| 1,3,5-Tris[(3,3,3-trifluoropropyl)methyl] cyclotrisiloxane FD-1000 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | FD-1000是1.3.5 – 三甲基-1,3,5 – 三（3.3.3 – 三氟丙基）。它以白色晶体形式供货。 | |
| (3,3,3 Tri FluoroPropyl) Methyl Di-Methoxy Silane FD-1001 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | FD-1001是（3,3,3 - 三氟丙基）甲基二甲基硅烷。它以无色液体形式供货。 | |
| Aluminate Coupling Agent FD-804 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | FD-804是一种铝酸盐耦合剂。它可以用于涂料和油漆，提高底漆的粘合力和储存稳定性。这款产品可在含-OH的树脂中用作耦合剂。 | |
| Aluminum-iv-acetylacetonate FD-805 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | FD-805是aluminum-iv-acetylacetonate，以白色粉末形式供货。它可以用于涂料和油漆，提高底漆的粘合力和储存稳定性。这款产品可在一些特种树脂中用作耦合剂。 | |
| Dibutyl Phthalate (DBP) | Regar Chemicals Co., Ltd. | Dibutyl Phthalate (DBP) is a transparent, colorless oily liquid used in nitrocellulose and alkyd resin paints. DBP is also an excellent plasticizing agent and used especially PVC, aldolresin and ethyl cellulose. | |
| Diisobutyl Phthalate (DIBP) | Regar Chemicals Co., Ltd. | Diisobutyl Phthalate (DIBP) is a colorless transparent oily liquid used as an alternative to DBP (Dibutyl Phthalate). It is used in nitrocellulose and alkyd resin paints. | |
| Diisononyl Phthalate (DINP) | Regar Chemicals Co., Ltd. | Diisononyl Phthalate (DINP) is a transparent, colorless oily liquid. It can be used as a tensile strength and flexibility enhancing agent for nitrocellulose paints. It has a low volatility, low separability, low migration properties along with high aging ...展开 Diisononyl Phthalate (DINP) is a transparent, colorless oily liquid. It can be used as a tensile strength and flexibility enhancing agent for nitrocellulose paints. It has a low volatility, low separability, low migration properties along with high aging resistance. 收起 | |
| Dioctyl Phthalate(DOP) | Regar Chemicals Co., Ltd. | Dioctyl Phthalate(DOP) is a transparent, colorless oily liquid used to increase the flexibility and tensile strength of nitrocellulose paints. It provides good solubility for many components used in paint and has low volatility, low separability and good ...展开 Dioctyl Phthalate(DOP) is a transparent, colorless oily liquid used to increase the flexibility and tensile strength of nitrocellulose paints. It provides good solubility for many components used in paint and has low volatility, low separability and good conductance properties. 收起 | |
| EMULTROL DFM AFO-3 | Concentrol, S.A., Productos | EMULTROL DFM AFO-3 is an emineral oil defoamer for emulsion paints and coatings, also indicated for use during the production process of emulsions. It is specially formulated for application in the textile sector for chemical products and industrial proce...展开 EMULTROL DFM AFO-3 is an emineral oil defoamer for emulsion paints and coatings, also indicated for use during the production process of emulsions. It is specially formulated for application in the textile sector for chemical products and industrial processes. It is a stable product, compatible with most chemical products over a wide pH spectrum. It is a non-ionic emulsion, free of alkylphenols and ethoxylates. Excellent dispersing performance in foaming systems. 收起 | |
| EMULTROL DFM AFO-5 | Concentrol, S.A., Productos | EMULTROL DFM AFO-5 is an emulsion of hydrophobic substances in vegetable oils. It has been specially formulated for use in textile, chemical and general industrial processes. Its main applications are in the field of wastewater treatment plants. This high...展开 EMULTROL DFM AFO-5 is an emulsion of hydrophobic substances in vegetable oils. It has been specially formulated for use in textile, chemical and general industrial processes. Its main applications are in the field of wastewater treatment plants. This highly stable product is compatible with a wide range of chemical products over wide pH range. 收起 | |
| EMULTROL DFM AFO-6 | Concentrol, S.A., Productos | EMULTROL DFM AFO-6 is a mineral oil based defoamer for paints and coatings, also indicated for use during the production process of emulsions. EMULTROL DFM AFO-6 is specially formulated for application in the textile sector for chemical products and indus...展开 EMULTROL DFM AFO-6 is a mineral oil based defoamer for paints and coatings, also indicated for use during the production process of emulsions. EMULTROL DFM AFO-6 is specially formulated for application in the textile sector for chemical products and industrial processes. It is a stable product, compatible with most chemical products over a wide pH range. It is a non-ionic emulsion, free of alkylphenols and ethoxylates. Excellent dispersing performance in foaming systems. Its effect is maintained over a wide time span, making it unnecessary to constantly repeat dosage. 收起 | |
| EMULTROL DFM AFO-7 | Concentrol, S.A., Productos | EMULTROL DFM AFO-7 defoamer has been specially formulated for being used in textile, chemical and general industrial processes. Non-ionic emulsion, free from alkylphenols ethoxylates. Excellent dispersion in foaming systems. Highly stable product, compati...展开 EMULTROL DFM AFO-7 defoamer has been specially formulated for being used in textile, chemical and general industrial processes. Non-ionic emulsion, free from alkylphenols ethoxylates. Excellent dispersion in foaming systems. Highly stable product, compatible with a wide range of chemical products over wide pH range. Its long term foam inhibition effect permits usage of low dosages. 收起 | |
| EMULTROL DFM CP-1 | Concentrol, S.A., Productos | EMULTROL DFM CP-1 is a highly stable silicone antifoam compound formulated to control foam creation in aqueous systems. | |
| EMULTROL DFM CP-14 | Concentrol, S.A., Productos | EMULTROL DFM CP-14 is a silicone antifoam compound, mainly for a wide range of aqueous and nonaqueous industrial applications. | |
| EMULTROL DFM CP-6 | Concentrol, S.A., Productos | EMULTROL DFM CP-6 is a silicone anti-foam compound, mainly for textile applications where a water dispersible anti-foam is needed. | |
| EMULTROL DFM CP-8 | Concentrol, S.A., Productos | EMULTROL DFM CP-8 is a silicone anti-foam compound, mainly for kraft and sulfite process stock washing. Emulsifiable anti-foam concentrate which can be used in very small dosage compared with traditional oil-based anti-foams. | |
| EMULTROL DFM DV-1 | Concentrol, S.A., Productos | EMULTROL DFM DV-1 antifoam emulsion has been formulated for use in general industrial processes, formulation of chemical products and wastewater treatment plants. The product can be used in textile sector, showing good compatibility with dye stuffs, surfa...展开 EMULTROL DFM DV-1 antifoam emulsion has been formulated for use in general industrial processes, formulation of chemical products and wastewater treatment plants. The product can be used in textile sector, showing good compatibility with dye stuffs, surfactants and textile auxiliaries. Control foams in the processes of dyeing, printing, bleaching, scouring, finishing and sizing. 收起 | |
| EMULTROL DFM DV-110 | Concentrol, S.A., Productos | EMULTROL DFM DV-110 antifoam has been formulated for use in general industrial processes in very low concentrations. | |
| EMULTROL DFM DV-25 | Concentrol, S.A., Productos | EMULTROL DFM DV-25 antifoam emulsion has been specially formulated for use in textile, chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming ...展开 EMULTROL DFM DV-25 antifoam emulsion has been specially formulated for use in textile, chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. 收起 | |
| EMULTROL DFM DV-8 P | Concentrol, S.A., Productos | EMULTROL DFM DV-8 P antifoam emulsion has been specially formulated for use in textile, chemical and general industrial processes. The product has been specially formulated in order to cover the requirements in waste-water treatment plants. | |
| EMULTROL DFM OL-4 | Concentrol, S.A., Productos | EMULTROL DFM OL-4 antifoaming has been specially formulated for use in chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its lon...展开 EMULTROL DFM OL-4 antifoaming has been specially formulated for use in chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. 收起 | |
| EMULTROL DFM OL-9 | Concentrol, S.A., Productos | EMULTROL DFM OL-9 has been specially formulated to be used in sistems with high superficial foam formation usually found in paper pulp processes. It is a stable product, compatible with most chemical products over a wide pH spectrum. Its effect is maintai...展开 EMULTROL DFM OL-9 has been specially formulated to be used in sistems with high superficial foam formation usually found in paper pulp processes. It is a stable product, compatible with most chemical products over a wide pH spectrum. Its effect is maintained over a wide time span, making it unnecessary to constantly repeat dosage. EMULTROL DFM OL-9 should be added at a point of high agitation to ensure a good dispersion. The dosage of application is between 50 and 800 grams per ton of paper manufactured, depending on the grade and type of foam. 收起 | |
| EMULTROL DFM OLM-12 | Concentrol, S.A., Productos | EMULTROL DFM OLM-12 defoamer has been specially formulated for use in textile, chemical and general industrial processes. Its main application is wastewater treatment. Highly stable product, compatible with a wide range of chemical products over wide pH r...展开 EMULTROL DFM OLM-12 defoamer has been specially formulated for use in textile, chemical and general industrial processes. Its main application is wastewater treatment. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. 收起 | |
| EMULTROL DFM OLM-14 | Concentrol, S.A., Productos | EMULTROL DFM OLM-14 has been specially formulated for being used in industrial processes, especially in the control of foam in wastewater treatment plants. It is a low viscosity product, easy to handle and dispense. It has an excellent dispersion in foami...展开 EMULTROL DFM OLM-14 has been specially formulated for being used in industrial processes, especially in the control of foam in wastewater treatment plants. It is a low viscosity product, easy to handle and dispense. It has an excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. The product must be used directly without prior dilution. 收起 | |
| EMULTROL DFM OLM-15 | Concentrol, S.A., Productos | EMULTROL DFM OLM-15 defoamer has been specially formulated for use in textile, chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems....展开 EMULTROL DFM OLM-15 defoamer has been specially formulated for use in textile, chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. 收起 | |
| EMULTROL DFM OLM-17 | Concentrol, S.A., Productos | EMULTROL DFM OLM-17 is a mineral oil defoamer for water borne applications. It is specially recommended for systems with good emulsifying properties, such as surfactant stabilized emulsions and emulsion paint. Its long term foam inhibition effect permits ...展开 EMULTROL DFM OLM-17 is a mineral oil defoamer for water borne applications. It is specially recommended for systems with good emulsifying properties, such as surfactant stabilized emulsions and emulsion paint. Its long term foam inhibition effect permits usage of a single dose. 收起 | |
| EMULTROL DFM OLM-18 | Concentrol, S.A., Productos | EMULTROL DFM OLM-18 is a mineral oil defoamer fore mulsion paints, coatings and adhesives, also indicated for use during the production process of emulsions. Excellent performance in acrylic and PVA dispersions. It is a stable product, compatible with mos...展开 EMULTROL DFM OLM-18 is a mineral oil defoamer fore mulsion paints, coatings and adhesives, also indicated for use during the production process of emulsions. Excellent performance in acrylic and PVA dispersions. It is a stable product, compatible with most chemical products over a wide range of pH. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose. 收起 | |
| EMULTROL DFM OLM-20 | Concentrol, S.A., Productos | EMULTROL DFM OLM-20 is formulated with high purity white mineral oils which, unlike conventional mineral oils, have a neutral color and smell. This prevents the yellowing of the paint and the generation of odors. This product is recommended for high-end p...展开 EMULTROL DFM OLM-20 is formulated with high purity white mineral oils which, unlike conventional mineral oils, have a neutral color and smell. This prevents the yellowing of the paint and the generation of odors. This product is recommended for high-end paints. 收起 | |
| EMULTROL DFM OLM-22 | Concentrol, S.A., Productos | EMULTROL DFM OLM-22 is a white oil defoamer for water based dispersions, coatings and adhesives, also indicated for use during the production process of emulsions. It is a stable product, compatible with most chemical products over a wide range of pH. Exc...展开 EMULTROL DFM OLM-22 is a white oil defoamer for water based dispersions, coatings and adhesives, also indicated for use during the production process of emulsions. It is a stable product, compatible with most chemical products over a wide range of pH. Excellent dispersion in foaming systems. 收起 | |
| EMULTROL DFM OLV-52 | Concentrol, S.A., Productos | EMULTROL DFM OLV-52 has been specially formulated for being used in food products. The product is suitable for being used as defoaming agent in food processes such as washing potatoes, fruits and green vegetables; and cleaning of other foods such as fish ...展开 EMULTROL DFM OLV-52 has been specially formulated for being used in food products. The product is suitable for being used as defoaming agent in food processes such as washing potatoes, fruits and green vegetables; and cleaning of other foods such as fish and shellfish. It can be easily dispersed in foaming systems and it has long term foam inhibition effect. It should be used directly, used manually or with automatic dosage system. 收起 | |
| EMULTROL DFM OLV-54 | Concentrol, S.A., Productos | EMULTROL DFM OLV-54 is a vegetable oil defoamer for emulsion paints, coatings and adhesives, also indicated for use during the production process of emulsions. Excellent performance in acrylic and PVA dispersions. It is a stable product, compatible with m...展开 EMULTROL DFM OLV-54 is a vegetable oil defoamer for emulsion paints, coatings and adhesives, also indicated for use during the production process of emulsions. Excellent performance in acrylic and PVA dispersions. It is a stable product, compatible with most chemical products over a wide range of pH. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose. 收起 | |
| EMULTROL DFM P-20 | Concentrol, S.A., Productos | EMULTROL DFM P-20 antifoam has been specially formulated for controlling foam in biotechnology applications, ultrafiltration systems, fermentation, detergents, fertilizers and food processing. The product is stable and compatible with most chemical produc...展开 EMULTROL DFM P-20 antifoam has been specially formulated for controlling foam in biotechnology applications, ultrafiltration systems, fermentation, detergents, fertilizers and food processing. The product is stable and compatible with most chemical products in a wide pH range (1-14). It should be added to dry products to prevent foaming when liquids are added at the point of use. 收起 | |
| EMULTROL DFM PG-100 FR | Concentrol, S.A., Productos | EMULTROL DFM PG-100 FR is a silicone-free polymeric antifoam formulated to control the foam creation in aqueous systems. | |
| EMULTROL DFM PG-100 PK | Concentrol, S.A., Productos | EMULTROL DFM PG-100 PK has been specially formulated for being used in aqueous applications from room temperature. The product is stable and compatible with most of the chemical products in a wide range of pH. The product can be used directly, used manual...展开 EMULTROL DFM PG-100 PK has been specially formulated for being used in aqueous applications from room temperature. The product is stable and compatible with most of the chemical products in a wide range of pH. The product can be used directly, used manually or with automatic dosage system. The product is suitable for use in food processes such as washing potatoes, fruits, green vegetables, seafood and drink packaging processes. It can also be used in other processes such as the processing of cellulose. 收起 | |
| EMULTROL DFM PGM-100 CB | Concentrol, S.A., Productos | EMULTROL DFM PGM-100 CB defoamer has been specially formulated for the treatment of wastewater from slaughterhouses cleaning processes. Highly effective in the prevention and elimination of the foam caused by organic material, fats and blood. Highly stabl...展开 EMULTROL DFM PGM-100 CB defoamer has been specially formulated for the treatment of wastewater from slaughterhouses cleaning processes. Highly effective in the prevention and elimination of the foam caused by organic material, fats and blood. Highly stable product, compatible with a wide range of chemical products over wide pH range. 收起 | |
| EMULTROL DFM PGM-60 CV | Concentrol, S.A., Productos | EMULTROL DFM PG-60 CV defoamer has been specially formulated for the treatment of wastewater from cleaning processes with organic material (slaughterhouses). Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a ...展开 EMULTROL DFM PG-60 CV defoamer has been specially formulated for the treatment of wastewater from cleaning processes with organic material (slaughterhouses). Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose. Highly stable product, compatible with a wide range of chemical products over wide pH range. 收起 | |
| Grinding Dispersant FD-6001 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | FD-6001是一种研磨分散剂，用于无机颜料和填料。它有助于改善粉末流动性和减少能源消耗，减少粉末吸收量，改善粉末在塑料和橡胶制品中的分散，并改善下游产品的表面光滑度。这款产品特别推荐用于二氧化钛，氢氧化铝，滑石和碳酸钙。 | |
| ORDISOL SWT-01 | Concentrol, S.A., Productos | ORDISOL SWT-01 is a silicone surfactant for application in aqueous systems. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. | |
| ORDISOL SWT-01 R | Concentrol, S.A., Productos | ORDISOL SWT-01 R is a silicone surfactant for application in aqueous systems with poor wetting. It has a special siloxane structure that promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surf...展开 ORDISOL SWT-01 R is a silicone surfactant for application in aqueous systems with poor wetting. It has a special siloxane structure that promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. ORDISOL SWT-01 Rs low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. 收起 | |
| ORDISOL SWT-03 | Concentrol, S.A., Productos | ORDISOL SWT-03 is a silicone additive. In aqueous systems, it provides good repaintability, low foaming, improves pore wetting in wood coatings and also improves leveling. ORDISOL SWT-03 can be used in a wide range of applications, including coatings for ...展开 ORDISOL SWT-03 is a silicone additive. In aqueous systems, it provides good repaintability, low foaming, improves pore wetting in wood coatings and also improves leveling. ORDISOL SWT-03 can be used in a wide range of applications, including coatings for wood and furniture, and varnishes. 收起 | |
| ORDISOL SWT-04 | Concentrol, S.A., Productos | ORDISOL SWT-04 is a silicone based additive for waterborne formulations of finishing auxiliaries. | |
| ORDISOL SWT-05 | Concentrol, S.A., Productos | ORDISOL SWT-05 is a silicone surfactant in aqueous systems and solvent based systems. It may be added either as a feed or prediluted in suitable solvents, and is soluble in aqueous solution. ORDISOL SWT-05 has excellent slip, improves flow, and provides a...展开 ORDISOL SWT-05 is a silicone surfactant in aqueous systems and solvent based systems. It may be added either as a feed or prediluted in suitable solvents, and is soluble in aqueous solution. ORDISOL SWT-05 has excellent slip, improves flow, and provides an additional anti-blocking effect. 收起 | |
| ORDISOL SWT-06 | Concentrol, S.A., Productos | ORDISOL SWT-06 is a silicone additive for use in the coatings industry. It is highly effective, compatible, and offers an improvement to scratch resistance. | |
| ORDISOL SWT-07 | Concentrol, S.A., Productos | ORDISOL SWT-07 is a silicone surfactant for a wide variety of applications. It improves flow and leveling properties in solvent-based, solvent-free or water-based coatings systems. ORDISOL SWT-07 can be used in both transparent coatings and pigmented coat...展开 ORDISOL SWT-07 is a silicone surfactant for a wide variety of applications. It improves flow and leveling properties in solvent-based, solvent-free or water-based coatings systems. ORDISOL SWT-07 can be used in both transparent coatings and pigmented coating systems. 收起 | |
| ORDISOL SWT-10 | Concentrol, S.A., Productos | ORDISOL SWT-10 is a silicone surfactant that can be used in a wide range of applications. It improves flow and leveling properties in solvent based coatings systems, solventless systems and water soluble systems. ORDISOL SWT-10 also provides wear and scra...展开 ORDISOL SWT-10 is a silicone surfactant that can be used in a wide range of applications. It improves flow and leveling properties in solvent based coatings systems, solventless systems and water soluble systems. ORDISOL SWT-10 also provides wear and scratch resistance. 收起 | |
| ORDISOL SWT-11 | Concentrol, S.A., Productos | ORDISOL SWT-11 is a silicone surfactant for application in aqueous systems with poor wetting. It has a special siloxane structure which promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfa...展开 ORDISOL SWT-11 is a silicone surfactant for application in aqueous systems with poor wetting. It has a special siloxane structure which promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. ORDISOL SWT-11s low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. 收起 | |
| ORDISOL SWT-13 | Concentrol, S.A., Productos | ORDISOL SWT-13 is a silicone surface additive with an average reduction of surface tension. It is solvent free and suitable for aqueous or solvent based systems. Improvement in slippage, leveling and gloss of the surface is obtained. The formation of Béna...展开 ORDISOL SWT-13 is a silicone surface additive with an average reduction of surface tension. It is solvent free and suitable for aqueous or solvent based systems. Improvement in slippage, leveling and gloss of the surface is obtained. The formation of Bénard cells is avoided. This additive also improves the wetting of the substrate and provides antiblocking properties. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. It is recommended for use in all systems where solvent-free additives are required. 收起 | |
| ORDISOL SWT-13 XI | Concentrol, S.A., Productos | ORDISOL SWT-13 XI is a silicone surface additive with an average reduction of surface tension. It provides slippage, leveling and gloss of the surface. The formation of Bénard cells is avoided. This additive also improves the wetting of the substrate and ...展开 ORDISOL SWT-13 XI is a silicone surface additive with an average reduction of surface tension. It provides slippage, leveling and gloss of the surface. The formation of Bénard cells is avoided. This additive also improves the wetting of the substrate and provides antiblocking properties. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. ORDISOL SWT-13 XI is recommended for use in solvent systems. 收起 | |
| ORDISOL SWT-13-100 | Concentrol, S.A., Productos | ORDISOL SWT-13-100 is a silicone additive. It provides improved slippage, leveling, and anti-blocking properties. ORDISOL SWT-13-100 is recommended for use in all systems where solvent-free additives are required or special solvents are required. | |
| ORDISOL SWT-14 | Concentrol, S.A., Productos | ORDISOL SWT-14 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it d...展开 ORDISOL SWT-14 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. Its low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. 收起 | |
| ORDISOL SWT-15 | Concentrol, S.A., Productos | ORDISOL SWT-15 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it d...展开 ORDISOL SWT-15 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. Its low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. 收起 | |
| ORDISOL SWT-16 | Concentrol, S.A., Productos | ORDISOL SWT-16 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it d...展开 ORDISOL SWT-16 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. Its low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. 收起 | |
| ORDISOL SWT-17 | Concentrol, S.A., Productos | ORDISOL SWT-17 is a silicone surfactant for a wide variety of applications. It improves flow and leveling properties in solvent based coatings systems, solventless systems and water soluble systems. ORDISOL SWT-17 also inhibits the formation of surface de...展开 ORDISOL SWT-17 is a silicone surfactant for a wide variety of applications. It improves flow and leveling properties in solvent based coatings systems, solventless systems and water soluble systems. ORDISOL SWT-17 also inhibits the formation of surface defects, and provides wear and scratch resistance. 收起 | |
| ORDISOL SWT-18 | Concentrol, S.A., Productos | ORDISOL SWT-18 is a silicone surfactant for application in aqueous systems, printing inks and overprint sheets. It offers a high reduction of the surface tension, improving the wetting without increasing the slip. Due to its chemical structure, it is suit...展开 ORDISOL SWT-18 is a silicone surfactant for application in aqueous systems, printing inks and overprint sheets. It offers a high reduction of the surface tension, improving the wetting without increasing the slip. Due to its chemical structure, it is suitable in aqueous systems containing a small amount of organic co-solvent. 收起 | |
| ORDISOL SWT-24 | Concentrol, S.A., Productos | ORDISOL SWT-24 is a silicone surfactant for application in aqueous and non-aqueous systems (solvent base) with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in all types of systems. As it is a non-...展开 ORDISOL SWT-24 is a silicone surfactant for application in aqueous and non-aqueous systems (solvent base) with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in all types of systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. 收起 | |
| ORDISOL SWT-31 | Concentrol, S.A., Productos | ORDISOL SWT-31 is a universal application silicone additive that offers an average reduction in surface tension, effective anticraters and improved slippage. In coatings increases gloss and leveling and in aqueous systems helps to improve antiblocking pro...展开 ORDISOL SWT-31 is a universal application silicone additive that offers an average reduction in surface tension, effective anticraters and improved slippage. In coatings increases gloss and leveling and in aqueous systems helps to improve antiblocking properties. Polydimethylsiloxanes modified with polyethers are additives with great ease of use. Problems associated with the use of silicone oils (PDMS) are not encountered with these additives. No contamination problems or surface defects are expected with the use of these additives. 收起 | |
| ORDISOL SWT-33 | Concentrol, S.A., Productos | ORDISOL SWT-33 is a silicone additive for printing inks, overprint varnishes and for adhesive and coating systems, solvent based, solvent free and aqueous. It is highly effective at very low concentrations, generally in the range of 0.01% - 0.3% by weight...展开 ORDISOL SWT-33 is a silicone additive for printing inks, overprint varnishes and for adhesive and coating systems, solvent based, solvent free and aqueous. It is highly effective at very low concentrations, generally in the range of 0.01% - 0.3% by weight over the total formulation. Its dosage can be increased to values of 1% in aqueous and UV curing systems. In all the previous applications offers a strong decrease of the surface tension. 收起 | |
| ORDISOL SWT-400 | Concentrol, S.A., Productos | ORDISOL SWT-400 is a silicone additive that imparts anti-blocking properties, abrasion resistance, lubricity and perfect compatibility with aqueous, alcoholic or solvent based systems. Being a non-ionic additive, it has perfect compatibility with a wide r...展开 ORDISOL SWT-400 is a silicone additive that imparts anti-blocking properties, abrasion resistance, lubricity and perfect compatibility with aqueous, alcoholic or solvent based systems. Being a non-ionic additive, it has perfect compatibility with a wide range of organic surfactants. Perfectly compatible with polyurethane coatings in which it offers anti-blocking properties and improves abrasion resistance. 收起 | |
| ORDISOL SWT-45 | Concentrol, S.A., Productos | ORDISOL SWT-45 is a silicone additive of universal application with good effectiveness against the formation of craters and improvement in the surface slip. It improves sliding, fluidity and has a good anti-crater effect. Suitable for solvent based and wa...展开 ORDISOL SWT-45 is a silicone additive of universal application with good effectiveness against the formation of craters and improvement in the surface slip. It improves sliding, fluidity and has a good anti-crater effect. Suitable for solvent based and water based systems, varnishes, pigmented systems. Especially recommended for finishing lacquers and suitable for primer coatings. 收起 | |
| ORDISOL SWT-57 | Concentrol, S.A., Productos | ORDISOL SWT-57 is a silicone additive for application in paints, inks and coatings. Is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl resin systems. The finishes that have incorporated the ORDISOL...展开 ORDISOL SWT-57 is a silicone additive for application in paints, inks and coatings. Is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl resin systems. The finishes that have incorporated the ORDISOL SWT-57 can be repainted in most cases. 收起 | |
| Polyether Modified Siloxane FD-408 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | FD-408是具有低表面张力和良好透气性的聚醚改性硅氧烷。由于它具有出色的延展性和渗透性，可以用作涂料和水基油墨的基底湿润剂。这款产品还可以用作水基聚氨酯的湿润剂和流平剂。 | |
| R-8004 Siloxane Masterbatch | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | R-8004 Siloxane Masterbatch是一种超高分子量硅氧烷聚合物。它提供更好的加工流动性，润滑性和塑料脱模能力以减少设备摩擦损耗和减少积聚。它还提供更好的抗刮擦性，出色的稳定性，低流动性，更好的阻燃性以及更高的电缆速度。这款产品是硅润滑剂，在塑料行业中用作处理剂。还可以用于减少玻璃纤维增强复合材料的表面缺陷。R-8004有高于70%的硅氧烷含量。 | |
| R-8005 Siloxane Masterbatch | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | R-8005 Siloxane Masterbatch是一种超高分子量硅氧烷聚合物。它提供更好的加工流动性，润滑性和塑料脱模能力以减少设备摩擦损耗和减少积聚。它还提供更好的抗刮擦性，出色的稳定性，低流动性，更好的阻燃性以及更高的电缆速度。这款产品是硅润滑剂，在塑料行业中用作处理剂。还可以用于减少玻璃纤维增强复合材料的表面缺陷。R-8004有高于70%的硅氧烷含量。 | |
| R-8012 Masonry Water Repellent | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | R-8012 Masonry Water Repellent是硅氧烷乳液。它具有出色的防水性能，高透气性，能减少基材吸收水分，并有出色的涂层性能。这款产品推荐用于混凝土，石头，砖瓦，木材，涂料和石膏砂浆防水处理。 | |
| R-8601 Alkyl Modified Polysiloxane | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | R-8601 Alkyl Modified Polysiloxane提供实用反应性，良好的表面湿润性和低沉淀性。它的优势还包括全面的通用性，更好的复合材料机械性能以及无机填料和聚合物之间更好的相容性。 | |
| Silane Coupling Agent FD-6150 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | FD-6150是一种改性氨基-烷基多官能低聚硅烷。它用作粘性促进剂十分有效。FD-6150的特点包括在无底漆基材上更好的粘合性，更快的固化速度，减少黄变，更好的疏水性，更大的灵活性和低VOC。 | |
| Silane Coupling Agent KH-151 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-151 silane, vinyltriethoxysilane, is a vinyl-functional silane that may be used to improve the bond between glass fiber or mineral fillers and resins that are reactive towards the vinyl group. It is also employed to functionalize resins via free radica...展开 KH-151 silane, vinyltriethoxysilane, is a vinyl-functional silane that may be used to improve the bond between glass fiber or mineral fillers and resins that are reactive towards the vinyl group. It is also employed to functionalize resins via free radical mechanisms-copolymerization or grafting and to modify surfaces. It is used as a coupling agent in filled polymer systems, which cure via a free radical mechanism. It is also is used as a finish for glass or a binder additive in glass-reinforced polyester resins, as well as an integral additive in mineral-filled polyester or DAP resin compounds. 收起 | |
| Silane Coupling Agent KH-171 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-171 is a colorless transparent liquid used as a polymer modifier via grafting reactions. The resulting pendant trimethoxysilyl groups can function as moisture-activated crosslinking sites. The silane grafted polymer is processed as a thermoplastic and ...展开 KH-171 is a colorless transparent liquid used as a polymer modifier via grafting reactions. The resulting pendant trimethoxysilyl groups can function as moisture-activated crosslinking sites. The silane grafted polymer is processed as a thermoplastic and crosslinking occurs after fabrication of the finished article upon exposure to moisture. 收起 | |
| Silane Coupling Agent KH-172 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-172 is a colorless transparent, vinyl-functional coupling agent that promotes adhesion among unsaturated, polyester-type resins or crosslinked polyethylene resins or elastomers and inorganic substrates, including fiber glass, silica, silicates and many...展开 KH-172 is a colorless transparent, vinyl-functional coupling agent that promotes adhesion among unsaturated, polyester-type resins or crosslinked polyethylene resins or elastomers and inorganic substrates, including fiber glass, silica, silicates and many metal oxides. When used as coupling agent, it reduces the sensitivity of the products mechanical and electrical properties to heat and/or moisture. 收起 | |
| Silane Coupling Agent KH-300 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-300 is a colorless transparent liquid silane coupling agent. It is the main material to produce other silane coupling agents and a variety of silicone materials. As a kind of rubber process auxiliary agent, it can be used to couple inorganic fillers in...展开 KH-300 is a colorless transparent liquid silane coupling agent. It is the main material to produce other silane coupling agents and a variety of silicone materials. As a kind of rubber process auxiliary agent, it can be used to couple inorganic fillers in a variety of halogenated rubber, such as: neoprene rubber, chlorobutyl rubber, and chlorosulfonated polyethylene rubber. It is used to produce light-color products to improve various physical and mechanical properties. Also applied in anti mildew smell finishing agent, antistatic agent, and blood coagulant agent. 收起 | |
| Silane Coupling Agent KH-350 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-350 is a high purity, undiluted N-octyltriethoxy-silane. When diluted with an appropriate solvent, it can be used in the formulation of water repellent products. Upon proper application, the formulated product will penetrate and provide water repellenc...展开 KH-350 is a high purity, undiluted N-octyltriethoxy-silane. When diluted with an appropriate solvent, it can be used in the formulation of water repellent products. Upon proper application, the formulated product will penetrate and provide water repellency by chemically reacting with the cementitious substrate. Treated substrates are hydrophobic and retain their original appearance. KH-350 can also be used to improve the compatibility of mineral fillers or pigments in polyolefins or to ease their dispersion in nonpolar matrices. 收起 | |
| Silane Coupling Agent KH-360 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-360 is a colorless, transparent liquid alkylalkoxysilane. It is an important component in sol-gel systems. It is used as a crosslinking agent for room temperature cured silicone rubber, coupling agent for glass fiber and SiO2, as well as a strengthenin...展开 KH-360 is a colorless, transparent liquid alkylalkoxysilane. It is an important component in sol-gel systems. It is used as a crosslinking agent for room temperature cured silicone rubber, coupling agent for glass fiber and SiO2, as well as a strengthening treatment agent for plastic-layer pressing material. The most common alkoxy crosslinkers are methoxy or ethoxy silanes due to their high reactivity. The reaction precedes by nucleophilic substitution usually in the presence of acid or base catalysts. Alkoxides react directly with silanols or with water to produce silanols. 收起 | |
| Silane Coupling Agent KH-370 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-370 is a colorless liquid alkylalkoxysilane, an important component in sol-gel systems. It is used as a crosslinking agent for room temperature cured silicone rubber, coupling agent for glass fiber and SiO2, a strengthening treatment agent for plastic-...展开 KH-370 is a colorless liquid alkylalkoxysilane, an important component in sol-gel systems. It is used as a crosslinking agent for room temperature cured silicone rubber, coupling agent for glass fiber and SiO2, a strengthening treatment agent for plastic-layer pressing material. The most common alkoxy crosslinkers are methoxy or ethoxy silanes due to their high reactivity. The reaction precedes by nucleophilic substitution usually in the presence of acid or base catalysts. Alkoxides react directly with silanols or with water to produce silanols. 收起 | |
| Silane Coupling Agent KH-550 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-550是一种多用氨基官能耦合剂，在多种应用中使用，使无机基质和有机聚合物更好的结合起来。该分子的含硅部分对基质提供更好的粘合性。主要氨基酸官能与多种热固性、热塑性和弹性体材料均能进行反应。它可以与水反应。应该采取预防措施，避免与空气中的水分接触。它在RTV硅和其它混合粘合剂中都是出色的的粘合促进剂。它同时也是用于混合和聚氨酯密封剂的底漆系统中的有效成分。 | |
| Silane Coupling Agent KH-551 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-551 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler, or reinforcement and resins that react with the amino group. It is especially recommended to thermopla...展开 KH-551 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler, or reinforcement and resins that react with the amino group. It is especially recommended to thermoplastic and thermosetting resins such as epoxy, PBT, and polyurethane. It can improve reinforced plastic's physical properties and electric properties as flexural strength, compression strength, and shear strength. KH-551 also can improve the dispersion and wet ability of filler in the high molecular materials. It is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. 收起 | |
| Silane Coupling Agent KH-560 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-560 is a epoxy-functional silane. It is a clear, light straw liquid. It may be used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass roving size-b...展开 KH-560 is a epoxy-functional silane. It is a clear, light straw liquid. It may be used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass roving size-binders. KH-560 is particularly employed as an adhesion-promoting additive in waterborne systems, e.g. improving the adhesion of acrylic latex sealants. 收起 | |
| Silane Coupling Agent KH-570 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-570 is a methacryl-functional silane. It is a clear, light and heat sensitive liquid with a faintly sweet odor. It is used as adhesion promoter at organic/inorganic interfaces, as a surface modifier, or as crosslinking of polymers. It is used as a coup...展开 KH-570 is a methacryl-functional silane. It is a clear, light and heat sensitive liquid with a faintly sweet odor. It is used as adhesion promoter at organic/inorganic interfaces, as a surface modifier, or as crosslinking of polymers. It is used as a coupling agent to improve the physical and electrical properties of glass-reinforced and mineral-filled thermosetting resins under exposure to heat and/or moisture. It is typically employed as a blend additive in resin systems that cure via a free radical mechanism and in filled or reinforced thermoplastic polymers, including polyolefins and polyurethanes. It is also used to functionalize resins via radical initiated processes-copolymerization or grafting and to modify surfaces. 收起 | |
| Silane Coupling Agent KH-580 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | 硅烷偶联剂KH-580是一种长链烷基硅烷。它易于溶解于有机溶剂，如烃，醚和酮中。这款产品主要推荐与非有机材料同时使用，如玻璃和硅等。它可以改善与有机物质的混合能力，并赋予产品防水效果，提高产品的机械性能。 | |
| Silane Coupling Agent KH-591 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | Silane Coupling Agent KH-591是一种多功能的巯基官能矽烷，可促进填料如氧化矽和硫交联橡胶之间的黏附力，例如NR、SBR、BR、EPDM等。 | |
| Silane Coupling Agent KH-602 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-602 is a colorless, strongly alkaline liquid with amine smell being very sensitive to hydrolysis. It is a diamino-functional silane capable of providing good adhesion, superior elongation, and flexibility at the polymer-substrate interface. It is used ...展开 KH-602 is a colorless, strongly alkaline liquid with amine smell being very sensitive to hydrolysis. It is a diamino-functional silane capable of providing good adhesion, superior elongation, and flexibility at the polymer-substrate interface. It is used to promote adhesion between glass/mineral and metal surfaces-reinforcements, fillers/substrates-and resins that react with amino groups in systems such as PVC plastisol, polyurethane, or epoxy-based adhesives and sealant, or in phenolic and epoxy molding compounds. Its reduced alkoxy functionality might also be useful in waterborne systems such as latex coatings, adhesives and sealants, providing lower reactivity and therefore higher stability in the aqueous environment. 收起 | |
| Silane Coupling Agent KH-7180 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-7180是一种有两个可水解乙氧基的多用途环氧有机反应硅烷。可以促进附着力，同时贮存期不会泛黄，同时还可以增强乳胶和水性胶粘剂及密封剂配方的物理性能。这款产品推荐用于汽车层压胶黏剂，家具层压胶黏剂以及植绒胶粘剂。 | |
| Silane Coupling Agent KH-792 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-792 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. KH-792 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (co...展开 KH-792 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. KH-792 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker(moisture crosslinking of polymers). The application as coupling agent leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. 收起 | |
| Silane Coupling Agent KH-Si69 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-Si69 is a pale yellow transparent liquid that is soluble in ethanol, acetone, benzene, toluene and other solvents. It is insoluble in water. KH-Si69 silane, is a bifunctional polysulfidic organosilane for the rubber industry defined chemically as Bis(3...展开 KH-Si69 is a pale yellow transparent liquid that is soluble in ethanol, acetone, benzene, toluene and other solvents. It is insoluble in water. KH-Si69 silane, is a bifunctional polysulfidic organosilane for the rubber industry defined chemically as Bis(3-triethoxysilylpropyl)tetrasulfide. It is used to improve the reinforcing capability of fillers with silanol group on their surface, and also as an integral part of curing systems to improve crosslinking network properties. It has crosslinking and accelerator activity in rubber compounds as a silane coupling agent. 收起 | |
| Tetraethoxysilane | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | Tetraethoxysilane is a colorless transparent liquid. It is used as binders in paints and coatings and as silicone room temperature vulcanizing cross-linking agents. It is also used as binders in precision castings and as binders in ceramic. | |
| Titanate Coupling Agent FD-806 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | FD-806是一种以钛为基础的耦合剂。FD-806应用时溶剂会蒸发，乙酰丙酮钛和存在于基质、油墨和涂料材料中的反应基团会发生交联反应形成桥梁。钛酸盐在树脂和基质之间的桥梁作用可以改善印刷油墨和涂料的粘附能力。 | |
| Titanate Coupling Agent FD‐807 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | FD-807是一种以钛为基础的耦合剂。主要用于油漆和打印油墨中，乙酰丙酮钛和存在于基质、油墨和涂料材料中的反应基团会发生交联反应形成桥梁。钛酸盐在树脂和基质之间的桥梁作用可以改善印刷油墨和涂料的粘附能力。 | |
| Titanate Coupling Agent FD-808 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | FD-808是一种以钛为基础的耦合剂。FD-808应用时溶剂会蒸发，-OH，-COOH，-NH2，OCONH2和-SH等基团会发生交联反应从而形成桥梁。桥梁形成会引起分子量增加，从而改善耐热性，耐化学性，耐水性和干燥性能。 | |
| Titanate Coupling Agent FD‐BTP | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | Titanate coupling agent FD‐BTP是一种外观为黄色黏稠液体的聚正丁基钛酸，主要用来作为酯化反应和酯交反应中的交联剂和催化剂，且可用于油漆与涂料工业。 | |
| Titanate Coupling Agent FD-NPT | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | FD-NPT is a pale yellow oil liquid. It is mainly used to manufacture the binder for metal, rubber, and plastic. It is also used as a catalyst in transesterification, esterification reaction, condensation reaction, and as raw material in pharmaceutical Ind...展开 FD-NPT is a pale yellow oil liquid. It is mainly used to manufacture the binder for metal, rubber, and plastic. It is also used as a catalyst in transesterification, esterification reaction, condensation reaction, and as raw material in pharmaceutical Industry. FD-NPT is also used as Ziegler catalyst that has high stereoselectivity in polymerization reaction of polyolefins. 收起 | |
| Titanate Coupling Agent FD-OGT | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | FD-OGT是一种钛酸盐耦合剂。它主要用于优化酯化反应和酯交换反应。它可以抑制副作用，获得高纯度产品。它用于包装密封和医疗仪器，在化学工业中用作耦合剂。它还可以在颜料和涂料产品中用作表面改性添加剂。 | |
| Titanate Coupling Agent FD-TnBT | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | FD-TnBT is a colorless to light yellow liquid. It is mainly used to improve performance of polyester lacquer, and prepare high temperature paint. In cross linking reactions, it can improve adhesion between adhesive and polymer, as well as enhance adhesio...展开 FD-TnBT is a colorless to light yellow liquid. It is mainly used to improve performance of polyester lacquer, and prepare high temperature paint. In cross linking reactions, it can improve adhesion between adhesive and polymer, as well as enhance adhesion of ink to substrate. It is also used as catalyst in rubber synthesis. 收起 | |
| Titanate Coupling Agent FD‐TnPT | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | FD‐TnPT is a tetrabutyl titanate coupling agent. It is mainly used to improve performance of polyester lacquer, and to prepare high temperature paint. In cross-linking reactions, it can improve adhesion between adhesive and polymer and enhance adhesion of...展开 FD‐TnPT is a tetrabutyl titanate coupling agent. It is mainly used to improve performance of polyester lacquer, and to prepare high temperature paint. In cross-linking reactions, it can improve adhesion between adhesive and polymer and enhance adhesion of ink to substrate. It is also used as a catalyst in rubber synthesis. 收起 | |
| Titanate Coupling Agent FD-TPT | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | FD-TPT is a colorless or pale yellowish liquid. It is applied to esterification, transesterification of the esters of acrylic acid etc., and the polymerization reaction of epoxy resin, bakelite, silicone, polybutadiene, PP, PE, and so on. It is used as a ...展开 FD-TPT is a colorless or pale yellowish liquid. It is applied to esterification, transesterification of the esters of acrylic acid etc., and the polymerization reaction of epoxy resin, bakelite, silicone, polybutadiene, PP, PE, and so on. It is used as a crosslinking agent for various polymers or resins in coating and paint. It improves adhesive bonding between coating and substrate as well as improves dispersion, coloring, and anti-corrosion. It is also used as surface modifier, adhesion promoter, and additive for paraffin and oil. 收起 | |
| Titanate Coupling Agent HW-101 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | HW-101 is a claret transparent thick liquid. It is used as a substrate resin for PE, PP, PS, P, AS, ABS, PVC, SBS, polyester, polyether, polyurethane, polyamide, polycarbonates, and other thermoplastic, thermosetting resins plus elastic bodies. It can als...展开 HW-101 is a claret transparent thick liquid. It is used as a substrate resin for PE, PP, PS, P, AS, ABS, PVC, SBS, polyester, polyether, polyurethane, polyamide, polycarbonates, and other thermoplastic, thermosetting resins plus elastic bodies. It can also be used as inorganic fillers for CaCO3, MgCO3, BaSO4, CaSO4, MgO, Al(OH)3, talcum powder, mica powder, titanium pigment, wollastonite powder, carbon black, iron red, chrome yellow, antimony trioxide, ammonium polyphosphate, and barium metaborate. 收起 | |
| Titanate Coupling Agent HW‐102 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | Titanate Coupling Agent HW‐102是一种外观为黄色透明黏稠液体的异丙基三（二辛基磷酸酯）钛酸酯，适合用于基板树酯如PE、PP、PS、P、AS、ABS、PVC、SBS、聚酯、聚醚、聚氨酯、聚胺、聚碳酸酯等和其它热塑性塑胶、热固型树脂及弹性体。本产品也可应用于无机填料如CaCO3、MgCO3、BaSO4、CaSO4、MgO、Al(OH)3、滑石粉、云母粉、钛白粉、矽灰石粉、炭黑、铁红、铬黄、三氧化锑、聚磷酸铵及偏硼酸钡。 | |
| Titanate Coupling Agent HW-201 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | HW-201 is a yellow transparent thick liquid. It is used as a substrate resin for PE, PP, PS, P, AS, ABS, PVC, SBS, polyester, polyether, polyurethane, polyamide, polycarbonates, and other thermoplastic, thermosetting resins plus elastic bodies. It is solu...展开 HW-201 is a yellow transparent thick liquid. It is used as a substrate resin for PE, PP, PS, P, AS, ABS, PVC, SBS, polyester, polyether, polyurethane, polyamide, polycarbonates, and other thermoplastic, thermosetting resins plus elastic bodies. It is soluble in isopropyl alcohol, xylene, toluene, mineral oil, making hydrolytic precipitation in water, innocuous non-corroding liquid, lethal dose for litter white rat being consistent with semi polar material. 收起 | |
| Titanate FD-IAM | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | Titanate FD-IAM是一种特别为印艺与油墨工业而研发的新型钛酸盐。此新的钛基复合磷盐酸有助于克服一些经鉴定的效能问题，且其具有以下特点：溶剂型印刷油墨中有良好的稳定性、良好的附着促进性和交联性能可加强耐水性、耐溶剂性和耐热性，固化期间反应性高，低或无色变，且及不释放乙酰丙酮。 | |
| Trifluoropropylmethyldiethoxysilane KH-1002 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-1002是一种甲基(3,3,3-三氟丙基)二乙氧基硅烷。它以无色液体形式供货，分子量为230.30。 | |
| Zironate Coupling Agent FD‐NPZ | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | Zironate Coupling Agent FD‐NPZ可与螯合剂反应并构成具有较低反应性的相应锆酸盐螯化物，以满足特定的反应性要求。 FD‐NPZ是一种路易斯酸，且可作为大多数反应中的良好催化剂，如酯化、酯交反应、缩合反应等，其亦可作为聚丙烯和聚乙烯聚合作用中的齐格勒－纳他催化剂。由于FD-NPZ的高反应性，它可以在基体和涂层上与有低反应性的黏合剂树脂官能团反应，如-OH和-COOH。在高温(>350 ℃) 的状况下，FD‐NPZ 会分解形成二氧化锆(氧化锆)，并在不同基材上形成薄层(玻璃、矿物、颜...展开 Zironate Coupling Agent FD‐NPZ可与螯合剂反应并构成具有较低反应性的相应锆酸盐螯化物，以满足特定的反应性要求。 FD‐NPZ是一种路易斯酸，且可作为大多数反应中的良好催化剂，如酯化、酯交反应、缩合反应等，其亦可作为聚丙烯和聚乙烯聚合作用中的齐格勒－纳他催化剂。由于FD-NPZ的高反应性，它可以在基体和涂层上与有低反应性的黏合剂树脂官能团反应，如-OH和-COOH。在高温(>350 ℃) 的状况下，FD‐NPZ 会分解形成二氧化锆(氧化锆)，并在不同基材上形成薄层(玻璃、矿物、颜料、金属)，同时提高表面硬度和活性。 FD‐NPZ的化学性质与四正丙基钛酸酯非常相似，但锆酸不会导致变黄的问题。 收起 |
