( 1,2-benzisothiazoline-3-one) based preservative used to prevent deterioration and degradation caused by bacteria in aqueous systems. MERGAL® K10N provides long-term wet-state (in-can) preservation. The product offer exc...展开 MERGAL® K10N is an industrial BIT ( 1,2-benzisothiazoline-3-one) based preservative used to prevent deterioration and degradation caused by bacteria in aqueous systems. MERGAL® K10N provides long-term wet-state (in-can) preservation. The product offer excellent stability and compatibility even with difficult formulations/systems. 收起 | |
| MERGAL® K12N | Arxada – Troy Corporation | MERGAL® K12N is an effective, broad-spectrum liquid preservative designed to inhibit the growth of bacteria, yeast and fungi in aqueous systems. The product is effective when used as a disinfectant or sanitizer for plants and equipment. | |
| MERGAL® K14 | Arxada – Troy Corporation | MERGAL® K14 is an effective, broad-spectrum liquid preservative designed to inhibit the growth of bacteria, yeast and fungi in aqueous systems. | |
| MERGAL® K14G | Arxada – Troy Corporation | MERGAL® K14G is a 'green' product effective at preserving aquoeus systems and functional fluids. MERGAL® K14G is a broad-spectrum and fast-acting preservatve designed to inhibit the growth of bacteria, yeast and fungi in aqueous systems. | |
| MERGAL® K20 | Arxada – Troy Corporation | MERGAL® K20 is a broad spectrum liquid preservative designed to inhibit the growth of micro-organisms such as bacteria, yeasts, and fungi in aqueous based formulations. | |
| MERGAL® K31G | Arxada – Troy Corporation | MERGAL® K31G is a broad-spectrum preservative used to prevent microbial deterioration caused by bacteria, fungi and yeast in 'green' water-based systems. The product is a free-flowing dispersion. MERGAL® K31G does not contain formaldehyde or components wh...展开 MERGAL® K31G is a broad-spectrum preservative used to prevent microbial deterioration caused by bacteria, fungi and yeast in 'green' water-based systems. The product is a free-flowing dispersion. MERGAL® K31G does not contain formaldehyde or components which could split off formaldehyde or volatile organic compounds. 收起 | |
| MERGAL® K32J | Arxada – Troy Corporation | MERGAL® K32J is a broad-spectrum preservative used to prevent microbial deterioration caused by bacteria, fungi and yeast in 'green' water-based systems. The product is a free-flowing dispersion. MERGAL® K32J does not contain formaldehyde or components wh...展开 MERGAL® K32J is a broad-spectrum preservative used to prevent microbial deterioration caused by bacteria, fungi and yeast in 'green' water-based systems. The product is a free-flowing dispersion. MERGAL® K32J does not contain formaldehyde or components which could split off formaldehyde or volatile organic compounds. 收起 | |
| MERGAL® K6N | Arxada – Troy Corporation | 一种用于水性体系的广谱型罐装防腐剂。由于其效力均衡的配方，适用于潮湿的地区以及气相防护。 | |
| MERGAL® K9N | Arxada – Troy Corporation | MERGAL® K9N is an effective wet-state preservative designed to inhibit the growth of bacteria, yeast and fungi in aqueous systems. MERGAL® K9N provides stable & broad-spectrum liquid preservative at cost-effective use levels. | |
| MERGAL® KM200 | Arxada – Troy Corporation | MERGAL® KM200 is an effective in-can preservative used to avoid deterioration and degradation of aqueous systems caused by bacteria. Is fast acting and provides head space protection. | |
| MERGAL® KMP | Arxada – Troy Corporation | MERGAL® KMP is a liquid wet-state preservative used for the protection of water-based products against microbial spoilage. The product is effective against all gram negative and gram positive bacteria, which are central to the spoilage of water-based indu...展开 MERGAL® KMP is a liquid wet-state preservative used for the protection of water-based products against microbial spoilage. The product is effective against all gram negative and gram positive bacteria, which are central to the spoilage of water-based industrial goods and industrial systems. 收起 | |
| MERGAL® MV1.5 | Arxada – Troy Corporation | MERGAL® MV1.5 is a broad-spectrum in-can preservative used to avoid deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. It is a highly concentrated, free-flowing, aqueous, VOC-free dispersion product. | |
| MERGAL® V615 | Arxada – Troy Corporation | O-缩甲醛化合物，主要用于罐内防护。 | |
| MERGAL® V698K4 | Arxada – Troy Corporation | 一种用于所有类型水性体系的防腐剂，大范围抑制细菌、酵母菌和霉菌的活动。 | |
| MERGAL® V698K5 | Arxada – Troy Corporation | MERGAL® V698K5 is a broad-spectrum wet-state preservative used to avoid deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. | |
| MERGAL® V698K6 | Arxada – Troy Corporation | MERGAL® V698K6 is a broad-spectrum wet-state preservative used to avoid deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast . | |
| MERGAL® WP45 | Arxada – Troy Corporation | MERGAL® WP45 is an effective preservative against a wide variety of fungal orgamisms (yeast, molt, staining fungi and mildew) and also contributes to limited control of bacteria. The primary application is protection of surface exposed to fungal spores, i...展开 MERGAL® WP45 is an effective preservative against a wide variety of fungal orgamisms (yeast, molt, staining fungi and mildew) and also contributes to limited control of bacteria. The primary application is protection of surface exposed to fungal spores, in water- or solvent- based produts. MERGAL® WP45 can be used to protect against fungal growth on technical materials in both interior and exterior applcations. 收起 | |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展开 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起 | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展开 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起 | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展开 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展开 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起 | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展开 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Nano Silver Powder TFNP-30 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry. | |
| Nano Silver Powder TFNP-80 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material. | |
| ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. | |
| Nuosept® 44 | Arxada – Troy Corporation | Nuosept® 44 is derived from glycine. It is fast acting, easy to use and handle, and cost competitive. | |
| NUOSEPT® 491 | Arxada – Troy Corporation | NUOSEPT® 491 is a formaldehyde-free, pH-stable liquid preservative designed to inhibit the growth of bacteria in aquoeous systems. The product ig highly stabe and compatiblewith most water-based systems. | |
| NUOSEPT® 95 | Arxada – Troy Corporation | NUOSEPT® 95 is an aqueous solution of organic compounds designed for use as a preservative in water-based products. | |
| NUOSEPT® BM11 | Arxada – Troy Corporation | NUOSEPT® BM11 is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. NUOSEPT® BM11 is a highly concentrated, ecologically responsible formulation. NUOSEPT® BM11 is f...展开 NUOSEPT® BM11 is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. NUOSEPT® BM11 is a highly concentrated, ecologically responsible formulation. NUOSEPT® BM11 is free of formaldehyde, CIT, VOC and AOX. 收起 | |
| NUOSEPT® BM21 | Arxada – Troy Corporation | NUOSEPT® BM21 is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. NUOSEPT® BM21 is a highly concentrated, ecologically responsible formulation. NUOSEPT® BM21 is f...展开 NUOSEPT® BM21 is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. NUOSEPT® BM21 is a highly concentrated, ecologically responsible formulation. NUOSEPT® BM21 is free of formaldehyde, CIT, VOC and AOX. 收起 | |
| NUOSEPT® BM22 | Arxada – Troy Corporation | NUOSEPT® BM22 is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. NUOSEPT® BM22 is a highly concentrated, ecologically responsible formulation. NUOSEPT® BM22 is f...展开 NUOSEPT® BM22 is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. NUOSEPT® BM22 is a highly concentrated, ecologically responsible formulation. NUOSEPT® BM22 is free of formaldehyde, CIT, VOC and AOX. 收起 | |
| NUOSEPT® BM22A | Arxada – Troy Corporation | NUOSEPT® BM22A is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. NUOSEPT® BM22A is a highly concentrated, ecologically responsible formulation. NUOSEPT® BM22A i...展开 NUOSEPT® BM22A is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. NUOSEPT® BM22A is a highly concentrated, ecologically responsible formulation. NUOSEPT® BM22A is free of formaldehyde, CIT, VOC and AOX. 收起 | |
| NUOSEPT® M50C | Arxada – Troy Corporation | NUOSEPT® M50C is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria. NUOSEPT® M50C is a highly concentrated, ecologically responsible formulation. NUOSEPT® M50C is free of formaldehy...展开 NUOSEPT® M50C is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria. NUOSEPT® M50C is a highly concentrated, ecologically responsible formulation. NUOSEPT® M50C is free of formaldehyde, CIT, VOC and AOX 收起 | |
| NUOSEPT® MIT10 | Arxada – Troy Corporation | NUOSEPT® MIT10 is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria. NUOSEPT® MIT10 is a highly concentrated, ecologically responsible formulation. NUOSEPT® MIT10 is free of formald...展开 NUOSEPT® MIT10 is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria. NUOSEPT® MIT10 is a highly concentrated, ecologically responsible formulation. NUOSEPT® MIT10 is free of formaldehyde, CIT, VOC and AOX 收起 | |
| POLYPHASE® 2167 | Arxada – Troy Corporation | POLYPHASE® 2167 is a water-based, zero-VOC preservative designed to protect coated surfaces against a wide variety of microorganisms. POLYPHASE® 2167 is especially effective against the growth of mold, staining fungi and yeast, and also imprts antibacteri...展开 POLYPHASE® 2167 is a water-based, zero-VOC preservative designed to protect coated surfaces against a wide variety of microorganisms. POLYPHASE® 2167 is especially effective against the growth of mold, staining fungi and yeast, and also imprts antibacterial properties to the coating. 收起 | |
| POLYPHASE® 2175 | Arxada – Troy Corporation | POLYPHASE® 2175 is a water-based dry-film preservative designed to protect interior coated surface against microbial growth. POLYPHASE® 2175 is a free-flowing, wter based suspension concentrate with no VOC contribution. | |
| POLYPHASE® 641 | Arxada – Troy Corporation | POLYPHASE® 641 is a liquid fungicide concentrate developed to provide enhanced chemical stability in alkyd systems. It is effective against a wide variety of fungal organisms. This product is based on the active ingredient IPBC. | |
| POLYPHASE® 663 | Arxada – Troy Corporation | POLYPHASE® 663 is one of Troy's advanced broad-spectrum preservatives for water-based coating and other materials. The product offers superior protection against a wide variety of micro-organism such as algae, fungi, surface mold, staining fungi and milde...展开 POLYPHASE® 663 is one of Troy's advanced broad-spectrum preservatives for water-based coating and other materials. The product offers superior protection against a wide variety of micro-organism such as algae, fungi, surface mold, staining fungi and mildew. Due to a high concentration of actives, the product is very cost-effective and offers long-term efficacy. 收起 | |
| POLYPHASE® 678 | Arxada – Troy Corporation | 杀生物剂的水分散体，可以有效抵抗各种类型的真菌生物。其主要应用领域是水性产品，包括对VOC要求严格的领域。 | |
| POLYPHASE® 689 | Arxada – Troy Corporation | POLYPHASE® 689 is a broad-spectrum, water-based film preservative that is effective against a wide vaiety of damaging microorganisms. The perservative is particularly useful in water-based outdoor products in which Volatile Organic Compounds (VOCs) are a...展开 POLYPHASE® 689 is a broad-spectrum, water-based film preservative that is effective against a wide vaiety of damaging microorganisms. The perservative is particularly useful in water-based outdoor products in which Volatile Organic Compounds (VOCs) are a major comcern. POLYPHASE® 689 provides long-lasting protection against both algae & fungi. It is particularly effective for application over cementitious substrates. 收起 | |
| POLYPHASE® 7026 | Arxada – Troy Corporation | POLYPHASE® 7026 is an efficient film preservative against a wide variety of fungal organisms (mold and staining fungi). Its primary application is in water based products. This product can be used to protect against fungal growth in interior and exterior ...展开 POLYPHASE® 7026 is an efficient film preservative against a wide variety of fungal organisms (mold and staining fungi). Its primary application is in water based products. This product can be used to protect against fungal growth in interior and exterior applications. POLYPHASE® 7026 offers excellent fungal dry-film protection to interior and exterior paints, masonry coatings, stucco, pigment dispersion and water based pigmented wood stains. 收起 | |
| POLYPHASE® 7029 | Arxada – Troy Corporation | POLYPHASE® 7029 is a concentrated broad-spectrum dry-film preservative for solvent-based coatings, wood preservatives, stains and other materials, developed to provide enhanceed chemical stability in the presence of driers, raw oils and pigment. |
