| ACRIBEN RF 450 | Benasedo | ACRIBEN RF 450 is a low hydroxyl content binder suitable to be crosslinked both with aliphatic and aromatic isocyanates, when producing enamels for metals or for plastic substrates, to be cured at room temperature or in the oven. | |
| ACRIBEN SA 338 | Benasedo | ACRIBEN SA 338 is a self crosslinking acrylic polymer endowed with very good transparency, good chemical resistance, and non-yellowing properties. It is suitable to formulate fast drying clear and pigmented water based top-coats for furniture. | |
| ACRIBEN SA 437 | Benasedo | ACRIBEN SA 437 is a self crosslinking acrylic polymer. It is suitable to formulate fast drying clear and pigmented water based sealers for furniture. | |
| ACRIBEN SA 5302 | Benasedo | ACRIBEN SA 5302 is a self crosslinking acrylic polymer endowed with high blocking resistance, good early water resistance, good alkaline resistance, very good transparency, and non yellowing properties. It is suitable to formulate clear and pigmented fast...展开 ACRIBEN SA 5302 is a self crosslinking acrylic polymer endowed with high blocking resistance, good early water resistance, good alkaline resistance, very good transparency, and non yellowing properties. It is suitable to formulate clear and pigmented fast drying and fast blocking resistant coatings for Joinery, suitable both for interior and exterior applications. 收起 | |
| Advantage™ AM1512A | Ashland | Advantage™ AM1512A is a 100% active foam control agent designed specifically for use in water-based paint systems. It is a high efficiency, hydrocarbon oil-based antifoaming agent and is formulated to control foam at any point during manufacture, packagin...展开 Advantage™ AM1512A is a 100% active foam control agent designed specifically for use in water-based paint systems. It is a high efficiency, hydrocarbon oil-based antifoaming agent and is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH and it is effective in the presence of many surfactants. Advantage™ AM1512A foam control agent is readily dispersible, has an outstanding long-term foam control persistency, and Advantage™ AW8176 defoamer is readily dispersible, has very good long-term persistency, and it is recommended for architectural paints, emulsions plasters, pigment/filler slurries, as well as industrial wood coatings. 收起 | |
| Aquaflow™ NHS-300 | Ashland | Aquaflow™ NHS-300 is a rheology modifier for waterborne architectural coatings. A solvent-free, nonionic associative polymer solution designed to increase high-shear viscosity and provide superior flow and leveling in latex paints. | |
| Aquaflow™ NHS-350 | Ashland | Aquaflow™ NHS-350 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. | |
| Aquaflow™ NHS-355 | Ashland | Aquaflow™ NHS-355 rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development...展开 Aquaflow™ NHS-355 rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build, and favorable brush drag. As an APEO-free and solvent-free product, Aquaflow™ NHS-355 rheology modifier is recommended for low VOC formulations. It is supplied as a low viscosity liquid for ease of handling. The performance of the product is independent of paint pH 收起 | |
| Aquaflow™ NHS-360 | Ashland | Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings, and is compatible with most modern latex resin systems and all sheens. This thickener prov...展开 Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings, and is compatible with most modern latex resin systems and all sheens. This thickener provides highly efficient ICI viscosity development, excellent film build, optimal flow and leveling and favorable brush drag. 收起 | |
| Aquaflow™ NLS-200 | Ashland | Aquaflow™ NLS-200 is a rheology modifier for waterborne architectural coatings. A nonionic associative polymer solution designed to build stormer viscosity and provide superior flow and leveling in latex paints. | |
| Aquaflow™ NLS-210 | Ashland | Aquaflow™ NLS-210 is a nonionic associative polymer solution designed to increase Stormer consistency and provide superior flow and leveling in waterborne paints and coatings. | |
| Aquaflow™ NLS-220 | Ashland | Aquaflow™ NLS-220 is a solvent free nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. It can be used with a wide variety of binder chemistries including v...展开 Aquaflow™ NLS-220 is a solvent free nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. It can be used with a wide variety of binder chemistries including vinyl acrylics, ethylene vinyl acetates, alkyd emulsions and in particular pure acrylics and styrene acrylics. It rapidly equilibrates to target low- or mid-shear viscosity with no negative impact on gloss or color stability. 收起 | |
| Aquaflow™ NMS-450 | Ashland | Aquaflow™ NMS-450 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. | |
| Aquaflow™ NMS-460E | Ashland | Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of S...展开 Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of Stormer (KU) viscosity along with high-shear (ICI) viscosity, and thus can be considered a mid-shear effective thickener that can function as the sole thickener in many paint formulation based on hydrophobic resins, such as acrylics and styrene acrylics. With more hydrophilic resins, such as vinyl acetate ethylene (VAE), optimized rheology may be achieved with Aquaflow™ NMS-460E rheology modifier alone or in combination with a supplemental KU driver. 收起 | |
| Aquaflow™ XLS-500 | Ashland | Aquaflow™ XLS-500 is non-ionic synthetic associative rheology modifier for low-VOC acrylic based paints & coatings. | |
| Aquaflow™ XLS-525 | Ashland | Aquaflow™ XLS-525 is a non-ionic synthetic associative rheology modifier for low-VOC paints and coatings. | |
| Aquaflow™ XLS-530 | Ashland | Aquaflow™ XLS-530 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. | |
| AT-152 | Antex Chemicals (Zhongshan) Limited | AT-152 is a high-performance modified acrylic polymer that appears as a milky, white liquid. This product is an alkali swellable associate urethane thickener emulsion that can be used as a co-thickener in thickening applications where reduction in sag is ...展开 AT-152 is a high-performance modified acrylic polymer that appears as a milky, white liquid. This product is an alkali swellable associate urethane thickener emulsion that can be used as a co-thickener in thickening applications where reduction in sag is desired, particularly in paint, pigment printing and paper printing applications. 收起 | |
| AT-166 | Antex Chemicals (Zhongshan) Limited | AT-166 is an acid-containing, modified acrylic polymer with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coatings, pigment printing, and adhesive reformation indus...展开 AT-166 is an acid-containing, modified acrylic polymer with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coatings, pigment printing, and adhesive reformation industries. 收起 | |
| AT-288 | Antex Chemicals (Zhongshan) Limited | AT-288 is an acid-containing, all acrylic copolymer emulsion with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coating, pigment printing, and adhesive reformation ...展开 AT-288 is an acid-containing, all acrylic copolymer emulsion with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coating, pigment printing, and adhesive reformation industries. 收起 | |
| AT-3000 | Antex Chemicals (Zhongshan) Limited | AT-3000 is a styrene acrylic copolymer emulsion that appears as a milky, white liquid, and has excellent water resistance, alkali resistance, and compatibility with cement and calcium ion stability. This product can be used for making electrometric skim c...展开 AT-3000 is a styrene acrylic copolymer emulsion that appears as a milky, white liquid, and has excellent water resistance, alkali resistance, and compatibility with cement and calcium ion stability. This product can be used for making electrometric skim coating applications. 收起 | |
| AT-3000M | Antex Chemicals (Zhongshan) Limited | AT-3000M is a styrene acrylic copolymer emulsion that appears as a milky, white liquid, and has good water and alkali resistance characteristics. This product is designed for making water proof membrane for roof tops and basements, electrometric skim coat...展开 AT-3000M is a styrene acrylic copolymer emulsion that appears as a milky, white liquid, and has good water and alkali resistance characteristics. This product is designed for making water proof membrane for roof tops and basements, electrometric skim coatings, and as a primer for cement walls. 收起 | |
| AT-3066 | Antex Chemicals (Zhongshan) Limited | AT-3066 is an all acrylic copolymer that appears as a translucent liquid, and has good adhesion and excellent water and yellowing resistance. This product can be used for making top coat for stone paint. | |
| AT-3099 | Antex Chemicals (Zhongshan) Limited | AT-3099 is an all-acrylic copolymer that appears as a milky, white liquid, and features excellent alkaline resistance, wet scrub resistance, and water resistance. This product is designed for making high performance exterior gloss and flat paint. | |
| AT-3128 | Antex Chemicals (Zhongshan) Limited | AT-3128 is an acrylic copolymer that appears as a milky, white liquid with superb water resistance. This product can be used for metal coating, demonstrating excellent performance in adhesion. | |
| AT-3150 | Antex Chemicals (Zhongshan) Limited | AT-3150 is a vinyl acrylic copolymer emulsion that appears as a milky, white liquid, and features good alkaline resistance, water resistance and good scrub resistance. This product can be used for making high performance interior paint. | |
| AT-3200 | Antex Chemicals (Zhongshan) Limited | AT-3200 is an all acrylic copolymer that appears as a milky, white liquid. This product has resistance to water, chemical, and alkali, and can be used in metal coatings. | |
| AT-3298 | Antex Chemicals (Zhongshan) Limited | AT-3298 is a styrene acrylic copolymer emulsion that appears as a milky, white liquid, and has excellent long term durability. This product can be used in high quality exterior house paints. | |
| AT-3345 | Antex Chemicals (Zhongshan) Limited | AT-3345 is a styrene acrylic copolymer that appears as a milky, white liquid, and has a very fine particle size. This product exhibits excellent penetration into cement substrates and can be used for exterior and interior wall applications. | |
| AT-3356 | Antex Chemicals (Zhongshan) Limited | AT-3356 is a modified acrylic copolymer that is a translucent liquid with strong infiltration, excellent adhesion, outstanding water resistance, excellent alkali and salt resistance properties. This product is often used in colored paint and outside speci...展开 AT-3356 is a modified acrylic copolymer that is a translucent liquid with strong infiltration, excellent adhesion, outstanding water resistance, excellent alkali and salt resistance properties. This product is often used in colored paint and outside special primer. 收起 | |
| AT-3413 | Antex Chemicals (Zhongshan) Limited | AT-3413 is a styrene acrylic copolymer emulsion that appears as a milky, white liquid. This product features good compatibility with cement and insulation materials, and can be used in interior and exterior EIFS systems. | |
| AT-3430 | Antex Chemicals (Zhongshan) Limited | AT-3430 is a veova acrylic copolymer emulsion that appears as a milky, white liquid and features excellent wear, water, alkali, and dirt pick-up resistance. This product features excellent durability, chemical, blush, and salt spray resistance, and high g...展开 AT-3430 is a veova acrylic copolymer emulsion that appears as a milky, white liquid and features excellent wear, water, alkali, and dirt pick-up resistance. This product features excellent durability, chemical, blush, and salt spray resistance, and high gloss. It can be used to make metal coatings and floor paints. 收起 | |
| AT-3487M | Antex Chemicals (Zhongshan) Limited | AT-3487M is a styrene acrylic copolymer emulsion that appears as a semi-transparent liquid, and features excellent water, alkali, and scrub resistance. This product can be used to make general purpose and cost-effective exterior and interior emulsion pain...展开 AT-3487M is a styrene acrylic copolymer emulsion that appears as a semi-transparent liquid, and features excellent water, alkali, and scrub resistance. This product can be used to make general purpose and cost-effective exterior and interior emulsion paints. 收起 | |
| AT-3558 | Antex Chemicals (Zhongshan) Limited | AT-3558 is a vinyl veova copolymer emulsion that appears as a milky, white liquid. This product can be used in interior aesthetic paint applications. | |
| AT-3875MX | Antex Chemicals (Zhongshan) Limited | AT-3875MX is a styrene acrylic copolymer emulsion that appears as a milky, white liquid, and features excellent water and alkali resistance. This product can be used in compendious membrane for water proofing for roof tops, swimming pools, and basements. | |
| AT-6256 | Antex Chemicals (Zhongshan) Limited | AT-6256 is a self cross-linking, all-acrylic copolymer that appears as a milky, white liquid. This product can be used as a flocking adhesive for cotton and nylon substrates, and exhibits soft handfeel, good scrubbing resistance and low formaldehyde. | |
| AT-6258 | Antex Chemicals (Zhongshan) Limited | AT-6258 is a self cross-linking all-acrylic copolymer that appears as a milky, white liquid. This product can be used as a flocking adhesive for cotton and nylon substrates, and exhibits soft handfeel, good scrubbing resistance, and low formaldehyde. | |
| AT-6806A | Antex Chemicals (Zhongshan) Limited | AT-6806A is a styrene acrylic copolymer emulsion that appears as a milky, white liquid. This product has high glass transition temperature and good mechanical stability properties. It can be used in coatings and exhibit good resilience and hard hand-feel. | |
| AT-6821A | Antex Chemicals (Zhongshan) Limited | AT-6821A is a styrene acrylic copolymer that appears as a milky, white liquid, and features good adhesion to various substrates. This product can be used for its good water resistance, good hand-feel and fullness. | |
| AT-6854 | Antex Chemicals (Zhongshan) Limited | AT-6854 is a self-cross linking styrene acrylic copolymer emulsion that appears as a milky, white liquid. This product can be used as the back coating for long-pile fabrics, and can provide superb hand-feel and adhesion. | |
| AT-6890A | Antex Chemicals (Zhongshan) Limited | AT-6890A is a self-cross linking all acrylic copolymer emulsion with medium low gloss transaction temperature, good fabric penetration, and good mechanical stability. This product appears as a milky white liquid, and it can be used for non-woven coating a...展开 AT-6890A is a self-cross linking all acrylic copolymer emulsion with medium low gloss transaction temperature, good fabric penetration, and good mechanical stability. This product appears as a milky white liquid, and it can be used for non-woven coating and binding applications. 收起 | |
| AT-68A | Antex Chemicals (Zhongshan) Limited | AT-68A is a styrene acrylic copolymer emulsion that appears as a milky white with blue liquid. This product has excellent water resistance, scrub resistance, good adhesion to substrates, and is APEO free. It is often used for making general purpose and co...展开 AT-68A is a styrene acrylic copolymer emulsion that appears as a milky white with blue liquid. This product has excellent water resistance, scrub resistance, good adhesion to substrates, and is APEO free. It is often used for making general purpose and cost effective exterior and interior emulsion paint. 收起 | |
| AT-6959A | Antex Chemicals (Zhongshan) Limited | AT-6959A is a self cross-linking all acrylic emulsion that appears as a milky, white liquid with low film-forming temperature and good mechanical stability. This product can be used for electrostatic flocking adhesive and non-woven coating applications. | |
| AT-7105M | Antex Chemicals (Zhongshan) Limited | AT-7105M is a vinyl acetate homopolymer emulsion that appears as a milky, white viscous liquid. This product is APEO-free and can be used in adhesive applications. | |
| AT-7288 | Antex Chemicals (Zhongshan) Limited | AT-7288 is a self-cross linking vinyl acrylic copolymer emulsion that appears as a milky, white liquid with excellent adhesion properties. This product is specially designed for lamination in adhesive applications. | |
| AT-7630 | Antex Chemicals (Zhongshan) Limited | AT-7630 is a vinyl acetate homopolymer emulsion that appears as a milky, white viscous liquid. This product can be used as a general purpose adhesive completed with flame retardant agent for different substrates. | |
| AT-GAM | Antex Chemicals (Zhongshan) Limited | AT-GAM is an all-acrylic copolymer that appears as a milky, white liquid. This product can be used in the thermal-printing process to provide excellent soft hand-feel, washing and dry-cleaning fastness. | |
| BENALAC 5660 | Benasedo | BENALAC 5660 is an air-dryng long-oil alkyd resin specially designed for “off-set inks”. It is endowed with good setting and drying characteristics, excellent wetting power, colour development and scuff resistance, flow and non- yellowing properties. | |
| BENALAC UR 81 | Benasedo | BENALAC UR 81 is a solventless aromatic urethane modified oil endowed with fast air drying properties, hardness and gloss. It finds applications as a vehicle in “off set“ inks by reducing the tack-free time and improving levelling and rub test resistance....展开 BENALAC UR 81 is a solventless aromatic urethane modified oil endowed with fast air drying properties, hardness and gloss. It finds applications as a vehicle in “off set“ inks by reducing the tack-free time and improving levelling and rub test resistance. Due to its excellent pigments wetting properties is particularly suitable as grinding vehicle. It is also suitable for interior and exterior clear varnishes and for wood stains in compliance with CE 2004 – 42 requirements for the VOC reduction. 收起 | |
| Benasol 1804 | Benasedo | Benasol 1804 is a Linseed - Tung Phenolic oil, with a 68% oil content. It contains 70% solids, Z1-Z2 visc. [G.H], 6-12 A.V. solids, and a 9 color [G.H.] max. It is used in anticorrosive primers, enamels and clear finishes with excellent resistance to mari...展开 Benasol 1804 is a Linseed - Tung Phenolic oil, with a 68% oil content. It contains 70% solids, Z1-Z2 visc. [G.H], 6-12 A.V. solids, and a 9 color [G.H.] max. It is used in anticorrosive primers, enamels and clear finishes with excellent resistance to marine corrosion. 收起 | |
| BENASOL 4377 | Benasedo | BENASOL 4377 is a low viscosity, plasticizing, non yellowing alkyd resin suitable to produce nitrocellulose wood lacquers, endowed with very fast solvent release, high build-up flow, gloss and lifting resistance. | |
| Benasol 4V | Benasedo | Benasol 4V is a very fast air drying alkyd resin phenolic modified having good through dry. It is especially recommended for rust-inhibitive metal and nitrocellulose non lifting primers, fast air–drying enamels for farm and industrial equipment. | |
| Benasol 5097 in White Spirit | Benasedo | Benasol 5097 in White Spirit is used in quick air-drying primers and enamels with excellent chemical and outdoor resistance. It is made from Linseed - Tung Phenolic oil and has an oil content of 42%. This product contains 50% solids, a viscosity [G.H.] of...展开 Benasol 5097 in White Spirit is used in quick air-drying primers and enamels with excellent chemical and outdoor resistance. It is made from Linseed - Tung Phenolic oil and has an oil content of 42%. This product contains 50% solids, a viscosity [G.H.] of X-Z, an A.V. solids amount of 6-15, and a color [G.H] max. of 9. Its application is for air. 收起 | |
| Benasol 5097 in Xylene | Benasedo | Benasol 5097 in Xylene is used in quick air-drying primers and enamels with excellent chemical and outdoor resistance. This product has an oil content of 42%, a solids amount of 50%, an A.V. solids amount of 6-15, and a viscosity [G.H.] of U-W. Its applic...展开 Benasol 5097 in Xylene is used in quick air-drying primers and enamels with excellent chemical and outdoor resistance. This product has an oil content of 42%, a solids amount of 50%, an A.V. solids amount of 6-15, and a viscosity [G.H.] of U-W. Its application is for air. 收起 | |
| BENASOL A 240 | Benasedo | BENASOL A 240 is a very fast curing binder suitable for two pack wood lacquers, sealers and top coats, where it shows good sandability hardness and filling properties. It has excellent lifting resistance and good compatibility with nitrocellulose. | |
| Benasol AS 280 | Benasedo | Benasol AS 280 is used in fast air-drying and low-bake enamels with excellent chemical resistance. It is made from soya oil and has a 28% oil content. It contains 60% solids, has a viscosity [G.H.] of Y-Z1, an A.V. solids amount of 6-15, and a colour [G.H...展开 Benasol AS 280 is used in fast air-drying and low-bake enamels with excellent chemical resistance. It is made from soya oil and has a 28% oil content. It contains 60% solids, has a viscosity [G.H.] of Y-Z1, an A.V. solids amount of 6-15, and a colour [G.H.] maximum of 5. This product has applications for air, bake, nitro and catalyze. 收起 | |
| BENASOL AS 308 in XYLENE | Benasedo | BENASOL AS 308 in XYLENE is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in combination with chlor...展开 BENASOL AS 308 in XYLENE is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in combination with chlorinated rubber, for farm machinery enamels, when sudden outdoor exposure is required. 收起 | |
| BENASOL AS 308 in XYLENE /WHITE SPIRIT (30/15) | Benasedo | BENASOL AS 308 in XYLENE /WHITE SPIRIT (30/15) is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in ...展开 BENASOL AS 308 in XYLENE /WHITE SPIRIT (30/15) is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in combination with chlorinated rubber, for farm machinery enamels, when sudden outdoor exposure is required. 收起 | |
| BENASOL AS 3716 | Benasedo | BENASOL AS 3716 is a non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce high-solids enamels for building and industrial applications, also combining with chlorinated rubber...展开 BENASOL AS 3716 is a non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce high-solids enamels for building and industrial applications, also combining with chlorinated rubber, for farm machinery enamels, when sudden outdoor exposure is required. 收起 | |
| Benasol AS 379 | Benasedo | Benasol AS 379 is used in fast air-drying white and coloured enamels for industrial applications. It is made from special fatty acids with 43% oil content and 60% solids content. This product has a viscosity [G.H.] of Z1-Z2, an A.V. solids amount of 6-12,...展开 Benasol AS 379 is used in fast air-drying white and coloured enamels for industrial applications. It is made from special fatty acids with 43% oil content and 60% solids content. This product has a viscosity [G.H.] of Z1-Z2, an A.V. solids amount of 6-12, and a color [G.H.] maximum of 5. It has application for air. 收起 | |
| BENASOL AS 452 | Benasedo | BENASOL AS 452 is an air-drying low-viscosity, non-yellowing alkyd resin especially modified so to guarantee very good wetting properties with pigments, fillers and wide compatibility with various binder types used in different formulations. | |
| BENASOL AS 453 | Benasedo | BENASOL AS 453 is an air-drying low-viscosity, non-yellowing alkyd resin especially modified so to guarantee very good wetting properties with pigments, fillers and wide compatibility with various binder types used in different formulations. | |
| Benasol B1 | Benasedo | Benasol B1 is used in urethane two-component mat finishes and sealers with high reactivity and easy sandability, and it has nitro and catalyze applications. This product contains vegetable fatty acids, with 30% oil content and a 50% solids amount. It has ...展开 Benasol B1 is used in urethane two-component mat finishes and sealers with high reactivity and easy sandability, and it has nitro and catalyze applications. This product contains vegetable fatty acids, with 30% oil content and a 50% solids amount. It has a viscosity [G.H.] of X-Y, an A.V. solids amount of 6-15, a color [G.H.] max. of 5, and an OH solids of 2.6-2.8%. 收起 | |
| Benasol C 300 | Benasedo | Benasol C 300 is used in non-yellowing baking enamels, polyurethane finishes and nitrocellulose lacquers. It contains coconut fatty acids, with a 33% oil content. This product has a 60% solids content, a viscosity [G.H.] of Z1-Z2, an A.V. solids amount of...展开 Benasol C 300 is used in non-yellowing baking enamels, polyurethane finishes and nitrocellulose lacquers. It contains coconut fatty acids, with a 33% oil content. This product has a 60% solids content, a viscosity [G.H.] of Z1-Z2, an A.V. solids amount of 6-15, and an OH solids of 2.8-3.0%. Benasol C 300 has bake, nitro and catalyze applications. 收起 | |
| BENASOL CO 34 | Benasedo | BENASOL CO 34 is an alkyd resin with a particular molecular structure,endowed with very fast drying properties, good performances in adhesion,hardness and through-dry. It is suggested to formulate industrial sealer and finishes, i.e. machinery,aerosol ena...展开 BENASOL CO 34 is an alkyd resin with a particular molecular structure,endowed with very fast drying properties, good performances in adhesion,hardness and through-dry. It is suggested to formulate industrial sealer and finishes, i.e. machinery,aerosol enamels,traffic-paints. 收起 | |
| Benasol CO 35 in Xylene | Benasedo | Benasol CO 35 in Xylene is used in very fast air-drying enamels for industrial applications and traffic-paints. It is made using soya fatty acids, with a 44% oil content. It has a viscosity [G.H.] of Z2-Z4, a 60% solids amount, an A.V. solids content of 6...展开 Benasol CO 35 in Xylene is used in very fast air-drying enamels for industrial applications and traffic-paints. It is made using soya fatty acids, with a 44% oil content. It has a viscosity [G.H.] of Z2-Z4, a 60% solids amount, an A.V. solids content of 6-15, and a colour [G.H.] of maximum 8. This product has air applications. 收起 | |
| Benasol CO 35 in Xylene/Butylacetate | Benasedo | Benasol CO 35 in Xylene/Butylacetate is used in very fast air-drying enamels for industrial applications and traffic-paints, and also has air applications. It is made using soya fatty acids, with a 44% oil content. It has a viscosity [G.H.] of Z2-Z3, a 65...展开 Benasol CO 35 in Xylene/Butylacetate is used in very fast air-drying enamels for industrial applications and traffic-paints, and also has air applications. It is made using soya fatty acids, with a 44% oil content. It has a viscosity [G.H.] of Z2-Z3, a 65% solids amount, an A.V. solids content of 6-15, and a colour [G.H.] of maximum 4. 收起 | |
| Benasol CO 37 in BUTYL ACETATE | Benasedo | Benasol CO 37 in BUTYL ACETATE is used in very fast non-yellowing air-drying enamels for exterior applications, particularly farm equipment. It is made using special fatty acids and Urethane Aliphatic, and has a 37% oil content. This product contains 65% ...展开 Benasol CO 37 in BUTYL ACETATE is used in very fast non-yellowing air-drying enamels for exterior applications, particularly farm equipment. It is made using special fatty acids and Urethane Aliphatic, and has a 37% oil content. This product contains 65% solids, a viscosity [G.H.] of Z1-Z2, an A.V. solids content of 5-12, and a color [G.H.] maximum of 4. This product has air applications. 收起 | |
| Benasol E 114 | Benasedo | Benasol E 114 is used in clear and pigmented finishes for metals and wood. It has a large compatibility with acrylics, polyesters, alkyds, film-forming vehicles and universal tinting-systems. It contains synthetic fatty acids, with a 25% oil amount. This ...展开 Benasol E 114 is used in clear and pigmented finishes for metals and wood. It has a large compatibility with acrylics, polyesters, alkyds, film-forming vehicles and universal tinting-systems. It contains synthetic fatty acids, with a 25% oil amount. This product has a viscosity [G.H.] of Z3-Z5, a colour max. of 3, an OH solids amount of 5.4-5.6, and solids amount of 75%. Benasol E 114 has bake, nitro, and catalyze applications. 收起 | |
| Benasol E 184 | Benasedo | Benasol E 184 is made using synthetic fatty acids, with an oil content of 28% and a solids amount of 70%. This product has a viscosity [G.H.] of Z1-Z3, an OH solids amount of 2.3-2.5, and a colour [G.H.] maximum of 3. It is used in non-yellowing nitrocell...展开 Benasol E 184 is made using synthetic fatty acids, with an oil content of 28% and a solids amount of 70%. This product has a viscosity [G.H.] of Z1-Z3, an OH solids amount of 2.3-2.5, and a colour [G.H.] maximum of 3. It is used in non-yellowing nitrocellulose lacquers for automotive finishes, bake and two-component polyurethane enamels. Benasol E 184 has bake, nitro and catalyze applications. 收起 | |
| Benasol F 71 | Benasedo | Benasol F 71 is used in two-component polyurethane gloss or mat finishes and sealers endowed with high transparence, and has catalyze applications. This product is made using hydrogenated castor oil and vegetable fatty acids, with an oil content of 41%. T...展开 Benasol F 71 is used in two-component polyurethane gloss or mat finishes and sealers endowed with high transparence, and has catalyze applications. This product is made using hydrogenated castor oil and vegetable fatty acids, with an oil content of 41%. This product has an OH solids amount of 4.4-4.6, an A.V. solids level of 15-20, a colour [G.H.] maximum of 4, and a viscosity of Z1-Z2. 收起 | |
| Benasol F 73 | Benasedo | Benasol F 73 is used in high-quality clear and pigmented polyurethane finishes for wood, and has catalyze applications. It uses hydrogenated castor oil, with a 43% oil and 60% solids content. This product has a 4.5-4.7% OH solids amount, a 15-23 A.V. soli...展开 Benasol F 73 is used in high-quality clear and pigmented polyurethane finishes for wood, and has catalyze applications. It uses hydrogenated castor oil, with a 43% oil and 60% solids content. This product has a 4.5-4.7% OH solids amount, a 15-23 A.V. solids level, and a Y-Z viscosity [G.H.]. 收起 | |
| BENASOL FL 34 | Benasedo | BENASOL FL 34 is a fast air drying long oil alkyd resin, modified with aromatic isocyanate, having a pale colour and giving hard and tough films. It is suggested for clear and pigmented finishes with high gloss, high body, excellent brushability and dryin...展开 BENASOL FL 34 is a fast air drying long oil alkyd resin, modified with aromatic isocyanate, having a pale colour and giving hard and tough films. It is suggested for clear and pigmented finishes with high gloss, high body, excellent brushability and drying. It is employed for silk – glossy paints or flat one-coat wall finishes, pigmented sealers for wood and primers endowed with easy sanding properties and applied by brush or roll. Wide compatibility with medium-long-oil alkyd resins. 收起 | |
| BENASOL FL 40 | Benasedo | BENASOL FL 40 is a non yellowing, slightly thixotropic high-molecular weight alkyd resin, endowed with very good flow, fast drying and wide compatibility with medium-long-oil alkyd resins. In combination with medium-oil alkyd resins, is suitable for seale...展开 BENASOL FL 40 is a non yellowing, slightly thixotropic high-molecular weight alkyd resin, endowed with very good flow, fast drying and wide compatibility with medium-long-oil alkyd resins. In combination with medium-oil alkyd resins, is suitable for sealers, matt and semi-glossy paints employed in building and costruction industries endowed with good outdoor resistance properties. 收起 | |
| Benasol FX 97 | Benasedo | Benasol FX 97 is a new Alkyd Resin with 98% solid content, which allows the formulators to stay below the requested limits. Benasol FX 97 is easy to apply by brush and widely compatible with different types of resins; due to its properties, can be used as...展开 Benasol FX 97 is a new Alkyd Resin with 98% solid content, which allows the formulators to stay below the requested limits. Benasol FX 97 is easy to apply by brush and widely compatible with different types of resins; due to its properties, can be used as grinding vehicle and can be completed with a wide range of Long Oil Alkyd Resins. It is also suggested to improve gloss and build-up of conventional paints. 收起 | |
| Benasol FX66 | Benasedo | Benasol FX66 is used in high performance non-yellowing paints for interior and exterior, for building industry and "do-it-yourself". It provides very good colour retention, and has air applications. This product uses special unsaturated fatty acids, with ...展开 Benasol FX66 is used in high performance non-yellowing paints for interior and exterior, for building industry and "do-it-yourself". It provides very good colour retention, and has air applications. This product uses special unsaturated fatty acids, with a 67% oil and 70% solids content. This product has a colour [G.H.] maximum of 3, an A.V. solids amount of 6-10, and a viscosity [G.H.] of Z1-Z2. 收起 | |
| BENASOL GEL 220 | Benasedo | BENASOL GEL 220 is a soft-gel fast drying thixotropic alkyd resin, endowed with very good flow , body and color ritention. It is employed alone or combined with medium-long oil alkyd resins to formulate enamels, glossy paints, flat one-coat wall finishes ...展开 BENASOL GEL 220 is a soft-gel fast drying thixotropic alkyd resin, endowed with very good flow , body and color ritention. It is employed alone or combined with medium-long oil alkyd resins to formulate enamels, glossy paints, flat one-coat wall finishes or pigmented sealers for wood and “do it Your self”, applied by brush or roller. 收起 | |
| BENASOL HS 120 | Benasedo | BENASOL HS 120 is an air – dryng, non yellowing, long-oil alkyd resin with a particular molecular structure, endowed with fast air drying, good gloss, colour retention, good flow and superficial hardness. It’s easy to apply by brush and it’s widely compat...展开 BENASOL HS 120 is an air – dryng, non yellowing, long-oil alkyd resin with a particular molecular structure, endowed with fast air drying, good gloss, colour retention, good flow and superficial hardness. It’s easy to apply by brush and it’s widely compatible with different types of resins, showing excellent wetting properties. Due to its properties, can be used as grinding vehicle and to produce tinting pastes. It is also suggested to improve gloss and build-up of conventional paints. 收起 | |
| BENASOL HS 6922 | Benasedo | BENASOL HS 6922 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured ...展开 BENASOL HS 6922 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. 收起 | |
| BENASOL HS 7100 | Benasedo | BENASOL HS 7100 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured ...展开 BENASOL HS 7100 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. 收起 | |
| BENASOL HS 7380 | Benasedo | BENASOL HS 7380 is a non yellowing alkyd resin with a particular molecular structure, endowed with good air drying, gloss and colour retention. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and f...展开 BENASOL HS 7380 is a non yellowing alkyd resin with a particular molecular structure, endowed with good air drying, gloss and colour retention. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance in compliance with the CE 2004 – 42 requirements for the VOC reduction . 收起 | |
| BENASOL HS 75 | Benasedo | BENASOL HS 75 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness and ease of brush application. It is suggested for white and coloured a...展开 BENASOL HS 75 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness and ease of brush application. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. 收起 | |
| BENASOL HS 753 | Benasedo | BENASOL HS 753 is a non yellowing alkyd resin , endowed with good air drying, gloss and colour retention. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. | |
| Benasol HS 754 | Benasedo | Benasol HS 754 is a non yellowing alkyd resin , endowed with good air drying, gloss and colour retention. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. | |
| BENASOL HS 86 | Benasedo | BENASOL HS 86 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured ai...展开 BENASOL HS 86 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. 收起 | |
| BENASOL L 50 AV | Benasedo | BENASOL L 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combin...展开 BENASOL L 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combination with other alkyd resins. 收起 | |
| BENASOL L 65 | Benasedo | BENASOL L 65 is a long oil, low viscosity alkyd resin,endowed with a very good,trough dryng properties also in thick film, gloss and color retention, hardness,built and brushability. It is suggested for formulating sinthetic enamels, clear and pigmented p...展开 BENASOL L 65 is a long oil, low viscosity alkyd resin,endowed with a very good,trough dryng properties also in thick film, gloss and color retention, hardness,built and brushability. It is suggested for formulating sinthetic enamels, clear and pigmented paints for “ Do it Yourself “ and maintenance, alone or combined with oils urethane modified binders. 收起 | |
| Benasol R 126 | Benasedo | Benasol R 126 is used in polyurethane clear finishes and lacquers for wood and metals, with nitro and catalyze applications. It is made using castor oil, with a 53% oil and 60% solids content. This product has an OH solids amount of 5.4-5.6%, a colour [G....展开 Benasol R 126 is used in polyurethane clear finishes and lacquers for wood and metals, with nitro and catalyze applications. It is made using castor oil, with a 53% oil and 60% solids content. This product has an OH solids amount of 5.4-5.6%, a colour [G.H.] maximum of 5, and a viscosity [G.H.] of X-Y. 收起 | |
| Benasol R 127 | Benasedo | Benasol R 127 is used in polyurethane high build-up clear finishes and lacquers endowed with good adhesion and flexibility for metals and wood. It is made using castor oil, with a 59% oil and 60% solids content. This product has an OH solids amount of 5.2...展开 Benasol R 127 is used in polyurethane high build-up clear finishes and lacquers endowed with good adhesion and flexibility for metals and wood. It is made using castor oil, with a 59% oil and 60% solids content. This product has an OH solids amount of 5.2-5.4%, a colour [G.H.] maximum of 5, a viscosity [G.H.] of W-Y, and an A.V. solids level of 6-15. Benasol R 127 has catalyze and nitro applications. 收起 | |
| BENASOL R 40 D | Benasedo | BENASOL R 40 D is an alkyd resin having good properties of adhesion and flexibility, gloss and colour retention, build – up and flow. It is suitable to produce low temperature bake enamels crosslinked with amino resins. BENASOL R 40 D is also suggested to...展开 BENASOL R 40 D is an alkyd resin having good properties of adhesion and flexibility, gloss and colour retention, build – up and flow. It is suitable to produce low temperature bake enamels crosslinked with amino resins. BENASOL R 40 D is also suggested to formulate clear and pigmented acid- curing coatings and nitrocellulose lacquers. 收起 | |
| Benasol RC 45 | Benasedo | Benasol RC 45 is used in polyurethane sealers and mat finishes for wood as well as for nitrocellulose lacquers, and can be used in bake, nitro and catalyze applications. This product uses castor and vegetable fatty acids oil, with a 41% oil and 60% solids...展开 Benasol RC 45 is used in polyurethane sealers and mat finishes for wood as well as for nitrocellulose lacquers, and can be used in bake, nitro and catalyze applications. This product uses castor and vegetable fatty acids oil, with a 41% oil and 60% solids content. Benasol RC 45 as a viscosity [G.H.] of Z1-Z3, an A.V. solids amount of 6-15, and an OH solids level of 4.2-4.4%. 收起 | |
| Benasol RC 75 | Benasedo | Benasol RC 75 is used in high-gloss polyurethane finishes and vehicles to improve the general performances of wood systems, with nitro and catalyze applications. It uses castor oil type, with a 78% oil and 80% solids content. This product has an OH solids...展开 Benasol RC 75 is used in high-gloss polyurethane finishes and vehicles to improve the general performances of wood systems, with nitro and catalyze applications. It uses castor oil type, with a 78% oil and 80% solids content. This product has an OH solids amount of 5.8-6.0%, an A.V. solids amount of 6-10, a colour [G.H.] maximum 5, and a viscosity [G.H.] of X-Y. 收起 | |
| Benasol RT 43 | Benasedo | Benasol RT 43 is a vehicle to be used alone or combined with other Benasol for polyurethane sealers or mat finishes. It is endowed with high-body and fast drying, and has catalyze applications. This product contains castor and Talloil, with a 43% oil and ...展开 Benasol RT 43 is a vehicle to be used alone or combined with other Benasol for polyurethane sealers or mat finishes. It is endowed with high-body and fast drying, and has catalyze applications. This product contains castor and Talloil, with a 43% oil and 60% solids amount. It has a viscosity [G.H.] of Z1-Z2, an A.V. solids amount of 6-15, a color [ G.H.] maximum of 6, and an OH solids levle of 4.0-4.2%. 收起 | |
| BENASOL S 50 | Benasedo | BENASOL S 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combin...展开 BENASOL S 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combination with other alkyd resins. 收起 | |
| BENASOL S 60 | Benasedo | BENASOL S 60 s an air - drying alkyd resin showing high wetting power and large compatibility with pigments; it provides good gloss and flow, colour retention, exterior durability and excellent brushability. It is suitable for making white or light shades...展开 BENASOL S 60 s an air - drying alkyd resin showing high wetting power and large compatibility with pigments; it provides good gloss and flow, colour retention, exterior durability and excellent brushability. It is suitable for making white or light shades architectural enamels for interior and exterior, as well as for marine paints. 收起 | |
| BENASOL SI 25 | Benasedo | BENASOL SI 25 is a hydroxylated non–drying alkid resin for two components polyurethane topcoats endowed with excellent hardeness, build-up, solvent resistance and very good hadesion and flexibility. It is particularly suggested for formulating clear and p...展开 BENASOL SI 25 is a hydroxylated non–drying alkid resin for two components polyurethane topcoats endowed with excellent hardeness, build-up, solvent resistance and very good hadesion and flexibility. It is particularly suggested for formulating clear and pigmented topcoats for wood forniture with high characteristics of mar resistance and high glossy also after polishing , applied in very fast curing cycle by courtain coating or spray. 收起 | |
| BENASOL SI 32 | Benasedo | BENASOL SI 32 is an hydroxylated alkyd resin, endowed with good build–up, easy sandability, high reactivity and good chemical resistances. It is suggested for formulating fast drying glossy two components topcoats both for spray or curtain coating, easy t...展开 BENASOL SI 32 is an hydroxylated alkyd resin, endowed with good build–up, easy sandability, high reactivity and good chemical resistances. It is suggested for formulating fast drying glossy two components topcoats both for spray or curtain coating, easy to be polished and piled in a very short time. It’s especially recommended for wood coating applications 收起 | |
| BENASOL SI 83 | Benasedo | BENASOL SI 83 is an air – dryng, non yellowing, long-oil alkyd resin with a particular molecular structure, endowed with fast air drying, good gloss, colour retention, good flow and superficial hardness. It’s easy to apply by brush and it’s widely compati...展开 BENASOL SI 83 is an air – dryng, non yellowing, long-oil alkyd resin with a particular molecular structure, endowed with fast air drying, good gloss, colour retention, good flow and superficial hardness. It’s easy to apply by brush and it’s widely compatible with different types of resins, showing excellent wetting properties. Due to its properties, it can be used as grinding vehicle and to produce tinting pastes. It is also suggested to improve gloss and build-up of conventional paints. 收起 | |
| Benasol T 35 | Benasedo | Benasol T 35 is used in general industrial baking enamels and hammer bake coatings, and it has nitro and bake applications. This product uses Talloil, with a 35% oil and 50% solids content. This product has a viscosity [G.H.] of Z1-Z3, an A.V. solids leve...展开 Benasol T 35 is used in general industrial baking enamels and hammer bake coatings, and it has nitro and bake applications. This product uses Talloil, with a 35% oil and 50% solids content. This product has a viscosity [G.H.] of Z1-Z3, an A.V. solids level of 6-15, and an OH solids amount of 4.5-4.7%. 收起 | |
| Benasol T 68 | Benasedo | Benasol T 68 is used in high-solids enamels for building industry and in clear finishes and impregnating vehicles for wood, and has air applications. This product uses Talloil, with a 68% oil and 75% solids amount. It has a colour [G.H.] maximum of 9, an ...展开 Benasol T 68 is used in high-solids enamels for building industry and in clear finishes and impregnating vehicles for wood, and has air applications. This product uses Talloil, with a 68% oil and 75% solids amount. It has a colour [G.H.] maximum of 9, an A.V. solids level of 6-15, and a viscosity [G.H.] of Z-Z1. 收起 |
