UL Prospector

成功!

成功保存搜索结果
Acetone TOP Solvent Company Limited Acetone, also known as 2-propanone or dimethyl ketone (DMK), is a colorless, low boiling, easy pouring liquid with a distinguishing odor. It is miscible in all proportions with water, alcohols, many hydrocarbons and other organic liquids. It has solvent p...展开 Acetone, also known as 2-propanone or dimethyl ketone (DMK), is a colorless, low boiling, easy pouring liquid with a distinguishing odor. It is miscible in all proportions with water, alcohols, many hydrocarbons and other organic liquids. It has solvent properties for vegetable and animal fats, cellulose, natural and synthetic resins and many other organic substances. The primary use for this product is in printing inks, adhesives, paints and coatings. 收起
Butyl Glycol Ether (BGE) TOP Solvent Company Limited Butyl Glycol Ether (BGE) is a colorless, slight smelling liquid with a high boiling point. This product has small hygroscopic properties and is miscible with water at room temperature. This liquid solution is also miscible with several different oxygenate...展开 Butyl Glycol Ether (BGE) is a colorless, slight smelling liquid with a high boiling point. This product has small hygroscopic properties and is miscible with water at room temperature. This liquid solution is also miscible with several different oxygenated solvents, as well as with aliphatic and aromatic hydrocarbons and oils. It is solvent for many natural and synthetic resins, nitrocellulose and ethyl cellulose. Butyl Glycol Either (BGE) is primarily used as a solvent in printing inks, paints and coatings. 收起
Ethyl Acetate (EA) TOP Solvent Company Limited Ethyl acetate (EA) is a neutral colorless liquid with a pleasantly fruity odor. Ethyl acetate is primarily used in the production of nitrocellulose and cellulose acetate lacquers and as a solvent in adhesives and coatings.
ExBar™ 200 Excalibar Minerals LLC ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9.
ExBar™ 325 Excalibar Minerals LLC ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10.
ExBar™ 400 Excalibar Minerals LLC ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12.
ExBar™ W 1 Excalibar Minerals LLC ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起
ExBar™ W 2 Excalibar Minerals LLC ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起
ExBar™ W 3 Excalibar Minerals LLC ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起
ExBar™ W 325 Excalibar Minerals LLC ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起
ExBar™ W 4 Excalibar Minerals LLC ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起
ExBar™ W 400 Excalibar Minerals LLC ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起
ExCal® 100 Excalibar Minerals LLC ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 200 Excalibar Minerals LLC ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 325 Excalibar Minerals LLC ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 400 Excalibar Minerals LLC ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® CW 100 Excalibar Minerals LLC ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
ExCal® CW 200 Excalibar Minerals LLC ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
ExCal® CW 325 Excalibar Minerals LLC ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
Isopropanol (IPA) TOP Solvent Company Limited Isopropanol (IPA) is a clear colorless water-white mobile liquid with a mild alcohol like odor. It is miscible in all proportions with water and numerous organic liquids and is solvent in many organic substances. Isopropanol is primarily to form azeotropi...展开 Isopropanol (IPA) is a clear colorless water-white mobile liquid with a mild alcohol like odor. It is miscible in all proportions with water and numerous organic liquids and is solvent in many organic substances. Isopropanol is primarily to form azeotropic mixtures with water and many organic liquids. It is used in printing inks, adhesives, paints and coatings. 收起
Methanol TOP Solvent Company Limited Methanol (MeOH) also known as Methyl Alcohol or wood spirit, is the most simple alcohol with a single carbon atom. Its many different applications include the manufacture of acetic, acid, acetic anhydride, formaldehyde, MMA. The primary use of methanol is...展开 Methanol (MeOH) also known as Methyl Alcohol or wood spirit, is the most simple alcohol with a single carbon atom. Its many different applications include the manufacture of acetic, acid, acetic anhydride, formaldehyde, MMA. The primary use of methanol is in printing inks, paints and coatings as solvents, thinners, denaturant for ethanol and producing biodiesel. 收起
Methyl Ethyl Ketone (MEK) TOP Solvent Company Limited Methyl ethyl ketone (MEK) is a colorless, low viscosity liquid with a slight odor similar to that of acetone. It is fully miscible with many organic liquids, but is limited to the miscibility with water. With natural and synthetic resins, MEK produces sol...展开 Methyl ethyl ketone (MEK) is a colorless, low viscosity liquid with a slight odor similar to that of acetone. It is fully miscible with many organic liquids, but is limited to the miscibility with water. With natural and synthetic resins, MEK produces solutions with low viscosity and high solid content. The primary use for this product is a solvent for printing inks, adhesives, paints and coatings. 收起
Methyl Isobutyl Ketone (MIBK) TOP Solvent Company Limited Methyl isobutyl ketone (MIBK) is a colorless, medium boiling liquid, with a distinguishing mild odor. It is miscible with the common solvents and diluent, but only slightly with water. MIBK is a solvent power for nitrocellulose, many natural and synthetic...展开 Methyl isobutyl ketone (MIBK) is a colorless, medium boiling liquid, with a distinguishing mild odor. It is miscible with the common solvents and diluent, but only slightly with water. MIBK is a solvent power for nitrocellulose, many natural and synthetic resins and can produce solutions of low viscosity and high solid content. The primary use for this product is a solvent for printing inks, adhesives, paints and coatings. 收起
Methylene Chloride TOP Solvent Company Limited Methylene Chloride is a clear transparent organochloride compound widely used as a solvent. This product is a neutral liquid heavier than water and non-flammable. Methylene Chloride is fully miscible with almost all organic solvents but only slightly with...展开 Methylene Chloride is a clear transparent organochloride compound widely used as a solvent. This product is a neutral liquid heavier than water and non-flammable. Methylene Chloride is fully miscible with almost all organic solvents but only slightly with water. It has solvent properties with most organic chemicals and materials. This product is primarily used as a solvent in paints and coatings. 收起
N-Butyl Acetate (BA) TOP Solvent Company Limited N-Butyl acetate (BA) is a neutral colorless liquid with a unique odor. Butyl acetate has good solvent properties, and it has good volatility, high ability to be diluted makes it one of the most important medium-volatility solvents. N-Butyl acetate is prim...展开 N-Butyl acetate (BA) is a neutral colorless liquid with a unique odor. Butyl acetate has good solvent properties, and it has good volatility, high ability to be diluted makes it one of the most important medium-volatility solvents. N-Butyl acetate is primarily used as a solvent in printing inks, adhesives, paints and coatings. 收起
Nipol® 1001 Zeon Corporation Nipol® 1001 is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product is a standard high acrylonitrile NBR for hot polymerization systems. Its specific gravity is 1.00 and it contains 40.5% bound acrylonitrile NBR.
Nipol® 1041 Zeon Corporation Nipol® 1041 is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product is a standard high acrylonitrile NBR for cold polymerization systems. Its specific gravity is 1.00 and it contains 40.5% bound acrylonitrile NBR.
Nipol® 1041L Zeon Corporation Nipol® 1041L is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product is a standard high acrylonitrile NBR for cold polymerization systems. Its specific gravity is 1.00 and it contains 40.5% bound acrylonitrile NBR. ...展开 Nipol® 1041L is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product is a standard high acrylonitrile NBR for cold polymerization systems. Its specific gravity is 1.00 and it contains 40.5% bound acrylonitrile NBR. This product is a low Mooney version of N21 that provides good processability. 收起
Nipol® 1072 Zeon Corporation Nipol® 1072 is a high nitrile rubber (NBR) terpolymer that can be used in adhesives and industrial parts. This product is a carboxylated NBR that provides good abrasion resistance and tensile strength. Its specific gravity is 0.98 and it contains 27.0% ...展开 Nipol® 1072 is a high nitrile rubber (NBR) terpolymer that can be used in adhesives and industrial parts. This product is a carboxylated NBR that provides good abrasion resistance and tensile strength. Its specific gravity is 0.98 and it contains 27.0% bound acrylonitrile NBR. 收起
Nipol® 1562 Zeon Corporation Nipol® 1562 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 10.0 and it contains 41% solids. Its average particle diameter is 50 nanometers, and its glass transition temperature is -21 degrees Celsi...展开 Nipol® 1562 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 10.0 and it contains 41% solids. Its average particle diameter is 50 nanometers, and its glass transition temperature is -21 degrees Celsius. 收起
Nipol® 1571C2 Zeon Corporation Nipol® 1571C2 is a latex of an acrylonitrile butadiene rubber that can be used in adhesives. This product's pH is 8.5 and it contains 45% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -10 degrees Celsius...展开 Nipol® 1571C2 is a latex of an acrylonitrile butadiene rubber that can be used in adhesives. This product's pH is 8.5 and it contains 45% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -10 degrees Celsius. 收起
Nipol® 1571CL Zeon Corporation Nipol® 1571CL is a latex of an acrylonitrile butadiene rubber that can be used in adhesives. This product's pH is 8.0 and it contains 38% solids. Its average particle diameter is 100 nanometers and its glass transition temperature is -11 degrees Celsius...展开 Nipol® 1571CL is a latex of an acrylonitrile butadiene rubber that can be used in adhesives. This product's pH is 8.0 and it contains 38% solids. Its average particle diameter is 100 nanometers and its glass transition temperature is -11 degrees Celsius. 收起
Nipol® 1571H Zeon Corporation Nipol® 1571H is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.3 and it contains 40% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -8 degrees Celsiu...展开 Nipol® 1571H is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.3 and it contains 40% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -8 degrees Celsius. 收起
Nipol® DN101 Zeon Corporation Nipol® DN101 is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product has good resistance to mold fouling and good metal corrosion resistance. Its specific gravity is 1.00 and it contains 42.5% bound acrylonitrile ru...展开 Nipol® DN101 is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product has good resistance to mold fouling and good metal corrosion resistance. Its specific gravity is 1.00 and it contains 42.5% bound acrylonitrile rubber. 收起
Nipol® DN101L Zeon Corporation Nipol® DN101L is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product has good resistance to mold fouling and good metal corrosion resistance. Its specific gravity is 1.00 and it contains 42.5% bound acrylonitrile r...展开 Nipol® DN101L is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product has good resistance to mold fouling and good metal corrosion resistance. Its specific gravity is 1.00 and it contains 42.5% bound acrylonitrile rubber. This product has a lower Mooney viscosity than DN101. 收起
Nipol® LX110 Zeon Corporation Nipol® LX110 is a latex of a styrene-butadiene copolymer that can be used adhesives. This product's pH is 11.5 and it contains 40.5% solids. its average particle diameter is 80 nanometers and its glass transition temperature is -47 degrees Celsius.
Nipol® LX112 Zeon Corporation Nipol® LX112 is a latex of a styrene-butadiene copolymer that can be used in adhesives. This product's pH is 11.0 and it contains 40.5% solids. Its average particle diameter is 80 nanometers and its glass transition temperature is -47 degrees Celsius.
Nipol® LX426 Zeon Corporation Nipol® LX426 is a latex of a styrene-butadiene copolymer that can be used in adhesives. This product's pH is 8.5 and it contains 50% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -39 degrees Celsius.
Nipol® LX430 Zeon Corporation Nipol® LX430 is a latex of a styrene-butadiene copolymer that can be used in wood adhesives. This product's pH is 7.0 and it contains 49% solids. Its average particle diameter is 150 nanometers and its glass transition temperature is 12 degrees Celsius.
Nipol® LX432M Zeon Corporation Nipol® LX432M is a latex of a styrene-butadiene copolymer that can be used in adhesives and primers for masking tape. This product's pH is 8.0 and it contains 41% solids. Its average particle diameter is 130 nanometers and its glass transition temperatu...展开 Nipol® LX432M is a latex of a styrene-butadiene copolymer that can be used in adhesives and primers for masking tape. This product's pH is 8.0 and it contains 41% solids. Its average particle diameter is 130 nanometers and its glass transition temperature is -55 degrees Celsius. 收起
Nipol® LX435 Zeon Corporation Nipol® LX435 is a latex of a styrene-butadiene copolymer that can be used in adhesives. This product's pH is 8.5 and it contains 50% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -14 degrees Celsius.
Nipol® LX473D Zeon Corporation Nipol® LX473D is a latex of a styrene-butadiene copolymer that can be used in flooring adhesives. This product's average particle diameter is 80 nanometers and it contains 47.5% solids. Its pH is 8.5 and its glass transition temperature is -15 degrees C...展开 Nipol® LX473D is a latex of a styrene-butadiene copolymer that can be used in flooring adhesives. This product's average particle diameter is 80 nanometers and it contains 47.5% solids. Its pH is 8.5 and its glass transition temperature is -15 degrees Celsius. 收起
Nipol® LX511A Zeon Corporation Nipol® LX511A is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.0 and it contains 46% solids. Its average particle diameter is 170 nanometers and its glass transition temperature is -19 degrees Cels...展开 Nipol® LX511A is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.0 and it contains 46% solids. Its average particle diameter is 170 nanometers and its glass transition temperature is -19 degrees Celsius. 收起
Nipol® LX513 Zeon Corporation Nipol® LX513 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 10.0 and it contains 45% solids. Its average particle diameter is 140 nanometers and its glass transition temperature is -31 degrees Cels...展开 Nipol® LX513 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 10.0 and it contains 45% solids. Its average particle diameter is 140 nanometers and its glass transition temperature is -31 degrees Celsius. 收起
Nipol® LX517B Zeon Corporation Nipol® LX517B is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.0 and it contains 40% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -16 degrees Cels...展开 Nipol® LX517B is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.0 and it contains 40% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -16 degrees Celsius. 收起
Nipol® LX550 Zeon Corporation Nipol® LX550 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.5 and it contains 45% solids. Its average particle diameter is 110 nanometers and its glass transition temperature is -27 degrees Celsi...展开 Nipol® LX550 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.5 and it contains 45% solids. Its average particle diameter is 110 nanometers and its glass transition temperature is -27 degrees Celsius. 收起
Nipol® LX550L Zeon Corporation Nipol® LX550L is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.3 and it contains 45% solids. Its average particle diameter is 110 nanometers and its glass transition temperature is -27 degrees Cels...展开 Nipol® LX550L is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.3 and it contains 45% solids. Its average particle diameter is 110 nanometers and its glass transition temperature is -27 degrees Celsius. 收起
Nipol® LX551 Zeon Corporation Nipol® LX551 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.5 and it contains 45% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -14 degrees Celsi...展开 Nipol® LX551 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.5 and it contains 45% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -14 degrees Celsius. 收起
Nipol® LX552 Zeon Corporation Nipol® LX552 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.0 and it contains 45% solids. Its average particle diameter is 110 nanometers and its glass transition temperature is -12 degrees Celsi...展开 Nipol® LX552 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.0 and it contains 45% solids. Its average particle diameter is 110 nanometers and its glass transition temperature is -12 degrees Celsius. 收起
Nipol® LX811H Zeon Corporation Nipol® LX811H is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives. This product's pH is 6.5 and it contains 50% solids. Its viscosity is 170 mPas and its glass transition temperature is 1 de...展开 Nipol® LX811H is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives. This product's pH is 6.5 and it contains 50% solids. Its viscosity is 170 mPas and its glass transition temperature is 1 degree Celsius. 收起
Nipol® LX814 Zeon Corporation Nipol® LX814 is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives. This product's pH is 6.0 and it contains 46% solids. Its viscosity is 30 mPas and its glass transition temperature is 25 deg...展开 Nipol® LX814 is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives. This product's pH is 6.0 and it contains 46% solids. Its viscosity is 30 mPas and its glass transition temperature is 25 degrees Celsius. 收起
Nipol® LX816A Zeon Corporation Nipol® LX816A is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives and pigment printing. This product's pH is 2.0 and it contains 42% solids. Its viscosity is 30 mPas and its glass transition...展开 Nipol® LX816A is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives and pigment printing. This product's pH is 2.0 and it contains 42% solids. Its viscosity is 30 mPas and its glass transition temperature is -10 degrees Celsius. 收起
Nipol® LX820A Zeon Corporation Nipol® LX820A is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives and paints. This product's pH is 7.5 and it contains 55% solids. Its viscosity is 3,000 mPas and its glass transition temper...展开 Nipol® LX820A is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives and paints. This product's pH is 7.5 and it contains 55% solids. Its viscosity is 3,000 mPas and its glass transition temperature is -43 degrees Celsius. 收起
Nipol® LX851C Zeon Corporation Nipol® LX851C is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains extremely low formaldehyde and resists discoloration from light and age. It cont...展开 Nipol® LX851C is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains extremely low formaldehyde and resists discoloration from light and age. It contains 45% solids and its pH is 6.5. 收起
Nipol® LX851E Zeon Corporation Nipol® LX851E is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains extremely low formaldehyde and resists discoloration from light and age. It contai...展开 Nipol® LX851E is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains extremely low formaldehyde and resists discoloration from light and age. It contains 45% solids and its pH is 6.0. 收起
Nipol® LX851F2 Zeon Corporation Nipol® LX851F2 is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains extremely low formaldehyde and resists discoloration from light and age. It contain...展开 Nipol® LX851F2 is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains extremely low formaldehyde and resists discoloration from light and age. It contains 45% solids and its pH is 7.0. 收起
Nipol® LX852B Zeon Corporation Nipol® LX852B is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains extremely low formaldehyde and resists discoloration from light and age. It contains...展开 Nipol® LX852B is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains extremely low formaldehyde and resists discoloration from light and age. It contains 45% solids and its pH is 6.5. 收起
Nipol® LX854E Zeon Corporation Nipol® LX854E is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains low formaldehyde and 45% solids. Its pH is 6.5 and its glass transition temperature...展开 Nipol® LX854E is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains low formaldehyde and 45% solids. Its pH is 6.5 and its glass transition temperature is -10 degrees Celsius. 收起
Nipol® LX874 Zeon Corporation Nipol® LX874 is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives and pigment printing. This product is resistant to dry cleaning with good waterproofing characteristics. It contains 45% soli...展开 Nipol® LX874 is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives and pigment printing. This product is resistant to dry cleaning with good waterproofing characteristics. It contains 45% solids and its pH is 6.5. 收起
Quintone® 1325 Zeon Corporation Quintone® 1325 is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in oil and alkyd paints, printing inks, and as a tackifier for rubber adhesives. Its softening point ...展开 Quintone® 1325 is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in oil and alkyd paints, printing inks, and as a tackifier for rubber adhesives. Its softening point is 125 degrees Celsius and its molecular weight is 460. 收起
Quintone® 1345 Zeon Corporation Quintone® 1345 is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in oil and alkyd paints, printing inks, and as a tackifier for rubber adhesives. Its softening point ...展开 Quintone® 1345 is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in oil and alkyd paints, printing inks, and as a tackifier for rubber adhesives. Its softening point is 140 degrees Celsius and its molecular weight is 500. 收起
Quintone® 1500 Zeon Corporation Quintone® 1500 is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in nitrocellulose lacquer alkyd epoxies, polyester paints, and adhesives. Its softening point is 100 ...展开 Quintone® 1500 is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in nitrocellulose lacquer alkyd epoxies, polyester paints, and adhesives. Its softening point is 100 degrees Celsius and its molecular weight is 420. 收起
Quintone® 1525L Zeon Corporation Quintone® 1525L is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in nitrocellulose lacquer alkyd epoxies, polyester paints, and adhesives. Its softening point is 125...展开 Quintone® 1525L is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in nitrocellulose lacquer alkyd epoxies, polyester paints, and adhesives. Its softening point is 125 degrees Celsius and its molecular weight is 470. 收起
Quintone® A100 Zeon Corporation Quintone® A100 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in adhesives for natural rubber. Its softening point is 100 degrees Celsius and it contains less than 0....展开 Quintone® A100 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in adhesives for natural rubber. Its softening point is 100 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. 收起
Quintone® B170 Zeon Corporation Quintone® B170 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in adhesives. Its softening point is 70 degrees Celsius, and it contains less than 0.1 mg of potassium h...展开 Quintone® B170 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in adhesives. Its softening point is 70 degrees Celsius, and it contains less than 0.1 mg of potassium hydroxide per gram. 收起
Quintone® C200H (ZCT) Zeon Corporation Quintone® C200H (ZCT) is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in hot-melt traffic paints and provides good heat stability and colors. Its softening point is 101 degrees Ce...展开 Quintone® C200H (ZCT) is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in hot-melt traffic paints and provides good heat stability and colors. Its softening point is 101 degrees Celsius and it contains 1.7 mg of potassium hydroxide per gram. 收起
Quintone® C200S Zeon Corporation Quintone® C200S is a petroleum made mainly from 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in hot-melt traffic paints and provides good heat stability and colors. Its softening point is 96 degrees Celsius and it ...展开 Quintone® C200S is a petroleum made mainly from 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in hot-melt traffic paints and provides good heat stability and colors. Its softening point is 96 degrees Celsius and it contains 1.7 mg of potassium hydroxide per gram. 收起
Quintone® C210 (ZCT) Zeon Corporation Quintone® C210 (ZCT) is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in hot-melt traffic paints and provides good heat stability and colors. Its softening point is 110 degrees Cel...展开 Quintone® C210 (ZCT) is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in hot-melt traffic paints and provides good heat stability and colors. Its softening point is 110 degrees Celsius and it contains 1.7 mg of potassium hydroxide per gram. 收起
Quintone® D100 Zeon Corporation Quintone® D100 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product is compatible with SBR and EVA and can be used in adhesive tapes and hot melt adhesives. Its softening point is 99 degree...展开 Quintone® D100 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product is compatible with SBR and EVA and can be used in adhesive tapes and hot melt adhesives. Its softening point is 99 degrees Celsius and contains less than 0.1 mg of potassium hydroxide per gram. 收起
Quintone® E200SN Zeon Corporation Quintone® E200SN is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in rubber adhesives. Its softening point is 102 degrees Celsius and it contains 1.7 mg of potassium hydroxi...展开 Quintone® E200SN is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in rubber adhesives. Its softening point is 102 degrees Celsius and it contains 1.7 mg of potassium hydroxide per gram. 收起
Quintone® G100B Zeon Corporation Quintone® G100B is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in EVA hot-melt adhesives and rubber modifiers. Its softening point is 100 degrees Celsius and it contains l...展开 Quintone® G100B is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in EVA hot-melt adhesives and rubber modifiers. Its softening point is 100 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. 收起
Quintone® G115 Zeon Corporation Quintone® G115 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in EVA hot melt adhesives. Its softening point is 115 degrees Celsius and it contains less than 0.1 mg of pot...展开 Quintone® G115 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in EVA hot melt adhesives. Its softening point is 115 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. 收起
Quintone® K100 Zeon Corporation Quintone® K100 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in SIS adhesives. Its softening point is 101 degrees Celsius and it contains less than 0.1 mg of potassi...展开 Quintone® K100 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in SIS adhesives. Its softening point is 101 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. 收起
Quintone® M100 Zeon Corporation Quintone® M100 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in SIS adhesives. Its softening point is 95 degrees Celsius and it contains less than 0.1 mg of potassiu...展开 Quintone® M100 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in SIS adhesives. Its softening point is 95 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. 收起
Quintone® N180 Zeon Corporation Quintone® N180 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in SIS hot-melt adhesives. Its softening point is 80 degrees Celsius and it contains less than 0.1 mg of pota...展开 Quintone® N180 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in SIS hot-melt adhesives. Its softening point is 80 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. 收起
Quintone® N295 Zeon Corporation Quintone® N295 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in SIS adhesives. Its softening point is 95 degrees Celsius and it contains 0.5 mg of potassium hydroxide per...展开 Quintone® N295 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in SIS adhesives. Its softening point is 95 degrees Celsius and it contains 0.5 mg of potassium hydroxide per gram. 收起
Quintone® P195N Zeon Corporation Quintone® P195N is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product is compatible with SBS and EVA and can be used in light-colored hot melt adhesives. Its softening point is 94 degrees Ce...展开 Quintone® P195N is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product is compatible with SBS and EVA and can be used in light-colored hot melt adhesives. Its softening point is 94 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. 收起
Quintone® R100 Zeon Corporation Quintone® R100 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in SIS adhesives. Its softening point is 96 degrees Celsius and it contains less than 0.1 mg of potassiu...展开 Quintone® R100 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in SIS adhesives. Its softening point is 96 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. 收起
Quintone® S100 Zeon Corporation Quintone® S100 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in SIS adhesives. Its softening point is 94 degrees Celsius and it contains less than 0.1 mg of potassium hyd...展开 Quintone® S100 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in SIS adhesives. Its softening point is 94 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. 收起
Quintone® U185 Zeon Corporation Quintone® U185 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product is compatible with SBR and EVA and can be used in adhesive tapes and hot melt adhesives. Its softening point is 86 degree...展开 Quintone® U185 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product is compatible with SBR and EVA and can be used in adhesive tapes and hot melt adhesives. Its softening point is 86 degrees Celsius and contains less than 0.1 mg of potassium hydroxide per gram. 收起
Quintone® U190 Zeon Corporation Quintone® U190 is a petroleum resin derivative made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in SIS adhesives. Its softening point is 89 degrees Celsius and it contains less than 0.1 mg of po...展开 Quintone® U190 is a petroleum resin derivative made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in SIS adhesives. Its softening point is 89 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. 收起
S-Butyl Acetate (SBA) TOP Solvent Company Limited S-Butyl acetate (SBA) is a transparent volatile liquid with a distinguishing ester odor. It is miscible in various solvents such as alcohols, ketones, glycol ethers, aromatic hydrocarbons and aliphatic hydrocarbons. It is primarily used in the producing a...展开 S-Butyl acetate (SBA) is a transparent volatile liquid with a distinguishing ester odor. It is miscible in various solvents such as alcohols, ketones, glycol ethers, aromatic hydrocarbons and aliphatic hydrocarbons. It is primarily used in the producing and the processing of paints, coatings, printing inks, adhesives.. 收起
TOPSol 60/145 TOP Solvent Company Limited TOPSol 60/145 is a transparent liquid with a wide boiling range and is a rapidly evaporating solvent that is widely used in the rubber and related industry. It is solvent with naphtha (petroleum) and light aliphatic and is built up of n-Hexane and Toluene...展开 TOPSol 60/145 is a transparent liquid with a wide boiling range and is a rapidly evaporating solvent that is widely used in the rubber and related industry. It is solvent with naphtha (petroleum) and light aliphatic and is built up of n-Hexane and Toluene making it a highly flammable liquid. TOPSol 60/145 is primarily used as a solvent in adhesives and sealants. 收起
TOPSol A100 TOP Solvent Company Limited TOPSol A100 Solvent is a clear transparent liquid with an aromatic odor. It has a wide boiling range and is a mixture of predominantly C9 hydrocarbons with 98% aromatic. It has good solvent properties and is low in sulfur content. This product is primaril...展开 TOPSol A100 Solvent is a clear transparent liquid with an aromatic odor. It has a wide boiling range and is a mixture of predominantly C9 hydrocarbons with 98% aromatic. It has good solvent properties and is low in sulfur content. This product is primarily used as a solvent in paints and coatings. 收起
TOPSol A150 TOP Solvent Company Limited TOPSol A150 Solvent is a clear transparent liquid with an aromatic odor. It has a high boiling point and is a mixture of predominantly C9-11 hydrocarbons with >98% aromatic. It has good solvent properties and is low in sulfur content and has a high flash ...展开 TOPSol A150 Solvent is a clear transparent liquid with an aromatic odor. It has a high boiling point and is a mixture of predominantly C9-11 hydrocarbons with >98% aromatic. It has good solvent properties and is low in sulfur content and has a high flash point. This product is primarily used as a solvent in paints and coatings. 收起
TOPSol A150ND TOP Solvent Company Limited TOPSol A150ND Solvent is a clear transparent liquid with an aromatic odor. This product is a mixture of predominantly C9-10 with aromatic hydrocarbons and it has less that 1% naphthalene content. It has good solvent properties and is low in sulfur content...展开 TOPSol A150ND Solvent is a clear transparent liquid with an aromatic odor. This product is a mixture of predominantly C9-10 with aromatic hydrocarbons and it has less that 1% naphthalene content. It has good solvent properties and is low in sulfur content and has a high flash point. This product is primarily used as a solvent in paints and coatings. 收起
TOPSol BF TOP Solvent Company Limited TOPSol BF is a transparent liquid that is a quick evaporating hydrocarbon solvent. This product is a solvent that has undergone a great degree of general refining that result in a low level of impurities such as sulfur, olefins, benzene and all aromatics....展开 TOPSol BF is a transparent liquid that is a quick evaporating hydrocarbon solvent. This product is a solvent that has undergone a great degree of general refining that result in a low level of impurities such as sulfur, olefins, benzene and all aromatics. TOPSol BF is primarily used as a solvent in adhesives and sealants. 收起
TOPSol PM TOP Solvent Company Limited TOPSol PM also sometimes known as Propylene glycol methyl ether (PGME), is a colorless, hygroscopic solvent with a similar properties to ethylene oxide-based glycol ethers such as the volatility, viscosity and solvent strength. TOPSol PM is primarily used...展开 TOPSol PM also sometimes known as Propylene glycol methyl ether (PGME), is a colorless, hygroscopic solvent with a similar properties to ethylene oxide-based glycol ethers such as the volatility, viscosity and solvent strength. TOPSol PM is primarily used as a solvent in printing inks, adhesives, paints and coatings. 收起
TOPSol PMA TOP Solvent Company Limited TOPSol PMA is also known as Propylene glycol methyl ether acetate (PGMEA). This product is a colorless, neutral propylene oxide-based glycol ether acetate and has a slight odor and a volatility. It has a viscosity and solvent power that is similar to ethy...展开 TOPSol PMA is also known as Propylene glycol methyl ether acetate (PGMEA). This product is a colorless, neutral propylene oxide-based glycol ether acetate and has a slight odor and a volatility. It has a viscosity and solvent power that is similar to ethylene glycol-based and glycol ether acetates. TOPSol PMA is primarily used as a solvent in printing inks, paints and coatings. 收起
TOPSol X2000 TOP Solvent Company Limited TOPSol X2000 is a transparent liquid with a wide boiling range and is a rapidly evaporating solvent that is broadly used in the rubber and related industry. TOPSol X2000 is primarily used as a solvent in adhesives and sealants.
Toluene TOP Solvent Company Limited Toluene is a clear fast evaporating, highly refined aromatic solvent on a technical grade. This product meets many specifications such as that of Nitration grade Toluene (ASTM D841). The boiling range of this flexible solvent is not broader than 1.0°C. I...展开 Toluene is a clear fast evaporating, highly refined aromatic solvent on a technical grade. This product meets many specifications such as that of Nitration grade Toluene (ASTM D841). The boiling range of this flexible solvent is not broader than 1.0°C. In some areas this solvent is hard to come by. The primary use of this product is in printing inks, adhesives, paints and coatings. 收起
WS 200 TOP Solvent Company Limited WS 200 is a clear colored mineral liquid that is derived from petroleum. The White spirit range consists of products that are water-white and typically boil between 150 and 200°C. WS 200 is a combination of natural gases like paraffins, cycloparaffins and...展开 WS 200 is a clear colored mineral liquid that is derived from petroleum. The White spirit range consists of products that are water-white and typically boil between 150 and 200°C. WS 200 is a combination of natural gases like paraffins, cycloparaffins and aromatics.The primary use of this product is in printing inks, paints and coatings. 收起
Xylene TOP Solvent Company Limited Xylene is a clear is a quick evaporating hydrocarbon solvent that has a flash point >21°C. It consists essentially of the three different isomers which are ortho, meta and para xylene. This product also contains the organic compound ethylbenzene which is ...展开 Xylene is a clear is a quick evaporating hydrocarbon solvent that has a flash point >21°C. It consists essentially of the three different isomers which are ortho, meta and para xylene. This product also contains the organic compound ethylbenzene which is highly flammable and has a similar odor to gasoline. Xylene is primarily used in printing inks, adhesives, paints and coatings. 收起
YGA100-1 Nanjing Yuangang Fine Chemical Co., Ltd. YGA100-1 is a hydrogenated petroleum resin, in white granular form. This product can be used in coatings, adhesives, hot melt road marking paints, inks, and paint additives.
YGA100-2 Nanjing Yuangang Fine Chemical Co., Ltd. YGA100-2 is a hydrogenated petroleum resin, in white granular form. This product can be used in coatings, adhesives, hot melt road marking paints, inks, and paint additives.
YGA110-1 Nanjing Yuangang Fine Chemical Co., Ltd. YGA110-1 is a hydrogenated petroleum resin, in white granular form. This product can be used in coatings, adhesives, hot melt road marking paints, inks, and paint additives.
YGA110-2 Nanjing Yuangang Fine Chemical Co., Ltd. YGA110-2 is a hydrogenated petroleum resin, in white granular form. This product can be used in coatings, adhesives, hot melt road marking paints, inks, and paint additives.
YGB100-1 Nanjing Yuangang Fine Chemical Co., Ltd. YGB100-1 is a hydrogenated petroleum resin, in white granular form. This product can be used in hot melt road marking paints to increase toughness, hardness, and adhesion.
YGB100-2 Nanjing Yuangang Fine Chemical Co., Ltd. YGB100-2 is a hydrogenated petroleum resin, in white granular form. This product can be used in hot melt road marking paints to increase toughness, hardness, and adhesion.