UL Prospector

成功!

成功保存搜索结果
Acetone TOP Solvent Company Limited Acetone, also known as 2-propanone or dimethyl ketone (DMK), is a colorless, low boiling, easy pouring liquid with a distinguishing odor. It is miscible in all proportions with water, alcohols, many hydrocarbons and other organic liquids. It has solvent p...展开 Acetone, also known as 2-propanone or dimethyl ketone (DMK), is a colorless, low boiling, easy pouring liquid with a distinguishing odor. It is miscible in all proportions with water, alcohols, many hydrocarbons and other organic liquids. It has solvent properties for vegetable and animal fats, cellulose, natural and synthetic resins and many other organic substances. The primary use for this product is in printing inks, adhesives, paints and coatings. 收起
Alcotex 359B Synthomer Alcotex 359B is a partially hydrolysed polyvinyl acetate. This product has a total solids content of 25-27% and a viscosity of less than 2500 mPa.s. Alcotex 359B is most commonly used in ink jet receivable paper and film coating applications.
Alcotex 864 Synthomer Alcotex 864 is a polyvinyl alcohol, internally plasticized and supplied in a water solution. This product has a total solids content of 34-36% and a viscosity of 3-5 mPa.s. Alcotex 864 is most commonly used in water-soluble film, in jet receivable paper...展开 Alcotex 864 is a polyvinyl alcohol, internally plasticized and supplied in a water solution. This product has a total solids content of 34-36% and a viscosity of 3-5 mPa.s. Alcotex 864 is most commonly used in water-soluble film, in jet receivable paper and film coating, and temporary adhesive applications. 收起
Alcotex 975 Synthomer Alcotex 975 is an internally plasticized polyvinyl alcohol supplied in a solvent system of water and propan-1-ol. This product has a total solid content of 34-36% and a viscosity of 4.5-5.5 mPa.s. Alcotex 975 is most commonly used in water-soluble film,...展开 Alcotex 975 is an internally plasticized polyvinyl alcohol supplied in a solvent system of water and propan-1-ol. This product has a total solid content of 34-36% and a viscosity of 4.5-5.5 mPa.s. Alcotex 975 is most commonly used in water-soluble film, ink jet receivable paper and film coating, and temporary adhesive applications. 收起
Butyl Glycol Ether (BGE) TOP Solvent Company Limited Butyl Glycol Ether (BGE) is a colorless, slight smelling liquid with a high boiling point. This product has small hygroscopic properties and is miscible with water at room temperature. This liquid solution is also miscible with several different oxygenate...展开 Butyl Glycol Ether (BGE) is a colorless, slight smelling liquid with a high boiling point. This product has small hygroscopic properties and is miscible with water at room temperature. This liquid solution is also miscible with several different oxygenated solvents, as well as with aliphatic and aromatic hydrocarbons and oils. It is solvent for many natural and synthetic resins, nitrocellulose and ethyl cellulose. Butyl Glycol Either (BGE) is primarily used as a solvent in printing inks, paints and coatings. 收起
Emultex 4030 Synthomer Emultex 4030 is an APEO-free vinyl acetate acrylic polymer dispersion with medium particle size. This product has a total solids content of 53-55% and a viscosity of 800-2500 cPs. Emultex 4030 is most commonly used as a binder in interior and general purp...展开 Emultex 4030 is an APEO-free vinyl acetate acrylic polymer dispersion with medium particle size. This product has a total solids content of 53-55% and a viscosity of 800-2500 cPs. Emultex 4030 is most commonly used as a binder in interior and general purpose matte paint manufacturing applications. 收起
Emultex 518 Synthomer Emultex 518 is a polyvinyl alcohol stabilized vinyl acetate homopolymer dispersion. This product has been designed specifically for use in the building industry as a general purpose bonding agent, a concrete and cement additive, and as a general purpose a...展开 Emultex 518 is a polyvinyl alcohol stabilized vinyl acetate homopolymer dispersion. This product has been designed specifically for use in the building industry as a general purpose bonding agent, a concrete and cement additive, and as a general purpose adhesive. 收起
Emultex 5192 Synthomer Emultex 5192 is a polyvinyl alcohol stabilized vinyl acetate homopolymer dispersion. This product is most commonly used as a base dispersion in packaging, paper, board, and wood adhesive applications.
Emultex FR 728 Synthomer Emultex FR 728 is a vinyl acetate/VeoVa10 copolymer dispersion for intumescent paints. This product has a total solids content of 50% and a viscosity 2250 mPa.s. Emultex 728 is most commonly used in intumescent paint applications.
Emultex FR 737 Synthomer Emultex FR 737 is a vinyl acetate/VeoVa10/acrylate copolymer dispersion. This product has a total solids content of 55% and a viscosity of 1000 mPa.s. Emultex FR 737 is most commonly used in intumescent paint applications.
Emultex FR 747 Synthomer Emultex FR 747 is a stabilized vinyl acetate/VeoVa10/acrylate copolymer dispersion. This product has a total solids content of 55% and a viscosity of 1000 mPa.s. Emultex FR 747 is most commonly used in intumescent paint applications.
Emultex FR 797 Synthomer Emultex FR 797 is a vinyl acetate/VeoVa10/acrylate copolymer dispersion. This product has a total solids content of 55% and a viscosity of 1100 mPa.s. Emultex FR 797 is most commonly used in intumescent paint applications.
Emultex KR37 Synthomer Emultex KR37 is a vinyl acetate homopolymer stabilized with polyvinyl alcohol and surfactants. This product is most commonly used as a base in adhesive manufacturing applications.
Emultex VV 665 Synthomer Emultex VV 665 is a vinyl acetate/VeoVa10/acrylate copolymer dispersion. This product has a total solids content of 57% and a viscosity of 2250 mPa.s. Emultex VV 665 is most commonly used in solvent-free matte and silk paint applications.
Emultex VV 673 Synthomer Emultex VV 673 is a vinyl acetate/VeoVa10/acrylate copolymer dispersion. This product has a total solids content of 55% and a viscosity of 1000 mPa.s. Emultex VV 673 is most commonly used in matte, masonry, and silk paint applications.
Emultex VV 675 Synthomer Emultex VV 675 is a vinyl acetate/VeoVa10/acrylate copolymer dispersion. This product has a total solids content of 55% and a viscosity of 700 mPa.s. Emultex VV 675 is most commonly used in exterior masonry and interior wall paint applications.
Emultex VV 676 Synthomer Emultex VV 676 is a vinyl acetate/VeoVa10/acrylate copolymer dispersion. This product has a total solids content of 55% and a viscosity of 1100 mPa.s. Emultex VV 676 is most commonly used in exterior masonry and interior wall paint applications.
Emultex VV 679 Synthomer Emultex VV 679 is a vinyl acetate/VeoVa10 copolymer dispersion. This product is most commonly used to provide gloss and scrub resistance in matte and silk wall paint, ready-mix filler, and ceramic tile adhesive applications.
Ethyl Acetate (EA) TOP Solvent Company Limited Ethyl acetate (EA) is a neutral colorless liquid with a pleasantly fruity odor. Ethyl acetate is primarily used in the production of nitrocellulose and cellulose acetate lacquers and as a solvent in adhesives and coatings.
ExBar™ 200 Excalibar Minerals LLC ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9.
ExBar™ 325 Excalibar Minerals LLC ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10.
ExBar™ 400 Excalibar Minerals LLC ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12.
ExBar™ W 1 Excalibar Minerals LLC ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起
ExBar™ W 2 Excalibar Minerals LLC ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起
ExBar™ W 3 Excalibar Minerals LLC ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起
ExBar™ W 325 Excalibar Minerals LLC ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起
ExBar™ W 4 Excalibar Minerals LLC ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起
ExBar™ W 400 Excalibar Minerals LLC ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起
ExCal® 100 Excalibar Minerals LLC ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 200 Excalibar Minerals LLC ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 325 Excalibar Minerals LLC ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 400 Excalibar Minerals LLC ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® CW 100 Excalibar Minerals LLC ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
ExCal® CW 200 Excalibar Minerals LLC ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
ExCal® CW 325 Excalibar Minerals LLC ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
Isopropanol (IPA) TOP Solvent Company Limited Isopropanol (IPA) is a clear colorless water-white mobile liquid with a mild alcohol like odor. It is miscible in all proportions with water and numerous organic liquids and is solvent in many organic substances. Isopropanol is primarily to form azeotropi...展开 Isopropanol (IPA) is a clear colorless water-white mobile liquid with a mild alcohol like odor. It is miscible in all proportions with water and numerous organic liquids and is solvent in many organic substances. Isopropanol is primarily to form azeotropic mixtures with water and many organic liquids. It is used in printing inks, adhesives, paints and coatings. 收起
Lipaton SB 2540 Synthomer Lipaton SB 2540 is an aqueous high solids dispersion of a styrene-butadiene copolymer. This product has a total solids content 67% and a viscosity of 1100 mPa.s. Lipaton SB 2540 is most commonly used in modified bituminous sealing system applications.
Lipaton SB 29Y141 Synthomer Lipaton SB 29Y141 is a water-based non-ionically stabilized hydrolysis-resistant dispersion of a carboxylated styrene-butadiene copolymer. This product has a total solids content of 47% and a viscosity of 90 mPa.s. Lipaton SB 29Y141 is most commonly use...展开 Lipaton SB 29Y141 is a water-based non-ionically stabilized hydrolysis-resistant dispersion of a carboxylated styrene-butadiene copolymer. This product has a total solids content of 47% and a viscosity of 90 mPa.s. Lipaton SB 29Y141 is most commonly used to modify hydraulic binders in mineral sealing slurry and cement-based adhesive applications. 收起
Lipaton SB 33Y50 Synthomer Lipaton SB 33Y50 is an aqueous non-ionically stabilized dispersion of a carboxylated butadiene-styrene copolymer latex which is resistant against saponification. This product has a total solids content of 51.5% and a viscosity of 110 mPa.s. Lipaton SB 3...展开 Lipaton SB 33Y50 is an aqueous non-ionically stabilized dispersion of a carboxylated butadiene-styrene copolymer latex which is resistant against saponification. This product has a total solids content of 51.5% and a viscosity of 110 mPa.s. Lipaton SB 33Y50 is most commonly used in sealing compound and surface protecting system production applications. 收起
Lipaton SB 5521 Synthomer Lipaton SB 5521 is a finely dispersed aqueous dispersion of a carboxylated styrene-butadiene copolymer. This product has a total solids content of 50% and a viscosity of 100 mPa.s. Lipaton SB 5521 is most commonly used as a binder in primer, protection ...展开 Lipaton SB 5521 is a finely dispersed aqueous dispersion of a carboxylated styrene-butadiene copolymer. This product has a total solids content of 50% and a viscosity of 100 mPa.s. Lipaton SB 5521 is most commonly used as a binder in primer, protection coating, and corrosion protection paint applications. 收起
Lipren B Synthomer Lipren B is an aqueous high solids dispersion of a polymer of 2-chlorobutadiene (1,3). This product has a density of 1.13 g/cm3 and a viscosity of 80 mPa.s. Lipren B is most commonly used to improve bitumen-based sealers and coatings.
Lipren SK Synthomer Lipren SK is an aqueous, colloidal dispersion of polymerized 2-chlorobutadiene (1,3). This product has a total solids content of 55% and a viscosity of less than 160 mPa.s. Lipren SK is most commonly used in film production applications.
Lipren T Synthomer Lipren T is an aqueous, colloidal dispersion of a polymer of 2-chlorobutadiene (1,3). This product has a total solids content of 58% and a viscosity of 100 mPa.s. Lipren T is most commonly used in fabric coating and lamination applications.
Lipren X 1112 Synthomer Lipren X 1112 is an aqueous, colloidal dispersion of polymerized of 2-chlorobutadiene (1.3). This product is used in the production of dipped goods and foams.
Litex® NX 1200 Synthomer Litex® NX 1200 is an aqueous, plasticizer-free and formaldehyde reduced dispersion of a butadiene-acrylonitrile copolymer that can be crosslinked by heat. This product has a total solids content of 45% and a viscosity of less than 100 mPa.s. Litex® NX 1...展开 Litex® NX 1200 is an aqueous, plasticizer-free and formaldehyde reduced dispersion of a butadiene-acrylonitrile copolymer that can be crosslinked by heat. This product has a total solids content of 45% and a viscosity of less than 100 mPa.s. Litex® NX 1200 is most commonly used in fabric coating applications. 收起
Litex® P 5100 Synthomer Litex® P 5100 is an aqueous, anionic carboxylated styrene/butadiene copolymer dispersion. This product has a total solids content of 50% and a viscosity of less than 350 mPa.s. Litex® P 5100 is most commonly used as a binder in paper coating color formu...展开 Litex® P 5100 is an aqueous, anionic carboxylated styrene/butadiene copolymer dispersion. This product has a total solids content of 50% and a viscosity of less than 350 mPa.s. Litex® P 5100 is most commonly used as a binder in paper coating color formulation applications. 收起
Litex® P 7110 Synthomer Litex® P 7110 is an aqueous, anionic carboxylated styrene/butadiene copolymer dispersion. This product has a total solids content of 50% and a viscosity of less than 350 mPa.s. Litex® P 7110 is most commonly used as a binder in paper coating color formula...展开 Litex® P 7110 is an aqueous, anionic carboxylated styrene/butadiene copolymer dispersion. This product has a total solids content of 50% and a viscosity of less than 350 mPa.s. Litex® P 7110 is most commonly used as a binder in paper coating color formulation applications. 收起
Litex® PX 9306 Synthomer Litex® PX 9306 is an aqueous, anionic carboxylated styrene/butadiene copolymer dispersion. This product has a total solids content 50% and a viscosity of less than 300 mPa.s. Litex® PX 9306 is most commonly used as a binder for paper coating color formu...展开 Litex® PX 9306 is an aqueous, anionic carboxylated styrene/butadiene copolymer dispersion. This product has a total solids content 50% and a viscosity of less than 300 mPa.s. Litex® PX 9306 is most commonly used as a binder for paper coating color formulation applications. 收起
Litex® PX 9330 Synthomer Litex® PX 9330 is an aqueous, anionic carboxylated styrene/butadiene copolymer dispersion. This product has a total solids content 50% and a viscosity of less than 350 mPa.s. Litex® PX 9330 is most commonly used as a binder for paper coating color formula...展开 Litex® PX 9330 is an aqueous, anionic carboxylated styrene/butadiene copolymer dispersion. This product has a total solids content 50% and a viscosity of less than 350 mPa.s. Litex® PX 9330 is most commonly used as a binder for paper coating color formulation applications. 收起
Litex® S 10656 Synthomer Litex® S 10656 is an aqueous, anionic dispersion, of a carboxylated self-crosslinking butadiene styrene methacrylate copolymer, containing a non-staining antioxidant. This product has a total solids content of 50% and a viscosity of less than 500 mPa.s. ...展开 Litex® S 10656 is an aqueous, anionic dispersion, of a carboxylated self-crosslinking butadiene styrene methacrylate copolymer, containing a non-staining antioxidant. This product has a total solids content of 50% and a viscosity of less than 500 mPa.s. Litex® S 10656 is most commonly used as a binder in glass fiber fabric finishing applications. 收起
Litex® S 25A10 Synthomer Litex® S 25A10 is an anionic, water-based dispersion of a carboxylated styrene butadiene copolymer. This product is most commonly used as a base in heavy coating system manufacturing applications.
Litex® T 59K20 Synthomer Litex® T 59K20 is an aqueous dispersion of a carboxylated styrene-butadiene copolymer. This product has a total solids content of 52.5% and a viscosity of less than 800 mPa.s. Litex® T 59K20 is most commonly used as a binder in high temperature-drying c...展开 Litex® T 59K20 is an aqueous dispersion of a carboxylated styrene-butadiene copolymer. This product has a total solids content of 52.5% and a viscosity of less than 800 mPa.s. Litex® T 59K20 is most commonly used as a binder in high temperature-drying coating applications. 收起
Litex® T 62W20 Synthomer Litex® T 62W20 is an aqueous dispersion of a carboxylated styrene-butadiene copolymer. This product has a total solids content of 50% and a viscosity of less than 500 mPa.s. Litex® T 62W20 is most commonly used in woven carpet finishing applications.
Litex® T 73G20 Synthomer Litex® T 73G20 is an aqueous dispersion of a carboxylated styrene-butadiene copolymer. This product has a total solids content of 52% and a viscosity of less than 500 mPa.s. Litex® T 73G20 is most commonly used in synthetic grass coating applications.
Litex® T 77N40 Synthomer Litex® T 77N40 is an aqueous dispersion of a carboxylated styrene-butadiene copolymer. This product has a total solids content of 52.5% and a viscosity of less than 800 mPa.s. Litex® T 77N40 is most commonly used in high temperature-drying coating appli...展开 Litex® T 77N40 is an aqueous dispersion of a carboxylated styrene-butadiene copolymer. This product has a total solids content of 52.5% and a viscosity of less than 800 mPa.s. Litex® T 77N40 is most commonly used in high temperature-drying coating applications. 收起
Litex® T 79N40 Synthomer Litex® T 79N40 is an aqueous dispersion of a carboxylated styrene-butadiene copolymer. This product has a total solids content of 52.5% and a viscosity of less than 600 mPa.s. Litex® T 79N40 is most commonly used in high temperature-drying coating applica...展开 Litex® T 79N40 is an aqueous dispersion of a carboxylated styrene-butadiene copolymer. This product has a total solids content of 52.5% and a viscosity of less than 600 mPa.s. Litex® T 79N40 is most commonly used in high temperature-drying coating applications. 收起
Lithene ultra® PH Synthomer Lithene ultra® PH is a viscous, low molecular weight, liquid polybutadiene with a high content of 1.2 vinyl microstructure. This product is used in antifoming coating additives and UV cure flexographic printing plates.
M30 Synthomer M30 is a low molecular weight, solid polyvinyl acetate in a colorless bead form. This product is most commonly used as an additive in solvent-based coating, ink, and adhesive applications.
M35/73 Solution Synthomer M35/73 Solution is a copolymer of vinyl acetate and dibutyl maleate dissolved in ethyl acetate in a colorless solution form. This product has a total solid content of 59-61% and a density of 1.05 g/cm3. M35/73 Solution is most commonly used in primer, s...展开 M35/73 Solution is a copolymer of vinyl acetate and dibutyl maleate dissolved in ethyl acetate in a colorless solution form. This product has a total solid content of 59-61% and a density of 1.05 g/cm3. M35/73 Solution is most commonly used in primer, sealer, binder, and heat seal adhesive formulation applications. 收起
M50 Synthomer M50 is a medium molecular weight, solid polyvinyl acetate in a solid, colorless bead form. This product has a total solid content of greater than 99% and a viscosity of 80-140 mPa.s. M50 is most commonly used in solvent-based ink, coating, and adhesive ...展开 M50 is a medium molecular weight, solid polyvinyl acetate in a solid, colorless bead form. This product has a total solid content of greater than 99% and a viscosity of 80-140 mPa.s. M50 is most commonly used in solvent-based ink, coating, and adhesive applications. 收起
M60 Synthomer M60 is a low molecular weight, solid polyvinyl acetate in a colorless bead form. This product is most commonly used as an additive in solvent-based coating, ink, adhesive, and melt extrusion system applications.
MCT5 Synthomer MCT5 is a low molecular weight, solid copolymer of vinyl acetate and crotonic acid. This product has a total solids content of greater than 99% and a viscosity of 7-13 mPa.s. MCT5 is most commonly used in solvent-based adhesive and ink, as well as alkali...展开 MCT5 is a low molecular weight, solid copolymer of vinyl acetate and crotonic acid. This product has a total solids content of greater than 99% and a viscosity of 7-13 mPa.s. MCT5 is most commonly used in solvent-based adhesive and ink, as well as alkali removable coating applications. 收起
MCT5 AMF Synthomer MCT5 AMF solution is a copolymer of vinyl acetate and crotonic acid in an ammonia-neutralized ethanol/water mixture. This product has a total solid content of 48-50% and a viscosity of 1800-4200 mPa.s. MCT5 AMF is most commonly used as a pigment dispers...展开 MCT5 AMF solution is a copolymer of vinyl acetate and crotonic acid in an ammonia-neutralized ethanol/water mixture. This product has a total solid content of 48-50% and a viscosity of 1800-4200 mPa.s. MCT5 AMF is most commonly used as a pigment dispersant in aqueous paste, interior, and exterior primer, as an adhesion promoter in alkali-removable ink and adhesive, and as a binder in ink applications. 收起
Methanol TOP Solvent Company Limited Methanol (MeOH) also known as Methyl Alcohol or wood spirit, is the most simple alcohol with a single carbon atom. Its many different applications include the manufacture of acetic, acid, acetic anhydride, formaldehyde, MMA. The primary use of methanol is...展开 Methanol (MeOH) also known as Methyl Alcohol or wood spirit, is the most simple alcohol with a single carbon atom. Its many different applications include the manufacture of acetic, acid, acetic anhydride, formaldehyde, MMA. The primary use of methanol is in printing inks, paints and coatings as solvents, thinners, denaturant for ethanol and producing biodiesel. 收起
Methyl Acetate-Methanol Mixture Synthomer Methyl Acetate-Methanol Mixture is a blend of methyl acetate and methanol in a white liquid form. This product has a methyl acetate content of 76-84% and a methanol content of 16-24%. Methyl Acetate-Methanol Mixture is most commonly used as a solvent in...展开 Methyl Acetate-Methanol Mixture is a blend of methyl acetate and methanol in a white liquid form. This product has a methyl acetate content of 76-84% and a methanol content of 16-24%. Methyl Acetate-Methanol Mixture is most commonly used as a solvent in paint and spirit-based coating applications. 收起
Methyl Ethyl Ketone (MEK) TOP Solvent Company Limited Methyl ethyl ketone (MEK) is a colorless, low viscosity liquid with a slight odor similar to that of acetone. It is fully miscible with many organic liquids, but is limited to the miscibility with water. With natural and synthetic resins, MEK produces sol...展开 Methyl ethyl ketone (MEK) is a colorless, low viscosity liquid with a slight odor similar to that of acetone. It is fully miscible with many organic liquids, but is limited to the miscibility with water. With natural and synthetic resins, MEK produces solutions with low viscosity and high solid content. The primary use for this product is a solvent for printing inks, adhesives, paints and coatings. 收起
Methyl Isobutyl Ketone (MIBK) TOP Solvent Company Limited Methyl isobutyl ketone (MIBK) is a colorless, medium boiling liquid, with a distinguishing mild odor. It is miscible with the common solvents and diluent, but only slightly with water. MIBK is a solvent power for nitrocellulose, many natural and synthetic...展开 Methyl isobutyl ketone (MIBK) is a colorless, medium boiling liquid, with a distinguishing mild odor. It is miscible with the common solvents and diluent, but only slightly with water. MIBK is a solvent power for nitrocellulose, many natural and synthetic resins and can produce solutions of low viscosity and high solid content. The primary use for this product is a solvent for printing inks, adhesives, paints and coatings. 收起
Methylene Chloride TOP Solvent Company Limited Methylene Chloride is a clear transparent organochloride compound widely used as a solvent. This product is a neutral liquid heavier than water and non-flammable. Methylene Chloride is fully miscible with almost all organic solvents but only slightly with...展开 Methylene Chloride is a clear transparent organochloride compound widely used as a solvent. This product is a neutral liquid heavier than water and non-flammable. Methylene Chloride is fully miscible with almost all organic solvents but only slightly with water. It has solvent properties with most organic chemicals and materials. This product is primarily used as a solvent in paints and coatings. 收起
N-Butyl Acetate (BA) TOP Solvent Company Limited N-Butyl acetate (BA) is a neutral colorless liquid with a unique odor. Butyl acetate has good solvent properties, and it has good volatility, high ability to be diluted makes it one of the most important medium-volatility solvents. N-Butyl acetate is prim...展开 N-Butyl acetate (BA) is a neutral colorless liquid with a unique odor. Butyl acetate has good solvent properties, and it has good volatility, high ability to be diluted makes it one of the most important medium-volatility solvents. N-Butyl acetate is primarily used as a solvent in printing inks, adhesives, paints and coatings. 收起
Plextol B 500 Synthomer Plextol B 500 is an aqueous dispersion of a nonionic stabilized thermoplastic acrylic polymer. This product has a density of 1.07 g/cm3 and an average particle size of 0.15 microns. Plextol B 500 is most commonly used in film-forming applications.
Plextol D 152 Synthomer Plextol D 152 is an aqueous emulsion of a thermoplastic acrylic polymer. This product has a total solids content of 65% an a viscosity of 1000-3000 mPa.s. Plextol D 152 is most commonly used in adhesive applications.
Plextol D 156 Synthomer Plextol D 156 is an APEO-free aqueous emulsion of a thermoplastic acrylic polymer. This product has a total solids content of 65% an a viscosity of 200-1600 mPa.s. Plextol D 156 is most commonly used in adhesive applications.
Plextol D 171 Synthomer Plextol D 171 is a finely dispersed aqueous dispersion of an acrylic ester copolymer. This product has a total solids content of 60% an a viscosity of 200-800 mPa.s. Plextol D 171 is most commonly used in adhesive applications.
Plextol D 207 Synthomer Plextol D 207 is an aqueous emulsion of a thermoplastic acrylic polymer. This product has a total solids content of 55% an a viscosity of 200-1000 mPa.s. Plextol D 207 is most commonly used in adhesive applications.
Plextol D 224 Synthomer Plextol D 224 is an aqueous emulsion of a thermoplastic acrylic polymer. This product has a total solids content of 59% an a viscosity of 40-300 mPa.s. Plextol D 224 is most commonly used in adhesive applications.
Plextol D 237 Synthomer Plextol D 237 is an aqueous emulsion of a thermoplastic acrylic polymer. This product has a total solids content of 60% an a viscosity of 400-1200 mPa.s. Plextol D 237 is most commonly used in adhesive applications.
Plextol D 306 Synthomer Plextol D 306 is a form filming aid, solvent, and plasticizer-free, aqueous high solids dispersion of an acrylic ester copolymer. This product has a total solids content of 60% an a viscosity of 1500 mPa.s. Plextol D 306 is most commonly used in adhesive ...展开 Plextol D 306 is a form filming aid, solvent, and plasticizer-free, aqueous high solids dispersion of an acrylic ester copolymer. This product has a total solids content of 60% an a viscosity of 1500 mPa.s. Plextol D 306 is most commonly used in adhesive applications. 收起
Plextol D 335 Synthomer Plextol D 335 is a form filming aid, solvent, and plasticizer-free, high solids aqueous dispersion of a modified acrylic copolymer. This product has a total solids content of 60.5% and a viscosity of 2000 mPa.s. Plextol D 335 is most commonly used in floo...展开 Plextol D 335 is a form filming aid, solvent, and plasticizer-free, high solids aqueous dispersion of a modified acrylic copolymer. This product has a total solids content of 60.5% and a viscosity of 2000 mPa.s. Plextol D 335 is most commonly used in flooring adhesive applications. 收起
Plextol D 487 Synthomer Plextol D 487 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. This product has a total solids content of 50% and a viscosity of 2500 mPa.s. Plextol D 487 is most commonly used as a binder in house paint application...展开 Plextol D 487 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. This product has a total solids content of 50% and a viscosity of 2500 mPa.s. Plextol D 487 is most commonly used as a binder in house paint applications. 收起
Plextol D 507 Synthomer Plextol D 507 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. This product has a total solids content of 50% and a viscosity of 3500 mPa.s. Plextol D 507 is most commonly used in concrete roof tile coating produc...展开 Plextol D 507 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. This product has a total solids content of 50% and a viscosity of 3500 mPa.s. Plextol D 507 is most commonly used in concrete roof tile coating production applications. 收起
Plextol D 509 Synthomer Plextol D 509 is a ready-for-use finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. This product has a total solids content of 50% and a viscosity of 600 mPa.s. Plextol D 509 is most commonly used in mortar, plaster, prim...展开 Plextol D 509 is a ready-for-use finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. This product has a total solids content of 50% and a viscosity of 600 mPa.s. Plextol D 509 is most commonly used in mortar, plaster, primer, sealer, and building adhesive applications. 收起
Plextol D 512 Synthomer Plextol D 512 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. This product has a total solids content of 50% and a viscosity of 2500 mPa.s. Plextol D 512 is most commonly used in high-grade, non-yellowing paint, ...展开 Plextol D 512 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. This product has a total solids content of 50% and a viscosity of 2500 mPa.s. Plextol D 512 is most commonly used in high-grade, non-yellowing paint, plaster, coating, and primer applications. 收起
Plextol D 512 JA Synthomer Plextol D 512 JA is a low viscosity, finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. This product is used in high-grade, non-yellowing facade paints, synthetic resin plasters, coatings for concrete roof tiles, tinting p...展开 Plextol D 512 JA is a low viscosity, finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. This product is used in high-grade, non-yellowing facade paints, synthetic resin plasters, coatings for concrete roof tiles, tinting paints, coatings for concrete, and primers for mineral substrates. 收起
Plextol D 561 Synthomer Plextol D 561 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. This product has a total solids content of 49% and a viscosity of 50 mPa.s. Plextol D 561 is most commonly used in high-grade, non-yellowing paint, plas...展开 Plextol D 561 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. This product has a total solids content of 49% and a viscosity of 50 mPa.s. Plextol D 561 is most commonly used in high-grade, non-yellowing paint, plaster, coating, and primer applications. 收起
Plextol DS 152 Synthomer Plextol DS 152 is a low VOC aqueous emulsion of a thermoplastic acrylic polymer. This product has a total solids content of 65% and a viscosity of 900-2000 mPa.s. Plextol DS 152 is most commonly used in adhesive applications.
Plextol DS 155 Synthomer Plextol DS 155 is a low VOC aqueous emulsion of a thermoplastic acrylic polymer. This product has a total solids content of 65% and a viscosity of less than 800 mPa.s. Plextol DS 155 is most commonly used in flooring adhesive manufacturing applications.
Plextol DV 245 Synthomer Plextol DV 245 is an aqueous emulsion of a self-crosslinking acrylic polymer. This product has a total solids content of 55% and a viscosity of less than 500 mPa.s. Plextol DV 245 is most commonly used in adhesive applications.
Plextol E 303 Synthomer Plextol E 303 is an aqueous emulsion of a self-crosslinking acrylic polymer. This product has a total solids content of 60% and a viscosity of less than 600 mPa.s. Plextol E 303 is most commonly used in flooring adhesive applications.
Plextol M 625 Synthomer Plextol M 625 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. This product has a total solids content of 50% and a viscosity of 1600 mPa.s. Plextol M 625 is most commonly used in non-yellowing, blocking-resistant...展开 Plextol M 625 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. This product has a total solids content of 50% and a viscosity of 1600 mPa.s. Plextol M 625 is most commonly used in non-yellowing, blocking-resistant coating applications. 收起
Plextol P 2090 Synthomer Plextol P 2090 is an aqueous, anionic styrene-acrylic copoylmer dispersion. This product has a total solids content of 50% and a viscosity of less than 400 mPa.s. Plextol P 2090 is most commonly used as a binder in paper color coating applications.
Plextol R 100 Synthomer Plextol R 100 is an acrylic copolymer dispersion. This product has a total solids content of 62% and a viscosity of less than 550 mPa.s. Plextol R 100 is most commonly used as an additive to caulk, sealant, adhesive, and paint applications.
Plextol R 123 Synthomer Plextol R 123 is an acrylic copolymer dispersion. This product has a total solids content of 60% and a viscosity of 300 mPa.s. Plextol R 123 is most commonly used in exterior elastomeric wall coating, caulk, mastic, and sealant applications where higher...展开 Plextol R 123 is an acrylic copolymer dispersion. This product has a total solids content of 60% and a viscosity of 300 mPa.s. Plextol R 123 is most commonly used in exterior elastomeric wall coating, caulk, mastic, and sealant applications where higher alkali and water-resistance is required. 收起
Plextol R 4126 Synthomer Plextol R 4126 is an acrylic polymer dispersion. This product has a total solid content of 49-51% and a viscosity of 100-500 cPs. Plextol R 4126 is most commonly used in gloss paint and roof coating applications.
Plextol R 4184 Synthomer Plextol R 4184 is an acrylic polymer dispersion. This product has a total solids content of 44-46% and a viscosity of 100-1000 cPs. Plextol R 4184 is most commonly used in exterior and interior paint, as well as wall sealer applications.
Plextol R 4189 Synthomer Plextol R 4189 is a fine particle-sized acrylic polymer dispersion stabilized by an APEO-free surfactant. This product has a total solids content of 39-41% and a viscosity maximum of 500 cPs. Plextol R 4189 is most commonly used in wood coating applicat...展开 Plextol R 4189 is a fine particle-sized acrylic polymer dispersion stabilized by an APEO-free surfactant. This product has a total solids content of 39-41% and a viscosity maximum of 500 cPs. Plextol R 4189 is most commonly used in wood coating applications. 收起
Plextol R 5335 Synthomer Plextol R 5335 is a pure acrylic copolymer dispersion. This product has a total solids content of 46% and a viscosity of 550 mPa.s. Plextol R 5335 is most commonly used in high-performance trim paint and wood stain applications.
Plextol R 5376 Synthomer Plextol R 5376 is a surfactant stabilised acrylic ester copolymer dispersion. This product has a total solids content of 55% and a viscosity of 100-1000 mPa.s. Plextol R 5376 is most commonly used in adhesive applications.
Plextol R 5377 Synthomer Plextol R 5377 is a surfactant stabilized acrylic ester copolymer dispersion. This product has a total solids content of 55% and a viscosity of 100-1000 mPa.s. Plextol R 5377 is most commonly used in adhesive applications.
Plextol R 5511 Synthomer Plextol R 5511 is a pure acrylic copolymer dispersion. This product has a total solids content of 60% and a viscosity of 1100 mPa.s. Plextol R 5511 is most commonly used in crack-building wall paint and flexible roof coating applications.
Plextol R 5530 Synthomer Plextol R 5530 is a VeoVa/acrylic copolymer dispersion. This product has a total solids content of 46% and a viscosity of 725 mPa.s. Plextol R 5530 is most commonly used in metal primer and direct-to-metal coating applications.